1 files changed, 0 insertions, 132 deletions
diff --git a/include/asm-x86/olpc.h b/include/asm-x86/olpc.h
deleted file mode 100644
index 97d47133486..00000000000
--- a/include/asm-x86/olpc.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/* OLPC machine specific definitions */
-
-#ifndef ASM_OLPC_H_
-#define ASM_OLPC_H_
-
-#include <asm/geode.h>
-
-struct olpc_platform_t {
-	int flags;
-	uint32_t boardrev;
-	int ecver;
-};
-
-#define OLPC_F_PRESENT		0x01
-#define OLPC_F_DCON		0x02
-#define OLPC_F_VSA		0x04
-
-#ifdef CONFIG_OLPC
-
-extern struct olpc_platform_t olpc_platform_info;
-
-/*
- * OLPC board IDs contain the major build number within the mask 0x0ff0,
- * and the minor build number withing 0x000f.  Pre-builds have a minor
- * number less than 8, and normal builds start at 8.  For example, 0x0B10
- * is a PreB1, and 0x0C18 is a C1.
- */
-
-static inline uint32_t olpc_board(uint8_t id)
-{
-	return (id << 4) | 0x8;
-}
-
-static inline uint32_t olpc_board_pre(uint8_t id)
-{
-	return id << 4;
-}
-
-static inline int machine_is_olpc(void)
-{
-	return (olpc_platform_info.flags & OLPC_F_PRESENT) ? 1 : 0;
-}
-
-/*
- * The DCON is OLPC's Display Controller.  It has a number of unique
- * features that we might want to take advantage of..
- */
-static inline int olpc_has_dcon(void)
-{
-	return (olpc_platform_info.flags & OLPC_F_DCON) ? 1 : 0;
-}
-
-/*
- * The VSA is software from AMD that typical Geode bioses will include.
- * It is used to emulate the PCI bus, VGA, etc.  OLPC's Open Firmware does
- * not include the VSA; instead, PCI is emulated by the kernel.
- *
- * The VSA is described further in arch/x86/pci/olpc.c.
- */
-static inline int olpc_has_vsa(void)
-{
-	return (olpc_platform_info.flags & OLPC_F_VSA) ? 1 : 0;
-}
-
-/*
- * The "Mass Production" version of OLPC's XO is identified as being model
- * C2.  During the prototype phase, the following models (in chronological
- * order) were created: A1, B1, B2, B3, B4, C1.  The A1 through B2 models
- * were based on Geode GX CPUs, and models after that were based upon
- * Geode LX CPUs.  There were also some hand-assembled models floating
- * around, referred to as PreB1, PreB2, etc.
- */
-static inline int olpc_board_at_least(uint32_t rev)
-{
-	return olpc_platform_info.boardrev >= rev;
-}
-
-#else
-
-static inline int machine_is_olpc(void)
-{
-	return 0;
-}
-
-static inline int olpc_has_dcon(void)
-{
-	return 0;
-}
-
-static inline int olpc_has_vsa(void)
-{
-	return 0;
-}
-
-#endif
-
-/* EC related functions */
-
-extern int olpc_ec_cmd(unsigned char cmd, unsigned char *inbuf, size_t inlen,
-		unsigned char *outbuf, size_t outlen);
-
-extern int olpc_ec_mask_set(uint8_t bits);
-extern int olpc_ec_mask_unset(uint8_t bits);
-
-/* EC commands */
-
-#define EC_FIRMWARE_REV		0x08
-
-/* SCI source values */
-
-#define EC_SCI_SRC_EMPTY	0x00
-#define EC_SCI_SRC_GAME		0x01
-#define EC_SCI_SRC_BATTERY	0x02
-#define EC_SCI_SRC_BATSOC	0x04
-#define EC_SCI_SRC_BATERR	0x08
-#define EC_SCI_SRC_EBOOK	0x10
-#define EC_SCI_SRC_WLAN		0x20
-#define EC_SCI_SRC_ACPWR	0x40
-#define EC_SCI_SRC_ALL		0x7F
-
-/* GPIO assignments */
-
-#define OLPC_GPIO_MIC_AC	geode_gpio(1)
-#define OLPC_GPIO_DCON_IRQ	geode_gpio(7)
-#define OLPC_GPIO_THRM_ALRM	geode_gpio(10)
-#define OLPC_GPIO_SMB_CLK	geode_gpio(14)
-#define OLPC_GPIO_SMB_DATA	geode_gpio(15)
-#define OLPC_GPIO_WORKAUX	geode_gpio(24)
-#define OLPC_GPIO_LID		geode_gpio(26)
-#define OLPC_GPIO_ECSCI		geode_gpio(27)
-
-#endif