diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/usb.h | 196 | ||||
| -rw-r--r-- | include/linux/usb/audio.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/cdc.h | 4 | ||||
| -rw-r--r-- | include/linux/usb/ch9.h | 17 | ||||
| -rw-r--r-- | include/linux/usb/g_printer.h | 4 | ||||
| -rw-r--r-- | include/linux/usb/gadget.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/gadgetfs.h | 16 | ||||
| -rw-r--r-- | include/linux/usb/input.h | 8 | ||||
| -rw-r--r-- | include/linux/usb/iowarrior.h | 6 | ||||
| -rw-r--r-- | include/linux/usb/isp116x.h | 6 | ||||
| -rw-r--r-- | include/linux/usb/midi.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/net2280.h | 9 | ||||
| -rw-r--r-- | include/linux/usb/otg.h | 6 | ||||
| -rw-r--r-- | include/linux/usb/quirks.h | 5 | ||||
| -rw-r--r-- | include/linux/usb/rndis_host.h | 9 | ||||
| -rw-r--r-- | include/linux/usb/serial.h | 21 | ||||
| -rw-r--r-- | include/linux/usb/sl811.h | 5 | ||||
| -rw-r--r-- | include/linux/usb/usbnet.h | 8 | ||||
| -rw-r--r-- | include/linux/usb_usual.h | 1 | ||||
| -rw-r--r-- | include/linux/usbdevice_fs.h | 7 |
20 files changed, 194 insertions, 140 deletions
diff --git a/include/linux/usb.h b/include/linux/usb.h index 583e0481dfa..c08689ea9b4 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -23,6 +23,7 @@ struct usb_device; struct usb_driver; +struct wusb_dev; /*-------------------------------------------------------------------------*/ @@ -341,103 +342,146 @@ struct usb_bus { struct usb_tt; -/* +/** * struct usb_device - kernel's representation of a USB device - * - * FIXME: Write the kerneldoc! - * + * @devnum: device number; address on a USB bus + * @devpath: device ID string for use in messages (e.g., /port/...) + * @state: device state: configured, not attached, etc. + * @speed: device speed: high/full/low (or error) + * @tt: Transaction Translator info; used with low/full speed dev, highspeed hub + * @ttport: device port on that tt hub + * @toggle: one bit for each endpoint, with ([0] = IN, [1] = OUT) endpoints + * @parent: our hub, unless we're the root + * @bus: bus we're part of + * @ep0: endpoint 0 data (default control pipe) + * @dev: generic device interface + * @descriptor: USB device descriptor + * @config: all of the device's configs + * @actconfig: the active configuration + * @ep_in: array of IN endpoints + * @ep_out: array of OUT endpoints + * @rawdescriptors: raw descriptors for each config + * @bus_mA: Current available from the bus + * @portnum: parent port number (origin 1) + * @level: number of USB hub ancestors + * @can_submit: URBs may be submitted + * @discon_suspended: disconnected while suspended + * @persist_enabled: USB_PERSIST enabled for this device + * @have_langid: whether string_langid is valid + * @authorized: policy has said we can use it; + * (user space) policy determines if we authorize this device to be + * used or not. By default, wired USB devices are authorized. + * WUSB devices are not, until we authorize them from user space. + * FIXME -- complete doc + * @authenticated: Crypto authentication passed + * @wusb: device is Wireless USB + * @string_langid: language ID for strings + * @product: iProduct string, if present (static) + * @manufacturer: iManufacturer string, if present (static) + * @serial: iSerialNumber string, if present (static) + * @filelist: usbfs files that are open to this device + * @usb_classdev: USB class device that was created for usbfs device + * access from userspace + * @usbfs_dentry: usbfs dentry entry for the device + * @maxchild: number of ports if hub + * @children: child devices - USB devices that are attached to this hub + * @pm_usage_cnt: usage counter for autosuspend + * @quirks: quirks of the whole device + * @urbnum: number of URBs submitted for the whole device + * @active_duration: total time device is not suspended + * @autosuspend: for delayed autosuspends + * @pm_mutex: protects PM operations + * @last_busy: time of last use + * @autosuspend_delay: in jiffies + * @connect_time: time device was first connected + * @auto_pm: autosuspend/resume in progress + * @do_remote_wakeup: remote wakeup should be enabled + * @reset_resume: needs reset instead of resume + * @autosuspend_disabled: autosuspend disabled by the user + * @autoresume_disabled: autoresume disabled by the user + * @skip_sys_resume: skip the next system resume + * + * Notes: * Usbcore drivers should not set usbdev->state directly. Instead use * usb_set_device_state(). - * - * @authorized: (user space) policy determines if we authorize this - * device to be used or not. By default, wired USB - * devices are authorized. WUSB devices are not, until we - * authorize them from user space. FIXME -- complete doc */ struct usb_device { - int devnum; /* Address on USB bus */ - char devpath [16]; /* Use in messages: /port/port/... */ - enum usb_device_state state; /* configured, not attached, etc */ - enum usb_device_speed speed; /* high/full/low (or error) */ + int devnum; + char devpath [16]; + enum usb_device_state state; + enum usb_device_speed speed; - struct usb_tt *tt; /* low/full speed dev, highspeed hub */ - int ttport; /* device port on that tt hub */ + struct usb_tt *tt; + int ttport; - unsigned int toggle[2]; /* one bit for each endpoint - * ([0] = IN, [1] = OUT) */ + unsigned int toggle[2]; - struct usb_device *parent; /* our hub, unless we're the root */ - struct usb_bus *bus; /* Bus we're part of */ + struct usb_device *parent; + struct usb_bus *bus; struct usb_host_endpoint ep0; - struct device dev; /* Generic device interface */ + struct device dev; - struct usb_device_descriptor descriptor;/* Descriptor */ - struct usb_host_config *config; /* All of the configs */ + struct usb_device_descriptor descriptor; + struct usb_host_config *config; - struct usb_host_config *actconfig;/* the active configuration */ + struct usb_host_config *actconfig; struct usb_host_endpoint *ep_in[16]; struct usb_host_endpoint *ep_out[16]; - char **rawdescriptors; /* Raw descriptors for each config */ + char **rawdescriptors; - unsigned short bus_mA; /* Current available from the bus */ - u8 portnum; /* Parent port number (origin 1) */ - u8 level; /* Number of USB hub ancestors */ + unsigned short bus_mA; + u8 portnum; + u8 level; - unsigned can_submit:1; /* URBs may be submitted */ - unsigned discon_suspended:1; /* Disconnected while suspended */ - unsigned have_langid:1; /* whether string_langid is valid */ - unsigned authorized:1; /* Policy has said we can use it */ - unsigned wusb:1; /* Device is Wireless USB */ - int string_langid; /* language ID for strings */ + unsigned can_submit:1; + unsigned discon_suspended:1; + unsigned persist_enabled:1; + unsigned have_langid:1; + unsigned authorized:1; + unsigned authenticated:1; + unsigned wusb:1; + int string_langid; /* static strings from the device */ - char *product; /* iProduct string, if present */ - char *manufacturer; /* iManufacturer string, if present */ - char *serial; /* iSerialNumber string, if present */ + char *product; + char *manufacturer; + char *serial; struct list_head filelist; #ifdef CONFIG_USB_DEVICE_CLASS struct device *usb_classdev; #endif #ifdef CONFIG_USB_DEVICEFS - struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */ + struct dentry *usbfs_dentry; #endif - /* - * Child devices - these can be either new devices - * (if this is a hub device), or different instances - * of this same device. - * - * Each instance needs its own set of data structures. - */ - int maxchild; /* Number of ports if hub */ + int maxchild; struct usb_device *children[USB_MAXCHILDREN]; - int pm_usage_cnt; /* usage counter for autosuspend */ - u32 quirks; /* quirks of the whole device */ - atomic_t urbnum; /* number of URBs submitted for - the whole device */ + int pm_usage_cnt; + u32 quirks; + atomic_t urbnum; - unsigned long active_duration; /* total time device is not suspended */ + unsigned long active_duration; #ifdef CONFIG_PM - struct delayed_work autosuspend; /* for delayed autosuspends */ - struct mutex pm_mutex; /* protects PM operations */ - - unsigned long last_busy; /* time of last use */ - int autosuspend_delay; /* in jiffies */ - unsigned long connect_time; /* time device was first connected */ - - unsigned auto_pm:1; /* autosuspend/resume in progress */ - unsigned do_remote_wakeup:1; /* remote wakeup should be enabled */ - unsigned reset_resume:1; /* needs reset instead of resume */ - unsigned persist_enabled:1; /* USB_PERSIST enabled for this dev */ - unsigned autosuspend_disabled:1; /* autosuspend and autoresume */ - unsigned autoresume_disabled:1; /* disabled by the user */ - unsigned skip_sys_resume:1; /* skip the next system resume */ + struct delayed_work autosuspend; + struct mutex pm_mutex; + + unsigned long last_busy; + int autosuspend_delay; + unsigned long connect_time; + + unsigned auto_pm:1; + unsigned do_remote_wakeup:1; + unsigned reset_resume:1; + unsigned autosuspend_disabled:1; + unsigned autoresume_disabled:1; + unsigned skip_sys_resume:1; #endif + struct wusb_dev *wusb_dev; }; #define to_usb_device(d) container_of(d, struct usb_device, dev) @@ -898,10 +942,11 @@ struct usbdrv_wrap { * and should normally be the same as the module name. * @probe: Called to see if the driver is willing to manage a particular * interface on a device. If it is, probe returns zero and uses - * dev_set_drvdata() to associate driver-specific data with the + * usb_set_intfdata() to associate driver-specific data with the * interface. It may also use usb_set_interface() to specify the * appropriate altsetting. If unwilling to manage the interface, - * return a negative errno value. + * return -ENODEV, if genuine IO errors occured, an appropriate + * negative errno value. * @disconnect: Called when the interface is no longer accessible, usually * because its device has been (or is being) disconnected or the * driver module is being unloaded. @@ -916,10 +961,7 @@ struct usbdrv_wrap { * @pre_reset: Called by usb_reset_composite_device() when the device * is about to be reset. * @post_reset: Called by usb_reset_composite_device() after the device - * has been reset, or in lieu of @resume following a reset-resume - * (i.e., the device is reset instead of being resumed, as might - * happen if power was lost). The second argument tells which is - * the reason. + * has been reset * @id_table: USB drivers use ID table to support hotplugging. * Export this with MODULE_DEVICE_TABLE(usb,...). This must be set * or your driver's probe function will never get called. @@ -1411,6 +1453,7 @@ extern int usb_submit_urb(struct urb *urb, gfp_t mem_flags); extern int usb_unlink_urb(struct urb *urb); extern void usb_kill_urb(struct urb *urb); extern void usb_kill_anchored_urbs(struct usb_anchor *anchor); +extern void usb_unlink_anchored_urbs(struct usb_anchor *anchor); extern void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor); extern void usb_unanchor_urb(struct urb *urb); extern int usb_wait_anchor_empty_timeout(struct usb_anchor *anchor, @@ -1661,13 +1704,12 @@ extern void usb_unregister_notify(struct notifier_block *nb); #define dbg(format, arg...) do {} while (0) #endif -#define err(format, arg...) printk(KERN_ERR "%s: " format "\n" , \ - __FILE__ , ## arg) -#define info(format, arg...) printk(KERN_INFO "%s: " format "\n" , \ - __FILE__ , ## arg) -#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n" , \ - __FILE__ , ## arg) - +#define err(format, arg...) printk(KERN_ERR KBUILD_MODNAME ": " \ + format "\n" , ## arg) +#define info(format, arg...) printk(KERN_INFO KBUILD_MODNAME ": " \ + format "\n" , ## arg) +#define warn(format, arg...) printk(KERN_WARNING KBUILD_MODNAME ": " \ + format "\n" , ## arg) #endif /* __KERNEL__ */ diff --git a/include/linux/usb/audio.h b/include/linux/usb/audio.h index 2dfeef16b22..8cb025fef63 100644 --- a/include/linux/usb/audio.h +++ b/include/linux/usb/audio.h @@ -50,4 +50,4 @@ struct usb_ac_header_descriptor_##n { \ __u8 baInterfaceNr[n]; \ } __attribute__ ((packed)) -#endif +#endif /* __LINUX_USB_AUDIO_H */ diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 94ee4ecf056..71e52f2f6a3 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -6,6 +6,9 @@ * firmware based USB peripherals. */ +#ifndef __LINUX_USB_CDC_H +#define __LINUX_USB_CDC_H + #define USB_CDC_SUBCLASS_ACM 0x02 #define USB_CDC_SUBCLASS_ETHERNET 0x06 #define USB_CDC_SUBCLASS_WHCM 0x08 @@ -221,3 +224,4 @@ struct usb_cdc_notification { __le16 wLength; } __attribute__ ((packed)); +#endif /* __LINUX_USB_CDC_H */ diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index 6169438ec5a..7e0d3084f76 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -66,8 +66,8 @@ #define USB_RECIP_ENDPOINT 0x02 #define USB_RECIP_OTHER 0x03 /* From Wireless USB 1.0 */ -#define USB_RECIP_PORT 0x04 -#define USB_RECIP_RPIPE 0x05 +#define USB_RECIP_PORT 0x04 +#define USB_RECIP_RPIPE 0x05 /* * Standard requests, for the bRequest field of a SETUP packet. @@ -102,10 +102,16 @@ #define USB_REQ_LOOPBACK_DATA_READ 0x16 #define USB_REQ_SET_INTERFACE_DS 0x17 +/* The Link Power Mangement (LPM) ECN defines USB_REQ_TEST_AND_SET command, + * used by hubs to put ports into a new L1 suspend state, except that it + * forgot to define its number ... + */ + /* * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and * are read as a bit array returned by USB_REQ_GET_STATUS. (So there - * are at most sixteen features of each type.) + * are at most sixteen features of each type.) Hubs may also support a + * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. */ #define USB_DEVICE_SELF_POWERED 0 /* (read only) */ #define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ @@ -180,6 +186,7 @@ struct usb_ctrlrequest { #define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 #define USB_DT_WIRE_ADAPTER 0x21 #define USB_DT_RPIPE 0x22 +#define USB_DT_CS_RADIO_CONTROL 0x23 /* Conventional codes for class-specific descriptors. The convention is * defined in the USB "Common Class" Spec (3.11). Individual class specs @@ -574,7 +581,9 @@ enum usb_device_state { /* NOTE: there are actually four different SUSPENDED * states, returning to POWERED, DEFAULT, ADDRESS, or * CONFIGURED respectively when SOF tokens flow again. + * At this level there's no difference between L1 and L2 + * suspend states. (L2 being original USB 1.1 suspend.) */ }; -#endif /* __LINUX_USB_CH9_H */ +#endif /* __LINUX_USB_CH9_H */ diff --git a/include/linux/usb/g_printer.h b/include/linux/usb/g_printer.h index 0c5ea1e3eb9..6178fde50f7 100644 --- a/include/linux/usb/g_printer.h +++ b/include/linux/usb/g_printer.h @@ -18,6 +18,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#ifndef __LINUX_USB_G_PRINTER_H +#define __LINUX_USB_G_PRINTER_H #define PRINTER_NOT_ERROR 0x08 #define PRINTER_SELECTED 0x10 @@ -29,3 +31,5 @@ */ #define GADGET_GET_PRINTER_STATUS _IOR('g', 0x21, unsigned char) #define GADGET_SET_PRINTER_STATUS _IOWR('g', 0x22, unsigned char) + +#endif /* __LINUX_USB_G_PRINTER_H */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index f3295296b43..d8128f7102c 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -846,4 +846,4 @@ extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *, extern void usb_ep_autoconfig_reset(struct usb_gadget *) __devinit; -#endif /* __LINUX_USB_GADGET_H */ +#endif /* __LINUX_USB_GADGET_H */ diff --git a/include/linux/usb/gadgetfs.h b/include/linux/usb/gadgetfs.h index c291ab1af74..ea45f265ec0 100644 --- a/include/linux/usb/gadgetfs.h +++ b/include/linux/usb/gadgetfs.h @@ -1,11 +1,3 @@ -#ifndef __LINUX_USB_GADGETFS_H -#define __LINUX_USB_GADGETFS_H - -#include <asm/types.h> -#include <asm/ioctl.h> - -#include <linux/usb/ch9.h> - /* * Filesystem based user-mode API to USB Gadget controller hardware * @@ -23,6 +15,14 @@ * then performing data transfers by reading or writing. */ +#ifndef __LINUX_USB_GADGETFS_H +#define __LINUX_USB_GADGETFS_H + +#include <asm/types.h> +#include <asm/ioctl.h> + +#include <linux/usb/ch9.h> + /* * Events are delivered on the ep0 file descriptor, when the user mode driver * reads from this file descriptor after writing the descriptors. Don't diff --git a/include/linux/usb/input.h b/include/linux/usb/input.h index 716e0cc1604..0e010b220e8 100644 --- a/include/linux/usb/input.h +++ b/include/linux/usb/input.h @@ -1,6 +1,3 @@ -#ifndef __USB_INPUT_H -#define __USB_INPUT_H - /* * Copyright (C) 2005 Dmitry Torokhov * @@ -9,6 +6,9 @@ * the Free Software Foundation. */ +#ifndef __LINUX_USB_INPUT_H +#define __LINUX_USB_INPUT_H + #include <linux/usb.h> #include <linux/input.h> #include <asm/byteorder.h> @@ -22,4 +22,4 @@ usb_to_input_id(const struct usb_device *dev, struct input_id *id) id->version = le16_to_cpu(dev->descriptor.bcdDevice); } -#endif +#endif /* __LINUX_USB_INPUT_H */ diff --git a/include/linux/usb/iowarrior.h b/include/linux/usb/iowarrior.h index de6f380e17a..4fd6513d564 100644 --- a/include/linux/usb/iowarrior.h +++ b/include/linux/usb/iowarrior.h @@ -1,5 +1,5 @@ -#ifndef _IOWARRIOR_H_ -#define _IOWARRIOR_H_ +#ifndef __LINUX_USB_IOWARRIOR_H +#define __LINUX_USB_IOWARRIOR_H #define CODEMERCS_MAGIC_NUMBER 0xC0 /* like COde Mercenaries */ @@ -39,4 +39,4 @@ struct iowarrior_info { */ #define IOW_GETINFO _IOR(CODEMERCS_MAGIC_NUMBER, 3, struct iowarrior_info) -#endif /* _IOWARRIOR_H_ */ +#endif /* __LINUX_USB_IOWARRIOR_H */ diff --git a/include/linux/usb/isp116x.h b/include/linux/usb/isp116x.h index 67d2826f34f..96ca114e88d 100644 --- a/include/linux/usb/isp116x.h +++ b/include/linux/usb/isp116x.h @@ -1,9 +1,11 @@ - /* * Board initialization code should put one of these into dev->platform_data * and place the isp116x onto platform_bus. */ +#ifndef __LINUX_USB_ISP116X_H +#define __LINUX_USB_ISP116X_H + struct isp116x_platform_data { /* Enable internal resistors on downstream ports */ unsigned sel15Kres:1; @@ -27,3 +29,5 @@ struct isp116x_platform_data { */ void (*delay) (struct device *dev, int delay); }; + +#endif /* __LINUX_USB_ISP116X_H */ diff --git a/include/linux/usb/midi.h b/include/linux/usb/midi.h index 80624c56292..1d104086566 100644 --- a/include/linux/usb/midi.h +++ b/include/linux/usb/midi.h @@ -109,4 +109,4 @@ struct usb_ms_endpoint_descriptor_##n { \ __u8 baAssocJackID[n]; \ } __attribute__ ((packed)) -#endif +#endif /* __LINUX_USB_MIDI_H */ diff --git a/include/linux/usb/net2280.h b/include/linux/usb/net2280.h index ec897cb844a..96ca549a778 100644 --- a/include/linux/usb/net2280.h +++ b/include/linux/usb/net2280.h @@ -1,11 +1,7 @@ /* * NetChip 2280 high/full speed USB device controller. * Unlike many such controllers, this one talks PCI. - */ -#ifndef __LINUX_USB_NET2280_H -#define __LINUX_USB_NET2280_H - -/* + * * Copyright (C) 2002 NetChip Technology, Inc. (http://www.netchip.com) * Copyright (C) 2003 David Brownell * @@ -24,6 +20,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#ifndef __LINUX_USB_NET2280_H +#define __LINUX_USB_NET2280_H + /*-------------------------------------------------------------------------*/ /* NET2280 MEMORY MAPPED REGISTERS diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index e007074ebe4..1db25d152ad 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -1,11 +1,13 @@ /* USB OTG (On The Go) defines */ - /* + * * These APIs may be used between USB controllers. USB device drivers * (for either host or peripheral roles) don't use these calls; they * continue to use just usb_device and usb_gadget. */ +#ifndef __LINUX_USB_OTG_H +#define __LINUX_USB_OTG_H /* OTG defines lots of enumeration states before device reset */ enum usb_otg_state { @@ -129,3 +131,5 @@ otg_start_srp(struct otg_transceiver *otg) /* for OTG controller drivers (and maybe other stuff) */ extern int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num); + +#endif /* __LINUX_USB_OTG_H */ diff --git a/include/linux/usb/quirks.h b/include/linux/usb/quirks.h index 1f999ec8d08..7f6c603db65 100644 --- a/include/linux/usb/quirks.h +++ b/include/linux/usb/quirks.h @@ -4,6 +4,9 @@ * belong here. */ +#ifndef __LINUX_USB_QUIRKS_H +#define __LINUX_USB_QUIRKS_H + /* string descriptors must not be fetched using a 255-byte read */ #define USB_QUIRK_STRING_FETCH_255 0x00000001 @@ -12,3 +15,5 @@ /* device can't handle Set-Interface requests */ #define USB_QUIRK_NO_SET_INTF 0x00000004 + +#endif /* __LINUX_USB_QUIRKS_H */ diff --git a/include/linux/usb/rndis_host.h b/include/linux/usb/rndis_host.h index edc1d4a0e27..29d6458ecb8 100644 --- a/include/linux/usb/rndis_host.h +++ b/include/linux/usb/rndis_host.h @@ -17,10 +17,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - -#ifndef __RNDIS_HOST_H -#define __RNDIS_HOST_H - +#ifndef __LINUX_USB_RNDIS_HOST_H +#define __LINUX_USB_RNDIS_HOST_H /* * CONTROL uses CDC "encapsulated commands" with funky notifications. @@ -270,5 +268,4 @@ extern int rndis_rx_fixup(struct usbnet *dev, struct sk_buff *skb); extern struct sk_buff * rndis_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags); -#endif /* __RNDIS_HOST_H */ - +#endif /* __LINUX_USB_RNDIS_HOST_H */ diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 21b4a1c6f58..8f891cbaf9a 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -10,7 +10,6 @@ * */ - #ifndef __LINUX_USB_SERIAL_H #define __LINUX_USB_SERIAL_H @@ -146,8 +145,6 @@ struct usb_serial { }; #define to_usb_serial(d) container_of(d, struct usb_serial, kref) -#define NUM_DONT_CARE 99 - /* get and set the serial private data pointer helper functions */ static inline void *usb_get_serial_data(struct usb_serial *serial) { @@ -165,18 +162,6 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) * used in the syslog messages when a device is inserted or removed. * @id_table: pointer to a list of usb_device_id structures that define all * of the devices this structure can support. - * @num_interrupt_in: If a device doesn't have this many interrupt-in - * endpoints, it won't be sent to the driver's attach() method. - * (But it might still be sent to the probe() method.) - * @num_interrupt_out: If a device doesn't have this many interrupt-out - * endpoints, it won't be sent to the driver's attach() method. - * (But it might still be sent to the probe() method.) - * @num_bulk_in: If a device doesn't have this many bulk-in - * endpoints, it won't be sent to the driver's attach() method. - * (But it might still be sent to the probe() method.) - * @num_bulk_out: If a device doesn't have this many bulk-out - * endpoints, it won't be sent to the driver's attach() method. - * (But it might still be sent to the probe() method.) * @num_ports: the number of different ports this device will have. * @calc_num_ports: pointer to a function to determine how many ports this * device has dynamically. It will be called after the probe() @@ -212,10 +197,6 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) struct usb_serial_driver { const char *description; const struct usb_device_id *id_table; - char num_interrupt_in; - char num_interrupt_out; - char num_bulk_in; - char num_bulk_out; char num_ports; struct list_head driver_list; @@ -340,5 +321,5 @@ static inline void usb_serial_debug_data(int debug, -#endif /* ifdef __LINUX_USB_SERIAL_H */ +#endif /* __LINUX_USB_SERIAL_H */ diff --git a/include/linux/usb/sl811.h b/include/linux/usb/sl811.h index 877373da410..3afe4d16fce 100644 --- a/include/linux/usb/sl811.h +++ b/include/linux/usb/sl811.h @@ -1,9 +1,11 @@ - /* * board initialization should put one of these into dev->platform_data * and place the sl811hs onto platform_bus named "sl811-hcd". */ +#ifndef __LINUX_USB_SL811_H +#define __LINUX_USB_SL811_H + struct sl811_platform_data { unsigned can_wakeup:1; @@ -24,3 +26,4 @@ struct sl811_platform_data { /* void (*clock_enable)(struct device *dev, int is_on); */ }; +#endif /* __LINUX_USB_SL811_H */ diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index e0501da3dd1..ba09fe88add 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -19,10 +19,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ - -#ifndef __USBNET_H -#define __USBNET_H - +#ifndef __LINUX_USB_USBNET_H +#define __LINUX_USB_USBNET_H /* interface from usbnet core to each USB networking link we handle */ struct usbnet { @@ -211,4 +209,4 @@ extern int usbnet_nway_reset(struct net_device *net); printk(KERN_INFO "%s: " fmt "\n" , (usbnet)->net->name , ## arg); \ -#endif /* __USBNET_H */ +#endif /* __LINUX_USB_USBNET_H */ diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 0a40dfa44c9..d9a3bbe38e6 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -85,6 +85,7 @@ enum { US_DO_ALL_FLAGS }; #define US_SC_LOCKABLE 0x07 /* Password-protected */ #define US_SC_ISD200 0xf0 /* ISD200 ATA */ +#define US_SC_CYP_ATACB 0xf1 /* Cypress ATACB */ #define US_SC_DEVICE 0xff /* Use device's value */ /* Protocols */ diff --git a/include/linux/usbdevice_fs.h b/include/linux/usbdevice_fs.h index 17cb108b7db..3118ede2c67 100644 --- a/include/linux/usbdevice_fs.h +++ b/include/linux/usbdevice_fs.h @@ -77,8 +77,11 @@ struct usbdevfs_connectinfo { unsigned char slow; }; -#define USBDEVFS_URB_SHORT_NOT_OK 1 -#define USBDEVFS_URB_ISO_ASAP 2 +#define USBDEVFS_URB_SHORT_NOT_OK 0x01 +#define USBDEVFS_URB_ISO_ASAP 0x02 +#define USBDEVFS_URB_NO_FSBR 0x20 +#define USBDEVFS_URB_ZERO_PACKET 0x40 +#define USBDEVFS_URB_NO_INTERRUPT 0x80 #define USBDEVFS_URB_TYPE_ISO 0 #define USBDEVFS_URB_TYPE_INTERRUPT 1 |