diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/i2c-algo-pcf.h | 8 | ||||
| -rw-r--r-- | include/linux/i2c-id.h | 3 | ||||
| -rw-r--r-- | include/linux/i2c.h | 46 | ||||
| -rw-r--r-- | include/linux/i2c/at24.h | 28 |
4 files changed, 70 insertions, 15 deletions
diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 77afbb60fd1..0177d280f73 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -33,9 +33,11 @@ struct i2c_algo_pcf_data { int (*getclock) (void *data); void (*waitforpin) (void); - /* local settings */ - int udelay; - int timeout; + /* Multi-master lost arbitration back-off delay (msecs) + * This should be set by the bus adapter or knowledgable client + * if bus is multi-mastered, else zero + */ + unsigned long lab_mdelay; }; int i2c_pcf_add_bus(struct i2c_adapter *); diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 580acc93903..ef13b7c66df 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -91,8 +91,6 @@ #define I2C_DRIVERID_M52790 95 /* Mitsubishi M52790SP/FP AV switch */ #define I2C_DRIVERID_CS5345 96 /* cs5345 audio processor */ -#define I2C_DRIVERID_I2CDEV 900 - #define I2C_DRIVERID_OV7670 1048 /* Omnivision 7670 camera */ /* @@ -111,7 +109,6 @@ #define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */ #define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */ #define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */ -#define I2C_HW_B_S3VIA 0x010018 /* S3Via ProSavage adapter */ #define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */ #define I2C_HW_B_PCILYNX 0x01001a /* TI PCILynx I2C adapter */ #define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 8dc73013219..08be0d21864 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -35,6 +35,8 @@ #include <linux/sched.h> /* for completion */ #include <linux/mutex.h> +extern struct bus_type i2c_bus_type; + /* --- General options ------------------------------------------------ */ struct i2c_msg; @@ -43,6 +45,7 @@ struct i2c_adapter; struct i2c_client; struct i2c_driver; union i2c_smbus_data; +struct i2c_board_info; /* * The master routines are the ones normally used to transmit data to devices @@ -69,9 +72,8 @@ extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, union i2c_smbus_data * data); /* Now follow the 'nice' access routines. These also document the calling - conventions of smbus_access. */ + conventions of i2c_smbus_xfer. */ -extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte(struct i2c_client * client); extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value); extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command); @@ -93,15 +95,33 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, u8 command, u8 length, const u8 *values); -/* - * A driver is capable of handling one or more physical devices present on - * I2C adapters. This information is used to inform the driver of adapter - * events. +/** + * struct i2c_driver - represent an I2C device driver + * @class: What kind of i2c device we instantiate (for detect) + * @detect: Callback for device detection + * @address_data: The I2C addresses to probe, ignore or force (for detect) + * @clients: List of detected clients we created (for i2c-core use only) * * The driver.owner field should be set to the module owner of this driver. * The driver.name field should be set to the name of this driver. + * + * For automatic device detection, both @detect and @address_data must + * be defined. @class should also be set, otherwise only devices forced + * with module parameters will be created. The detect function must + * fill at least the name field of the i2c_board_info structure it is + * handed upon successful detection, and possibly also the flags field. + * + * If @detect is missing, the driver will still work fine for enumerated + * devices. Detected devices simply won't be supported. This is expected + * for the many I2C/SMBus devices which can't be detected reliably, and + * the ones which can always be enumerated in practice. + * + * The i2c_client structure which is handed to the @detect callback is + * not a real i2c_client. It is initialized just enough so that you can + * call i2c_smbus_read_byte_data and friends on it. Don't do anything + * else with it. In particular, calling dev_dbg and friends on it is + * not allowed. */ - struct i2c_driver { int id; unsigned int class; @@ -141,6 +161,11 @@ struct i2c_driver { struct device_driver driver; const struct i2c_device_id *id_table; + + /* Device detection callback for automatic device creation */ + int (*detect)(struct i2c_client *, int kind, struct i2c_board_info *); + const struct i2c_client_address_data *address_data; + struct list_head clients; }; #define to_i2c_driver(d) container_of(d, struct i2c_driver, driver) @@ -156,6 +181,7 @@ struct i2c_driver { * @dev: Driver model device node for the slave. * @irq: indicates the IRQ generated by this device (if any) * @list: list of active/busy clients (DEPRECATED) + * @detected: member of an i2c_driver.clients list * @released: used to synchronize client releases & detaches and references * * An i2c_client identifies a single device (i.e. chip) connected to an @@ -173,6 +199,7 @@ struct i2c_client { struct device dev; /* the device structure */ int irq; /* irq issued by device */ struct list_head list; /* DEPRECATED */ + struct list_head detected; struct completion released; }; #define to_i2c_client(d) container_of(d, struct i2c_client, dev) @@ -350,10 +377,11 @@ static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data) #define I2C_CLASS_HWMON (1<<0) /* lm_sensors, ... */ #define I2C_CLASS_TV_ANALOG (1<<1) /* bttv + friends */ #define I2C_CLASS_TV_DIGITAL (1<<2) /* dvb cards */ -#define I2C_CLASS_DDC (1<<3) /* i2c-matroxfb ? */ +#define I2C_CLASS_DDC (1<<3) /* DDC bus on graphics adapters */ #define I2C_CLASS_CAM_ANALOG (1<<4) /* camera with analog CCD */ #define I2C_CLASS_CAM_DIGITAL (1<<5) /* most webcams */ #define I2C_CLASS_SOUND (1<<6) /* sound devices */ +#define I2C_CLASS_SPD (1<<7) /* SPD EEPROMs and similar */ #define I2C_CLASS_ALL (UINT_MAX) /* all of the above */ /* i2c_client_address_data is the struct for holding default client @@ -537,7 +565,7 @@ union i2c_smbus_data { /* and one more for user-space compatibility */ }; -/* smbus_access read or write markers */ +/* i2c_smbus_xfer read or write markers */ #define I2C_SMBUS_READ 1 #define I2C_SMBUS_WRITE 0 diff --git a/include/linux/i2c/at24.h b/include/linux/i2c/at24.h new file mode 100644 index 00000000000..f6edd522a92 --- /dev/null +++ b/include/linux/i2c/at24.h @@ -0,0 +1,28 @@ +#ifndef _LINUX_AT24_H +#define _LINUX_AT24_H + +#include <linux/types.h> + +/* + * As seen through Linux I2C, differences between the most common types of I2C + * memory include: + * - How much memory is available (usually specified in bit)? + * - What write page size does it support? + * - Special flags (16 bit addresses, read_only, world readable...)? + * + * If you set up a custom eeprom type, please double-check the parameters. + * Especially page_size needs extra care, as you risk data loss if your value + * is bigger than what the chip actually supports! + */ + +struct at24_platform_data { + u32 byte_len; /* size (sum of all addr) */ + u16 page_size; /* for writes */ + u8 flags; +#define AT24_FLAG_ADDR16 0x80 /* address pointer is 16 bit */ +#define AT24_FLAG_READONLY 0x40 /* sysfs-entry will be read-only */ +#define AT24_FLAG_IRUGO 0x20 /* sysfs-entry will be world-readable */ +#define AT24_FLAG_TAKE8ADDR 0x10 /* take always 8 addresses (24c00) */ +}; + +#endif /* _LINUX_AT24_H */ |