diff options
Diffstat (limited to 'include/net')
| -rw-r--r-- | include/net/cfg80211.h | 478 | ||||
| -rw-r--r-- | include/net/genetlink.h | 66 | ||||
| -rw-r--r-- | include/net/ipv6.h | 12 | ||||
| -rw-r--r-- | include/net/iw_handler.h | 2 | ||||
| -rw-r--r-- | include/net/mac80211.h | 71 | ||||
| -rw-r--r-- | include/net/net_namespace.h | 26 | ||||
| -rw-r--r-- | include/net/netfilter/nf_conntrack.h | 4 | ||||
| -rw-r--r-- | include/net/netns/x_tables.h | 3 | ||||
| -rw-r--r-- | include/net/phonet/pn_dev.h | 3 | ||||
| -rw-r--r-- | include/net/scm.h | 2 | ||||
| -rw-r--r-- | include/net/sock.h | 101 | ||||
| -rw-r--r-- | include/net/tcp.h | 5 | ||||
| -rw-r--r-- | include/net/udp.h | 3 |
13 files changed, 646 insertions, 130 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1a21895b732..a981ca8a570 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -538,7 +538,7 @@ struct cfg80211_ssid { * @ssids: SSIDs to scan for (active scan only) * @n_ssids: number of SSIDs * @channels: channels to scan on. - * @n_channels: number of channels for each band + * @n_channels: total number of channels to scan * @ie: optional information element(s) to add into Probe Request or %NULL * @ie_len: length of ie in octets * @wiphy: the wiphy this was for @@ -555,6 +555,7 @@ struct cfg80211_scan_request { /* internal */ struct wiphy *wiphy; int ifidx; + bool aborted; }; /** @@ -584,7 +585,6 @@ enum cfg80211_signal_type { * is no guarantee that these are well-formed!) * @len_information_elements: total length of the information elements * @signal: signal strength value (type depends on the wiphy's signal_type) - * @hold: BSS should not expire * @free_priv: function pointer to free private data * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ @@ -605,37 +605,59 @@ struct cfg80211_bss { }; /** + * ieee80211_bss_get_ie - find IE with given ID + * @bss: the bss to search + * @ie: the IE ID + * Returns %NULL if not found. + */ +const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); + + +/** + * struct cfg80211_crypto_settings - Crypto settings + * @wpa_versions: indicates which, if any, WPA versions are enabled + * (from enum nl80211_wpa_versions) + * @cipher_group: group key cipher suite (or 0 if unset) + * @n_ciphers_pairwise: number of AP supported unicast ciphers + * @ciphers_pairwise: unicast key cipher suites + * @n_akm_suites: number of AKM suites + * @akm_suites: AKM suites + * @control_port: Whether user space controls IEEE 802.1X port, i.e., + * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is + * required to assume that the port is unauthorized until authorized by + * user space. Otherwise, port is marked authorized by default. + */ +struct cfg80211_crypto_settings { + u32 wpa_versions; + u32 cipher_group; + int n_ciphers_pairwise; + u32 ciphers_pairwise[NL80211_MAX_NR_CIPHER_SUITES]; + int n_akm_suites; + u32 akm_suites[NL80211_MAX_NR_AKM_SUITES]; + bool control_port; +}; + +/** * struct cfg80211_auth_request - Authentication request data * * This structure provides information needed to complete IEEE 802.11 * authentication. - * NOTE: This structure will likely change when more code from mac80211 is - * moved into cfg80211 so that non-mac80211 drivers can benefit from it, too. - * Before using this in a driver that does not use mac80211, it would be better - * to check the status of that work and better yet, volunteer to work on it. - * - * @chan: The channel to use or %NULL if not specified (auto-select based on - * scan results) - * @peer_addr: The address of the peer STA (AP BSSID in infrastructure case); - * this field is required to be present; if the driver wants to help with - * BSS selection, it should use (yet to be added) MLME event to allow user - * space SME to be notified of roaming candidate, so that the SME can then - * use the authentication request with the recommended BSSID and whatever - * other data may be needed for authentication/association - * @ssid: SSID or %NULL if not yet available - * @ssid_len: Length of ssid in octets + * + * @bss: The BSS to authenticate with. * @auth_type: Authentication type (algorithm) * @ie: Extra IEs to add to Authentication frame or %NULL * @ie_len: Length of ie buffer in octets + * @key_len: length of WEP key for shared key authentication + * @key_idx: index of WEP key for shared key authentication + * @key: WEP key for shared key authentication */ struct cfg80211_auth_request { - struct ieee80211_channel *chan; - u8 *peer_addr; - const u8 *ssid; - size_t ssid_len; - enum nl80211_auth_type auth_type; + struct cfg80211_bss *bss; const u8 *ie; size_t ie_len; + enum nl80211_auth_type auth_type; + const u8 *key; + u8 key_len, key_idx; }; /** @@ -643,35 +665,19 @@ struct cfg80211_auth_request { * * This structure provides information needed to complete IEEE 802.11 * (re)association. - * NOTE: This structure will likely change when more code from mac80211 is - * moved into cfg80211 so that non-mac80211 drivers can benefit from it, too. - * Before using this in a driver that does not use mac80211, it would be better - * to check the status of that work and better yet, volunteer to work on it. - * - * @chan: The channel to use or %NULL if not specified (auto-select based on - * scan results) - * @peer_addr: The address of the peer STA (AP BSSID); this field is required - * to be present and the STA must be in State 2 (authenticated) with the - * peer STA - * @ssid: SSID - * @ssid_len: Length of ssid in octets + * @bss: The BSS to associate with. * @ie: Extra IEs to add to (Re)Association Request frame or %NULL * @ie_len: Length of ie buffer in octets * @use_mfp: Use management frame protection (IEEE 802.11w) in this association - * @control_port: Whether user space controls IEEE 802.1X port, i.e., - * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is - * required to assume that the port is unauthorized until authorized by - * user space. Otherwise, port is marked authorized by default. + * @crypto: crypto settings + * @prev_bssid: previous BSSID, if not %NULL use reassociate frame */ struct cfg80211_assoc_request { - struct ieee80211_channel *chan; - u8 *peer_addr; - const u8 *ssid; - size_t ssid_len; - const u8 *ie; + struct cfg80211_bss *bss; + const u8 *ie, *prev_bssid; size_t ie_len; + struct cfg80211_crypto_settings crypto; bool use_mfp; - bool control_port; }; /** @@ -680,16 +686,16 @@ struct cfg80211_assoc_request { * This structure provides information needed to complete IEEE 802.11 * deauthentication. * - * @peer_addr: The address of the peer STA (AP BSSID); this field is required - * to be present and the STA must be authenticated with the peer STA + * @bss: the BSS to deauthenticate from * @ie: Extra IEs to add to Deauthentication frame or %NULL * @ie_len: Length of ie buffer in octets + * @reason_code: The reason code for the deauthentication */ struct cfg80211_deauth_request { - u8 *peer_addr; - u16 reason_code; + struct cfg80211_bss *bss; const u8 *ie; size_t ie_len; + u16 reason_code; }; /** @@ -698,16 +704,16 @@ struct cfg80211_deauth_request { * This structure provides information needed to complete IEEE 802.11 * disassocation. * - * @peer_addr: The address of the peer STA (AP BSSID); this field is required - * to be present and the STA must be associated with the peer STA + * @bss: the BSS to disassociate from * @ie: Extra IEs to add to Disassociation frame or %NULL * @ie_len: Length of ie buffer in octets + * @reason_code: The reason code for the disassociation */ struct cfg80211_disassoc_request { - u8 *peer_addr; - u16 reason_code; + struct cfg80211_bss *bss; const u8 *ie; size_t ie_len; + u16 reason_code; }; /** @@ -726,6 +732,8 @@ struct cfg80211_disassoc_request { * @ie: information element(s) to include in the beacon * @ie_len: length of that * @beacon_interval: beacon interval to use + * @privacy: this is a protected network, keys will be configured + * after joining */ struct cfg80211_ibss_params { u8 *ssid; @@ -735,6 +743,42 @@ struct cfg80211_ibss_params { u8 ssid_len, ie_len; u16 beacon_interval; bool channel_fixed; + bool privacy; +}; + +/** + * struct cfg80211_connect_params - Connection parameters + * + * This structure provides information needed to complete IEEE 802.11 + * authentication and association. + * + * @channel: The channel to use or %NULL if not specified (auto-select based + * on scan results) + * @bssid: The AP BSSID or %NULL if not specified (auto-select based on scan + * results) + * @ssid: SSID + * @ssid_len: Length of ssid in octets + * @auth_type: Authentication type (algorithm) + * @assoc_ie: IEs for association request + * @assoc_ie_len: Length of assoc_ie in octets + * @privacy: indicates whether privacy-enabled APs should be used + * @crypto: crypto settings + * @key_len: length of WEP key for shared key authentication + * @key_idx: index of WEP key for shared key authentication + * @key: WEP key for shared key authentication + */ +struct cfg80211_connect_params { + struct ieee80211_channel *channel; + u8 *bssid; + u8 *ssid; + size_t ssid_len; + enum nl80211_auth_type auth_type; + u8 *ie; + size_t ie_len; + bool privacy; + struct cfg80211_crypto_settings crypto; + const u8 *key; + u8 key_len, key_idx; }; /** @@ -764,6 +808,26 @@ enum tx_power_setting { TX_POWER_FIXED, }; +/* + * cfg80211_bitrate_mask - masks for bitrate control + */ +struct cfg80211_bitrate_mask { +/* + * As discussed in Berlin, this struct really + * should look like this: + + struct { + u32 legacy; + u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; + } control[IEEE80211_NUM_BANDS]; + + * Since we can always fix in-kernel users, let's keep + * it simpler for now: + */ + u32 fixed; /* fixed bitrate, 0 == not fixed */ + u32 maxrate; /* in kbps, 0 == no limit */ +}; + /** * struct cfg80211_ops - backend description for wireless configuration * @@ -841,6 +905,12 @@ enum tx_power_setting { * @deauth: Request to deauthenticate from the specified peer * @disassoc: Request to disassociate from the specified peer * + * @connect: Connect to the ESS with the specified parameters. When connected, + * call cfg80211_connect_result() with status code %WLAN_STATUS_SUCCESS. + * If the connection fails for some reason, call cfg80211_connect_result() + * with the status from the AP. + * @disconnect: Disconnect from the BSS/ESS. + * * @join_ibss: Join the specified IBSS (or create if necessary). Once done, call * cfg80211_ibss_joined(), also call that function when changing BSSID due * to a merge. @@ -857,6 +927,8 @@ enum tx_power_setting { * * @rfkill_poll: polls the hw rfkill line, use cfg80211 reporting * functions to adjust rfkill hw state + * + * @testmode_cmd: run a test mode command */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy); @@ -866,7 +938,8 @@ struct cfg80211_ops { enum nl80211_iftype type, u32 *flags, struct vif_params *params); int (*del_virtual_intf)(struct wiphy *wiphy, int ifindex); - int (*change_virtual_intf)(struct wiphy *wiphy, int ifindex, + int (*change_virtual_intf)(struct wiphy *wiphy, + struct net_device *dev, enum nl80211_iftype type, u32 *flags, struct vif_params *params); @@ -939,9 +1012,16 @@ struct cfg80211_ops { int (*assoc)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_assoc_request *req); int (*deauth)(struct wiphy *wiphy, struct net_device *dev, - struct cfg80211_deauth_request *req); + struct cfg80211_deauth_request *req, + void *cookie); int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, - struct cfg80211_disassoc_request *req); + struct cfg80211_disassoc_request *req, + void *cookie); + + int (*connect)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_connect_params *sme); + int (*disconnect)(struct wiphy *wiphy, struct net_device *dev, + u16 reason_code); int (*join_ibss)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_ibss_params *params); @@ -953,7 +1033,23 @@ struct cfg80211_ops { enum tx_power_setting type, int dbm); int (*get_tx_power)(struct wiphy *wiphy, int *dbm); + int (*set_wds_peer)(struct wiphy *wiphy, struct net_device *dev, + u8 *addr); + void (*rfkill_poll)(struct wiphy *wiphy); + +#ifdef CONFIG_NL80211_TESTMODE + int (*testmode_cmd)(struct wiphy *wiphy, void *data, int len); +#endif + + int (*set_bitrate_mask)(struct wiphy *wiphy, + struct net_device *dev, + const u8 *peer, + const struct cfg80211_bitrate_mask *mask); + + /* some temporary stuff to finish wext */ + int (*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev, + bool enabled, int timeout); }; /* @@ -1058,6 +1154,17 @@ static inline void *wiphy_priv(struct wiphy *wiphy) } /** + * priv_to_wiphy - return the wiphy containing the priv + * + * @priv: a pointer previously returned by wiphy_priv + */ +static inline struct wiphy *priv_to_wiphy(void *priv) +{ + BUG_ON(!priv); + return container_of(priv, struct wiphy, priv); +} + +/** * set_wiphy_dev - set device pointer for wiphy * * @wiphy: The wiphy whose device to bind @@ -1129,6 +1236,13 @@ extern void wiphy_unregister(struct wiphy *wiphy); */ extern void wiphy_free(struct wiphy *wiphy); +/* internal structs */ +struct cfg80211_conn; +struct cfg80211_internal_bss; +struct cfg80211_cached_keys; + +#define MAX_AUTH_BSSES 4 + /** * struct wireless_dev - wireless per-netdev state * @@ -1152,22 +1266,43 @@ struct wireless_dev { struct wiphy *wiphy; enum nl80211_iftype iftype; - /* private to the generic wireless code */ + /* the remainder of this struct should be private to cfg80211 */ struct list_head list; struct net_device *netdev; - /* currently used for IBSS - might be rearranged in the future */ - struct cfg80211_bss *current_bss; - u8 bssid[ETH_ALEN]; + struct mutex mtx; + + /* currently used for IBSS and SME - might be rearranged later */ u8 ssid[IEEE80211_MAX_SSID_LEN]; u8 ssid_len; + enum { + CFG80211_SME_IDLE, + CFG80211_SME_CONNECTING, + CFG80211_SME_CONNECTED, + } sme_state; + struct cfg80211_conn *conn; + struct cfg80211_cached_keys *connect_keys; + + struct list_head event_list; + spinlock_t event_lock; + + struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES]; + struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES]; + struct cfg80211_internal_bss *current_bss; /* associated / joined */ #ifdef CONFIG_WIRELESS_EXT /* wext data */ struct { struct cfg80211_ibss_params ibss; + struct cfg80211_connect_params connect; + struct cfg80211_cached_keys *keys; + u8 *ie; + size_t ie_len; u8 bssid[ETH_ALEN]; + u8 ssid[IEEE80211_MAX_SSID_LEN]; s8 default_key, default_mgmt_key; + bool ps; + int ps_timeout; } wext; #endif }; @@ -1447,9 +1582,44 @@ int cfg80211_ibss_wext_giwap(struct net_device *dev, struct iw_request_info *info, struct sockaddr *ap_addr, char *extra); +int cfg80211_mgd_wext_siwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra); +int cfg80211_mgd_wext_giwfreq(struct net_device *dev, + struct iw_request_info *info, + struct iw_freq *freq, char *extra); +int cfg80211_mgd_wext_siwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *ssid); +int cfg80211_mgd_wext_giwessid(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *ssid); +int cfg80211_mgd_wext_siwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra); +int cfg80211_mgd_wext_giwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *ap_addr, char *extra); +int cfg80211_wext_siwgenie(struct net_device *dev, + struct iw_request_info *info, + struct iw_point *data, char *extra); +int cfg80211_wext_siwauth(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *data, char *extra); +int cfg80211_wext_giwauth(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *data, char *extra); + struct ieee80211_channel *cfg80211_wext_freq(struct wiphy *wiphy, struct iw_freq *freq); +int cfg80211_wext_siwrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rate, char *extra); +int cfg80211_wext_giwrate(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *rate, char *extra); + int cfg80211_wext_siwrts(struct net_device *dev, struct iw_request_info *info, struct iw_param *rts, char *extra); @@ -1483,6 +1653,21 @@ int cfg80211_wext_siwtxpower(struct net_device *dev, int cfg80211_wext_giwtxpower(struct net_device *dev, struct iw_request_info *info, union iwreq_data *data, char *keybuf); +struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev); + +int cfg80211_wext_siwpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *wrq, char *extra); +int cfg80211_wext_giwpower(struct net_device *dev, + struct iw_request_info *info, + struct iw_param *wrq, char *extra); + +int cfg80211_wds_wext_siwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *addr, char *extra); +int cfg80211_wds_wext_giwap(struct net_device *dev, + struct iw_request_info *info, + struct sockaddr *addr, char *extra); /* * callbacks for asynchronous cfg80211 methods, notification @@ -1564,7 +1749,7 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); * This function is called whenever an authentication has been processed in * station mode. The driver is required to call either this function or * cfg80211_send_auth_timeout() to indicate the result of cfg80211_ops::auth() - * call. + * call. This function may sleep. */ void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); @@ -1572,6 +1757,8 @@ void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); * cfg80211_send_auth_timeout - notification of timed out authentication * @dev: network device * @addr: The MAC address of the device with which the authentication timed out + * + * This function may sleep. */ void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); @@ -1584,7 +1771,7 @@ void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); * This function is called whenever a (re)association response has been * processed in station mode. The driver is required to call either this * function or cfg80211_send_assoc_timeout() to indicate the result of - * cfg80211_ops::assoc() call. + * cfg80211_ops::assoc() call. This function may sleep. */ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len); @@ -1592,6 +1779,8 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len); * cfg80211_send_assoc_timeout - notification of timed out association * @dev: network device * @addr: The MAC address of the device with which the association timed out + * + * This function may sleep. */ void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr); @@ -1600,41 +1789,30 @@ void cfg80211_send_assoc_timeout(struct net_device *dev, const u8 *addr); * @dev: network device * @buf: deauthentication frame (header + body) * @len: length of the frame data + * @cookie: cookie from ->deauth if called within that callback, + * %NULL otherwise * * This function is called whenever deauthentication has been processed in * station mode. This includes both received deauthentication frames and - * locally generated ones. + * locally generated ones. This function may sleep. */ -void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len); +void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len, + void *cookie); /** * cfg80211_send_disassoc - notification of processed disassociation * @dev: network device * @buf: disassociation response frame (header + body) * @len: length of the frame data + * @cookie: cookie from ->disassoc if called within that callback, + * %NULL otherwise * * This function is called whenever disassociation has been processed in * station mode. This includes both received disassociation frames and locally - * generated ones. + * generated ones. This function may sleep. */ -void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len); - -/** - * cfg80211_hold_bss - exclude bss from expiration - * @bss: bss which should not expire - * - * In a case when the BSS is not updated but it shouldn't expire this - * function can be used to mark the BSS to be excluded from expiration. - */ -void cfg80211_hold_bss(struct cfg80211_bss *bss); - -/** - * cfg80211_unhold_bss - remove expiration exception from the BSS - * @bss: bss which can expire again - * - * This function marks the BSS to be expirable again. - */ -void cfg80211_unhold_bss(struct cfg80211_bss *bss); +void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len, + void *cookie); /** * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP) @@ -1643,6 +1821,7 @@ void cfg80211_unhold_bss(struct cfg80211_bss *bss); * @key_type: The key type that the received frame used * @key_id: Key identifier (0..3) * @tsc: The TSC value of the frame that generated the MIC failure (6 octets) + * @gfp: allocation flags * * This function is called whenever the local MAC detects a MIC failure in a * received frame. This matches with MLME-MICHAELMICFAILURE.indication() @@ -1650,7 +1829,7 @@ void cfg80211_unhold_bss(struct cfg80211_bss *bss); */ void cfg80211_michael_mic_failure(struct net_device *dev, const u8 *addr, enum nl80211_key_type key_type, int key_id, - const u8 *tsc); + const u8 *tsc, gfp_t gfp); /** * cfg80211_ibss_joined - notify cfg80211 that device joined an IBSS @@ -1687,4 +1866,137 @@ void wiphy_rfkill_start_polling(struct wiphy *wiphy); */ void wiphy_rfkill_stop_polling(struct wiphy *wiphy); +#ifdef CONFIG_NL80211_TESTMODE +/** + * cfg80211_testmode_alloc_reply_skb - allocate testmode reply + * @wiphy: the wiphy + * @approxlen: an upper bound of the length of the data that will + * be put into the skb + * + * This function allocates and pre-fills an skb for a reply to + * the testmode command. Since it is intended for a reply, calling + * it outside of the @testmode_cmd operation is invalid. + * + * The returned skb (or %NULL if any errors happen) is pre-filled + * with the wiphy index and set up in a way that any data that is + * put into the skb (with skb_put(), nla_put() or similar) will end + * up being within the %NL80211_ATTR_TESTDATA attribute, so all that + * needs to be done with the skb is adding data for the corresponding + * userspace tool which can then read that data out of the testdata + * attribute. You must not modify the skb in any other way. + * + * When done, call cfg80211_testmode_reply() with the skb and return + * its error code as the result of the @testmode_cmd operation. + */ +struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, + int approxlen); + +/** + * cfg80211_testmode_reply - send the reply skb + * @skb: The skb, must have been allocated with + * cfg80211_testmode_alloc_reply_skb() + * + * Returns an error code or 0 on success, since calling this + * function will usually be the last thing before returning + * from the @testmode_cmd you should return the error code. + * Note that this function consumes the skb regardless of the + * return value. + */ +int cfg80211_testmode_reply(struct sk_buff *skb); + +/** + * cfg80211_testmode_alloc_event_skb - allocate testmode event + * @wiphy: the wiphy + * @approxlen: an upper bound of the length of the data that will + * be put into the skb + * @gfp: allocation flags + * + * This function allocates and pre-fills an skb for an event on the + * testmode multicast group. + * + * The returned skb (or %NULL if any errors happen) is set up in the + * same way as with cfg80211_testmode_alloc_reply_skb() but prepared + * for an event. As there, you should simply add data to it that will + * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must + * not modify the skb in any other way. + * + * When done filling the skb, call cfg80211_testmode_event() with the + * skb to send the event. + */ +struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, + int approxlen, gfp_t gfp); + +/** + * cfg80211_testmode_event - send the event + * @skb: The skb, must have been allocated with + * cfg80211_testmode_alloc_event_skb() + * @gfp: allocation flags + * + * This function sends the given @skb, which must have been allocated + * by cfg80211_testmode_alloc_event_skb(), as an event. It always + * consumes it. + */ +void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp); + +#define CFG80211_TESTMODE_CMD(cmd) .testmode_cmd = (cmd), +#else +#define CFG80211_TESTMODE_CMD(cmd) +#endif + +/** + * cfg80211_connect_result - notify cfg80211 of connection result + * + * @dev: network device + * @bssid: the BSSID of the AP + * @req_ie: association request IEs (maybe be %NULL) + * @req_ie_len: association request IEs length + * @resp_ie: association response IEs (may be %NULL) + * @resp_ie_len: assoc response IEs length + * @status: status code, 0 for successful connection, use + * %WLAN_STATUS_UNSPECIFIED_FAILURE if your device cannot give you + * the real status code for failures. + * @gfp: allocation flags + * + * It should be called by the underlying driver whenever connect() has + * succeeded. + */ +void cfg80211_connect_result(struct net_device *dev, const u8 *bssid, + const u8 *req_ie, size_t req_ie_len, + const u8 *resp_ie, size_t resp_ie_len, + u16 status, gfp_t gfp); + +/** + * cfg80211_roamed - notify cfg80211 of roaming + * + * @dev: network device + * @bssid: the BSSID of the new AP + * @req_ie: association request IEs (maybe be %NULL) + * @req_ie_len: association request IEs length + * @resp_ie: association response IEs (may be %NULL) + * @resp_ie_len: assoc response IEs length + * @gfp: allocation flags + * + * It should be called by the underlying driver whenever it roamed + * from one AP to another while connected. + */ +void cfg80211_roamed(struct net_device *dev, const u8 *bssid, + const u8 *req_ie, size_t req_ie_len, + const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp); + +/** + * cfg80211_disconnected - notify cfg80211 that connection was dropped + * + * @dev: network device + * @ie: information elements of the deauth/disassoc frame (may be %NULL) + * @ie_len: length of IEs + * @reason: reason code for the disconnection, set it to 0 if unknown + * @gfp: allocation flags + * + * After it calls this function, the driver should enter an idle state + * and not try to connect to any AP any more. + */ +void cfg80211_disconnected(struct net_device *dev, u16 reason, + u8 *ie, size_t ie_len, gfp_t gfp); + + #endif /* __NET_CFG80211_H */ diff --git a/include/net/genetlink.h b/include/net/genetlink.h index 1b0e3ee4ddd..2a1c06874c4 100644 --- a/include/net/genetlink.h +++ b/include/net/genetlink.h @@ -3,6 +3,7 @@ #include <linux/genetlink.h> #include <net/netlink.h> +#include <net/net_namespace.h> /** * struct genl_multicast_group - generic netlink multicast group @@ -27,6 +28,8 @@ struct genl_multicast_group * @name: name of family * @version: protocol version * @maxattr: maximum number of attributes supported + * @netnsok: set to true if the family can handle network + * namespaces and should be presented in all of them * @attrbuf: buffer to store parsed attributes * @ops_list: list of all assigned operations * @family_list: family list @@ -39,6 +42,7 @@ struct genl_family char name[GENL_NAMSIZ]; unsigned int version; unsigned int maxattr; + bool netnsok; struct nlattr ** attrbuf; /* private */ struct list_head ops_list; /* private */ struct list_head family_list; /* private */ @@ -62,8 +66,32 @@ struct genl_info struct genlmsghdr * genlhdr; void * userhdr; struct nlattr ** attrs; +#ifdef CONFIG_NET_NS + struct net * _net; +#endif }; +#ifdef CONFIG_NET_NS +static inline struct net *genl_info_net(struct genl_info *info) +{ + return info->_net; +} + +static inline void genl_info_net_set(struct genl_info *info, struct net *net) +{ + info->_net = net; +} +#else +static inline struct net *genl_info_net(struct genl_info *info) +{ + return &init_net; +} + +static inline void genl_info_net_set(struct genl_info *info, struct net *net) +{ +} +#endif + /** * struct genl_ops - generic netlink operations * @cmd: command identifier @@ -98,8 +126,6 @@ extern int genl_register_mc_group(struct genl_family *family, extern void genl_unregister_mc_group(struct genl_family *family, struct genl_multicast_group *grp); -extern struct sock *genl_sock; - /** * genlmsg_put - Add generic netlink header to netlink message * @skb: socket buffer holding the message @@ -170,7 +196,21 @@ static inline void genlmsg_cancel(struct sk_buff *skb, void *hdr) } /** - * genlmsg_multicast - multicast a netlink message + * genlmsg_multicast_netns - multicast a netlink message to a specific netns + * @net: the net namespace + * @skb: netlink message as socket buffer + * @pid: own netlink pid to avoid sending to yourself + * @group: multicast group id + * @flags: allocation flags + */ +static inline int genlmsg_multicast_netns(struct net *net, struct sk_buff *skb, + u32 pid, unsigned int group, gfp_t flags) +{ + return nlmsg_multicast(net->genl_sock, skb, pid, group, flags); +} + +/** + * genlmsg_multicast - multicast a netlink message to the default netns * @skb: netlink message as socket buffer * @pid: own netlink pid to avoid sending to yourself * @group: multicast group id @@ -179,17 +219,29 @@ static inline void genlmsg_cancel(struct sk_buff *skb, void *hdr) static inline int genlmsg_multicast(struct sk_buff *skb, u32 pid, unsigned int group, gfp_t flags) { - return nlmsg_multicast(genl_sock, skb, pid, group, flags); + return genlmsg_multicast_netns(&init_net, skb, pid, group, flags); } /** + * genlmsg_multicast_allns - multicast a netlink message to all net namespaces + * @skb: netlink message as socket buffer + * @pid: own netlink pid to avoid sending to yourself + * @group: multicast group id + * @flags: allocation flags + * + * This function must hold the RTNL or rcu_read_lock(). + */ +int genlmsg_multicast_allns(struct sk_buff *skb, u32 pid, + unsigned int group, gfp_t flags); + +/** * genlmsg_unicast - unicast a netlink message * @skb: netlink message as socket buffer * @pid: netlink pid of the destination socket */ -static inline int genlmsg_unicast(struct sk_buff *skb, u32 pid) +static inline int genlmsg_unicast(struct net *net, struct sk_buff *skb, u32 pid) { - return nlmsg_unicast(genl_sock, skb, pid); + return nlmsg_unicast(net->genl_sock, skb, pid); } /** @@ -199,7 +251,7 @@ static inline int genlmsg_unicast(struct sk_buff *skb, u32 pid) */ static inline int genlmsg_reply(struct sk_buff *skb, struct genl_info *info) { - return genlmsg_unicast(skb, info->snd_pid); + return genlmsg_unicast(genl_info_net(info), skb, info->snd_pid); } /** diff --git a/include/net/ipv6.h b/include/net/ipv6.h index f27fd83d67d..ad9a5113025 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -441,6 +441,18 @@ static inline int ipv6_addr_diff(const struct in6_addr *a1, const struct in6_add return __ipv6_addr_diff(a1, a2, sizeof(struct in6_addr)); } +static __inline__ void ipv6_select_ident(struct frag_hdr *fhdr) +{ + static u32 ipv6_fragmentation_id = 1; + static DEFINE_SPINLOCK(ip6_id_lock); + + spin_lock_bh(&ip6_id_lock); + fhdr->identification = htonl(ipv6_fragmentation_id); + if (++ipv6_fragmentation_id == 0) + ipv6_fragmentation_id = 1; + spin_unlock_bh(&ip6_id_lock); +} + /* * Prototypes exported by ipv6 */ diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h index 51b9a37de99..2b3fbbb8669 100644 --- a/include/net/iw_handler.h +++ b/include/net/iw_handler.h @@ -443,7 +443,7 @@ extern int dev_get_wireless_info(char * buffer, char **start, off_t offset, extern void wireless_send_event(struct net_device * dev, unsigned int cmd, union iwreq_data * wrqu, - char * extra); + const char * extra); /* We may need a function to send a stream of events to user space. * More on that later... */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c0610447697..7dd67a1ff4d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -241,6 +241,8 @@ struct ieee80211_bss_conf { * it can be sent out. * @IEEE80211_TX_INTFL_RETRIED: completely internal to mac80211, * used to indicate that a frame was already retried due to PS + * @IEEE80211_TX_INTFL_DONT_ENCRYPT: completely internal to mac80211, + * used to indicate frame should not be encrypted */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), @@ -259,6 +261,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_INTFL_RCALGO = BIT(13), IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), IEEE80211_TX_INTFL_RETRIED = BIT(15), + IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16), }; /** @@ -397,6 +400,11 @@ static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) return (struct ieee80211_tx_info *)skb->cb; } +static inline struct ieee80211_rx_status *IEEE80211_SKB_RXCB(struct sk_buff *skb) +{ + return (struct ieee80211_rx_status *)skb->cb; +} + /** * ieee80211_tx_info_clear_status - clear TX status * @@ -478,7 +486,7 @@ enum mac80211_rx_flags { * * The low-level driver should provide this information (the subset * supported by hardware) to the 802.11 code with each received - * frame. + * frame, in the skb's control buffer (cb). * * @mactime: value in microseconds of the 64-bit Time Synchronization Function * (TSF) timer when the first data symbol (MPDU) arrived at the hardware. @@ -1411,6 +1419,8 @@ enum ieee80211_ampdu_mlme_action { * @rfkill_poll: Poll rfkill hardware state. If you need this, you also * need to set wiphy->rfkill_poll to %true before registration, * and need to call wiphy_rfkill_set_hw_state() in the callback. + * + * @testmode_cmd: Implement a cfg80211 test mode command. */ struct ieee80211_ops { int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); @@ -1461,6 +1471,9 @@ struct ieee80211_ops { struct ieee80211_sta *sta, u16 tid, u16 *ssn); void (*rfkill_poll)(struct ieee80211_hw *hw); +#ifdef CONFIG_NL80211_TESTMODE + int (*testmode_cmd)(struct ieee80211_hw *hw, void *data, int len); +#endif }; /** @@ -1606,9 +1619,11 @@ void ieee80211_free_hw(struct ieee80211_hw *hw); */ void ieee80211_restart_hw(struct ieee80211_hw *hw); -/* trick to avoid symbol clashes with the ieee80211 subsystem */ -void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_rx_status *status); +/* + * trick to avoid symbol clashes with the ieee80211 subsystem, + * use the inline below instead + */ +void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb); /** * ieee80211_rx - receive frame @@ -1624,13 +1639,10 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call - * @status: status of this frame; the status pointer need not be valid - * after this function returns */ -static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_rx_status *status) +static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb) { - __ieee80211_rx(hw, skb, status); + __ieee80211_rx(hw, skb); } /** @@ -1644,13 +1656,8 @@ static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, * * @hw: the hardware this frame came in on * @skb: the buffer to receive, owned by mac80211 after this call - * @status: status of this frame; the status pointer need not be valid - * after this function returns and is not freed by mac80211, - * it is recommended that it points to a stack area */ -void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_rx_status *status); +void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb); /** * ieee80211_tx_status - transmit status callback @@ -2090,6 +2097,29 @@ static inline int rate_supported(struct ieee80211_sta *sta, return (sta == NULL || sta->supp_rates[band] & BIT(index)); } +/** + * rate_control_send_low - helper for drivers for management/no-ack frames + * + * Rate control algorithms that agree to use the lowest rate to + * send management frames and NO_ACK data with the respective hw + * retries should use this in the beginning of their mac80211 get_rate + * callback. If true is returned the rate control can simply return. + * If false is returned we guarantee that sta and sta and priv_sta is + * not null. + * + * Rate control algorithms wishing to do more intelligent selection of + * rate for multicast/broadcast frames may choose to not use this. + * + * @sta: &struct ieee80211_sta pointer to the target destination. Note + * that this may be null. + * @priv_sta: private rate control structure. This may be null. + * @txrc: rate control information we sholud populate for mac80211. + */ +bool rate_control_send_low(struct ieee80211_sta *sta, + void *priv_sta, + struct ieee80211_tx_rate_control *txrc); + + static inline s8 rate_lowest_index(struct ieee80211_supported_band *sband, struct ieee80211_sta *sta) @@ -2106,6 +2136,17 @@ rate_lowest_index(struct ieee80211_supported_band *sband, return 0; } +static inline +bool rate_usable_index_exists(struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta) +{ + unsigned int i; + + for (i = 0; i < sband->n_bitrates; i++) + if (rate_supported(sta, sband->band, i)) + return true; + return false; +} int ieee80211_rate_control_register(struct rate_control_ops *ops); void ieee80211_rate_control_unregister(struct rate_control_ops *ops); diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index ded434b032a..a1202841aad 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -26,6 +26,7 @@ struct net_device; struct sock; struct ctl_table_header; struct net_generic; +struct sock; struct net { atomic_t count; /* To decided when the network @@ -57,6 +58,7 @@ struct net { spinlock_t rules_mod_lock; struct sock *rtnl; /* rtnetlink socket */ + struct sock *genl_sock; struct netns_core core; struct netns_mib mib; @@ -78,6 +80,9 @@ struct net { #ifdef CONFIG_XFRM struct netns_xfrm xfrm; #endif +#ifdef CONFIG_WIRELESS_EXT + struct sk_buff_head wext_nlevents; +#endif struct net_generic *gen; }; @@ -106,6 +111,8 @@ static inline struct net *copy_net_ns(unsigned long flags, struct net *net_ns) extern struct list_head net_namespace_list; +extern struct net *get_net_ns_by_pid(pid_t pid); + #ifdef CONFIG_NET_NS extern void __put_net(struct net *net); @@ -208,6 +215,9 @@ static inline struct net *read_pnet(struct net * const *pnet) #define for_each_net(VAR) \ list_for_each_entry(VAR, &net_namespace_list, list) +#define for_each_net_rcu(VAR) \ + list_for_each_entry_rcu(VAR, &net_namespace_list, list) + #ifdef CONFIG_NET_NS #define __net_init #define __net_exit @@ -229,13 +239,15 @@ struct pernet_operations { * needs per network namespace operations use device pernet operations, * otherwise use pernet subsys operations. * - * This is critically important. Most of the network code cleanup - * runs with the assumption that dev_remove_pack has been called so no - * new packets will arrive during and after the cleanup functions have - * been called. dev_remove_pack is not per namespace so instead the - * guarantee of no more packets arriving in a network namespace is - * provided by ensuring that all network devices and all sockets have - * left the network namespace before the cleanup methods are called. + * Network interfaces need to be removed from a dying netns _before_ + * subsys notifiers can be called, as most of the network code cleanup + * (which is done from subsys notifiers) runs with the assumption that + * dev_remove_pack has been called so no new packets will arrive during + * and after the cleanup functions have been called. dev_remove_pack + * is not per namespace so instead the guarantee of no more packets + * arriving in a network namespace is provided by ensuring that all + * network devices and all sockets have left the network namespace + * before the cleanup methods are called. * * For the longest time the ipv4 icmp code was registered as a pernet * device which caused kernel oops, and panics during network diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index a632689b61b..cbdd6284996 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -258,8 +258,8 @@ static inline bool nf_ct_kill(struct nf_conn *ct) /* Update TCP window tracking data when NAT mangles the packet */ extern void nf_conntrack_tcp_update(const struct sk_buff *skb, unsigned int dataoff, - struct nf_conn *ct, - int dir); + struct nf_conn *ct, int dir, + s16 offset); /* Fake conntrack entry for untracked connections */ extern struct nf_conn nf_conntrack_untracked; diff --git a/include/net/netns/x_tables.h b/include/net/netns/x_tables.h index 9554a644a8f..591db7d657a 100644 --- a/include/net/netns/x_tables.h +++ b/include/net/netns/x_tables.h @@ -8,8 +8,11 @@ struct ebt_table; struct netns_xt { struct list_head tables[NFPROTO_NUMPROTO]; +#if defined(CONFIG_BRIDGE_NF_EBTABLES) || \ + defined(CONFIG_BRIDGE_NF_EBTABLES_MODULE) struct ebt_table *broute_table; struct ebt_table *frame_filter; struct ebt_table *frame_nat; +#endif }; #endif diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h index 5054dc5ea2c..44c923c9e21 100644 --- a/include/net/phonet/pn_dev.h +++ b/include/net/phonet/pn_dev.h @@ -45,7 +45,10 @@ int phonet_address_add(struct net_device *dev, u8 addr); int phonet_address_del(struct net_device *dev, u8 addr); u8 phonet_address_get(struct net_device *dev, u8 addr); int phonet_address_lookup(struct net *net, u8 addr); +void phonet_address_notify(int event, struct net_device *dev, u8 addr); #define PN_NO_ADDR 0xff +extern const struct file_operations pn_sock_seq_fops; + #endif diff --git a/include/net/scm.h b/include/net/scm.h index f45bb6eca7d..cf48c800e92 100644 --- a/include/net/scm.h +++ b/include/net/scm.h @@ -26,7 +26,6 @@ struct scm_cookie #ifdef CONFIG_SECURITY_NETWORK u32 secid; /* Passed security ID */ #endif - unsigned long seq; /* Connection seqno */ }; extern void scm_detach_fds(struct msghdr *msg, struct scm_cookie *scm); @@ -59,7 +58,6 @@ static __inline__ int scm_send(struct socket *sock, struct msghdr *msg, scm->creds.gid = current_gid(); scm->creds.pid = task_tgid_vnr(p); scm->fp = NULL; - scm->seq = 0; unix_get_peersec_dgram(sock, scm); if (msg->msg_controllen <= 0) return 0; diff --git a/include/net/sock.h b/include/net/sock.h index 352f06bbd7a..950409dcec3 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -54,6 +54,7 @@ #include <linux/filter.h> #include <linux/rculist_nulls.h> +#include <linux/poll.h> #include <asm/atomic.h> #include <net/dst.h> @@ -103,15 +104,15 @@ struct net; /** * struct sock_common - minimal network layer representation of sockets + * @skc_node: main hash linkage for various protocol lookup tables + * @skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol + * @skc_refcnt: reference count + * @skc_hash: hash value used with various protocol lookup tables * @skc_family: network address family * @skc_state: Connection state * @skc_reuse: %SO_REUSEADDR setting * @skc_bound_dev_if: bound device index if != 0 - * @skc_node: main hash linkage for various protocol lookup tables - * @skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol * @skc_bind_node: bind hash linkage for various protocol lookup tables - * @skc_refcnt: reference count - * @skc_hash: hash value used with various protocol lookup tables * @skc_prot: protocol handlers inside a network family * @skc_net: reference to the network namespace of this socket * @@ -119,17 +120,21 @@ struct net; * for struct sock and struct inet_timewait_sock. */ struct sock_common { - unsigned short skc_family; - volatile unsigned char skc_state; - unsigned char skc_reuse; - int skc_bound_dev_if; + /* + * first fields are not copied in sock_copy() + */ union { struct hlist_node skc_node; struct hlist_nulls_node skc_nulls_node; }; - struct hlist_node skc_bind_node; atomic_t skc_refcnt; + unsigned int skc_hash; + unsigned short skc_family; + volatile unsigned char skc_state; + unsigned char skc_reuse; + int skc_bound_dev_if; + struct hlist_node skc_bind_node; struct proto *skc_prot; #ifdef CONFIG_NET_NS struct net *skc_net; @@ -207,15 +212,17 @@ struct sock { * don't add nothing before this first member (__sk_common) --acme */ struct sock_common __sk_common; +#define sk_node __sk_common.skc_node +#define sk_nulls_node __sk_common.skc_nulls_node +#define sk_refcnt __sk_common.skc_refcnt + +#define sk_copy_start __sk_common.skc_hash +#define sk_hash __sk_common.skc_hash #define sk_family __sk_common.skc_family #define sk_state __sk_common.skc_state #define sk_reuse __sk_common.skc_reuse #define sk_bound_dev_if __sk_common.skc_bound_dev_if -#define sk_node __sk_common.skc_node -#define sk_nulls_node __sk_common.skc_nulls_node #define sk_bind_node __sk_common.skc_bind_node -#define sk_refcnt __sk_common.skc_refcnt -#define sk_hash __sk_common.skc_hash #define sk_prot __sk_common.skc_prot #define sk_net __sk_common.skc_net kmemcheck_bitfield_begin(flags); @@ -1241,6 +1248,74 @@ static inline int sk_has_allocations(const struct sock *sk) return sk_wmem_alloc_get(sk) || sk_rmem_alloc_get(sk); } +/** + * sk_has_sleeper - check if there are any waiting processes + * @sk: socket + * + * Returns true if socket has waiting processes + * + * The purpose of the sk_has_sleeper and sock_poll_wait is to wrap the memory + * barrier call. They were added due to the race found within the tcp code. + * + * Consider following tcp code paths: + * + * CPU1 CPU2 + * + * sys_select receive packet + * ... ... + * __add_wait_queue update tp->rcv_nxt + * ... ... + * tp->rcv_nxt check sock_def_readable + * ... { + * schedule ... + * if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) + * wake_up_interruptible(sk->sk_sleep) + * ... + * } + * + * The race for tcp fires when the __add_wait_queue changes done by CPU1 stay + * in its cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1 + * could then endup calling schedule and sleep forever if there are no more + * data on the socket. + * + * The sk_has_sleeper is always called right after a call to read_lock, so we + * can use smp_mb__after_lock barrier. + */ +static inline int sk_has_sleeper(struct sock *sk) +{ + /* + * We need to be sure we are in sync with the + * add_wait_queue modifications to the wait queue. + * + * This memory barrier is paired in the sock_poll_wait. + */ + smp_mb__after_lock(); + return sk->sk_sleep && waitqueue_active(sk->sk_sleep); +} + +/** + * sock_poll_wait - place memory barrier behind the poll_wait call. + * @filp: file + * @wait_address: socket wait queue + * @p: poll_table + * + * See the comments in the sk_has_sleeper function. + */ +static inline void sock_poll_wait(struct file *filp, + wait_queue_head_t *wait_address, poll_table *p) +{ + if (p && wait_address) { + poll_wait(filp, wait_address, p); + /* + * We need to be sure we are in sync with the + * socket flags modification. + * + * This memory barrier is paired in the sk_has_sleeper. + */ + smp_mb(); + } +} + /* * Queue a received datagram if it will fit. Stream and sequenced * protocols can't normally use this as they need to fit buffers in diff --git a/include/net/tcp.h b/include/net/tcp.h index 19f4150f4d4..88af8430647 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -1425,6 +1425,11 @@ struct tcp_request_sock_ops { #ifdef CONFIG_TCP_MD5SIG struct tcp_md5sig_key *(*md5_lookup) (struct sock *sk, struct request_sock *req); + int (*calc_md5_hash) (char *location, + struct tcp_md5sig_key *md5, + struct sock *sk, + struct request_sock *req, + struct sk_buff *skb); #endif }; diff --git a/include/net/udp.h b/include/net/udp.h index 90e6ce56be6..5fb029f817a 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -207,4 +207,7 @@ extern void udp4_proc_exit(void); #endif extern void udp_init(void); + +extern int udp4_ufo_send_check(struct sk_buff *skb); +extern struct sk_buff *udp4_ufo_fragment(struct sk_buff *skb, int features); #endif /* _UDP_H */ |