diff options
Diffstat (limited to 'include/asm-xtensa/xtensa/xt2000-uart.h')
| -rw-r--r-- | include/asm-xtensa/xtensa/xt2000-uart.h | 155 |
1 files changed, 0 insertions, 155 deletions
diff --git a/include/asm-xtensa/xtensa/xt2000-uart.h b/include/asm-xtensa/xtensa/xt2000-uart.h deleted file mode 100644 index 0154460f0ed..00000000000 --- a/include/asm-xtensa/xtensa/xt2000-uart.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef _uart_h_included_ -#define _uart_h_included_ - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/xt2000-uart.h -- NatSemi PC16552D DUART - * definitions - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include <xtensa/xt2000.h> - - -/* 16550 UART DEVICE REGISTERS - The XT2000 board aligns each register to a 32-bit word but the UART device only uses - one byte of the word, which is the least-significant byte regardless of the - endianness of the core (ie. byte offset 0 for little-endian and 3 for big-endian). - So if using word accesses then endianness doesn't matter. - The macros provided here do that. -*/ -struct uart_dev_s { - union { - unsigned int rxb; /* DLAB=0: receive buffer, read-only */ - unsigned int txb; /* DLAB=0: transmit buffer, write-only */ - unsigned int dll; /* DLAB=1: divisor, least-significant byte latch (was write-only?) */ - } w0; - union { - unsigned int ier; /* DLAB=0: interrupt-enable register (was write-only?) */ - unsigned int dlm; /* DLAB=1: divisor, most-significant byte latch (was write-only?) */ - } w1; - - union { - unsigned int isr; /* DLAB=0: interrupt status register, read-only */ - unsigned int fcr; /* DLAB=0: FIFO control register, write-only */ - unsigned int afr; /* DLAB=1: alternate function register */ - } w2; - - unsigned int lcr; /* line control-register, write-only */ - unsigned int mcr; /* modem control-regsiter, write-only */ - unsigned int lsr; /* line status register, read-only */ - unsigned int msr; /* modem status register, read-only */ - unsigned int scr; /* scratch regsiter, read/write */ -}; - -#define _RXB(u) ((u)->w0.rxb) -#define _TXB(u) ((u)->w0.txb) -#define _DLL(u) ((u)->w0.dll) -#define _IER(u) ((u)->w1.ier) -#define _DLM(u) ((u)->w1.dlm) -#define _ISR(u) ((u)->w2.isr) -#define _FCR(u) ((u)->w2.fcr) -#define _AFR(u) ((u)->w2.afr) -#define _LCR(u) ((u)->lcr) -#define _MCR(u) ((u)->mcr) -#define _LSR(u) ((u)->lsr) -#define _MSR(u) ((u)->msr) -#define _SCR(u) ((u)->scr) - -typedef volatile struct uart_dev_s uart_dev_t; - -/* IER bits */ -#define RCVR_DATA_REG_INTENABLE 0x01 -#define XMIT_HOLD_REG_INTENABLE 0x02 -#define RCVR_STATUS_INTENABLE 0x04 -#define MODEM_STATUS_INTENABLE 0x08 - -/* FCR bits */ -#define _FIFO_ENABLE 0x01 -#define RCVR_FIFO_RESET 0x02 -#define XMIT_FIFO_RESET 0x04 -#define DMA_MODE_SELECT 0x08 -#define RCVR_TRIGGER_LSB 0x40 -#define RCVR_TRIGGER_MSB 0x80 - -/* AFR bits */ -#define AFR_CONC_WRITE 0x01 -#define AFR_BAUDOUT_SEL 0x02 -#define AFR_RXRDY_SEL 0x04 - -/* ISR bits */ -#define INT_STATUS(r) ((r)&1) -#define INT_PRIORITY(r) (((r)>>1)&0x7) - -/* LCR bits */ -#define WORD_LENGTH(n) (((n)-5)&0x3) -#define STOP_BIT_ENABLE 0x04 -#define PARITY_ENABLE 0x08 -#define EVEN_PARITY 0x10 -#define FORCE_PARITY 0x20 -#define XMIT_BREAK 0x40 -#define DLAB_ENABLE 0x80 - -/* MCR bits */ -#define _DTR 0x01 -#define _RTS 0x02 -#define _OP1 0x04 -#define _OP2 0x08 -#define LOOP_BACK 0x10 - -/* LSR Bits */ -#define RCVR_DATA_READY 0x01 -#define OVERRUN_ERROR 0x02 -#define PARITY_ERROR 0x04 -#define FRAMING_ERROR 0x08 -#define BREAK_INTERRUPT 0x10 -#define XMIT_HOLD_EMPTY 0x20 -#define XMIT_EMPTY 0x40 -#define FIFO_ERROR 0x80 -#define RCVR_READY(u) (_LSR(u)&RCVR_DATA_READY) -#define XMIT_READY(u) (_LSR(u)&XMIT_HOLD_EMPTY) - -/* MSR bits */ -#define _RDR 0x01 -#define DELTA_DSR 0x02 -#define DELTA_RI 0x04 -#define DELTA_CD 0x08 -#define _CTS 0x10 -#define _DSR 0x20 -#define _RI 0x40 -#define _CD 0x80 - -/* prototypes */ -void uart_init( uart_dev_t *u, int bitrate ); -void uart_out( uart_dev_t *u, char c ); -void uart_puts( uart_dev_t *u, char *s ); -char uart_in( uart_dev_t *u ); -void uart_enable_rcvr_int( uart_dev_t *u ); -void uart_disable_rcvr_int( uart_dev_t *u ); - -#ifdef DUART16552_1_VADDR -/* DUART present. */ -#define DUART_1_BASE (*(uart_dev_t*)DUART16552_1_VADDR) -#define DUART_2_BASE (*(uart_dev_t*)DUART16552_2_VADDR) -#define UART1_PUTS(s) uart_puts( &DUART_1_BASE, s ) -#define UART2_PUTS(s) uart_puts( &DUART_2_BASE, s ) -#else -/* DUART not configured, use dummy placeholders to allow compiles to work. */ -#define DUART_1_BASE (*(uart_dev_t*)0) -#define DUART_2_BASE (*(uart_dev_t*)0) -#define UART1_PUTS(s) -#define UART2_PUTS(s) -#endif - -/* Compute 16-bit divisor for baudrate generator, with rounding: */ -#define DUART_DIVISOR(crystal,speed) (((crystal)/16 + (speed)/2)/(speed)) - -#endif /*_uart_h_included_*/ - |