diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/mg_disk.h | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/include/linux/mg_disk.h b/include/linux/mg_disk.h new file mode 100644 index 00000000000..1f76b1ebf62 --- /dev/null +++ b/include/linux/mg_disk.h @@ -0,0 +1,206 @@ +/* + * include/linux/mg_disk.c + * + * Support for the mGine m[g]flash IO mode. + * Based on legacy hd.c + * + * (c) 2008 mGine Co.,LTD + * (c) 2008 unsik Kim <donari75@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MG_DISK_H__ +#define __MG_DISK_H__ + +#include <linux/blkdev.h> +#include <linux/ata.h> + +/* name for block device */ +#define MG_DISK_NAME "mgd" +/* name for platform device */ +#define MG_DEV_NAME "mg_disk" + +#define MG_DISK_MAJ 0 +#define MG_DISK_MAX_PART 16 +#define MG_SECTOR_SIZE 512 +#define MG_MAX_SECTS 256 + +/* Register offsets */ +#define MG_BUFF_OFFSET 0x8000 +#define MG_STORAGE_BUFFER_SIZE 0x200 +#define MG_REG_OFFSET 0xC000 +#define MG_REG_FEATURE (MG_REG_OFFSET + 2) /* write case */ +#define MG_REG_ERROR (MG_REG_OFFSET + 2) /* read case */ +#define MG_REG_SECT_CNT (MG_REG_OFFSET + 4) +#define MG_REG_SECT_NUM (MG_REG_OFFSET + 6) +#define MG_REG_CYL_LOW (MG_REG_OFFSET + 8) +#define MG_REG_CYL_HIGH (MG_REG_OFFSET + 0xA) +#define MG_REG_DRV_HEAD (MG_REG_OFFSET + 0xC) +#define MG_REG_COMMAND (MG_REG_OFFSET + 0xE) /* write case */ +#define MG_REG_STATUS (MG_REG_OFFSET + 0xE) /* read case */ +#define MG_REG_DRV_CTRL (MG_REG_OFFSET + 0x10) +#define MG_REG_BURST_CTRL (MG_REG_OFFSET + 0x12) + +/* "Drive Select/Head Register" bit values */ +#define MG_REG_HEAD_MUST_BE_ON 0xA0 /* These 2 bits are always on */ +#define MG_REG_HEAD_DRIVE_MASTER (0x00 | MG_REG_HEAD_MUST_BE_ON) +#define MG_REG_HEAD_DRIVE_SLAVE (0x10 | MG_REG_HEAD_MUST_BE_ON) +#define MG_REG_HEAD_LBA_MODE (0x40 | MG_REG_HEAD_MUST_BE_ON) + + +/* "Device Control Register" bit values */ +#define MG_REG_CTRL_INTR_ENABLE 0x0 +#define MG_REG_CTRL_INTR_DISABLE (0x1<<1) +#define MG_REG_CTRL_RESET (0x1<<2) +#define MG_REG_CTRL_INTR_POLA_ACTIVE_HIGH 0x0 +#define MG_REG_CTRL_INTR_POLA_ACTIVE_LOW (0x1<<4) +#define MG_REG_CTRL_DPD_POLA_ACTIVE_LOW 0x0 +#define MG_REG_CTRL_DPD_POLA_ACTIVE_HIGH (0x1<<5) +#define MG_REG_CTRL_DPD_DISABLE 0x0 +#define MG_REG_CTRL_DPD_ENABLE (0x1<<6) + +/* Status register bit */ +/* error bit in status register */ +#define MG_REG_STATUS_BIT_ERROR 0x01 +/* corrected error in status register */ +#define MG_REG_STATUS_BIT_CORRECTED_ERROR 0x04 +/* data request bit in status register */ +#define MG_REG_STATUS_BIT_DATA_REQ 0x08 +/* DSC - Drive Seek Complete */ +#define MG_REG_STATUS_BIT_SEEK_DONE 0x10 +/* DWF - Drive Write Fault */ +#define MG_REG_STATUS_BIT_WRITE_FAULT 0x20 +#define MG_REG_STATUS_BIT_READY 0x40 +#define MG_REG_STATUS_BIT_BUSY 0x80 + +/* handy status */ +#define MG_STAT_READY (MG_REG_STATUS_BIT_READY | MG_REG_STATUS_BIT_SEEK_DONE) +#define MG_READY_OK(s) (((s) & (MG_STAT_READY | \ + (MG_REG_STATUS_BIT_BUSY | \ + MG_REG_STATUS_BIT_WRITE_FAULT | \ + MG_REG_STATUS_BIT_ERROR))) == MG_STAT_READY) + +/* Error register */ +#define MG_REG_ERR_AMNF 0x01 +#define MG_REG_ERR_ABRT 0x04 +#define MG_REG_ERR_IDNF 0x10 +#define MG_REG_ERR_UNC 0x40 +#define MG_REG_ERR_BBK 0x80 + +/* error code for others */ +#define MG_ERR_NONE 0 +#define MG_ERR_TIMEOUT 0x100 +#define MG_ERR_INIT_STAT 0x101 +#define MG_ERR_TRANSLATION 0x102 +#define MG_ERR_CTRL_RST 0x103 +#define MG_ERR_INV_STAT 0x104 +#define MG_ERR_RSTOUT 0x105 + +#define MG_MAX_ERRORS 6 /* Max read/write errors */ + +/* command */ +#define MG_CMD_RD 0x20 +#define MG_CMD_WR 0x30 +#define MG_CMD_SLEEP 0x99 +#define MG_CMD_WAKEUP 0xC3 +#define MG_CMD_ID 0xEC +#define MG_CMD_WR_CONF 0x3C +#define MG_CMD_RD_CONF 0x40 + +/* operation mode */ +#define MG_OP_CASCADE (1 << 0) +#define MG_OP_CASCADE_SYNC_RD (1 << 1) +#define MG_OP_CASCADE_SYNC_WR (1 << 2) +#define MG_OP_INTERLEAVE (1 << 3) + +/* synchronous */ +#define MG_BURST_LAT_4 (3 << 4) +#define MG_BURST_LAT_5 (4 << 4) +#define MG_BURST_LAT_6 (5 << 4) +#define MG_BURST_LAT_7 (6 << 4) +#define MG_BURST_LAT_8 (7 << 4) +#define MG_BURST_LEN_4 (1 << 1) +#define MG_BURST_LEN_8 (2 << 1) +#define MG_BURST_LEN_16 (3 << 1) +#define MG_BURST_LEN_32 (4 << 1) +#define MG_BURST_LEN_CONT (0 << 1) + +/* timeout value (unit: ms) */ +#define MG_TMAX_CONF_TO_CMD 1 +#define MG_TMAX_WAIT_RD_DRQ 10 +#define MG_TMAX_WAIT_WR_DRQ 500 +#define MG_TMAX_RST_TO_BUSY 10 +#define MG_TMAX_HDRST_TO_RDY 500 +#define MG_TMAX_SWRST_TO_RDY 500 +#define MG_TMAX_RSTOUT 3000 + +/* device attribution */ +/* use mflash as boot device */ +#define MG_BOOT_DEV (1 << 0) +/* use mflash as storage device */ +#define MG_STORAGE_DEV (1 << 1) +/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */ +#define MG_STORAGE_DEV_SKIP_RST (1 << 2) + +#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST) + +/* names of GPIO resource */ +#define MG_RST_PIN "mg_rst" +/* except MG_BOOT_DEV, reset-out pin should be assigned */ +#define MG_RSTOUT_PIN "mg_rstout" + +/* private driver data */ +struct mg_drv_data { + /* disk resource */ + u32 use_polling; + + /* device attribution */ + u32 dev_attr; + + /* internally used */ + struct mg_host *host; +}; + +/* main structure for mflash driver */ +struct mg_host { + struct device *dev; + + struct request_queue *breq; + spinlock_t lock; + struct gendisk *gd; + + struct timer_list timer; + void (*mg_do_intr) (struct mg_host *); + + u16 id[ATA_ID_WORDS]; + + u16 cyls; + u16 heads; + u16 sectors; + u32 n_sectors; + u32 nres_sectors; + + void __iomem *dev_base; + unsigned int irq; + unsigned int rst; + unsigned int rstout; + + u32 major; + u32 error; +}; + +/* + * Debugging macro and defines + */ +#undef DO_MG_DEBUG +#ifdef DO_MG_DEBUG +# define MG_DBG(fmt, args...) \ + printk(KERN_DEBUG "%s:%d "fmt, __func__, __LINE__, ##args) +#else /* CONFIG_MG_DEBUG */ +# define MG_DBG(fmt, args...) do { } while (0) +#endif /* CONFIG_MG_DEBUG */ + +#endif |