diff options
Diffstat (limited to 'include')
71 files changed, 252 insertions, 634 deletions
diff --git a/include/asm-alpha/dma-mapping.h b/include/asm-alpha/dma-mapping.h index 57e09f5e342..75a1aff5b57 100644 --- a/include/asm-alpha/dma-mapping.h +++ b/include/asm-alpha/dma-mapping.h @@ -41,9 +41,9 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, #define dma_map_single(dev, va, size, dir) virt_to_phys(va) #define dma_map_page(dev, page, off, size, dir) (page_to_pa(page) + off) -#define dma_unmap_single(dev, addr, size, dir) do { } while (0) -#define dma_unmap_page(dev, addr, size, dir) do { } while (0) -#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) +#define dma_unmap_single(dev, addr, size, dir) ((void)0) +#define dma_unmap_page(dev, addr, size, dir) ((void)0) +#define dma_unmap_sg(dev, sg, nents, dir) ((void)0) #define dma_mapping_error(addr) (0) @@ -55,12 +55,14 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dma_set_mask(struct device *dev, u64 mask); -#define dma_sync_single_for_cpu(dev, addr, size, dir) do { } while (0) -#define dma_sync_single_for_device(dev, addr, size, dir) do { } while (0) -#define dma_sync_single_range(dev, addr, off, size, dir) do { } while (0) -#define dma_sync_sg_for_cpu(dev, sg, nents, dir) do { } while (0) -#define dma_sync_sg_for_device(dev, sg, nents, dir) do { } while (0) -#define dma_cache_sync(dev, va, size, dir) do { } while (0) +#define dma_sync_single_for_cpu(dev, addr, size, dir) ((void)0) +#define dma_sync_single_for_device(dev, addr, size, dir) ((void)0) +#define dma_sync_single_range(dev, addr, off, size, dir) ((void)0) +#define dma_sync_sg_for_cpu(dev, sg, nents, dir) ((void)0) +#define dma_sync_sg_for_device(dev, sg, nents, dir) ((void)0) +#define dma_cache_sync(dev, va, size, dir) ((void)0) +#define dma_sync_single_range_for_cpu(dev, addr, offset, size, dir) ((void)0) +#define dma_sync_single_range_for_device(dev, addr, offset, size, dir) ((void)0) #define dma_get_cache_alignment() L1_CACHE_BYTES diff --git a/include/asm-arm/arch-at91rm9200/at91_ecc.h b/include/asm-arm/arch-at91rm9200/at91_ecc.h index fddf256a98d..5c564ede5c5 100644 --- a/include/asm-arm/arch-at91rm9200/at91_ecc.h +++ b/include/asm-arm/arch-at91rm9200/at91_ecc.h @@ -14,7 +14,7 @@ #define AT91_ECC_H #define AT91_ECC_CR (AT91_ECC + 0x00) /* Control register */ -#define AT91_ECC_RST (1 << 0) /* Reset parity */ +#define AT91_ECC_RST (1 << 0) /* Reset parity */ #define AT91_ECC_MR (AT91_ECC + 0x04) /* Mode register */ #define AT91_ECC_PAGESIZE (3 << 0) /* Page Size */ @@ -23,16 +23,16 @@ #define AT91_ECC_PAGESIZE_2112 (2) #define AT91_ECC_PAGESIZE_4224 (3) -#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */ +#define AT91_ECC_SR (AT91_ECC + 0x08) /* Status register */ #define AT91_ECC_RECERR (1 << 0) /* Recoverable Error */ #define AT91_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */ #define AT91_ECC_MULERR (1 << 2) /* Multiple Errors */ -#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */ +#define AT91_ECC_PR (AT91_ECC + 0x0c) /* Parity register */ #define AT91_ECC_BITADDR (0xf << 0) /* Bit Error Address */ #define AT91_ECC_WORDADDR (0xfff << 4) /* Word Error Address */ -#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */ +#define AT91_ECC_NPR (AT91_ECC + 0x10) /* NParity register */ #define AT91_ECC_NPARITY (0xffff << 0) /* NParity */ #endif diff --git a/include/asm-arm/arch-at91rm9200/at91_pmc.h b/include/asm-arm/arch-at91rm9200/at91_pmc.h index de8c3da74a0..c3b489d09b6 100644 --- a/include/asm-arm/arch-at91rm9200/at91_pmc.h +++ b/include/asm-arm/arch-at91rm9200/at91_pmc.h @@ -61,7 +61,7 @@ #define AT91_PMC_CSS_PLLA (2 << 0) #define AT91_PMC_CSS_PLLB (3 << 0) #define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */ -#define AT91_PMC_PRES_1 (0 << 2) +#define AT91_PMC_PRES_1 (0 << 2) #define AT91_PMC_PRES_2 (1 << 2) #define AT91_PMC_PRES_4 (2 << 2) #define AT91_PMC_PRES_8 (3 << 2) diff --git a/include/asm-arm/arch-at91rm9200/at91_rstc.h b/include/asm-arm/arch-at91rm9200/at91_rstc.h index ccdc52da973..237d3c40b31 100644 --- a/include/asm-arm/arch-at91rm9200/at91_rstc.h +++ b/include/asm-arm/arch-at91rm9200/at91_rstc.h @@ -17,7 +17,7 @@ #define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ #define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ #define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ -#define AT01_RSTC_KEY (0xff << 24) /* KEY Password */ +#define AT91_RSTC_KEY (0xff << 24) /* KEY Password */ #define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ #define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ diff --git a/include/asm-arm/arch-at91rm9200/at91_rtc.h b/include/asm-arm/arch-at91rm9200/at91_rtc.h index 6e5065d5626..095fe088310 100644 --- a/include/asm-arm/arch-at91rm9200/at91_rtc.h +++ b/include/asm-arm/arch-at91rm9200/at91_rtc.h @@ -21,21 +21,21 @@ #define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */ #define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */ #define AT91_RTC_TIMEVSEL_MINUTE (0 << 8) -#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) -#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) -#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) +#define AT91_RTC_TIMEVSEL_HOUR (1 << 8) +#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8) +#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8) #define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */ -#define AT91_RTC_CALEVSEL_WEEK (0 << 16) -#define AT91_RTC_CALEVSEL_MONTH (1 << 16) -#define AT91_RTC_CALEVSEL_YEAR (2 << 16) +#define AT91_RTC_CALEVSEL_WEEK (0 << 16) +#define AT91_RTC_CALEVSEL_MONTH (1 << 16) +#define AT91_RTC_CALEVSEL_YEAR (2 << 16) #define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */ -#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ +#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */ #define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */ #define AT91_RTC_SEC (0x7f << 0) /* Current Second */ #define AT91_RTC_MIN (0x7f << 8) /* Current Minute */ -#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ +#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */ #define AT91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */ #define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */ diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h index 4d51177efdd..c569b6a21a4 100644 --- a/include/asm-arm/arch-at91rm9200/at91rm9200.h +++ b/include/asm-arm/arch-at91rm9200/at91rm9200.h @@ -274,7 +274,7 @@ #define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */ #define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */ #define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */ -#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */ +#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */ #define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */ #define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */ #define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */ diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h index 746d973705b..78f6b4917b8 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h +++ b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h @@ -58,7 +58,7 @@ #define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ #define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ +#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_CS1A_SMC (0 << 1) #define AT91_MATRIX_CS1A_SDRAMC (1 << 1) #define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h index 270a5dcdf1c..ec88efabbe6 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h +++ b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h @@ -15,7 +15,7 @@ #define AT91_MATRIX_MCFG (AT91_MATRIX + 0x00) /* Master Configuration Register */ #define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT01_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ +#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ #define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x04) /* Slave Configuration Register 0 */ #define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x08) /* Slave Configuration Register 1 */ @@ -43,8 +43,8 @@ #define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x30) /* EBI Chip Select Assignment Register */ #define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) +#define AT91_MATRIX_CS1A_SMC (0 << 1) +#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) #define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ #define AT91_MATRIX_CS3A_SMC (0 << 3) #define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h index 7d94968b5d5..972e7531c7f 100644 --- a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h +++ b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h @@ -33,14 +33,14 @@ #define AT91_SDRAMC_NC_9 (1 << 0) #define AT91_SDRAMC_NC_10 (2 << 0) #define AT91_SDRAMC_NC_11 (3 << 0) -#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ +#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */ #define AT91_SDRAMC_NR_11 (0 << 2) #define AT91_SDRAMC_NR_12 (1 << 2) #define AT91_SDRAMC_NR_13 (2 << 2) -#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ +#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */ #define AT91_SDRAMC_NB_2 (0 << 4) -#define AT91_SDRAMC_NB_4 (1 << 4) -#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ +#define AT91_SDRAMC_NB_4 (1 << 4) +#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */ #define AT91_SDRAMC_CAS_1 (1 << 5) #define AT91_SDRAMC_CAS_2 (2 << 5) #define AT91_SDRAMC_CAS_3 (3 << 5) @@ -110,10 +110,10 @@ #define AT91_SMC_MODE(n) (AT91_SMC + 0x0c + ((n)*0x10)) /* Mode Register for CS n */ #define AT91_SMC_READMODE (1 << 0) /* Read Mode */ #define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ -#define AT91_SMC_EXNWMODE (3 << 5) /* NWAIT Mode */ -#define AT91_SMC_EXNWMODE_DISABLE (0 << 5) -#define AT91_SMC_EXNWMODE_FROZEN (2 << 5) -#define AT91_SMC_EXNWMODE_READY (3 << 5) +#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ +#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) +#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) +#define AT91_SMC_EXNWMODE_READY (3 << 4) #define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ #define AT91_SMC_BAT_SELECT (0 << 8) #define AT91_SMC_BAT_WRITE (1 << 8) diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h index b2893e32a23..eae91694edc 100644 --- a/include/asm-arm/arch-s3c2410/regs-gpio.h +++ b/include/asm-arm/arch-s3c2410/regs-gpio.h @@ -52,10 +52,10 @@ /* general configuration options */ #define S3C2410_GPIO_LEAVE (0xFFFFFFFF) -#define S3C2410_GPIO_INPUT (0xFFFFFFF0) +#define S3C2410_GPIO_INPUT (0xFFFFFFF0) /* not available on A */ #define S3C2410_GPIO_OUTPUT (0xFFFFFFF1) #define S3C2410_GPIO_IRQ (0xFFFFFFF2) /* not available for all */ -#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* not available on A */ +#define S3C2410_GPIO_SFN2 (0xFFFFFFF2) /* bank A => addr/cs/nand */ #define S3C2410_GPIO_SFN3 (0xFFFFFFF3) /* not available on A */ /* register address for the GPIO registers. diff --git a/include/asm-arm/arch-s3c2410/regs-mem.h b/include/asm-arm/arch-s3c2410/regs-mem.h index 375dca50364..e4d82341f7b 100644 --- a/include/asm-arm/arch-s3c2410/regs-mem.h +++ b/include/asm-arm/arch-s3c2410/regs-mem.h @@ -133,10 +133,10 @@ #define S3C2410_BANKCON_SDRAM (0x3 << 15) /* next bits only for EDO DRAM in 6,7 */ -#define S3C2400_BANKCON_EDO_Trdc1 (0x00 << 4) -#define S3C2400_BANKCON_EDO_Trdc2 (0x01 << 4) -#define S3C2400_BANKCON_EDO_Trdc3 (0x02 << 4) -#define S3C2400_BANKCON_EDO_Trdc4 (0x03 << 4) +#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4) +#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4) +#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4) +#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4) /* CAS pulse width */ #define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3) @@ -153,9 +153,9 @@ #define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0) /* next bits only for SDRAM in 6,7 */ -#define S3C2410_BANKCON_Trdc2 (0x00 << 2) -#define S3C2410_BANKCON_Trdc3 (0x01 << 2) -#define S3C2410_BANKCON_Trdc4 (0x02 << 2) +#define S3C2410_BANKCON_Trcd2 (0x00 << 2) +#define S3C2410_BANKCON_Trcd3 (0x01 << 2) +#define S3C2410_BANKCON_Trcd4 (0x02 << 2) /* control column address select */ #define S3C2410_BANKCON_SCANb8 (0x00 << 0) diff --git a/include/asm-arm/fpstate.h b/include/asm-arm/fpstate.h index 6af4e6bd129..f31cda5a55e 100644 --- a/include/asm-arm/fpstate.h +++ b/include/asm-arm/fpstate.h @@ -35,6 +35,9 @@ struct vfp_hard_struct { */ __u32 fpinst; __u32 fpinst2; +#ifdef CONFIG_SMP + __u32 cpu; +#endif }; union vfp_state { diff --git a/include/asm-generic/libata-portmap.h b/include/asm-generic/libata-portmap.h index 9202fd02d5b..62fb3618293 100644 --- a/include/asm-generic/libata-portmap.h +++ b/include/asm-generic/libata-portmap.h @@ -3,10 +3,10 @@ #define ATA_PRIMARY_CMD 0x1F0 #define ATA_PRIMARY_CTL 0x3F6 -#define ATA_PRIMARY_IRQ 14 +#define ATA_PRIMARY_IRQ(dev) 14 #define ATA_SECONDARY_CMD 0x170 #define ATA_SECONDARY_CTL 0x376 -#define ATA_SECONDARY_IRQ 15 +#define ATA_SECONDARY_IRQ(dev) 15 #endif diff --git a/include/asm-i386/elf.h b/include/asm-i386/elf.h index 45d21a0c95b..369035dfe4b 100644 --- a/include/asm-i386/elf.h +++ b/include/asm-i386/elf.h @@ -143,11 +143,8 @@ extern int dump_task_extended_fpu (struct task_struct *, struct user_fxsr_struct # define VDSO_PRELINK 0 #endif -#define VDSO_COMPAT_SYM(x) \ - (VDSO_COMPAT_BASE + (unsigned long)(x) - VDSO_PRELINK) - #define VDSO_SYM(x) \ - (VDSO_BASE + (unsigned long)(x) - VDSO_PRELINK) + (VDSO_COMPAT_BASE + (unsigned long)(x) - VDSO_PRELINK) #define VDSO_HIGH_EHDR ((const struct elfhdr *) VDSO_HIGH_BASE) #define VDSO_EHDR ((const struct elfhdr *) VDSO_COMPAT_BASE) @@ -156,10 +153,12 @@ extern void __kernel_vsyscall; #define VDSO_ENTRY VDSO_SYM(&__kernel_vsyscall) +#ifndef CONFIG_COMPAT_VDSO #define ARCH_HAS_SETUP_ADDITIONAL_PAGES struct linux_binprm; extern int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack); +#endif extern unsigned int vdso_enabled; @@ -169,50 +168,6 @@ do if (vdso_enabled) { \ NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_COMPAT_BASE); \ } while (0) -/* - * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out - * extra segments containing the vsyscall DSO contents. Dumping its - * contents makes post-mortem fully interpretable later without matching up - * the same kernel and hardware config to see what PC values meant. - * Dumping its extra ELF program headers includes all the other information - * a debugger needs to easily find how the vsyscall DSO was being used. - */ -#define ELF_CORE_EXTRA_PHDRS (VDSO_HIGH_EHDR->e_phnum) -#define ELF_CORE_WRITE_EXTRA_PHDRS \ -do { \ - const struct elf_phdr *const vsyscall_phdrs = \ - (const struct elf_phdr *) (VDSO_HIGH_BASE \ - + VDSO_HIGH_EHDR->e_phoff); \ - int i; \ - Elf32_Off ofs = 0; \ - for (i = 0; i < VDSO_HIGH_EHDR->e_phnum; ++i) { \ - struct elf_phdr phdr = vsyscall_phdrs[i]; \ - if (phdr.p_type == PT_LOAD) { \ - BUG_ON(ofs != 0); \ - ofs = phdr.p_offset = offset; \ - phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz); \ - phdr.p_filesz = phdr.p_memsz; \ - offset += phdr.p_filesz; \ - } \ - else \ - phdr.p_offset += ofs; \ - phdr.p_paddr = 0; /* match other core phdrs */ \ - DUMP_WRITE(&phdr, sizeof(phdr)); \ - } \ -} while (0) -#define ELF_CORE_WRITE_EXTRA_DATA \ -do { \ - const struct elf_phdr *const vsyscall_phdrs = \ - (const struct elf_phdr *) (VDSO_HIGH_BASE \ - + VDSO_HIGH_EHDR->e_phoff); \ - int i; \ - for (i = 0; i < VDSO_HIGH_EHDR->e_phnum; ++i) { \ - if (vsyscall_phdrs[i].p_type == PT_LOAD) \ - DUMP_WRITE((void *) vsyscall_phdrs[i].p_vaddr, \ - PAGE_ALIGN(vsyscall_phdrs[i].p_memsz)); \ - } \ -} while (0) - #endif #endif diff --git a/include/asm-i386/fixmap.h b/include/asm-i386/fixmap.h index 02428cb3662..3e9f610c35d 100644 --- a/include/asm-i386/fixmap.h +++ b/include/asm-i386/fixmap.h @@ -23,6 +23,8 @@ extern unsigned long __FIXADDR_TOP; #else #define __FIXADDR_TOP 0xfffff000 +#define FIXADDR_USER_START __fix_to_virt(FIX_VDSO) +#define FIXADDR_USER_END __fix_to_virt(FIX_VDSO - 1) #endif #ifndef __ASSEMBLY__ diff --git a/include/asm-i386/page.h b/include/asm-i386/page.h index fd3f64ace24..7b19f454761 100644 --- a/include/asm-i386/page.h +++ b/include/asm-i386/page.h @@ -143,7 +143,9 @@ extern int page_is_ram(unsigned long pagenr); #include <asm-generic/memory_model.h> #include <asm-generic/page.h> +#ifndef CONFIG_COMPAT_VDSO #define __HAVE_ARCH_GATE_AREA 1 +#endif #endif /* __KERNEL__ */ #endif /* _I386_PAGE_H */ diff --git a/include/asm-i386/processor.h b/include/asm-i386/processor.h index a52d6544042..359f10b54f5 100644 --- a/include/asm-i386/processor.h +++ b/include/asm-i386/processor.h @@ -743,6 +743,7 @@ extern void enable_sep_cpu(void); extern int sysenter_setup(void); extern int init_gdt(int cpu, struct task_struct *idle); +extern void cpu_set_gdt(int); extern void secondary_cpu_init(void); #endif /* __ASM_I386_PROCESSOR_H */ diff --git a/include/asm-ia64/checksum.h b/include/asm-ia64/checksum.h index 2b78582cbd6..97af155057e 100644 --- a/include/asm-ia64/checksum.h +++ b/include/asm-ia64/checksum.h @@ -72,8 +72,8 @@ static inline __sum16 csum_fold(__wsum csum) #define _HAVE_ARCH_IPV6_CSUM 1 struct in6_addr; -extern unsigned short int csum_ipv6_magic(struct in6_addr *saddr, - struct in6_addr *daddr, __u32 len, unsigned short proto, - unsigned int csum); +extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, __u32 len, unsigned short proto, + __wsum csum); #endif /* _ASM_IA64_CHECKSUM_H */ diff --git a/include/asm-ia64/pci.h b/include/asm-ia64/pci.h index 556f53fa44c..5160233bbfa 100644 --- a/include/asm-ia64/pci.h +++ b/include/asm-ia64/pci.h @@ -167,4 +167,10 @@ pcibios_select_root(struct pci_dev *pdev, struct resource *res) #define pcibios_scan_all_fns(a, b) 0 +#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? 15 : 14; +} + #endif /* _ASM_IA64_PCI_H */ diff --git a/include/asm-m68k/uaccess.h b/include/asm-m68k/uaccess.h index e4c9f080ff2..6a4cf208151 100644 --- a/include/asm-m68k/uaccess.h +++ b/include/asm-m68k/uaccess.h @@ -7,6 +7,7 @@ #include <linux/compiler.h> #include <linux/errno.h> #include <linux/types.h> +#include <linux/sched.h> #include <asm/segment.h> #define VERIFY_READ 0 diff --git a/include/asm-mips/checksum.h b/include/asm-mips/checksum.h index 24cdcc6eaab..20a81e1548f 100644 --- a/include/asm-mips/checksum.h +++ b/include/asm-mips/checksum.h @@ -159,7 +159,8 @@ static inline __wsum csum_tcpudp_nofold(__be32 saddr, #endif " .set pop" : "=r" (sum) - : "0" (daddr), "r"(saddr), + : "0" ((__force unsigned long)daddr), + "r" ((__force unsigned long)saddr), #ifdef __MIPSEL__ "r" ((proto + len) << 8), #else diff --git a/include/asm-mips/hazards.h b/include/asm-mips/hazards.h index 0fe02945feb..50073157a61 100644 --- a/include/asm-mips/hazards.h +++ b/include/asm-mips/hazards.h @@ -157,7 +157,7 @@ ASMMACRO(back_to_back_c0_hazard, * processors. */ ASMMACRO(mtc0_tlbw_hazard, - nop + nop; nop ) ASMMACRO(tlbw_use_hazard, nop; nop; nop diff --git a/include/asm-mips/irqflags.h b/include/asm-mips/irqflags.h index 46bf5de5ac7..af3b07dfad4 100644 --- a/include/asm-mips/irqflags.h +++ b/include/asm-mips/irqflags.h @@ -15,6 +15,27 @@ #include <asm/hazards.h> +/* + * CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY does prompt replay of deferred IPIs, + * at the cost of branch and call overhead on each local_irq_restore() + */ + +#ifdef CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY + +extern void smtc_ipi_replay(void); + +#define irq_restore_epilog(flags) \ +do { \ + if (!(flags & 0x0400)) \ + smtc_ipi_replay(); \ +} while (0) + +#else + +#define irq_restore_epilog(ignore) do { } while (0) + +#endif /* CONFIG_MIPS_MT_SMTC_INSTANT_REPLAY */ + __asm__ ( " .macro raw_local_irq_enable \n" " .set push \n" @@ -193,6 +214,7 @@ do { \ : "=r" (__tmp1) \ : "0" (flags) \ : "memory"); \ + irq_restore_epilog(flags); \ } while(0) static inline int raw_irqs_disabled_flags(unsigned long flags) diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h index f2e1325fec6..3fcfd7979de 100644 --- a/include/asm-mips/pgtable.h +++ b/include/asm-mips/pgtable.h @@ -69,16 +69,6 @@ extern unsigned long zero_page_mask; #define ZERO_PAGE(vaddr) \ (virt_to_page((void *)(empty_zero_page + (((unsigned long)(vaddr)) & zero_page_mask)))) -#define __HAVE_ARCH_MOVE_PTE -#define move_pte(pte, prot, old_addr, new_addr) \ -({ \ - pte_t newpte = (pte); \ - if (pte_present(pte) && pfn_valid(pte_pfn(pte)) && \ - pte_page(pte) == ZERO_PAGE(old_addr)) \ - newpte = mk_pte(ZERO_PAGE(new_addr), (prot)); \ - newpte; \ -}) - extern void paging_init(void); /* diff --git a/include/asm-mips/thread_info.h b/include/asm-mips/thread_info.h index e475c45ea26..fbcda820447 100644 --- a/include/asm-mips/thread_info.h +++ b/include/asm-mips/thread_info.h @@ -118,6 +118,7 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 +#define TIF_FREEZE 19 #define TIF_SYSCALL_TRACE 31 /* syscall trace active */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) @@ -129,6 +130,7 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_USEDFPU (1<<TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) +#define _TIF_FREEZE (1<<TIF_FREEZE) /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK (0x0000ffef & ~_TIF_SECCOMP) diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h index 53283e2540b..f038e33e6d4 100644 --- a/include/asm-powerpc/atomic.h +++ b/include/asm-powerpc/atomic.h @@ -207,7 +207,8 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) /* * Atomically test *v and decrement if it is greater than 0. - * The function returns the old value of *v minus 1. + * The function returns the old value of *v minus 1, even if + * the atomic variable, v, was not decremented. */ static __inline__ int atomic_dec_if_positive(atomic_t *v) { @@ -216,14 +217,15 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) __asm__ __volatile__( LWSYNC_ON_SMP "1: lwarx %0,0,%1 # atomic_dec_if_positive\n\ - addic. %0,%0,-1\n\ + cmpwi %0,1\n\ + addi %0,%0,-1\n\ blt- 2f\n" PPC405_ERR77(0,%1) " stwcx. %0,0,%1\n\ bne- 1b" ISYNC_ON_SMP "\n\ -2:" : "=&r" (t) +2:" : "=&b" (t) : "r" (&v->counter) : "cc", "memory"); diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h index 7c7de87bd8a..a19a6f1a1cf 100644 --- a/include/asm-powerpc/dma-mapping.h +++ b/include/asm-powerpc/dma-mapping.h @@ -37,9 +37,9 @@ extern void __dma_sync_page(struct page *page, unsigned long offset, */ #define __dma_alloc_coherent(gfp, size, handle) NULL -#define __dma_free_coherent(size, addr) do { } while (0) -#define __dma_sync(addr, size, rw) do { } while (0) -#define __dma_sync_page(pg, off, sz, rw) do { } while (0) +#define __dma_free_coherent(size, addr) ((void)0) +#define __dma_sync(addr, size, rw) ((void)0) +#define __dma_sync_page(pg, off, sz, rw) ((void)0) #endif /* ! CONFIG_NOT_COHERENT_CACHE */ @@ -251,7 +251,7 @@ dma_map_single(struct device *dev, void *ptr, size_t size, } /* We do nothing. */ -#define dma_unmap_single(dev, addr, size, dir) do { } while (0) +#define dma_unmap_single(dev, addr, size, dir) ((void)0) static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, @@ -266,7 +266,7 @@ dma_map_page(struct device *dev, struct page *page, } /* We do nothing. */ -#define dma_unmap_page(dev, handle, size, dir) do { } while (0) +#define dma_unmap_page(dev, handle, size, dir) ((void)0) static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, @@ -286,7 +286,7 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, } /* We don't do anything here. */ -#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) +#define dma_unmap_sg(dev, sg, nents, dir) ((void)0) #endif /* CONFIG_PPC64 */ diff --git a/include/asm-powerpc/libata-portmap.h b/include/asm-powerpc/libata-portmap.h new file mode 100644 index 00000000000..4d8518049f4 --- /dev/null +++ b/include/asm-powerpc/libata-portmap.h @@ -0,0 +1,12 @@ +#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H +#define __ASM_POWERPC_LIBATA_PORTMAP_H + +#define ATA_PRIMARY_CMD 0x1F0 +#define ATA_PRIMARY_CTL 0x3F6 +#define ATA_PRIMARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 0) + +#define ATA_SECONDARY_CMD 0x170 +#define ATA_SECONDARY_CTL 0x376 +#define ATA_SECONDARY_IRQ(dev) pci_get_legacy_ide_irq(dev, 1) + +#endif diff --git a/include/asm-x86_64/uaccess.h b/include/asm-x86_64/uaccess.h index d5dbc87274f..c0eac519840 100644 --- a/include/asm-x86_64/uaccess.h +++ b/include/asm-x86_64/uaccess.h @@ -157,7 +157,7 @@ do { \ case 1: __put_user_asm(x,ptr,retval,"b","b","iq",-EFAULT); break;\ case 2: __put_user_asm(x,ptr,retval,"w","w","ir",-EFAULT); break;\ case 4: __put_user_asm(x,ptr,retval,"l","k","ir",-EFAULT); break;\ - case 8: __put_user_asm(x,ptr,retval,"q","","ir",-EFAULT); break;\ + case 8: __put_user_asm(x,ptr,retval,"q","","Zr",-EFAULT); break;\ default: __put_user_bad(); \ } \ } while (0) diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 862e483cce8..157db77a717 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -69,7 +69,6 @@ header-y += hysdn_if.h header-y += i2c-dev.h header-y += i8k.h header-y += icmp.h -header-y += if_addr.h header-y += if_arcnet.h header-y += if_arp.h header-y += if_bonding.h @@ -79,7 +78,6 @@ header-y += if_fddi.h header-y += if.h header-y += if_hippi.h header-y += if_infiniband.h -header-y += if_link.h header-y += if_packet.h header-y += if_plip.h header-y += if_ppp.h @@ -129,7 +127,6 @@ header-y += posix_types.h header-y += ppdev.h header-y += prctl.h header-y += ps2esdi.h -header-y += qic117.h header-y += qnxtypes.h header-y += quotaio_v1.h header-y += quotaio_v2.h @@ -214,6 +211,7 @@ unifdef-y += hpet.h unifdef-y += i2c.h unifdef-y += i2o-dev.h unifdef-y += icmpv6.h +unifdef-y += if_addr.h unifdef-y += if_bridge.h unifdef-y += if_ec.h unifdef-y += if_eql.h @@ -221,6 +219,7 @@ unifdef-y += if_ether.h unifdef-y += if_fddi.h unifdef-y += if_frad.h unifdef-y += if_ltalk.h +unifdef-y += if_link.h unifdef-y += if_pppox.h unifdef-y += if_shaper.h unifdef-y += if_tr.h diff --git a/include/linux/bitops.h b/include/linux/bitops.h index 5d1eabcde5d..638165f571d 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -31,9 +31,8 @@ static inline unsigned long hweight_long(unsigned long w) return sizeof(w) == 4 ? hweight32(w) : hweight64(w); } -/* +/** * rol32 - rotate a 32-bit value left - * * @word: value to rotate * @shift: bits to roll */ @@ -42,9 +41,8 @@ static inline __u32 rol32(__u32 word, unsigned int shift) return (word << shift) | (word >> (32 - shift)); } -/* +/** * ror32 - rotate a 32-bit value right - * * @word: value to rotate * @shift: bits to roll */ diff --git a/include/linux/cdev.h b/include/linux/cdev.h index f309b00e986..1e29b13d006 100644 --- a/include/linux/cdev.h +++ b/include/linux/cdev.h @@ -6,6 +6,10 @@ #include <linux/kdev_t.h> #include <linux/list.h> +struct file_operations; +struct inode; +struct module; + struct cdev { struct kobject kobj; struct module *owner; diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index 2b54eac738e..818c6afc109 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -60,13 +60,15 @@ #define TAG_MASK 0xf8 #endif /* __KERNEL__ */ +#include <linux/types.h> + /* * Command Header sizes for IOCTL commands */ -#define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(u8)) -#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(u8)) -#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(u8)) +#define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(__u8)) +#define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(__u8)) +#define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(__u8)) #define IDE_DRIVE_TASK_INVALID -1 #define IDE_DRIVE_TASK_NO_DATA 0 diff --git a/include/linux/hid-debug.h b/include/linux/hid-debug.h index f04d6d75c09..8e4dbb51fc7 100644 --- a/include/linux/hid-debug.h +++ b/include/linux/hid-debug.h @@ -700,9 +700,10 @@ static char *keys[KEY_MAX + 1] = { static char *relatives[REL_MAX + 1] = { [REL_X] = "X", [REL_Y] = "Y", - [REL_Z] = "Z", [REL_HWHEEL] = "HWheel", - [REL_DIAL] = "Dial", [REL_WHEEL] = "Wheel", - [REL_MISC] = "Misc", + [REL_Z] = "Z", [REL_RX] = "Rx", + [REL_RY] = "Ry", [REL_RZ] = "Rz", + [REL_HWHEEL] = "HWheel", [REL_DIAL] = "Dial", + [REL_WHEEL] = "Wheel", [REL_MISC] = "Misc", }; static char *absolutes[ABS_MAX + 1] = { diff --git a/include/linux/hid.h b/include/linux/hid.h index 770120add15..342b4e639ac 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -438,7 +438,6 @@ struct hid_device { /* device report descriptor */ struct hid_usage *, __s32); void (*hiddev_report_event) (struct hid_device *, struct hid_report *); #ifdef CONFIG_USB_HIDINPUT_POWERBOOK - unsigned int pb_fnmode; unsigned long pb_pressed_fn[NBITS(KEY_MAX)]; unsigned long pb_pressed_numlock[NBITS(KEY_MAX)]; #endif diff --git a/include/linux/i2o-dev.h b/include/linux/i2o-dev.h index c2519df1b6d..a0b23dd4523 100644 --- a/include/linux/i2o-dev.h +++ b/include/linux/i2o-dev.h @@ -24,12 +24,13 @@ #define MAX_I2O_CONTROLLERS 32 #include <linux/ioctl.h> +#include <linux/types.h> /* * I2O Control IOCTLs and structures */ #define I2O_MAGIC_NUMBER 'i' -#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,u8[MAX_I2O_CONTROLLERS]) +#define I2OGETIOPS _IOR(I2O_MAGIC_NUMBER,0,__u8[MAX_I2O_CONTROLLERS]) #define I2OHRTGET _IOWR(I2O_MAGIC_NUMBER,1,struct i2o_cmd_hrtlct) #define I2OLCTGET _IOWR(I2O_MAGIC_NUMBER,2,struct i2o_cmd_hrtlct) #define I2OPARMSET _IOWR(I2O_MAGIC_NUMBER,3,struct i2o_cmd_psetget) @@ -37,7 +38,7 @@ #define I2OSWDL _IOWR(I2O_MAGIC_NUMBER,5,struct i2o_sw_xfer) #define I2OSWUL _IOWR(I2O_MAGIC_NUMBER,6,struct i2o_sw_xfer) #define I2OSWDEL _IOWR(I2O_MAGIC_NUMBER,7,struct i2o_sw_xfer) -#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,u32) +#define I2OVALIDATE _IOR(I2O_MAGIC_NUMBER,8,__u32) #define I2OHTML _IOWR(I2O_MAGIC_NUMBER,9,struct i2o_html) #define I2OEVTREG _IOW(I2O_MAGIC_NUMBER,10,struct i2o_evt_id) #define I2OEVTGET _IOR(I2O_MAGIC_NUMBER,11,struct i2o_evt_info) diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index 8de079ba110..660b5010c2d 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -1,6 +1,8 @@ #ifndef _IF_TUNNEL_H_ #define _IF_TUNNEL_H_ +#include <linux/types.h> + #define SIOCGETTUNNEL (SIOCDEVPRIVATE + 0) #define SIOCADDTUNNEL (SIOCDEVPRIVATE + 1) #define SIOCDELTUNNEL (SIOCDEVPRIVATE + 2) diff --git a/include/linux/kvm.h b/include/linux/kvm.h index bc8b4616bad..1be148f0fce 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -46,6 +46,7 @@ enum kvm_exit_reason { KVM_EXIT_HLT = 5, KVM_EXIT_MMIO = 6, KVM_EXIT_IRQ_WINDOW_OPEN = 7, + KVM_EXIT_SHUTDOWN = 8, }; /* for KVM_RUN */ diff --git a/include/linux/libata.h b/include/linux/libata.h index ab275483032..22aa69e2090 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -177,6 +177,7 @@ enum { * Register FIS clearing BSY */ ATA_FLAG_DEBUGMSG = (1 << 13), ATA_FLAG_SETXFER_POLLING= (1 << 14), /* use polling for SETXFER */ + ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */ /* The following flag belongs to ap->pflags but is kept in * ap->flags because it's referenced in many LLDs and will be @@ -612,11 +613,11 @@ struct ata_port_operations { void (*dev_select)(struct ata_port *ap, unsigned int device); void (*phy_reset) (struct ata_port *ap); /* obsolete */ - void (*set_mode) (struct ata_port *ap); + int (*set_mode) (struct ata_port *ap, struct ata_device **r_failed_dev); void (*post_set_mode) (struct ata_port *ap); - int (*check_atapi_dma) (struct ata_queued_cmd *qc); + int (*check_atapi_dma) (struct ata_queued_cmd *qc); void (*bmdma_setup) (struct ata_queued_cmd *qc); void (*bmdma_start) (struct ata_queued_cmd *qc); @@ -1143,12 +1144,15 @@ static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf) static inline void ata_qc_reinit(struct ata_queued_cmd *qc) { + qc->dma_dir = DMA_NONE; qc->__sg = NULL; qc->flags = 0; qc->cursect = qc->cursg = qc->cursg_ofs = 0; qc->nsect = 0; qc->nbytes = qc->curbytes = 0; + qc->n_elem = 0; qc->err_mask = 0; + qc->pad_len = 0; ata_tf_init(qc->dev, &qc->tf); diff --git a/include/linux/list.h b/include/linux/list.h index a9c90287c0f..611059d633f 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -227,13 +227,13 @@ static inline void list_replace_init(struct list_head *old, INIT_LIST_HEAD(old); } -/* +/** * list_replace_rcu - replace old entry by new one * @old : the element to be replaced * @new : the new element to insert * - * The old entry will be replaced with the new entry atomically. - * Note: 'old' should not be empty. + * The @old entry will be replaced with the @new entry atomically. + * Note: @old should not be empty. */ static inline void list_replace_rcu(struct list_head *old, struct list_head *new) @@ -680,12 +680,12 @@ static inline void hlist_del_init(struct hlist_node *n) } } -/* +/** * hlist_replace_rcu - replace old entry by new one * @old : the element to be replaced * @new : the new element to insert * - * The old entry will be replaced with the new entry atomically. + * The @old entry will be replaced with the @new entry atomically. */ static inline void hlist_replace_rcu(struct hlist_node *old, struct hlist_node *new) diff --git a/include/linux/mm.h b/include/linux/mm.h index 76912231af4..2d2c08d5f47 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -168,6 +168,7 @@ extern unsigned int kobjsize(const void *objp); #define VM_NONLINEAR 0x00800000 /* Is non-linear (remap_file_pages) */ #define VM_MAPPED_COPY 0x01000000 /* T if mapped copy of data (nommu mmap) */ #define VM_INSERTPAGE 0x02000000 /* The vma has had "vm_insert_page()" done on it */ +#define VM_ALWAYSDUMP 0x04000000 /* Always include in core dumps */ #ifndef VM_STACK_DEFAULT_FLAGS /* arch can override this */ #define VM_STACK_DEFAULT_FLAGS VM_DATA_DEFAULT_FLAGS diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h index a3594dfd696..bcf24909d67 100644 --- a/include/linux/mmc/mmc.h +++ b/include/linux/mmc/mmc.h @@ -42,7 +42,7 @@ struct mmc_command { #define MMC_RSP_R1B (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY) #define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC) #define MMC_RSP_R3 (MMC_RSP_PRESENT) -#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC) +#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE) #define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE)) diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h index 72fc68c5ee9..9a6e2f953cb 100644 --- a/include/linux/mtd/blktrans.h +++ b/include/linux/mtd/blktrans.h @@ -24,7 +24,6 @@ struct mtd_blktrans_dev { struct mtd_info *mtd; struct mutex lock; int devnum; - int blksize; unsigned long size; int readonly; void *blkcore_priv; /* gendisk in 2.5, devfs_handle in 2.4 */ @@ -36,6 +35,8 @@ struct mtd_blktrans_ops { char *name; int major; int part_bits; + int blksize; + int blkshift; /* Access functions */ int (*readsect)(struct mtd_blktrans_dev *dev, diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 94a443d4525..d644e57703a 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -23,7 +23,7 @@ #define MTD_CHAR_MAJOR 90 #define MTD_BLOCK_MAJOR 31 -#define MAX_MTD_DEVICES 16 +#define MAX_MTD_DEVICES 32 #define MTD_ERASE_PENDING 0x01 #define MTD_ERASING 0x02 @@ -75,15 +75,12 @@ typedef enum { * struct mtd_oob_ops - oob operation operands * @mode: operation mode * - * @len: number of bytes to write/read. When a data buffer is given - * (datbuf != NULL) this is the number of data bytes. When - * no data buffer is available this is the number of oob bytes. + * @len: number of data bytes to write/read * - * @retlen: number of bytes written/read. When a data buffer is given - * (datbuf != NULL) this is the number of data bytes. When - * no data buffer is available this is the number of oob bytes. + * @retlen: number of data bytes written/read * - * @ooblen: number of oob bytes per page + * @ooblen: number of oob bytes to write/read + * @oobretlen: number of oob bytes written/read * @ooboffs: offset of oob data in the oob area (only relevant when * mode = MTD_OOB_PLACE) * @datbuf: data buffer - if NULL only oob data are read/written @@ -94,6 +91,7 @@ struct mtd_oob_ops { size_t len; size_t retlen; size_t ooblen; + size_t oobretlen; uint32_t ooboffs; uint8_t *datbuf; uint8_t *oobbuf; @@ -202,11 +200,20 @@ struct mtd_info { /* ECC status information */ struct mtd_ecc_stats ecc_stats; + /* Subpage shift (NAND) */ + int subpage_sft; void *priv; struct module *owner; int usecount; + + /* If the driver is something smart, like UBI, it may need to maintain + * its own reference counting. The below functions are only for driver. + * The driver may register its callbacks. These callbacks are not + * supposed to be called by MTD users */ + int (*get_device) (struct mtd_info *mtd); + void (*put_device) (struct mtd_info *mtd); }; @@ -216,6 +223,7 @@ extern int add_mtd_device(struct mtd_info *mtd); extern int del_mtd_device (struct mtd_info *mtd); extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); +extern struct mtd_info *get_mtd_device_nm(const char *name); extern void put_mtd_device(struct mtd_info *mtd); diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 8b3ef418721..2071b02f052 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -166,6 +166,9 @@ typedef enum { * for all large page devices, as they do not support * autoincrement.*/ #define NAND_NO_READRDY 0x00000100 +/* Chip does not allow subpage writes */ +#define NAND_NO_SUBPAGE_WRITE 0x00000200 + /* Options valid for Samsung large page devices */ #define NAND_SAMSUNG_LP_OPTIONS \ @@ -193,6 +196,9 @@ typedef enum { /* Nand scan has allocated controller struct */ #define NAND_CONTROLLER_ALLOC 0x80000000 +/* Cell info constants */ +#define NAND_CI_CHIPNR_MSK 0x03 +#define NAND_CI_CELLTYPE_MSK 0x0C /* * nand_state_t - chip states @@ -286,9 +292,7 @@ struct nand_ecc_ctrl { * struct nand_buffers - buffer structure for read/write * @ecccalc: buffer for calculated ecc * @ecccode: buffer for ecc read from flash - * @oobwbuf: buffer for write oob data * @databuf: buffer for data - dynamically sized - * @oobrbuf: buffer to read oob data * * Do not change the order of buffers. databuf and oobrbuf must be in * consecutive order. @@ -296,9 +300,7 @@ struct nand_ecc_ctrl { struct nand_buffers { uint8_t ecccalc[NAND_MAX_OOBSIZE]; uint8_t ecccode[NAND_MAX_OOBSIZE]; - uint8_t oobwbuf[NAND_MAX_OOBSIZE]; - uint8_t databuf[NAND_MAX_PAGESIZE]; - uint8_t oobrbuf[NAND_MAX_OOBSIZE]; + uint8_t databuf[NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE]; }; /** @@ -345,6 +347,7 @@ struct nand_buffers { * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf + * @subpagesize: [INTERN] holds the subpagesize * @ecclayout: [REPLACEABLE] the default ecc placement scheme * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup @@ -392,6 +395,8 @@ struct nand_chip { unsigned long chipsize; int pagemask; int pagebuf; + int subpagesize; + uint8_t cellinfo; int badblockpos; nand_state_t state; diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 6f045b586e7..f775a7af389 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -13,6 +13,7 @@ #define __LINUX_MTD_ONENAND_H #include <linux/spinlock.h> +#include <linux/completion.h> #include <linux/mtd/onenand_regs.h> #include <linux/mtd/bbm.h> @@ -33,7 +34,6 @@ typedef enum { FL_WRITING, FL_ERASING, FL_SYNCING, - FL_UNLOCKING, FL_LOCKING, FL_RESETING, FL_OTPING, @@ -88,6 +88,7 @@ struct onenand_bufferram { * operation is in progress * @state: [INTERN] the current state of the OneNAND device * @page_buf: data buffer + * @subpagesize: [INTERN] holds the subpagesize * @ecclayout: [REPLACEABLE] the default ecc placement scheme * @bbm: [REPLACEABLE] pointer to Bad Block Management * @priv: [OPTIONAL] pointer to private chip date @@ -120,11 +121,15 @@ struct onenand_chip { int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); int (*scan_bbt)(struct mtd_info *mtd); + struct completion complete; + int irq; + spinlock_t chip_lock; wait_queue_head_t wq; onenand_state_t state; unsigned char *page_buf; + int subpagesize; struct nand_ecclayout *ecclayout; void *bbm; @@ -138,6 +143,7 @@ struct onenand_chip { #define ONENAND_CURRENT_BUFFERRAM(this) (this->bufferram_index) #define ONENAND_NEXT_BUFFERRAM(this) (this->bufferram_index ^ 1) #define ONENAND_SET_NEXT_BUFFERRAM(this) (this->bufferram_index ^= 1) +#define ONENAND_SET_PREV_BUFFERRAM(this) (this->bufferram_index ^= 1) #define ONENAND_GET_SYS_CFG1(this) \ (this->read_word(this->base + ONENAND_REG_SYS_CFG1)) diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h index 9e409fe6ded..e31c8f5d427 100644 --- a/include/linux/mtd/onenand_regs.h +++ b/include/linux/mtd/onenand_regs.h @@ -179,6 +179,7 @@ * ECC Status Reigser FF00h (R) */ #define ONENAND_ECC_1BIT (1 << 0) +#define ONENAND_ECC_1BIT_ALL (0x5555) #define ONENAND_ECC_2BIT (1 << 1) #define ONENAND_ECC_2BIT_ALL (0xAAAA) diff --git a/include/linux/mtio.h b/include/linux/mtio.h index 8c66151821e..6f8d2d45a8f 100644 --- a/include/linux/mtio.h +++ b/include/linux/mtio.h @@ -10,7 +10,6 @@ #include <linux/types.h> #include <linux/ioctl.h> -#include <linux/qic117.h> /* * Structures and definitions for mag tape io control commands @@ -116,32 +115,6 @@ struct mtget { #define MT_ISFTAPE_UNKNOWN 0x800000 /* obsolete */ #define MT_ISFTAPE_FLAG 0x800000 -struct mt_tape_info { - long t_type; /* device type id (mt_type) */ - char *t_name; /* descriptive name */ -}; - -#define MT_TAPE_INFO { \ - {MT_ISUNKNOWN, "Unknown type of tape device"}, \ - {MT_ISQIC02, "Generic QIC-02 tape streamer"}, \ - {MT_ISWT5150, "Wangtek 5150, QIC-150"}, \ - {MT_ISARCHIVE_5945L2, "Archive 5945L-2"}, \ - {MT_ISCMSJ500, "CMS Jumbo 500"}, \ - {MT_ISTDC3610, "Tandberg TDC 3610, QIC-24"}, \ - {MT_ISARCHIVE_VP60I, "Archive VP60i, QIC-02"}, \ - {MT_ISARCHIVE_2150L, "Archive Viper 2150L"}, \ - {MT_ISARCHIVE_2060L, "Archive Viper 2060L"}, \ - {MT_ISARCHIVESC499, "Archive SC-499 QIC-36 controller"}, \ - {MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \ - {MT_ISWT5099EEN24, "Wangtek 5099-een24, 60MB"}, \ - {MT_ISTEAC_MT2ST, "Teac MT-2ST 155mb data cassette drive"}, \ - {MT_ISEVEREX_FT40A, "Everex FT40A, QIC-40"}, \ - {MT_ISONSTREAM_SC, "OnStream SC-, DI-, DP-, or USB tape drive"}, \ - {MT_ISSCSI1, "Generic SCSI-1 tape"}, \ - {MT_ISSCSI2, "Generic SCSI-2 tape"}, \ - {0, NULL} \ -} - /* structure for MTIOCPOS - mag tape get position command */ @@ -150,130 +123,11 @@ struct mtpos { }; -/* structure for MTIOCVOLINFO, query information about the volume - * currently positioned at (zftape) - */ -struct mtvolinfo { - unsigned int mt_volno; /* vol-number */ - unsigned int mt_blksz; /* blocksize used when recording */ - unsigned int mt_rawsize; /* raw tape space consumed, in kb */ - unsigned int mt_size; /* volume size after decompression, in kb */ - unsigned int mt_cmpr:1; /* this volume has been compressed */ -}; - -/* raw access to a floppy drive, read and write an arbitrary segment. - * For ftape/zftape to support formatting etc. - */ -#define MT_FT_RD_SINGLE 0 -#define MT_FT_RD_AHEAD 1 -#define MT_FT_WR_ASYNC 0 /* start tape only when all buffers are full */ -#define MT_FT_WR_MULTI 1 /* start tape, continue until buffers are empty */ -#define MT_FT_WR_SINGLE 2 /* write a single segment and stop afterwards */ -#define MT_FT_WR_DELETE 3 /* write deleted data marks, one segment at time */ - -struct mtftseg -{ - unsigned mt_segno; /* the segment to read or write */ - unsigned mt_mode; /* modes for read/write (sync/async etc.) */ - int mt_result; /* result of r/w request, not of the ioctl */ - void __user *mt_data; /* User space buffer: must be 29kb */ -}; - -/* get tape capacity (ftape/zftape) - */ -struct mttapesize { - unsigned long mt_capacity; /* entire, uncompressed capacity - * of a cartridge - */ - unsigned long mt_used; /* what has been used so far, raw - * uncompressed amount - */ -}; - -/* possible values of the ftfmt_op field - */ -#define FTFMT_SET_PARMS 1 /* set software parms */ -#define FTFMT_GET_PARMS 2 /* get software parms */ -#define FTFMT_FORMAT_TRACK 3 /* start formatting a tape track */ -#define FTFMT_STATUS 4 /* monitor formatting a tape track */ -#define FTFMT_VERIFY 5 /* verify the given segment */ - -struct ftfmtparms { - unsigned char ft_qicstd; /* QIC-40/QIC-80/QIC-3010/QIC-3020 */ - unsigned char ft_fmtcode; /* Refer to the QIC specs */ - unsigned char ft_fhm; /* floppy head max */ - unsigned char ft_ftm; /* floppy track max */ - unsigned short ft_spt; /* segments per track */ - unsigned short ft_tpc; /* tracks per cartridge */ -}; - -struct ftfmttrack { - unsigned int ft_track; /* track to format */ - unsigned char ft_gap3; /* size of gap3, for FORMAT_TRK */ -}; - -struct ftfmtstatus { - unsigned int ft_segment; /* segment currently being formatted */ -}; - -struct ftfmtverify { - unsigned int ft_segment; /* segment to verify */ - unsigned long ft_bsm; /* bsm as result of VERIFY cmd */ -}; - -struct mtftformat { - unsigned int fmt_op; /* operation to perform */ - union fmt_arg { - struct ftfmtparms fmt_parms; /* format parameters */ - struct ftfmttrack fmt_track; /* ctrl while formatting */ - struct ftfmtstatus fmt_status; - struct ftfmtverify fmt_verify; /* for verifying */ - } fmt_arg; -}; - -struct mtftcmd { - unsigned int ft_wait_before; /* timeout to wait for drive to get ready - * before command is sent. Milliseconds - */ - qic117_cmd_t ft_cmd; /* command to send */ - unsigned char ft_parm_cnt; /* zero: no parm is sent. */ - unsigned char ft_parms[3]; /* parameter(s) to send to - * the drive. The parms are nibbles - * driver sends cmd + 2 step pulses */ - unsigned int ft_result_bits; /* if non zero, number of bits - * returned by the tape drive - */ - unsigned int ft_result; /* the result returned by the tape drive*/ - unsigned int ft_wait_after; /* timeout to wait for drive to get ready - * after command is sent. 0: don't wait */ - int ft_status; /* status returned by ready wait - * undefined if timeout was 0. - */ - int ft_error; /* error code if error status was set by - * command - */ -}; - /* mag tape io control commands */ #define MTIOCTOP _IOW('m', 1, struct mtop) /* do a mag tape op */ #define MTIOCGET _IOR('m', 2, struct mtget) /* get tape status */ #define MTIOCPOS _IOR('m', 3, struct mtpos) /* get tape position */ -/* The next two are used by the QIC-02 driver for runtime reconfiguration. - * See tpqic02.h for struct mtconfiginfo. - */ -#define MTIOCGETCONFIG _IOR('m', 4, struct mtconfiginfo) /* get tape config */ -#define MTIOCSETCONFIG _IOW('m', 5, struct mtconfiginfo) /* set tape config */ - -/* the next six are used by the floppy ftape drivers and its frontends - * sorry, but MTIOCTOP commands are write only. - */ -#define MTIOCRDFTSEG _IOWR('m', 6, struct mtftseg) /* read a segment */ -#define MTIOCWRFTSEG _IOWR('m', 7, struct mtftseg) /* write a segment */ -#define MTIOCVOLINFO _IOR('m', 8, struct mtvolinfo) /* info about volume */ -#define MTIOCGETSIZE _IOR('m', 9, struct mttapesize)/* get cartridge size*/ -#define MTIOCFTFORMAT _IOWR('m', 10, struct mtftformat) /* format ftape */ -#define MTIOCFTCMD _IOWR('m', 11, struct mtftcmd) /* send QIC-117 cmd */ /* Generic Mag Tape (device independent) status macros for examining * mt_gstat -- HP-UX compatible. diff --git a/include/linux/mutex.h b/include/linux/mutex.h index a7544afd758..b81bc2adaef 100644 --- a/include/linux/mutex.h +++ b/include/linux/mutex.h @@ -105,7 +105,7 @@ do { \ extern void __mutex_init(struct mutex *lock, const char *name, struct lock_class_key *key); -/*** +/** * mutex_is_locked - is the mutex locked * @lock: the mutex to be queried * diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h index 4f06dad0bde..98d566c5e32 100644 --- a/include/linux/netfilter_ipv4/ip_tables.h +++ b/include/linux/netfilter_ipv4/ip_tables.h @@ -28,7 +28,7 @@ #include <linux/netfilter/x_tables.h> #define IPT_FUNCTION_MAXNAMELEN XT_FUNCTION_MAXNAMELEN -#define IPT_TABLE_MAXNAMELEN XT_FUNCTION_MAXNAMELEN +#define IPT_TABLE_MAXNAMELEN XT_TABLE_MAXNAMELEN #define ipt_match xt_match #define ipt_target xt_target #define ipt_table xt_table diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 04963063e62..c5d4084773e 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -308,6 +308,7 @@ extern int nfs_attribute_timeout(struct inode *inode); extern int nfs_revalidate_inode(struct nfs_server *server, struct inode *inode); extern int __nfs_revalidate_inode(struct nfs_server *, struct inode *); extern int nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping); +extern int nfs_revalidate_mapping_nolock(struct inode *inode, struct address_space *mapping); extern int nfs_setattr(struct dentry *, struct iattr *); extern void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr); extern void nfs_begin_attr_update(struct inode *); diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index 0727774772b..4b7c4b568f6 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -52,8 +52,6 @@ struct readdir_cd { __be32 err; /* 0, nfserr, or nfserr_eof */ }; -typedef int (*encode_dent_fn)(struct readdir_cd *, const char *, - int, loff_t, ino_t, unsigned int); typedef int (*nfsd_dirop_t)(struct inode *, struct dentry *, int, int); extern struct svc_program nfsd_program; @@ -117,7 +115,7 @@ __be32 nfsd_unlink(struct svc_rqst *, struct svc_fh *, int type, int nfsd_truncate(struct svc_rqst *, struct svc_fh *, unsigned long size); __be32 nfsd_readdir(struct svc_rqst *, struct svc_fh *, - loff_t *, struct readdir_cd *, encode_dent_fn); + loff_t *, struct readdir_cd *, filldir_t); __be32 nfsd_statfs(struct svc_rqst *, struct svc_fh *, struct kstatfs *); diff --git a/include/linux/nfsd/nfsfh.h b/include/linux/nfsd/nfsfh.h index f3b51d62ec7..d9c6c382165 100644 --- a/include/linux/nfsd/nfsfh.h +++ b/include/linux/nfsd/nfsfh.h @@ -217,11 +217,7 @@ void fh_put(struct svc_fh *); static __inline__ struct svc_fh * fh_copy(struct svc_fh *dst, struct svc_fh *src) { - if (src->fh_dentry || src->fh_locked) { - struct dentry *dentry = src->fh_dentry; - printk(KERN_ERR "fh_copy: copying %s/%s, already verified!\n", - dentry->d_parent->d_name.name, dentry->d_name.name); - } + WARN_ON(src->fh_dentry || src->fh_locked); *dst = *src; return dst; @@ -300,10 +296,8 @@ fh_lock_nested(struct svc_fh *fhp, unsigned int subclass) dfprintk(FILEOP, "nfsd: fh_lock(%s) locked = %d\n", SVCFH_fmt(fhp), fhp->fh_locked); - if (!fhp->fh_dentry) { - printk(KERN_ERR "fh_lock: fh not verified!\n"); - return; - } + BUG_ON(!dentry); + if (fhp->fh_locked) { printk(KERN_WARNING "fh_lock: %s/%s already locked!\n", dentry->d_parent->d_name.name, dentry->d_name.name); @@ -328,8 +322,7 @@ fh_lock(struct svc_fh *fhp) static inline void fh_unlock(struct svc_fh *fhp) { - if (!fhp->fh_dentry) - printk(KERN_ERR "fh_unlock: fh not verified!\n"); + BUG_ON(!fhp->fh_dentry); if (fhp->fh_locked) { fill_post_wcc(fhp); diff --git a/include/linux/nfsd/xdr.h b/include/linux/nfsd/xdr.h index 877192d3ae7..67885d5e6e5 100644 --- a/include/linux/nfsd/xdr.h +++ b/include/linux/nfsd/xdr.h @@ -165,8 +165,8 @@ int nfssvc_encode_readres(struct svc_rqst *, __be32 *, struct nfsd_readres *); int nfssvc_encode_statfsres(struct svc_rqst *, __be32 *, struct nfsd_statfsres *); int nfssvc_encode_readdirres(struct svc_rqst *, __be32 *, struct nfsd_readdirres *); -int nfssvc_encode_entry(struct readdir_cd *, const char *name, - int namlen, loff_t offset, ino_t ino, unsigned int); +int nfssvc_encode_entry(void *, const char *name, + int namlen, loff_t offset, u64 ino, unsigned int); int nfssvc_release_fhandle(struct svc_rqst *, __be32 *, struct nfsd_fhandle *); diff --git a/include/linux/nfsd/xdr3.h b/include/linux/nfsd/xdr3.h index 79963867b0d..89d9d6061a6 100644 --- a/include/linux/nfsd/xdr3.h +++ b/include/linux/nfsd/xdr3.h @@ -331,11 +331,11 @@ int nfs3svc_release_fhandle(struct svc_rqst *, __be32 *, struct nfsd3_attrstat *); int nfs3svc_release_fhandle2(struct svc_rqst *, __be32 *, struct nfsd3_fhandle_pair *); -int nfs3svc_encode_entry(struct readdir_cd *, const char *name, - int namlen, loff_t offset, ino_t ino, +int nfs3svc_encode_entry(void *, const char *name, + int namlen, loff_t offset, u64 ino, unsigned int); -int nfs3svc_encode_entry_plus(struct readdir_cd *, const char *name, - int namlen, loff_t offset, ino_t ino, +int nfs3svc_encode_entry_plus(void *, const char *name, + int namlen, loff_t offset, u64 ino, unsigned int); /* Helper functions for NFSv3 ACL code */ __be32 *nfs3svc_encode_post_op_attr(struct svc_rqst *rqstp, __be32 *p, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index f7a416c52ed..3d1d21035de 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1277,13 +1277,13 @@ #define PCI_DEVICE_ID_VIA_3296_0 0x0296 #define PCI_DEVICE_ID_VIA_8363_0 0x0305 #define PCI_DEVICE_ID_VIA_P4M800CE 0x0314 -#define PCI_DEVICE_ID_VIA_K8M890CE 0x0336 +#define PCI_DEVICE_ID_VIA_P4M890 0x0327 +#define PCI_DEVICE_ID_VIA_VT3336 0x0336 #define PCI_DEVICE_ID_VIA_8371_0 0x0391 #define PCI_DEVICE_ID_VIA_8501_0 0x0501 #define PCI_DEVICE_ID_VIA_82C561 0x0561 #define PCI_DEVICE_ID_VIA_82C586_1 0x0571 #define PCI_DEVICE_ID_VIA_82C576 0x0576 -#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x0581 #define PCI_DEVICE_ID_VIA_82C586_0 0x0586 #define PCI_DEVICE_ID_VIA_82C596 0x0596 #define PCI_DEVICE_ID_VIA_82C597_0 0x0597 @@ -1326,6 +1326,8 @@ #define PCI_DEVICE_ID_VIA_8237 0x3227 #define PCI_DEVICE_ID_VIA_8251 0x3287 #define PCI_DEVICE_ID_VIA_8237A 0x3337 +#define PCI_DEVICE_ID_VIA_8237S 0x3372 +#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324 #define PCI_DEVICE_ID_VIA_8231 0x8231 #define PCI_DEVICE_ID_VIA_8231_4 0x8235 #define PCI_DEVICE_ID_VIA_8365_1 0x8305 diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index d2a9d419f01..2833806d42c 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -39,7 +39,7 @@ static inline void put_pid_ns(struct pid_namespace *ns) static inline struct task_struct *child_reaper(struct task_struct *tsk) { - return tsk->nsproxy->pid_ns->child_reaper; + return init_pid_ns.child_reaper; } #endif /* _LINUX_PID_NS_H */ diff --git a/include/linux/qic117.h b/include/linux/qic117.h deleted file mode 100644 index 07b537e5d35..00000000000 --- a/include/linux/qic117.h +++ /dev/null @@ -1,290 +0,0 @@ -#ifndef _QIC117_H -#define _QIC117_H - -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * $Source: /homes/cvs/ftape-stacked/include/linux/qic117.h,v $ - * $Revision: 1.2 $ - * $Date: 1997/10/05 19:19:32 $ - * - * This file contains QIC-117 spec. related definitions for the - * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. - * - * These data were taken from the Quarter-Inch Cartridge - * Drive Standards, Inc. document titled: - * `Common Command Set Interface Specification for Flexible - * Disk Controller Based Minicartridge Tape Drives' - * document QIC-117 Revision J, 28 Aug 96. - * For more information, contact: - * Quarter-Inch Cartridge Drive Standards, Inc. - * 311 East Carrillo Street - * Santa Barbara, California 93101 - * Telephone (805) 963-3853 - * Fax (805) 962-1541 - * WWW http://www.qic.org - * - * Current QIC standard revisions (of interest) are: - * QIC-40-MC, Rev. M, 2 Sep 92. - * QIC-80-MC, Rev. N, 20 Mar 96. - * QIC-80-MC, Rev. K, 15 Dec 94. - * QIC-113, Rev. G, 15 Jun 95. - * QIC-117, Rev. J, 28 Aug 96. - * QIC-122, Rev. B, 6 Mar 91. - * QIC-130, Rev. C, 2 Sep 92. - * QIC-3010-MC, Rev. F, 14 Jun 95. - * QIC-3020-MC, Rev. G, 31 Aug 95. - * QIC-CRF3, Rev. B, 15 Jun 95. - * */ - -/* - * QIC-117 common command set rev. J. - * These commands are sent to the tape unit - * as number of pulses over the step line. - */ - -typedef enum { - QIC_NO_COMMAND = 0, - QIC_RESET = 1, - QIC_REPORT_NEXT_BIT = 2, - QIC_PAUSE = 3, - QIC_MICRO_STEP_PAUSE = 4, - QIC_ALTERNATE_TIMEOUT = 5, - QIC_REPORT_DRIVE_STATUS = 6, - QIC_REPORT_ERROR_CODE = 7, - QIC_REPORT_DRIVE_CONFIGURATION = 8, - QIC_REPORT_ROM_VERSION = 9, - QIC_LOGICAL_FORWARD = 10, - QIC_PHYSICAL_REVERSE = 11, - QIC_PHYSICAL_FORWARD = 12, - QIC_SEEK_HEAD_TO_TRACK = 13, - QIC_SEEK_LOAD_POINT = 14, - QIC_ENTER_FORMAT_MODE = 15, - QIC_WRITE_REFERENCE_BURST = 16, - QIC_ENTER_VERIFY_MODE = 17, - QIC_STOP_TAPE = 18, -/* commands 19-20: reserved */ - QIC_MICRO_STEP_HEAD_UP = 21, - QIC_MICRO_STEP_HEAD_DOWN = 22, - QIC_SOFT_SELECT = 23, - QIC_SOFT_DESELECT = 24, - QIC_SKIP_REVERSE = 25, - QIC_SKIP_FORWARD = 26, - QIC_SELECT_RATE = 27, -/* command 27, in ccs2: Select Rate or Format */ - QIC_ENTER_DIAGNOSTIC_1 = 28, - QIC_ENTER_DIAGNOSTIC_2 = 29, - QIC_ENTER_PRIMARY_MODE = 30, -/* command 31: vendor unique */ - QIC_REPORT_VENDOR_ID = 32, - QIC_REPORT_TAPE_STATUS = 33, - QIC_SKIP_EXTENDED_REVERSE = 34, - QIC_SKIP_EXTENDED_FORWARD = 35, - QIC_CALIBRATE_TAPE_LENGTH = 36, - QIC_REPORT_FORMAT_SEGMENTS = 37, - QIC_SET_FORMAT_SEGMENTS = 38, -/* commands 39-45: reserved */ - QIC_PHANTOM_SELECT = 46, - QIC_PHANTOM_DESELECT = 47 -} qic117_cmd_t; - -typedef enum { - discretional = 0, required, ccs1, ccs2 -} qic_compatibility; - -typedef enum { - unused, mode, motion, report -} command_types; - -struct qic117_command_table { - char *name; - __u8 mask; - __u8 state; - __u8 cmd_type; - __u8 non_intr; - __u8 level; -}; - -#define QIC117_COMMANDS {\ -/* command mask state cmd_type */\ -/* | name | | | non_intr */\ -/* | | | | | | level */\ -/* 0*/ {NULL, 0x00, 0x00, mode, 0, discretional},\ -/* 1*/ {"soft reset", 0x00, 0x00, motion, 1, required},\ -/* 2*/ {"report next bit", 0x00, 0x00, report, 0, required},\ -/* 3*/ {"pause", 0x36, 0x24, motion, 1, required},\ -/* 4*/ {"micro step pause", 0x36, 0x24, motion, 1, required},\ -/* 5*/ {"alternate command timeout", 0x00, 0x00, mode, 0, required},\ -/* 6*/ {"report drive status", 0x00, 0x00, report, 0, required},\ -/* 7*/ {"report error code", 0x01, 0x01, report, 0, required},\ -/* 8*/ {"report drive configuration",0x00, 0x00, report, 0, required},\ -/* 9*/ {"report rom version", 0x00, 0x00, report, 0, required},\ -/*10*/ {"logical forward", 0x37, 0x25, motion, 0, required},\ -/*11*/ {"physical reverse", 0x17, 0x05, motion, 0, required},\ -/*12*/ {"physical forward", 0x17, 0x05, motion, 0, required},\ -/*13*/ {"seek head to track", 0x37, 0x25, motion, 0, required},\ -/*14*/ {"seek load point", 0x17, 0x05, motion, 1, required},\ -/*15*/ {"enter format mode", 0x1f, 0x05, mode, 0, required},\ -/*16*/ {"write reference burst", 0x1f, 0x05, motion, 1, required},\ -/*17*/ {"enter verify mode", 0x37, 0x25, mode, 0, required},\ -/*18*/ {"stop tape", 0x00, 0x00, motion, 1, required},\ -/*19*/ {"reserved (19)", 0x00, 0x00, unused, 0, discretional},\ -/*20*/ {"reserved (20)", 0x00, 0x00, unused, 0, discretional},\ -/*21*/ {"micro step head up", 0x02, 0x00, motion, 0, required},\ -/*22*/ {"micro step head down", 0x02, 0x00, motion, 0, required},\ -/*23*/ {"soft select", 0x00, 0x00, mode, 0, discretional},\ -/*24*/ {"soft deselect", 0x00, 0x00, mode, 0, discretional},\ -/*25*/ {"skip segments reverse", 0x36, 0x24, motion, 1, required},\ -/*26*/ {"skip segments forward", 0x36, 0x24, motion, 1, required},\ -/*27*/ {"select rate or format", 0x03, 0x01, mode, 0, required /* [ccs2] */},\ -/*28*/ {"enter diag mode 1", 0x00, 0x00, mode, 0, discretional},\ -/*29*/ {"enter diag mode 2", 0x00, 0x00, mode, 0, discretional},\ -/*30*/ {"enter primary mode", 0x00, 0x00, mode, 0, required},\ -/*31*/ {"vendor unique (31)", 0x00, 0x00, unused, 0, discretional},\ -/*32*/ {"report vendor id", 0x00, 0x00, report, 0, required},\ -/*33*/ {"report tape status", 0x04, 0x04, report, 0, ccs1},\ -/*34*/ {"skip extended reverse", 0x36, 0x24, motion, 1, ccs1},\ -/*35*/ {"skip extended forward", 0x36, 0x24, motion, 1, ccs1},\ -/*36*/ {"calibrate tape length", 0x17, 0x05, motion, 1, ccs2},\ -/*37*/ {"report format segments", 0x17, 0x05, report, 0, ccs2},\ -/*38*/ {"set format segments", 0x17, 0x05, mode, 0, ccs2},\ -/*39*/ {"reserved (39)", 0x00, 0x00, unused, 0, discretional},\ -/*40*/ {"vendor unique (40)", 0x00, 0x00, unused, 0, discretional},\ -/*41*/ {"vendor unique (41)", 0x00, 0x00, unused, 0, discretional},\ -/*42*/ {"vendor unique (42)", 0x00, 0x00, unused, 0, discretional},\ -/*43*/ {"vendor unique (43)", 0x00, 0x00, unused, 0, discretional},\ -/*44*/ {"vendor unique (44)", 0x00, 0x00, unused, 0, discretional},\ -/*45*/ {"vendor unique (45)", 0x00, 0x00, unused, 0, discretional},\ -/*46*/ {"phantom select", 0x00, 0x00, mode, 0, discretional},\ -/*47*/ {"phantom deselect", 0x00, 0x00, mode, 0, discretional},\ -} - -/* - * Status bits returned by QIC_REPORT_DRIVE_STATUS - */ - -#define QIC_STATUS_READY 0x01 /* Drive is ready or idle. */ -#define QIC_STATUS_ERROR 0x02 /* Error detected, must read - error code to clear this */ -#define QIC_STATUS_CARTRIDGE_PRESENT 0x04 /* Tape is present */ -#define QIC_STATUS_WRITE_PROTECT 0x08 /* Tape is write protected */ -#define QIC_STATUS_NEW_CARTRIDGE 0x10 /* New cartridge inserted, must - read error status to clear. */ -#define QIC_STATUS_REFERENCED 0x20 /* Cartridge appears to have been - formatted. */ -#define QIC_STATUS_AT_BOT 0x40 /* Cartridge is at physical - beginning of tape. */ -#define QIC_STATUS_AT_EOT 0x80 /* Cartridge is at physical end - of tape. */ -/* - * Status bits returned by QIC_REPORT_DRIVE_CONFIGURATION - */ - -#define QIC_CONFIG_RATE_MASK 0x18 -#define QIC_CONFIG_RATE_SHIFT 3 -#define QIC_CONFIG_RATE_250 0 -#define QIC_CONFIG_RATE_500 2 -#define QIC_CONFIG_RATE_1000 3 -#define QIC_CONFIG_RATE_2000 1 -#define QIC_CONFIG_RATE_4000 0 /* since QIC-117 Rev. J */ - -#define QIC_CONFIG_LONG 0x40 /* Extra Length Tape Detected */ -#define QIC_CONFIG_80 0x80 /* QIC-80 detected. */ - -/* - * Status bits returned by QIC_REPORT_TAPE_STATUS - */ - -#define QIC_TAPE_STD_MASK 0x0f -#define QIC_TAPE_QIC40 0x01 -#define QIC_TAPE_QIC80 0x02 -#define QIC_TAPE_QIC3020 0x03 -#define QIC_TAPE_QIC3010 0x04 - -#define QIC_TAPE_LEN_MASK 0x70 -#define QIC_TAPE_205FT 0x10 -#define QIC_TAPE_307FT 0x20 -#define QIC_TAPE_VARIABLE 0x30 -#define QIC_TAPE_1100FT 0x40 -#define QIC_TAPE_FLEX 0x60 - -#define QIC_TAPE_WIDE 0x80 - -/* Define a value (in feet) slightly higher than - * the possible maximum tape length. - */ -#define QIC_TOP_TAPE_LEN 1500 - -/* - * Errors: List of error codes, and their severity. - */ - -typedef struct { - char *message; /* Text describing the error. */ - unsigned int fatal:1; /* Non-zero if the error is fatal. */ -} ftape_error; - -#define QIC117_ERRORS {\ - /* 0*/ { "No error", 0, },\ - /* 1*/ { "Command Received while Drive Not Ready", 0, },\ - /* 2*/ { "Cartridge Not Present or Removed", 1, },\ - /* 3*/ { "Motor Speed Error (not within 1%)", 1, },\ - /* 4*/ { "Motor Speed Fault (jammed, or gross speed error", 1, },\ - /* 5*/ { "Cartridge Write Protected", 1, },\ - /* 6*/ { "Undefined or Reserved Command Code", 1, },\ - /* 7*/ { "Illegal Track Address Specified for Seek", 1, },\ - /* 8*/ { "Illegal Command in Report Subcontext", 0, },\ - /* 9*/ { "Illegal Entry into a Diagnostic Mode", 1, },\ - /*10*/ { "Broken Tape Detected (based on hole sensor)", 1, },\ - /*11*/ { "Warning--Read Gain Setting Error", 1, },\ - /*12*/ { "Command Received While Error Status Pending (obs)", 1, },\ - /*13*/ { "Command Received While New Cartridge Pending", 1, },\ - /*14*/ { "Command Illegal or Undefined in Primary Mode", 1, },\ - /*15*/ { "Command Illegal or Undefined in Format Mode", 1, },\ - /*16*/ { "Command Illegal or Undefined in Verify Mode", 1, },\ - /*17*/ { "Logical Forward Not at Logical BOT or no Format Segments in Format Mode", 1, },\ - /*18*/ { "Logical EOT Before All Segments generated", 1, },\ - /*19*/ { "Command Illegal When Cartridge Not Referenced", 1, },\ - /*20*/ { "Self-Diagnostic Failed (cannot be cleared)", 1, },\ - /*21*/ { "Warning EEPROM Not Initialized, Defaults Set", 1, },\ - /*22*/ { "EEPROM Corrupted or Hardware Failure", 1, },\ - /*23*/ { "Motion Time-out Error", 1, },\ - /*24*/ { "Data Segment Too Long -- Logical Forward or Pause", 1, },\ - /*25*/ { "Transmit Overrun (obs)", 1, },\ - /*26*/ { "Power On Reset Occurred", 0, },\ - /*27*/ { "Software Reset Occurred", 0, },\ - /*28*/ { "Diagnostic Mode 1 Error", 1, },\ - /*29*/ { "Diagnostic Mode 2 Error", 1, },\ - /*30*/ { "Command Received During Non-Interruptible Process", 1, },\ - /*31*/ { "Rate or Format Selection Error", 1, },\ - /*32*/ { "Illegal Command While in High Speed Mode", 1, },\ - /*33*/ { "Illegal Seek Segment Value", 1, },\ - /*34*/ { "Invalid Media", 1, },\ - /*35*/ { "Head Positioning Failure", 1, },\ - /*36*/ { "Write Reference Burst Failure", 1, },\ - /*37*/ { "Prom Code Missing", 1, },\ - /*38*/ { "Invalid Format", 1, },\ - /*39*/ { "EOT/BOT System Failure", 1, },\ - /*40*/ { "Prom A Checksum Error", 1, },\ - /*41*/ { "Drive Wakeup Reset Occurred", 1, },\ - /*42*/ { "Prom B Checksum Error", 1, },\ - /*43*/ { "Illegal Entry into Format Mode", 1, },\ -} - -#endif /* _QIC117_H */ diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h index 866a1e2b0ce..fbaeda79b2e 100644 --- a/include/linux/raid/md.h +++ b/include/linux/raid/md.h @@ -94,7 +94,7 @@ extern int sync_page_io(struct block_device *bdev, sector_t sector, int size, struct page *page, int rw); extern void md_do_sync(mddev_t *mddev); extern void md_new_event(mddev_t *mddev); - +extern void md_allow_write(mddev_t *mddev); #endif /* CONFIG_MD */ #endif diff --git a/include/linux/reiserfs_fs_i.h b/include/linux/reiserfs_fs_i.h index 5b3b297aa2c..ce3663fb010 100644 --- a/include/linux/reiserfs_fs_i.h +++ b/include/linux/reiserfs_fs_i.h @@ -25,6 +25,7 @@ typedef enum { i_link_saved_truncate_mask = 0x0020, i_has_xattr_dir = 0x0040, i_data_log = 0x0080, + i_ever_mapped = 0x0100 } reiserfs_inode_flags; struct reiserfs_inode_info { @@ -52,6 +53,7 @@ struct reiserfs_inode_info { ** flushed */ unsigned long i_trans_id; struct reiserfs_journal_list *i_jl; + struct mutex i_mmap; #ifdef CONFIG_REISERFS_FS_POSIX_ACL struct posix_acl *i_acl_access; struct posix_acl *i_acl_default; diff --git a/include/linux/rtmutex.h b/include/linux/rtmutex.h index b0090e9f788..382bb795116 100644 --- a/include/linux/rtmutex.h +++ b/include/linux/rtmutex.h @@ -16,7 +16,7 @@ #include <linux/plist.h> #include <linux/spinlock_types.h> -/* +/** * The rt_mutex structure * * @wait_lock: spinlock to protect the structure @@ -71,7 +71,7 @@ struct hrtimer_sleeper; #define DEFINE_RT_MUTEX(mutexname) \ struct rt_mutex mutexname = __RT_MUTEX_INITIALIZER(mutexname) -/*** +/** * rt_mutex_is_locked - is the mutex locked * @lock: the mutex to be queried * diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index 97c76165258..8b6ce60ea05 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -250,7 +250,6 @@ void rpc_init_task(struct rpc_task *task, struct rpc_clnt *clnt, int flags, const struct rpc_call_ops *ops, void *data); void rpc_put_task(struct rpc_task *); -void rpc_release_task(struct rpc_task *); void rpc_exit_task(struct rpc_task *); void rpc_release_calldata(const struct rpc_call_ops *, void *); void rpc_killall_tasks(struct rpc_clnt *); diff --git a/include/linux/sunrpc/svc.h b/include/linux/sunrpc/svc.h index 965d6c20086..64f3d60c72a 100644 --- a/include/linux/sunrpc/svc.h +++ b/include/linux/sunrpc/svc.h @@ -144,8 +144,11 @@ extern u32 svc_max_payload(const struct svc_rqst *rqstp); * * Each request/reply pair can have at most one "payload", plus two pages, * one for the request, and one for the reply. + * We using ->sendfile to return read data, we might need one extra page + * if the request is not page-aligned. So add another '1'. */ -#define RPCSVC_MAXPAGES ((RPCSVC_MAXPAYLOAD+PAGE_SIZE-1)/PAGE_SIZE + 2) +#define RPCSVC_MAXPAGES ((RPCSVC_MAXPAYLOAD+PAGE_SIZE-1)/PAGE_SIZE \ + + 2 + 1) static inline u32 svc_getnl(struct kvec *iov) { diff --git a/include/linux/timer.h b/include/linux/timer.h index eeef6643d4c..fb5edaaf0eb 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -41,7 +41,7 @@ static inline void setup_timer(struct timer_list * timer, init_timer(timer); } -/*** +/** * timer_pending - is a timer pending? * @timer: the timer in question * @@ -63,7 +63,7 @@ extern int mod_timer(struct timer_list *timer, unsigned long expires); extern unsigned long next_timer_interrupt(void); -/*** +/** * add_timer - start a timer * @timer: the timer to be added * diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 5cb380a559f..d94e2683be5 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -662,6 +662,15 @@ typedef __u64 v4l2_std_id; #define V4L2_STD_ATSC_8_VSB ((v4l2_std_id)0x01000000) #define V4L2_STD_ATSC_16_VSB ((v4l2_std_id)0x02000000) +/* FIXME: + Although std_id is 64 bits, there is an issue on PPC32 architecture that + makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding + this value to 32 bits. + As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide), + it should work fine. However, if needed to add more than two standards, + v4l2-common.c should be fixed. + */ + /* some merged standards */ #define V4L2_STD_MN (V4L2_STD_PAL_M|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc|V4L2_STD_NTSC) #define V4L2_STD_B (V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_SECAM_B) diff --git a/include/net/inet6_connection_sock.h b/include/net/inet6_connection_sock.h index 16aa96a6a53..f13ddc2543b 100644 --- a/include/net/inet6_connection_sock.h +++ b/include/net/inet6_connection_sock.h @@ -38,5 +38,5 @@ extern void inet6_csk_reqsk_queue_hash_add(struct sock *sk, extern void inet6_csk_addr2sockaddr(struct sock *sk, struct sockaddr *uaddr); -extern int inet6_csk_xmit(struct sk_buff *skb, struct sock *sk, int ipfragok); +extern int inet6_csk_xmit(struct sk_buff *skb, int ipfragok); #endif /* _INET6_CONNECTION_SOCK_H */ diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h index bf16d98d372..133cf30d2d7 100644 --- a/include/net/inet_connection_sock.h +++ b/include/net/inet_connection_sock.h @@ -37,8 +37,7 @@ struct tcp_congestion_ops; * (i.e. things that depend on the address family) */ struct inet_connection_sock_af_ops { - int (*queue_xmit)(struct sk_buff *skb, struct sock *sk, - int ipfragok); + int (*queue_xmit)(struct sk_buff *skb, int ipfragok); void (*send_check)(struct sock *sk, int len, struct sk_buff *skb); int (*rebuild_header)(struct sock *sk); diff --git a/include/net/ip.h b/include/net/ip.h index 053f02b5cb8..e79c3e3aa4f 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -97,7 +97,7 @@ extern int ip_mc_output(struct sk_buff *skb); extern int ip_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *)); extern int ip_do_nat(struct sk_buff *skb); extern void ip_send_check(struct iphdr *ip); -extern int ip_queue_xmit(struct sk_buff *skb, struct sock *sk, int ipfragok); +extern int ip_queue_xmit(struct sk_buff *skb, int ipfragok); extern void ip_init(void); extern int ip_append_data(struct sock *sk, int getfrag(void *from, char *to, int offset, int len, diff --git a/include/net/netfilter/nf_conntrack_compat.h b/include/net/netfilter/nf_conntrack_compat.h index b9ce5c80d9d..6f84c1f7fcd 100644 --- a/include/net/netfilter/nf_conntrack_compat.h +++ b/include/net/netfilter/nf_conntrack_compat.h @@ -6,6 +6,7 @@ #if defined(CONFIG_IP_NF_CONNTRACK) || defined(CONFIG_IP_NF_CONNTRACK_MODULE) #include <linux/netfilter_ipv4/ip_conntrack.h> +#include <linux/socket.h> #ifdef CONFIG_IP_NF_CONNTRACK_MARK static inline u_int32_t *nf_ct_get_mark(const struct sk_buff *skb, diff --git a/include/net/sctp/sm.h b/include/net/sctp/sm.h index 3269ed1cc22..73cb9943c8a 100644 --- a/include/net/sctp/sm.h +++ b/include/net/sctp/sm.h @@ -134,6 +134,7 @@ sctp_state_fn_t sctp_sf_violation; sctp_state_fn_t sctp_sf_discard_chunk; sctp_state_fn_t sctp_sf_do_5_2_1_siminit; sctp_state_fn_t sctp_sf_do_5_2_2_dupinit; +sctp_state_fn_t sctp_sf_do_5_2_3_initack; sctp_state_fn_t sctp_sf_do_5_2_4_dupcook; sctp_state_fn_t sctp_sf_unk_chunk; sctp_state_fn_t sctp_sf_do_8_5_1_E_sa; diff --git a/include/sound/core.h b/include/sound/core.h index a994bea09cd..521f036cce9 100644 --- a/include/sound/core.h +++ b/include/sound/core.h @@ -132,8 +132,10 @@ struct snd_card { int shutdown; /* this card is going down */ int free_on_last_close; /* free in context of file_release */ wait_queue_head_t shutdown_sleep; - struct device *parent; - struct device *dev; + struct device *dev; /* device assigned to this card */ +#ifndef CONFIG_SYSFS_DEPRECATED + struct device *card_dev; /* cardX object for sysfs */ +#endif #ifdef CONFIG_PM unsigned int power_state; /* power state */ @@ -191,6 +193,16 @@ struct snd_minor { struct device *dev; /* device for sysfs */ }; +/* return a device pointer linked to each sound device as a parent */ +static inline struct device *snd_card_get_device_link(struct snd_card *card) +{ +#ifdef CONFIG_SYSFS_DEPRECATED + return card ? card->dev : NULL; +#else + return card ? card->card_dev : NULL; +#endif +} + /* sound.c */ extern int snd_major; @@ -257,7 +269,7 @@ int snd_card_file_add(struct snd_card *card, struct file *file); int snd_card_file_remove(struct snd_card *card, struct file *file); #ifndef snd_card_set_dev -#define snd_card_set_dev(card,devptr) ((card)->parent = (devptr)) +#define snd_card_set_dev(card,devptr) ((card)->dev = (devptr)) #endif /* device.c */ |