aboutsummaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/elevator.h2
-rw-r--r--include/linux/firmware.h1
-rw-r--r--include/linux/fs.h7
-rw-r--r--include/linux/fsl_devices.h11
-rw-r--r--include/linux/i2o.h5
-rw-r--r--include/linux/input.h13
-rw-r--r--include/linux/kernel.h1
-rw-r--r--include/linux/m48t86.h4
-rw-r--r--include/linux/mempolicy.h1
-rw-r--r--include/linux/mmc/mmc.h1
-rw-r--r--include/linux/mmzone.h2
-rw-r--r--include/linux/pci-acpi.h2
-rw-r--r--include/linux/pci_ids.h1
-rw-r--r--include/linux/rcupdate.h1
-rw-r--r--include/linux/slab.h1
-rw-r--r--include/linux/spi/spi.h45
-rw-r--r--include/linux/spi/spi_bitbang.h8
-rw-r--r--include/linux/swap.h2
-rw-r--r--include/linux/syscalls.h6
-rw-r--r--include/linux/videodev2.h5
-rw-r--r--include/linux/vt_kern.h5
21 files changed, 84 insertions, 40 deletions
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index ad133fcfb23..1713ace808b 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -21,7 +21,7 @@ typedef void (elevator_put_req_fn) (request_queue_t *, struct request *);
typedef void (elevator_activate_req_fn) (request_queue_t *, struct request *);
typedef void (elevator_deactivate_req_fn) (request_queue_t *, struct request *);
-typedef int (elevator_init_fn) (request_queue_t *, elevator_t *);
+typedef void *(elevator_init_fn) (request_queue_t *, elevator_t *);
typedef void (elevator_exit_fn) (elevator_t *);
struct elevator_ops
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 2d716080be4..33d8f2087b6 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -19,5 +19,4 @@ int request_firmware_nowait(
void (*cont)(const struct firmware *fw, void *context));
void release_firmware(const struct firmware *fw);
-void register_firmware(const char *name, const u8 *data, size_t size);
#endif
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3de2bfb2410..f813bc8266a 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -213,6 +213,10 @@ extern int dir_notify_enable;
#define FIBMAP _IO(0x00,1) /* bmap access */
#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
+#define SYNC_FILE_RANGE_WAIT_BEFORE 1
+#define SYNC_FILE_RANGE_WRITE 2
+#define SYNC_FILE_RANGE_WAIT_AFTER 4
+
#ifdef __KERNEL__
#include <linux/linkage.h>
@@ -758,9 +762,6 @@ extern int fcntl_setlease(unsigned int fd, struct file *filp, long arg);
extern int fcntl_getlease(struct file *filp);
/* fs/sync.c */
-#define SYNC_FILE_RANGE_WAIT_BEFORE 1
-#define SYNC_FILE_RANGE_WRITE 2
-#define SYNC_FILE_RANGE_WAIT_AFTER 4
extern int do_sync_file_range(struct file *file, loff_t offset, loff_t endbyte,
unsigned int flags);
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index a3a0e078f79..16fbe59edeb 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -110,5 +110,16 @@ struct fsl_usb2_platform_data {
#define FSL_USB2_PORT0_ENABLED 0x00000001
#define FSL_USB2_PORT1_ENABLED 0x00000002
+struct fsl_spi_platform_data {
+ u32 initial_spmode; /* initial SPMODE value */
+ u16 bus_num;
+
+ /* board specific information */
+ u16 max_chipselect;
+ void (*activate_cs)(u8 cs, u8 polarity);
+ void (*deactivate_cs)(u8 cs, u8 polarity);
+ u32 sysclk;
+};
+
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
index dd7d627bf66..c115e9e840b 100644
--- a/include/linux/i2o.h
+++ b/include/linux/i2o.h
@@ -1114,8 +1114,11 @@ static inline struct i2o_message *i2o_msg_get(struct i2o_controller *c)
mmsg->mfa = readl(c->in_port);
if (unlikely(mmsg->mfa >= c->in_queue.len)) {
+ u32 mfa = mmsg->mfa;
+
mempool_free(mmsg, c->in_msg.mempool);
- if(mmsg->mfa == I2O_QUEUE_EMPTY)
+
+ if (mfa == I2O_QUEUE_EMPTY)
return ERR_PTR(-EBUSY);
return ERR_PTR(-EFAULT);
}
diff --git a/include/linux/input.h b/include/linux/input.h
index 50e338d2ffd..ce1a756c4c3 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -345,6 +345,8 @@ struct input_absinfo {
#define KEY_SAVE 234
#define KEY_DOCUMENTS 235
+#define KEY_BATTERY 236
+
#define KEY_UNKNOWN 240
#define BTN_MISC 0x100
@@ -577,14 +579,9 @@ struct input_absinfo {
* Switch events
*/
-#define SW_0 0x00
-#define SW_1 0x01
-#define SW_2 0x02
-#define SW_3 0x03
-#define SW_4 0x04
-#define SW_5 0x05
-#define SW_6 0x06
-#define SW_7 0x07
+#define SW_LID 0x00 /* set = lid shut */
+#define SW_TABLET_MODE 0x01 /* set = tablet mode */
+#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
#define SW_MAX 0x0f
/*
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index e1bd0842f6a..f4fc576ed4c 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -124,6 +124,7 @@ extern int get_option(char **str, int *pint);
extern char *get_options(const char *str, int nints, int *ints);
extern unsigned long long memparse(char *ptr, char **retptr);
+extern int core_kernel_text(unsigned long addr);
extern int __kernel_text_address(unsigned long addr);
extern int kernel_text_address(unsigned long addr);
extern int session_of_pgrp(int pgrp);
diff --git a/include/linux/m48t86.h b/include/linux/m48t86.h
index 9065199319d..915d6b4f0f8 100644
--- a/include/linux/m48t86.h
+++ b/include/linux/m48t86.h
@@ -11,6 +11,6 @@
struct m48t86_ops
{
- void (*writeb)(unsigned char value, unsigned long addr);
- unsigned char (*readb)(unsigned long addr);
+ void (*writebyte)(unsigned char value, unsigned long addr);
+ unsigned char (*readbyte)(unsigned long addr);
};
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index 6a7621b2b12..f5fdca1d67e 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -36,6 +36,7 @@
#include <linux/nodemask.h>
struct vm_area_struct;
+struct mm_struct;
#ifdef CONFIG_NUMA
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index bdc556d8849..03a14a30c46 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -69,6 +69,7 @@ struct mmc_data {
unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */
unsigned int timeout_clks; /* data timeout (in clocks) */
unsigned int blksz_bits; /* data block size */
+ unsigned int blksz; /* data block size */
unsigned int blocks; /* number of blocks */
unsigned int error; /* data error */
unsigned int flags;
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index b5c21122c29..2d833715049 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -15,6 +15,7 @@
#include <linux/seqlock.h>
#include <linux/nodemask.h>
#include <asm/atomic.h>
+#include <asm/page.h>
/* Free memory management - zoned buddy allocator. */
#ifndef CONFIG_FORCE_MAX_ZONEORDER
@@ -22,6 +23,7 @@
#else
#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
#endif
+#define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
struct free_area {
struct list_head free_list;
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 4877e35ae20..936ef82ed76 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -50,7 +50,7 @@
extern acpi_status pci_osc_control_set(acpi_handle handle, u32 flags);
extern acpi_status pci_osc_support_set(u32 flags);
#else
-#if !defined(acpi_status)
+#if !defined(AE_ERROR)
typedef u32 acpi_status;
#define AE_ERROR (acpi_status) (0x0001)
#endif
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index d6fe048376a..590dc6dca31 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1231,6 +1231,7 @@
#define PCI_DEVICE_ID_VIA_8380_0 0x0204
#define PCI_DEVICE_ID_VIA_3238_0 0x0238
#define PCI_DEVICE_ID_VIA_PT880 0x0258
+#define PCI_DEVICE_ID_VIA_PT880ULTRA 0x0308
#define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259
#define PCI_DEVICE_ID_VIA_3269_0 0x0269
#define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 5673008b61e..970284f571a 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -132,6 +132,7 @@ static inline void rcu_bh_qsctr_inc(int cpu)
}
extern int rcu_pending(int cpu);
+extern int rcu_needs_cpu(int cpu);
/**
* rcu_read_lock - mark the beginning of an RCU read-side critical section.
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 3af03b19c98..2d985d59c7b 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -150,6 +150,7 @@ static inline void *kcalloc(size_t n, size_t size, gfp_t flags)
extern void kfree(const void *);
extern unsigned int ksize(const void *);
+extern int slab_is_available(void);
#ifdef CONFIG_NUMA
extern void *kmem_cache_alloc_node(kmem_cache_t *, gfp_t flags, int node);
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index b05f1463a26..e928c0dcc29 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -31,18 +31,23 @@ extern struct bus_type spi_bus_type;
* @master: SPI controller used with the device.
* @max_speed_hz: Maximum clock rate to be used with this chip
* (on this board); may be changed by the device's driver.
+ * The spi_transfer.speed_hz can override this for each transfer.
* @chip-select: Chipselect, distinguishing chips handled by "master".
* @mode: The spi mode defines how data is clocked out and in.
* This may be changed by the device's driver.
+ * The "active low" default for chipselect mode can be overridden,
+ * as can the "MSB first" default for each word in a transfer.
* @bits_per_word: Data transfers involve one or more words; word sizes
- * like eight or 12 bits are common. In-memory wordsizes are
+ * like eight or 12 bits are common. In-memory wordsizes are
* powers of two bytes (e.g. 20 bit samples use 32 bits).
- * This may be changed by the device's driver.
+ * This may be changed by the device's driver, or left at the
+ * default (0) indicating protocol words are eight bit bytes.
+ * The spi_transfer.bits_per_word can override this for each transfer.
* @irq: Negative, or the number passed to request_irq() to receive
- * interrupts from this device.
+ * interrupts from this device.
* @controller_state: Controller's runtime state
* @controller_data: Board-specific definitions for controller, such as
- * FIFO initialization parameters; from board_info.controller_data
+ * FIFO initialization parameters; from board_info.controller_data
*
* An spi_device is used to interchange data between an SPI slave
* (usually a discrete chip) and CPU memory.
@@ -65,6 +70,7 @@ struct spi_device {
#define SPI_MODE_2 (SPI_CPOL|0)
#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
#define SPI_CS_HIGH 0x04 /* chipselect active high? */
+#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */
u8 bits_per_word;
int irq;
void *controller_state;
@@ -73,7 +79,6 @@ struct spi_device {
// likely need more hooks for more protocol options affecting how
// the controller talks to each chip, like:
- // - bit order (default is wordwise msb-first)
// - memory packing (12 bit samples into low bits, others zeroed)
// - priority
// - drop chipselect after each word
@@ -143,13 +148,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* struct spi_master - interface to SPI master controller
* @cdev: class interface to this driver
* @bus_num: board-specific (and often SOC-specific) identifier for a
- * given SPI controller.
+ * given SPI controller.
* @num_chipselect: chipselects are used to distinguish individual
- * SPI slaves, and are numbered from zero to num_chipselects.
- * each slave has a chipselect signal, but it's common that not
- * every chipselect is connected to a slave.
+ * SPI slaves, and are numbered from zero to num_chipselects.
+ * each slave has a chipselect signal, but it's common that not
+ * every chipselect is connected to a slave.
* @setup: updates the device mode and clocking records used by a
- * device's SPI controller; protocol code may call this.
+ * device's SPI controller; protocol code may call this.
* @transfer: adds a message to the controller's transfer queue.
* @cleanup: frees controller-specific state
*
@@ -167,13 +172,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
struct spi_master {
struct class_device cdev;
- /* other than zero (== assign one dynamically), bus_num is fully
+ /* other than negative (== assign one dynamically), bus_num is fully
* board-specific. usually that simplifies to being SOC-specific.
- * example: one SOC has three SPI controllers, numbered 1..3,
+ * example: one SOC has three SPI controllers, numbered 0..2,
* and one board's schematics might show it using SPI-2. software
* would normally use bus_num=2 for that controller.
*/
- u16 bus_num;
+ s16 bus_num;
/* chipselects will be integral to many controllers; some others
* might use board-specific GPIOs.
@@ -268,10 +273,14 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
* @tx_dma: DMA address of tx_buf, if spi_message.is_dma_mapped
* @rx_dma: DMA address of rx_buf, if spi_message.is_dma_mapped
* @len: size of rx and tx buffers (in bytes)
+ * @speed_hz: Select a speed other then the device default for this
+ * transfer. If 0 the default (from spi_device) is used.
+ * @bits_per_word: select a bits_per_word other then the device default
+ * for this transfer. If 0 the default (from spi_device) is used.
* @cs_change: affects chipselect after this transfer completes
* @delay_usecs: microseconds to delay after this transfer before
- * (optionally) changing the chipselect status, then starting
- * the next transfer or completing this spi_message.
+ * (optionally) changing the chipselect status, then starting
+ * the next transfer or completing this spi_message.
* @transfer_list: transfers are sequenced through spi_message.transfers
*
* SPI transfers always write the same number of bytes as they read.
@@ -322,7 +331,9 @@ struct spi_transfer {
dma_addr_t rx_dma;
unsigned cs_change:1;
+ u8 bits_per_word;
u16 delay_usecs;
+ u32 speed_hz;
struct list_head transfer_list;
};
@@ -356,7 +367,7 @@ struct spi_transfer {
* and its transfers, ignore them until its completion callback.
*/
struct spi_message {
- struct list_head transfers;
+ struct list_head transfers;
struct spi_device *spi;
@@ -374,7 +385,7 @@ struct spi_message {
*/
/* completion is reported through a callback */
- void (*complete)(void *context);
+ void (*complete)(void *context);
void *context;
unsigned actual_length;
int status;
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
index c961fe9bf3e..16ce178f54d 100644
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -30,6 +30,12 @@ struct spi_bitbang {
struct spi_master *master;
+ /* setup_transfer() changes clock and/or wordsize to match settings
+ * for this transfer; zeroes restore defaults from spi_device.
+ */
+ int (*setup_transfer)(struct spi_device *spi,
+ struct spi_transfer *t);
+
void (*chipselect)(struct spi_device *spi, int is_on);
#define BITBANG_CS_ACTIVE 1 /* normally nCS, active low */
#define BITBANG_CS_INACTIVE 0
@@ -51,6 +57,8 @@ struct spi_bitbang {
extern int spi_bitbang_setup(struct spi_device *spi);
extern void spi_bitbang_cleanup(const struct spi_device *spi);
extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
+extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t);
/* start or stop queue processing */
extern int spi_bitbang_start(struct spi_bitbang *spi);
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 5b1fdf1cff4..f03c2471930 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -296,7 +296,7 @@ static inline void disable_swap_token(void)
#define read_swap_cache_async(swp,vma,addr) NULL
#define lookup_swap_cache(swp) NULL
#define valid_swaphandles(swp, off) 0
-#define can_share_swap_page(p) 0
+#define can_share_swap_page(p) (page_mapcount(p) == 1)
#define move_to_swap_cache(p, swp) 1
#define move_from_swap_cache(p, i, m) 1
#define __delete_from_swap_cache(p) /*NOTHING*/
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 3996960fc56..60d49e5456e 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -52,6 +52,7 @@ struct utimbuf;
struct mq_attr;
struct compat_stat;
struct compat_timeval;
+struct robust_list_head;
#include <linux/config.h>
#include <linux/types.h>
@@ -581,5 +582,10 @@ asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags);
asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
unsigned int flags);
+asmlinkage long sys_get_robust_list(int pid,
+ struct robust_list_head __user **head_ptr,
+ size_t __user *len_ptr);
+asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
+ size_t len);
#endif
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index d7670ec1ec1..ad7fa9c86c1 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -1141,8 +1141,13 @@ extern char *v4l2_type_names[];
/* Compatibility layer interface -- v4l1-compat module */
typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
unsigned int cmd, void *arg);
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
int cmd, void *arg, v4l2_kioctl driver_ioctl);
+#else
+#define v4l_compat_translate_ioctl(inode,file,cmd,arg,ioctl) -EINVAL
+#endif
/* 32 Bits compatibility layer for 64 bits processors */
extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index 530ae3f4248..fab5aed8ca3 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -73,11 +73,6 @@ int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
int vt_waitactive(int vt);
void change_console(struct vc_data *new_vc);
void reset_vc(struct vc_data *vc);
-#ifdef CONFIG_VT
-int is_console_suspend_safe(void);
-#else
-static inline int is_console_suspend_safe(void) { return 1; }
-#endif
/*
* vc_screen.c shares this temporary buffer with the console write code so that
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 01:41:45 +0000