aboutsummaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/acpi.h3
-rw-r--r--include/linux/device.h9
-rw-r--r--include/linux/pci.h57
-rw-r--r--include/linux/pci_hotplug.h14
-rw-r--r--include/linux/pci_regs.h1
-rw-r--r--include/linux/platform_device.h1
-rw-r--r--include/linux/pm.h314
-rw-r--r--include/linux/pm_wakeup.h28
-rw-r--r--include/linux/suspend.h14
9 files changed, 373 insertions, 68 deletions
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 0601075d09a..a1717763937 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -235,6 +235,9 @@ int acpi_check_region(resource_size_t start, resource_size_t n,
int acpi_check_mem_region(resource_size_t start, resource_size_t n,
const char *name);
+#ifdef CONFIG_PM_SLEEP
+void __init acpi_old_suspend_ordering(void);
+#endif /* CONFIG_PM_SLEEP */
#else /* CONFIG_ACPI */
static inline int early_acpi_boot_init(void)
diff --git a/include/linux/device.h b/include/linux/device.h
index 6a2d04c011b..f71a78d123a 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -68,6 +68,8 @@ struct bus_type {
int (*resume_early)(struct device *dev);
int (*resume)(struct device *dev);
+ struct pm_ext_ops *pm;
+
struct bus_type_private *p;
};
@@ -131,6 +133,8 @@ struct device_driver {
int (*resume) (struct device *dev);
struct attribute_group **groups;
+ struct pm_ops *pm;
+
struct driver_private *p;
};
@@ -197,6 +201,8 @@ struct class {
int (*suspend)(struct device *dev, pm_message_t state);
int (*resume)(struct device *dev);
+
+ struct pm_ops *pm;
};
extern int __must_check class_register(struct class *class);
@@ -248,8 +254,11 @@ struct device_type {
struct attribute_group **groups;
int (*uevent)(struct device *dev, struct kobj_uevent_env *env);
void (*release)(struct device *dev);
+
int (*suspend)(struct device *dev, pm_message_t state);
int (*resume)(struct device *dev);
+
+ struct pm_ops *pm;
};
/* interface for exporting device attributes */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index d18b1dd49fa..a6a088e1a80 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -17,8 +17,7 @@
#ifndef LINUX_PCI_H
#define LINUX_PCI_H
-/* Include the pci register defines */
-#include <linux/pci_regs.h>
+#include <linux/pci_regs.h> /* The pci register defines */
/*
* The PCI interface treats multi-function devices as independent
@@ -49,12 +48,22 @@
#include <linux/list.h>
#include <linux/compiler.h>
#include <linux/errno.h>
+#include <linux/kobject.h>
#include <asm/atomic.h>
#include <linux/device.h>
/* Include the ID list */
#include <linux/pci_ids.h>
+/* pci_slot represents a physical slot */
+struct pci_slot {
+ struct pci_bus *bus; /* The bus this slot is on */
+ struct list_head list; /* node in list of slots on this bus */
+ struct hotplug_slot *hotplug; /* Hotplug info (migrate over time) */
+ unsigned char number; /* PCI_SLOT(pci_dev->devfn) */
+ struct kobject kobj;
+};
+
/* File state for mmap()s on /proc/bus/pci/X/Y */
enum pci_mmap_state {
pci_mmap_io,
@@ -142,6 +151,7 @@ struct pci_dev {
void *sysdata; /* hook for sys-specific extension */
struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */
+ struct pci_slot *slot; /* Physical slot this device is in */
unsigned int devfn; /* encoded device & function index */
unsigned short vendor;
@@ -167,6 +177,13 @@ struct pci_dev {
pci_power_t current_state; /* Current operating state. In ACPI-speak,
this is D0-D3, D0 being fully functional,
and D3 being off. */
+ int pm_cap; /* PM capability offset in the
+ configuration space */
+ unsigned int pme_support:5; /* Bitmask of states from which PME#
+ can be generated */
+ unsigned int d1_support:1; /* Low power state D1 is supported */
+ unsigned int d2_support:1; /* Low power state D2 is supported */
+ unsigned int no_d1d2:1; /* Only allow D0 and D3 */
#ifdef CONFIG_PCIEASPM
struct pcie_link_state *link_state; /* ASPM link state. */
@@ -191,7 +208,6 @@ struct pci_dev {
unsigned int is_added:1;
unsigned int is_busmaster:1; /* device is busmaster */
unsigned int no_msi:1; /* device may not use msi */
- unsigned int no_d1d2:1; /* only allow d0 or d3 */
unsigned int block_ucfg_access:1; /* userspace config space access is blocked */
unsigned int broken_parity_status:1; /* Device generates false positive parity */
unsigned int msi_enabled:1;
@@ -267,6 +283,7 @@ struct pci_bus {
struct list_head children; /* list of child buses */
struct list_head devices; /* list of devices on this bus */
struct pci_dev *self; /* bridge device as seen by parent */
+ struct list_head slots; /* list of slots on this bus */
struct resource *resource[PCI_BUS_NUM_RESOURCES];
/* address space routed to this bus */
@@ -328,7 +345,7 @@ struct pci_bus_region {
struct pci_dynids {
spinlock_t lock; /* protects list, index */
struct list_head list; /* for IDs added at runtime */
- unsigned int use_driver_data:1; /* pci_driver->driver_data is used */
+ unsigned int use_driver_data:1; /* pci_device_id->driver_data is used */
};
/* ---------------------------------------------------------------- */
@@ -390,7 +407,7 @@ struct pci_driver {
int (*resume_early) (struct pci_dev *dev);
int (*resume) (struct pci_dev *dev); /* Device woken up */
void (*shutdown) (struct pci_dev *dev);
-
+ struct pm_ext_ops *pm;
struct pci_error_handlers *err_handler;
struct device_driver driver;
struct pci_dynids dynids;
@@ -489,6 +506,10 @@ struct pci_bus *pci_create_bus(struct device *parent, int bus,
struct pci_ops *ops, void *sysdata);
struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev,
int busnr);
+struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr,
+ const char *name);
+void pci_destroy_slot(struct pci_slot *slot);
+void pci_update_slot_number(struct pci_slot *slot, int slot_nr);
int pci_scan_slot(struct pci_bus *bus, int devfn);
struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn);
void pci_device_add(struct pci_dev *dev, struct pci_bus *bus);
@@ -618,6 +639,8 @@ int pci_restore_state(struct pci_dev *dev);
int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable);
+int pci_prepare_to_sleep(struct pci_dev *dev);
+int pci_back_from_sleep(struct pci_dev *dev);
/* Functions for PCI Hotplug drivers to use */
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
@@ -839,6 +862,11 @@ static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
return -EIO;
}
+static inline int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
+{
+ return -EIO;
+}
+
static inline int pci_set_dma_max_seg_size(struct pci_dev *dev,
unsigned int size)
{
@@ -977,9 +1005,9 @@ static inline void pci_set_drvdata(struct pci_dev *pdev, void *data)
/* If you want to know what to call your pci_dev, ask this function.
* Again, it's a wrapper around the generic device.
*/
-static inline char *pci_name(struct pci_dev *pdev)
+static inline const char *pci_name(struct pci_dev *pdev)
{
- return pdev->dev.bus_id;
+ return dev_name(&pdev->dev);
}
@@ -1014,7 +1042,9 @@ enum pci_fixup_pass {
pci_fixup_header, /* After reading configuration header */
pci_fixup_final, /* Final phase of device fixups */
pci_fixup_enable, /* pci_enable_device() time */
- pci_fixup_resume, /* pci_enable_device() time */
+ pci_fixup_resume, /* pci_device_resume() */
+ pci_fixup_suspend, /* pci_device_suspend */
+ pci_fixup_resume_early, /* pci_device_resume_early() */
};
/* Anonymous variables would be nice... */
@@ -1036,6 +1066,12 @@ enum pci_fixup_pass {
#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
resume##vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \
+ resume_early##vendor##device##hook, vendor, device, hook)
+#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
+ suspend##vendor##device##hook, vendor, device, hook)
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
@@ -1060,7 +1096,10 @@ extern int pci_pci_problems;
extern unsigned long pci_cardbus_io_size;
extern unsigned long pci_cardbus_mem_size;
-extern int pcibios_add_platform_entries(struct pci_dev *dev);
+int pcibios_add_platform_entries(struct pci_dev *dev);
+void pcibios_disable_device(struct pci_dev *dev);
+int pcibios_set_pcie_reset_state(struct pci_dev *dev,
+ enum pcie_reset_state state);
#ifdef CONFIG_PCI_MMCONFIG
extern void __init pci_mmcfg_early_init(void);
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 8f67e8f2a3c..a08cd06b541 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -95,9 +95,6 @@ struct hotplug_slot_attribute {
* @get_adapter_status: Called to get see if an adapter is present in the slot or not.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
- * @get_address: Called to get pci address of a slot.
- * If this field is NULL, the value passed in the struct hotplug_slot_info
- * will be used when this value is requested by a user.
* @get_max_bus_speed: Called to get the max bus speed for a slot.
* If this field is NULL, the value passed in the struct hotplug_slot_info
* will be used when this value is requested by a user.
@@ -120,7 +117,6 @@ struct hotplug_slot_ops {
int (*get_attention_status) (struct hotplug_slot *slot, u8 *value);
int (*get_latch_status) (struct hotplug_slot *slot, u8 *value);
int (*get_adapter_status) (struct hotplug_slot *slot, u8 *value);
- int (*get_address) (struct hotplug_slot *slot, u32 *value);
int (*get_max_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
int (*get_cur_bus_speed) (struct hotplug_slot *slot, enum pci_bus_speed *value);
};
@@ -140,7 +136,6 @@ struct hotplug_slot_info {
u8 attention_status;
u8 latch_status;
u8 adapter_status;
- u32 address;
enum pci_bus_speed max_bus_speed;
enum pci_bus_speed cur_bus_speed;
};
@@ -166,15 +161,14 @@ struct hotplug_slot {
/* Variables below this are for use only by the hotplug pci core. */
struct list_head slot_list;
- struct kobject kobj;
+ struct pci_slot *pci_slot;
};
#define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj)
-extern int pci_hp_register (struct hotplug_slot *slot);
-extern int pci_hp_deregister (struct hotplug_slot *slot);
+extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr);
+extern int pci_hp_deregister(struct hotplug_slot *slot);
extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot,
struct hotplug_slot_info *info);
-extern struct kset *pci_hotplug_slots_kset;
/* PCI Setting Record (Type 0) */
struct hpp_type0 {
@@ -227,9 +221,9 @@ struct hotplug_params {
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/actypes.h>
-extern acpi_status acpi_run_oshp(acpi_handle handle);
extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus,
struct hotplug_params *hpp);
+int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags);
int acpi_root_bridge(acpi_handle handle);
#endif
#endif
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index c0c1223c919..19958b92990 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -231,6 +231,7 @@
#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */
#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */
#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */
+#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */
#define PCI_PM_CTRL 4 /* PM control and status register */
#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */
#define PCI_PM_CTRL_NO_SOFT_RESET 0x0004 /* No reset for D3hot->D0 */
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 3261681c82a..95ac21ab3a0 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -53,6 +53,7 @@ struct platform_driver {
int (*suspend_late)(struct platform_device *, pm_message_t state);
int (*resume_early)(struct platform_device *);
int (*resume)(struct platform_device *);
+ struct pm_ext_ops *pm;
struct device_driver driver;
};
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 39a7ee859b6..4ad9de94449 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -112,7 +112,9 @@ typedef struct pm_message {
int event;
} pm_message_t;
-/*
+/**
+ * struct pm_ops - device PM callbacks
+ *
* Several driver power state transitions are externally visible, affecting
* the state of pending I/O queues and (for drivers that touch hardware)
* interrupts, wakeups, DMA, and other hardware state. There may also be
@@ -120,6 +122,284 @@ typedef struct pm_message {
* to the rest of the driver stack (such as a driver that's ON gating off
* clocks which are not in active use).
*
+ * The externally visible transitions are handled with the help of the following
+ * callbacks included in this structure:
+ *
+ * @prepare: Prepare the device for the upcoming transition, but do NOT change
+ * its hardware state. Prevent new children of the device from being
+ * registered after @prepare() returns (the driver's subsystem and
+ * generally the rest of the kernel is supposed to prevent new calls to the
+ * probe method from being made too once @prepare() has succeeded). If
+ * @prepare() detects a situation it cannot handle (e.g. registration of a
+ * child already in progress), it may return -EAGAIN, so that the PM core
+ * can execute it once again (e.g. after the new child has been registered)
+ * to recover from the race condition. This method is executed for all
+ * kinds of suspend transitions and is followed by one of the suspend
+ * callbacks: @suspend(), @freeze(), or @poweroff().
+ * The PM core executes @prepare() for all devices before starting to
+ * execute suspend callbacks for any of them, so drivers may assume all of
+ * the other devices to be present and functional while @prepare() is being
+ * executed. In particular, it is safe to make GFP_KERNEL memory
+ * allocations from within @prepare(). However, drivers may NOT assume
+ * anything about the availability of the user space at that time and it
+ * is not correct to request firmware from within @prepare() (it's too
+ * late to do that). [To work around this limitation, drivers may
+ * register suspend and hibernation notifiers that are executed before the
+ * freezing of tasks.]
+ *
+ * @complete: Undo the changes made by @prepare(). This method is executed for
+ * all kinds of resume transitions, following one of the resume callbacks:
+ * @resume(), @thaw(), @restore(). Also called if the state transition
+ * fails before the driver's suspend callback (@suspend(), @freeze(),
+ * @poweroff()) can be executed (e.g. if the suspend callback fails for one
+ * of the other devices that the PM core has unsuccessfully attempted to
+ * suspend earlier).
+ * The PM core executes @complete() after it has executed the appropriate
+ * resume callback for all devices.
+ *
+ * @suspend: Executed before putting the system into a sleep state in which the
+ * contents of main memory are preserved. Quiesce the device, put it into
+ * a low power state appropriate for the upcoming system state (such as
+ * PCI_D3hot), and enable wakeup events as appropriate.
+ *
+ * @resume: Executed after waking the system up from a sleep state in which the
+ * contents of main memory were preserved. Put the device into the
+ * appropriate state, according to the information saved in memory by the
+ * preceding @suspend(). The driver starts working again, responding to
+ * hardware events and software requests. The hardware may have gone
+ * through a power-off reset, or it may have maintained state from the
+ * previous suspend() which the driver may rely on while resuming. On most
+ * platforms, there are no restrictions on availability of resources like
+ * clocks during @resume().
+ *
+ * @freeze: Hibernation-specific, executed before creating a hibernation image.
+ * Quiesce operations so that a consistent image can be created, but do NOT
+ * otherwise put the device into a low power device state and do NOT emit
+ * system wakeup events. Save in main memory the device settings to be
+ * used by @restore() during the subsequent resume from hibernation or by
+ * the subsequent @thaw(), if the creation of the image or the restoration
+ * of main memory contents from it fails.
+ *
+ * @thaw: Hibernation-specific, executed after creating a hibernation image OR
+ * if the creation of the image fails. Also executed after a failing
+ * attempt to restore the contents of main memory from such an image.
+ * Undo the changes made by the preceding @freeze(), so the device can be
+ * operated in the same way as immediately before the call to @freeze().
+ *
+ * @poweroff: Hibernation-specific, executed after saving a hibernation image.
+ * Quiesce the device, put it into a low power state appropriate for the
+ * upcoming system state (such as PCI_D3hot), and enable wakeup events as
+ * appropriate.
+ *
+ * @restore: Hibernation-specific, executed after restoring the contents of main
+ * memory from a hibernation image. Driver starts working again,
+ * responding to hardware events and software requests. Drivers may NOT
+ * make ANY assumptions about the hardware state right prior to @restore().
+ * On most platforms, there are no restrictions on availability of
+ * resources like clocks during @restore().
+ *
+ * All of the above callbacks, except for @complete(), return error codes.
+ * However, the error codes returned by the resume operations, @resume(),
+ * @thaw(), and @restore(), do not cause the PM core to abort the resume
+ * transition during which they are returned. The error codes returned in
+ * that cases are only printed by the PM core to the system logs for debugging
+ * purposes. Still, it is recommended that drivers only return error codes
+ * from their resume methods in case of an unrecoverable failure (i.e. when the
+ * device being handled refuses to resume and becomes unusable) to allow us to
+ * modify the PM core in the future, so that it can avoid attempting to handle
+ * devices that failed to resume and their children.
+ *
+ * It is allowed to unregister devices while the above callbacks are being
+ * executed. However, it is not allowed to unregister a device from within any
+ * of its own callbacks.
+ */
+
+struct pm_ops {
+ int (*prepare)(struct device *dev);
+ void (*complete)(struct device *dev);
+ int (*suspend)(struct device *dev);
+ int (*resume)(struct device *dev);
+ int (*freeze)(struct device *dev);
+ int (*thaw)(struct device *dev);
+ int (*poweroff)(struct device *dev);
+ int (*restore)(struct device *dev);
+};
+
+/**
+ * struct pm_ext_ops - extended device PM callbacks
+ *
+ * Some devices require certain operations related to suspend and hibernation
+ * to be carried out with interrupts disabled. Thus, 'struct pm_ext_ops' below
+ * is defined, adding callbacks to be executed with interrupts disabled to
+ * 'struct pm_ops'.
+ *
+ * The following callbacks included in 'struct pm_ext_ops' are executed with
+ * the nonboot CPUs switched off and with interrupts disabled on the only
+ * functional CPU. They also are executed with the PM core list of devices
+ * locked, so they must NOT unregister any devices.
+ *
+ * @suspend_noirq: Complete the operations of ->suspend() by carrying out any
+ * actions required for suspending the device that need interrupts to be
+ * disabled
+ *
+ * @resume_noirq: Prepare for the execution of ->resume() by carrying out any
+ * actions required for resuming the device that need interrupts to be
+ * disabled
+ *
+ * @freeze_noirq: Complete the operations of ->freeze() by carrying out any
+ * actions required for freezing the device that need interrupts to be
+ * disabled
+ *
+ * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any
+ * actions required for thawing the device that need interrupts to be
+ * disabled
+ *
+ * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any
+ * actions required for handling the device that need interrupts to be
+ * disabled
+ *
+ * @restore_noirq: Prepare for the execution of ->restore() by carrying out any
+ * actions required for restoring the operations of the device that need
+ * interrupts to be disabled
+ *
+ * All of the above callbacks return error codes, but the error codes returned
+ * by the resume operations, @resume_noirq(), @thaw_noirq(), and
+ * @restore_noirq(), do not cause the PM core to abort the resume transition
+ * during which they are returned. The error codes returned in that cases are
+ * only printed by the PM core to the system logs for debugging purposes.
+ * Still, as stated above, it is recommended that drivers only return error
+ * codes from their resume methods if the device being handled fails to resume
+ * and is not usable any more.
+ */
+
+struct pm_ext_ops {
+ struct pm_ops base;
+ int (*suspend_noirq)(struct device *dev);
+ int (*resume_noirq)(struct device *dev);
+ int (*freeze_noirq)(struct device *dev);
+ int (*thaw_noirq)(struct device *dev);
+ int (*poweroff_noirq)(struct device *dev);
+ int (*restore_noirq)(struct device *dev);
+};
+
+/**
+ * PM_EVENT_ messages
+ *
+ * The following PM_EVENT_ messages are defined for the internal use of the PM
+ * core, in order to provide a mechanism allowing the high level suspend and
+ * hibernation code to convey the necessary information to the device PM core
+ * code:
+ *
+ * ON No transition.
+ *
+ * FREEZE System is going to hibernate, call ->prepare() and ->freeze()
+ * for all devices.
+ *
+ * SUSPEND System is going to suspend, call ->prepare() and ->suspend()
+ * for all devices.
+ *
+ * HIBERNATE Hibernation image has been saved, call ->prepare() and
+ * ->poweroff() for all devices.
+ *
+ * QUIESCE Contents of main memory are going to be restored from a (loaded)
+ * hibernation image, call ->prepare() and ->freeze() for all
+ * devices.
+ *
+ * RESUME System is resuming, call ->resume() and ->complete() for all
+ * devices.
+ *
+ * THAW Hibernation image has been created, call ->thaw() and
+ * ->complete() for all devices.
+ *
+ * RESTORE Contents of main memory have been restored from a hibernation
+ * image, call ->restore() and ->complete() for all devices.
+ *
+ * RECOVER Creation of a hibernation image or restoration of the main
+ * memory contents from a hibernation image has failed, call
+ * ->thaw() and ->complete() for all devices.
+ */
+
+#define PM_EVENT_ON 0x0000
+#define PM_EVENT_FREEZE 0x0001
+#define PM_EVENT_SUSPEND 0x0002
+#define PM_EVENT_HIBERNATE 0x0004
+#define PM_EVENT_QUIESCE 0x0008
+#define PM_EVENT_RESUME 0x0010
+#define PM_EVENT_THAW 0x0020
+#define PM_EVENT_RESTORE 0x0040
+#define PM_EVENT_RECOVER 0x0080
+
+#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
+
+#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
+#define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, })
+#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
+#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
+#define PMSG_RESUME ((struct pm_message){ .event = PM_EVENT_RESUME, })
+#define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, })
+#define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, })
+#define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, })
+#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
+
+/**
+ * Device power management states
+ *
+ * These state labels are used internally by the PM core to indicate the current
+ * status of a device with respect to the PM core operations.
+ *
+ * DPM_ON Device is regarded as operational. Set this way
+ * initially and when ->complete() is about to be called.
+ * Also set when ->prepare() fails.
+ *
+ * DPM_PREPARING Device is going to be prepared for a PM transition. Set
+ * when ->prepare() is about to be called.
+ *
+ * DPM_RESUMING Device is going to be resumed. Set when ->resume(),
+ * ->thaw(), or ->restore() is about to be called.
+ *
+ * DPM_SUSPENDING Device has been prepared for a power transition. Set
+ * when ->prepare() has just succeeded.
+ *
+ * DPM_OFF Device is regarded as inactive. Set immediately after
+ * ->suspend(), ->freeze(), or ->poweroff() has succeeded.
+ * Also set when ->resume()_noirq, ->thaw_noirq(), or
+ * ->restore_noirq() is about to be called.
+ *
+ * DPM_OFF_IRQ Device is in a "deep sleep". Set immediately after
+ * ->suspend_noirq(), ->freeze_noirq(), or
+ * ->poweroff_noirq() has just succeeded.
+ */
+
+enum dpm_state {
+ DPM_INVALID,
+ DPM_ON,
+ DPM_PREPARING,
+ DPM_RESUMING,
+ DPM_SUSPENDING,
+ DPM_OFF,
+ DPM_OFF_IRQ,
+};
+
+struct dev_pm_info {
+ pm_message_t power_state;
+ unsigned can_wakeup:1;
+ unsigned should_wakeup:1;
+ enum dpm_state status; /* Owned by the PM core */
+#ifdef CONFIG_PM_SLEEP
+ struct list_head entry;
+#endif
+};
+
+/*
+ * The PM_EVENT_ messages are also used by drivers implementing the legacy
+ * suspend framework, based on the ->suspend() and ->resume() callbacks common
+ * for suspend and hibernation transitions, according to the rules below.
+ */
+
+/* Necessary, because several drivers use PM_EVENT_PRETHAW */
+#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE
+
+/*
* One transition is triggered by resume(), after a suspend() call; the
* message is implicit:
*
@@ -164,35 +444,13 @@ typedef struct pm_message {
* or from system low-power states such as standby or suspend-to-RAM.
*/
-#define PM_EVENT_ON 0
-#define PM_EVENT_FREEZE 1
-#define PM_EVENT_SUSPEND 2
-#define PM_EVENT_HIBERNATE 4
-#define PM_EVENT_PRETHAW 8
-
-#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE)
-
-#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, })
-#define PMSG_PRETHAW ((struct pm_message){ .event = PM_EVENT_PRETHAW, })
-#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, })
-#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, })
-#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, })
-
-struct dev_pm_info {
- pm_message_t power_state;
- unsigned can_wakeup:1;
- unsigned should_wakeup:1;
- bool sleeping:1; /* Owned by the PM core */
-#ifdef CONFIG_PM_SLEEP
- struct list_head entry;
-#endif
-};
+#ifdef CONFIG_PM_SLEEP
+extern void device_pm_lock(void);
+extern void device_power_up(pm_message_t state);
+extern void device_resume(pm_message_t state);
+extern void device_pm_unlock(void);
extern int device_power_down(pm_message_t state);
-extern void device_power_up(void);
-extern void device_resume(void);
-
-#ifdef CONFIG_PM_SLEEP
extern int device_suspend(pm_message_t state);
extern int device_prepare_suspend(pm_message_t state);
diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
index f0d0b2cb8d2..0aae7776185 100644
--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h
@@ -35,6 +35,11 @@ static inline void device_init_wakeup(struct device *dev, int val)
dev->power.can_wakeup = dev->power.should_wakeup = !!val;
}
+static inline void device_set_wakeup_capable(struct device *dev, int val)
+{
+ dev->power.can_wakeup = !!val;
+}
+
static inline int device_can_wakeup(struct device *dev)
{
return dev->power.can_wakeup;
@@ -47,21 +52,7 @@ static inline void device_set_wakeup_enable(struct device *dev, int val)
static inline int device_may_wakeup(struct device *dev)
{
- return dev->power.can_wakeup & dev->power.should_wakeup;
-}
-
-/*
- * Platform hook to activate device wakeup capability, if that's not already
- * handled by enable_irq_wake() etc.
- * Returns zero on success, else negative errno
- */
-extern int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
- if (platform_enable_wakeup)
- return (*platform_enable_wakeup)(dev, is_on);
- return 0;
+ return dev->power.can_wakeup && dev->power.should_wakeup;
}
#else /* !CONFIG_PM */
@@ -72,6 +63,8 @@ static inline void device_init_wakeup(struct device *dev, int val)
dev->power.can_wakeup = !!val;
}
+static inline void device_set_wakeup_capable(struct device *dev, int val) { }
+
static inline int device_can_wakeup(struct device *dev)
{
return dev->power.can_wakeup;
@@ -80,11 +73,6 @@ static inline int device_can_wakeup(struct device *dev)
#define device_set_wakeup_enable(dev, val) do {} while (0)
#define device_may_wakeup(dev) 0
-static inline int call_platform_enable_wakeup(struct device *dev, int is_on)
-{
- return 0;
-}
-
#endif /* !CONFIG_PM */
#endif /* _LINUX_PM_WAKEUP_H */
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index a6977423baf..e8e69159af7 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -86,6 +86,11 @@ typedef int __bitwise suspend_state_t;
* that implement @begin(), but platforms implementing @begin() should
* also provide a @end() which cleans up transitions aborted before
* @enter().
+ *
+ * @recover: Recover the platform from a suspend failure.
+ * Called by the PM core if the suspending of devices fails.
+ * This callback is optional and should only be implemented by platforms
+ * which require special recovery actions in that situation.
*/
struct platform_suspend_ops {
int (*valid)(suspend_state_t state);
@@ -94,6 +99,7 @@ struct platform_suspend_ops {
int (*enter)(suspend_state_t state);
void (*finish)(void);
void (*end)(void);
+ void (*recover)(void);
};
#ifdef CONFIG_SUSPEND
@@ -149,7 +155,7 @@ extern void mark_free_pages(struct zone *zone);
* The methods in this structure allow a platform to carry out special
* operations required by it during a hibernation transition.
*
- * All the methods below must be implemented.
+ * All the methods below, except for @recover(), must be implemented.
*
* @begin: Tell the platform driver that we're starting hibernation.
* Called right after shrinking memory and before freezing devices.
@@ -189,6 +195,11 @@ extern void mark_free_pages(struct zone *zone);
* @restore_cleanup: Clean up after a failing image restoration.
* Called right after the nonboot CPUs have been enabled and before
* thawing devices (runs with IRQs on).
+ *
+ * @recover: Recover the platform from a failure to suspend devices.
+ * Called by the PM core if the suspending of devices during hibernation
+ * fails. This callback is optional and should only be implemented by
+ * platforms which require special recovery actions in that situation.
*/
struct platform_hibernation_ops {
int (*begin)(void);
@@ -200,6 +211,7 @@ struct platform_hibernation_ops {
void (*leave)(void);
int (*pre_restore)(void);
void (*restore_cleanup)(void);
+ void (*recover)(void);
};
#ifdef CONFIG_HIBERNATION