aboutsummaryrefslogtreecommitdiff
path: root/include/linux/regulator/consumer.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/regulator/consumer.h')
-rw-r--r--include/linux/regulator/consumer.h284
1 files changed, 284 insertions, 0 deletions
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
new file mode 100644
index 00000000000..afdc4558bb9
--- /dev/null
+++ b/include/linux/regulator/consumer.h
@@ -0,0 +1,284 @@
+/*
+ * consumer.h -- SoC Regulator consumer support.
+ *
+ * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Author: Liam Girdwood <lg@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Regulator Consumer Interface.
+ *
+ * A Power Management Regulator framework for SoC based devices.
+ * Features:-
+ * o Voltage and current level control.
+ * o Operating mode control.
+ * o Regulator status.
+ * o sysfs entries for showing client devices and status
+ *
+ * EXPERIMENTAL FEATURES:
+ * Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
+ * to use most efficient operating mode depending upon voltage and load and
+ * is transparent to client drivers.
+ *
+ * e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
+ * IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
+ * idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
+ * but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
+ * efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
+ * in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_CONSUMER_H_
+#define __LINUX_REGULATOR_CONSUMER_H_
+
+/*
+ * Regulator operating modes.
+ *
+ * Regulators can run in a variety of different operating modes depending on
+ * output load. This allows further system power savings by selecting the
+ * best (and most efficient) regulator mode for a desired load.
+ *
+ * Most drivers will only care about NORMAL. The modes below are generic and
+ * will probably not match the naming convention of your regulator data sheet
+ * but should match the use cases in the datasheet.
+ *
+ * In order of power efficiency (least efficient at top).
+ *
+ * Mode Description
+ * FAST Regulator can handle fast changes in it's load.
+ * e.g. useful in CPU voltage & frequency scaling where
+ * load can quickly increase with CPU frequency increases.
+ *
+ * NORMAL Normal regulator power supply mode. Most drivers will
+ * use this mode.
+ *
+ * IDLE Regulator runs in a more efficient mode for light
+ * loads. Can be used for devices that have a low power
+ * requirement during periods of inactivity. This mode
+ * may be more noisy than NORMAL and may not be able
+ * to handle fast load switching.
+ *
+ * STANDBY Regulator runs in the most efficient mode for very
+ * light loads. Can be used by devices when they are
+ * in a sleep/standby state. This mode is likely to be
+ * the most noisy and may not be able to handle fast load
+ * switching.
+ *
+ * NOTE: Most regulators will only support a subset of these modes. Some
+ * will only just support NORMAL.
+ *
+ * These modes can be OR'ed together to make up a mask of valid register modes.
+ */
+
+#define REGULATOR_MODE_FAST 0x1
+#define REGULATOR_MODE_NORMAL 0x2
+#define REGULATOR_MODE_IDLE 0x4
+#define REGULATOR_MODE_STANDBY 0x8
+
+/*
+ * Regulator notifier events.
+ *
+ * UNDER_VOLTAGE Regulator output is under voltage.
+ * OVER_CURRENT Regulator output current is too high.
+ * REGULATION_OUT Regulator output is out of regulation.
+ * FAIL Regulator output has failed.
+ * OVER_TEMP Regulator over temp.
+ * FORCE_DISABLE Regulator shut down by software.
+ *
+ * NOTE: These events can be OR'ed together when passed into handler.
+ */
+
+#define REGULATOR_EVENT_UNDER_VOLTAGE 0x01
+#define REGULATOR_EVENT_OVER_CURRENT 0x02
+#define REGULATOR_EVENT_REGULATION_OUT 0x04
+#define REGULATOR_EVENT_FAIL 0x08
+#define REGULATOR_EVENT_OVER_TEMP 0x10
+#define REGULATOR_EVENT_FORCE_DISABLE 0x20
+
+struct regulator;
+
+/**
+ * struct regulator_bulk_data - Data used for bulk regulator operations.
+ *
+ * @supply The name of the supply. Initialised by the user before
+ * using the bulk regulator APIs.
+ * @consumer The regulator consumer for the supply. This will be managed
+ * by the bulk API.
+ *
+ * The regulator APIs provide a series of regulator_bulk_() API calls as
+ * a convenience to consumers which require multiple supplies. This
+ * structure is used to manage data for these calls.
+ */
+struct regulator_bulk_data {
+ const char *supply;
+ struct regulator *consumer;
+};
+
+#if defined(CONFIG_REGULATOR)
+
+/* regulator get and put */
+struct regulator *__must_check regulator_get(struct device *dev,
+ const char *id);
+void regulator_put(struct regulator *regulator);
+
+/* regulator output control and status */
+int regulator_enable(struct regulator *regulator);
+int regulator_disable(struct regulator *regulator);
+int regulator_force_disable(struct regulator *regulator);
+int regulator_is_enabled(struct regulator *regulator);
+
+int regulator_bulk_get(struct device *dev, int num_consumers,
+ struct regulator_bulk_data *consumers);
+int regulator_bulk_enable(int num_consumers,
+ struct regulator_bulk_data *consumers);
+int regulator_bulk_disable(int num_consumers,
+ struct regulator_bulk_data *consumers);
+void regulator_bulk_free(int num_consumers,
+ struct regulator_bulk_data *consumers);
+
+int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
+int regulator_get_voltage(struct regulator *regulator);
+int regulator_set_current_limit(struct regulator *regulator,
+ int min_uA, int max_uA);
+int regulator_get_current_limit(struct regulator *regulator);
+
+int regulator_set_mode(struct regulator *regulator, unsigned int mode);
+unsigned int regulator_get_mode(struct regulator *regulator);
+int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
+
+/* regulator notifier block */
+int regulator_register_notifier(struct regulator *regulator,
+ struct notifier_block *nb);
+int regulator_unregister_notifier(struct regulator *regulator,
+ struct notifier_block *nb);
+
+/* driver data - core doesn't touch */
+void *regulator_get_drvdata(struct regulator *regulator);
+void regulator_set_drvdata(struct regulator *regulator, void *data);
+
+#else
+
+/*
+ * Make sure client drivers will still build on systems with no software
+ * controllable voltage or current regulators.
+ */
+static inline struct regulator *__must_check regulator_get(struct device *dev,
+ const char *id)
+{
+ /* Nothing except the stubbed out regulator API should be
+ * looking at the value except to check if it is an error
+ * value so the actual return value doesn't matter.
+ */
+ return (struct regulator *)id;
+}
+static inline void regulator_put(struct regulator *regulator)
+{
+}
+
+static inline int regulator_enable(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_disable(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_is_enabled(struct regulator *regulator)
+{
+ return 1;
+}
+
+static inline int regulator_bulk_get(struct device *dev,
+ int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ return 0;
+}
+
+static inline int regulator_bulk_enable(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ return 0;
+}
+
+static inline int regulator_bulk_disable(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+ return 0;
+}
+
+static inline void regulator_bulk_free(int num_consumers,
+ struct regulator_bulk_data *consumers)
+{
+}
+
+static inline int regulator_set_voltage(struct regulator *regulator,
+ int min_uV, int max_uV)
+{
+ return 0;
+}
+
+static inline int regulator_get_voltage(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_set_current_limit(struct regulator *regulator,
+ int min_uA, int max_uA)
+{
+ return 0;
+}
+
+static inline int regulator_get_current_limit(struct regulator *regulator)
+{
+ return 0;
+}
+
+static inline int regulator_set_mode(struct regulator *regulator,
+ unsigned int mode)
+{
+ return 0;
+}
+
+static inline unsigned int regulator_get_mode(struct regulator *regulator)
+{
+ return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_set_optimum_mode(struct regulator *regulator,
+ int load_uA)
+{
+ return REGULATOR_MODE_NORMAL;
+}
+
+static inline int regulator_register_notifier(struct regulator *regulator,
+ struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int regulator_unregister_notifier(struct regulator *regulator,
+ struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline void *regulator_get_drvdata(struct regulator *regulator)
+{
+ return NULL;
+}
+
+static inline void regulator_set_drvdata(struct regulator *regulator,
+ void *data)
+{
+}
+
+#endif
+
+#endif