diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 560 |
1 files changed, 341 insertions, 219 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9083bafb63c..4a80d74975e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -38,7 +38,11 @@ * called in hardware interrupt context. The low-level driver must not call any * other functions in hardware interrupt context. If there is a need for such * call, the low-level driver should first ACK the interrupt and perform the - * IEEE 802.11 code call after this, e.g. from a scheduled workqueue function. + * IEEE 802.11 code call after this, e.g. from a scheduled workqueue or even + * tasklet function. + * + * NOTE: If the driver opts to use the _irqsafe() functions, it may not also + * use the non-irqsafe functions! */ /** @@ -69,93 +73,12 @@ * not do so then mac80211 may add this under certain circumstances. */ -#define IEEE80211_CHAN_W_SCAN 0x00000001 -#define IEEE80211_CHAN_W_ACTIVE_SCAN 0x00000002 -#define IEEE80211_CHAN_W_IBSS 0x00000004 - -/* Channel information structure. Low-level driver is expected to fill in chan, - * freq, and val fields. Other fields will be filled in by 80211.o based on - * hostapd information and low-level driver does not need to use them. The - * limits for each channel will be provided in 'struct ieee80211_conf' when - * configuring the low-level driver with hw->config callback. If a device has - * a default regulatory domain, IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED - * can be set to let the driver configure all fields */ -struct ieee80211_channel { - short chan; /* channel number (IEEE 802.11) */ - short freq; /* frequency in MHz */ - int val; /* hw specific value for the channel */ - int flag; /* flag for hostapd use (IEEE80211_CHAN_*) */ - unsigned char power_level; - unsigned char antenna_max; -}; - -#define IEEE80211_RATE_ERP 0x00000001 -#define IEEE80211_RATE_BASIC 0x00000002 -#define IEEE80211_RATE_PREAMBLE2 0x00000004 -#define IEEE80211_RATE_SUPPORTED 0x00000010 -#define IEEE80211_RATE_OFDM 0x00000020 -#define IEEE80211_RATE_CCK 0x00000040 -#define IEEE80211_RATE_MANDATORY 0x00000100 - -#define IEEE80211_RATE_CCK_2 (IEEE80211_RATE_CCK | IEEE80211_RATE_PREAMBLE2) -#define IEEE80211_RATE_MODULATION(f) \ - (f & (IEEE80211_RATE_CCK | IEEE80211_RATE_OFDM)) - -/* Low-level driver should set PREAMBLE2, OFDM and CCK flags. - * BASIC, SUPPORTED, ERP, and MANDATORY flags are set in 80211.o based on the - * configuration. */ -struct ieee80211_rate { - int rate; /* rate in 100 kbps */ - int val; /* hw specific value for the rate */ - int flags; /* IEEE80211_RATE_ flags */ - int val2; /* hw specific value for the rate when using short preamble - * (only when IEEE80211_RATE_PREAMBLE2 flag is set, i.e., for - * 2, 5.5, and 11 Mbps) */ - signed char min_rssi_ack; - unsigned char min_rssi_ack_delta; - - /* following fields are set by 80211.o and need not be filled by the - * low-level driver */ - int rate_inv; /* inverse of the rate (LCM(all rates) / rate) for - * optimizing channel utilization estimates */ -}; - /** - * enum ieee80211_phymode - PHY modes - * - * @MODE_IEEE80211A: 5GHz as defined by 802.11a/802.11h - * @MODE_IEEE80211B: 2.4 GHz as defined by 802.11b - * @MODE_IEEE80211G: 2.4 GHz as defined by 802.11g (with OFDM), - * backwards compatible with 11b mode - * @NUM_IEEE80211_MODES: internal + * enum ieee80211_notification_type - Low level driver notification + * @IEEE80211_NOTIFY_RE_ASSOC: start the re-association sequence */ -enum ieee80211_phymode { - MODE_IEEE80211A, - MODE_IEEE80211B, - MODE_IEEE80211G, - - /* keep last */ - NUM_IEEE80211_MODES -}; - -/** - * struct ieee80211_ht_info - describing STA's HT capabilities - * - * This structure describes most essential parameters needed - * to describe 802.11n HT capabilities for an STA. - * - * @ht_supported: is HT supported by STA, 0: no, 1: yes - * @cap: HT capabilities map as described in 802.11n spec - * @ampdu_factor: Maximum A-MPDU length factor - * @ampdu_density: Minimum A-MPDU spacing - * @supp_mcs_set: Supported MCS set as described in 802.11n spec - */ -struct ieee80211_ht_info { - u8 ht_supported; - u16 cap; /* use IEEE80211_HT_CAP_ */ - u8 ampdu_factor; - u8 ampdu_density; - u8 supp_mcs_set[16]; +enum ieee80211_notification_types { + IEEE80211_NOTIFY_RE_ASSOC, }; /** @@ -175,46 +98,22 @@ struct ieee80211_ht_bss_info { }; /** - * struct ieee80211_hw_mode - PHY mode definition - * - * This structure describes the capabilities supported by the device - * in a single PHY mode. - * - * @list: internal - * @channels: pointer to array of supported channels - * @rates: pointer to array of supported bitrates - * @mode: the PHY mode for this definition - * @num_channels: number of supported channels - * @num_rates: number of supported bitrates - * @ht_info: PHY's 802.11n HT abilities for this mode - */ -struct ieee80211_hw_mode { - struct list_head list; - struct ieee80211_channel *channels; - struct ieee80211_rate *rates; - enum ieee80211_phymode mode; - int num_channels; - int num_rates; - struct ieee80211_ht_info ht_info; -}; - -/** * struct ieee80211_tx_queue_params - transmit queue configuration * * The information provided in this structure is required for QoS - * transmit queue configuration. + * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29. * * @aifs: arbitration interface space [0..255, -1: use default] * @cw_min: minimum contention window [will be a value of the form * 2^n-1 in the range 1..1023; 0: use default] * @cw_max: maximum contention window [like @cw_min] - * @burst_time: maximum burst time in units of 0.1ms, 0 meaning disabled + * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled */ struct ieee80211_tx_queue_params { - int aifs; - int cw_min; - int cw_max; - int burst_time; + s16 aifs; + u16 cw_min; + u16 cw_max; + u16 txop; }; /** @@ -246,6 +145,7 @@ struct ieee80211_tx_queue_stats_data { * @IEEE80211_TX_QUEUE_AFTER_BEACON: transmit queue for frames to be * sent after a beacon * @IEEE80211_TX_QUEUE_BEACON: transmit queue for beacon frames + * @NUM_TX_DATA_QUEUES_AMPDU: adding more queues for A-MPDU */ enum ieee80211_tx_queue { IEEE80211_TX_QUEUE_DATA0, @@ -261,11 +161,12 @@ enum ieee80211_tx_queue { * this struct need to have fixed values. As soon as it is removed, we can * fix these entries. */ IEEE80211_TX_QUEUE_AFTER_BEACON = 6, - IEEE80211_TX_QUEUE_BEACON = 7 + IEEE80211_TX_QUEUE_BEACON = 7, + NUM_TX_DATA_QUEUES_AMPDU = 16 }; struct ieee80211_tx_queue_stats { - struct ieee80211_tx_queue_stats_data data[NUM_TX_DATA_QUEUES]; + struct ieee80211_tx_queue_stats_data data[NUM_TX_DATA_QUEUES_AMPDU]; }; struct ieee80211_low_level_stats { @@ -285,11 +186,13 @@ struct ieee80211_low_level_stats { * also implies a change in the AID. * @BSS_CHANGED_ERP_CTS_PROT: CTS protection changed * @BSS_CHANGED_ERP_PREAMBLE: preamble changed + * @BSS_CHANGED_HT: 802.11n parameters changed */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, BSS_CHANGED_ERP_CTS_PROT = 1<<1, BSS_CHANGED_ERP_PREAMBLE = 1<<2, + BSS_CHANGED_HT = 1<<4, }; /** @@ -302,6 +205,12 @@ enum ieee80211_bss_change { * @aid: association ID number, valid only when @assoc is true * @use_cts_prot: use CTS protection * @use_short_preamble: use 802.11b short preamble + * @timestamp: beacon timestamp + * @beacon_int: beacon interval + * @assoc_capability: capabbilities taken from assoc resp + * @assoc_ht: association in HT mode + * @ht_conf: ht capabilities + * @ht_bss_conf: ht extended capabilities */ struct ieee80211_bss_conf { /* association related data */ @@ -310,6 +219,69 @@ struct ieee80211_bss_conf { /* erp related data */ bool use_cts_prot; bool use_short_preamble; + u16 beacon_int; + u16 assoc_capability; + u64 timestamp; + /* ht related data */ + bool assoc_ht; + struct ieee80211_ht_info *ht_conf; + struct ieee80211_ht_bss_info *ht_bss_conf; +}; + +/** + * enum mac80211_tx_control_flags - flags to describe Tx configuration for + * the Tx frame + * + * These flags are used with the @flags member of &ieee80211_tx_control + * + * @IEEE80211_TXCTL_REQ_TX_STATUS: request TX status callback for this frame. + * @IEEE80211_TXCTL_DO_NOT_ENCRYPT: send this frame without encryption; + * e.g., for EAPOL frame + * @IEEE80211_TXCTL_USE_RTS_CTS: use RTS-CTS before sending frame + * @IEEE80211_TXCTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., + * for combined 802.11g / 802.11b networks) + * @IEEE80211_TXCTL_NO_ACK: tell the low level not to wait for an ack + * @IEEE80211_TXCTL_RATE_CTRL_PROBE + * @EEE80211_TXCTL_CLEAR_PS_FILT: clear powersave filter + * for destination station + * @IEEE80211_TXCTL_REQUEUE: + * @IEEE80211_TXCTL_FIRST_FRAGMENT: this is a first fragment of the frame + * @IEEE80211_TXCTL_LONG_RETRY_LIMIT: this frame should be send using the + * through set_retry_limit configured long + * retry value + * @IEEE80211_TXCTL_EAPOL_FRAME: internal to mac80211 + * @IEEE80211_TXCTL_SEND_AFTER_DTIM: send this frame after DTIM beacon + * @IEEE80211_TXCTL_AMPDU: this frame should be sent as part of an A-MPDU + * @IEEE80211_TXCTL_OFDM_HT: this frame can be sent in HT OFDM rates. number + * of streams when this flag is on can be extracted + * from antenna_sel_tx, so if 1 antenna is marked + * use SISO, 2 antennas marked use MIMO, n antennas + * marked use MIMO_n. + * @IEEE80211_TXCTL_GREEN_FIELD: use green field protection for this frame + * @IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width + * @IEEE80211_TXCTL_DUP_DATA: duplicate data frame on both 20 Mhz channels + * @IEEE80211_TXCTL_SHORT_GI: send this frame using short guard interval + */ +enum mac80211_tx_control_flags { + IEEE80211_TXCTL_REQ_TX_STATUS = (1<<0), + IEEE80211_TXCTL_DO_NOT_ENCRYPT = (1<<1), + IEEE80211_TXCTL_USE_RTS_CTS = (1<<2), + IEEE80211_TXCTL_USE_CTS_PROTECT = (1<<3), + IEEE80211_TXCTL_NO_ACK = (1<<4), + IEEE80211_TXCTL_RATE_CTRL_PROBE = (1<<5), + IEEE80211_TXCTL_CLEAR_PS_FILT = (1<<6), + IEEE80211_TXCTL_REQUEUE = (1<<7), + IEEE80211_TXCTL_FIRST_FRAGMENT = (1<<8), + IEEE80211_TXCTL_SHORT_PREAMBLE = (1<<9), + IEEE80211_TXCTL_LONG_RETRY_LIMIT = (1<<10), + IEEE80211_TXCTL_EAPOL_FRAME = (1<<11), + IEEE80211_TXCTL_SEND_AFTER_DTIM = (1<<12), + IEEE80211_TXCTL_AMPDU = (1<<13), + IEEE80211_TXCTL_OFDM_HT = (1<<14), + IEEE80211_TXCTL_GREEN_FIELD = (1<<15), + IEEE80211_TXCTL_40_MHZ_WIDTH = (1<<16), + IEEE80211_TXCTL_DUP_DATA = (1<<17), + IEEE80211_TXCTL_SHORT_GI = (1<<18), }; /* Transmit control fields. This data structure is passed to low-level driver @@ -318,57 +290,27 @@ struct ieee80211_bss_conf { struct ieee80211_tx_control { struct ieee80211_vif *vif; - int tx_rate; /* Transmit rate, given as the hw specific value for the - * rate (from struct ieee80211_rate) */ - int rts_cts_rate; /* Transmit rate for RTS/CTS frame, given as the hw - * specific value for the rate (from - * struct ieee80211_rate) */ - -#define IEEE80211_TXCTL_REQ_TX_STATUS (1<<0)/* request TX status callback for - * this frame */ -#define IEEE80211_TXCTL_DO_NOT_ENCRYPT (1<<1) /* send this frame without - * encryption; e.g., for EAPOL - * frames */ -#define IEEE80211_TXCTL_USE_RTS_CTS (1<<2) /* use RTS-CTS before sending - * frame */ -#define IEEE80211_TXCTL_USE_CTS_PROTECT (1<<3) /* use CTS protection for the - * frame (e.g., for combined - * 802.11g / 802.11b networks) */ -#define IEEE80211_TXCTL_NO_ACK (1<<4) /* tell the low level not to - * wait for an ack */ -#define IEEE80211_TXCTL_RATE_CTRL_PROBE (1<<5) -#define IEEE80211_TXCTL_CLEAR_DST_MASK (1<<6) -#define IEEE80211_TXCTL_REQUEUE (1<<7) -#define IEEE80211_TXCTL_FIRST_FRAGMENT (1<<8) /* this is a first fragment of - * the frame */ -#define IEEE80211_TXCTL_LONG_RETRY_LIMIT (1<<10) /* this frame should be send - * using the through - * set_retry_limit configured - * long retry value */ -#define IEEE80211_TXCTL_EAPOL_FRAME (1<<11) /* internal to mac80211 */ -#define IEEE80211_TXCTL_SEND_AFTER_DTIM (1<<12) /* send this frame after DTIM - * beacon */ - u32 flags; /* tx control flags defined - * above */ + struct ieee80211_rate *tx_rate; + + /* Transmit rate for RTS/CTS frame */ + struct ieee80211_rate *rts_cts_rate; + + /* retry rate for the last retries */ + struct ieee80211_rate *alt_retry_rate; + + u32 flags; /* tx control flags defined above */ u8 key_idx; /* keyidx from hw->set_key(), undefined if * IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ u8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. * This could be used when set_retry_limit * is not implemented by the driver */ - u8 power_level; /* per-packet transmit power level, in dBm */ - u8 antenna_sel_tx; /* 0 = default/diversity, 1 = Ant0, 2 = Ant1 */ + u8 antenna_sel_tx; /* 0 = default/diversity, otherwise bit + * position represents antenna number used */ u8 icv_len; /* length of the ICV/MIC field in octets */ u8 iv_len; /* length of the IV field in octets */ u8 queue; /* hardware queue to use for this frame; * 0 = highest, hw->queues-1 = lowest */ - struct ieee80211_rate *rate; /* internal 80211.o rate */ - struct ieee80211_rate *rts_rate; /* internal 80211.o rate - * for RTS/CTS */ - int alt_retry_rate; /* retry rate for the last retries, given as the - * hw specific value for the rate (from - * struct ieee80211_rate). To be used to limit - * packet dropping when probing higher rates, if hw - * supports multiple retry rates. -1 = not used */ + u16 aid; /* Station AID */ int type; /* internal */ }; @@ -391,7 +333,8 @@ struct ieee80211_tx_control { * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on * the frame. * @RX_FLAG_TSFT: The timestamp passed in the RX status (@mactime field) - * is valid. + * is valid. This is useful in monitor mode and necessary for beacon frames + * to enable IBSS merging. */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = 1<<0, @@ -410,27 +353,26 @@ enum mac80211_rx_flags { * The low-level driver should provide this information (the subset * supported by hardware) to the 802.11 code with each received * frame. - * @mactime: MAC timestamp as defined by 802.11 + * @mactime: value in microseconds of the 64-bit Time Synchronization Function + * (TSF) timer when the first data symbol (MPDU) arrived at the hardware. + * @band: the active band when this frame was received * @freq: frequency the radio was tuned to when receiving this frame, in MHz - * @channel: channel the radio was tuned to - * @phymode: active PHY mode * @ssi: signal strength when receiving this frame * @signal: used as 'qual' in statistics reporting * @noise: PHY noise when receiving this frame * @antenna: antenna used - * @rate: data rate + * @rate_idx: index of data rate into band's supported rates * @flag: %RX_FLAG_* */ struct ieee80211_rx_status { u64 mactime; + enum ieee80211_band band; int freq; - int channel; - enum ieee80211_phymode phymode; int ssi; int signal; int noise; int antenna; - int rate; + int rate_idx; int flag; }; @@ -441,12 +383,14 @@ struct ieee80211_rx_status { * * @IEEE80211_TX_STATUS_TX_FILTERED: The frame was not transmitted * because the destination STA was in powersave mode. - * * @IEEE80211_TX_STATUS_ACK: Frame was acknowledged + * @IEEE80211_TX_STATUS_AMPDU: The frame was aggregated, so status + * is for the whole aggregation. */ enum ieee80211_tx_status_flags { IEEE80211_TX_STATUS_TX_FILTERED = 1<<0, IEEE80211_TX_STATUS_ACK = 1<<1, + IEEE80211_TX_STATUS_AMPDU = 1<<2, }; /** @@ -457,24 +401,25 @@ enum ieee80211_tx_status_flags { * * @control: a copy of the &struct ieee80211_tx_control passed to the driver * in the tx() callback. - * * @flags: transmit status flags, defined above - * - * @ack_signal: signal strength of the ACK frame - * + * @retry_count: number of retries * @excessive_retries: set to 1 if the frame was retried many times * but not acknowledged - * - * @retry_count: number of retries - * + * @ampdu_ack_len: number of aggregated frames. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ampdu_ack_map: block ack bit map for the aggregation. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ack_signal: signal strength of the ACK frame * @queue_length: ?? REMOVE * @queue_number: ?? REMOVE */ struct ieee80211_tx_status { struct ieee80211_tx_control control; u8 flags; - bool excessive_retries; u8 retry_count; + bool excessive_retries; + u8 ampdu_ack_len; + u64 ampdu_ack_map; int ack_signal; int queue_length; int queue_number; @@ -502,41 +447,29 @@ enum ieee80211_conf_flags { * * @radio_enabled: when zero, driver is required to switch off the radio. * TODO make a flag - * @channel: IEEE 802.11 channel number - * @freq: frequency in MHz - * @channel_val: hardware specific channel value for the channel - * @phymode: PHY mode to activate (REMOVE) - * @chan: channel to switch to, pointer to the channel information - * @mode: pointer to mode definition - * @regulatory_domain: ?? * @beacon_int: beacon interval (TODO make interface config) * @flags: configuration flags defined above - * @power_level: transmit power limit for current regulatory domain in dBm - * @antenna_max: maximum antenna gain + * @power_level: requested transmit power (in dBm) + * @max_antenna_gain: maximum antenna gain (in dBi) * @antenna_sel_tx: transmit antenna selection, 0: default/diversity, * 1/2: antenna 0/1 * @antenna_sel_rx: receive antenna selection, like @antenna_sel_tx * @ht_conf: describes current self configuration of 802.11n HT capabilies * @ht_bss_conf: describes current BSS configuration of 802.11n HT parameters + * @channel: the channel to tune to */ struct ieee80211_conf { - int channel; /* IEEE 802.11 channel number */ - int freq; /* MHz */ - int channel_val; /* hw specific value for the channel */ - - enum ieee80211_phymode phymode; - struct ieee80211_channel *chan; - struct ieee80211_hw_mode *mode; - unsigned int regulatory_domain; int radio_enabled; int beacon_int; u32 flags; - u8 power_level; - u8 antenna_max; + int power_level; + int max_antenna_gain; u8 antenna_sel_tx; u8 antenna_sel_rx; + struct ieee80211_channel *channel; + struct ieee80211_ht_info ht_conf; struct ieee80211_ht_bss_info ht_bss_conf; }; @@ -555,12 +488,14 @@ struct ieee80211_conf { * @IEEE80211_IF_TYPE_WDS: interface in WDS mode. * @IEEE80211_IF_TYPE_VLAN: VLAN interface bound to an AP, drivers * will never see this type. + * @IEEE80211_IF_TYPE_MESH_POINT: 802.11s mesh point */ enum ieee80211_if_types { IEEE80211_IF_TYPE_INVALID, IEEE80211_IF_TYPE_AP, IEEE80211_IF_TYPE_STA, IEEE80211_IF_TYPE_IBSS, + IEEE80211_IF_TYPE_MESH_POINT, IEEE80211_IF_TYPE_MNTR, IEEE80211_IF_TYPE_WDS, IEEE80211_IF_TYPE_VLAN, @@ -582,6 +517,14 @@ struct ieee80211_vif { u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); }; +static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) +{ +#ifdef CONFIG_MAC80211_MESH + return vif->type == IEEE80211_IF_TYPE_MESH_POINT; +#endif + return false; +} + /** * struct ieee80211_if_init_conf - initial configuration of an interface * @@ -725,6 +668,21 @@ enum sta_notify_cmd { }; /** + * enum ieee80211_tkip_key_type - get tkip key + * + * Used by drivers which need to get a tkip key for skb. Some drivers need a + * phase 1 key, others need a phase 2 key. A single function allows the driver + * to get the key, this enum indicates what type of key is required. + * + * @IEEE80211_TKIP_P1_KEY: the driver needs a phase 1 key + * @IEEE80211_TKIP_P2_KEY: the driver needs a phase 2 key + */ +enum ieee80211_tkip_key_type { + IEEE80211_TKIP_P1_KEY, + IEEE80211_TKIP_P2_KEY, +}; + +/** * enum ieee80211_hw_flags - hardware flags * * These flags are used to indicate hardware capabilities to @@ -757,15 +715,19 @@ enum sta_notify_cmd { * %IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is also not set because * otherwise the stack will not know when the DTIM beacon was sent. * - * @IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED: - * Channels are already configured to the default regulatory domain - * specified in the device's EEPROM + * @IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE: + * Hardware is not capable of short slot operation on the 2.4 GHz band. + * + * @IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE: + * Hardware is not capable of receiving frames with short preamble on + * the 2.4 GHz band. */ enum ieee80211_hw_flags { IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0, IEEE80211_HW_RX_INCLUDES_FCS = 1<<1, IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2, - IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED = 1<<3, + IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3, + IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4, }; /** @@ -777,7 +739,8 @@ enum ieee80211_hw_flags { * @wiphy: This points to the &struct wiphy allocated for this * 802.11 PHY. You must fill in the @perm_addr and @dev * members of this structure using SET_IEEE80211_DEV() - * and SET_IEEE80211_PERM_ADDR(). + * and SET_IEEE80211_PERM_ADDR(). Additionally, all supported + * bands (with channels, bitrates) are registered here. * * @conf: &struct ieee80211_conf, device configuration, don't use. * @@ -888,6 +851,16 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) * parameter is guaranteed to be valid until another call to set_key() * removes it, but it can only be used as a cookie to differentiate * keys. + * + * In TKIP some HW need to be provided a phase 1 key, for RX decryption + * acceleration (i.e. iwlwifi). Those drivers should provide update_tkip_key + * handler. + * The update_tkip_key() call updates the driver with the new phase 1 key. + * This happens everytime the iv16 wraps around (every 65536 packets). The + * set_key() call will happen only once for each key (unless the AP did + * rekeying), it will not include a valid phase 1 key. The valid phase 1 key is + * provided by udpate_tkip_key only. The trigger that makes mac80211 call this + * handler is software decryption with wrap around of iv16. */ /** @@ -913,8 +886,18 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) * parameter to see whether multicast frames should be accepted * or dropped. * - * All unsupported flags in @total_flags must be cleared, i.e. you - * should clear all bits except those you honoured. + * All unsupported flags in @total_flags must be cleared. + * Hardware does not support a flag if it is incapable of _passing_ + * the frame to the stack. Otherwise the driver must ignore + * the flag, but not clear it. + * You must _only_ clear the flag (announce no support for the + * flag to mac80211) if you are not able to pass the packet type + * to the stack (so the hardware always filters it). + * So for example, you should clear @FIF_CONTROL, if your hardware + * always filters control frames. If your hardware always passes + * control frames to the kernel and is incapable of filtering them, + * you do _not_ clear the @FIF_CONTROL flag. + * This rule applies to all other FIF flags as well. */ /** @@ -967,10 +950,14 @@ enum ieee80211_filter_flags { * &struct ieee80211_ops to indicate which action is needed. * @IEEE80211_AMPDU_RX_START: start Rx aggregation * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation + * @IEEE80211_AMPDU_TX_START: start Tx aggregation + * @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation */ enum ieee80211_ampdu_mlme_action { IEEE80211_AMPDU_RX_START, IEEE80211_AMPDU_RX_STOP, + IEEE80211_AMPDU_TX_START, + IEEE80211_AMPDU_TX_STOP, }; /** @@ -1033,8 +1020,7 @@ enum ieee80211_ampdu_mlme_action { * level driver (e.g. assoc/disassoc status, erp parameters). * This function should not be used if no BSS has been set, unless * for association indication. The @changed parameter indicates which - * of the bss parameters has changed when a call is made. This callback - * has to be atomic. + * of the bss parameters has changed when a call is made. * * @configure_filter: Configure the device's RX filter. * See the section "Frame filtering" for more information. @@ -1050,8 +1036,14 @@ enum ieee80211_ampdu_mlme_action { * and remove_interface calls, i.e. while the interface with the * given local_address is enabled. * + * @update_tkip_key: See the section "Hardware crypto acceleration" + * This callback will be called in the context of Rx. Called for drivers + * which set IEEE80211_KEY_FLAG_TKIP_REQ_RX_P1_KEY. + * * @hw_scan: Ask the hardware to service the scan request, no need to start - * the scan state machine in stack. + * the scan state machine in stack. The scan must honour the channel + * configuration done by the regulatory agent in the wiphy's registered + * bands. * * @get_stats: return low-level statistics * @@ -1111,7 +1103,8 @@ enum ieee80211_ampdu_mlme_action { * The RA/TID combination determines the destination and TID we want * the ampdu action to be performed for. The action is defined through * ieee80211_ampdu_mlme_action. Starting sequence number (@ssn) - * is the first frame we expect to perform the action on. + * is the first frame we expect to perform the action on. notice + * that TX/RX_STOP can pass NULL for this parameter. */ struct ieee80211_ops { int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb, @@ -1138,6 +1131,9 @@ struct ieee80211_ops { int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd, const u8 *local_address, const u8 *address, struct ieee80211_key_conf *key); + void (*update_tkip_key)(struct ieee80211_hw *hw, + struct ieee80211_key_conf *conf, const u8 *address, + u32 iv32, u16 *phase1key); int (*hw_scan)(struct ieee80211_hw *hw, u8 *ssid, size_t len); int (*get_stats)(struct ieee80211_hw *hw, struct ieee80211_low_level_stats *stats); @@ -1159,10 +1155,9 @@ struct ieee80211_ops { struct sk_buff *skb, struct ieee80211_tx_control *control); int (*tx_last_beacon)(struct ieee80211_hw *hw); - int (*conf_ht)(struct ieee80211_hw *hw, struct ieee80211_conf *conf); int (*ampdu_action)(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, - const u8 *ra, u16 tid, u16 ssn); + const u8 *addr, u16 tid, u16 *ssn); }; /** @@ -1183,8 +1178,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, /** * ieee80211_register_hw - Register hardware device * - * You must call this function before any other functions - * except ieee80211_register_hwmode. + * You must call this function before any other functions in + * mac80211. Note that before a hardware can be registered, you + * need to fill the contained wiphy's information. * * @hw: the device to register as returned by ieee80211_alloc_hw() */ @@ -1272,10 +1268,6 @@ static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw) #endif } -/* Register a new hardware PHYMODE capability to the stack. */ -int ieee80211_register_hwmode(struct ieee80211_hw *hw, - struct ieee80211_hw_mode *mode); - /** * ieee80211_unregister_hw - Unregister a hardware device * @@ -1308,7 +1300,10 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, * buffer in @skb must start with an IEEE 802.11 header or a radiotap * header if %RX_FLAG_RADIOTAP is set in the @status flags. * - * This function may not be called in IRQ context. + * This function may not be called in IRQ context. Calls to this function + * for a single hardware must be synchronized against each other. Calls + * to this function and ieee80211_rx_irqsafe() may not be mixed for a + * single hardware. * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -1325,7 +1320,10 @@ static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, * ieee80211_rx_irqsafe - receive frame * * Like ieee80211_rx() but can be called in IRQ context - * (internally defers to a workqueue.) + * (internally defers to a tasklet.) + * + * Calls to this function and ieee80211_rx() may not be mixed for a + * single hardware. * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call @@ -1344,6 +1342,11 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, * transmitted. It is permissible to not call this function for * multicast frames but this can affect statistics. * + * This function may not be called in IRQ context. Calls to this function + * for a single hardware must be synchronized against each other. Calls + * to this function and ieee80211_tx_status_irqsafe() may not be mixed + * for a single hardware. + * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call * @status: status information for this frame; the status pointer need not @@ -1353,6 +1356,22 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_tx_status *status); + +/** + * ieee80211_tx_status_irqsafe - irq-safe transmit status callback + * + * Like ieee80211_tx_status() but can be called in IRQ context + * (internally defers to a tasklet.) + * + * Calls to this function and ieee80211_tx_status() may not be mixed for a + * single hardware. + * + * @hw: the hardware the frame was transmitted by + * @skb: the frame that was transmitted, owned by mac80211 after this call + * @status: status information for this frame; the status pointer need not + * be valid after this function returns and is not freed by mac80211, + * it is recommended that it points to a stack area + */ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_tx_status *status); @@ -1449,7 +1468,7 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame. - * @rate: the rate (in 100kbps) at which the frame is going to be transmitted. + * @rate: the rate at which the frame is going to be transmitted. * * Calculate the duration field of some generic frame, given its * length and transmission rate (in 100kbps). @@ -1457,7 +1476,7 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, size_t frame_len, - int rate); + struct ieee80211_rate *rate); /** * ieee80211_get_buffered_bc - accessing buffered broadcast and multicast frames @@ -1507,6 +1526,21 @@ int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); int ieee80211_get_hdrlen(u16 fc); /** + * ieee80211_get_tkip_key - get a TKIP rc4 for skb + * + * This function computes a TKIP rc4 key for an skb. It computes + * a phase 1 key if needed (iv16 wraps around). This function is to + * be used by drivers which can do HW encryption but need to compute + * to phase 1/2 key in SW. + * + * @keyconf: the parameter passed with the set key + * @skb: the skb for which the key is needed + * @rc4key: a buffer to which the key will be written + */ +void ieee80211_get_tkip_key(struct ieee80211_key_conf *keyconf, + struct sk_buff *skb, + enum ieee80211_tkip_key_type type, u8 *key); +/** * ieee80211_wake_queue - wake specific queue * @hw: pointer as obtained from ieee80211_alloc_hw(). * @queue: queue number (counted from zero). @@ -1574,4 +1608,92 @@ void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw, struct ieee80211_vif *vif), void *data); +/** + * ieee80211_start_tx_ba_session - Start a tx Block Ack session. + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @ra: receiver address of the BA session recipient + * @tid: the TID to BA on. + * @return: success if addBA request was sent, failure otherwise + * + * Although mac80211/low level driver/user space application can estimate + * the need to start aggregation on a certain RA/TID, the session level + * will be managed by the mac80211. + */ +int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid); + +/** + * ieee80211_start_tx_ba_cb - low level driver ready to aggregate. + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @ra: receiver address of the BA session recipient. + * @tid: the TID to BA on. + * + * This function must be called by low level driver once it has + * finished with preparations for the BA session. + */ +void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid); + +/** + * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate. + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @ra: receiver address of the BA session recipient. + * @tid: the TID to BA on. + * + * This function must be called by low level driver once it has + * finished with preparations for the BA session. + * This version of the function is irq safe. + */ +void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, + u16 tid); + +/** + * ieee80211_stop_tx_ba_session - Stop a Block Ack session. + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @ra: receiver address of the BA session recipient + * @tid: the TID to stop BA. + * @initiator: if indicates initiator DELBA frame will be sent. + * @return: error if no sta with matching da found, success otherwise + * + * Although mac80211/low level driver/user space application can estimate + * the need to stop aggregation on a certain RA/TID, the session level + * will be managed by the mac80211. + */ +int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw, + u8 *ra, u16 tid, + enum ieee80211_back_parties initiator); + +/** + * ieee80211_stop_tx_ba_cb - low level driver ready to stop aggregate. + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @ra: receiver address of the BA session recipient. + * @tid: the desired TID to BA on. + * + * This function must be called by low level driver once it has + * finished with preparations for the BA session tear down. + */ +void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid); + +/** + * ieee80211_stop_tx_ba_cb_irqsafe - low level driver ready to stop aggregate. + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @ra: receiver address of the BA session recipient. + * @tid: the desired TID to BA on. + * + * This function must be called by low level driver once it has + * finished with preparations for the BA session tear down. + * This version of the function is irq safe. + */ +void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, + u16 tid); + +/** + * ieee80211_notify_mac - low level driver notification + * @hw: pointer as obtained from ieee80211_alloc_hw(). + * @notification_types: enum ieee80211_notification_types + * + * This function must be called by low level driver to inform mac80211 of + * low level driver status change or force mac80211 to re-assoc for low + * level driver internal error that require re-assoc. + */ +void ieee80211_notify_mac(struct ieee80211_hw *hw, + enum ieee80211_notification_types notif_type); #endif /* MAC80211_H */ |