diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-m68k/kbio.h | 1 | ||||
| -rw-r--r-- | include/asm-m68k/vuid_event.h | 4 | ||||
| -rw-r--r-- | include/asm-sparc/audioio.h | 234 | ||||
| -rw-r--r-- | include/asm-sparc/kbio.h | 56 | ||||
| -rw-r--r-- | include/asm-sparc/termios.h | 9 | ||||
| -rw-r--r-- | include/asm-sparc/vuid_event.h | 41 | ||||
| -rw-r--r-- | include/asm-sparc64/audioio.h | 234 | ||||
| -rw-r--r-- | include/asm-sparc64/ebus.h | 1 | ||||
| -rw-r--r-- | include/asm-sparc64/kbio.h | 56 | ||||
| -rw-r--r-- | include/asm-sparc64/mmu_context.h | 46 | ||||
| -rw-r--r-- | include/asm-sparc64/termios.h | 9 | ||||
| -rw-r--r-- | include/asm-sparc64/tlb.h | 14 | ||||
| -rw-r--r-- | include/asm-sparc64/vuid_event.h | 40 |
13 files changed, 30 insertions, 715 deletions
diff --git a/include/asm-m68k/kbio.h b/include/asm-m68k/kbio.h deleted file mode 100644 index e1fbf8fba3e..00000000000 --- a/include/asm-m68k/kbio.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-sparc/kbio.h> diff --git a/include/asm-m68k/vuid_event.h b/include/asm-m68k/vuid_event.h deleted file mode 100644 index 52ecb521a39..00000000000 --- a/include/asm-m68k/vuid_event.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef _M68K_VUID_EVENT_H -#define _M68K_VUID_EVENT_H -#include <asm-sparc/vuid_event.h> -#endif diff --git a/include/asm-sparc/audioio.h b/include/asm-sparc/audioio.h deleted file mode 100644 index cf16173f521..00000000000 --- a/include/asm-sparc/audioio.h +++ /dev/null @@ -1,234 +0,0 @@ -/* - * include/asm-sparc/audioio.h - * - * Sparc Audio Midlayer - * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu) - */ - -#ifndef _AUDIOIO_H_ -#define _AUDIOIO_H_ - -/* - * SunOS/Solaris /dev/audio interface - */ - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) -#include <linux/types.h> -#include <linux/time.h> -#include <linux/ioctl.h> -#endif - -/* - * This structure contains state information for audio device IO streams. - */ -typedef struct audio_prinfo { - /* - * The following values describe the audio data encoding. - */ - unsigned int sample_rate; /* samples per second */ - unsigned int channels; /* number of interleaved channels */ - unsigned int precision; /* bit-width of each sample */ - unsigned int encoding; /* data encoding method */ - - /* - * The following values control audio device configuration - */ - unsigned int gain; /* gain level: 0 - 255 */ - unsigned int port; /* selected I/O port (see below) */ - unsigned int avail_ports; /* available I/O ports (see below) */ - unsigned int _xxx[2]; /* Reserved for future use */ - - unsigned int buffer_size; /* I/O buffer size */ - - /* - * The following values describe driver state - */ - unsigned int samples; /* number of samples converted */ - unsigned int eof; /* End Of File counter (play only) */ - - unsigned char pause; /* non-zero for pause, zero to resume */ - unsigned char error; /* non-zero if overflow/underflow */ - unsigned char waiting; /* non-zero if a process wants access */ - unsigned char balance; /* stereo channel balance */ - - unsigned short minordev; - - /* - * The following values are read-only state flags - */ - unsigned char open; /* non-zero if open access permitted */ - unsigned char active; /* non-zero if I/O is active */ -} audio_prinfo_t; - - -/* - * This structure describes the current state of the audio device. - */ -typedef struct audio_info { - /* - * Per-stream information - */ - audio_prinfo_t play; /* output status information */ - audio_prinfo_t record; /* input status information */ - - /* - * Per-unit/channel information - */ - unsigned int monitor_gain; /* input to output mix: 0 - 255 */ - unsigned char output_muted; /* non-zero if output is muted */ - unsigned char _xxx[3]; /* Reserved for future use */ - unsigned int _yyy[3]; /* Reserved for future use */ -} audio_info_t; - - -/* - * Audio encoding types - */ -#define AUDIO_ENCODING_NONE (0) /* no encoding assigned */ -#define AUDIO_ENCODING_ULAW (1) /* u-law encoding */ -#define AUDIO_ENCODING_ALAW (2) /* A-law encoding */ -#define AUDIO_ENCODING_LINEAR (3) /* Linear PCM encoding */ -#define AUDIO_ENCODING_FLOAT (4) /* IEEE float (-1. <-> +1.) */ -#define AUDIO_ENCODING_DVI (104) /* DVI ADPCM */ -#define AUDIO_ENCODING_LINEAR8 (105) /* 8 bit UNSIGNED */ -#define AUDIO_ENCODING_LINEARLE (106) /* Linear PCM LE encoding */ - -/* - * These ranges apply to record, play, and monitor gain values - */ -#define AUDIO_MIN_GAIN (0) /* minimum gain value */ -#define AUDIO_MAX_GAIN (255) /* maximum gain value */ - -/* - * These values apply to the balance field to adjust channel gain values - */ -#define AUDIO_LEFT_BALANCE (0) /* left channel only */ -#define AUDIO_MID_BALANCE (32) /* equal left/right channel */ -#define AUDIO_RIGHT_BALANCE (64) /* right channel only */ -#define AUDIO_BALANCE_SHIFT (3) - -/* - * Generic minimum/maximum limits for number of channels, both modes - */ -#define AUDIO_MIN_PLAY_CHANNELS (1) -#define AUDIO_MAX_PLAY_CHANNELS (4) -#define AUDIO_MIN_REC_CHANNELS (1) -#define AUDIO_MAX_REC_CHANNELS (4) - -/* - * Generic minimum/maximum limits for sample precision - */ -#define AUDIO_MIN_PLAY_PRECISION (8) -#define AUDIO_MAX_PLAY_PRECISION (32) -#define AUDIO_MIN_REC_PRECISION (8) -#define AUDIO_MAX_REC_PRECISION (32) - -/* - * Define some convenient names for typical audio ports - */ -/* - * output ports (several may be enabled simultaneously) - */ -#define AUDIO_SPEAKER 0x01 /* output to built-in speaker */ -#define AUDIO_HEADPHONE 0x02 /* output to headphone jack */ -#define AUDIO_LINE_OUT 0x04 /* output to line out */ - -/* - * input ports (usually only one at a time) - */ -#define AUDIO_MICROPHONE 0x01 /* input from microphone */ -#define AUDIO_LINE_IN 0x02 /* input from line in */ -#define AUDIO_CD 0x04 /* input from on-board CD inputs */ -#define AUDIO_INTERNAL_CD_IN AUDIO_CD /* input from internal CDROM */ -#define AUDIO_ANALOG_LOOPBACK 0x40 /* input from output */ - - -/* - * This macro initializes an audio_info structure to 'harmless' values. - * Note that (~0) might not be a harmless value for a flag that was - * a signed int. - */ -#define AUDIO_INITINFO(i) { \ - unsigned int *__x__; \ - for (__x__ = (unsigned int *)(i); \ - (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t)); \ - *__x__++ = ~0); \ -} - -/* - * These allow testing for what the user wants to set - */ -#define AUD_INITVALUE (~0) -#define Modify(X) ((unsigned int)(X) != AUD_INITVALUE) -#define Modifys(X) ((X) != (unsigned short)AUD_INITVALUE) -#define Modifyc(X) ((X) != (unsigned char)AUD_INITVALUE) - -/* - * Parameter for the AUDIO_GETDEV ioctl to determine current - * audio devices. - */ -#define MAX_AUDIO_DEV_LEN (16) -typedef struct audio_device { - char name[MAX_AUDIO_DEV_LEN]; - char version[MAX_AUDIO_DEV_LEN]; - char config[MAX_AUDIO_DEV_LEN]; -} audio_device_t; - - -/* - * Ioctl calls for the audio device. - */ - -/* - * AUDIO_GETINFO retrieves the current state of the audio device. - * - * AUDIO_SETINFO copies all fields of the audio_info structure whose - * values are not set to the initialized value (-1) to the device state. - * It performs an implicit AUDIO_GETINFO to return the new state of the - * device. Note that the record.samples and play.samples fields are set - * to the last value before the AUDIO_SETINFO took effect. This allows - * an application to reset the counters while atomically retrieving the - * last value. - * - * AUDIO_DRAIN suspends the calling process until the write buffers are - * empty. - * - * AUDIO_GETDEV returns a structure of type audio_device_t which contains - * three strings. The string "name" is a short identifying string (for - * example, the SBus Fcode name string), the string "version" identifies - * the current version of the device, and the "config" string identifies - * the specific configuration of the audio stream. All fields are - * device-dependent -- see the device specific manual pages for details. - * - * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined - * herein (making it not too portable) - * - * AUDIO_FLUSH stops all playback and recording, clears all queued buffers, - * resets error counters, and restarts recording and playback as appropriate - * for the current sampling mode. - */ -#define AUDIO_GETINFO _IOR('A', 1, audio_info_t) -#define AUDIO_SETINFO _IOWR('A', 2, audio_info_t) -#define AUDIO_DRAIN _IO('A', 3) -#define AUDIO_GETDEV _IOR('A', 4, audio_device_t) -#define AUDIO_GETDEV_SUNOS _IOR('A', 4, int) -#define AUDIO_FLUSH _IO('A', 5) - -/* Define possible audio hardware configurations for - * old SunOS-style AUDIO_GETDEV ioctl */ -#define AUDIO_DEV_UNKNOWN (0) /* not defined */ -#define AUDIO_DEV_AMD (1) /* audioamd device */ -#define AUDIO_DEV_SPEAKERBOX (2) /* dbri device with speakerbox */ -#define AUDIO_DEV_CODEC (3) /* dbri device (internal speaker) */ -#define AUDIO_DEV_CS4231 (5) /* cs4231 device */ - -/* - * The following ioctl sets the audio device into an internal loopback mode, - * if the hardware supports this. The argument is TRUE to set loopback, - * FALSE to reset to normal operation. If the hardware does not support - * internal loopback, the ioctl should fail with EINVAL. - * Causes ADC data to be digitally mixed in and sent to the DAC. - */ -#define AUDIO_DIAG_LOOPBACK _IOW('A', 101, int) - -#endif /* _AUDIOIO_H_ */ diff --git a/include/asm-sparc/kbio.h b/include/asm-sparc/kbio.h deleted file mode 100644 index 3cf496bdf39..00000000000 --- a/include/asm-sparc/kbio.h +++ /dev/null @@ -1,56 +0,0 @@ -#ifndef __LINUX_KBIO_H -#define __LINUX_KBIO_H - -/* Return keyboard type */ -#define KIOCTYPE _IOR('k', 9, int) -/* Return Keyboard layout */ -#define KIOCLAYOUT _IOR('k', 20, int) - -enum { - TR_NONE, - TR_ASCII, /* keyboard is in regular state */ - TR_EVENT, /* keystrokes sent as firm events */ - TR_UNTRANS_EVENT /* EVENT+up and down+no translation */ -}; - -/* Return the current keyboard translation */ -#define KIOCGTRANS _IOR('k', 5, int) -/* Set the keyboard translation */ -#define KIOCTRANS _IOW('k', 0, int) - -/* Send a keyboard command */ -#define KIOCCMD _IOW('k', 8, int) - -/* Return if keystrokes are being sent to /dev/kbd */ - -/* Set routing of keystrokes to /dev/kbd */ -#define KIOCSDIRECT _IOW('k', 10, int) - -/* Set keyboard leds */ -#define KIOCSLED _IOW('k', 14, unsigned char) - -/* Get keyboard leds */ -#define KIOCGLED _IOR('k', 15, unsigned char) - -/* Used by KIOC[GS]RATE */ -struct kbd_rate { - unsigned char delay; /* Delay in Hz before first repeat. */ - unsigned char rate; /* In characters per second (0..50). */ -}; - -/* Set keyboard rate */ -#define KIOCSRATE _IOW('k', 40, struct kbd_rate) - -/* Get keyboard rate */ -#define KIOCGRATE _IOW('k', 41, struct kbd_rate) - -/* Top bit records if the key is up or down */ -#define KBD_UP 0x80 - -/* Usable information */ -#define KBD_KEYMASK 0x7f - -/* All keys up */ -#define KBD_IDLE 0x75 - -#endif /* __LINUX_KBIO_H */ diff --git a/include/asm-sparc/termios.h b/include/asm-sparc/termios.h index 0a8ad4cac12..d05f83c8098 100644 --- a/include/asm-sparc/termios.h +++ b/include/asm-sparc/termios.h @@ -38,15 +38,6 @@ struct sunos_ttysize { int st_columns; /* Columns on the terminal */ }; -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - struct winsize { unsigned short ws_row; unsigned short ws_col; diff --git a/include/asm-sparc/vuid_event.h b/include/asm-sparc/vuid_event.h deleted file mode 100644 index 7781e9f2fdd..00000000000 --- a/include/asm-sparc/vuid_event.h +++ /dev/null @@ -1,41 +0,0 @@ -/* SunOS Virtual User Input Device (VUID) compatibility */ - - -typedef struct firm_event { - unsigned short id; /* tag for this event */ - unsigned char pair_type; /* unused by X11 */ - unsigned char pair; /* unused by X11 */ - int value; /* VKEY_UP, VKEY_DOWN or delta */ - struct timeval time; -} Firm_event; - -enum { - FE_PAIR_NONE, - FE_PAIR_SET, - FE_PAIR_DELTA, - FE_PAIR_ABSOLUTE -}; - -/* VUID stream formats */ -#define VUID_NATIVE 0 /* Native byte stream format */ -#define VUID_FIRM_EVENT 1 /* send firm_event structures */ - -/* ioctls */ - /* Set input device byte stream format (any of VUID_{NATIVE,FIRM_EVENT}) */ -#define VUIDSFORMAT _IOW('v', 1, int) - /* Retrieve input device byte stream format */ -#define VUIDGFORMAT _IOR('v', 2, int) - -/* Possible tag values */ -/* mouse buttons: */ -#define MS_LEFT 0x7f20 -#define MS_MIDDLE 0x7f21 -#define MS_RIGHT 0x7f22 -/* motion: */ -#define LOC_X_DELTA 0x7f80 -#define LOC_Y_DELTA 0x7f81 -#define LOC_X_ABSOLUTE 0x7f82 /* X compat, unsupported */ -#define LOC_Y_ABSOLUTE 0x7f83 /* X compat, unsupported */ - -#define VKEY_UP 0 -#define VKEY_DOWN 1 diff --git a/include/asm-sparc64/audioio.h b/include/asm-sparc64/audioio.h deleted file mode 100644 index cf16173f521..00000000000 --- a/include/asm-sparc64/audioio.h +++ /dev/null @@ -1,234 +0,0 @@ -/* - * include/asm-sparc/audioio.h - * - * Sparc Audio Midlayer - * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu) - */ - -#ifndef _AUDIOIO_H_ -#define _AUDIOIO_H_ - -/* - * SunOS/Solaris /dev/audio interface - */ - -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) -#include <linux/types.h> -#include <linux/time.h> -#include <linux/ioctl.h> -#endif - -/* - * This structure contains state information for audio device IO streams. - */ -typedef struct audio_prinfo { - /* - * The following values describe the audio data encoding. - */ - unsigned int sample_rate; /* samples per second */ - unsigned int channels; /* number of interleaved channels */ - unsigned int precision; /* bit-width of each sample */ - unsigned int encoding; /* data encoding method */ - - /* - * The following values control audio device configuration - */ - unsigned int gain; /* gain level: 0 - 255 */ - unsigned int port; /* selected I/O port (see below) */ - unsigned int avail_ports; /* available I/O ports (see below) */ - unsigned int _xxx[2]; /* Reserved for future use */ - - unsigned int buffer_size; /* I/O buffer size */ - - /* - * The following values describe driver state - */ - unsigned int samples; /* number of samples converted */ - unsigned int eof; /* End Of File counter (play only) */ - - unsigned char pause; /* non-zero for pause, zero to resume */ - unsigned char error; /* non-zero if overflow/underflow */ - unsigned char waiting; /* non-zero if a process wants access */ - unsigned char balance; /* stereo channel balance */ - - unsigned short minordev; - - /* - * The following values are read-only state flags - */ - unsigned char open; /* non-zero if open access permitted */ - unsigned char active; /* non-zero if I/O is active */ -} audio_prinfo_t; - - -/* - * This structure describes the current state of the audio device. - */ -typedef struct audio_info { - /* - * Per-stream information - */ - audio_prinfo_t play; /* output status information */ - audio_prinfo_t record; /* input status information */ - - /* - * Per-unit/channel information - */ - unsigned int monitor_gain; /* input to output mix: 0 - 255 */ - unsigned char output_muted; /* non-zero if output is muted */ - unsigned char _xxx[3]; /* Reserved for future use */ - unsigned int _yyy[3]; /* Reserved for future use */ -} audio_info_t; - - -/* - * Audio encoding types - */ -#define AUDIO_ENCODING_NONE (0) /* no encoding assigned */ -#define AUDIO_ENCODING_ULAW (1) /* u-law encoding */ -#define AUDIO_ENCODING_ALAW (2) /* A-law encoding */ -#define AUDIO_ENCODING_LINEAR (3) /* Linear PCM encoding */ -#define AUDIO_ENCODING_FLOAT (4) /* IEEE float (-1. <-> +1.) */ -#define AUDIO_ENCODING_DVI (104) /* DVI ADPCM */ -#define AUDIO_ENCODING_LINEAR8 (105) /* 8 bit UNSIGNED */ -#define AUDIO_ENCODING_LINEARLE (106) /* Linear PCM LE encoding */ - -/* - * These ranges apply to record, play, and monitor gain values - */ -#define AUDIO_MIN_GAIN (0) /* minimum gain value */ -#define AUDIO_MAX_GAIN (255) /* maximum gain value */ - -/* - * These values apply to the balance field to adjust channel gain values - */ -#define AUDIO_LEFT_BALANCE (0) /* left channel only */ -#define AUDIO_MID_BALANCE (32) /* equal left/right channel */ -#define AUDIO_RIGHT_BALANCE (64) /* right channel only */ -#define AUDIO_BALANCE_SHIFT (3) - -/* - * Generic minimum/maximum limits for number of channels, both modes - */ -#define AUDIO_MIN_PLAY_CHANNELS (1) -#define AUDIO_MAX_PLAY_CHANNELS (4) -#define AUDIO_MIN_REC_CHANNELS (1) -#define AUDIO_MAX_REC_CHANNELS (4) - -/* - * Generic minimum/maximum limits for sample precision - */ -#define AUDIO_MIN_PLAY_PRECISION (8) -#define AUDIO_MAX_PLAY_PRECISION (32) -#define AUDIO_MIN_REC_PRECISION (8) -#define AUDIO_MAX_REC_PRECISION (32) - -/* - * Define some convenient names for typical audio ports - */ -/* - * output ports (several may be enabled simultaneously) - */ -#define AUDIO_SPEAKER 0x01 /* output to built-in speaker */ -#define AUDIO_HEADPHONE 0x02 /* output to headphone jack */ -#define AUDIO_LINE_OUT 0x04 /* output to line out */ - -/* - * input ports (usually only one at a time) - */ -#define AUDIO_MICROPHONE 0x01 /* input from microphone */ -#define AUDIO_LINE_IN 0x02 /* input from line in */ -#define AUDIO_CD 0x04 /* input from on-board CD inputs */ -#define AUDIO_INTERNAL_CD_IN AUDIO_CD /* input from internal CDROM */ -#define AUDIO_ANALOG_LOOPBACK 0x40 /* input from output */ - - -/* - * This macro initializes an audio_info structure to 'harmless' values. - * Note that (~0) might not be a harmless value for a flag that was - * a signed int. - */ -#define AUDIO_INITINFO(i) { \ - unsigned int *__x__; \ - for (__x__ = (unsigned int *)(i); \ - (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t)); \ - *__x__++ = ~0); \ -} - -/* - * These allow testing for what the user wants to set - */ -#define AUD_INITVALUE (~0) -#define Modify(X) ((unsigned int)(X) != AUD_INITVALUE) -#define Modifys(X) ((X) != (unsigned short)AUD_INITVALUE) -#define Modifyc(X) ((X) != (unsigned char)AUD_INITVALUE) - -/* - * Parameter for the AUDIO_GETDEV ioctl to determine current - * audio devices. - */ -#define MAX_AUDIO_DEV_LEN (16) -typedef struct audio_device { - char name[MAX_AUDIO_DEV_LEN]; - char version[MAX_AUDIO_DEV_LEN]; - char config[MAX_AUDIO_DEV_LEN]; -} audio_device_t; - - -/* - * Ioctl calls for the audio device. - */ - -/* - * AUDIO_GETINFO retrieves the current state of the audio device. - * - * AUDIO_SETINFO copies all fields of the audio_info structure whose - * values are not set to the initialized value (-1) to the device state. - * It performs an implicit AUDIO_GETINFO to return the new state of the - * device. Note that the record.samples and play.samples fields are set - * to the last value before the AUDIO_SETINFO took effect. This allows - * an application to reset the counters while atomically retrieving the - * last value. - * - * AUDIO_DRAIN suspends the calling process until the write buffers are - * empty. - * - * AUDIO_GETDEV returns a structure of type audio_device_t which contains - * three strings. The string "name" is a short identifying string (for - * example, the SBus Fcode name string), the string "version" identifies - * the current version of the device, and the "config" string identifies - * the specific configuration of the audio stream. All fields are - * device-dependent -- see the device specific manual pages for details. - * - * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined - * herein (making it not too portable) - * - * AUDIO_FLUSH stops all playback and recording, clears all queued buffers, - * resets error counters, and restarts recording and playback as appropriate - * for the current sampling mode. - */ -#define AUDIO_GETINFO _IOR('A', 1, audio_info_t) -#define AUDIO_SETINFO _IOWR('A', 2, audio_info_t) -#define AUDIO_DRAIN _IO('A', 3) -#define AUDIO_GETDEV _IOR('A', 4, audio_device_t) -#define AUDIO_GETDEV_SUNOS _IOR('A', 4, int) -#define AUDIO_FLUSH _IO('A', 5) - -/* Define possible audio hardware configurations for - * old SunOS-style AUDIO_GETDEV ioctl */ -#define AUDIO_DEV_UNKNOWN (0) /* not defined */ -#define AUDIO_DEV_AMD (1) /* audioamd device */ -#define AUDIO_DEV_SPEAKERBOX (2) /* dbri device with speakerbox */ -#define AUDIO_DEV_CODEC (3) /* dbri device (internal speaker) */ -#define AUDIO_DEV_CS4231 (5) /* cs4231 device */ - -/* - * The following ioctl sets the audio device into an internal loopback mode, - * if the hardware supports this. The argument is TRUE to set loopback, - * FALSE to reset to normal operation. If the hardware does not support - * internal loopback, the ioctl should fail with EINVAL. - * Causes ADC data to be digitally mixed in and sent to the DAC. - */ -#define AUDIO_DIAG_LOOPBACK _IOW('A', 101, int) - -#endif /* _AUDIOIO_H_ */ diff --git a/include/asm-sparc64/ebus.h b/include/asm-sparc64/ebus.h index 543e4e500a7..7a408a030f5 100644 --- a/include/asm-sparc64/ebus.h +++ b/include/asm-sparc64/ebus.h @@ -79,6 +79,7 @@ extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr, size_t len); extern void ebus_dma_prepare(struct ebus_dma_info *p, int write); extern unsigned int ebus_dma_residue(struct ebus_dma_info *p); +extern unsigned int ebus_dma_addr(struct ebus_dma_info *p); extern void ebus_dma_enable(struct ebus_dma_info *p, int on); extern struct linux_ebus *ebus_chain; diff --git a/include/asm-sparc64/kbio.h b/include/asm-sparc64/kbio.h deleted file mode 100644 index 3cf496bdf39..00000000000 --- a/include/asm-sparc64/kbio.h +++ /dev/null @@ -1,56 +0,0 @@ -#ifndef __LINUX_KBIO_H -#define __LINUX_KBIO_H - -/* Return keyboard type */ -#define KIOCTYPE _IOR('k', 9, int) -/* Return Keyboard layout */ -#define KIOCLAYOUT _IOR('k', 20, int) - -enum { - TR_NONE, - TR_ASCII, /* keyboard is in regular state */ - TR_EVENT, /* keystrokes sent as firm events */ - TR_UNTRANS_EVENT /* EVENT+up and down+no translation */ -}; - -/* Return the current keyboard translation */ -#define KIOCGTRANS _IOR('k', 5, int) -/* Set the keyboard translation */ -#define KIOCTRANS _IOW('k', 0, int) - -/* Send a keyboard command */ -#define KIOCCMD _IOW('k', 8, int) - -/* Return if keystrokes are being sent to /dev/kbd */ - -/* Set routing of keystrokes to /dev/kbd */ -#define KIOCSDIRECT _IOW('k', 10, int) - -/* Set keyboard leds */ -#define KIOCSLED _IOW('k', 14, unsigned char) - -/* Get keyboard leds */ -#define KIOCGLED _IOR('k', 15, unsigned char) - -/* Used by KIOC[GS]RATE */ -struct kbd_rate { - unsigned char delay; /* Delay in Hz before first repeat. */ - unsigned char rate; /* In characters per second (0..50). */ -}; - -/* Set keyboard rate */ -#define KIOCSRATE _IOW('k', 40, struct kbd_rate) - -/* Get keyboard rate */ -#define KIOCGRATE _IOW('k', 41, struct kbd_rate) - -/* Top bit records if the key is up or down */ -#define KBD_UP 0x80 - -/* Usable information */ -#define KBD_KEYMASK 0x7f - -/* All keys up */ -#define KBD_IDLE 0x75 - -#endif /* __LINUX_KBIO_H */ diff --git a/include/asm-sparc64/mmu_context.h b/include/asm-sparc64/mmu_context.h index 87c43c67866..08ba72d7722 100644 --- a/include/asm-sparc64/mmu_context.h +++ b/include/asm-sparc64/mmu_context.h @@ -87,37 +87,35 @@ extern void __flush_tlb_mm(unsigned long, unsigned long); static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk) { unsigned long ctx_valid; + int cpu; + /* Note: page_table_lock is used here to serialize switch_mm + * and activate_mm, and their calls to get_new_mmu_context. + * This use of page_table_lock is unrelated to its other uses. + */ spin_lock(&mm->page_table_lock); - if (CTX_VALID(mm->context)) - ctx_valid = 1; - else - ctx_valid = 0; + ctx_valid = CTX_VALID(mm->context); + if (!ctx_valid) + get_new_mmu_context(mm); + spin_unlock(&mm->page_table_lock); if (!ctx_valid || (old_mm != mm)) { - if (!ctx_valid) - get_new_mmu_context(mm); - load_secondary_context(mm); reload_tlbmiss_state(tsk, mm); } - { - int cpu = smp_processor_id(); - - /* Even if (mm == old_mm) we _must_ check - * the cpu_vm_mask. If we do not we could - * corrupt the TLB state because of how - * smp_flush_tlb_{page,range,mm} on sparc64 - * and lazy tlb switches work. -DaveM - */ - if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) { - cpu_set(cpu, mm->cpu_vm_mask); - __flush_tlb_mm(CTX_HWBITS(mm->context), - SECONDARY_CONTEXT); - } + /* Even if (mm == old_mm) we _must_ check + * the cpu_vm_mask. If we do not we could + * corrupt the TLB state because of how + * smp_flush_tlb_{page,range,mm} on sparc64 + * and lazy tlb switches work. -DaveM + */ + cpu = smp_processor_id(); + if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) { + cpu_set(cpu, mm->cpu_vm_mask); + __flush_tlb_mm(CTX_HWBITS(mm->context), + SECONDARY_CONTEXT); } - spin_unlock(&mm->page_table_lock); } #define deactivate_mm(tsk,mm) do { } while (0) @@ -127,6 +125,10 @@ static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm { int cpu; + /* Note: page_table_lock is used here to serialize switch_mm + * and activate_mm, and their calls to get_new_mmu_context. + * This use of page_table_lock is unrelated to its other uses. + */ spin_lock(&mm->page_table_lock); if (!CTX_VALID(mm->context)) get_new_mmu_context(mm); diff --git a/include/asm-sparc64/termios.h b/include/asm-sparc64/termios.h index 9777a9cca88..ee26a071c67 100644 --- a/include/asm-sparc64/termios.h +++ b/include/asm-sparc64/termios.h @@ -38,15 +38,6 @@ struct sunos_ttysize { int st_columns; /* Columns on the terminal */ }; -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - struct winsize { unsigned short ws_row; unsigned short ws_col; diff --git a/include/asm-sparc64/tlb.h b/include/asm-sparc64/tlb.h index 66138d959df..61c01882b56 100644 --- a/include/asm-sparc64/tlb.h +++ b/include/asm-sparc64/tlb.h @@ -58,11 +58,9 @@ static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned i static inline void tlb_flush_mmu(struct mmu_gather *mp) { if (mp->need_flush) { + free_pages_and_swap_cache(mp->pages, mp->pages_nr); + mp->pages_nr = 0; mp->need_flush = 0; - if (!tlb_fast_mode(mp)) { - free_pages_and_swap_cache(mp->pages, mp->pages_nr); - mp->pages_nr = 0; - } } } @@ -78,11 +76,9 @@ static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, un { tlb_flush_mmu(mp); - if (mp->fullmm) { - if (CTX_VALID(mp->mm->context)) - do_flush_tlb_mm(mp->mm); + if (mp->fullmm) mp->fullmm = 0; - } else + else flush_tlb_pending(); /* keep the page table cache within bounds */ @@ -93,11 +89,11 @@ static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, un static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page) { - mp->need_flush = 1; if (tlb_fast_mode(mp)) { free_page_and_swap_cache(page); return; } + mp->need_flush = 1; mp->pages[mp->pages_nr++] = page; if (mp->pages_nr >= FREE_PTE_NR) tlb_flush_mmu(mp); diff --git a/include/asm-sparc64/vuid_event.h b/include/asm-sparc64/vuid_event.h deleted file mode 100644 index 9ef4d17ad08..00000000000 --- a/include/asm-sparc64/vuid_event.h +++ /dev/null @@ -1,40 +0,0 @@ -/* SunOS Virtual User Input Device (VUID) compatibility */ - -typedef struct firm_event { - unsigned short id; /* tag for this event */ - unsigned char pair_type; /* unused by X11 */ - unsigned char pair; /* unused by X11 */ - int value; /* VKEY_UP, VKEY_DOWN or delta */ - struct timeval time; -} Firm_event; - -enum { - FE_PAIR_NONE, - FE_PAIR_SET, - FE_PAIR_DELTA, - FE_PAIR_ABSOLUTE -}; - -/* VUID stream formats */ -#define VUID_NATIVE 0 /* Native byte stream format */ -#define VUID_FIRM_EVENT 1 /* send firm_event structures */ - -/* ioctls */ - /* Set input device byte stream format (any of VUID_{NATIVE,FIRM_EVENT}) */ -#define VUIDSFORMAT _IOW('v', 1, int) - /* Retrieve input device byte stream format */ -#define VUIDGFORMAT _IOR('v', 2, int) - -/* Possible tag values */ -/* mouse buttons: */ -#define MS_LEFT 0x7f20 -#define MS_MIDDLE 0x7f21 -#define MS_RIGHT 0x7f22 -/* motion: */ -#define LOC_X_DELTA 0x7f80 -#define LOC_Y_DELTA 0x7f81 -#define LOC_X_ABSOLUTE 0x7f82 /* X compat, unsupported */ -#define LOC_Y_ABSOLUTE 0x7f83 /* X compat, unsupported */ - -#define VKEY_UP 0 -#define VKEY_DOWN 1 |