aboutsummaryrefslogtreecommitdiff
path: root/include/asm-x86/mach-visws/piix4.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-x86/mach-visws/piix4.h')
-rw-r--r--include/asm-x86/mach-visws/piix4.h107
1 files changed, 107 insertions, 0 deletions
diff --git a/include/asm-x86/mach-visws/piix4.h b/include/asm-x86/mach-visws/piix4.h
new file mode 100644
index 00000000000..83ea4f46e41
--- /dev/null
+++ b/include/asm-x86/mach-visws/piix4.h
@@ -0,0 +1,107 @@
+#ifndef __I386_SGI_PIIX_H
+#define __I386_SGI_PIIX_H
+
+/*
+ * PIIX4 as used on SGI Visual Workstations
+ */
+
+#define PIIX_PM_START 0x0F80
+
+#define SIO_GPIO_START 0x0FC0
+
+#define SIO_PM_START 0x0FC8
+
+#define PMBASE PIIX_PM_START
+#define GPIREG0 (PMBASE+0x30)
+#define GPIREG(x) (GPIREG0+((x)/8))
+#define GPIBIT(x) (1 << ((x)%8))
+
+#define PIIX_GPI_BD_ID1 18
+#define PIIX_GPI_BD_ID2 19
+#define PIIX_GPI_BD_ID3 20
+#define PIIX_GPI_BD_ID4 21
+#define PIIX_GPI_BD_REG GPIREG(PIIX_GPI_BD_ID1)
+#define PIIX_GPI_BD_MASK (GPIBIT(PIIX_GPI_BD_ID1) | \
+ GPIBIT(PIIX_GPI_BD_ID2) | \
+ GPIBIT(PIIX_GPI_BD_ID3) | \
+ GPIBIT(PIIX_GPI_BD_ID4) )
+
+#define PIIX_GPI_BD_SHIFT (PIIX_GPI_BD_ID1 % 8)
+
+#define SIO_INDEX 0x2e
+#define SIO_DATA 0x2f
+
+#define SIO_DEV_SEL 0x7
+#define SIO_DEV_ENB 0x30
+#define SIO_DEV_MSB 0x60
+#define SIO_DEV_LSB 0x61
+
+#define SIO_GP_DEV 0x7
+
+#define SIO_GP_BASE SIO_GPIO_START
+#define SIO_GP_MSB (SIO_GP_BASE>>8)
+#define SIO_GP_LSB (SIO_GP_BASE&0xff)
+
+#define SIO_GP_DATA1 (SIO_GP_BASE+0)
+
+#define SIO_PM_DEV 0x8
+
+#define SIO_PM_BASE SIO_PM_START
+#define SIO_PM_MSB (SIO_PM_BASE>>8)
+#define SIO_PM_LSB (SIO_PM_BASE&0xff)
+#define SIO_PM_INDEX (SIO_PM_BASE+0)
+#define SIO_PM_DATA (SIO_PM_BASE+1)
+
+#define SIO_PM_FER2 0x1
+
+#define SIO_PM_GP_EN 0x80
+
+
+
+/*
+ * This is the dev/reg where generating a config cycle will
+ * result in a PCI special cycle.
+ */
+#define SPECIAL_DEV 0xff
+#define SPECIAL_REG 0x00
+
+/*
+ * PIIX4 needs to see a special cycle with the following data
+ * to be convinced the processor has gone into the stop grant
+ * state. PIIX4 insists on seeing this before it will power
+ * down a system.
+ */
+#define PIIX_SPECIAL_STOP 0x00120002
+
+#define PIIX4_RESET_PORT 0xcf9
+#define PIIX4_RESET_VAL 0x6
+
+#define PMSTS_PORT 0xf80 // 2 bytes PM Status
+#define PMEN_PORT 0xf82 // 2 bytes PM Enable
+#define PMCNTRL_PORT 0xf84 // 2 bytes PM Control
+
+#define PM_SUSPEND_ENABLE 0x2000 // start sequence to suspend state
+
+/*
+ * PMSTS and PMEN I/O bit definitions.
+ * (Bits are the same in both registers)
+ */
+#define PM_STS_RSM (1<<15) // Resume Status
+#define PM_STS_PWRBTNOR (1<<11) // Power Button Override
+#define PM_STS_RTC (1<<10) // RTC status
+#define PM_STS_PWRBTN (1<<8) // Power Button Pressed?
+#define PM_STS_GBL (1<<5) // Global Status
+#define PM_STS_BM (1<<4) // Bus Master Status
+#define PM_STS_TMROF (1<<0) // Timer Overflow Status.
+
+/*
+ * Stop clock GPI register
+ */
+#define PIIX_GPIREG0 (0xf80 + 0x30)
+
+/*
+ * Stop clock GPI bit in GPIREG0
+ */
+#define PIIX_GPI_STPCLK 0x4 // STPCLK signal routed back in
+
+#endif