4 files changed, 24 insertions, 20 deletions

diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index b6f2fdae65c..73620ef8336 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -61,7 +61,7 @@ struct mtd_info {
 	u_int32_t flags;
 	u_int32_t size;	 // Total size of the MTD
 
-	/* "Major" erase size for the device. Naïve users may take this
+	/* "Major" erase size for the device. Naïve users may take this
 	 * to be the only erase size available, or may use the more detailed
 	 * information below if they desire
 	 */
diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h
index 7419b5fab13..3f5919f2e9d 100644
--- a/include/linux/mtd/onenand.h
+++ b/include/linux/mtd/onenand.h
@@ -35,6 +35,8 @@ typedef enum {
 	FL_SYNCING,
 	FL_UNLOCKING,
 	FL_LOCKING,
+	FL_RESETING,
+	FL_OTPING,
 	FL_PM_SUSPENDED,
 } onenand_state_t;
 
@@ -130,6 +132,9 @@ struct onenand_chip {
 #define ONENAND_SET_SYS_CFG1(v, this)					\
 	(this->write_word(v, this->base + ONENAND_REG_SYS_CFG1))
 
+/* Check byte access in OneNAND */
+#define ONENAND_CHECK_BYTE_ACCESS(addr)		(addr & 0x1)
+
 /*
  * Options bits
  */
diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h
index d7832ef8ed6..4a72818d254 100644
--- a/include/linux/mtd/onenand_regs.h
+++ b/include/linux/mtd/onenand_regs.h
@@ -112,6 +112,7 @@
 #define ONENAND_CMD_LOCK_TIGHT		(0x2C)
 #define ONENAND_CMD_ERASE		(0x94)
 #define ONENAND_CMD_RESET		(0xF0)
+#define ONENAND_CMD_OTP_ACCESS		(0x65)
 #define ONENAND_CMD_READID		(0x90)
 
 /* NOTE: Those are not *REAL* commands */
@@ -152,6 +153,8 @@
 #define ONENAND_CTRL_ERASE		(1 << 11)
 #define ONENAND_CTRL_ERROR		(1 << 10)
 #define ONENAND_CTRL_RSTB		(1 << 7)
+#define ONENAND_CTRL_OTP_L		(1 << 6)
+#define ONENAND_CTRL_OTP_BL		(1 << 5)
 
 /*
  * Interrupt Status Register F241h (R)
@@ -177,4 +180,9 @@
 #define ONENAND_ECC_2BIT		(1 << 1)
 #define ONENAND_ECC_2BIT_ALL		(0xAAAA)
 
+/*
+ * One-Time Programmable (OTP)
+ */
+#define ONENAND_OTP_LOCK_OFFSET		(14)
+
 #endif	/* __ONENAND_REG_H */
diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h
index c7b8bcdef01..86831e3594f 100644
--- a/include/linux/mtd/physmap.h
+++ b/include/linux/mtd/physmap.h
@@ -15,33 +15,26 @@
  */
 
 #ifndef __LINUX_MTD_PHYSMAP__
-
-#include <linux/config.h>
-
-#if defined(CONFIG_MTD_PHYSMAP)
+#define __LINUX_MTD_PHYSMAP__
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 
-/*
- * The map_info for physmap.  Board can override size, buswidth, phys,
- * (*set_vpp)(), etc in their initial setup routine.
- */
-extern struct map_info physmap_map;
+struct physmap_flash_data {
+	unsigned int		width;
+	void			(*set_vpp)(struct map_info *, int);
+	unsigned int		nr_parts;
+	struct mtd_partition	*parts;
+};
 
 /*
  * Board needs to specify the exact mapping during their setup time.
  */
-static inline void physmap_configure(unsigned long addr, unsigned long size, int bankwidth, void (*set_vpp)(struct map_info *, int) )
-{
-	physmap_map.phys = addr;
-	physmap_map.size = size;
-	physmap_map.bankwidth = bankwidth;
-	physmap_map.set_vpp = set_vpp;
-}
+void physmap_configure(unsigned long addr, unsigned long size,
+		int bankwidth, void (*set_vpp)(struct map_info *, int) );
 
-#if defined(CONFIG_MTD_PARTITIONS)
+#ifdef CONFIG_MTD_PARTITIONS
 
 /*
  * Machines that wish to do flash partition may want to call this function in
@@ -55,7 +48,5 @@ static inline void physmap_configure(unsigned long addr, unsigned long size, int
 void physmap_set_partitions(struct mtd_partition *parts, int num_parts);
 
 #endif /* defined(CONFIG_MTD_PARTITIONS) */
-#endif /* defined(CONFIG_MTD) */
 
 #endif /* __LINUX_MTD_PHYSMAP__ */
-