diff options
Diffstat (limited to 'include/mtd/ubi-user.h')
| -rw-r--r-- | include/mtd/ubi-user.h | 76 |
1 files changed, 65 insertions, 11 deletions
diff --git a/include/mtd/ubi-user.h b/include/mtd/ubi-user.h index a7421f130cc..ccdc562e444 100644 --- a/include/mtd/ubi-user.h +++ b/include/mtd/ubi-user.h @@ -58,6 +58,13 @@ * device should be used. A &struct ubi_rsvol_req object has to be properly * filled and a pointer to it has to be passed to the IOCTL. * + * UBI volumes re-name + * ~~~~~~~~~~~~~~~~~~~ + * + * To re-name several volumes atomically at one go, the %UBI_IOCRNVOL command + * of the UBI character device should be used. A &struct ubi_rnvol_req object + * has to be properly filled and a pointer to it has to be passed to the IOCTL. + * * UBI volume update * ~~~~~~~~~~~~~~~~~ * @@ -104,6 +111,8 @@ #define UBI_IOCRMVOL _IOW(UBI_IOC_MAGIC, 1, int32_t) /* Re-size an UBI volume */ #define UBI_IOCRSVOL _IOW(UBI_IOC_MAGIC, 2, struct ubi_rsvol_req) +/* Re-name volumes */ +#define UBI_IOCRNVOL _IOW(UBI_IOC_MAGIC, 3, struct ubi_rnvol_req) /* IOCTL commands of the UBI control character device */ @@ -128,6 +137,9 @@ /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127 +/* Maximum amount of UBI volumes that can be re-named at one go */ +#define UBI_MAX_RNVOL 32 + /* * UBI data type hint constants. * @@ -176,20 +188,20 @@ enum { * it will be 512 in case of a 2KiB page NAND flash with 4 512-byte sub-pages. * * But in rare cases, if this optimizes things, the VID header may be placed to - * a different offset. For example, the boot-loader might do things faster if the - * VID header sits at the end of the first 2KiB NAND page with 4 sub-pages. As - * the boot-loader would not normally need to read EC headers (unless it needs - * UBI in RW mode), it might be faster to calculate ECC. This is weird example, - * but it real-life example. So, in this example, @vid_hdr_offer would be - * 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes - * aligned, which is OK, as UBI is clever enough to realize this is 4th sub-page - * of the first page and add needed padding. + * a different offset. For example, the boot-loader might do things faster if + * the VID header sits at the end of the first 2KiB NAND page with 4 sub-pages. + * As the boot-loader would not normally need to read EC headers (unless it + * needs UBI in RW mode), it might be faster to calculate ECC. This is weird + * example, but it real-life example. So, in this example, @vid_hdr_offer would + * be 2KiB-64 bytes = 1984. Note, that this position is not even 512-bytes + * aligned, which is OK, as UBI is clever enough to realize this is 4th + * sub-page of the first page and add needed padding. */ struct ubi_attach_req { int32_t ubi_num; int32_t mtd_num; int32_t vid_hdr_offset; - uint8_t padding[12]; + int8_t padding[12]; }; /** @@ -251,6 +263,48 @@ struct ubi_rsvol_req { } __attribute__ ((packed)); /** + * struct ubi_rnvol_req - volumes re-name request. + * @count: count of volumes to re-name + * @padding1: reserved for future, not used, has to be zeroed + * @vol_id: ID of the volume to re-name + * @name_len: name length + * @padding2: reserved for future, not used, has to be zeroed + * @name: new volume name + * + * UBI allows to re-name up to %32 volumes at one go. The count of volumes to + * re-name is specified in the @count field. The ID of the volumes to re-name + * and the new names are specified in the @vol_id and @name fields. + * + * The UBI volume re-name operation is atomic, which means that should power cut + * happen, the volumes will have either old name or new name. So the possible + * use-cases of this command is atomic upgrade. Indeed, to upgrade, say, volumes + * A and B one may create temporary volumes %A1 and %B1 with the new contents, + * then atomically re-name A1->A and B1->B, in which case old %A and %B will + * be removed. + * + * If it is not desirable to remove old A and B, the re-name request has to + * contain 4 entries: A1->A, A->A1, B1->B, B->B1, in which case old A1 and B1 + * become A and B, and old A and B will become A1 and B1. + * + * It is also OK to request: A1->A, A1->X, B1->B, B->Y, in which case old A1 + * and B1 become A and B, and old A and B become X and Y. + * + * In other words, in case of re-naming into an existing volume name, the + * existing volume is removed, unless it is re-named as well at the same + * re-name request. + */ +struct ubi_rnvol_req { + int32_t count; + int8_t padding1[12]; + struct { + int32_t vol_id; + int16_t name_len; + int8_t padding2[2]; + char name[UBI_MAX_VOLUME_NAME + 1]; + } ents[UBI_MAX_RNVOL]; +} __attribute__ ((packed)); + +/** * struct ubi_leb_change_req - a data structure used in atomic logical * eraseblock change requests. * @lnum: logical eraseblock number to change @@ -261,8 +315,8 @@ struct ubi_rsvol_req { struct ubi_leb_change_req { int32_t lnum; int32_t bytes; - uint8_t dtype; - uint8_t padding[7]; + int8_t dtype; + int8_t padding[7]; } __attribute__ ((packed)); #endif /* __UBI_USER_H__ */ |