diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/cgroup_subsys.h | 6 | ||||
| -rw-r--r-- | include/linux/dccp.h | 27 | ||||
| -rw-r--r-- | include/linux/ieee80211.h | 152 | ||||
| -rw-r--r-- | include/linux/if.h | 1 | ||||
| -rw-r--r-- | include/linux/in.h | 4 | ||||
| -rw-r--r-- | include/linux/kernel.h | 12 | ||||
| -rw-r--r-- | include/linux/list_nulls.h | 94 | ||||
| -rw-r--r-- | include/linux/mdio-gpio.h | 25 | ||||
| -rw-r--r-- | include/linux/netdevice.h | 33 | ||||
| -rw-r--r-- | include/linux/nl80211.h | 147 | ||||
| -rw-r--r-- | include/linux/pkt_cls.h | 14 | ||||
| -rw-r--r-- | include/linux/rculist_nulls.h | 110 | ||||
| -rw-r--r-- | include/linux/skbuff.h | 19 | ||||
| -rw-r--r-- | include/linux/smsc911x.h | 42 | ||||
| -rw-r--r-- | include/linux/sunrpc/svc_xprt.h | 8 | ||||
| -rw-r--r-- | include/linux/virtio_net.h | 9 | ||||
| -rw-r--r-- | include/linux/xfrm.h | 14 |
17 files changed, 626 insertions, 91 deletions
diff --git a/include/linux/cgroup_subsys.h b/include/linux/cgroup_subsys.h index 9c22396e8b5..9c8d31bacf4 100644 --- a/include/linux/cgroup_subsys.h +++ b/include/linux/cgroup_subsys.h @@ -54,3 +54,9 @@ SUBSYS(freezer) #endif /* */ + +#ifdef CONFIG_NET_CLS_CGROUP +SUBSYS(net_cls) +#endif + +/* */ diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 6080449fbec..eda389ce04f 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -176,29 +176,23 @@ enum { }; /* DCCP features (RFC 4340 section 6.4) */ -enum { +enum dccp_feature_numbers { DCCPF_RESERVED = 0, DCCPF_CCID = 1, - DCCPF_SHORT_SEQNOS = 2, /* XXX: not yet implemented */ + DCCPF_SHORT_SEQNOS = 2, DCCPF_SEQUENCE_WINDOW = 3, - DCCPF_ECN_INCAPABLE = 4, /* XXX: not yet implemented */ + DCCPF_ECN_INCAPABLE = 4, DCCPF_ACK_RATIO = 5, DCCPF_SEND_ACK_VECTOR = 6, DCCPF_SEND_NDP_COUNT = 7, DCCPF_MIN_CSUM_COVER = 8, - DCCPF_DATA_CHECKSUM = 9, /* XXX: not yet implemented */ + DCCPF_DATA_CHECKSUM = 9, /* 10-127 reserved */ DCCPF_MIN_CCID_SPECIFIC = 128, + DCCPF_SEND_LEV_RATE = 192, /* RFC 4342, sec. 8.4 */ DCCPF_MAX_CCID_SPECIFIC = 255, }; -/* this structure is argument to DCCP_SOCKOPT_CHANGE_X */ -struct dccp_so_feat { - __u8 dccpsf_feat; - __u8 __user *dccpsf_val; - __u8 dccpsf_len; -}; - /* DCCP socket options */ #define DCCP_SOCKOPT_PACKET_SIZE 1 /* XXX deprecated, without effect */ #define DCCP_SOCKOPT_SERVICE 2 @@ -208,6 +202,7 @@ struct dccp_so_feat { #define DCCP_SOCKOPT_SERVER_TIMEWAIT 6 #define DCCP_SOCKOPT_SEND_CSCOV 10 #define DCCP_SOCKOPT_RECV_CSCOV 11 +#define DCCP_SOCKOPT_AVAILABLE_CCIDS 12 #define DCCP_SOCKOPT_CCID_RX_INFO 128 #define DCCP_SOCKOPT_CCID_TX_INFO 192 @@ -373,7 +368,6 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) * @dccpms_ccid - Congestion Control Id (CCID) (section 10) * @dccpms_send_ack_vector - Send Ack Vector Feature (section 11.5) * @dccpms_send_ndp_count - Send NDP Count Feature (7.7.2) - * @dccpms_ack_ratio - Ack Ratio Feature (section 11.3) * @dccpms_pending - List of features being negotiated * @dccpms_conf - */ @@ -383,7 +377,6 @@ struct dccp_minisock { __u8 dccpms_tx_ccid; __u8 dccpms_send_ack_vector; __u8 dccpms_send_ndp_count; - __u8 dccpms_ack_ratio; struct list_head dccpms_pending; struct list_head dccpms_conf; }; @@ -411,6 +404,7 @@ extern void dccp_minisock_init(struct dccp_minisock *dmsk); * @dreq_iss: initial sequence number sent on the Response (RFC 4340, 7.1) * @dreq_isr: initial sequence number received on the Request * @dreq_service: service code present on the Request (there is just one) + * @dreq_featneg: feature negotiation options for this connection * The following two fields are analogous to the ones in dccp_sock: * @dreq_timestamp_echo: last received timestamp to echo (13.1) * @dreq_timestamp_echo: the time of receiving the last @dreq_timestamp_echo @@ -420,6 +414,7 @@ struct dccp_request_sock { __u64 dreq_iss; __u64 dreq_isr; __be32 dreq_service; + struct list_head dreq_featneg; __u32 dreq_timestamp_echo; __u32 dreq_timestamp_time; }; @@ -497,6 +492,7 @@ struct dccp_ackvec; * @dccps_mss_cache - current value of MSS (path MTU minus header sizes) * @dccps_rate_last - timestamp for rate-limiting DCCP-Sync (RFC 4340, 7.5.4) * @dccps_minisock - associated minisock (accessed via dccp_msk) + * @dccps_featneg - tracks feature-negotiation state (mostly during handshake) * @dccps_hc_rx_ackvec - rx half connection ack vector * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection) * @dccps_hc_tx_ccid - CCID used for the sender (or sending half-connection) @@ -529,11 +525,12 @@ struct dccp_sock { __u32 dccps_timestamp_time; __u16 dccps_l_ack_ratio; __u16 dccps_r_ack_ratio; - __u16 dccps_pcslen; - __u16 dccps_pcrlen; + __u8 dccps_pcslen:4; + __u8 dccps_pcrlen:4; __u64 dccps_ndp_count:48; unsigned long dccps_rate_last; struct dccp_minisock dccps_minisock; + struct list_head dccps_featneg; struct dccp_ackvec *dccps_hc_rx_ackvec; struct ccid *dccps_hc_rx_ccid; struct ccid *dccps_hc_tx_ccid; diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 14126bc3664..56b0eb25d92 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -12,8 +12,8 @@ * published by the Free Software Foundation. */ -#ifndef IEEE80211_H -#define IEEE80211_H +#ifndef LINUX_IEEE80211_H +#define LINUX_IEEE80211_H #include <linux/types.h> #include <asm/byteorder.h> @@ -97,7 +97,10 @@ #define IEEE80211_MAX_FRAME_LEN 2352 #define IEEE80211_MAX_SSID_LEN 32 + #define IEEE80211_MAX_MESH_ID_LEN 32 +#define IEEE80211_MESH_CONFIG_LEN 19 + #define IEEE80211_QOS_CTL_LEN 2 #define IEEE80211_QOS_CTL_TID_MASK 0x000F #define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007 @@ -666,6 +669,13 @@ struct ieee80211_cts { u8 ra[6]; } __attribute__ ((packed)); +struct ieee80211_pspoll { + __le16 frame_control; + __le16 aid; + u8 bssid[6]; + u8 ta[6]; +} __attribute__ ((packed)); + /** * struct ieee80211_bar - HT Block Ack Request * @@ -685,28 +695,88 @@ struct ieee80211_bar { #define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 #define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 + +#define IEEE80211_HT_MCS_MASK_LEN 10 + +/** + * struct ieee80211_mcs_info - MCS information + * @rx_mask: RX mask + * @rx_highest: highest supported RX rate + * @tx_params: TX parameters + */ +struct ieee80211_mcs_info { + u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN]; + __le16 rx_highest; + u8 tx_params; + u8 reserved[3]; +} __attribute__((packed)); + +/* 802.11n HT capability MSC set */ +#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff +#define IEEE80211_HT_MCS_TX_DEFINED 0x01 +#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02 +/* value 0 == 1 stream etc */ +#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C +#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2 +#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4 +#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10 + +/* + * 802.11n D5.0 20.3.5 / 20.6 says: + * - indices 0 to 7 and 32 are single spatial stream + * - 8 to 31 are multiple spatial streams using equal modulation + * [8..15 for two streams, 16..23 for three and 24..31 for four] + * - remainder are multiple spatial streams using unequal modulation + */ +#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33 +#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \ + (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8) + /** * struct ieee80211_ht_cap - HT capabilities * - * This structure refers to "HT capabilities element" as - * described in 802.11n draft section 7.3.2.52 + * This structure is the "HT capabilities element" as + * described in 802.11n D5.0 7.3.2.57 */ struct ieee80211_ht_cap { __le16 cap_info; u8 ampdu_params_info; - u8 supp_mcs_set[16]; + + /* 16 bytes MCS information */ + struct ieee80211_mcs_info mcs; + __le16 extended_ht_cap_info; __le32 tx_BF_cap_info; u8 antenna_selection_info; } __attribute__ ((packed)); +/* 802.11n HT capabilities masks (for cap_info) */ +#define IEEE80211_HT_CAP_LDPC_CODING 0x0001 +#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002 +#define IEEE80211_HT_CAP_SM_PS 0x000C +#define IEEE80211_HT_CAP_GRN_FLD 0x0010 +#define IEEE80211_HT_CAP_SGI_20 0x0020 +#define IEEE80211_HT_CAP_SGI_40 0x0040 +#define IEEE80211_HT_CAP_TX_STBC 0x0080 +#define IEEE80211_HT_CAP_RX_STBC 0x0300 +#define IEEE80211_HT_CAP_DELAY_BA 0x0400 +#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 +#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 +#define IEEE80211_HT_CAP_PSMP_SUPPORT 0x2000 +#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 +#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 + +/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ +#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 +#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C + /** - * struct ieee80211_ht_cap - HT additional information + * struct ieee80211_ht_info - HT information * - * This structure refers to "HT information element" as - * described in 802.11n draft section 7.3.2.53 + * This structure is the "HT information element" as + * described in 802.11n D5.0 7.3.2.58 */ -struct ieee80211_ht_addt_info { +struct ieee80211_ht_info { u8 control_chan; u8 ht_param; __le16 operation_mode; @@ -714,36 +784,33 @@ struct ieee80211_ht_addt_info { u8 basic_set[16]; } __attribute__ ((packed)); -/* 802.11n HT capabilities masks */ -#define IEEE80211_HT_CAP_SUP_WIDTH 0x0002 -#define IEEE80211_HT_CAP_SM_PS 0x000C -#define IEEE80211_HT_CAP_GRN_FLD 0x0010 -#define IEEE80211_HT_CAP_SGI_20 0x0020 -#define IEEE80211_HT_CAP_SGI_40 0x0040 -#define IEEE80211_HT_CAP_DELAY_BA 0x0400 -#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 -#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 -/* 802.11n HT capability AMPDU settings */ -#define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03 -#define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C -/* 802.11n HT capability MSC set */ -#define IEEE80211_SUPP_MCS_SET_UEQM 4 -#define IEEE80211_HT_CAP_MAX_STREAMS 4 -#define IEEE80211_SUPP_MCS_SET_LEN 10 -/* maximum streams the spec allows */ -#define IEEE80211_HT_CAP_MCS_TX_DEFINED 0x01 -#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF 0x02 -#define IEEE80211_HT_CAP_MCS_TX_STREAMS 0x0C -#define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10 -/* 802.11n HT IE masks */ -#define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03 -#define IEEE80211_HT_IE_CHA_SEC_NONE 0x00 -#define IEEE80211_HT_IE_CHA_SEC_ABOVE 0x01 -#define IEEE80211_HT_IE_CHA_SEC_BELOW 0x03 -#define IEEE80211_HT_IE_CHA_WIDTH 0x04 -#define IEEE80211_HT_IE_HT_PROTECTION 0x0003 -#define IEEE80211_HT_IE_NON_GF_STA_PRSNT 0x0004 -#define IEEE80211_HT_IE_NON_HT_STA_PRSNT 0x0010 +/* for ht_param */ +#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03 +#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00 +#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01 +#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03 +#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04 +#define IEEE80211_HT_PARAM_RIFS_MODE 0x08 +#define IEEE80211_HT_PARAM_SPSMP_SUPPORT 0x10 +#define IEEE80211_HT_PARAM_SERV_INTERVAL_GRAN 0xE0 + +/* for operation_mode */ +#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1 +#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3 +#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004 +#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010 + +/* for stbc_param */ +#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040 +#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080 +#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100 +#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200 +#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400 +#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800 + /* block-ack parameters */ #define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002 @@ -769,8 +836,7 @@ struct ieee80211_ht_addt_info { /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 #define WLAN_AUTH_SHARED_KEY 1 -#define WLAN_AUTH_FAST_BSS_TRANSITION 2 -#define WLAN_AUTH_LEAP 128 +#define WLAN_AUTH_LEAP 2 #define WLAN_AUTH_CHALLENGE_LEN 128 @@ -949,7 +1015,7 @@ enum ieee80211_eid { WLAN_EID_EXT_SUPP_RATES = 50, /* 802.11n */ WLAN_EID_HT_CAPABILITY = 45, - WLAN_EID_HT_EXTRA_INFO = 61, + WLAN_EID_HT_INFORMATION = 61, /* 802.11i */ WLAN_EID_RSN = 48, WLAN_EID_WPA = 221, @@ -1057,4 +1123,4 @@ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) return hdr->addr1; } -#endif /* IEEE80211_H */ +#endif /* LINUX_IEEE80211_H */ diff --git a/include/linux/if.h b/include/linux/if.h index 65246846c84..2a6e29620a9 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -65,6 +65,7 @@ #define IFF_BONDING 0x20 /* bonding master or slave */ #define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */ #define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */ +#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */ #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 diff --git a/include/linux/in.h b/include/linux/in.h index db458beef19..d60122a3a08 100644 --- a/include/linux/in.h +++ b/include/linux/in.h @@ -80,6 +80,10 @@ struct in_addr { /* BSD compatibility */ #define IP_RECVRETOPTS IP_RETOPTS +/* TProxy original addresses */ +#define IP_ORIGDSTADDR 20 +#define IP_RECVORIGDSTADDR IP_ORIGDSTADDR + /* IP_MTU_DISCOVER values */ #define IP_PMTUDISC_DONT 0 /* Never send DF frames */ #define IP_PMTUDISC_WANT 1 /* Use per route hints */ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index dc7e0d0a647..6002ae76785 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -361,18 +361,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte) ((unsigned char *)&addr)[3] #define NIPQUAD_FMT "%u.%u.%u.%u" -#define NIP6(addr) \ - ntohs((addr).s6_addr16[0]), \ - ntohs((addr).s6_addr16[1]), \ - ntohs((addr).s6_addr16[2]), \ - ntohs((addr).s6_addr16[3]), \ - ntohs((addr).s6_addr16[4]), \ - ntohs((addr).s6_addr16[5]), \ - ntohs((addr).s6_addr16[6]), \ - ntohs((addr).s6_addr16[7]) -#define NIP6_FMT "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x" -#define NIP6_SEQFMT "%04x%04x%04x%04x%04x%04x%04x%04x" - #if defined(__LITTLE_ENDIAN) #define HIPQUAD(addr) \ ((unsigned char *)&addr)[3], \ diff --git a/include/linux/list_nulls.h b/include/linux/list_nulls.h new file mode 100644 index 00000000000..93150ecf3ea --- /dev/null +++ b/include/linux/list_nulls.h @@ -0,0 +1,94 @@ +#ifndef _LINUX_LIST_NULLS_H +#define _LINUX_LIST_NULLS_H + +/* + * Special version of lists, where end of list is not a NULL pointer, + * but a 'nulls' marker, which can have many different values. + * (up to 2^31 different values guaranteed on all platforms) + * + * In the standard hlist, termination of a list is the NULL pointer. + * In this special 'nulls' variant, we use the fact that objects stored in + * a list are aligned on a word (4 or 8 bytes alignment). + * We therefore use the last significant bit of 'ptr' : + * Set to 1 : This is a 'nulls' end-of-list marker (ptr >> 1) + * Set to 0 : This is a pointer to some object (ptr) + */ + +struct hlist_nulls_head { + struct hlist_nulls_node *first; +}; + +struct hlist_nulls_node { + struct hlist_nulls_node *next, **pprev; +}; +#define INIT_HLIST_NULLS_HEAD(ptr, nulls) \ + ((ptr)->first = (struct hlist_nulls_node *) (1UL | (((long)nulls) << 1))) + +#define hlist_nulls_entry(ptr, type, member) container_of(ptr,type,member) +/** + * ptr_is_a_nulls - Test if a ptr is a nulls + * @ptr: ptr to be tested + * + */ +static inline int is_a_nulls(const struct hlist_nulls_node *ptr) +{ + return ((unsigned long)ptr & 1); +} + +/** + * get_nulls_value - Get the 'nulls' value of the end of chain + * @ptr: end of chain + * + * Should be called only if is_a_nulls(ptr); + */ +static inline unsigned long get_nulls_value(const struct hlist_nulls_node *ptr) +{ + return ((unsigned long)ptr) >> 1; +} + +static inline int hlist_nulls_unhashed(const struct hlist_nulls_node *h) +{ + return !h->pprev; +} + +static inline int hlist_nulls_empty(const struct hlist_nulls_head *h) +{ + return is_a_nulls(h->first); +} + +static inline void __hlist_nulls_del(struct hlist_nulls_node *n) +{ + struct hlist_nulls_node *next = n->next; + struct hlist_nulls_node **pprev = n->pprev; + *pprev = next; + if (!is_a_nulls(next)) + next->pprev = pprev; +} + +/** + * hlist_nulls_for_each_entry - iterate over list of given type + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_node within the struct. + * + */ +#define hlist_nulls_for_each_entry(tpos, pos, head, member) \ + for (pos = (head)->first; \ + (!is_a_nulls(pos)) && \ + ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +/** + * hlist_nulls_for_each_entry_from - iterate over a hlist continuing from current point + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_node to use as a loop cursor. + * @member: the name of the hlist_node within the struct. + * + */ +#define hlist_nulls_for_each_entry_from(tpos, pos, member) \ + for (; (!is_a_nulls(pos)) && \ + ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1;}); \ + pos = pos->next) + +#endif diff --git a/include/linux/mdio-gpio.h b/include/linux/mdio-gpio.h new file mode 100644 index 00000000000..e9d3fdfe41d --- /dev/null +++ b/include/linux/mdio-gpio.h @@ -0,0 +1,25 @@ +/* + * MDIO-GPIO bus platform data structures + * + * Copyright (C) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __LINUX_MDIO_GPIO_H +#define __LINUX_MDIO_GPIO_H + +#include <linux/mdio-bitbang.h> + +struct mdio_gpio_platform_data { + /* GPIO numbers for bus pins */ + unsigned int mdc; + unsigned int mdio; + + unsigned int phy_mask; + int irqs[PHY_MAX_ADDR]; +}; + +#endif /* __LINUX_MDIO_GPIO_H */ diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 9d77b1d7dca..12d7f4469dc 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1742,26 +1742,31 @@ static inline int skb_bond_should_drop(struct sk_buff *skb) struct net_device *dev = skb->dev; struct net_device *master = dev->master; - if (master && - (dev->priv_flags & IFF_SLAVE_INACTIVE)) { - if ((dev->priv_flags & IFF_SLAVE_NEEDARP) && - skb->protocol == __constant_htons(ETH_P_ARP)) - return 0; - - if (master->priv_flags & IFF_MASTER_ALB) { - if (skb->pkt_type != PACKET_BROADCAST && - skb->pkt_type != PACKET_MULTICAST) + if (master) { + if (master->priv_flags & IFF_MASTER_ARPMON) + dev->last_rx = jiffies; + + if (dev->priv_flags & IFF_SLAVE_INACTIVE) { + if ((dev->priv_flags & IFF_SLAVE_NEEDARP) && + skb->protocol == __constant_htons(ETH_P_ARP)) return 0; - } - if (master->priv_flags & IFF_MASTER_8023AD && - skb->protocol == __constant_htons(ETH_P_SLOW)) - return 0; - return 1; + if (master->priv_flags & IFF_MASTER_ALB) { + if (skb->pkt_type != PACKET_BROADCAST && + skb->pkt_type != PACKET_MULTICAST) + return 0; + } + if (master->priv_flags & IFF_MASTER_8023AD && + skb->protocol == __constant_htons(ETH_P_SLOW)) + return 0; + + return 1; + } } return 0; } +extern struct pernet_operations __net_initdata loopback_net_ops; #endif /* __KERNEL__ */ #endif /* _LINUX_DEV_H */ diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 9bad65400fb..79827345351 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -25,8 +25,9 @@ * * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request * to get a list of all present wiphys. - * @NL80211_CMD_SET_WIPHY: set wiphy name, needs %NL80211_ATTR_WIPHY and - * %NL80211_ATTR_WIPHY_NAME. + * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or + * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME + * and/or %NL80211_ATTR_WIPHY_TXQ_PARAMS. * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request * or rename notification. Has attributes %NL80211_ATTR_WIPHY and * %NL80211_ATTR_WIPHY_NAME. @@ -106,6 +107,12 @@ * to the the specified ISO/IEC 3166-1 alpha2 country code. The core will * store this as a valid request and then query userspace for it. * + * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * + * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the + * interface identified by %NL80211_ATTR_IFINDEX + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -148,6 +155,9 @@ enum nl80211_commands { NL80211_CMD_SET_REG, NL80211_CMD_REQ_SET_REG, + NL80211_CMD_GET_MESH_PARAMS, + NL80211_CMD_SET_MESH_PARAMS, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -169,6 +179,7 @@ enum nl80211_commands { * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. * /sys/class/ieee80211/<phyname>/index * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) + * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters * * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on * @NL80211_ATTR_IFNAME: network interface name @@ -234,6 +245,9 @@ enum nl80211_commands { * (u8, 0 or 1) * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled * (u8, 0 or 1) + * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic + * rates in format defined by IEEE 802.11 7.3.2.2 but without the length + * restriction (at most %NL80211_MAX_SUPP_RATES). * * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from * association request when used with NL80211_CMD_NEW_STATION) @@ -296,6 +310,12 @@ enum nl80211_attrs { NL80211_ATTR_REG_ALPHA2, NL80211_ATTR_REG_RULES, + NL80211_ATTR_MESH_PARAMS, + + NL80211_ATTR_BSS_BASIC_RATES, + + NL80211_ATTR_WIPHY_TXQ_PARAMS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -307,6 +327,8 @@ enum nl80211_attrs { * here */ #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY +#define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES +#define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS #define NL80211_MAX_SUPP_RATES 32 #define NL80211_MAX_SUPP_REG_RULES 32 @@ -452,17 +474,29 @@ enum nl80211_mpath_info { * an array of nested frequency attributes * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, * an array of nested bitrate attributes + * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as + * defined in 802.11n + * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE + * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n + * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n */ enum nl80211_band_attr { __NL80211_BAND_ATTR_INVALID, NL80211_BAND_ATTR_FREQS, NL80211_BAND_ATTR_RATES, + NL80211_BAND_ATTR_HT_MCS_SET, + NL80211_BAND_ATTR_HT_CAPA, + NL80211_BAND_ATTR_HT_AMPDU_FACTOR, + NL80211_BAND_ATTR_HT_AMPDU_DENSITY, + /* keep last */ __NL80211_BAND_ATTR_AFTER_LAST, NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 }; +#define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA + /** * enum nl80211_frequency_attr - frequency attributes * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz @@ -594,4 +628,113 @@ enum nl80211_mntr_flags { NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 }; +/** + * enum nl80211_meshconf_params - mesh configuration parameters + * + * Mesh configuration parameters + * + * @__NL80211_MESHCONF_INVALID: internal use + * + * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in + * millisecond units, used by the Peer Link Open message + * + * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the inital confirm timeout, in + * millisecond units, used by the peer link management to close a peer link + * + * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in + * millisecond units + * + * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed + * on this mesh interface + * + * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link + * open retries that can be sent to establish a new peer link instance in a + * mesh + * + * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh + * point. + * + * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically + * open peer links when we detect compatible mesh peers. + * + * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames + * containing a PREQ that an MP can send to a particular destination (path + * target) + * + * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths + * (in milliseconds) + * + * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait + * until giving up on a path discovery (in milliseconds) + * + * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh + * points receiving a PREQ shall consider the forwarding information from the + * root to be valid. (TU = time unit) + * + * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element + * + * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) + * that it takes for an HWMP information element to propagate across the mesh + * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * + * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use + */ +enum nl80211_meshconf_params { + __NL80211_MESHCONF_INVALID, + NL80211_MESHCONF_RETRY_TIMEOUT, + NL80211_MESHCONF_CONFIRM_TIMEOUT, + NL80211_MESHCONF_HOLDING_TIMEOUT, + NL80211_MESHCONF_MAX_PEER_LINKS, + NL80211_MESHCONF_MAX_RETRIES, + NL80211_MESHCONF_TTL, + NL80211_MESHCONF_AUTO_OPEN_PLINKS, + NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, + NL80211_MESHCONF_PATH_REFRESH_TIME, + NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, + NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, + NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, + NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + + /* keep last */ + __NL80211_MESHCONF_ATTR_AFTER_LAST, + NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 +}; + +/** + * enum nl80211_txq_attr - TX queue parameter attributes + * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved + * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*) + * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning + * disabled + * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form + * 2^n-1 in the range 1..32767] + * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] + * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal + * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number + */ +enum nl80211_txq_attr { + __NL80211_TXQ_ATTR_INVALID, + NL80211_TXQ_ATTR_QUEUE, + NL80211_TXQ_ATTR_TXOP, + NL80211_TXQ_ATTR_CWMIN, + NL80211_TXQ_ATTR_CWMAX, + NL80211_TXQ_ATTR_AIFS, + + /* keep last */ + __NL80211_TXQ_ATTR_AFTER_LAST, + NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 +}; + +enum nl80211_txq_q { + NL80211_TXQ_Q_VO, + NL80211_TXQ_Q_VI, + NL80211_TXQ_Q_BE, + NL80211_TXQ_Q_BK +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h index 7cf7824df77..e6aa8482ad7 100644 --- a/include/linux/pkt_cls.h +++ b/include/linux/pkt_cls.h @@ -394,6 +394,20 @@ enum #define TCA_BASIC_MAX (__TCA_BASIC_MAX - 1) + +/* Cgroup classifier */ + +enum +{ + TCA_CGROUP_UNSPEC, + TCA_CGROUP_ACT, + TCA_CGROUP_POLICE, + TCA_CGROUP_EMATCHES, + __TCA_CGROUP_MAX, +}; + +#define TCA_CGROUP_MAX (__TCA_CGROUP_MAX - 1) + /* Extended Matches */ struct tcf_ematch_tree_hdr diff --git a/include/linux/rculist_nulls.h b/include/linux/rculist_nulls.h new file mode 100644 index 00000000000..f9ddd03961a --- /dev/null +++ b/include/linux/rculist_nulls.h @@ -0,0 +1,110 @@ +#ifndef _LINUX_RCULIST_NULLS_H +#define _LINUX_RCULIST_NULLS_H + +#ifdef __KERNEL__ + +/* + * RCU-protected list version + */ +#include <linux/list_nulls.h> +#include <linux/rcupdate.h> + +/** + * hlist_nulls_del_init_rcu - deletes entry from hash list with re-initialization + * @n: the element to delete from the hash list. + * + * Note: hlist_nulls_unhashed() on the node return true after this. It is + * useful for RCU based read lockfree traversal if the writer side + * must know if the list entry is still hashed or already unhashed. + * + * In particular, it means that we can not poison the forward pointers + * that may still be used for walking the hash list and we can only + * zero the pprev pointer so list_unhashed() will return true after + * this. + * + * The caller must take whatever precautions are necessary (such as + * holding appropriate locks) to avoid racing with another + * list-mutation primitive, such as hlist_nulls_add_head_rcu() or + * hlist_nulls_del_rcu(), running on this same list. However, it is + * perfectly legal to run concurrently with the _rcu list-traversal + * primitives, such as hlist_nulls_for_each_entry_rcu(). + */ +static inline void hlist_nulls_del_init_rcu(struct hlist_nulls_node *n) +{ + if (!hlist_nulls_unhashed(n)) { + __hlist_nulls_del(n); + n->pprev = NULL; + } +} + +/** + * hlist_nulls_del_rcu - deletes entry from hash list without re-initialization + * @n: the element to delete from the hash list. + * + * Note: hlist_nulls_unhashed() on entry does not return true after this, + * the entry is in an undefined state. It is useful for RCU based + * lockfree traversal. + * + * In particular, it means that we can not poison the forward + * pointers that may still be used for walking the hash list. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as hlist_nulls_add_head_rcu() + * or hlist_nulls_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * hlist_nulls_for_each_entry(). + */ +static inline void hlist_nulls_del_rcu(struct hlist_nulls_node *n) +{ + __hlist_nulls_del(n); + n->pprev = LIST_POISON2; +} + +/** + * hlist_nulls_add_head_rcu + * @n: the element to add to the hash list. + * @h: the list to add to. + * + * Description: + * Adds the specified element to the specified hlist_nulls, + * while permitting racing traversals. + * + * The caller must take whatever precautions are necessary + * (such as holding appropriate locks) to avoid racing + * with another list-mutation primitive, such as hlist_nulls_add_head_rcu() + * or hlist_nulls_del_rcu(), running on this same list. + * However, it is perfectly legal to run concurrently with + * the _rcu list-traversal primitives, such as + * hlist_nulls_for_each_entry_rcu(), used to prevent memory-consistency + * problems on Alpha CPUs. Regardless of the type of CPU, the + * list-traversal primitive must be guarded by rcu_read_lock(). + */ +static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n, + struct hlist_nulls_head *h) +{ + struct hlist_nulls_node *first = h->first; + + n->next = first; + n->pprev = &h->first; + rcu_assign_pointer(h->first, n); + if (!is_a_nulls(first)) + first->pprev = &n->next; +} +/** + * hlist_nulls_for_each_entry_rcu - iterate over rcu list of given type + * @tpos: the type * to use as a loop cursor. + * @pos: the &struct hlist_nulls_node to use as a loop cursor. + * @head: the head for your list. + * @member: the name of the hlist_nulls_node within the struct. + * + */ +#define hlist_nulls_for_each_entry_rcu(tpos, pos, head, member) \ + for (pos = rcu_dereference((head)->first); \ + (!is_a_nulls(pos)) && \ + ({ tpos = hlist_nulls_entry(pos, typeof(*tpos), member); 1; }); \ + pos = rcu_dereference(pos->next)) + +#endif +#endif diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 2725f4e5a9b..a01b6f84e3b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -250,6 +250,9 @@ typedef unsigned char *sk_buff_data_t; * @tc_verd: traffic control verdict * @ndisc_nodetype: router type (from link layer) * @do_not_encrypt: set to prevent encryption of this frame + * @requeue: set to indicate that the wireless core should attempt + * a software retry on this frame if we failed to + * receive an ACK for it * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking @@ -269,8 +272,9 @@ struct sk_buff { struct dst_entry *dst; struct rtable *rtable; }; +#ifdef CONFIG_XFRM struct sec_path *sp; - +#endif /* * This is the control buffer. It is free to use for every * layer. Please put your private variables there. If you @@ -325,6 +329,7 @@ struct sk_buff { #endif #if defined(CONFIG_MAC80211) || defined(CONFIG_MAC80211_MODULE) __u8 do_not_encrypt:1; + __u8 requeue:1; #endif /* 0/13/14 bit hole */ @@ -1864,6 +1869,18 @@ static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_bu to->queue_mapping = from->queue_mapping; } +#ifdef CONFIG_XFRM +static inline struct sec_path *skb_sec_path(struct sk_buff *skb) +{ + return skb->sp; +} +#else +static inline struct sec_path *skb_sec_path(struct sk_buff *skb) +{ + return NULL; +} +#endif + static inline int skb_is_gso(const struct sk_buff *skb) { return skb_shinfo(skb)->gso_size; diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h new file mode 100644 index 00000000000..47c4ffd10db --- /dev/null +++ b/include/linux/smsc911x.h @@ -0,0 +1,42 @@ +/*************************************************************************** + * + * Copyright (C) 2004-2008 SMSC + * Copyright (C) 2005-2008 ARM + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + ***************************************************************************/ +#ifndef __LINUX_SMSC911X_H__ +#define __LINUX_SMSC911X_H__ + +#include <linux/phy.h> + +/* platform_device configuration data, should be assigned to + * the platform_device's dev.platform_data */ +struct smsc911x_platform_config { + unsigned int irq_polarity; + unsigned int irq_type; + phy_interface_t phy_interface; +}; + +/* Constants for platform_device irq polarity configuration */ +#define SMSC911X_IRQ_POLARITY_ACTIVE_LOW 0 +#define SMSC911X_IRQ_POLARITY_ACTIVE_HIGH 1 + +/* Constants for platform_device irq type configuration */ +#define SMSC911X_IRQ_TYPE_OPEN_DRAIN 0 +#define SMSC911X_IRQ_TYPE_PUSH_PULL 1 + +#endif /* __LINUX_SMSC911X_H__ */ diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index 6fd7b016517..0127daca435 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -139,14 +139,14 @@ static inline char *__svc_print_addr(struct sockaddr *addr, { switch (addr->sa_family) { case AF_INET: - snprintf(buf, len, "%u.%u.%u.%u, port=%u", - NIPQUAD(((struct sockaddr_in *) addr)->sin_addr), + snprintf(buf, len, "%pI4, port=%u", + &((struct sockaddr_in *)addr)->sin_addr, ntohs(((struct sockaddr_in *) addr)->sin_port)); break; case AF_INET6: - snprintf(buf, len, "%x:%x:%x:%x:%x:%x:%x:%x, port=%u", - NIP6(((struct sockaddr_in6 *) addr)->sin6_addr), + snprintf(buf, len, "%pI6, port=%u", + &((struct sockaddr_in6 *)addr)->sin6_addr, ntohs(((struct sockaddr_in6 *) addr)->sin6_port)); break; diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 5e33761b9b8..5cdd0aa8bde 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -20,6 +20,7 @@ #define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */ #define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */ #define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */ +#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */ struct virtio_net_config { @@ -44,4 +45,12 @@ struct virtio_net_hdr __u16 csum_start; /* Position to start checksumming from */ __u16 csum_offset; /* Offset after that to place checksum */ }; + +/* This is the version of the header to use when the MRG_RXBUF + * feature has been negotiated. */ +struct virtio_net_hdr_mrg_rxbuf { + struct virtio_net_hdr hdr; + __u16 num_buffers; /* Number of merged rx buffers */ +}; + #endif /* _LINUX_VIRTIO_NET_H */ diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h index 4bc1e6b86cb..52f3abd453a 100644 --- a/include/linux/xfrm.h +++ b/include/linux/xfrm.h @@ -199,6 +199,9 @@ enum { #define XFRM_MSG_NEWSPDINFO XFRM_MSG_NEWSPDINFO XFRM_MSG_GETSPDINFO, #define XFRM_MSG_GETSPDINFO XFRM_MSG_GETSPDINFO + + XFRM_MSG_MAPPING, +#define XFRM_MSG_MAPPING XFRM_MSG_MAPPING __XFRM_MSG_MAX }; #define XFRM_MSG_MAX (__XFRM_MSG_MAX - 1) @@ -438,6 +441,15 @@ struct xfrm_user_migrate { __u16 new_family; }; +struct xfrm_user_mapping { + struct xfrm_usersa_id id; + __u32 reqid; + xfrm_address_t old_saddr; + xfrm_address_t new_saddr; + __be16 old_sport; + __be16 new_sport; +}; + #ifndef __KERNEL__ /* backwards compatibility for userspace */ #define XFRMGRP_ACQUIRE 1 @@ -464,6 +476,8 @@ enum xfrm_nlgroups { #define XFRMNLGRP_REPORT XFRMNLGRP_REPORT XFRMNLGRP_MIGRATE, #define XFRMNLGRP_MIGRATE XFRMNLGRP_MIGRATE + XFRMNLGRP_MAPPING, +#define XFRMNLGRP_MAPPING XFRMNLGRP_MAPPING __XFRMNLGRP_MAX }; #define XFRMNLGRP_MAX (__XFRMNLGRP_MAX - 1) |