diff options
Diffstat (limited to 'include')
271 files changed, 2815 insertions, 7878 deletions
diff --git a/include/asm-alpha/page.h b/include/asm-alpha/page.h index 22ff9762d17..0995f9d1341 100644 --- a/include/asm-alpha/page.h +++ b/include/asm-alpha/page.h @@ -80,9 +80,6 @@ typedef struct page *pgtable_t; #endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - #define __pa(x) ((unsigned long) (x) - PAGE_OFFSET) #define __va(x) ((void *)((unsigned long) (x) + PAGE_OFFSET)) #ifndef CONFIG_DISCONTIGMEM diff --git a/include/asm-alpha/socket.h b/include/asm-alpha/socket.h index 08c97931992..a1057c2d95e 100644 --- a/include/asm-alpha/socket.h +++ b/include/asm-alpha/socket.h @@ -62,4 +62,9 @@ #define SO_MARK 36 +/* O_NONBLOCK clashes with the bits used for socket types. Therefore we + * have to define SOCK_NONBLOCK to a different value here. + */ +#define SOCK_NONBLOCK 0x40000000 + #endif /* _ASM_SOCKET_H */ diff --git a/include/asm-arm/arch-iop13xx/adma.h b/include/asm-arm/arch-iop13xx/adma.h index 90d14ee564f..ef4f5da2029 100644 --- a/include/asm-arm/arch-iop13xx/adma.h +++ b/include/asm-arm/arch-iop13xx/adma.h @@ -198,17 +198,13 @@ iop_chan_memset_slot_count(size_t len, int *slots_per_op) static inline int iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op) { - int num_slots; - /* slots_to_find = 1 for basic descriptor + 1 per 4 sources above 1 - * (1 source => 8 bytes) (1 slot => 32 bytes) - */ - num_slots = 1 + (((src_cnt - 1) << 3) >> 5); - if (((src_cnt - 1) << 3) & 0x1f) - num_slots++; - - *slots_per_op = num_slots; - - return num_slots; + static const char slot_count_table[] = { 1, 2, 2, 2, + 2, 3, 3, 3, + 3, 4, 4, 4, + 4, 5, 5, 5, + }; + *slots_per_op = slot_count_table[src_cnt - 1]; + return *slots_per_op; } #define ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024) diff --git a/include/asm-arm/arch-pxa/cm-x270.h b/include/asm-arm/arch-pxa/cm-x270.h deleted file mode 100644 index f8fac9e1800..00000000000 --- a/include/asm-arm/arch-pxa/cm-x270.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * linux/include/asm/arch-pxa/cm-x270.h - * - * Copyright Compulab Ltd., 2003, 2007 - * Mike Rapoport <mike@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - - -/* CM-x270 device physical addresses */ -#define CMX270_CS1_PHYS (PXA_CS1_PHYS) -#define MARATHON_PHYS (PXA_CS2_PHYS) -#define CMX270_IDE104_PHYS (PXA_CS3_PHYS) -#define CMX270_IT8152_PHYS (PXA_CS4_PHYS) - -/* Statically mapped regions */ -#define CMX270_VIRT_BASE (0xe8000000) -#define CMX270_IT8152_VIRT (CMX270_VIRT_BASE) -#define CMX270_IDE104_VIRT (CMX270_IT8152_VIRT + SZ_64M) - -/* GPIO related definitions */ -#define GPIO_IT8152_IRQ (22) - -#define IRQ_GPIO_IT8152_IRQ IRQ_GPIO(GPIO_IT8152_IRQ) -#define PME_IRQ IRQ_GPIO(0) -#define CMX270_IDE_IRQ IRQ_GPIO(100) -#define CMX270_GPIRQ1 IRQ_GPIO(101) -#define CMX270_TOUCHIRQ IRQ_GPIO(96) -#define CMX270_ETHIRQ IRQ_GPIO(10) -#define CMX270_GFXIRQ IRQ_GPIO(95) -#define CMX270_NANDIRQ IRQ_GPIO(89) -#define CMX270_MMC_IRQ IRQ_GPIO(83) - -/* PCMCIA related definitions */ -#define PCC_DETECT(x) (GPLR(84 - (x)) & GPIO_bit(84 - (x))) -#define PCC_READY(x) (GPLR(82 - (x)) & GPIO_bit(82 - (x))) - -#define PCMCIA_S0_CD_VALID IRQ_GPIO(84) -#define PCMCIA_S0_CD_VALID_EDGE GPIO_BOTH_EDGES - -#define PCMCIA_S1_CD_VALID IRQ_GPIO(83) -#define PCMCIA_S1_CD_VALID_EDGE GPIO_BOTH_EDGES - -#define PCMCIA_S0_RDYINT IRQ_GPIO(82) -#define PCMCIA_S1_RDYINT IRQ_GPIO(81) - -#define PCMCIA_RESET_GPIO 53 diff --git a/include/asm-arm/arch-pxa/eseries-gpio.h b/include/asm-arm/arch-pxa/eseries-gpio.h new file mode 100644 index 00000000000..4c90b131027 --- /dev/null +++ b/include/asm-arm/arch-pxa/eseries-gpio.h @@ -0,0 +1,50 @@ +/* + * eseries-gpio.h + * + * Copyright (C) Ian Molton <spyro@f2s.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +/* e-series power button */ +#define GPIO_ESERIES_POWERBTN 0 + +/* UDC GPIO definitions */ +#define GPIO_E7XX_USB_DISC 13 +#define GPIO_E7XX_USB_PULLUP 3 + +#define GPIO_E800_USB_DISC 4 +#define GPIO_E800_USB_PULLUP 84 + +/* e740 PCMCIA GPIO definitions */ +/* Note: PWR1 seems to be inverted */ +#define GPIO_E740_PCMCIA_CD0 8 +#define GPIO_E740_PCMCIA_CD1 44 +#define GPIO_E740_PCMCIA_RDY0 11 +#define GPIO_E740_PCMCIA_RDY1 6 +#define GPIO_E740_PCMCIA_RST0 27 +#define GPIO_E740_PCMCIA_RST1 24 +#define GPIO_E740_PCMCIA_PWR0 20 +#define GPIO_E740_PCMCIA_PWR1 23 + +/* e750 PCMCIA GPIO definitions */ +#define GPIO_E750_PCMCIA_CD0 8 +#define GPIO_E750_PCMCIA_RDY0 12 +#define GPIO_E750_PCMCIA_RST0 27 +#define GPIO_E750_PCMCIA_PWR0 20 + +/* e800 PCMCIA GPIO definitions */ +#define GPIO_E800_PCMCIA_RST0 69 +#define GPIO_E800_PCMCIA_RST1 72 +#define GPIO_E800_PCMCIA_PWR0 20 +#define GPIO_E800_PCMCIA_PWR1 73 + +/* e7xx IrDA power control */ +#define GPIO_E7XX_IR_ON 38 + +/* ASIC related GPIOs */ +#define GPIO_ESERIES_TMIO_IRQ 5 +#define GPIO_E800_ANGELX_IRQ 8 diff --git a/include/asm-arm/arch-pxa/eseries-irq.h b/include/asm-arm/arch-pxa/eseries-irq.h new file mode 100644 index 00000000000..f2a93d5e31d --- /dev/null +++ b/include/asm-arm/arch-pxa/eseries-irq.h @@ -0,0 +1,27 @@ +/* + * eseries-irq.h + * + * Copyright (C) Ian Molton <spyro@f2s.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8) +#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n)) + +#define ANGELX_RDY0_IRQ IRQ_ANGELX(0) +#define ANGELX_ST0_IRQ IRQ_ANGELX(1) +#define ANGELX_CD0_IRQ IRQ_ANGELX(2) +#define ANGELX_RDY1_IRQ IRQ_ANGELX(3) +#define ANGELX_ST1_IRQ IRQ_ANGELX(4) +#define ANGELX_CD1_IRQ IRQ_ANGELX(5) + +#define TMIO_IRQ_BASE (IRQ_BOARD_START+0) +#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n)) + +#define TMIO_SD_IRQ IRQ_TMIO(1) +#define TMIO_USB_IRQ IRQ_TMIO(2) + diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index d9af6dabc89..979a45695d7 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -69,6 +69,12 @@ _id == 0x212; \ }) +#define __cpu_is_pxa255(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x2d0; \ + }) + #define __cpu_is_pxa25x(id) \ ({ \ unsigned int _id = (id) >> 4 & 0xfff; \ @@ -76,6 +82,7 @@ }) #else #define __cpu_is_pxa21x(id) (0) +#define __cpu_is_pxa255(id) (0) #define __cpu_is_pxa25x(id) (0) #endif @@ -119,11 +126,26 @@ #define __cpu_is_pxa320(id) (0) #endif +#ifdef CONFIG_CPU_PXA930 +#define __cpu_is_pxa930(id) \ + ({ \ + unsigned int _id = (id) >> 4 & 0xfff; \ + _id == 0x683; \ + }) +#else +#define __cpu_is_pxa930(id) (0) +#endif + #define cpu_is_pxa21x() \ ({ \ __cpu_is_pxa21x(read_cpuid_id()); \ }) +#define cpu_is_pxa255() \ + ({ \ + __cpu_is_pxa255(read_cpuid_id()); \ + }) + #define cpu_is_pxa25x() \ ({ \ __cpu_is_pxa25x(read_cpuid_id()); \ @@ -149,6 +171,12 @@ __cpu_is_pxa320(read_cpuid_id()); \ }) +#define cpu_is_pxa930() \ + ({ \ + unsigned int id = read_cpuid(CPUID_ID); \ + __cpu_is_pxa930(id); \ + }) + /* * CPUID Core Generation Bit * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x @@ -196,6 +224,11 @@ extern void pxa_gpio_set_value(unsigned gpio, int value); */ extern unsigned int get_memclk_frequency_10khz(void); +/* + * register GPIO as reset generator + */ +extern int init_gpio_reset(int gpio); + #endif #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index b6c8fe37768..9413121b0ed 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -180,10 +180,13 @@ #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #elif defined(CONFIG_ARCH_LUBBOCK) || \ defined(CONFIG_MACH_LOGICPD_PXA270) || \ + defined(CONFIG_MACH_TOSA) || \ defined(CONFIG_MACH_MAINSTONE) || \ defined(CONFIG_MACH_PCM027) || \ defined(CONFIG_MACH_MAGICIAN) #define NR_IRQS (IRQ_BOARD_END) +#elif defined(CONFIG_MACH_ZYLONITE) +#define NR_IRQS (IRQ_BOARD_START + 32) #else #define NR_IRQS (IRQ_BOARD_START) #endif diff --git a/include/asm-arm/arch-pxa/mfp-pxa2xx.h b/include/asm-arm/arch-pxa/mfp-pxa2xx.h index db8d890d237..8de1c0dae62 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa2xx.h +++ b/include/asm-arm/arch-pxa/mfp-pxa2xx.h @@ -128,5 +128,6 @@ #define GPIO84_GPIO MFP_CFG_IN(GPIO84, AF0) extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num); +extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm); extern int gpio_set_wake(unsigned int gpio, unsigned int on); #endif /* __ASM_ARCH_MFP_PXA2XX_H */ diff --git a/include/asm-arm/arch-pxa/mfp-pxa930.h b/include/asm-arm/arch-pxa/mfp-pxa930.h new file mode 100644 index 00000000000..c4e945ab192 --- /dev/null +++ b/include/asm-arm/arch-pxa/mfp-pxa930.h @@ -0,0 +1,491 @@ +/* + * linux/include/asm-arm/arch-pxa/mfp-pxa930.h + * + * PXA930 specific MFP configuration definitions + * + * Copyright (C) 2007-2008 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MFP_PXA9xx_H +#define __ASM_ARCH_MFP_PXA9xx_H + +#include <asm/arch/mfp.h> +#include <asm/arch/mfp-pxa3xx.h> + +/* GPIO */ +#define GPIO46_GPIO MFP_CFG(GPIO46, AF0) +#define GPIO49_GPIO MFP_CFG(GPIO49, AF0) +#define GPIO50_GPIO MFP_CFG(GPIO50, AF0) +#define GPIO51_GPIO MFP_CFG(GPIO51, AF0) +#define GPIO52_GPIO MFP_CFG(GPIO52, AF0) +#define GPIO56_GPIO MFP_CFG(GPIO56, AF0) +#define GPIO58_GPIO MFP_CFG(GPIO58, AF0) +#define GPIO59_GPIO MFP_CFG(GPIO59, AF0) +#define GPIO60_GPIO MFP_CFG(GPIO60, AF0) +#define GPIO61_GPIO MFP_CFG(GPIO61, AF0) +#define GPIO62_GPIO MFP_CFG(GPIO62, AF0) + +#define GSIM_UCLK_GPIO_79 MFP_CFG(GSIM_UCLK, AF0) +#define GSIM_UIO_GPIO_80 MFP_CFG(GSIM_UIO, AF0) +#define GSIM_nURST_GPIO_81 MFP_CFG(GSIM_nURST, AF0) +#define GSIM_UDET_GPIO_82 MFP_CFG(GSIM_UDET, AF0) + +#define DF_IO15_GPIO_28 MFP_CFG(DF_IO15, AF0) +#define DF_IO14_GPIO_29 MFP_CFG(DF_IO14, AF0) +#define DF_IO13_GPIO_30 MFP_CFG(DF_IO13, AF0) +#define DF_IO12_GPIO_31 MFP_CFG(DF_IO12, AF0) +#define DF_IO11_GPIO_32 MFP_CFG(DF_IO11, AF0) +#define DF_IO10_GPIO_33 MFP_CFG(DF_IO10, AF0) +#define DF_IO9_GPIO_34 MFP_CFG(DF_IO9, AF0) +#define DF_IO8_GPIO_35 MFP_CFG(DF_IO8, AF0) +#define DF_IO7_GPIO_36 MFP_CFG(DF_IO7, AF0) +#define DF_IO6_GPIO_37 MFP_CFG(DF_IO6, AF0) +#define DF_IO5_GPIO_38 MFP_CFG(DF_IO5, AF0) +#define DF_IO4_GPIO_39 MFP_CFG(DF_IO4, AF0) +#define DF_IO3_GPIO_40 MFP_CFG(DF_IO3, AF0) +#define DF_IO2_GPIO_41 MFP_CFG(DF_IO2, AF0) +#define DF_IO1_GPIO_42 MFP_CFG(DF_IO1, AF0) +#define DF_IO0_GPIO_43 MFP_CFG(DF_IO0, AF0) +#define DF_nCS0_GPIO_44 MFP_CFG(DF_nCS0, AF0) +#define DF_nCS1_GPIO_45 MFP_CFG(DF_nCS1, AF0) +#define DF_nWE_GPIO_46 MFP_CFG(DF_nWE, AF0) +#define DF_nRE_nOE_GPIO_47 MFP_CFG(DF_nRE_nOE, AF0) +#define DF_CLE_nOE_GPIO_48 MFP_CFG(DF_CLE_nOE, AF0) +#define DF_nADV1_ALE_GPIO_49 MFP_CFG(DF_nADV1_ALE, AF0) +#define DF_nADV2_ALE_GPIO_50 MFP_CFG(DF_nADV2_ALE, AF0) +#define DF_INT_RnB_GPIO_51 MFP_CFG(DF_INT_RnB, AF0) +#define DF_SCLK_E_GPIO_52 MFP_CFG(DF_SCLK_E, AF0) + +#define DF_ADDR0_GPIO_53 MFP_CFG(DF_ADDR0, AF0) +#define DF_ADDR1_GPIO_54 MFP_CFG(DF_ADDR1, AF0) +#define DF_ADDR2_GPIO_55 MFP_CFG(DF_ADDR2, AF0) +#define DF_ADDR3_GPIO_56 MFP_CFG(DF_ADDR3, AF0) +#define nXCVREN_GPIO_57 MFP_CFG(nXCVREN, AF0) +#define nLUA_GPIO_58 MFP_CFG(nLUA, AF0) +#define nLLA_GPIO_59 MFP_CFG(nLLA, AF0) +#define nBE0_GPIO_60 MFP_CFG(nBE0, AF0) +#define nBE1_GPIO_61 MFP_CFG(nBE1, AF0) +#define RDY_GPIO_62 MFP_CFG(RDY, AF0) + +/* Chip Select */ +#define DF_nCS0_nCS2 MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH) +#define DF_nCS1_nCS3 MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH) + +/* AC97 */ +#define GPIO83_BAC97_SYSCLK MFP_CFG(GPIO83, AF3) +#define GPIO84_BAC97_SDATA_IN0 MFP_CFG(GPIO84, AF3) +#define GPIO85_BAC97_BITCLK MFP_CFG(GPIO85, AF3) +#define GPIO86_BAC97_nRESET MFP_CFG(GPIO86, AF3) +#define GPIO87_BAC97_SYNC MFP_CFG(GPIO87, AF3) +#define GPIO88_BAC97_SDATA_OUT MFP_CFG(GPIO88, AF3) + +/* I2C */ +#define GPIO39_CI2C_SCL MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH) +#define GPIO40_CI2C_SDA MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH) + +#define GPIO51_CI2C_SCL MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH) +#define GPIO52_CI2C_SDA MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH) + +#define GPIO63_CI2C_SCL MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH) +#define GPIO64_CI2C_SDA MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH) + +#define GPIO77_CI2C_SCL MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH) +#define GPIO78_CI2C_SDA MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH) + +#define GPIO89_CI2C_SCL MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH) +#define GPIO90_CI2C_SDA MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH) + +#define GPIO95_CI2C_SCL MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH) +#define GPIO96_CI2C_SDA MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH) + +#define GPIO97_CI2C_SCL MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH) +#define GPIO98_CI2C_SDA MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH) + +/* QCI */ +#define GPIO63_CI_DD_9 MFP_CFG_LPM(GPIO63, AF1, PULL_LOW) +#define GPIO64_CI_DD_8 MFP_CFG_LPM(GPIO64, AF1, PULL_LOW) +#define GPIO65_CI_DD_7 MFP_CFG_LPM(GPIO65, AF1, PULL_LOW) +#define GPIO66_CI_DD_6 MFP_CFG_LPM(GPIO66, AF1, PULL_LOW) +#define GPIO67_CI_DD_5 MFP_CFG_LPM(GPIO67, AF1, PULL_LOW) +#define GPIO68_CI_DD_4 MFP_CFG_LPM(GPIO68, AF1, PULL_LOW) +#define GPIO69_CI_DD_3 MFP_CFG_LPM(GPIO69, AF1, PULL_LOW) +#define GPIO70_CI_DD_2 MFP_CFG_LPM(GPIO70, AF1, PULL_LOW) +#define GPIO71_CI_DD_1 MFP_CFG_LPM(GPIO71, AF1, PULL_LOW) +#define GPIO72_CI_DD_0 MFP_CFG_LPM(GPIO72, AF1, PULL_LOW) +#define GPIO73_CI_HSYNC MFP_CFG_LPM(GPIO73, AF1, PULL_LOW) +#define GPIO74_CI_VSYNC MFP_CFG_LPM(GPIO74, AF1, PULL_LOW) +#define GPIO75_CI_MCLK MFP_CFG_LPM(GPIO75, AF1, PULL_LOW) +#define GPIO76_CI_PCLK MFP_CFG_LPM(GPIO76, AF1, PULL_LOW) + +/* KEYPAD */ +#define GPIO4_KP_DKIN_4 MFP_CFG_LPM(GPIO4, AF3, FLOAT) +#define GPIO5_KP_DKIN_5 MFP_CFG_LPM(GPIO5, AF3, FLOAT) +#define GPIO6_KP_DKIN_6 MFP_CFG_LPM(GPIO6, AF3, FLOAT) +#define GPIO7_KP_DKIN_7 MFP_CFG_LPM(GPIO7, AF3, FLOAT) +#define GPIO8_KP_DKIN_4 MFP_CFG_LPM(GPIO8, AF3, FLOAT) +#define GPIO9_KP_DKIN_5 MFP_CFG_LPM(GPIO9, AF3, FLOAT) +#define GPIO10_KP_DKIN_6 MFP_CFG_LPM(GPIO10, AF3, FLOAT) +#define GPIO11_KP_DKIN_7 MFP_CFG_LPM(GPIO11, AF3, FLOAT) + +#define GPIO12_KP_DKIN_0 MFP_CFG_LPM(GPIO12, AF2, FLOAT) +#define GPIO13_KP_DKIN_1 MFP_CFG_LPM(GPIO13, AF2, FLOAT) +#define GPIO14_KP_DKIN_2 MFP_CFG_LPM(GPIO14, AF2, FLOAT) +#define GPIO15_KP_DKIN_3 MFP_CFG_LPM(GPIO15, AF2, FLOAT) + +#define GPIO41_KP_DKIN_0 MFP_CFG_LPM(GPIO41, AF2, FLOAT) +#define GPIO42_KP_DKIN_1 MFP_CFG_LPM(GPIO42, AF2, FLOAT) +#define GPIO43_KP_DKIN_2 MFP_CFG_LPM(GPIO43, AF2, FLOAT) +#define GPIO44_KP_DKIN_3 MFP_CFG_LPM(GPIO44, AF2, FLOAT) +#define GPIO41_KP_DKIN_4 MFP_CFG_LPM(GPIO41, AF4, FLOAT) +#define GPIO42_KP_DKIN_5 MFP_CFG_LPM(GPIO42, AF4, FLOAT) + +#define GPIO0_KP_MKIN_0 MFP_CFG_LPM(GPIO0, AF1, FLOAT) +#define GPIO2_KP_MKIN_1 MFP_CFG_LPM(GPIO2, AF1, FLOAT) +#define GPIO4_KP_MKIN_2 MFP_CFG_LPM(GPIO4, AF1, FLOAT) +#define GPIO6_KP_MKIN_3 MFP_CFG_LPM(GPIO6, AF1, FLOAT) +#define GPIO8_KP_MKIN_4 MFP_CFG_LPM(GPIO8, AF1, FLOAT) +#define GPIO10_KP_MKIN_5 MFP_CFG_LPM(GPIO10, AF1, FLOAT) +#define GPIO12_KP_MKIN_6 MFP_CFG_LPM(GPIO12, AF1, FLOAT) +#define GPIO14_KP_MKIN_7 MFP_CFG(GPIO14, AF1) +#define GPIO35_KP_MKIN_5 MFP_CFG(GPIO35, AF4) + +#define GPIO1_KP_MKOUT_0 MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH) +#define GPIO3_KP_MKOUT_1 MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH) +#define GPIO5_KP_MKOUT_2 MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH) +#define GPIO7_KP_MKOUT_3 MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH) +#define GPIO9_KP_MKOUT_4 MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH) +#define GPIO11_KP_MKOUT_5 MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH) +#define GPIO13_KP_MKOUT_6 MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH) +#define GPIO15_KP_MKOUT_7 MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH) +#define GPIO36_KP_MKOUT_5 MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH) + +/* LCD */ +#define GPIO17_LCD_FCLK_RD MFP_CFG(GPIO17, AF1) +#define GPIO18_LCD_LCLK_A0 MFP_CFG(GPIO18, AF1) +#define GPIO19_LCD_PCLK_WR MFP_CFG(GPIO19, AF1) +#define GPIO20_LCD_BIAS MFP_CFG(GPIO20, AF1) +#define GPIO21_LCD_CS MFP_CFG(GPIO21, AF1) +#define GPIO22_LCD_CS2 MFP_CFG(GPIO22, AF2) +#define GPIO22_LCD_VSYNC MFP_CFG(GPIO22, AF1) +#define GPIO23_LCD_DD0 MFP_CFG(GPIO23, AF1) +#define GPIO24_LCD_DD1 MFP_CFG(GPIO24, AF1) +#define GPIO25_LCD_DD2 MFP_CFG(GPIO25, AF1) +#define GPIO26_LCD_DD3 MFP_CFG(GPIO26, AF1) +#define GPIO27_LCD_DD4 MFP_CFG(GPIO27, AF1) +#define GPIO28_LCD_DD5 MFP_CFG(GPIO28, AF1) +#define GPIO29_LCD_DD6 MFP_CFG(GPIO29, AF1) +#define GPIO30_LCD_DD7 MFP_CFG(GPIO30, AF1) +#define GPIO31_LCD_DD8 MFP_CFG(GPIO31, AF1) +#define GPIO32_LCD_DD9 MFP_CFG(GPIO32, AF1) +#define GPIO33_LCD_DD10 MFP_CFG(GPIO33, AF1) +#define GPIO34_LCD_DD11 MFP_CFG(GPIO34, AF1) +#define GPIO35_LCD_DD12 MFP_CFG(GPIO35, AF1) +#define GPIO36_LCD_DD13 MFP_CFG(GPIO36, AF1) +#define GPIO37_LCD_DD14 MFP_CFG(GPIO37, AF1) +#define GPIO38_LCD_DD15 MFP_CFG(GPIO38, AF1) +#define GPIO39_LCD_DD16 MFP_CFG(GPIO39, AF1) +#define GPIO40_LCD_DD17 MFP_CFG(GPIO40, AF1) +#define GPIO41_LCD_CS2 MFP_CFG(GPIO41, AF3) +#define GPIO42_LCD_VSYNC2 MFP_CFG(GPIO42, AF3) +#define GPIO44_LCD_DD7 MFP_CFG(GPIO44, AF1) + +/* Mini-LCD */ +#define GPIO17_MLCD_FCLK MFP_CFG(GPIO17, AF3) +#define GPIO18_MLCD_LCLK MFP_CFG(GPIO18, AF3) +#define GPIO19_MLCD_PCLK MFP_CFG(GPIO19, AF3) +#define GPIO20_MLCD_BIAS MFP_CFG(GPIO20, AF3) +#define GPIO23_MLCD_DD0 MFP_CFG(GPIO23, AF3) +#define GPIO24_MLCD_DD1 MFP_CFG(GPIO24, AF3) +#define GPIO25_MLCD_DD2 MFP_CFG(GPIO25, AF3) +#define GPIO26_MLCD_DD3 MFP_CFG(GPIO26, AF3) +#define GPIO27_MLCD_DD4 MFP_CFG(GPIO27, AF3) +#define GPIO28_MLCD_DD5 MFP_CFG(GPIO28, AF3) +#define GPIO29_MLCD_DD6 MFP_CFG(GPIO29, AF3) +#define GPIO30_MLCD_DD7 MFP_CFG(GPIO30, AF3) +#define GPIO31_MLCD_DD8 MFP_CFG(GPIO31, AF3) +#define GPIO32_MLCD_DD9 MFP_CFG(GPIO32, AF3) +#define GPIO33_MLCD_DD10 MFP_CFG(GPIO33, AF3) +#define GPIO34_MLCD_DD11 MFP_CFG(GPIO34, AF3) +#define GPIO35_MLCD_DD12 MFP_CFG(GPIO35, AF3) +#define GPIO36_MLCD_DD13 MFP_CFG(GPIO36, AF3) +#define GPIO37_MLCD_DD14 MFP_CFG(GPIO37, AF3) +#define GPIO38_MLCD_DD15 MFP_CFG(GPIO38, AF3) +#define GPIO44_MLCD_DD7 MFP_CFG(GPIO44, AF5) + +/* MMC1 */ +#define GPIO10_MMC1_DAT3 MFP_CFG(GPIO10, AF4) +#define GPIO11_MMC1_DAT2 MFP_CFG(GPIO11, AF4) +#define GPIO12_MMC1_DAT1 MFP_CFG(GPIO12, AF4) +#define GPIO13_MMC1_DAT0 MFP_CFG(GPIO13, AF4) +#define GPIO14_MMC1_CMD MFP_CFG(GPIO14, AF4) +#define GPIO15_MMC1_CLK MFP_CFG(GPIO15, AF4) +#define GPIO55_MMC1_CMD MFP_CFG(GPIO55, AF3) +#define GPIO56_MMC1_CLK MFP_CFG(GPIO56, AF3) +#define GPIO57_MMC1_DAT0 MFP_CFG(GPIO57, AF3) +#define GPIO58_MMC1_DAT1 MFP_CFG(GPIO58, AF3) +#define GPIO59_MMC1_DAT2 MFP_CFG(GPIO59, AF3) +#define GPIO60_MMC1_DAT3 MFP_CFG(GPIO60, AF3) + +#define DF_ADDR0_MMC1_CLK MFP_CFG(DF_ADDR0, AF2) +#define DF_ADDR1_MMC1_CMD MFP_CFG(DF_ADDR1, AF2) +#define DF_ADDR2_MMC1_DAT0 MFP_CFG(DF_ADDR2, AF2) +#define DF_ADDR3_MMC1_DAT1 MFP_CFG(DF_ADDR3, AF3) +#define nXCVREN_MMC1_DAT2 MFP_CFG(nXCVREN, AF2) + +/* MMC2 */ +#define GPIO31_MMC2_CMD MFP_CFG(GPIO31, AF7) +#define GPIO32_MMC2_CLK MFP_CFG(GPIO32, AF7) +#define GPIO33_MMC2_DAT0 MFP_CFG(GPIO33, AF7) +#define GPIO34_MMC2_DAT1 MFP_CFG(GPIO34, AF7) +#define GPIO35_MMC2_DAT2 MFP_CFG(GPIO35, AF7) +#define GPIO36_MMC2_DAT3 MFP_CFG(GPIO36, AF7) + +#define GPIO101_MMC2_DAT3 MFP_CFG(GPIO101, AF1) +#define GPIO102_MMC2_DAT2 MFP_CFG(GPIO102, AF1) +#define GPIO103_MMC2_DAT1 MFP_CFG(GPIO103, AF1) +#define GPIO104_MMC2_DAT0 MFP_CFG(GPIO104, AF1) +#define GPIO105_MMC2_CMD MFP_CFG(GPIO105, AF1) +#define GPIO106_MMC2_CLK MFP_CFG(GPIO106, AF1) + +#define DF_IO10_MMC2_DAT3 MFP_CFG(DF_IO10, AF3) +#define DF_IO11_MMC2_DAT2 MFP_CFG(DF_IO11, AF3) +#define DF_IO12_MMC2_DAT1 MFP_CFG(DF_IO12, AF3) +#define DF_IO13_MMC2_DAT0 MFP_CFG(DF_IO13, AF3) +#define DF_IO14_MMC2_CLK MFP_CFG(DF_IO14, AF3) +#define DF_IO15_MMC2_CMD MFP_CFG(DF_IO15, AF3) + +/* BSSP1 */ +#define GPIO12_BSSP1_CLK MFP_CFG(GPIO12, AF3) +#define GPIO13_BSSP1_FRM MFP_CFG(GPIO13, AF3) +#define GPIO14_BSSP1_RXD MFP_CFG(GPIO14, AF3) +#define GPIO15_BSSP1_TXD MFP_CFG(GPIO15, AF3) +#define GPIO97_BSSP1_CLK MFP_CFG(GPIO97, AF5) +#define GPIO98_BSSP1_FRM MFP_CFG(GPIO98, AF5) + +/* BSSP2 */ +#define GPIO84_BSSP2_SDATA_IN MFP_CFG(GPIO84, AF1) +#define GPIO85_BSSP2_BITCLK MFP_CFG(GPIO85, AF1) +#define GPIO86_BSSP2_SYSCLK MFP_CFG(GPIO86, AF1) +#define GPIO87_BSSP2_SYNC MFP_CFG(GPIO87, AF1) +#define GPIO88_BSSP2_DATA_OUT MFP_CFG(GPIO88, AF1) +#define GPIO86_BSSP2_SDATA_IN MFP_CFG(GPIO86, AF4) + +/* BSSP3 */ +#define GPIO79_BSSP3_CLK MFP_CFG(GPIO79, AF1) +#define GPIO80_BSSP3_FRM MFP_CFG(GPIO80, AF1) +#define GPIO81_BSSP3_TXD MFP_CFG(GPIO81, AF1) +#define GPIO82_BSSP3_RXD MFP_CFG(GPIO82, AF1) +#define GPIO83_BSSP3_SYSCLK MFP_CFG(GPIO83, AF1) + +/* BSSP4 */ +#define GPIO43_BSSP4_CLK MFP_CFG(GPIO43, AF4) +#define GPIO44_BSSP4_FRM MFP_CFG(GPIO44, AF4) +#define GPIO45_BSSP4_TXD MFP_CFG(GPIO45, AF4) +#define GPIO46_BSSP4_RXD MFP_CFG(GPIO46, AF4) + +#define GPIO51_BSSP4_CLK MFP_CFG(GPIO51, AF4) +#define GPIO52_BSSP4_FRM MFP_CFG(GPIO52, AF4) +#define GPIO53_BSSP4_TXD MFP_CFG(GPIO53, AF4) +#define GPIO54_BSSP4_RXD MFP_CFG(GPIO54, AF4) + +/* GSSP1 */ +#define GPIO79_GSSP1_CLK MFP_CFG(GPIO79, AF2) +#define GPIO80_GSSP1_FRM MFP_CFG(GPIO80, AF2) +#define GPIO81_GSSP1_TXD MFP_CFG(GPIO81, AF2) +#define GPIO82_GSSP1_RXD MFP_CFG(GPIO82, AF2) +#define GPIO83_GSSP1_SYSCLK MFP_CFG(GPIO83, AF2) + +#define GPIO93_GSSP1_CLK MFP_CFG(GPIO93, AF4) +#define GPIO94_GSSP1_FRM MFP_CFG(GPIO94, AF4) +#define GPIO95_GSSP1_TXD MFP_CFG(GPIO95, AF4) +#define GPIO96_GSSP1_RXD MFP_CFG(GPIO96, AF4) + +/* GSSP2 */ +#define GPIO47_GSSP2_CLK MFP_CFG(GPIO47, AF4) +#define GPIO48_GSSP2_FRM MFP_CFG(GPIO48, AF4) +#define GPIO49_GSSP2_RXD MFP_CFG(GPIO49, AF4) +#define GPIO50_GSSP2_TXD MFP_CFG(GPIO50, AF4) + +#define GPIO69_GSSP2_CLK MFP_CFG(GPIO69, AF4) +#define GPIO70_GSSP2_FRM MFP_CFG(GPIO70, AF4) +#define GPIO71_GSSP2_RXD MFP_CFG(GPIO71, AF4) +#define GPIO72_GSSP2_TXD MFP_CFG(GPIO72, AF4) + +#define GPIO84_GSSP2_RXD MFP_CFG(GPIO84, AF2) +#define GPIO85_GSSP2_CLK MFP_CFG(GPIO85, AF2) +#define GPIO86_GSSP2_SYSCLK MFP_CFG(GPIO86, AF2) +#define GPIO87_GSSP2_FRM MFP_CFG(GPIO87, AF2) +#define GPIO88_GSSP2_TXD MFP_CFG(GPIO88, AF2) +#define GPIO86_GSSP2_RXD MFP_CFG(GPIO86, AF5) + +#define GPIO103_GSSP2_CLK MFP_CFG(GPIO103, AF2) +#define GPIO104_GSSP2_FRM MFP_CFG(GPIO104, AF2) +#define GPIO105_GSSP2_RXD MFP_CFG(GPIO105, AF2) +#define GPIO106_GSSP2_TXD MFP_CFG(GPIO106, AF2) + +/* UART1 - FFUART */ +#define GPIO47_UART1_DSR_N MFP_CFG(GPIO47, AF1) +#define GPIO48_UART1_DTR_N MFP_CFG(GPIO48, AF1) +#define GPIO49_UART1_RI MFP_CFG(GPIO49, AF1) +#define GPIO50_UART1_DCD MFP_CFG(GPIO50, AF1) +#define GPIO51_UART1_CTS MFP_CFG(GPIO51, AF1) +#define GPIO52_UART1_RTS MFP_CFG(GPIO52, AF1) +#define GPIO53_UART1_RXD MFP_CFG(GPIO53, AF1) +#define GPIO54_UART1_TXD MFP_CFG(GPIO54, AF1) + +#define GPIO63_UART1_TXD MFP_CFG(GPIO63, AF2) +#define GPIO64_UART1_RXD MFP_CFG(GPIO64, AF2) +#define GPIO65_UART1_DSR MFP_CFG(GPIO65, AF2) +#define GPIO66_UART1_DTR MFP_CFG(GPIO66, AF2) +#define GPIO67_UART1_RI MFP_CFG(GPIO67, AF2) +#define GPIO68_UART1_DCD MFP_CFG(GPIO68, AF2) +#define GPIO69_UART1_CTS MFP_CFG(GPIO69, AF2) +#define GPIO70_UART1_RTS MFP_CFG(GPIO70, AF2) + +/* UART2 - BTUART */ +#define GPIO91_UART2_RXD MFP_CFG(GPIO91, AF1) +#define GPIO92_UART2_TXD MFP_CFG(GPIO92, AF1) +#define GPIO93_UART2_CTS MFP_CFG(GPIO93, AF1) +#define GPIO94_UART2_RTS MFP_CFG(GPIO94, AF1) + +/* UART3 - STUART */ +#define GPIO43_UART3_RTS MFP_CFG(GPIO43, AF3) +#define GPIO44_UART3_CTS MFP_CFG(GPIO44, AF3) +#define GPIO45_UART3_RXD MFP_CFG(GPIO45, AF3) +#define GPIO46_UART3_TXD MFP_CFG(GPIO46, AF3) + +#define GPIO75_UART3_RTS MFP_CFG(GPIO75, AF5) +#define GPIO76_UART3_CTS MFP_CFG(GPIO76, AF5) +#define GPIO77_UART3_TXD MFP_CFG(GPIO77, AF5) +#define GPIO78_UART3_RXD MFP_CFG(GPIO78, AF5) + +/* DFI */ +#define DF_IO0_DF_IO0 MFP_CFG(DF_IO0, AF2) +#define DF_IO1_DF_IO1 MFP_CFG(DF_IO1, AF2) +#define DF_IO2_DF_IO2 MFP_CFG(DF_IO2, AF2) +#define DF_IO3_DF_IO3 MFP_CFG(DF_IO3, AF2) +#define DF_IO4_DF_IO4 MFP_CFG(DF_IO4, AF2) +#define DF_IO5_DF_IO5 MFP_CFG(DF_IO5, AF2) +#define DF_IO6_DF_IO6 MFP_CFG(DF_IO6, AF2) +#define DF_IO7_DF_IO7 MFP_CFG(DF_IO7, AF2) +#define DF_IO8_DF_IO8 MFP_CFG(DF_IO8, AF2) +#define DF_IO9_DF_IO9 MFP_CFG(DF_IO9, AF2) +#define DF_IO10_DF_IO10 MFP_CFG(DF_IO10, AF2) +#define DF_IO11_DF_IO11 MFP_CFG(DF_IO11, AF2) +#define DF_IO12_DF_IO12 MFP_CFG(DF_IO12, AF2) +#define DF_IO13_DF_IO13 MFP_CFG(DF_IO13, AF2) +#define DF_IO14_DF_IO14 MFP_CFG(DF_IO14, AF2) +#define DF_IO15_DF_IO15 MFP_CFG(DF_IO15, AF2) +#define DF_nADV1_ALE_DF_nADV1 MFP_CFG(DF_nADV1_ALE, AF2) +#define DF_nADV2_ALE_DF_nADV2 MFP_CFG(DF_nADV2_ALE, AF2) +#define DF_nCS0_DF_nCS0 MFP_CFG(DF_nCS0, AF2) +#define DF_nCS1_DF_nCS1 MFP_CFG(DF_nCS1, AF2) +#define DF_nRE_nOE_DF_nOE MFP_CFG(DF_nRE_nOE, AF2) +#define DF_nWE_DF_nWE MFP_CFG(DF_nWE, AF2) + +/* DFI - NAND */ +#define DF_CLE_nOE_ND_CLE MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH) +#define DF_INT_RnB_ND_INT_RnB MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW) +#define DF_IO0_ND_IO0 MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW) +#define DF_IO1_ND_IO1 MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW) +#define DF_IO2_ND_IO2 MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW) +#define DF_IO3_ND_IO3 MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW) +#define DF_IO4_ND_IO4 MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW) +#define DF_IO5_ND_IO5 MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW) +#define DF_IO6_ND_IO6 MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW) +#define DF_IO7_ND_IO7 MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW) +#define DF_IO8_ND_IO8 MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW) +#define DF_IO9_ND_IO9 MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW) +#define DF_IO10_ND_IO10 MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW) +#define DF_IO11_ND_IO11 MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW) +#define DF_IO12_ND_IO12 MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW) +#define DF_IO13_ND_IO13 MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW) +#define DF_IO14_ND_IO14 MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW) +#define DF_IO15_ND_IO15 MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW) +#define DF_nADV1_ALE_ND_ALE MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH) +#define DF_nADV2_ALE_ND_ALE MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH) +#define DF_nADV2_ALE_nCS3 MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH) +#define DF_nCS0_ND_nCS0 MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH) +#define DF_nCS1_ND_nCS1 MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH) +#define DF_nRE_nOE_ND_nRE MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH) +#define DF_nWE_ND_nWE MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH) + +/* PWM */ +#define GPIO41_PWM0 MFP_CFG_LPM(GPIO41, AF1, PULL_LOW) +#define GPIO42_PWM1 MFP_CFG_LPM(GPIO42, AF1, PULL_LOW) +#define GPIO43_PWM3 MFP_CFG_LPM(GPIO43, AF1, PULL_LOW) +#define GPIO20_PWM0 MFP_CFG_LPM(GPIO20, AF2, PULL_LOW) +#define GPIO21_PWM2 MFP_CFG_LPM(GPIO21, AF3, PULL_LOW) +#define GPIO22_PWM3 MFP_CFG_LPM(GPIO22, AF3, PULL_LOW) + +/* CIR */ +#define GPIO46_CIR_OUT MFP_CFG(GPIO46, AF1) +#define GPIO77_CIR_OUT MFP_CFG(GPIO77, AF3) + +/* USB P2 */ +#define GPIO0_USB_P2_7 MFP_CFG(GPIO0, AF3) +#define GPIO15_USB_P2_7 MFP_CFG(GPIO15, AF5) +#define GPIO16_USB_P2_7 MFP_CFG(GPIO16, AF2) +#define GPIO48_USB_P2_7 MFP_CFG(GPIO48, AF7) +#define GPIO49_USB_P2_7 MFP_CFG(GPIO49, AF6) +#define DF_IO9_USB_P2_7 MFP_CFG(DF_IO9, AF3) + +#define GPIO48_USB_P2_8 MFP_CFG(GPIO48, AF2) +#define GPIO50_USB_P2_7 MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT) +#define GPIO51_USB_P2_5 MFP_CFG(GPIO51, AF2) +#define GPIO47_USB_P2_4 MFP_CFG(GPIO47, AF2) +#define GPIO53_USB_P2_3 MFP_CFG(GPIO53, AF2) +#define GPIO54_USB_P2_6 MFP_CFG(GPIO54, AF2) +#define GPIO49_USB_P2_2 MFP_CFG(GPIO49, AF2) +#define GPIO52_USB_P2_1 MFP_CFG(GPIO52, AF2) + +#define GPIO63_USB_P2_8 MFP_CFG(GPIO63, AF3) +#define GPIO64_USB_P2_7 MFP_CFG(GPIO64, AF3) +#define GPIO65_USB_P2_6 MFP_CFG(GPIO65, AF3) +#define GPIO66_USG_P2_5 MFP_CFG(GPIO66, AF3) +#define GPIO67_USB_P2_4 MFP_CFG(GPIO67, AF3) +#define GPIO68_USB_P2_3 MFP_CFG(GPIO68, AF3) +#define GPIO69_USB_P2_2 MFP_CFG(GPIO69, AF3) +#define GPIO70_USB_P2_1 MFP_CFG(GPIO70, AF3) + +/* ULPI */ +#define GPIO31_USB_ULPI_D0 MFP_CFG(GPIO31, AF4) +#define GPIO30_USB_ULPI_D1 MFP_CFG(GPIO30, AF7) +#define GPIO33_USB_ULPI_D2 MFP_CFG(GPIO33, AF5) +#define GPIO34_USB_ULPI_D3 MFP_CFG(GPIO34, AF5) +#define GPIO35_USB_ULPI_D4 MFP_CFG(GPIO35, AF5) +#define GPIO36_USB_ULPI_D5 MFP_CFG(GPIO36, AF5) +#define GPIO41_USB_ULPI_D6 MFP_CFG(GPIO41, AF5) +#define GPIO42_USB_ULPI_D7 MFP_CFG(GPIO42, AF5) +#define GPIO37_USB_ULPI_DIR MFP_CFG(GPIO37, AF4) +#define GPIO38_USB_ULPI_CLK MFP_CFG(GPIO38, AF4) +#define GPIO39_USB_ULPI_STP MFP_CFG(GPIO39, AF4) +#define GPIO40_USB_ULPI_NXT MFP_CFG(GPIO40, AF4) + +#define GPIO3_CLK26MOUTDMD MFP_CFG(GPIO3, AF3) +#define GPIO40_CLK26MOUTDMD MFP_CFG(GPIO40, AF7) +#define GPIO94_CLK26MOUTDMD MFP_CFG(GPIO94, AF5) +#define GPIO104_CLK26MOUTDMD MFP_CFG(GPIO104, AF4) +#define DF_ADDR1_CLK26MOUTDMD MFP_CFG(DF_ADDR2, AF3) +#define DF_ADDR3_CLK26MOUTDMD MFP_CFG(DF_ADDR3, AF3) + +#define GPIO14_CLK26MOUT MFP_CFG(GPIO14, AF5) +#define GPIO38_CLK26MOUT MFP_CFG(GPIO38, AF7) +#define GPIO92_CLK26MOUT MFP_CFG(GPIO92, AF5) +#define GPIO105_CLK26MOUT MFP_CFG(GPIO105, AF4) + +#define GPIO2_CLK13MOUTDMD MFP_CFG(GPIO2, AF3) +#define GPIO39_CLK13MOUTDMD MFP_CFG(GPIO39, AF7) +#define GPIO50_CLK13MOUTDMD MFP_CFG(GPIO50, AF3) +#define GPIO93_CLK13MOUTDMD MFP_CFG(GPIO93, AF5) +#define GPIO103_CLK13MOUTDMD MFP_CFG(GPIO103, AF4) +#define DF_ADDR2_CLK13MOUTDMD MFP_CFG(DF_ADDR2, AF3) + +/* 1 wire */ +#define GPIO95_OW_DQ_IN MFP_CFG(GPIO95, AF5) + +#endif /* __ASM_ARCH_MFP_PXA9xx_H */ diff --git a/include/asm-arm/arch-pxa/mfp.h b/include/asm-arm/arch-pxa/mfp.h index 02f6157396d..e7d58798da6 100644 --- a/include/asm-arm/arch-pxa/mfp.h +++ b/include/asm-arm/arch-pxa/mfp.h @@ -210,6 +210,14 @@ enum { MFP_PIN_DF_IO14, MFP_PIN_DF_IO15, + /* additional pins on PXA930 */ + MFP_PIN_GSIM_UIO, + MFP_PIN_GSIM_UCLK, + MFP_PIN_GSIM_UDET, + MFP_PIN_GSIM_nURST, + MFP_PIN_PMIC_INT, + MFP_PIN_RDY, + MFP_PIN_MAX, }; diff --git a/include/asm-arm/arch-pxa/palmtx.h b/include/asm-arm/arch-pxa/palmtx.h new file mode 100644 index 00000000000..1e8bccbda51 --- /dev/null +++ b/include/asm-arm/arch-pxa/palmtx.h @@ -0,0 +1,106 @@ +/* + * GPIOs and interrupts for Palm T|X Handheld Computer + * + * Based on palmld-gpio.h by Alex Osborne + * + * Authors: Marek Vasut <marek.vasut@gmail.com> + * Cristiano P. <cristianop@users.sourceforge.net> + * Jan Herman <2hp@seznam.cz> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMTX_H_ +#define _INCLUDE_PALMTX_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMTX_GPIO_RESET 1 + +#define GPIO_NR_PALMTX_POWER_DETECT 12 /* 90 */ +#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N 10 +#define GPIO_NR_PALMTX_EARPHONE_DETECT 107 + +/* SD/MMC */ +#define GPIO_NR_PALMTX_SD_DETECT_N 14 +#define GPIO_NR_PALMTX_SD_POWER 114 /* probably */ +#define GPIO_NR_PALMTX_SD_READONLY 115 /* probably */ + +/* TOUCHSCREEN */ +#define GPIO_NR_PALMTX_WM9712_IRQ 27 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMTX_IR_DISABLE 40 + +/* USB */ +#define GPIO_NR_PALMTX_USB_DETECT_N 13 +#define GPIO_NR_PALMTX_USB_POWER 95 +#define GPIO_NR_PALMTX_USB_PULLUP 93 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMTX_BL_POWER 84 +#define GPIO_NR_PALMTX_LCD_POWER 96 + +/* LCD BORDER */ +#define GPIO_NR_PALMTX_BORDER_SWITCH 98 +#define GPIO_NR_PALMTX_BORDER_SELECT 22 + +/* BLUETOOTH */ +#define GPIO_NR_PALMTX_BT_POWER 17 +#define GPIO_NR_PALMTX_BT_RESET 83 + +/* PCMCIA (WiFi) */ +#define GPIO_NR_PALMTX_PCMCIA_POWER1 94 +#define GPIO_NR_PALMTX_PCMCIA_POWER2 108 +#define GPIO_NR_PALMTX_PCMCIA_RESET 79 +#define GPIO_NR_PALMTX_PCMCIA_READY 116 + +/* NAND Flash ... this GPIO may be incorrect! */ +#define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79 + +/* INTERRUPTS */ +#define IRQ_GPIO_PALMTX_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N) +#define IRQ_GPIO_PALMTX_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ) +#define IRQ_GPIO_PALMTX_USB_DETECT IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT) +#define IRQ_GPIO_PALMTX_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET) + +/** HERE ARE INIT VALUES **/ + +/* Various addresses */ +#define PALMTX_PCMCIA_PHYS 0x28000000 +#define PALMTX_PCMCIA_VIRT 0xf0000000 +#define PALMTX_PCMCIA_SIZE 0x100000 + +#define PALMTX_PHYS_RAM_START 0xa0000000 +#define PALMTX_PHYS_IO_START 0x40000000 + +#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ +#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ + +/* TOUCHSCREEN */ +#define AC97_LINK_FRAME 21 + + +/* BATTERY */ +#define PALMTX_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMTX_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMTX_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTX_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMTX_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMTX_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMTX_MAX_LIFE_MINS 360 /* on-life in minutes */ + +#define PALMTX_BAT_MEASURE_DELAY (HZ * 1) + +/* BACKLIGHT */ +#define PALMTX_MAX_INTENSITY 0xFE +#define PALMTX_DEFAULT_INTENSITY 0x7E +#define PALMTX_LIMIT_MASK 0x7F +#define PALMTX_PRESCALER 0x3F +#define PALMTX_PERIOD_NS 3500 + +#endif diff --git a/include/asm-arm/arch-pxa/pxa27x-udc.h b/include/asm-arm/arch-pxa/pxa27x-udc.h index bc1cf7d0773..ab1443f8bd8 100644 --- a/include/asm-arm/arch-pxa/pxa27x-udc.h +++ b/include/asm-arm/arch-pxa/pxa27x-udc.h @@ -97,7 +97,7 @@ #define UP2OCR_IDON (1 << 10) /* OTG ID Read Enable */ #define UP2OCR_HXS (1 << 16) /* Host Port 2 Transceiver Output Select */ #define UP2OCR_HXOE (1 << 17) /* Host Port 2 Transceiver Output Enable */ -#define UP2OCR_SEOS (1 << 24) /* Single-Ended Output Select */ +#define UP2OCR_SEOS(x) ((x & 7) << 24) /* Single-Ended Output Select */ #define UDCCSN(x) __REG2(0x40600100, (x) << 2) #define UDCCSR0 __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */ diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h index 3459fb26ce9..2206cb61a9f 100644 --- a/include/asm-arm/arch-pxa/pxa2xx_spi.h +++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h @@ -41,4 +41,6 @@ struct pxa2xx_spi_chip { void (*cs_control)(u32 command); }; +extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info); + #endif /*PXA2XX_SPI_H_*/ diff --git a/include/asm-arm/arch-pxa/pxa3xx_nand.h b/include/asm-arm/arch-pxa/pxa3xx_nand.h index 81a8937486c..eb4b190b665 100644 --- a/include/asm-arm/arch-pxa/pxa3xx_nand.h +++ b/include/asm-arm/arch-pxa/pxa3xx_nand.h @@ -15,4 +15,6 @@ struct pxa3xx_nand_platform_data { struct mtd_partition *parts; unsigned int nr_parts; }; + +extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info); #endif /* __ASM_ARCH_PXA3XX_NAND_H */ diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h index bbd22396841..daf018d0c60 100644 --- a/include/asm-arm/arch-pxa/pxafb.h +++ b/include/asm-arm/arch-pxa/pxafb.h @@ -71,7 +71,8 @@ struct pxafb_mode_info { u_char bpp; u_int cmap_greyscale:1, - unused:31; + depth:8, + unused:23; /* Parallel Mode Timing */ u_char hsync_len; diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h index 3ba464c913a..820a189684a 100644 --- a/include/asm-arm/arch-pxa/regs-lcd.h +++ b/include/asm-arm/arch-pxa/regs-lcd.h @@ -27,6 +27,12 @@ #define LCCR3_4BPP (2 << 24) #define LCCR3_8BPP (3 << 24) #define LCCR3_16BPP (4 << 24) +#define LCCR3_18BPP (5 << 24) +#define LCCR3_18BPP_P (6 << 24) +#define LCCR3_19BPP (7 << 24) +#define LCCR3_19BPP_P (1 << 29) +#define LCCR3_24BPP ((1 << 29) | (1 << 24)) +#define LCCR3_25BPP ((1 << 29) | (2 << 24)) #define LCCR3_PDFOR_0 (0 << 30) #define LCCR3_PDFOR_1 (1 << 30) diff --git a/include/asm-arm/arch-pxa/regs-ssp.h b/include/asm-arm/arch-pxa/regs-ssp.h index 0255328c3c1..3c04cde2cf1 100644 --- a/include/asm-arm/arch-pxa/regs-ssp.h +++ b/include/asm-arm/arch-pxa/regs-ssp.h @@ -20,6 +20,10 @@ #define SSTSS (0x38) /* SSP Timeslot Status */ #define SSACD (0x3C) /* SSP Audio Clock Divider */ +#if defined(CONFIG_PXA3xx) +#define SSACDD (0x40) /* SSP Audio Clock Dither Divider */ +#endif + /* Common PXA2xx bits first */ #define SSCR0_DSS (0x0000000f) /* Data Size Select (mask) */ #define SSCR0_DataSize(x) ((x) - 1) /* Data Size Select [4..16] */ @@ -29,10 +33,12 @@ #define SSCR0_National (0x2 << 4) /* National Microwire */ #define SSCR0_ECS (1 << 6) /* External clock select */ #define SSCR0_SSE (1 << 7) /* Synchronous Serial Port Enable */ + #if defined(CONFIG_PXA25x) #define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */ #define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */ -#elif defined(CONFIG_PXA27x) + +#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) #define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */ #define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */ #define SSCR0_EDSS (1 << 20) /* Extended data size select */ @@ -45,6 +51,10 @@ #define SSCR0_MOD (1 << 31) /* Mode (normal or network) */ #endif +#if defined(CONFIG_PXA3xx) +#define SSCR0_FPCKE (1 << 29) /* FIFO packing enable */ +#endif + #define SSCR1_RIE (1 << 0) /* Receive FIFO Interrupt Enable */ #define SSCR1_TIE (1 << 1) /* Transmit FIFO Interrupt Enable */ #define SSCR1_LBM (1 << 2) /* Loop-Back Mode */ @@ -109,5 +119,9 @@ #define SSACD_SCDB (1 << 3) /* SSPSYSCLK Divider Bypass */ #define SSACD_ACPS(x) ((x) << 4) /* Audio clock PLL select */ #define SSACD_ACDS(x) ((x) << 0) /* Audio clock divider select */ +#if defined(CONFIG_PXA3xx) +#define SSACD_SCDX8 (1 << 7) /* SYSCLK division ratio select */ +#endif + #endif /* __ASM_ARCH_REGS_SSP_H */ diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h index ba7e132de1b..6956fc5235f 100644 --- a/include/asm-arm/arch-pxa/system.h +++ b/include/asm-arm/arch-pxa/system.h @@ -21,19 +21,4 @@ static inline void arch_idle(void) } -static inline void arch_reset(char mode) -{ - if (cpu_is_pxa2xx()) - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; - - if (mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* Initialize the watchdog and let it fire */ - OWER = OWER_WME; - OSSR = OSSR_M3; - OSMR3 = OSCR + 368640; /* ... in 100 ms */ - } -} - +void arch_reset(char mode); diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index c5b6fde6907..a72803f0461 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -25,21 +25,18 @@ */ #define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO #define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 -#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 +#define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1) #define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) #define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) #define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) #define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 -#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17 -#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18 +#define TOSA_GPIO_BT_RESET (TOSA_SCOOP_GPIO_BASE + 6) +#define TOSA_GPIO_BT_PWR_EN (TOSA_SCOOP_GPIO_BASE + 7) #define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ - TOSA_SCOOP_AUD_PWR_ON |\ - TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) -/* GPIO out put level when init 1: Hi */ -#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) +#define TOSA_SCOOP_IO_DIR (TOSA_SCOOP_PXA_VCORE1 | \ + TOSA_SCOOP_AUD_PWR_ON) /* * SCOOP2 jacket GPIOs @@ -49,16 +46,34 @@ #define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) #define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) #define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) -#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 -#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 +#define TOSA_GPIO_TC6393XB_SUSPEND (TOSA_SCOOP_JC_GPIO_BASE + 4) +#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5) #define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 #define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) #define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_JC_IO_DIR ( \ - TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ - TOSA_SCOOP_JC_CARD_LIMIT_SEL ) +#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL) + +/* + * TC6393XB GPIOs + */ +#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12) +#define TOSA_TC6393XB_GPIO(i) (TOSA_TC6393XB_GPIO_BASE + (i)) +#define TOSA_TC6393XB_GPIO_BIT(gpio) (1 << (gpio - TOSA_TC6393XB_GPIO_BASE)) + +#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) +#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) +#define TOSA_GPIO_BL_C20MA (TOSA_TC6393XB_GPIO_BASE + 3) +#define TOSA_GPIO_CARD_VCC_ON (TOSA_TC6393XB_GPIO_BASE + 4) +#define TOSA_GPIO_CHARGE_OFF (TOSA_TC6393XB_GPIO_BASE + 6) +#define TOSA_GPIO_CHARGE_OFF_JC (TOSA_TC6393XB_GPIO_BASE + 7) +#define TOSA_GPIO_BAT0_V_ON (TOSA_TC6393XB_GPIO_BASE + 9) +#define TOSA_GPIO_BAT1_V_ON (TOSA_TC6393XB_GPIO_BASE + 10) +#define TOSA_GPIO_BU_CHRG_ON (TOSA_TC6393XB_GPIO_BASE + 11) +#define TOSA_GPIO_BAT_SW_ON (TOSA_TC6393XB_GPIO_BASE + 12) +#define TOSA_GPIO_BAT0_TH_ON (TOSA_TC6393XB_GPIO_BASE + 14) +#define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15) /* * Timing Generator @@ -84,13 +99,13 @@ #define TOSA_GPIO_JACKET_DETECT (7) #define TOSA_GPIO_nSD_DETECT (9) #define TOSA_GPIO_nSD_INT (10) -#define TOSA_GPIO_TC6393_CLK (11) +#define TOSA_GPIO_TC6393XB_CLK (11) #define TOSA_GPIO_BAT1_CRG (12) #define TOSA_GPIO_CF_CD (13) #define TOSA_GPIO_BAT0_CRG (14) -#define TOSA_GPIO_TC6393_INT (15) +#define TOSA_GPIO_TC6393XB_INT (15) #define TOSA_GPIO_BAT0_LOW (17) -#define TOSA_GPIO_TC6393_RDY (18) +#define TOSA_GPIO_TC6393XB_RDY (18) #define TOSA_GPIO_ON_RESET (19) #define TOSA_GPIO_EAR_IN (20) #define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ @@ -99,6 +114,7 @@ #define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */ #define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ #define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */ +#define TOSA_GPIO_IRDA_TX (47) #define TOSA_GPIO_TG_SPI_SCLK (81) #define TOSA_GPIO_TG_SPI_CS (82) #define TOSA_GPIO_TG_SPI_MOSI (83) @@ -137,7 +153,7 @@ #define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) #define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) #define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) -#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT) +#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT) #define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) #define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) #define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/include/asm-arm/arch-pxa/tosa_bt.h new file mode 100644 index 00000000000..efc3c3d3b75 --- /dev/null +++ b/include/asm-arm/arch-pxa/tosa_bt.h @@ -0,0 +1,22 @@ +/* + * Tosa bluetooth built-in chip control. + * + * Later it may be shared with some other platforms. + * + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef TOSA_BT_H +#define TOSA_BT_H + +struct tosa_bt_data { + int gpio_pwr; + int gpio_reset; +}; + +#endif + diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h index dadf4c20b62..f4551269aaf 100644 --- a/include/asm-arm/arch-pxa/uncompress.h +++ b/include/asm-arm/arch-pxa/uncompress.h @@ -11,11 +11,11 @@ #include <linux/serial_reg.h> #include <asm/arch/pxa-regs.h> +#include <asm/mach-types.h> -#define __REG(x) ((volatile unsigned long *)x) - -#define UART FFUART +#define __REG(x) ((volatile unsigned long *)x) +static volatile unsigned long *UART = FFUART; static inline void putc(char c) { @@ -33,8 +33,13 @@ static inline void flush(void) { } +static inline void arch_decomp_setup(void) +{ + if (machine_is_littleton()) + UART = STUART; +} + /* * nothing to do */ -#define arch_decomp_setup() #define arch_decomp_wdog() diff --git a/include/asm-arm/arch-pxa/zylonite.h b/include/asm-arm/arch-pxa/zylonite.h index de577de8d18..0d35ca04731 100644 --- a/include/asm-arm/arch-pxa/zylonite.h +++ b/include/asm-arm/arch-pxa/zylonite.h @@ -16,6 +16,8 @@ struct platform_mmc_slot { extern struct platform_mmc_slot zylonite_mmc_slot[]; extern int gpio_eth_irq; +extern int gpio_debug_led1; +extern int gpio_debug_led2; extern int wm9713_irq; diff --git a/include/asm-arm/arch-sa1100/h3600.h b/include/asm-arm/arch-sa1100/h3600.h index 1b635597157..3ca0ecf095e 100644 --- a/include/asm-arm/arch-sa1100/h3600.h +++ b/include/asm-arm/arch-sa1100/h3600.h @@ -23,6 +23,11 @@ #ifndef _INCLUDE_H3600_H_ #define _INCLUDE_H3600_H_ +typedef int __bitwise pm_request_t; + +#define PM_SUSPEND ((__force pm_request_t) 1) /* enter D1-D3 */ +#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */ + /* generalized support for H3xxx series Compaq Pocket PC's */ #define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800()) diff --git a/include/asm-arm/hardware/iop3xx-adma.h b/include/asm-arm/hardware/iop3xx-adma.h index a32b86ac62a..af64676650a 100644 --- a/include/asm-arm/hardware/iop3xx-adma.h +++ b/include/asm-arm/hardware/iop3xx-adma.h @@ -260,7 +260,7 @@ static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op) static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, int *slots_per_op) { - static const int slot_count_table[] = { 0, + static const char slot_count_table[] = { 1, 1, 1, 1, /* 01 - 04 */ 2, 2, 2, 2, /* 05 - 08 */ 4, 4, 4, 4, /* 09 - 12 */ @@ -270,7 +270,7 @@ static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt, 8, 8, 8, 8, /* 25 - 28 */ 8, 8, 8, 8, /* 29 - 32 */ }; - *slots_per_op = slot_count_table[src_cnt]; + *slots_per_op = slot_count_table[src_cnt - 1]; return *slots_per_op; } diff --git a/include/asm-arm/kgdb.h b/include/asm-arm/kgdb.h new file mode 100644 index 00000000000..67af4b84198 --- /dev/null +++ b/include/asm-arm/kgdb.h @@ -0,0 +1,104 @@ +/* + * ARM KGDB support + * + * Author: Deepak Saxena <dsaxena@mvista.com> + * + * Copyright (C) 2002 MontaVista Software Inc. + * + */ + +#ifndef __ARM_KGDB_H__ +#define __ARM_KGDB_H__ + +#include <linux/ptrace.h> + +/* + * GDB assumes that we're a user process being debugged, so + * it will send us an SWI command to write into memory as the + * debug trap. When an SWI occurs, the next instruction addr is + * placed into R14_svc before jumping to the vector trap. + * This doesn't work for kernel debugging as we are already in SVC + * we would loose the kernel's LR, which is a bad thing. This + * is bad thing. + * + * By doing this as an undefined instruction trap, we force a mode + * switch from SVC to UND mode, allowing us to save full kernel state. + * + * We also define a KGDB_COMPILED_BREAK which can be used to compile + * in breakpoints. This is important for things like sysrq-G and for + * the initial breakpoint from trap_init(). + * + * Note to ARM HW designers: Add real trap support like SH && PPC to + * make our lives much much simpler. :) + */ +#define BREAK_INSTR_SIZE 4 +#define GDB_BREAKINST 0xef9f0001 +#define KGDB_BREAKINST 0xe7ffdefe +#define KGDB_COMPILED_BREAK 0xe7ffdeff +#define CACHE_FLUSH_IS_SAFE 1 + +#ifndef __ASSEMBLY__ + +static inline void arch_kgdb_breakpoint(void) +{ + asm(".word 0xe7ffdeff"); +} + +extern void kgdb_handle_bus_error(void); +extern int kgdb_fault_expected; + +#endif /* !__ASSEMBLY__ */ + +/* + * From Kevin Hilman: + * + * gdb is expecting the following registers layout. + * + * r0-r15: 1 long word each + * f0-f7: unused, 3 long words each !! + * fps: unused, 1 long word + * cpsr: 1 long word + * + * Even though f0-f7 and fps are not used, they need to be + * present in the registers sent for correct processing in + * the host-side gdb. + * + * In particular, it is crucial that CPSR is in the right place, + * otherwise gdb will not be able to correctly interpret stepping over + * conditional branches. + */ +#define _GP_REGS 16 +#define _FP_REGS 8 +#define _EXTRA_REGS 2 +#define GDB_MAX_REGS (_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS) + +#define KGDB_MAX_NO_CPUS 1 +#define BUFMAX 400 +#define NUMREGBYTES (GDB_MAX_REGS << 2) +#define NUMCRITREGBYTES (32 << 2) + +#define _R0 0 +#define _R1 1 +#define _R2 2 +#define _R3 3 +#define _R4 4 +#define _R5 5 +#define _R6 6 +#define _R7 7 +#define _R8 8 +#define _R9 9 +#define _R10 10 +#define _FP 11 +#define _IP 12 +#define _SPT 13 +#define _LR 14 +#define _PC 15 +#define _CPSR (GDB_MAX_REGS - 1) + +/* + * So that we can denote the end of a frame for tracing, + * in the simple case: + */ +#define CFI_END_FRAME(func) __CFI_END_FRAME(_PC, _SPT, func) + +#endif /* __ASM_KGDB_H__ */ diff --git a/include/asm-arm/mach/udc_pxa2xx.h b/include/asm-arm/mach/udc_pxa2xx.h index f9f3606986c..9e5ed7c0f27 100644 --- a/include/asm-arm/mach/udc_pxa2xx.h +++ b/include/asm-arm/mach/udc_pxa2xx.h @@ -23,6 +23,7 @@ struct pxa2xx_udc_mach_info { */ bool gpio_vbus_inverted; u16 gpio_vbus; /* high == vbus present */ + bool gpio_pullup_inverted; u16 gpio_pullup; /* high == pullup activated */ }; diff --git a/include/asm-arm/page-nommu.h b/include/asm-arm/page-nommu.h index a1bcad06048..ea1cde84f50 100644 --- a/include/asm-arm/page-nommu.h +++ b/include/asm-arm/page-nommu.h @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + #ifndef _ASMARM_PAGE_NOMMU_H #define _ASMARM_PAGE_NOMMU_H @@ -42,9 +43,6 @@ typedef unsigned long pgprot_t; #define __pmd(x) (x) #define __pgprot(x) (x) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - extern unsigned long memory_start; extern unsigned long memory_end; diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h index 8e05bdb5f12..7c5fc5582e5 100644 --- a/include/asm-arm/page.h +++ b/include/asm-arm/page.h @@ -15,9 +15,6 @@ #define PAGE_SIZE (1UL << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - #ifndef __ASSEMBLY__ #ifndef CONFIG_MMU diff --git a/include/asm-arm/plat-orion/mv_xor.h b/include/asm-arm/plat-orion/mv_xor.h new file mode 100644 index 00000000000..c349e8ff5cc --- /dev/null +++ b/include/asm-arm/plat-orion/mv_xor.h @@ -0,0 +1,28 @@ +/* + * Marvell XOR platform device data definition file. + */ + +#ifndef __ASM_PLAT_ORION_MV_XOR_H +#define __ASM_PLAT_ORION_MV_XOR_H + +#include <linux/dmaengine.h> +#include <linux/mbus.h> + +#define MV_XOR_SHARED_NAME "mv_xor_shared" +#define MV_XOR_NAME "mv_xor" + +struct mbus_dram_target_info; + +struct mv_xor_platform_shared_data { + struct mbus_dram_target_info *dram; +}; + +struct mv_xor_platform_data { + struct platform_device *shared; + int hw_id; + dma_cap_mask_t cap_mask; + size_t pool_size; +}; + + +#endif diff --git a/include/asm-arm/traps.h b/include/asm-arm/traps.h index f1541afcf85..aa399aec568 100644 --- a/include/asm-arm/traps.h +++ b/include/asm-arm/traps.h @@ -24,4 +24,6 @@ static inline int in_exception_text(unsigned long ptr) ptr < (unsigned long)&__exception_text_end; } +extern void __init early_trap_init(void); + #endif diff --git a/include/asm-avr32/arch-at32ap/at32ap700x.h b/include/asm-avr32/arch-at32ap/at32ap700x.h index 31e48b0e732..d18a3053be0 100644 --- a/include/asm-avr32/arch-at32ap/at32ap700x.h +++ b/include/asm-avr32/arch-at32ap/at32ap700x.h @@ -30,4 +30,20 @@ #define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N)) #define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N)) + +/* + * DMAC peripheral hardware handshaking interfaces, used with dw_dmac + */ +#define DMAC_MCI_RX 0 +#define DMAC_MCI_TX 1 +#define DMAC_DAC_TX 2 +#define DMAC_AC97_A_RX 3 +#define DMAC_AC97_A_TX 4 +#define DMAC_AC97_B_RX 5 +#define DMAC_AC97_B_TX 6 +#define DMAC_DMAREQ_0 7 +#define DMAC_DMAREQ_1 8 +#define DMAC_DMAREQ_2 9 +#define DMAC_DMAREQ_3 10 + #endif /* __ASM_ARCH_AT32AP700X_H__ */ diff --git a/include/asm-avr32/page.h b/include/asm-avr32/page.h index cbbc5ca9728..f805d1cb11b 100644 --- a/include/asm-avr32/page.h +++ b/include/asm-avr32/page.h @@ -57,9 +57,6 @@ static inline int get_order(unsigned long size) #endif /* !__ASSEMBLY__ */ -/* Align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) - /* * The hardware maps the virtual addresses 0x80000000 -> 0x9fffffff * permanently to the physical addresses 0x00000000 -> 0x1fffffff when diff --git a/include/asm-blackfin/page.h b/include/asm-blackfin/page.h index c7db0220fbd..344f6a8c1f2 100644 --- a/include/asm-blackfin/page.h +++ b/include/asm-blackfin/page.h @@ -51,9 +51,6 @@ typedef struct page *pgtable_t; #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - extern unsigned long memory_start; extern unsigned long memory_end; diff --git a/include/asm-cris/cacheflush.h b/include/asm-cris/cacheflush.h index 01af2de27c5..cf60e3f69f8 100644 --- a/include/asm-cris/cacheflush.h +++ b/include/asm-cris/cacheflush.h @@ -26,7 +26,6 @@ #define copy_from_user_page(vma, page, vaddr, dst, src, len) \ memcpy(dst, src, len) -void global_flush_tlb(void); int change_page_attr(struct page *page, int numpages, pgprot_t prot); #endif /* _CRIS_CACHEFLUSH_H */ diff --git a/include/asm-cris/page.h b/include/asm-cris/page.h index c45bb1ef397..d19272ba6b6 100644 --- a/include/asm-cris/page.h +++ b/include/asm-cris/page.h @@ -60,9 +60,6 @@ typedef struct page *pgtable_t; #define page_to_phys(page) __pa((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - #ifndef __ASSEMBLY__ #endif /* __ASSEMBLY__ */ diff --git a/include/asm-frv/page.h b/include/asm-frv/page.h index c2c1e89e747..bd9c220094c 100644 --- a/include/asm-frv/page.h +++ b/include/asm-frv/page.h @@ -40,9 +40,6 @@ typedef struct page *pgtable_t; #define __pgprot(x) ((pgprot_t) { (x) } ) #define PTE_MASK PAGE_MASK -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) - #define devmem_is_allowed(pfn) 1 #define __pa(vaddr) virt_to_phys((void *) (unsigned long) (vaddr)) diff --git a/include/asm-h8300/keyboard.h b/include/asm-h8300/keyboard.h deleted file mode 100644 index 90efbd65539..00000000000 --- a/include/asm-h8300/keyboard.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * linux/include/asm-h8300/keyboard.h - * Created 04 Dec 2001 by Khaled Hassounah <khassounah@mediumware.net> - * This file contains the Dragonball architecture specific keyboard definitions - */ - -#ifndef _H8300_KEYBOARD_H -#define _H8300_KEYBOARD_H - - -/* dummy i.e. no real keyboard */ -#define kbd_setkeycode(x...) (-ENOSYS) -#define kbd_getkeycode(x...) (-ENOSYS) -#define kbd_translate(x...) (0) -#define kbd_unexpected_up(x...) (1) -#define kbd_leds(x...) do {;} while (0) -#define kbd_init_hw(x...) do {;} while (0) -#define kbd_enable_irq(x...) do {;} while (0) -#define kbd_disable_irq(x...) do {;} while (0) - -#endif /* _H8300_KEYBOARD_H */ - - - diff --git a/include/asm-h8300/page.h b/include/asm-h8300/page.h index d6a3eaf3b27..0b6acf0b03a 100644 --- a/include/asm-h8300/page.h +++ b/include/asm-h8300/page.h @@ -43,9 +43,6 @@ typedef struct page *pgtable_t; #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - extern unsigned long memory_start; extern unsigned long memory_end; diff --git a/include/asm-ia64/hugetlb.h b/include/asm-ia64/hugetlb.h index f28a9701f1c..da55c63728e 100644 --- a/include/asm-ia64/hugetlb.h +++ b/include/asm-ia64/hugetlb.h @@ -4,11 +4,12 @@ #include <asm/page.h> -void hugetlb_free_pgd_range(struct mmu_gather **tlb, unsigned long addr, +void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, unsigned long end, unsigned long floor, unsigned long ceiling); -int prepare_hugepage_range(unsigned long addr, unsigned long len); +int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len); static inline int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h index 36f39321b76..5f271bc712e 100644 --- a/include/asm-ia64/page.h +++ b/include/asm-ia64/page.h @@ -40,7 +40,6 @@ #define PAGE_SIZE (__IA64_UL_CONST(1) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE - 1)) -#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) #define PERCPU_PAGE_SHIFT 16 /* log2() of max. size of per-CPU area */ #define PERCPU_PAGE_SIZE (__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT) diff --git a/include/asm-m32r/page.h b/include/asm-m32r/page.h index 8a677f3fca6..c9333089fe1 100644 --- a/include/asm-m32r/page.h +++ b/include/asm-m32r/page.h @@ -41,9 +41,6 @@ typedef struct page *pgtable_t; #endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) - /* * This handles the memory map.. We could make this a config * option, but too many people screw it up, and too few need diff --git a/include/asm-m68k/dvma.h b/include/asm-m68k/dvma.h index 4fff408d015..890bbf7e775 100644 --- a/include/asm-m68k/dvma.h +++ b/include/asm-m68k/dvma.h @@ -13,7 +13,7 @@ #define DVMA_PAGE_SHIFT 13 #define DVMA_PAGE_SIZE (1UL << DVMA_PAGE_SHIFT) #define DVMA_PAGE_MASK (~(DVMA_PAGE_SIZE-1)) -#define DVMA_PAGE_ALIGN(addr) (((addr)+DVMA_PAGE_SIZE-1)&DVMA_PAGE_MASK) +#define DVMA_PAGE_ALIGN(addr) ALIGN(addr, DVMA_PAGE_SIZE) extern void dvma_init(void); extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr, diff --git a/include/asm-m68k/page.h b/include/asm-m68k/page.h index 880c2cbff8a..a34b8bad784 100644 --- a/include/asm-m68k/page.h +++ b/include/asm-m68k/page.h @@ -103,9 +103,6 @@ typedef struct page *pgtable_t; #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - #endif /* !__ASSEMBLY__ */ #include <asm/page_offset.h> diff --git a/include/asm-m68knommu/page.h b/include/asm-m68knommu/page.h index 1e82ebb7d64..3a1ede4544c 100644 --- a/include/asm-m68knommu/page.h +++ b/include/asm-m68knommu/page.h @@ -43,9 +43,6 @@ typedef struct page *pgtable_t; #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - extern unsigned long memory_start; extern unsigned long memory_end; diff --git a/include/asm-mips/mach-au1x00/au1550_spi.h b/include/asm-mips/mach-au1x00/au1550_spi.h index 40e6c489833..08e1958e941 100644 --- a/include/asm-mips/mach-au1x00/au1550_spi.h +++ b/include/asm-mips/mach-au1x00/au1550_spi.h @@ -6,7 +6,6 @@ #define _AU1550_SPI_H_ struct au1550_spi_info { - s16 bus_num; /* defines which PSC and IRQ to use */ u32 mainclk_hz; /* main input clock frequency of PSC */ u16 num_chipselect; /* number of chipselects supported */ void (*activate_cs)(struct au1550_spi_info *spi, int cs, int polarity); diff --git a/include/asm-mips/page.h b/include/asm-mips/page.h index 494f00ba954..fe7a88ea066 100644 --- a/include/asm-mips/page.h +++ b/include/asm-mips/page.h @@ -137,9 +137,6 @@ typedef struct { unsigned long pgprot; } pgprot_t; #endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) - /* * __pa()/__va() should be used only during mem init. */ diff --git a/include/asm-mips/processor.h b/include/asm-mips/processor.h index 58cbac5a64e..a1e4453469f 100644 --- a/include/asm-mips/processor.h +++ b/include/asm-mips/processor.h @@ -45,7 +45,7 @@ extern unsigned int vced_count, vcei_count; * This decides where the kernel will search for a free chunk of vm * space during mmap's. */ -#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3)) +#define TASK_UNMAPPED_BASE ((TASK_SIZE / 3) & ~(PAGE_SIZE)) #endif #ifdef CONFIG_64BIT diff --git a/include/asm-mips/socket.h b/include/asm-mips/socket.h index 63f60254d30..facc2d7a87c 100644 --- a/include/asm-mips/socket.h +++ b/include/asm-mips/socket.h @@ -102,6 +102,13 @@ enum sock_type { }; #define SOCK_MAX (SOCK_PACKET + 1) +/* Mask which covers at least up to SOCK_MASK-1. The + * * remaining bits are used as flags. */ +#define SOCK_TYPE_MASK 0xf + +/* Flags for socket, socketpair, paccept */ +#define SOCK_CLOEXEC O_CLOEXEC +#define SOCK_NONBLOCK O_NONBLOCK #define ARCH_HAS_SOCKET_TYPES 1 diff --git a/include/asm-mn10300/page.h b/include/asm-mn10300/page.h index 124971b9fb9..8288e124165 100644 --- a/include/asm-mn10300/page.h +++ b/include/asm-mn10300/page.h @@ -61,9 +61,6 @@ typedef struct page *pgtable_t; #endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) - /* * This handles the memory map.. We could make this a config * option, but too many people screw it up, and too few need diff --git a/include/asm-mn10300/pci.h b/include/asm-mn10300/pci.h index 205192c52bb..cd9cc5c89ce 100644 --- a/include/asm-mn10300/pci.h +++ b/include/asm-mn10300/pci.h @@ -74,15 +74,6 @@ struct pci_dev; /* This is always fine. */ #define pci_dac_dma_supported(pci_dev, mask) (0) -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - /* Return the index of the PCI controller for device. */ static inline int pci_controller_num(struct pci_dev *dev) { diff --git a/include/asm-mn10300/scatterlist.h b/include/asm-mn10300/scatterlist.h index e29d91dbcf2..67535901b9f 100644 --- a/include/asm-mn10300/scatterlist.h +++ b/include/asm-mn10300/scatterlist.h @@ -43,4 +43,13 @@ struct scatterlist { #define ISA_DMA_THRESHOLD (0x00ffffff) +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + #endif /* _ASM_SCATTERLIST_H */ diff --git a/include/asm-parisc/page.h b/include/asm-parisc/page.h index 27d50b85954..c3941f09a87 100644 --- a/include/asm-parisc/page.h +++ b/include/asm-parisc/page.h @@ -119,10 +119,6 @@ extern int npmem_ranges; #define PMD_ENTRY_SIZE (1UL << BITS_PER_PMD_ENTRY) #define PTE_ENTRY_SIZE (1UL << BITS_PER_PTE_ENTRY) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - - #define LINUX_GATEWAY_SPACE 0 /* This governs the relationship between virtual and physical addresses. diff --git a/include/asm-parisc/socket.h b/include/asm-parisc/socket.h index 69a7a0d30b0..fba402c95ac 100644 --- a/include/asm-parisc/socket.h +++ b/include/asm-parisc/socket.h @@ -54,4 +54,9 @@ #define SO_MARK 0x401f +/* O_NONBLOCK clashes with the bits used for socket types. Therefore we + * have to define SOCK_NONBLOCK to a different value here. + */ +#define SOCK_NONBLOCK 0x40000000 + #endif /* _ASM_SOCKET_H */ diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h index be32ff02f4a..26f0d0ab27a 100644 --- a/include/asm-powerpc/hugetlb.h +++ b/include/asm-powerpc/hugetlb.h @@ -7,7 +7,7 @@ int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, unsigned long len); -void hugetlb_free_pgd_range(struct mmu_gather **tlb, unsigned long addr, +void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, unsigned long end, unsigned long floor, unsigned long ceiling); @@ -21,11 +21,13 @@ pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, * If the arch doesn't supply something else, assume that hugepage * size aligned regions are ok without further preparation. */ -static inline int prepare_hugepage_range(unsigned long addr, unsigned long len) +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) { - if (len & ~HPAGE_MASK) + struct hstate *h = hstate_file(file); + if (len & ~huge_page_mask(h)) return -EINVAL; - if (addr & ~HPAGE_MASK) + if (addr & ~huge_page_mask(h)) return -EINVAL; return 0; } diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index 8b627823f5f..77c7fa025e6 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -617,7 +617,8 @@ static inline void iosync(void) * and can be hooked by the platform via ppc_md * * * ioremap_flags allows to specify the page flags as an argument and can - * also be hooked by the platform via ppc_md + * also be hooked by the platform via ppc_md. ioremap_prot is the exact + * same thing as ioremap_flags. * * * ioremap_nocache is identical to ioremap * @@ -639,6 +640,8 @@ extern void __iomem *ioremap(phys_addr_t address, unsigned long size); extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size, unsigned long flags); #define ioremap_nocache(addr, size) ioremap((addr), (size)) +#define ioremap_prot(addr, size, prot) ioremap_flags((addr), (size), (prot)) + extern void iounmap(volatile void __iomem *addr); extern void __iomem *__ioremap(phys_addr_t, unsigned long size, diff --git a/include/asm-powerpc/kgdb.h b/include/asm-powerpc/kgdb.h index b617dac8296..1399caf719a 100644 --- a/include/asm-powerpc/kgdb.h +++ b/include/asm-powerpc/kgdb.h @@ -1,57 +1,65 @@ /* - * kgdb.h: Defines and declarations for serial line source level - * remote debugging of the Linux kernel using gdb. + * include/asm-powerpc/kgdb.h * + * The PowerPC (32/64) specific defines / externs for KGDB. Based on + * the previous 32bit and 64bit specific files, which had the following + * copyrights: + * + * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com) + * PPC Mods (C) 2004 Tom Rini (trini@mvista.com) + * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com) * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu) * + * * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) + * Author: Tom Rini <trini@kernel.crashing.org> + * + * 2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. */ #ifdef __KERNEL__ -#ifndef _PPC_KGDB_H -#define _PPC_KGDB_H +#ifndef __POWERPC_KGDB_H__ +#define __POWERPC_KGDB_H__ #ifndef __ASSEMBLY__ -/* Things specific to the gen550 backend. */ -struct uart_port; - -extern void gen550_progress(char *, unsigned short); -extern void gen550_kgdb_map_scc(void); -extern void gen550_init(int, struct uart_port *); - -/* Things specific to the pmac backend. */ -extern void zs_kgdb_hook(int tty_num); - -/* To init the kgdb engine. (called by serial hook)*/ -extern void set_debug_traps(void); - -/* To enter the debugger explicitly. */ -extern void breakpoint(void); - -/* For taking exceptions - * these are defined in traps.c - */ -extern int (*debugger)(struct pt_regs *regs); -extern int (*debugger_bpt)(struct pt_regs *regs); -extern int (*debugger_sstep)(struct pt_regs *regs); -extern int (*debugger_iabr_match)(struct pt_regs *regs); -extern int (*debugger_dabr_match)(struct pt_regs *regs); -extern void (*debugger_fault_handler)(struct pt_regs *regs); - -/* What we bring to the party */ -int kgdb_bpt(struct pt_regs *regs); -int kgdb_sstep(struct pt_regs *regs); -void kgdb(struct pt_regs *regs); -int kgdb_iabr_match(struct pt_regs *regs); -int kgdb_dabr_match(struct pt_regs *regs); +#define BREAK_INSTR_SIZE 4 +#define BUFMAX ((NUMREGBYTES * 2) + 512) +#define OUTBUFMAX ((NUMREGBYTES * 2) + 512) +static inline void arch_kgdb_breakpoint(void) +{ + asm(".long 0x7d821008"); /* twge r2, r2 */ +} +#define CACHE_FLUSH_IS_SAFE 1 +/* The number bytes of registers we have to save depends on a few + * things. For 64bit we default to not including vector registers and + * vector state registers. */ +#ifdef CONFIG_PPC64 /* - * external low-level support routines (ie macserial.c) + * 64 bit (8 byte) registers: + * 32 gpr, 32 fpr, nip, msr, link, ctr + * 32 bit (4 byte) registers: + * ccr, xer, fpscr */ -extern void kgdb_interruptible(int); /* control interrupts from serial */ -extern void putDebugChar(char); /* write a single character */ -extern char getDebugChar(void); /* read and return a single char */ - +#define NUMREGBYTES ((68 * 8) + (3 * 4)) +#define NUMCRITREGBYTES 184 +#else /* CONFIG_PPC32 */ +/* On non-E500 family PPC32 we determine the size by picking the last + * register we need, but on E500 we skip sections so we list what we + * need to store, and add it up. */ +#ifndef CONFIG_E500 +#define MAXREG (PT_FPSCR+1) +#else +/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/ +#define MAXREG ((32*2)+6+2+1) +#endif +#define NUMREGBYTES (MAXREG * sizeof(int)) +/* CR/LR, R1, R2, R13-R31 inclusive. */ +#define NUMCRITREGBYTES (23 * sizeof(int)) +#endif /* 32/64 */ #endif /* !(__ASSEMBLY__) */ -#endif /* !(_PPC_KGDB_H) */ +#endif /* !__POWERPC_KGDB_H__ */ #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h index d1dc16afb11..19c7a940349 100644 --- a/include/asm-powerpc/mmu-hash64.h +++ b/include/asm-powerpc/mmu-hash64.h @@ -194,9 +194,9 @@ extern int mmu_ci_restrictions; #ifdef CONFIG_HUGETLB_PAGE /* - * The page size index of the huge pages for use by hugetlbfs + * The page size indexes of the huge pages for use by hugetlbfs */ -extern int mmu_huge_psize; +extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT]; #endif /* CONFIG_HUGETLB_PAGE */ @@ -281,6 +281,8 @@ extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long pstart, unsigned long mode, int psize, int ssize); extern void set_huge_psize(int psize); +extern void add_gpage(unsigned long addr, unsigned long page_size, + unsigned long number_of_pages); extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr); extern void htab_initialize(void); diff --git a/include/asm-powerpc/page.h b/include/asm-powerpc/page.h index cffdf0eb0df..e088545cb3f 100644 --- a/include/asm-powerpc/page.h +++ b/include/asm-powerpc/page.h @@ -119,9 +119,6 @@ extern phys_addr_t kernstart_addr; /* align addr on a size boundary - adjust address up if needed */ #define _ALIGN(addr,size) _ALIGN_UP(addr,size) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE) - /* * Don't compare things with KERNELBASE or PAGE_OFFSET to test for * "kernelness", use is_kernel_addr() - it should do what you want. diff --git a/include/asm-powerpc/page_64.h b/include/asm-powerpc/page_64.h index 02fd80710e9..043bfdfe4f7 100644 --- a/include/asm-powerpc/page_64.h +++ b/include/asm-powerpc/page_64.h @@ -90,6 +90,7 @@ extern unsigned int HPAGE_SHIFT; #define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) +#define HUGE_MAX_HSTATE 3 #endif /* __ASSEMBLY__ */ diff --git a/include/asm-powerpc/pgalloc-64.h b/include/asm-powerpc/pgalloc-64.h index 68980990f62..812a1d8f35c 100644 --- a/include/asm-powerpc/pgalloc-64.h +++ b/include/asm-powerpc/pgalloc-64.h @@ -22,7 +22,7 @@ extern struct kmem_cache *pgtable_cache[]; #define PUD_CACHE_NUM 1 #define PMD_CACHE_NUM 1 #define HUGEPTE_CACHE_NUM 2 -#define PTE_NONCACHE_NUM 3 /* from GFP rather than kmem_cache */ +#define PTE_NONCACHE_NUM 7 /* from GFP rather than kmem_cache */ static inline pgd_t *pgd_alloc(struct mm_struct *mm) { @@ -119,7 +119,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage) __free_page(ptepage); } -#define PGF_CACHENUM_MASK 0x3 +#define PGF_CACHENUM_MASK 0x7 typedef struct pgtable_free { unsigned long val; diff --git a/include/asm-powerpc/pgtable-4k.h b/include/asm-powerpc/pgtable-4k.h index fd2090dc1dc..c9601dfb4a1 100644 --- a/include/asm-powerpc/pgtable-4k.h +++ b/include/asm-powerpc/pgtable-4k.h @@ -51,6 +51,9 @@ #define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \ _PAGE_SECONDARY | _PAGE_GROUP_IX) +/* There is no 4K PFN hack on 4K pages */ +#define _PAGE_4K_PFN 0 + /* PAGE_MASK gives the right answer below, but only by accident */ /* It should be preserving the high 48 bits and then specifically */ /* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */ diff --git a/include/asm-powerpc/pgtable-64k.h b/include/asm-powerpc/pgtable-64k.h index c5007712473..7e54adb3559 100644 --- a/include/asm-powerpc/pgtable-64k.h +++ b/include/asm-powerpc/pgtable-64k.h @@ -138,7 +138,7 @@ static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) unsigned __split = (psize == MMU_PAGE_4K || \ psize == MMU_PAGE_64K_AP); \ shift = mmu_psize_defs[psize].shift; \ - for (index = 0; va < __end; index++, va += (1 << shift)) { \ + for (index = 0; va < __end; index++, va += (1L << shift)) { \ if (!__split || __rpte_sub_valid(rpte, index)) do { \ #define pte_iterate_hashed_end() } while(0); } } while(0) diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h index 3a96d001cb7..bdbab72f3eb 100644 --- a/include/asm-powerpc/pgtable-ppc32.h +++ b/include/asm-powerpc/pgtable-ppc32.h @@ -395,6 +395,12 @@ extern int icache_44x_need_flush; #ifndef _PAGE_EXEC #define _PAGE_EXEC 0 #endif +#ifndef _PAGE_ENDIAN +#define _PAGE_ENDIAN 0 +#endif +#ifndef _PAGE_COHERENT +#define _PAGE_COHERENT 0 +#endif #ifndef _PMD_PRESENT_MASK #define _PMD_PRESENT_MASK _PMD_PRESENT #endif @@ -405,6 +411,12 @@ extern int icache_44x_need_flush; #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + +#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \ + _PAGE_WRITETHRU | _PAGE_ENDIAN | \ + _PAGE_USER | _PAGE_ACCESSED | \ + _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \ + _PAGE_EXEC | _PAGE_HWEXEC) /* * Note: the _PAGE_COHERENT bit automatically gets set in the hardware * PTE if CONFIG_SMP is defined (hash_page does this); there is no need @@ -538,6 +550,10 @@ static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; return pte; } static inline pte_t pte_mkspecial(pte_t pte) { return pte; } +static inline unsigned long pte_pgprot(pte_t pte) +{ + return __pgprot(pte_val(pte)) & PAGE_PROT_BITS; +} static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h index ab98a9c80b2..ba8000352b9 100644 --- a/include/asm-powerpc/pgtable-ppc64.h +++ b/include/asm-powerpc/pgtable-ppc64.h @@ -117,6 +117,10 @@ #define PAGE_AGP __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE) #define HAVE_PAGE_AGP +#define PAGE_PROT_BITS __pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \ + _PAGE_NO_CACHE | _PAGE_WRITETHRU | \ + _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \ + _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC) /* PTEIDX nibble */ #define _PTEIDX_SECONDARY 0x8 #define _PTEIDX_GROUP_IX 0x7 @@ -262,6 +266,10 @@ static inline pte_t pte_mkhuge(pte_t pte) { return pte; } static inline pte_t pte_mkspecial(pte_t pte) { return pte; } +static inline unsigned long pte_pgprot(pte_t pte) +{ + return __pgprot(pte_val(pte)) & PAGE_PROT_BITS; +} /* Atomic PTE updates */ static inline unsigned long pte_update(struct mm_struct *mm, diff --git a/include/asm-s390/hugetlb.h b/include/asm-s390/hugetlb.h index 600a776f8f7..670a1d1745d 100644 --- a/include/asm-s390/hugetlb.h +++ b/include/asm-s390/hugetlb.h @@ -22,7 +22,8 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, * If the arch doesn't supply something else, assume that hugepage * size aligned regions are ok without further preparation. */ -static inline int prepare_hugepage_range(unsigned long addr, unsigned long len) +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) { if (len & ~HPAGE_MASK) return -EINVAL; diff --git a/include/asm-s390/page.h b/include/asm-s390/page.h index 12fd9c4f0f1..991ba939408 100644 --- a/include/asm-s390/page.h +++ b/include/asm-s390/page.h @@ -138,9 +138,6 @@ void arch_alloc_page(struct page *page, int order); #endif /* !__ASSEMBLY__ */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - #define __PAGE_OFFSET 0x0UL #define PAGE_OFFSET 0x0UL #define __pa(x) (unsigned long)(x) diff --git a/include/asm-sh/hugetlb.h b/include/asm-sh/hugetlb.h index 02402303d89..967068fb79a 100644 --- a/include/asm-sh/hugetlb.h +++ b/include/asm-sh/hugetlb.h @@ -14,7 +14,8 @@ static inline int is_hugepage_only_range(struct mm_struct *mm, * If the arch doesn't supply something else, assume that hugepage * size aligned regions are ok without further preparation. */ -static inline int prepare_hugepage_range(unsigned long addr, unsigned long len) +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) { if (len & ~HPAGE_MASK) return -EINVAL; @@ -26,7 +27,7 @@ static inline int prepare_hugepage_range(unsigned long addr, unsigned long len) static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) { } -static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb, +static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, unsigned long end, unsigned long floor, unsigned long ceiling) diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index 304c30b5d94..5dc01d2fcc4 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -22,9 +22,6 @@ #define PAGE_MASK (~(PAGE_SIZE-1)) #define PTE_MASK PAGE_MASK -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - #if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) #define HPAGE_SHIFT 16 #elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) diff --git a/include/asm-sh/sh7760fb.h b/include/asm-sh/sh7760fb.h new file mode 100644 index 00000000000..8767f61acec --- /dev/null +++ b/include/asm-sh/sh7760fb.h @@ -0,0 +1,197 @@ +/* + * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver. + * + * (c) 2006-2008 MSC Vertriebsges.m.b.H., + * Manuel Lauss <mano@roarinelk.homelinux.net> + * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + */ + +#ifndef _ASM_SH_SH7760FB_H +#define _ASM_SH_SH7760FB_H + +/* + * some bits of the colormap registers should be written as zero. + * create a mask for that. + */ +#define SH7760FB_PALETTE_MASK 0x00f8fcf8 + +/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */ +#define SH7760FB_DMA_MASK 0x0C000000 + +/* palette */ +#define LDPR(x) (((x) << 2)) + +/* framebuffer registers and bits */ +#define LDICKR 0x400 +#define LDMTR 0x402 +/* see sh7760fb.h for LDMTR bits */ +#define LDDFR 0x404 +#define LDDFR_PABD (1 << 8) +#define LDDFR_COLOR_MASK 0x7F +#define LDSMR 0x406 +#define LDSMR_ROT (1 << 13) +#define LDSARU 0x408 +#define LDSARL 0x40c +#define LDLAOR 0x410 +#define LDPALCR 0x412 +#define LDPALCR_PALS (1 << 4) +#define LDPALCR_PALEN (1 << 0) +#define LDHCNR 0x414 +#define LDHSYNR 0x416 +#define LDVDLNR 0x418 +#define LDVTLNR 0x41a +#define LDVSYNR 0x41c +#define LDACLNR 0x41e +#define LDINTR 0x420 +#define LDPMMR 0x424 +#define LDPSPR 0x426 +#define LDCNTR 0x428 +#define LDCNTR_DON (1 << 0) +#define LDCNTR_DON2 (1 << 4) + +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define LDLIRNR 0x440 +/* LDINTR bit */ +# define LDINTR_MINTEN (1 << 15) +# define LDINTR_FINTEN (1 << 14) +# define LDINTR_VSINTEN (1 << 13) +# define LDINTR_VEINTEN (1 << 12) +# define LDINTR_MINTS (1 << 11) +# define LDINTR_FINTS (1 << 10) +# define LDINTR_VSINTS (1 << 9) +# define LDINTR_VEINTS (1 << 8) +# define VINT_START (LDINTR_VSINTEN) +# define VINT_CHECK (LDINTR_VSINTS) +#else +/* LDINTR bit */ +# define LDINTR_VINTSEL (1 << 12) +# define LDINTR_VINTE (1 << 8) +# define LDINTR_VINTS (1 << 0) +# define VINT_START (LDINTR_VINTSEL) +# define VINT_CHECK (LDINTR_VINTS) +#endif + +/* HSYNC polarity inversion */ +#define LDMTR_FLMPOL (1 << 15) + +/* VSYNC polarity inversion */ +#define LDMTR_CL1POL (1 << 14) + +/* DISPLAY-ENABLE polarity inversion */ +#define LDMTR_DISPEN_LOWACT (1 << 13) + +/* DISPLAY DATA BUS polarity inversion */ +#define LDMTR_DPOL_LOWACT (1 << 12) + +/* AC modulation signal enable */ +#define LDMTR_MCNT (1 << 10) + +/* Disable output of HSYNC during VSYNC period */ +#define LDMTR_CL1CNT (1 << 9) + +/* Disable output of VSYNC during VSYNC period */ +#define LDMTR_CL2CNT (1 << 8) + +/* Display types supported by the LCDC */ +#define LDMTR_STN_MONO_4 0x00 +#define LDMTR_STN_MONO_8 0x01 +#define LDMTR_STN_COLOR_4 0x08 +#define LDMTR_STN_COLOR_8 0x09 +#define LDMTR_STN_COLOR_12 0x0A +#define LDMTR_STN_COLOR_16 0x0B +#define LDMTR_DSTN_MONO_8 0x11 +#define LDMTR_DSTN_MONO_16 0x13 +#define LDMTR_DSTN_COLOR_8 0x19 +#define LDMTR_DSTN_COLOR_12 0x1A +#define LDMTR_DSTN_COLOR_16 0x1B +#define LDMTR_TFT_COLOR_16 0x2B + +/* framebuffer color layout */ +#define LDDFR_1BPP_MONO 0x00 +#define LDDFR_2BPP_MONO 0x01 +#define LDDFR_4BPP_MONO 0x02 +#define LDDFR_6BPP_MONO 0x04 +#define LDDFR_4BPP 0x0A +#define LDDFR_8BPP 0x0C +#define LDDFR_16BPP_RGB555 0x1D +#define LDDFR_16BPP_RGB565 0x2D + +/* LCDC Pixclock sources */ +#define LCDC_CLKSRC_BUSCLOCK 0 +#define LCDC_CLKSRC_PERIPHERAL 1 +#define LCDC_CLKSRC_EXTERNAL 2 + +#define LDICKR_CLKSRC(x) \ + (((x) & 3) << 12) + +/* LCDC pixclock input divider. Set to 1 at a minimum! */ +#define LDICKR_CLKDIV(x) \ + ((x) & 0x1f) + +struct sh7760fb_platdata { + + /* Set this member to a valid fb_videmode for the display you + * wish to use. The following members must be initialized: + * xres, yres, hsync_len, vsync_len, sync, + * {left,right,upper,lower}_margin. + * The driver uses the above members to calculate register values + * and memory requirements. Other members are ignored but may + * be used by other framebuffer layer components. + */ + struct fb_videomode *def_mode; + + /* LDMTR includes display type and signal polarity. The + * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo + * data above; however the polarities of the following signals + * must be encoded in the ldmtr member: + * Display Enable signal (default high-active) DISPEN_LOWACT + * Display Data signals (default high-active) DPOL_LOWACT + * AC Modulation signal (default off) MCNT + * Hsync-During-Vsync suppression (default off) CL1CNT + * Vsync-during-vsync suppression (default off) CL2CNT + * NOTE: also set a display type! + * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16}) + */ + u16 ldmtr; + + /* LDDFR controls framebuffer image format (depth, organization) + * Use ONE of the LDDFR_?BPP_* macros! + */ + u16 lddfr; + + /* LDPMMR and LDPSPR control the timing of the power signals + * for the display. Please read the SH7760 Hardware Manual, + * Chapters 30.3.17, 30.3.18 and 30.4.6! + */ + u16 ldpmmr; + u16 ldpspr; + + /* LDACLNR contains the line numbers after which the AC modulation + * signal is to toggle. Set to ZERO for TFTs or displays which + * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual). + */ + u16 ldaclnr; + + /* LDICKR contains information on pixelclock source and config. + * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros. + * minimal value for CLKDIV() must be 1!. + */ + u16 ldickr; + + /* set this member to 1 if you wish to use the LCDC's hardware + * rotation function. This is limited to displays <= 320x200 + * pixels resolution! + */ + int rotate; /* set to 1 to rotate 90 CCW */ + + /* set this to 1 to suppress vsync irq use. */ + int novsync; + + /* blanking hook for platform. Set this if your platform can do + * more than the LCDC in terms of blanking (e.g. disable clock + * generator / backlight power supply / etc. + */ + void (*blank) (int); +}; + +#endif /* _ASM_SH_SH7760FB_H */ diff --git a/include/asm-sh/sh_mobile_lcdc.h b/include/asm-sh/sh_mobile_lcdc.h new file mode 100644 index 00000000000..27677727df4 --- /dev/null +++ b/include/asm-sh/sh_mobile_lcdc.h @@ -0,0 +1,66 @@ +#ifndef __ASM_SH_MOBILE_LCDC_H__ +#define __ASM_SH_MOBILE_LCDC_H__ + +#include <linux/fb.h> + +enum { RGB8, /* 24bpp, 8:8:8 */ + RGB9, /* 18bpp, 9:9 */ + RGB12A, /* 24bpp, 12:12 */ + RGB12B, /* 12bpp */ + RGB16, /* 16bpp */ + RGB18, /* 18bpp */ + RGB24, /* 24bpp */ + SYS8A, /* 24bpp, 8:8:8 */ + SYS8B, /* 18bpp, 8:8:2 */ + SYS8C, /* 18bpp, 2:8:8 */ + SYS8D, /* 16bpp, 8:8 */ + SYS9, /* 18bpp, 9:9 */ + SYS12, /* 24bpp, 12:12 */ + SYS16A, /* 16bpp */ + SYS16B, /* 18bpp, 16:2 */ + SYS16C, /* 18bpp, 2:16 */ + SYS18, /* 18bpp */ + SYS24 };/* 24bpp */ + +enum { LCDC_CHAN_DISABLED = 0, + LCDC_CHAN_MAINLCD, + LCDC_CHAN_SUBLCD }; + +enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL }; + +struct sh_mobile_lcdc_sys_bus_cfg { + unsigned long ldmt2r; + unsigned long ldmt3r; +}; + +struct sh_mobile_lcdc_sys_bus_ops { + void (*write_index)(void *handle, unsigned long data); + void (*write_data)(void *handle, unsigned long data); + unsigned long (*read_data)(void *handle); +}; + +struct sh_mobile_lcdc_board_cfg { + void *board_data; + int (*setup_sys)(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + void (*display_on)(void *board_data); + void (*display_off)(void *board_data); +}; + +struct sh_mobile_lcdc_chan_cfg { + int chan; + int bpp; + int interface_type; /* selects RGBn or SYSn I/F, see above */ + int clock_divider; + struct fb_videomode lcd_cfg; + struct sh_mobile_lcdc_board_cfg board_cfg; + struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */ +}; + +struct sh_mobile_lcdc_info { + unsigned long lddckr; + int clock_source; + struct sh_mobile_lcdc_chan_cfg ch[2]; +}; + +#endif /* __ASM_SH_MOBILE_LCDC_H__ */ diff --git a/include/asm-sparc/hugetlb.h b/include/asm-sparc/hugetlb.h index 412af58926a..177061064ee 100644 --- a/include/asm-sparc/hugetlb.h +++ b/include/asm-sparc/hugetlb.h @@ -22,7 +22,8 @@ static inline int is_hugepage_only_range(struct mm_struct *mm, * If the arch doesn't supply something else, assume that hugepage * size aligned regions are ok without further preparation. */ -static inline int prepare_hugepage_range(unsigned long addr, unsigned long len) +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) { if (len & ~HPAGE_MASK) return -EINVAL; @@ -31,7 +32,7 @@ static inline int prepare_hugepage_range(unsigned long addr, unsigned long len) return 0; } -static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb, +static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, unsigned long end, unsigned long floor, unsigned long ceiling) diff --git a/include/asm-sparc/page_32.h b/include/asm-sparc/page_32.h index 14de518cc38..cf5fb70ca1c 100644 --- a/include/asm-sparc/page_32.h +++ b/include/asm-sparc/page_32.h @@ -134,9 +134,6 @@ BTFIXUPDEF_SETHI(sparc_unmapped_base) #endif /* !(__ASSEMBLY__) */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - #define PAGE_OFFSET 0xf0000000 #ifndef __ASSEMBLY__ extern unsigned long phys_base; diff --git a/include/asm-sparc/page_64.h b/include/asm-sparc/page_64.h index a8a2bba032c..b579b910ef5 100644 --- a/include/asm-sparc/page_64.h +++ b/include/asm-sparc/page_64.h @@ -106,9 +106,6 @@ typedef struct page *pgtable_t; #endif /* !(__ASSEMBLY__) */ -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - /* We used to stick this into a hard-coded global register (%g4) * but that does not make sense anymore. */ diff --git a/include/asm-um/page.h b/include/asm-um/page.h index 916e1a61999..a6df1f13d73 100644 --- a/include/asm-um/page.h +++ b/include/asm-um/page.h @@ -92,9 +92,6 @@ typedef struct page *pgtable_t; #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - extern unsigned long uml_physmem; #define PAGE_OFFSET (uml_physmem) @@ -118,9 +115,6 @@ extern unsigned long uml_physmem; #define pfn_valid(pfn) ((pfn) < max_mapnr) #define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v))) -extern struct page *arch_validate(struct page *page, gfp_t mask, int order); -#define HAVE_ARCH_VALIDATE - #include <asm-generic/memory_model.h> #include <asm-generic/page.h> diff --git a/include/asm-um/ptrace-generic.h b/include/asm-um/ptrace-generic.h index 6aefcd32fc6..315749705ea 100644 --- a/include/asm-um/ptrace-generic.h +++ b/include/asm-um/ptrace-generic.h @@ -47,9 +47,6 @@ extern int set_fpregs(struct user_i387_struct __user *buf, extern void show_regs(struct pt_regs *regs); -extern void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs, - int error_code); - extern int arch_copy_tls(struct task_struct *new); extern void clear_flushed_tls(struct task_struct *task); diff --git a/include/asm-v850/Kbuild b/include/asm-v850/Kbuild deleted file mode 100644 index c68e1680da0..00000000000 --- a/include/asm-v850/Kbuild +++ /dev/null @@ -1 +0,0 @@ -include include/asm-generic/Kbuild.asm diff --git a/include/asm-v850/a.out.h b/include/asm-v850/a.out.h deleted file mode 100644 index e9439a0708f..00000000000 --- a/include/asm-v850/a.out.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __V850_A_OUT_H__ -#define __V850_A_OUT_H__ - -struct exec -{ - unsigned long a_info; /* Use macros N_MAGIC, etc for access */ - unsigned a_text; /* length of text, in bytes */ - unsigned a_data; /* length of data, in bytes */ - unsigned a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned a_syms; /* length of symbol table data in file, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* length of relocation info for text, in bytes */ - unsigned a_drsize; /* length of relocation info for data, in bytes */ -}; - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - - -#endif /* __V850_A_OUT_H__ */ diff --git a/include/asm-v850/anna.h b/include/asm-v850/anna.h deleted file mode 100644 index cd5eaee103b..00000000000 --- a/include/asm-v850/anna.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * include/asm-v850/anna.h -- Anna V850E2 evaluation cpu chip/board - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_ANNA_H__ -#define __V850_ANNA_H__ - -#include <asm/v850e2.h> /* Based on V850E2 core. */ - - -#define CPU_MODEL "v850e2/anna" -#define CPU_MODEL_LONG "NEC V850E2/Anna" -#define PLATFORM "anna" -#define PLATFORM_LONG "NEC/Midas lab V850E2/Anna evaluation board" - -#define CPU_CLOCK_FREQ 200000000 /* 200MHz */ -#define SYS_CLOCK_FREQ 33300000 /* 33.3MHz */ - - -/* 1MB of static RAM. This memory is mirrored 64 times. */ -#define SRAM_ADDR 0x04000000 -#define SRAM_SIZE 0x00100000 /* 1MB */ -/* 64MB of DRAM. */ -#define SDRAM_ADDR 0x08000000 -#define SDRAM_SIZE 0x04000000 /* 64MB */ - - -/* For <asm/page.h> */ -#define PAGE_OFFSET SRAM_ADDR - -/* We use on-chip RAM, for a few miscellaneous variables that must be - accessible using a load instruction relative to R0. The Anna chip has - 128K of `dLB' ram nominally located at 0xFFF00000, but it's mirrored - every 128K, so we can use the `last mirror' (except for the portion at - the top which is overridden by I/O space). In addition, the early - sample chip we're using has lots of memory errors in the dLB ram, so we - use a specially chosen location that has at least 20 bytes of contiguous - valid memory (xxxF0020 - xxxF003F). */ -#define R0_RAM_ADDR 0xFFFF8020 - - -/* Anna specific control registers. */ -#define ANNA_ILBEN_ADDR 0xFFFFF7F2 -#define ANNA_ILBEN (*(volatile u16 *)ANNA_ILBEN_ADDR) - - -/* I/O port P0-P3. */ -/* Direct I/O. Bits 0-7 are pins Pn0-Pn7. */ -#define ANNA_PORT_IO_ADDR(n) (0xFFFFF400 + (n) * 2) -#define ANNA_PORT_IO(n) (*(volatile u8 *)ANNA_PORT_IO_ADDR(n)) -/* Port mode (for direct I/O, 0 = output, 1 = input). */ -#define ANNA_PORT_PM_ADDR(n) (0xFFFFF410 + (n) * 2) -#define ANNA_PORT_PM(n) (*(volatile u8 *)ANNA_PORT_PM_ADDR(n)) - - -/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */ -#define IRQ_INTP(n) (n) /* Pnnn (pin) interrupts 0-15 */ -#define IRQ_INTP_NUM 16 -#define IRQ_INTOV(n) (0x10 + (n)) /* 0-2 */ -#define IRQ_INTOV_NUM 2 -#define IRQ_INTCCC(n) (0x12 + (n)) -#define IRQ_INTCCC_NUM 4 -#define IRQ_INTCMD(n) (0x16 + (n)) /* interval timer interrupts 0-5 */ -#define IRQ_INTCMD_NUM 6 -#define IRQ_INTDMA(n) (0x1C + (n)) /* DMA interrupts 0-3 */ -#define IRQ_INTDMA_NUM 4 -#define IRQ_INTDMXER 0x20 -#define IRQ_INTSRE(n) (0x21 + (n)*3) /* UART 0-1 reception error */ -#define IRQ_INTSRE_NUM 2 -#define IRQ_INTSR(n) (0x22 + (n)*3) /* UART 0-1 reception completion */ -#define IRQ_INTSR_NUM 2 -#define IRQ_INTST(n) (0x23 + (n)*3) /* UART 0-1 transmission completion */ -#define IRQ_INTST_NUM 2 - -#define NUM_CPU_IRQS 64 - -#ifndef __ASSEMBLY__ -/* Initialize chip interrupts. */ -extern void anna_init_irqs (void); -#endif - - -/* Anna UART details (basically the same as the V850E/MA1, but 2 channels). */ -#define V850E_UART_NUM_CHANNELS 2 -#define V850E_UART_BASE_FREQ (SYS_CLOCK_FREQ / 2) -#define V850E_UART_CHIP_NAME "V850E2/NA85E2A" - -/* This is the UART channel that's actually connected on the board. */ -#define V850E_UART_CONSOLE_CHANNEL 1 - -/* This is a function that gets called before configuring the UART. */ -#define V850E_UART_PRE_CONFIGURE anna_uart_pre_configure -#ifndef __ASSEMBLY__ -extern void anna_uart_pre_configure (unsigned chan, - unsigned cflags, unsigned baud); -#endif - -/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */ - -/* CTS for UART channel 1 is pin P37 (bit 7 of port 3). */ -#define V850E_UART_CTS(chan) ((chan) == 1 ? !(ANNA_PORT_IO(3) & 0x80) : 1) -/* RTS for UART channel 1 is pin P07 (bit 7 of port 0). */ -#define V850E_UART_SET_RTS(chan, val) \ - do { \ - if (chan == 1) { \ - unsigned old = ANNA_PORT_IO(0); \ - if (val) \ - ANNA_PORT_IO(0) = old & ~0x80; \ - else \ - ANNA_PORT_IO(0) = old | 0x80; \ - } \ - } while (0) - - -/* Timer C details. */ -#define V850E_TIMER_C_BASE_ADDR 0xFFFFF600 - -/* Timer D details (the Anna actually has 5 of these; should change later). */ -#define V850E_TIMER_D_BASE_ADDR 0xFFFFF540 -#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0) -#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2) -#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4) - -#define V850E_TIMER_D_BASE_FREQ SYS_CLOCK_FREQ -#define V850E_TIMER_D_TMCD_CS_MIN 1 /* min 2^1 divider */ - - -#endif /* __V850_ANNA_H__ */ diff --git a/include/asm-v850/as85ep1.h b/include/asm-v850/as85ep1.h deleted file mode 100644 index 5a5ca9073d0..00000000000 --- a/include/asm-v850/as85ep1.h +++ /dev/null @@ -1,152 +0,0 @@ -/* - * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_AS85EP1_H__ -#define __V850_AS85EP1_H__ - -#include <asm/v850e.h> - - -#define CPU_MODEL "as85ep1" -#define CPU_MODEL_LONG "NEC V850E/AS85EP1" -#define PLATFORM "AS85EP1" -#define PLATFORM_LONG "NEC V850E/AS85EP1 evaluation board" - -#define CPU_CLOCK_FREQ 96000000 /* 96MHz */ -#define SYS_CLOCK_FREQ CPU_CLOCK_FREQ - - -/* 1MB of static RAM. */ -#define SRAM_ADDR 0x00400000 -#define SRAM_SIZE 0x00100000 /* 1MB */ -/* About 58MB of DRAM. This can actually be at one of two positions, - determined by jump JP3; we have to use the first position because the - second is partially out of processor instruction addressing range - (though in the second position there's actually 64MB available). */ -#define SDRAM_ADDR 0x00600000 -#define SDRAM_SIZE 0x039F8000 /* approx 58MB */ - -/* For <asm/page.h> */ -#define PAGE_OFFSET SRAM_ADDR - -/* We use on-chip RAM, for a few miscellaneous variables that must be - accessible using a load instruction relative to R0. The AS85EP1 chip - 16K of internal RAM located slightly before I/O space. */ -#define R0_RAM_ADDR 0xFFFF8000 - - -/* AS85EP1 specific control registers. */ -#define AS85EP1_CSC_ADDR(n) (0xFFFFF060 + (n) * 2) -#define AS85EP1_CSC(n) (*(volatile u16 *)AS85EP1_CSC_ADDR(n)) -#define AS85EP1_BSC_ADDR 0xFFFFF066 -#define AS85EP1_BSC (*(volatile u16 *)AS85EP1_BSC_ADDR) -#define AS85EP1_BCT_ADDR(n) (0xFFFFF480 + (n) * 2) -#define AS85EP1_BCT(n) (*(volatile u16 *)AS85EP1_BCT_ADDR(n)) -#define AS85EP1_DWC_ADDR(n) (0xFFFFF484 + (n) * 2) -#define AS85EP1_DWC(n) (*(volatile u16 *)AS85EP1_DWC_ADDR(n)) -#define AS85EP1_BCC_ADDR 0xFFFFF488 -#define AS85EP1_BCC (*(volatile u16 *)AS85EP1_BCC_ADDR) -#define AS85EP1_ASC_ADDR 0xFFFFF48A -#define AS85EP1_ASC (*(volatile u16 *)AS85EP1_ASC_ADDR) -#define AS85EP1_BCP_ADDR 0xFFFFF48C -#define AS85EP1_BCP (*(volatile u16 *)AS85EP1_BCP_ADDR) -#define AS85EP1_LBS_ADDR 0xFFFFF48E -#define AS85EP1_LBS (*(volatile u16 *)AS85EP1_LBS_ADDR) -#define AS85EP1_BMC_ADDR 0xFFFFF498 -#define AS85EP1_BMC (*(volatile u16 *)AS85EP1_BMC_ADDR) -#define AS85EP1_PRC_ADDR 0xFFFFF49A -#define AS85EP1_PRC (*(volatile u16 *)AS85EP1_PRC_ADDR) -#define AS85EP1_SCR_ADDR(n) (0xFFFFF4A0 + (n) * 4) -#define AS85EP1_SCR(n) (*(volatile u16 *)AS85EP1_SCR_ADDR(n)) -#define AS85EP1_RFS_ADDR(n) (0xFFFFF4A2 + (n) * 4) -#define AS85EP1_RFS(n) (*(volatile u16 *)AS85EP1_RFS_ADDR(n)) -#define AS85EP1_IRAMM_ADDR 0xFFFFF80A -#define AS85EP1_IRAMM (*(volatile u8 *)AS85EP1_IRAMM_ADDR) - - - -/* I/O port P0-P13. */ -/* Direct I/O. Bits 0-7 are pins Pn0-Pn7. */ -#define AS85EP1_PORT_IO_ADDR(n) (0xFFFFF400 + (n) * 2) -#define AS85EP1_PORT_IO(n) (*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n)) -/* Port mode (for direct I/O, 0 = output, 1 = input). */ -#define AS85EP1_PORT_PM_ADDR(n) (0xFFFFF420 + (n) * 2) -#define AS85EP1_PORT_PM(n) (*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n)) -/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ -#define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2) -#define AS85EP1_PORT_PMC(n) (*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n)) - - -/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */ -#define IRQ_INTCCC(n) (0x0C + (n)) -#define IRQ_INTCCC_NUM 8 -#define IRQ_INTCMD(n) (0x14 + (n)) /* interval timer interrupts 0-5 */ -#define IRQ_INTCMD_NUM 6 -#define IRQ_INTSRE(n) (0x1E + (n)*3) /* UART 0-1 reception error */ -#define IRQ_INTSRE_NUM 2 -#define IRQ_INTSR(n) (0x1F + (n)*3) /* UART 0-1 reception completion */ -#define IRQ_INTSR_NUM 2 -#define IRQ_INTST(n) (0x20 + (n)*3) /* UART 0-1 transmission completion */ -#define IRQ_INTST_NUM 2 - -#define NUM_CPU_IRQS 64 - -#ifndef __ASSEMBLY__ -/* Initialize chip interrupts. */ -extern void as85ep1_init_irqs (void); -#endif - - -/* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels). */ -#define V850E_UART_NUM_CHANNELS 2 -#define V850E_UART_BASE_FREQ (SYS_CLOCK_FREQ / 4) -#define V850E_UART_CHIP_NAME "V850E/NA85E" - -/* This is a function that gets called before configuring the UART. */ -#define V850E_UART_PRE_CONFIGURE as85ep1_uart_pre_configure -#ifndef __ASSEMBLY__ -extern void as85ep1_uart_pre_configure (unsigned chan, - unsigned cflags, unsigned baud); -#endif - -/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */ - -/* CTS for UART channel 1 is pin P54 (bit 4 of port 5). */ -#define V850E_UART_CTS(chan) ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1) -/* RTS for UART channel 1 is pin P53 (bit 3 of port 5). */ -#define V850E_UART_SET_RTS(chan, val) \ - do { \ - if (chan == 1) { \ - unsigned old = AS85EP1_PORT_IO(5); \ - if (val) \ - AS85EP1_PORT_IO(5) = old & ~0x8; \ - else \ - AS85EP1_PORT_IO(5) = old | 0x8; \ - } \ - } while (0) - - -/* Timer C details. */ -#define V850E_TIMER_C_BASE_ADDR 0xFFFFF600 - -/* Timer D details (the AS85EP1 actually has 5 of these; should change later). */ -#define V850E_TIMER_D_BASE_ADDR 0xFFFFF540 -#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0) -#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2) -#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4) - -#define V850E_TIMER_D_BASE_FREQ SYS_CLOCK_FREQ -#define V850E_TIMER_D_TMCD_CS_MIN 2 /* min 2^2 divider */ - - -#endif /* __V850_AS85EP1_H__ */ diff --git a/include/asm-v850/asm.h b/include/asm-v850/asm.h deleted file mode 100644 index bf1e785a5dd..00000000000 --- a/include/asm-v850/asm.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * include/asm-v850/asm.h -- Macros for writing assembly code - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#define G_ENTRY(name) \ - .balign 4; \ - .globl name; \ - .type name,@function; \ - name -#define G_DATA(name) \ - .globl name; \ - .type name,@object; \ - name -#define END(name) \ - .size name,.-name - -#define L_ENTRY(name) \ - .balign 4; \ - .type name,@function; \ - name -#define L_DATA(name) \ - .type name,@object; \ - name diff --git a/include/asm-v850/atomic.h b/include/asm-v850/atomic.h deleted file mode 100644 index e4e57de08f7..00000000000 --- a/include/asm-v850/atomic.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * include/asm-v850/atomic.h -- Atomic operations - * - * Copyright (C) 2001,02 NEC Corporation - * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_ATOMIC_H__ -#define __V850_ATOMIC_H__ - - -#include <asm/system.h> - -#ifdef CONFIG_SMP -#error SMP not supported -#endif - -typedef struct { int counter; } atomic_t; - -#define ATOMIC_INIT(i) { (i) } - -#ifdef __KERNEL__ - -#define atomic_read(v) ((v)->counter) -#define atomic_set(v,i) (((v)->counter) = (i)) - -static inline int atomic_add_return (int i, volatile atomic_t *v) -{ - unsigned long flags; - int res; - - local_irq_save (flags); - res = v->counter + i; - v->counter = res; - local_irq_restore (flags); - - return res; -} - -static __inline__ int atomic_sub_return (int i, volatile atomic_t *v) -{ - unsigned long flags; - int res; - - local_irq_save (flags); - res = v->counter - i; - v->counter = res; - local_irq_restore (flags); - - return res; -} - -static __inline__ void atomic_clear_mask (unsigned long mask, unsigned long *addr) -{ - unsigned long flags; - - local_irq_save (flags); - *addr &= ~mask; - local_irq_restore (flags); -} - -#endif - -#define atomic_add(i, v) atomic_add_return ((i), (v)) -#define atomic_sub(i, v) atomic_sub_return ((i), (v)) - -#define atomic_dec_return(v) atomic_sub_return (1, (v)) -#define atomic_inc_return(v) atomic_add_return (1, (v)) -#define atomic_inc(v) atomic_inc_return (v) -#define atomic_dec(v) atomic_dec_return (v) - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -#define atomic_sub_and_test(i,v) (atomic_sub_return ((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return (1, (v)) == 0) -#define atomic_add_negative(i,v) (atomic_add_return ((i), (v)) < 0) - -static inline int atomic_cmpxchg(atomic_t *v, int old, int new) -{ - int ret; - unsigned long flags; - - local_irq_save(flags); - ret = v->counter; - if (likely(ret == old)) - v->counter = new; - local_irq_restore(flags); - - return ret; -} - -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) - -static inline int atomic_add_unless(atomic_t *v, int a, int u) -{ - int ret; - unsigned long flags; - - local_irq_save(flags); - ret = v->counter; - if (ret != u) - v->counter += a; - local_irq_restore(flags); - - return ret != u; -} - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -/* Atomic operations are already serializing on ARM */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#include <asm-generic/atomic.h> -#endif /* __V850_ATOMIC_H__ */ diff --git a/include/asm-v850/auxvec.h b/include/asm-v850/auxvec.h deleted file mode 100644 index f493232d022..00000000000 --- a/include/asm-v850/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __V850_AUXVEC_H__ -#define __V850_AUXVEC_H__ - -#endif /* __V850_AUXVEC_H__ */ diff --git a/include/asm-v850/bitops.h b/include/asm-v850/bitops.h deleted file mode 100644 index f82f5b4a56e..00000000000 --- a/include/asm-v850/bitops.h +++ /dev/null @@ -1,161 +0,0 @@ -/* - * include/asm-v850/bitops.h -- Bit operations - * - * Copyright (C) 2001,02,03,04,05 NEC Electronics Corporation - * Copyright (C) 2001,02,03,04,05 Miles Bader <miles@gnu.org> - * Copyright (C) 1992 Linus Torvalds. - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - */ - -#ifndef __V850_BITOPS_H__ -#define __V850_BITOPS_H__ - -#ifndef _LINUX_BITOPS_H -#error only <linux/bitops.h> can be included directly -#endif - -#include <linux/compiler.h> /* unlikely */ -#include <asm/byteorder.h> /* swab32 */ -#include <asm/system.h> /* interrupt enable/disable */ - - -#ifdef __KERNEL__ - -#include <asm-generic/bitops/ffz.h> - -/* - * The __ functions are not atomic - */ - -/* In the following constant-bit-op macros, a "g" constraint is used when - we really need an integer ("i" constraint). This is to avoid - warnings/errors from the compiler in the case where the associated - operand _isn't_ an integer, and shouldn't produce bogus assembly because - use of that form is protected by a guard statement that checks for - constants, and should otherwise be removed by the optimizer. This - _usually_ works -- however, __builtin_constant_p returns true for a - variable with a known constant value too, and unfortunately gcc will - happily put the variable in a register and use the register for the "g" - constraint'd asm operand. To avoid the latter problem, we add a - constant offset to the operand and subtract it back in the asm code; - forcing gcc to do arithmetic on the value is usually enough to get it - to use a real constant value. This is horrible, and ultimately - unreliable too, but it seems to work for now (hopefully gcc will offer - us more control in the future, so we can do a better job). */ - -#define __const_bit_op(op, nr, addr) \ - ({ __asm__ (op " (%0 - 0x123), %1" \ - :: "g" (((nr) & 0x7) + 0x123), \ - "m" (*((char *)(addr) + ((nr) >> 3))) \ - : "memory"); }) -#define __var_bit_op(op, nr, addr) \ - ({ int __nr = (nr); \ - __asm__ (op " %0, [%1]" \ - :: "r" (__nr & 0x7), \ - "r" ((char *)(addr) + (__nr >> 3)) \ - : "memory"); }) -#define __bit_op(op, nr, addr) \ - ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF) \ - ? __const_bit_op (op, nr, addr) \ - : __var_bit_op (op, nr, addr)) - -#define __set_bit(nr, addr) __bit_op ("set1", nr, addr) -#define __clear_bit(nr, addr) __bit_op ("clr1", nr, addr) -#define __change_bit(nr, addr) __bit_op ("not1", nr, addr) - -/* The bit instructions used by `non-atomic' variants are actually atomic. */ -#define set_bit __set_bit -#define clear_bit __clear_bit -#define change_bit __change_bit - - -#define __const_tns_bit_op(op, nr, addr) \ - ({ int __tns_res; \ - __asm__ __volatile__ ( \ - "tst1 (%1 - 0x123), %2; setf nz, %0; " op " (%1 - 0x123), %2" \ - : "=&r" (__tns_res) \ - : "g" (((nr) & 0x7) + 0x123), \ - "m" (*((char *)(addr) + ((nr) >> 3))) \ - : "memory"); \ - __tns_res; \ - }) -#define __var_tns_bit_op(op, nr, addr) \ - ({ int __nr = (nr); \ - int __tns_res; \ - __asm__ __volatile__ ( \ - "tst1 %1, [%2]; setf nz, %0; " op " %1, [%2]" \ - : "=&r" (__tns_res) \ - : "r" (__nr & 0x7), \ - "r" ((char *)(addr) + (__nr >> 3)) \ - : "memory"); \ - __tns_res; \ - }) -#define __tns_bit_op(op, nr, addr) \ - ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF) \ - ? __const_tns_bit_op (op, nr, addr) \ - : __var_tns_bit_op (op, nr, addr)) -#define __tns_atomic_bit_op(op, nr, addr) \ - ({ int __tns_atomic_res, __tns_atomic_flags; \ - local_irq_save (__tns_atomic_flags); \ - __tns_atomic_res = __tns_bit_op (op, nr, addr); \ - local_irq_restore (__tns_atomic_flags); \ - __tns_atomic_res; \ - }) - -#define __test_and_set_bit(nr, addr) __tns_bit_op ("set1", nr, addr) -#define test_and_set_bit(nr, addr) __tns_atomic_bit_op ("set1", nr, addr) - -#define __test_and_clear_bit(nr, addr) __tns_bit_op ("clr1", nr, addr) -#define test_and_clear_bit(nr, addr) __tns_atomic_bit_op ("clr1", nr, addr) - -#define __test_and_change_bit(nr, addr) __tns_bit_op ("not1", nr, addr) -#define test_and_change_bit(nr, addr) __tns_atomic_bit_op ("not1", nr, addr) - - -#define __const_test_bit(nr, addr) \ - ({ int __test_bit_res; \ - __asm__ __volatile__ ("tst1 (%1 - 0x123), %2; setf nz, %0" \ - : "=r" (__test_bit_res) \ - : "g" (((nr) & 0x7) + 0x123), \ - "m" (*((const char *)(addr) + ((nr) >> 3)))); \ - __test_bit_res; \ - }) -static inline int __test_bit (int nr, const void *addr) -{ - int res; - __asm__ __volatile__ ("tst1 %1, [%2]; setf nz, %0" - : "=r" (res) - : "r" (nr & 0x7), "r" (addr + (nr >> 3))); - return res; -} -#define test_bit(nr,addr) \ - ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF) \ - ? __const_test_bit ((nr), (addr)) \ - : __test_bit ((nr), (addr))) - - -/* clear_bit doesn't provide any barrier for the compiler. */ -#define smp_mb__before_clear_bit() barrier () -#define smp_mb__after_clear_bit() barrier () - -#include <asm-generic/bitops/ffs.h> -#include <asm-generic/bitops/fls.h> -#include <asm-generic/bitops/fls64.h> -#include <asm-generic/bitops/__ffs.h> -#include <asm-generic/bitops/find.h> -#include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/hweight.h> -#include <asm-generic/bitops/lock.h> - -#include <asm-generic/bitops/ext2-non-atomic.h> -#define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a) -#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a) - -#include <asm-generic/bitops/minix.h> - -#endif /* __KERNEL__ */ - -#endif /* __V850_BITOPS_H__ */ diff --git a/include/asm-v850/bug.h b/include/asm-v850/bug.h deleted file mode 100644 index b0ed2d35f3e..00000000000 --- a/include/asm-v850/bug.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-v850/bug.h -- Bug reporting - * - * Copyright (C) 2003 NEC Electronics Corporation - * Copyright (C) 2003 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_BUG_H__ -#define __V850_BUG_H__ - -#ifdef CONFIG_BUG -extern void __bug (void) __attribute__ ((noreturn)); -#define BUG() __bug() -#define HAVE_ARCH_BUG -#endif - -#include <asm-generic/bug.h> - -#endif /* __V850_BUG_H__ */ diff --git a/include/asm-v850/bugs.h b/include/asm-v850/bugs.h deleted file mode 100644 index 71110a65c1d..00000000000 --- a/include/asm-v850/bugs.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * include/asm-v850e/bugs.h - * - * Copyright (C) 1994 Linus Torvalds - */ - -/* - * This is included by init/main.c to check for architecture-dependent bugs. - * - * Needs: - * void check_bugs(void); - */ - -static void check_bugs(void) -{ -} diff --git a/include/asm-v850/byteorder.h b/include/asm-v850/byteorder.h deleted file mode 100644 index a6f07530050..00000000000 --- a/include/asm-v850/byteorder.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-v850/byteorder.h -- Endian id and conversion ops - * - * Copyright (C) 2001 NEC Corporation - * Copyright (C) 2001 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_BYTEORDER_H__ -#define __V850_BYTEORDER_H__ - -#include <asm/types.h> -#include <linux/compiler.h> - -#ifdef __GNUC__ - -static __inline__ __attribute_const__ __u32 ___arch__swab32 (__u32 word) -{ - __u32 res; - __asm__ ("bsw %1, %0" : "=r" (res) : "r" (word)); - return res; -} - -static __inline__ __attribute_const__ __u16 ___arch__swab16 (__u16 half_word) -{ - __u16 res; - __asm__ ("bsh %1, %0" : "=r" (res) : "r" (half_word)); - return res; -} - -#define __arch__swab32(x) ___arch__swab32(x) -#define __arch__swab16(x) ___arch__swab16(x) - -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __BYTEORDER_HAS_U64__ -# define __SWAB_64_THRU_32__ -#endif - -#endif /* __GNUC__ */ - -#include <linux/byteorder/little_endian.h> - -#endif /* __V850_BYTEORDER_H__ */ diff --git a/include/asm-v850/cache.h b/include/asm-v850/cache.h deleted file mode 100644 index 8832c7ea324..00000000000 --- a/include/asm-v850/cache.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-v850/cache.h -- Cache operations - * - * Copyright (C) 2001,05 NEC Corporation - * Copyright (C) 2001,05 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_CACHE_H__ -#define __V850_CACHE_H__ - -/* All cache operations are machine-dependent. */ -#include <asm/machdep.h> - -#ifndef L1_CACHE_BYTES -/* This processor has no cache, so just choose an arbitrary value. */ -#define L1_CACHE_BYTES 16 -#define L1_CACHE_SHIFT 4 -#endif - -#endif /* __V850_CACHE_H__ */ diff --git a/include/asm-v850/cacheflush.h b/include/asm-v850/cacheflush.h deleted file mode 100644 index 9ece05a202e..00000000000 --- a/include/asm-v850/cacheflush.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * include/asm-v850/cacheflush.h - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_CACHEFLUSH_H__ -#define __V850_CACHEFLUSH_H__ - -/* Somebody depends on this; sigh... */ -#include <linux/mm.h> - -#include <asm/machdep.h> - - -/* The following are all used by the kernel in ways that only affect - systems with MMUs, so we don't need them. */ -#define flush_cache_all() ((void)0) -#define flush_cache_mm(mm) ((void)0) -#define flush_cache_dup_mm(mm) ((void)0) -#define flush_cache_range(vma, start, end) ((void)0) -#define flush_cache_page(vma, vmaddr, pfn) ((void)0) -#define flush_dcache_page(page) ((void)0) -#define flush_dcache_mmap_lock(mapping) ((void)0) -#define flush_dcache_mmap_unlock(mapping) ((void)0) -#define flush_cache_vmap(start, end) ((void)0) -#define flush_cache_vunmap(start, end) ((void)0) - -#ifdef CONFIG_NO_CACHE - -/* Some systems have no cache at all, in which case we don't need these - either. */ -#define flush_icache() ((void)0) -#define flush_icache_range(start, end) ((void)0) -#define flush_icache_page(vma,pg) ((void)0) -#define flush_icache_user_range(vma,pg,adr,len) ((void)0) -#define flush_cache_sigtramp(vaddr) ((void)0) - -#else /* !CONFIG_NO_CACHE */ - -struct page; -struct mm_struct; -struct vm_area_struct; - -/* Otherwise, somebody had better define them. */ -extern void flush_icache (void); -extern void flush_icache_range (unsigned long start, unsigned long end); -extern void flush_icache_page (struct vm_area_struct *vma, struct page *page); -extern void flush_icache_user_range (struct vm_area_struct *vma, - struct page *page, - unsigned long adr, int len); -extern void flush_cache_sigtramp (unsigned long addr); - -#endif /* CONFIG_NO_CACHE */ - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { memcpy(dst, src, len); \ - flush_icache_user_range(vma, page, vaddr, len); \ -} while (0) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy(dst, src, len) - -#endif /* __V850_CACHEFLUSH_H__ */ diff --git a/include/asm-v850/checksum.h b/include/asm-v850/checksum.h deleted file mode 100644 index d1dddd93826..00000000000 --- a/include/asm-v850/checksum.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * include/asm-v850/checksum.h -- Checksum ops - * - * Copyright (C) 2001,2005 NEC Corporation - * Copyright (C) 2001,2005 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_CHECKSUM_H__ -#define __V850_CHECKSUM_H__ - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -extern __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -extern __wsum csum_partial_copy_nocheck(const void *src, - void *dst, int len, __wsum sum); - - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -extern __wsum csum_partial_copy_from_user (const void *src, - void *dst, - int len, __wsum sum, - int *csum_err); - -__sum16 ip_fast_csum(const void *iph, unsigned int ihl); - -/* - * Fold a partial checksum - */ -static inline __sum16 csum_fold (__wsum sum) -{ - unsigned int result; - /* - %0 %1 - hsw %1, %0 H L L H - add %1, %0 H L H+L+C H+L - */ - asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum)); - return (__force __sum16)(~result >> 16); -} - - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __wsum -csum_tcpudp_nofold (__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, __wsum sum) -{ - int __carry; - __asm__ ("add %2, %0;" - "setf c, %1;" - "add %1, %0;" - "add %3, %0;" - "setf c, %1;" - "add %1, %0;" - "add %4, %0;" - "setf c, %1;" - "add %1, %0" - : "=&r" (sum), "=&r" (__carry) - : "r" (daddr), "r" (saddr), - "r" ((len + proto) << 8), - "0" (sum)); - return sum; -} - -static inline __sum16 -csum_tcpudp_magic (__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, __wsum sum) -{ - return csum_fold (csum_tcpudp_nofold (saddr, daddr, len, proto, sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -extern __sum16 ip_compute_csum(const void *buff, int len); - - -#endif /* __V850_CHECKSUM_H__ */ diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h deleted file mode 100644 index c389691d6f8..00000000000 --- a/include/asm-v850/clinkage.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-v850/clinkage.h -- Macros to reflect C symbol-naming conventions - * - * Copyright (C) 2001,02 NEC Corporatione - * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_CLINKAGE_H__ -#define __V850_CLINKAGE_H__ - -#include <asm/macrology.h> -#include <asm/asm.h> - -#define C_SYMBOL_NAME(name) macrology_paste(_, name) -#define C_SYMBOL_STRING(name) macrology_stringify(C_SYMBOL_NAME(name)) -#define C_ENTRY(name) G_ENTRY(C_SYMBOL_NAME(name)) -#define C_DATA(name) G_DATA(C_SYMBOL_NAME(name)) -#define C_END(name) END(C_SYMBOL_NAME(name)) - -#endif /* __V850_CLINKAGE_H__ */ diff --git a/include/asm-v850/cputime.h b/include/asm-v850/cputime.h deleted file mode 100644 index 7c799c33b8a..00000000000 --- a/include/asm-v850/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __V850_CPUTIME_H -#define __V850_CPUTIME_H - -#include <asm-generic/cputime.h> - -#endif /* __V850_CPUTIME_H */ diff --git a/include/asm-v850/current.h b/include/asm-v850/current.h deleted file mode 100644 index 30aae567377..00000000000 --- a/include/asm-v850/current.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-v850/current.h -- Current task - * - * Copyright (C) 2001,02 NEC Corporation - * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_CURRENT_H__ -#define __V850_CURRENT_H__ - -#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe. */ -#include <linux/thread_info.h> -#endif - -#include <asm/macrology.h> - - -/* Register used to hold the current task pointer while in the kernel. - Any `call clobbered' register without a special meaning should be OK, - but check asm/v850/kernel/entry.S to be sure. */ -#define CURRENT_TASK_REGNUM 16 -#define CURRENT_TASK macrology_paste (r, CURRENT_TASK_REGNUM) - - -#ifdef __ASSEMBLY__ - -/* Put a pointer to the current task structure into REG. */ -#define GET_CURRENT_TASK(reg) \ - GET_CURRENT_THREAD(reg); \ - ld.w TI_TASK[reg], reg - -#else /* !__ASSEMBLY__ */ - -/* A pointer to the current task. */ -register struct task_struct *current \ - __asm__ (macrology_stringify (CURRENT_TASK)); - -#endif /* __ASSEMBLY__ */ - - -#endif /* _V850_CURRENT_H */ diff --git a/include/asm-v850/delay.h b/include/asm-v850/delay.h deleted file mode 100644 index 6d028e6b235..00000000000 --- a/include/asm-v850/delay.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-v850/delay.h -- Delay routines, using a pre-computed - * "loops_per_second" value - * - * Copyright (C) 2001,03 NEC Corporation - * Copyright (C) 2001,03 Miles Bader <miles@gnu.org> - * Copyright (C) 1994 Hamish Macdonald - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - */ - -#ifndef __V850_DELAY_H__ -#define __V850_DELAY_H__ - -#include <asm/param.h> - -static inline void __delay(unsigned long loops) -{ - if (loops) - __asm__ __volatile__ ("1: add -1, %0; bnz 1b" - : "=r" (loops) : "0" (loops)); -} - -/* - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ - -extern unsigned long loops_per_jiffy; - -static inline void udelay(unsigned long usecs) -{ - register unsigned long full_loops, part_loops; - - full_loops = ((usecs * HZ) / 1000000) * loops_per_jiffy; - usecs %= (1000000 / HZ); - part_loops = (usecs * HZ * loops_per_jiffy) / 1000000; - - __delay(full_loops + part_loops); -} - -#endif /* __V850_DELAY_H__ */ diff --git a/include/asm-v850/device.h b/include/asm-v850/device.h deleted file mode 100644 index d8f9872b0e2..00000000000 --- a/include/asm-v850/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include <asm-generic/device.h> - diff --git a/include/asm-v850/div64.h b/include/asm-v850/div64.h deleted file mode 100644 index 6cd978cefb2..00000000000 --- a/include/asm-v850/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/div64.h> diff --git a/include/asm-v850/dma-mapping.h b/include/asm-v850/dma-mapping.h deleted file mode 100644 index 1cc42c603a1..00000000000 --- a/include/asm-v850/dma-mapping.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __V850_DMA_MAPPING_H__ -#define __V850_DMA_MAPPING_H__ - - -#ifdef CONFIG_PCI -#include <asm-generic/dma-mapping.h> -#else -#include <asm-generic/dma-mapping-broken.h> -#endif - -#endif /* __V850_DMA_MAPPING_H__ */ diff --git a/include/asm-v850/dma.h b/include/asm-v850/dma.h deleted file mode 100644 index 2369849e2d0..00000000000 --- a/include/asm-v850/dma.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef __V850_DMA_H__ -#define __V850_DMA_H__ - -/* What should this be? */ -#define MAX_DMA_ADDRESS 0xFFFFFFFF - -/* reserve a DMA channel */ -extern int request_dma (unsigned int dmanr, const char * device_id); -/* release it again */ -extern void free_dma (unsigned int dmanr); - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* __V850_DMA_H__ */ diff --git a/include/asm-v850/elf.h b/include/asm-v850/elf.h deleted file mode 100644 index 28f5b176ff1..00000000000 --- a/include/asm-v850/elf.h +++ /dev/null @@ -1,99 +0,0 @@ -#ifndef __V850_ELF_H__ -#define __V850_ELF_H__ - -/* - * ELF register definitions.. - */ - -#include <asm/ptrace.h> -#include <asm/user.h> -#include <asm/byteorder.h> - -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_fpu_struct elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) \ - ((x)->e_machine == EM_V850 || (x)->e_machine == EM_CYGNUS_V850) - - -/* v850 relocation types. */ -#define R_V850_NONE 0 -#define R_V850_9_PCREL 1 -#define R_V850_22_PCREL 2 -#define R_V850_HI16_S 3 -#define R_V850_HI16 4 -#define R_V850_LO16 5 -#define R_V850_32 6 -#define R_V850_16 7 -#define R_V850_8 8 -#define R_V850_SDA_16_16_OFFSET 9 /* For ld.b, st.b, set1, clr1, - not1, tst1, movea, movhi */ -#define R_V850_SDA_15_16_OFFSET 10 /* For ld.w, ld.h, ld.hu, st.w, st.h */ -#define R_V850_ZDA_16_16_OFFSET 11 /* For ld.b, st.b, set1, clr1, - not1, tst1, movea, movhi */ -#define R_V850_ZDA_15_16_OFFSET 12 /* For ld.w, ld.h, ld.hu, st.w, st.h */ -#define R_V850_TDA_6_8_OFFSET 13 /* For sst.w, sld.w */ -#define R_V850_TDA_7_8_OFFSET 14 /* For sst.h, sld.h */ -#define R_V850_TDA_7_7_OFFSET 15 /* For sst.b, sld.b */ -#define R_V850_TDA_16_16_OFFSET 16 /* For set1, clr1, not1, tst1, - movea, movhi */ -#define R_V850_NUM 17 - - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#ifdef __LITTLE_ENDIAN__ -#define ELF_DATA ELFDATA2LSB -#else -#define ELF_DATA ELFDATA2MSB -#endif -#define ELF_ARCH EM_V850 - -#define USE_ELF_CORE_DUMP -#define ELF_EXEC_PAGESIZE 4096 - - -#define ELF_CORE_COPY_REGS(_dest,_regs) \ - memcpy((char *) &_dest, (char *) _regs, \ - sizeof(struct pt_regs)); - -/* This yields a mask that user programs can use to figure out what - instruction set this CPU supports. This could be done in user space, - but it's not easy, and we've already done it here. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. - - For the moment, we have only optimizations for the Intel generations, - but that could change... */ - -#define ELF_PLATFORM (NULL) - -#define ELF_PLAT_INIT(_r, load_addr) \ - do { \ - _r->gpr[0] = _r->gpr[1] = _r->gpr[2] = _r->gpr[3] = \ - _r->gpr[4] = _r->gpr[5] = _r->gpr[6] = _r->gpr[7] = \ - _r->gpr[8] = _r->gpr[9] = _r->gpr[10] = _r->gpr[11] = \ - _r->gpr[12] = _r->gpr[13] = _r->gpr[14] = _r->gpr[15] = \ - _r->gpr[16] = _r->gpr[17] = _r->gpr[18] = _r->gpr[19] = \ - _r->gpr[20] = _r->gpr[21] = _r->gpr[22] = _r->gpr[23] = \ - _r->gpr[24] = _r->gpr[25] = _r->gpr[26] = _r->gpr[27] = \ - _r->gpr[28] = _r->gpr[29] = _r->gpr[30] = _r->gpr[31] = \ - 0; \ - } while (0) - -#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) - -#endif /* __V850_ELF_H__ */ diff --git a/include/asm-v850/emergency-restart.h b/include/asm-v850/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/include/asm-v850/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-v850/entry.h b/include/asm-v850/entry.h deleted file mode 100644 index d9df8ac4858..00000000000 --- a/include/asm-v850/entry.h +++ /dev/null @@ -1,113 +0,0 @@ -/* - * include/asm-v850/entry.h -- Definitions used by low-level trap handlers - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_ENTRY_H__ -#define __V850_ENTRY_H__ - - -#include <asm/ptrace.h> -#include <asm/machdep.h> - - -/* These are special variables using by the kernel trap/interrupt code - to save registers in, at a time when there are no spare registers we - can use to do so, and we can't depend on the value of the stack - pointer. This means that they must be within a signed 16-bit - displacement of 0x00000000. */ - -#define KERNEL_VAR_SPACE_ADDR R0_RAM_ADDR - -#ifdef __ASSEMBLY__ -#define KERNEL_VAR(addr) addr[r0] -#else -#define KERNEL_VAR(addr) (*(volatile unsigned long *)(addr)) -#endif - -/* Kernel stack pointer, 4 bytes. */ -#define KSP_ADDR (KERNEL_VAR_SPACE_ADDR + 0) -#define KSP KERNEL_VAR (KSP_ADDR) -/* 1 if in kernel-mode, 0 if in user mode, 1 byte. */ -#define KM_ADDR (KERNEL_VAR_SPACE_ADDR + 4) -#define KM KERNEL_VAR (KM_ADDR) -/* Temporary storage for interrupt handlers, 4 bytes. */ -#define INT_SCRATCH_ADDR (KERNEL_VAR_SPACE_ADDR + 8) -#define INT_SCRATCH KERNEL_VAR (INT_SCRATCH_ADDR) -/* Where the stack-pointer is saved when jumping to various sorts of - interrupt handlers. ENTRY_SP is used by everything except NMIs, - which have their own location. Higher-priority NMIs can clobber the - value written by a lower priority NMI, since they can't be disabled, - but that's OK, because only NMI0 (the lowest-priority one) is allowed - to return. */ -#define ENTRY_SP_ADDR (KERNEL_VAR_SPACE_ADDR + 12) -#define ENTRY_SP KERNEL_VAR (ENTRY_SP_ADDR) -#define NMI_ENTRY_SP_ADDR (KERNEL_VAR_SPACE_ADDR + 16) -#define NMI_ENTRY_SP KERNEL_VAR (NMI_ENTRY_SP_ADDR) - -#ifdef CONFIG_RESET_GUARD -/* Used to detect unexpected resets (since the v850 has no MMU, any call - through a null pointer will jump to the reset vector). We detect - such resets by checking for a magic value, RESET_GUARD_ACTIVE, in - this location. Properly resetting the machine stores zero there, so - it shouldn't trigger the guard; the power-on value is uncertain, but - it's unlikely to be RESET_GUARD_ACTIVE. */ -#define RESET_GUARD_ADDR (KERNEL_VAR_SPACE_ADDR + 28) -#define RESET_GUARD KERNEL_VAR (RESET_GUARD_ADDR) -#define RESET_GUARD_ACTIVE 0xFAB4BEEF -#endif /* CONFIG_RESET_GUARD */ - -#ifdef CONFIG_V850E_HIGHRES_TIMER -#define HIGHRES_TIMER_SLOW_TICKS_ADDR (KERNEL_VAR_SPACE_ADDR + 32) -#define HIGHRES_TIMER_SLOW_TICKS KERNEL_VAR (HIGHRES_TIMER_SLOW_TICKS_ADDR) -#endif /* CONFIG_V850E_HIGHRES_TIMER */ - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_RESET_GUARD -/* Turn off reset guard, so that resetting the machine works normally. - This should be called in the various machine_halt, etc., functions. */ -static inline void disable_reset_guard (void) -{ - RESET_GUARD = 0; -} -#endif /* CONFIG_RESET_GUARD */ - -#endif /* !__ASSEMBLY__ */ - - -/* A `state save frame' is a struct pt_regs preceded by some extra space - suitable for a function call stack frame. */ - -/* Amount of room on the stack reserved for arguments and to satisfy the - C calling conventions, in addition to the space used by the struct - pt_regs that actually holds saved values. */ -#define STATE_SAVE_ARG_SPACE (6*4) /* Up to six arguments. */ - - -#ifdef __ASSEMBLY__ - -/* The size of a state save frame. */ -#define STATE_SAVE_SIZE (PT_SIZE + STATE_SAVE_ARG_SPACE) - -#else /* !__ASSEMBLY__ */ - -/* The size of a state save frame. */ -#define STATE_SAVE_SIZE (sizeof (struct pt_regs) + STATE_SAVE_ARG_SPACE) - -#endif /* __ASSEMBLY__ */ - - -/* Offset of the struct pt_regs in a state save frame. */ -#define STATE_SAVE_PT_OFFSET STATE_SAVE_ARG_SPACE - - -#endif /* __V850_ENTRY_H__ */ diff --git a/include/asm-v850/errno.h b/include/asm-v850/errno.h deleted file mode 100644 index 31c91df0120..00000000000 --- a/include/asm-v850/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __V850_ERRNO_H__ -#define __V850_ERRNO_H__ - -#include <asm-generic/errno.h> - -#endif /* __V850_ERRNO_H__ */ diff --git a/include/asm-v850/fb.h b/include/asm-v850/fb.h deleted file mode 100644 index c7df3803099..00000000000 --- a/include/asm-v850/fb.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASM_FB_H_ -#define _ASM_FB_H_ -#include <linux/fb.h> - -#define fb_pgprotect(...) do {} while (0) - -static inline int fb_is_primary_device(struct fb_info *info) -{ - return 0; -} - -#endif /* _ASM_FB_H_ */ diff --git a/include/asm-v850/fcntl.h b/include/asm-v850/fcntl.h deleted file mode 100644 index 3af4d56776d..00000000000 --- a/include/asm-v850/fcntl.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __V850_FCNTL_H__ -#define __V850_FCNTL_H__ - -#define O_DIRECTORY 040000 /* must be a directory */ -#define O_NOFOLLOW 0100000 /* don't follow links */ -#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ -#define O_LARGEFILE 0400000 - -#include <asm-generic/fcntl.h> - -#endif /* __V850_FCNTL_H__ */ diff --git a/include/asm-v850/flat.h b/include/asm-v850/flat.h deleted file mode 100644 index 17f0ea56661..00000000000 --- a/include/asm-v850/flat.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * include/asm-v850/flat.h -- uClinux flat-format executables - * - * Copyright (C) 2002,03 NEC Electronics Corporation - * Copyright (C) 2002,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_FLAT_H__ -#define __V850_FLAT_H__ - -/* The amount by which a relocation can exceed the program image limits - without being regarded as an error. On the v850, the relocations of - some base-pointers can be offset by 0x8000 (to allow better usage of the - space offered by 16-bit signed offsets -- in most cases the offsets used - with such a base-pointer will be negative). */ - -#define flat_reloc_valid(reloc, size) ((reloc) <= (size + 0x8000)) - -#define flat_stack_align(sp) /* nothing needed */ -#define flat_argvp_envp_on_stack() 0 -#define flat_old_ram_flag(flags) (flags) -#define flat_set_persistent(relval, p) 0 - -/* We store the type of relocation in the top 4 bits of the `relval.' */ - -/* Convert a relocation entry into an address. */ -static inline unsigned long -flat_get_relocate_addr (unsigned long relval) -{ - return relval & 0x0fffffff; /* Mask out top 4-bits */ -} - -#define flat_v850_get_reloc_type(relval) ((relval) >> 28) - -#define FLAT_V850_R_32 0 /* Normal 32-bit reloc */ -#define FLAT_V850_R_HI16S_LO15 1 /* High 16-bits + signed 15-bit low field */ -#define FLAT_V850_R_HI16S_LO16 2 /* High 16-bits + signed 16-bit low field */ - -/* Extract the address to be relocated from the symbol reference at RP; - RELVAL is the raw relocation-table entry from which RP is derived. - For the v850, RP should always be half-word aligned. */ -static inline unsigned long flat_get_addr_from_rp (unsigned long *rp, - unsigned long relval, - unsigned long flags, - unsigned long *persistent) -{ - short *srp = (short *)rp; - - switch (flat_v850_get_reloc_type (relval)) - { - case FLAT_V850_R_32: - /* Simple 32-bit address. */ - return srp[0] | (srp[1] << 16); - - case FLAT_V850_R_HI16S_LO16: - /* The high and low halves of the address are in the 16 - bits at RP, and the 2nd word of the 32-bit instruction - following that, respectively. The low half is _signed_ - so we have to sign-extend it and add it to the upper - half instead of simply or-ing them together. - - Unlike most relocated address, this one is stored in - native (little-endian) byte-order to avoid problems with - trashing the low-order bit, so we have to convert to - network-byte-order before returning, as that's what the - caller expects. */ - return htonl ((srp[0] << 16) + srp[2]); - - case FLAT_V850_R_HI16S_LO15: - /* The high and low halves of the address are in the 16 - bits at RP, and the upper 15 bits of the 2nd word of the - 32-bit instruction following that, respectively. The - low half is _signed_ so we have to sign-extend it and - add it to the upper half instead of simply or-ing them - together. The lowest bit is always zero. - - Unlike most relocated address, this one is stored in - native (little-endian) byte-order to avoid problems with - trashing the low-order bit, so we have to convert to - network-byte-order before returning, as that's what the - caller expects. */ - return htonl ((srp[0] << 16) + (srp[2] & ~0x1)); - - default: - return ~0; /* bogus value */ - } -} - -/* Insert the address ADDR into the symbol reference at RP; - RELVAL is the raw relocation-table entry from which RP is derived. - For the v850, RP should always be half-word aligned. */ -static inline void flat_put_addr_at_rp (unsigned long *rp, unsigned long addr, - unsigned long relval) -{ - short *srp = (short *)rp; - - switch (flat_v850_get_reloc_type (relval)) { - case FLAT_V850_R_32: - /* Simple 32-bit address. */ - srp[0] = addr & 0xFFFF; - srp[1] = (addr >> 16); - break; - - case FLAT_V850_R_HI16S_LO16: - /* The high and low halves of the address are in the 16 - bits at RP, and the 2nd word of the 32-bit instruction - following that, respectively. The low half is _signed_ - so we must carry its sign bit to the upper half before - writing the upper half. */ - srp[0] = (addr >> 16) + ((addr >> 15) & 0x1); - srp[2] = addr & 0xFFFF; - break; - - case FLAT_V850_R_HI16S_LO15: - /* The high and low halves of the address are in the 16 - bits at RP, and the upper 15 bits of the 2nd word of the - 32-bit instruction following that, respectively. The - low half is _signed_ so we must carry its sign bit to - the upper half before writing the upper half. The - lowest bit we preserve from the existing instruction. */ - srp[0] = (addr >> 16) + ((addr >> 15) & 0x1); - srp[2] = (addr & 0xFFFE) | (srp[2] & 0x1); - break; - } -} - -#endif /* __V850_FLAT_H__ */ diff --git a/include/asm-v850/fpga85e2c.h b/include/asm-v850/fpga85e2c.h deleted file mode 100644 index 23aae666c71..00000000000 --- a/include/asm-v850/fpga85e2c.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * include/asm-v850/fpga85e2c.h -- Machine-dependent defs for - * FPGA implementation of V850E2/NA85E2C - * - * Copyright (C) 2002,03 NEC Electronics Corporation - * Copyright (C) 2002,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_FPGA85E2C_H__ -#define __V850_FPGA85E2C_H__ - -#include <asm/v850e2.h> -#include <asm/clinkage.h> - - -#define CPU_MODEL "v850e2/fpga85e2c" -#define CPU_MODEL_LONG "NEC V850E2/NA85E2C" -#define PLATFORM "fpga85e2c" -#define PLATFORM_LONG "NA85E2C FPGA implementation" - - -/* `external ram'. */ -#define ERAM_ADDR 0 -#define ERAM_SIZE 0x00100000 /* 1MB */ - - -/* FPGA specific control registers. */ - -/* Writing a non-zero value to FLGREG(0) will signal the controlling CPU - to stop execution. */ -#define FLGREG_ADDR(n) (0xFFE80100 + 2*(n)) -#define FLGREG(n) (*(volatile unsigned char *)FLGREG_ADDR (n)) -#define FLGREG_NUM 2 - -#define CSDEV_ADDR(n) (0xFFE80110 + 2*(n)) -#define CSDEV(n) (*(volatile unsigned char *)CSDEV_ADDR (n)) - - -/* Timer interrupts 0-3, interrupt at intervals from CLK/4096 to CLK/16384. */ -#define IRQ_RPU(n) (60 + (n)) -#define IRQ_RPU_NUM 4 - -/* For <asm/irq.h> */ -#define NUM_CPU_IRQS 64 - - -/* General-purpose timer. */ -/* control/status register (can only be read/written via bit insns) */ -#define RPU_GTMC_ADDR 0xFFFFFB00 -#define RPU_GTMC (*(volatile unsigned char *)RPU_GTMC_ADDR) -#define RPU_GTMC_CE_BIT 7 /* clock enable (control) */ -#define RPU_GTMC_OV_BIT 6 /* overflow (status) */ -#define RPU_GTMC_CLK_BIT 1 /* 0 = .5 MHz CLK, 1 = 1 Mhz (control) */ -/* 32-bit count (8 least-significant bits are always zero). */ -#define RPU_GTM_ADDR 0xFFFFFB28 -#define RPU_GTM (*(volatile unsigned long *)RPU_GTMC_ADDR) - - -/* For <asm/page.h> */ -#define PAGE_OFFSET ERAM_ADDR /* minimum allocatable address */ - - -/* For <asm/entry.h> */ -/* `R0 RAM', used for a few miscellaneous variables that must be accessible - using a load instruction relative to R0. The FPGA implementation - actually has no on-chip RAM, so we use part of main ram just after the - interrupt vectors. */ -#ifdef __ASSEMBLY__ -#define R0_RAM_ADDR lo(C_SYMBOL_NAME(_r0_ram)) -#else -extern char _r0_ram; -#define R0_RAM_ADDR ((unsigned long)&_r0_ram); -#endif - - -#endif /* __V850_FPGA85E2C_H__ */ diff --git a/include/asm-v850/futex.h b/include/asm-v850/futex.h deleted file mode 100644 index 6a332a9f099..00000000000 --- a/include/asm-v850/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include <asm-generic/futex.h> - -#endif diff --git a/include/asm-v850/gbus_int.h b/include/asm-v850/gbus_int.h deleted file mode 100644 index 0c4bce753c7..00000000000 --- a/include/asm-v850/gbus_int.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * include/asm-v850/gbus_int.h -- Midas labs GBUS interrupt support - * - * Copyright (C) 2001,02 NEC Corporation - * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_GBUS_INT_H__ -#define __V850_GBUS_INT_H__ - - -/* The GBUS interrupt interface has 32 interrupts shared among 4 - processor interrupts. The 32 GBUS interrupts are divided into two - sets of 16 each, for allocating among control registers, etc (there - are two of each control register, with bits 0-15 controlling an - interrupt each). */ - -/* The GBUS interrupts themselves. */ -#define IRQ_GBUS_INT(n) (GBUS_INT_BASE_IRQ + (n)) -#define IRQ_GBUS_INT_NUM 32 - -/* Control registers. */ -#define GBUS_INT_STATUS_ADDR(w) (GBUS_INT_BASE_ADDR + (w)*0x40) -#define GBUS_INT_STATUS(w) (*(volatile u16 *)GBUS_INT_STATUS_ADDR(w)) -#define GBUS_INT_CLEAR_ADDR(w) (GBUS_INT_BASE_ADDR + 0x10 + (w)*0x40) -#define GBUS_INT_CLEAR(w) (*(volatile u16 *)GBUS_INT_CLEAR_ADDR(w)) -#define GBUS_INT_EDGE_ADDR(w) (GBUS_INT_BASE_ADDR + 0x20 + (w)*0x40) -#define GBUS_INT_EDGE(w) (*(volatile u16 *)GBUS_INT_EDGE_ADDR(w)) -#define GBUS_INT_POLARITY_ADDR(w) (GBUS_INT_BASE_ADDR + 0x30 + (w)*0x40) -#define GBUS_INT_POLARITY(w) (*(volatile u16 *)GBUS_INT_POLARITY_ADDR(w)) -/* This allows enabling interrupt bits in word W for interrupt GINTn. */ -#define GBUS_INT_ENABLE_ADDR(w, n) \ - (GBUS_INT_BASE_ADDR + 0x100 + (w)*0x10 + (n)*0x20) -#define GBUS_INT_ENABLE(w, n) (*(volatile u16 *)GBUS_INT_ENABLE_ADDR(w, n)) - -/* Mapping between kernel interrupt numbers and hardware control regs/bits. */ -#define GBUS_INT_BITS_PER_WORD 16 -#define GBUS_INT_NUM_WORDS (IRQ_GBUS_INT_NUM / GBUS_INT_BITS_PER_WORD) -#define GBUS_INT_IRQ_WORD(irq) (((irq) - GBUS_INT_BASE_IRQ) >> 4) -#define GBUS_INT_IRQ_BIT(irq) (((irq) - GBUS_INT_BASE_IRQ) & 0xF) -#define GBUS_INT_IRQ_MASK(irq) (1 << GBUS_INT_IRQ_BIT(irq)) - - -/* Possible priorities for GBUS interrupts. */ -#define GBUS_INT_PRIORITY_HIGH 2 -#define GBUS_INT_PRIORITY_MEDIUM 4 -#define GBUS_INT_PRIORITY_LOW 6 - - -#ifndef __ASSEMBLY__ - -/* Enable interrupt handling for interrupt IRQ. */ -extern void gbus_int_enable_irq (unsigned irq); -/* Disable interrupt handling for interrupt IRQ. Note that any - interrupts received while disabled will be delivered once the - interrupt is enabled again, unless they are explicitly cleared using - `gbus_int_clear_pending_irq'. */ -extern void gbus_int_disable_irq (unsigned irq); -/* Return true if interrupt handling for interrupt IRQ is enabled. */ -extern int gbus_int_irq_enabled (unsigned irq); -/* Disable all GBUS irqs. */ -extern void gbus_int_disable_irqs (void); -/* Clear any pending interrupts for IRQ. */ -extern void gbus_int_clear_pending_irq (unsigned irq); -/* Return true if interrupt IRQ is pending (but disabled). */ -extern int gbus_int_irq_pending (unsigned irq); - - -struct gbus_int_irq_init { - const char *name; /* name of interrupt type */ - - /* Range of kernel irq numbers for this type: - BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM */ - unsigned base, num, interval; - - unsigned priority; /* interrupt priority to assign */ -}; -struct hw_interrupt_type; /* fwd decl */ - -/* Initialize HW_IRQ_TYPES for GBUS irqs described in array - INITS (which is terminated by an entry with the name field == 0). */ -extern void gbus_int_init_irq_types (struct gbus_int_irq_init *inits, - struct hw_interrupt_type *hw_irq_types); - -/* Initialize GBUS interrupts. */ -extern void gbus_int_init_irqs (void); - -#endif /* !__ASSEMBLY__ */ - - -#endif /* __V850_GBUS_INT_H__ */ diff --git a/include/asm-v850/hardirq.h b/include/asm-v850/hardirq.h deleted file mode 100644 index 04e20127c5a..00000000000 --- a/include/asm-v850/hardirq.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __V850_HARDIRQ_H__ -#define __V850_HARDIRQ_H__ - -#include <linux/threads.h> -#include <linux/cache.h> - -#include <asm/irq.h> - -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -#define HARDIRQ_BITS 8 - -/* - * The hardirq mask has to be large enough to have - * space for potentially all IRQ sources in the system - * nesting on a single CPU: - */ -#if (1 << HARDIRQ_BITS) < NR_IRQS -# error HARDIRQ_BITS is too low! -#endif - -void ack_bad_irq(unsigned int irq); - -#endif /* __V850_HARDIRQ_H__ */ diff --git a/include/asm-v850/highres_timer.h b/include/asm-v850/highres_timer.h deleted file mode 100644 index 486fb49ceab..00000000000 --- a/include/asm-v850/highres_timer.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * include/asm-v850/highres_timer.h -- High resolution timing routines - * - * Copyright (C) 2001,03 NEC Electronics Corporation - * Copyright (C) 2001,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_HIGHRES_TIMER_H__ -#define __V850_HIGHRES_TIMER_H__ - -#ifndef __ASSEMBLY__ -#include <linux/time.h> -#endif - -#include <asm/entry.h> - - -/* Frequency of the `slow ticks' (one tick each time the fast-tick - counter overflows). */ -#define HIGHRES_TIMER_SLOW_TICK_RATE 25 - -/* Which timer in the V850E `Timer D' we use. */ -#define HIGHRES_TIMER_TIMER_D_UNIT 3 - - -#ifndef __ASSEMBLY__ - -extern void highres_timer_start (void), highres_timer_stop (void); -extern void highres_timer_reset (void); -extern void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks); -extern void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks, - struct timeval *tv); -extern void highres_timer_read (struct timeval *tv); - -#endif /* !__ASSEMBLY__ */ - - -#endif /* __V850_HIGHRES_TIMER_H__ */ diff --git a/include/asm-v850/hw_irq.h b/include/asm-v850/hw_irq.h deleted file mode 100644 index 043e94bb6bd..00000000000 --- a/include/asm-v850/hw_irq.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __V850_HW_IRQ_H__ -#define __V850_HW_IRQ_H__ - -#endif /* __V850_HW_IRQ_H__ */ diff --git a/include/asm-v850/io.h b/include/asm-v850/io.h deleted file mode 100644 index cdad251fba9..00000000000 --- a/include/asm-v850/io.h +++ /dev/null @@ -1,142 +0,0 @@ -/* - * include/asm-v850/io.h -- Misc I/O operations - * - * Copyright (C) 2001,02,03,04,05 NEC Electronics Corporation - * Copyright (C) 2001,02,03,04,05 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_IO_H__ -#define __V850_IO_H__ - -#define IO_SPACE_LIMIT 0xFFFFFFFF - -#define readb(addr) \ - ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) -#define readw(addr) \ - ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) -#define readl(addr) \ - ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; }) - -#define readb_relaxed(a) readb(a) -#define readw_relaxed(a) readw(a) -#define readl_relaxed(a) readl(a) - -#define writeb(val, addr) \ - (void)((*(volatile unsigned char *) (addr)) = (val)) -#define writew(val, addr) \ - (void)((*(volatile unsigned short *) (addr)) = (val)) -#define writel(val, addr) \ - (void)((*(volatile unsigned int *) (addr)) = (val)) - -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel - -#define inb(addr) readb (addr) -#define inw(addr) readw (addr) -#define inl(addr) readl (addr) -#define outb(x, addr) ((void) writeb (x, addr)) -#define outw(x, addr) ((void) writew (x, addr)) -#define outl(x, addr) ((void) writel (x, addr)) - -#define inb_p(port) inb((port)) -#define outb_p(val, port) outb((val), (port)) -#define inw_p(port) inw((port)) -#define outw_p(val, port) outw((val), (port)) -#define inl_p(port) inl((port)) -#define outl_p(val, port) outl((val), (port)) - -static inline void insb (unsigned long port, void *dst, unsigned long count) -{ - unsigned char *p = dst; - while (count--) - *p++ = inb (port); -} -static inline void insw (unsigned long port, void *dst, unsigned long count) -{ - unsigned short *p = dst; - while (count--) - *p++ = inw (port); -} -static inline void insl (unsigned long port, void *dst, unsigned long count) -{ - unsigned long *p = dst; - while (count--) - *p++ = inl (port); -} - -static inline void -outsb (unsigned long port, const void *src, unsigned long count) -{ - const unsigned char *p = src; - while (count--) - outb (*p++, port); -} -static inline void -outsw (unsigned long port, const void *src, unsigned long count) -{ - const unsigned short *p = src; - while (count--) - outw (*p++, port); -} -static inline void -outsl (unsigned long port, const void *src, unsigned long count) -{ - const unsigned long *p = src; - while (count--) - outl (*p++, port); -} - - -/* Some places try to pass in an loff_t for PHYSADDR (?!), so we cast it to - long before casting it to a pointer to avoid compiler warnings. */ -#define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr)) -#define iounmap(addr) ((void)0) - -#define ioremap_nocache(physaddr, size) ioremap (physaddr, size) -#define ioremap_writethrough(physaddr, size) ioremap (physaddr, size) -#define ioremap_fullcache(physaddr, size) ioremap (physaddr, size) - -#define ioread8(addr) readb (addr) -#define ioread16(addr) readw (addr) -#define ioread32(addr) readl (addr) -#define iowrite8(val, addr) writeb (val, addr) -#define iowrite16(val, addr) writew (val, addr) -#define iowrite32(val, addr) writel (val, addr) - -#define mmiowb() - -#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) -#if 0 -/* This is really stupid; don't define it. */ -#define page_to_bus(page) page_to_phys (page) -#endif - -/* Conversion between virtual and physical mappings. */ -#define phys_to_virt(addr) ((void *)__phys_to_virt (addr)) -#define virt_to_phys(addr) ((unsigned long)__virt_to_phys (addr)) - -#define memcpy_fromio(dst, src, len) memcpy (dst, (void *)src, len) -#define memcpy_toio(dst, src, len) memcpy ((void *)dst, src, len) - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __V850_IO_H__ */ diff --git a/include/asm-v850/ioctl.h b/include/asm-v850/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/include/asm-v850/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ioctl.h> diff --git a/include/asm-v850/ioctls.h b/include/asm-v850/ioctls.h deleted file mode 100644 index 5313abd5f38..00000000000 --- a/include/asm-v850/ioctls.h +++ /dev/null @@ -1,84 +0,0 @@ -#ifndef __V850_IOCTLS_H__ -#define __V850_IOCTLS_H__ - -#include <asm/ioctl.h> - -/* 0x54 is just a magic number to make these relatively unique ('T') */ - -#define TCGETS 0x5401 -#define TCSETS 0x5402 -#define TCSETSW 0x5403 -#define TCSETSF 0x5404 -#define TCGETA 0x5405 -#define TCSETA 0x5406 -#define TCSETAW 0x5407 -#define TCSETAF 0x5408 -#define TCSBRK 0x5409 -#define TCXONC 0x540A -#define TCFLSH 0x540B -#define TIOCEXCL 0x540C -#define TIOCNXCL 0x540D -#define TIOCSCTTY 0x540E -#define TIOCGPGRP 0x540F -#define TIOCSPGRP 0x5410 -#define TIOCOUTQ 0x5411 -#define TIOCSTI 0x5412 -#define TIOCGWINSZ 0x5413 -#define TIOCSWINSZ 0x5414 -#define TIOCMGET 0x5415 -#define TIOCMBIS 0x5416 -#define TIOCMBIC 0x5417 -#define TIOCMSET 0x5418 -#define TIOCGSOFTCAR 0x5419 -#define TIOCSSOFTCAR 0x541A -#define FIONREAD 0x541B -#define TIOCINQ FIONREAD -#define TIOCLINUX 0x541C -#define TIOCCONS 0x541D -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TIOCPKT 0x5420 -#define FIONBIO 0x5421 -#define TIOCNOTTY 0x5422 -#define TIOCSETD 0x5423 -#define TIOCGETD 0x5424 -#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ -#define TIOCSBRK 0x5427 /* BSD compatibility */ -#define TIOCCBRK 0x5428 /* BSD compatibility */ -#define TIOCGSID 0x5429 /* Return the session ID of FD */ -#define TCGETS2 _IOR('T',0x2A, struct termios2) -#define TCSETS2 _IOW('T',0x2B, struct termios2) -#define TCSETSW2 _IOW('T',0x2C, struct termios2) -#define TCSETSF2 _IOW('T',0x2D, struct termios2) -#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ -#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ - -#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ -#define FIOCLEX 0x5451 -#define FIOASYNC 0x5452 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ - -#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ -#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ -#define FIOQSIZE 0x545E - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -#endif /* __V850_IOCTLS_H__ */ diff --git a/include/asm-v850/ipcbuf.h b/include/asm-v850/ipcbuf.h deleted file mode 100644 index d8cbe9886d9..00000000000 --- a/include/asm-v850/ipcbuf.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __V850E_IPCBUF_H__ -#define __V850E_IPCBUF_H__ - -/* - * The user_ipc_perm structure for v850e architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode_t and seq - * - 2 miscellaneous 32-bit values - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - __kernel_mode_t mode; - unsigned short __pad1; - unsigned short seq; - unsigned short __pad2; - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* __V850E_IPCBUF_H__ */ diff --git a/include/asm-v850/irq.h b/include/asm-v850/irq.h deleted file mode 100644 index 7d0d4cd1ce5..00000000000 --- a/include/asm-v850/irq.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * include/asm-v850/irq.h -- Machine interrupt handling - * - * Copyright (C) 2001,02,04 NEC Electronics Corporation - * Copyright (C) 2001,02,04 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_IRQ_H__ -#define __V850_IRQ_H__ - -#include <asm/machdep.h> - -/* Default NUM_MACH_IRQS. */ -#ifndef NUM_MACH_IRQS -#define NUM_MACH_IRQS NUM_CPU_IRQS -#endif - -/* NMIs have IRQ numbers from FIRST_NMI to FIRST_NMI+NUM_NMIS-1. */ -#define FIRST_NMI NUM_MACH_IRQS -#define IRQ_NMI(n) (FIRST_NMI + (n)) -/* v850 processors have 3 non-maskable interrupts. */ -#define NUM_NMIS 3 - -/* Includes both maskable and non-maskable irqs. */ -#define NR_IRQS (NUM_MACH_IRQS + NUM_NMIS) - - -#ifndef __ASSEMBLY__ - -struct pt_regs; -struct hw_interrupt_type; -struct irqaction; - -#define irq_canonicalize(irq) (irq) - -/* Initialize irq handling for IRQs. - BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL - to IRQ_TYPE. An IRQ_TYPE of 0 means to use a generic interrupt type. */ -extern void -init_irq_handlers (int base_irq, int num, int interval, - struct hw_interrupt_type *irq_type); - -/* Handle interrupt IRQ. REGS are the registers at the time of ther - interrupt. */ -extern unsigned int handle_irq (int irq, struct pt_regs *regs); - -#endif /* !__ASSEMBLY__ */ - -#endif /* __V850_IRQ_H__ */ diff --git a/include/asm-v850/irq_regs.h b/include/asm-v850/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/include/asm-v850/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/include/asm-v850/kdebug.h b/include/asm-v850/kdebug.h deleted file mode 100644 index 6ece1b03766..00000000000 --- a/include/asm-v850/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kdebug.h> diff --git a/include/asm-v850/kmap_types.h b/include/asm-v850/kmap_types.h deleted file mode 100644 index 3288976b161..00000000000 --- a/include/asm-v850/kmap_types.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef __V850_KMAP_TYPES_H__ -#define __V850_KMAP_TYPES_H__ - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_TYPE_NR -}; - -#endif /* __V850_KMAP_TYPES_H__ */ diff --git a/include/asm-v850/kvm.h b/include/asm-v850/kvm.h deleted file mode 100644 index 3f729b79feb..00000000000 --- a/include/asm-v850/kvm.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __LINUX_KVM_V850_H -#define __LINUX_KVM_V850_H - -/* v850 does not support KVM */ - -#endif diff --git a/include/asm-v850/linkage.h b/include/asm-v850/linkage.h deleted file mode 100644 index b6185d3cfe6..00000000000 --- a/include/asm-v850/linkage.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#ifdef __ASSEMBLY__ -#include <asm/asm.h> -#endif - -#endif diff --git a/include/asm-v850/local.h b/include/asm-v850/local.h deleted file mode 100644 index 705148abe27..00000000000 --- a/include/asm-v850/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __V850_LOCAL_H__ -#define __V850_LOCAL_H__ - -#include <asm-generic/local.h> - -#endif /* __V850_LOCAL_H__ */ diff --git a/include/asm-v850/ma.h b/include/asm-v850/ma.h deleted file mode 100644 index 89e66473a17..00000000000 --- a/include/asm-v850/ma.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * include/asm-v850/ma.h -- V850E/MA series of cpu chips - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_MA_H__ -#define __V850_MA_H__ - -/* The MA series uses the V850E cpu core. */ -#include <asm/v850e.h> - - -/* For <asm/entry.h> */ -/* We use on-chip RAM, for a few miscellaneous variables that must be - accessible using a load instruction relative to R0. The amount - varies between chip models, but there's always at least 4K, and it - should always start at FFFFC000. */ -#define R0_RAM_ADDR 0xFFFFC000 - - -/* MA series UART details. */ -#define V850E_UART_BASE_FREQ CPU_CLOCK_FREQ - -/* This is a function that gets called before configuring the UART. */ -#define V850E_UART_PRE_CONFIGURE ma_uart_pre_configure -#ifndef __ASSEMBLY__ -extern void ma_uart_pre_configure (unsigned chan, - unsigned cflags, unsigned baud); -#endif - - -/* MA series timer C details. */ -#define V850E_TIMER_C_BASE_ADDR 0xFFFFF600 - - -/* MA series timer D details. */ -#define V850E_TIMER_D_BASE_ADDR 0xFFFFF540 -#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0) -#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2) -#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4) - -#define V850E_TIMER_D_BASE_FREQ CPU_CLOCK_FREQ - - -/* Port 0 */ -/* Direct I/O. Bits 0-7 are pins P00-P07. */ -#define MA_PORT0_IO_ADDR 0xFFFFF400 -#define MA_PORT0_IO (*(volatile u8 *)MA_PORT0_IO_ADDR) -/* Port mode (for direct I/O, 0 = output, 1 = input). */ -#define MA_PORT0_PM_ADDR 0xFFFFF420 -#define MA_PORT0_PM (*(volatile u8 *)MA_PORT0_PM_ADDR) -/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ -#define MA_PORT0_PMC_ADDR 0xFFFFF440 -#define MA_PORT0_PMC (*(volatile u8 *)MA_PORT0_PMC_ADDR) -/* Port function control (for P04-P07, 0 = IRQ, 1 = DMARQ). */ -#define MA_PORT0_PFC_ADDR 0xFFFFF460 -#define MA_PORT0_PFC (*(volatile u8 *)MA_PORT0_PFC_ADDR) - -/* Port 1 */ -/* Direct I/O. Bits 0-3 are pins P10-P13. */ -#define MA_PORT1_IO_ADDR 0xFFFFF402 -#define MA_PORT1_IO (*(volatile u8 *)MA_PORT1_IO_ADDR) -/* Port mode (for direct I/O, 0 = output, 1 = input). */ -#define MA_PORT1_PM_ADDR 0xFFFFF420 -#define MA_PORT1_PM (*(volatile u8 *)MA_PORT1_PM_ADDR) -/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ -#define MA_PORT1_PMC_ADDR 0xFFFFF442 -#define MA_PORT1_PMC (*(volatile u8 *)MA_PORT1_PMC_ADDR) - -/* Port 4 */ -/* Direct I/O. Bits 0-5 are pins P40-P45. */ -#define MA_PORT4_IO_ADDR 0xFFFFF408 -#define MA_PORT4_IO (*(volatile u8 *)MA_PORT4_IO_ADDR) -/* Port mode (for direct I/O, 0 = output, 1 = input). */ -#define MA_PORT4_PM_ADDR 0xFFFFF428 -#define MA_PORT4_PM (*(volatile u8 *)MA_PORT4_PM_ADDR) -/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ -#define MA_PORT4_PMC_ADDR 0xFFFFF448 -#define MA_PORT4_PMC (*(volatile u8 *)MA_PORT4_PMC_ADDR) -/* Port function control (for serial interfaces, 0 = CSI, 1 = UART). */ -#define MA_PORT4_PFC_ADDR 0xFFFFF468 -#define MA_PORT4_PFC (*(volatile u8 *)MA_PORT4_PFC_ADDR) - - -#ifndef __ASSEMBLY__ - -/* Initialize MA chip interrupts. */ -extern void ma_init_irqs (void); - -#endif /* !__ASSEMBLY__ */ - - -#endif /* __V850_MA_H__ */ diff --git a/include/asm-v850/ma1.h b/include/asm-v850/ma1.h deleted file mode 100644 index ede1f1de2b7..00000000000 --- a/include/asm-v850/ma1.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * include/asm-v850/ma1.h -- V850E/MA1 cpu chip - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_MA1_H__ -#define __V850_MA1_H__ - -/* Inherit more generic details from MA series. */ -#include <asm/ma.h> - - -#define CPU_MODEL "v850e/ma1" -#define CPU_MODEL_LONG "NEC V850E/MA1" - - -/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */ -#define IRQ_INTOV(n) (n) /* 0-3 */ -#define IRQ_INTOV_NUM 4 -#define IRQ_INTP(n) (0x4 + (n)) /* Pnnn (pin) interrupts */ -#define IRQ_INTP_NUM 24 -#define IRQ_INTCMD(n) (0x1c + (n)) /* interval timer interrupts 0-3 */ -#define IRQ_INTCMD_NUM 4 -#define IRQ_INTDMA(n) (0x20 + (n)) /* DMA interrupts 0-3 */ -#define IRQ_INTDMA_NUM 4 -#define IRQ_INTCSI(n) (0x24 + (n)*4)/* CSI 0-2 transmit/receive completion */ -#define IRQ_INTCSI_NUM 3 -#define IRQ_INTSER(n) (0x25 + (n)*4) /* UART 0-2 reception error */ -#define IRQ_INTSER_NUM 3 -#define IRQ_INTSR(n) (0x26 + (n)*4) /* UART 0-2 reception completion */ -#define IRQ_INTSR_NUM 3 -#define IRQ_INTST(n) (0x27 + (n)*4) /* UART 0-2 transmission completion */ -#define IRQ_INTST_NUM 3 - -#define NUM_CPU_IRQS 0x30 - - -/* The MA1 has a UART with 3 channels. */ -#define V850E_UART_NUM_CHANNELS 3 - - -#endif /* __V850_MA1_H__ */ diff --git a/include/asm-v850/machdep.h b/include/asm-v850/machdep.h deleted file mode 100644 index f1e3b8b9150..00000000000 --- a/include/asm-v850/machdep.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * include/asm-v850/machdep.h -- Machine-dependent definitions - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_MACHDEP_H__ -#define __V850_MACHDEP_H__ - - -/* chips */ -#ifdef CONFIG_V850E_MA1 -#include <asm/ma1.h> -#endif -#ifdef CONFIG_V850E_ME2 -#include <asm/me2.h> -#endif -#ifdef CONFIG_V850E_TEG -#include <asm/teg.h> -#endif - -/* These are both chips _and_ platforms, so put them in the middle... */ -#ifdef CONFIG_V850E2_ANNA -#include <asm/anna.h> -#endif -#ifdef CONFIG_V850E_AS85EP1 -#include <asm/as85ep1.h> -#endif - -/* platforms */ -#ifdef CONFIG_RTE_CB_MA1 -#include <asm/rte_ma1_cb.h> -#endif -#ifdef CONFIG_RTE_CB_ME2 -#include <asm/rte_me2_cb.h> -#endif -#ifdef CONFIG_RTE_CB_NB85E -#include <asm/rte_nb85e_cb.h> -#endif -#ifdef CONFIG_V850E_SIM -#include <asm/sim.h> -#endif -#ifdef CONFIG_V850E2_SIM85E2C -#include <asm/sim85e2c.h> -#endif -#ifdef CONFIG_V850E2_SIM85E2S -#include <asm/sim85e2s.h> -#endif -#ifdef CONFIG_V850E2_FPGA85E2C -#include <asm/fpga85e2c.h> -#endif - -#endif /* __V850_MACHDEP_H__ */ diff --git a/include/asm-v850/macrology.h b/include/asm-v850/macrology.h deleted file mode 100644 index 37abf874832..00000000000 --- a/include/asm-v850/macrology.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * include/asm-v850/macrology.h -- Various useful CPP macros - * - * Copyright (C) 2001 NEC Corporation - * Copyright (C) 2001 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#define macrology_paste(arg1, arg2) macrology_paste_1(arg1, arg2) -#define macrology_paste_1(arg1, arg2) arg1 ## arg2 -#define macrology_stringify(sym) macrology_stringify_1(sym) -#define macrology_stringify_1(sym) #sym diff --git a/include/asm-v850/me2.h b/include/asm-v850/me2.h deleted file mode 100644 index ac7c9ce0bdc..00000000000 --- a/include/asm-v850/me2.h +++ /dev/null @@ -1,182 +0,0 @@ -/* - * include/asm-v850/me2.h -- V850E/ME2 cpu chip - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_ME2_H__ -#define __V850_ME2_H__ - -#include <asm/v850e.h> -#include <asm/v850e_cache.h> - - -#define CPU_MODEL "v850e/me2" -#define CPU_MODEL_LONG "NEC V850E/ME2" - - -/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */ -#define IRQ_INTP(n) (n) /* Pnnn (pin) interrupts */ -#define IRQ_INTP_NUM 31 -#define IRQ_INTCMD(n) (0x31 + (n)) /* interval timer interrupts 0-3 */ -#define IRQ_INTCMD_NUM 4 -#define IRQ_INTDMA(n) (0x41 + (n)) /* DMA interrupts 0-3 */ -#define IRQ_INTDMA_NUM 4 -#define IRQ_INTUBTIRE(n) (0x49 + (n)*5)/* UARTB 0-1 reception error */ -#define IRQ_INTUBTIRE_NUM 2 -#define IRQ_INTUBTIR(n) (0x4a + (n)*5) /* UARTB 0-1 reception complete */ -#define IRQ_INTUBTIR_NUM 2 -#define IRQ_INTUBTIT(n) (0x4b + (n)*5) /* UARTB 0-1 transmission complete */ -#define IRQ_INTUBTIT_NUM 2 -#define IRQ_INTUBTIF(n) (0x4c + (n)*5) /* UARTB 0-1 FIFO trans. complete */ -#define IRQ_INTUBTIF_NUM 2 -#define IRQ_INTUBTITO(n) (0x4d + (n)*5) /* UARTB 0-1 reception timeout */ -#define IRQ_INTUBTITO_NUM 2 - -/* For <asm/irq.h> */ -#define NUM_CPU_IRQS 0x59 /* V850E/ME2 */ - - -/* For <asm/entry.h> */ -/* We use on-chip RAM, for a few miscellaneous variables that must be - accessible using a load instruction relative to R0. */ -#define R0_RAM_ADDR 0xFFFFB000 /* V850E/ME2 */ - - -/* V850E/ME2 UARTB details.*/ -#define V850E_UART_NUM_CHANNELS 2 -#define V850E_UARTB_BASE_FREQ (CPU_CLOCK_FREQ / 4) - -/* This is a function that gets called before configuring the UART. */ -#define V850E_UART_PRE_CONFIGURE me2_uart_pre_configure -#ifndef __ASSEMBLY__ -extern void me2_uart_pre_configure (unsigned chan, - unsigned cflags, unsigned baud); -#endif /* __ASSEMBLY__ */ - - -/* V850E/ME2 timer C details. */ -#define V850E_TIMER_C_BASE_ADDR 0xFFFFF600 - - -/* V850E/ME2 timer D details. */ -#define V850E_TIMER_D_BASE_ADDR 0xFFFFF540 -#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0) -#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2) -#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4) - -#define V850E_TIMER_D_BASE_FREQ (CPU_CLOCK_FREQ / 2) - - -/* Select iRAM mode. */ -#define ME2_IRAMM_ADDR 0xFFFFF80A -#define ME2_IRAMM (*(volatile u8*)ME2_IRAMM_ADDR) - - -/* Interrupt edge-detection configuration. INTF(n) and INTR(n) are only - valid for n == 1, 2, or 5. */ -#define ME2_INTF_ADDR(n) (0xFFFFFC00 + (n) * 0x2) -#define ME2_INTF(n) (*(volatile u8*)ME2_INTF_ADDR(n)) -#define ME2_INTR_ADDR(n) (0xFFFFFC20 + (n) * 0x2) -#define ME2_INTR(n) (*(volatile u8*)ME2_INTR_ADDR(n)) -#define ME2_INTFAL_ADDR 0xFFFFFC10 -#define ME2_INTFAL (*(volatile u8*)ME2_INTFAL_ADDR) -#define ME2_INTRAL_ADDR 0xFFFFFC30 -#define ME2_INTRAL (*(volatile u8*)ME2_INTRAL_ADDR) -#define ME2_INTFDH_ADDR 0xFFFFFC16 -#define ME2_INTFDH (*(volatile u16*)ME2_INTFDH_ADDR) -#define ME2_INTRDH_ADDR 0xFFFFFC36 -#define ME2_INTRDH (*(volatile u16*)ME2_INTRDH_ADDR) -#define ME2_SESC_ADDR(n) (0xFFFFF609 + (n) * 0x10) -#define ME2_SESC(n) (*(volatile u8*)ME2_SESC_ADDR(n)) -#define ME2_SESA10_ADDR 0xFFFFF5AD -#define ME2_SESA10 (*(volatile u8*)ME2_SESA10_ADDR) -#define ME2_SESA11_ADDR 0xFFFFF5DD -#define ME2_SESA11 (*(volatile u8*)ME2_SESA11_ADDR) - - -/* Port 1 */ -/* Direct I/O. Bits 0-3 are pins P10-P13. */ -#define ME2_PORT1_IO_ADDR 0xFFFFF402 -#define ME2_PORT1_IO (*(volatile u8 *)ME2_PORT1_IO_ADDR) -/* Port mode (for direct I/O, 0 = output, 1 = input). */ -#define ME2_PORT1_PM_ADDR 0xFFFFF422 -#define ME2_PORT1_PM (*(volatile u8 *)ME2_PORT1_PM_ADDR) -/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ -#define ME2_PORT1_PMC_ADDR 0xFFFFF442 -#define ME2_PORT1_PMC (*(volatile u8 *)ME2_PORT1_PMC_ADDR) -/* Port function control (for serial interfaces, 0 = CSI30, 1 = UARTB0 ). */ -#define ME2_PORT1_PFC_ADDR 0xFFFFF462 -#define ME2_PORT1_PFC (*(volatile u8 *)ME2_PORT1_PFC_ADDR) - -/* Port 2 */ -/* Direct I/O. Bits 0-3 are pins P20-P25. */ -#define ME2_PORT2_IO_ADDR 0xFFFFF404 -#define ME2_PORT2_IO (*(volatile u8 *)ME2_PORT2_IO_ADDR) -/* Port mode (for direct I/O, 0 = output, 1 = input). */ -#define ME2_PORT2_PM_ADDR 0xFFFFF424 -#define ME2_PORT2_PM (*(volatile u8 *)ME2_PORT2_PM_ADDR) -/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ -#define ME2_PORT2_PMC_ADDR 0xFFFFF444 -#define ME2_PORT2_PMC (*(volatile u8 *)ME2_PORT2_PMC_ADDR) -/* Port function control (for serial interfaces, 0 = INTP2x, 1 = UARTB1 ). */ -#define ME2_PORT2_PFC_ADDR 0xFFFFF464 -#define ME2_PORT2_PFC (*(volatile u8 *)ME2_PORT2_PFC_ADDR) - -/* Port 5 */ -/* Direct I/O. Bits 0-5 are pins P50-P55. */ -#define ME2_PORT5_IO_ADDR 0xFFFFF40A -#define ME2_PORT5_IO (*(volatile u8 *)ME2_PORT5_IO_ADDR) -/* Port mode (for direct I/O, 0 = output, 1 = input). */ -#define ME2_PORT5_PM_ADDR 0xFFFFF42A -#define ME2_PORT5_PM (*(volatile u8 *)ME2_PORT5_PM_ADDR) -/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ -#define ME2_PORT5_PMC_ADDR 0xFFFFF44A -#define ME2_PORT5_PMC (*(volatile u8 *)ME2_PORT5_PMC_ADDR) -/* Port function control (). */ -#define ME2_PORT5_PFC_ADDR 0xFFFFF46A -#define ME2_PORT5_PFC (*(volatile u8 *)ME2_PORT5_PFC_ADDR) - -/* Port 6 */ -/* Direct I/O. Bits 5-7 are pins P65-P67. */ -#define ME2_PORT6_IO_ADDR 0xFFFFF40C -#define ME2_PORT6_IO (*(volatile u8 *)ME2_PORT6_IO_ADDR) -/* Port mode (for direct I/O, 0 = output, 1 = input). */ -#define ME2_PORT6_PM_ADDR 0xFFFFF42C -#define ME2_PORT6_PM (*(volatile u8 *)ME2_PORT6_PM_ADDR) -/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ -#define ME2_PORT6_PMC_ADDR 0xFFFFF44C -#define ME2_PORT6_PMC (*(volatile u8 *)ME2_PORT6_PMC_ADDR) -/* Port function control (). */ -#define ME2_PORT6_PFC_ADDR 0xFFFFF46C -#define ME2_PORT6_PFC (*(volatile u8 *)ME2_PORT6_PFC_ADDR) - -/* Port 7 */ -/* Direct I/O. Bits 2-7 are pins P72-P77. */ -#define ME2_PORT7_IO_ADDR 0xFFFFF40E -#define ME2_PORT7_IO (*(volatile u8 *)ME2_PORT7_IO_ADDR) -/* Port mode (for direct I/O, 0 = output, 1 = input). */ -#define ME2_PORT7_PM_ADDR 0xFFFFF42E -#define ME2_PORT7_PM (*(volatile u8 *)ME2_PORT7_PM_ADDR) -/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ -#define ME2_PORT7_PMC_ADDR 0xFFFFF44E -#define ME2_PORT7_PMC (*(volatile u8 *)ME2_PORT7_PMC_ADDR) -/* Port function control (). */ -#define ME2_PORT7_PFC_ADDR 0xFFFFF46E -#define ME2_PORT7_PFC (*(volatile u8 *)ME2_PORT7_PFC_ADDR) - - -#ifndef __ASSEMBLY__ -/* Initialize V850E/ME2 chip interrupts. */ -extern void me2_init_irqs (void); -#endif /* !__ASSEMBLY__ */ - - -#endif /* __V850_ME2_H__ */ diff --git a/include/asm-v850/mman.h b/include/asm-v850/mman.h deleted file mode 100644 index edbf6edbfb3..00000000000 --- a/include/asm-v850/mman.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __V850_MMAN_H__ -#define __V850_MMAN_H__ - -#include <asm-generic/mman.h> - -#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ -#define MAP_LOCKED 0x2000 /* pages are locked */ -#define MAP_NORESERVE 0x4000 /* don't check for reservations */ - -#define MCL_CURRENT 1 /* lock all current mappings */ -#define MCL_FUTURE 2 /* lock all future mappings */ - -#endif /* __V850_MMAN_H__ */ diff --git a/include/asm-v850/mmu.h b/include/asm-v850/mmu.h deleted file mode 100644 index 267768c66ef..00000000000 --- a/include/asm-v850/mmu.h +++ /dev/null @@ -1,11 +0,0 @@ -/* Copyright (C) 2002, 2005, David McCullough <davidm@snapgear.com> */ - -#ifndef __V850_MMU_H__ -#define __V850_MMU_H__ - -typedef struct { - struct vm_list_struct *vmlist; - unsigned long end_brk; -} mm_context_t; - -#endif /* __V850_MMU_H__ */ diff --git a/include/asm-v850/mmu_context.h b/include/asm-v850/mmu_context.h deleted file mode 100644 index 01daacd5474..00000000000 --- a/include/asm-v850/mmu_context.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __V850_MMU_CONTEXT_H__ -#define __V850_MMU_CONTEXT_H__ - -#include <asm-generic/mm_hooks.h> - -#define destroy_context(mm) ((void)0) -#define init_new_context(tsk,mm) 0 -#define switch_mm(prev,next,tsk) ((void)0) -#define deactivate_mm(tsk,mm) do { } while (0) -#define activate_mm(prev,next) ((void)0) -#define enter_lazy_tlb(mm,tsk) ((void)0) - -#endif /* __V850_MMU_CONTEXT_H__ */ diff --git a/include/asm-v850/module.h b/include/asm-v850/module.h deleted file mode 100644 index 2c2f4944f09..00000000000 --- a/include/asm-v850/module.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * include/asm-v850/module.h -- Architecture-specific module hooks - * - * Copyright (C) 2001,02,03,04 NEC Corporation - * Copyright (C) 2001,02,03,04 Miles Bader <miles@gnu.org> - * Copyright (C) 2001,03 Rusty Russell - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - * - * Derived in part from include/asm-ppc/module.h - */ - -#ifndef __V850_MODULE_H__ -#define __V850_MODULE_H__ - -#define MODULE_SYMBOL_PREFIX "_" - -struct v850_plt_entry -{ - /* Indirect jump instruction sequence (6-byte mov + 2-byte jr). */ - unsigned long tramp[2]; -}; - -struct mod_arch_specific -{ - /* Indices of PLT sections within module. */ - unsigned int core_plt_section, init_plt_section; -}; - -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr - -/* Make empty sections for module_frob_arch_sections to expand. */ -#ifdef MODULE -asm(".section .plt,\"ax\",@nobits; .align 3; .previous"); -asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous"); -#endif - -/* We don't do exception tables. */ -struct exception_table_entry; -static inline const struct exception_table_entry * -search_extable(const struct exception_table_entry *first, - const struct exception_table_entry *last, - unsigned long value) -{ - return 0; -} -#define ARCH_HAS_SEARCH_EXTABLE -static inline void -sort_extable(struct exception_table_entry *start, - struct exception_table_entry *finish) -{ - /* nada */ -} -#define ARCH_HAS_SORT_EXTABLE - -#endif /* __V850_MODULE_H__ */ diff --git a/include/asm-v850/msgbuf.h b/include/asm-v850/msgbuf.h deleted file mode 100644 index ed07dbd0163..00000000000 --- a/include/asm-v850/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __V850_MSGBUF_H__ -#define __V850_MSGBUF_H__ - -/* - * The msqid64_ds structure for v850 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* __V850_MSGBUF_H__ */ diff --git a/include/asm-v850/mutex.h b/include/asm-v850/mutex.h deleted file mode 100644 index 458c1f7fbc1..00000000000 --- a/include/asm-v850/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include <asm-generic/mutex-dec.h> diff --git a/include/asm-v850/page.h b/include/asm-v850/page.h deleted file mode 100644 index 74a539a9bd5..00000000000 --- a/include/asm-v850/page.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * include/asm-v850/page.h -- VM ops - * - * Copyright (C) 2001,02,03,05 NEC Electronics Corporation - * Copyright (C) 2001,02,03,05 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_PAGE_H__ -#define __V850_PAGE_H__ - -#include <asm/machdep.h> - - -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - - -/* - * PAGE_OFFSET -- the first address of the first page of memory. For archs with - * no MMU this corresponds to the first free page in physical memory (aligned - * on a page boundary). - */ -#ifndef PAGE_OFFSET -#define PAGE_OFFSET 0x0000000 -#endif - - -#ifndef __ASSEMBLY__ - -#define STRICT_MM_TYPECHECKS - -#define clear_page(page) memset ((void *)(page), 0, PAGE_SIZE) -#define copy_page(to, from) memcpy ((void *)(to), (void *)from, PAGE_SIZE) - -#define clear_user_page(addr, vaddr, page) \ - do { clear_page(addr); \ - flush_dcache_page(page); \ - } while (0) -#define copy_user_page(to, from, vaddr, page) \ - do { copy_page(to, from); \ - flush_dcache_page(page); \ - } while (0) - -#ifdef STRICT_MM_TYPECHECKS -/* - * These are used to make use of C type-checking.. - */ - -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).pmd) -#define pgd_val(x) ((x).pgd) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#else /* !STRICT_MM_TYPECHECKS */ -/* - * .. while these make it easier on the compiler - */ - -typedef unsigned long pte_t; -typedef unsigned long pmd_t; -typedef unsigned long pgd_t; -typedef unsigned long pgprot_t; - -#define pte_val(x) (x) -#define pmd_val(x) (x) -#define pgd_val(x) (x) -#define pgprot_val(x) (x) - -#define __pte(x) (x) -#define __pmd(x) (x) -#define __pgd(x) (x) -#define __pgprot(x) (x) - -#endif /* STRICT_MM_TYPECHECKS */ - -#endif /* !__ASSEMBLY__ */ - - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) - - -/* No current v850 processor has virtual memory. */ -#define __virt_to_phys(addr) (addr) -#define __phys_to_virt(addr) (addr) - -#define virt_to_pfn(kaddr) (__virt_to_phys (kaddr) >> PAGE_SHIFT) -#define pfn_to_virt(pfn) __phys_to_virt ((pfn) << PAGE_SHIFT) - -#define MAP_NR(kaddr) \ - (((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT) -#define virt_to_page(kaddr) (mem_map + MAP_NR (kaddr)) -#define page_to_virt(page) \ - ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) - -#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) -#define pfn_valid(pfn) ((pfn) < max_mapnr) - -#define virt_addr_valid(kaddr) \ - (((void *)(kaddr) >= (void *)PAGE_OFFSET) && MAP_NR (kaddr) < max_mapnr) - - -#define __pa(x) __virt_to_phys ((unsigned long)(x)) -#define __va(x) ((void *)__phys_to_virt ((unsigned long)(x))) - - -#include <asm-generic/memory_model.h> -#include <asm-generic/page.h> - -#endif /* __V850_PAGE_H__ */ diff --git a/include/asm-v850/param.h b/include/asm-v850/param.h deleted file mode 100644 index 4391f5fe020..00000000000 --- a/include/asm-v850/param.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * include/asm-v850/param.h -- Varions kernel parameters - * - * Copyright (C) 2001,02 NEC Corporation - * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_PARAM_H__ -#define __V850_PARAM_H__ - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ -# define USER_HZ 100 -# define CLOCKS_PER_SEC USER_HZ -#else -# define HZ 100 -#endif - -#endif /* __V850_PARAM_H__ */ diff --git a/include/asm-v850/pci.h b/include/asm-v850/pci.h deleted file mode 100644 index de2a7d0a81c..00000000000 --- a/include/asm-v850/pci.h +++ /dev/null @@ -1,119 +0,0 @@ -/* - * include/asm-v850/pci.h -- PCI support - * - * Copyright (C) 2001,02,05 NEC Corporation - * Copyright (C) 2001,02,05 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_PCI_H__ -#define __V850_PCI_H__ - -/* Get any platform-dependent definitions. */ -#include <asm/machdep.h> - -#define pcibios_scan_all_fns(a, b) 0 - -/* Generic declarations. */ - -struct scatterlist; - -extern void pcibios_set_master (struct pci_dev *dev); - -/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA. The - 32-bit PCI bus mastering address to use is returned. the device owns - this memory until either pci_unmap_single or pci_dma_sync_single_for_cpu is - performed. */ -extern dma_addr_t -pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir); - -/* Return to the CPU the PCI DMA memory block previously `granted' to - PDEV, at DMA_ADDR. */ -extern void -pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size, - int dir); - -/* Make physical memory consistent for a single streaming mode DMA - translation after a transfer. - - If you perform a pci_map_single() but wish to interrogate the - buffer using the cpu, yet do not wish to teardown the PCI dma - mapping, you must call this function before doing so. At the next - point you give the PCI dma address back to the card, you must first - perform a pci_dma_sync_for_device, and then the device again owns - the buffer. */ -extern void -pci_dma_sync_single_for_cpu (struct pci_dev *dev, dma_addr_t dma_addr, - size_t size, int dir); - -extern void -pci_dma_sync_single_for_device (struct pci_dev *dev, dma_addr_t dma_addr, - size_t size, int dir); - - -/* Do multiple DMA mappings at once. */ -extern int -pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir); - -/* Unmap multiple DMA mappings at once. */ -extern void -pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, - int dir); - -/* SG-list versions of pci_dma_sync functions. */ -extern void -pci_dma_sync_sg_for_cpu (struct pci_dev *dev, - struct scatterlist *sg, int sg_len, - int dir); -extern void -pci_dma_sync_sg_for_device (struct pci_dev *dev, - struct scatterlist *sg, int sg_len, - int dir); - -#define pci_map_page(dev, page, offs, size, dir) \ - pci_map_single(dev, (page_address(page) + (offs)), size, dir) -#define pci_unmap_page(dev,addr,sz,dir) \ - pci_unmap_single(dev, addr, sz, dir) - -/* Test for pci_map_single or pci_map_page having generated an error. */ -static inline int -pci_dma_mapping_error (dma_addr_t dma_addr) -{ - return dma_addr == 0; -} - -/* Allocate and map kernel buffer using consistent mode DMA for PCI - device. Returns non-NULL cpu-view pointer to the buffer if - successful and sets *DMA_ADDR to the pci side dma address as well, - else DMA_ADDR is undefined. */ -extern void * -pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr); - -/* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must - be values that were returned from pci_alloc_consistent. SIZE must be - the same as what as passed into pci_alloc_consistent. References to - the memory and mappings assosciated with CPU_ADDR or DMA_ADDR past - this call are illegal. */ -extern void -pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr, - dma_addr_t dma_addr); - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); -extern void pci_iounmap (struct pci_dev *dev, void __iomem *addr); - -#endif /* __V850_PCI_H__ */ diff --git a/include/asm-v850/percpu.h b/include/asm-v850/percpu.h deleted file mode 100644 index 755ac6522b6..00000000000 --- a/include/asm-v850/percpu.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __V850_PERCPU_H__ -#define __V850_PERCPU_H__ - -#include <asm-generic/percpu.h> - -/* This is a stupid hack to satisfy some grotty implicit include-file - dependency; basically, <linux/smp.h> uses BUG_ON, which calls BUG, but - doesn't include the necessary headers to define it. In the twisted - festering mess of includes this must all be resolved somehow on other - platforms, but I haven't the faintest idea how, and don't care; here will - do, even though doesn't actually make any sense. */ -#include <asm/page.h> - -#endif /* __V850_PERCPU_H__ */ diff --git a/include/asm-v850/pgalloc.h b/include/asm-v850/pgalloc.h deleted file mode 100644 index b91eb2d02bf..00000000000 --- a/include/asm-v850/pgalloc.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * include/asm-v850/pgalloc.h - * - * Copyright (C) 2001,02 NEC Corporation - * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_PGALLOC_H__ -#define __V850_PGALLOC_H__ - -#include <linux/mm.h> /* some crap code expects this */ - -/* ... and then, there was one. */ -#define check_pgt_cache() ((void)0) - -#endif /* __V850_PGALLOC_H__ */ diff --git a/include/asm-v850/pgtable.h b/include/asm-v850/pgtable.h deleted file mode 100644 index 1ea2a900f0f..00000000000 --- a/include/asm-v850/pgtable.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef __V850_PGTABLE_H__ -#define __V850_PGTABLE_H__ - -#include <asm-generic/4level-fixup.h> - -#include <asm/page.h> - - -#define pgd_present(pgd) (1) /* pages are always present on NO_MM */ -#define pgd_none(pgd) (0) -#define pgd_bad(pgd) (0) -#define pgd_clear(pgdp) ((void)0) - -#define pmd_offset(a, b) ((void *)0) - -#define kern_addr_valid(addr) (1) - - -#define __swp_type(x) (0) -#define __swp_offset(x) (0) -#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -static inline int pte_file (pte_t pte) { return 0; } - - -/* These mean nothing to !CONFIG_MMU. */ -#define PAGE_NONE __pgprot(0) -#define PAGE_SHARED __pgprot(0) -#define PAGE_COPY __pgprot(0) -#define PAGE_READONLY __pgprot(0) -#define PAGE_KERNEL __pgprot(0) - - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc. When CONFIG_MMU is not defined, this - * should never actually be used, so just define it to something that's - * will hopefully cause a bus error if it is. - */ -#define ZERO_PAGE(vaddr) ((void *)0x87654321) - - -/* Some bogus code in procfs uses these; whatever. */ -#define VMALLOC_START 0 -#define VMALLOC_END (~0) - - -extern void paging_init (void); -#define swapper_pg_dir ((pgd_t *) 0) - -#define pgtable_cache_init() ((void)0) - - -extern unsigned int kobjsize(const void *objp); - - -#endif /* __V850_PGTABLE_H__ */ diff --git a/include/asm-v850/poll.h b/include/asm-v850/poll.h deleted file mode 100644 index 803cad0b9b5..00000000000 --- a/include/asm-v850/poll.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __V850_POLL_H__ -#define __V850_POLL_H__ - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 0x0100 - -#include <asm-generic/poll.h> - -#endif /* __V850_POLL_H__ */ diff --git a/include/asm-v850/posix_types.h b/include/asm-v850/posix_types.h deleted file mode 100644 index 7f403b76539..00000000000 --- a/include/asm-v850/posix_types.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * include/asm-v850/posix_types.h -- Kernel versions of standard types - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_POSIX_TYPES_H__ -#define __V850_POSIX_TYPES_H__ - -typedef unsigned long __kernel_ino_t; -typedef unsigned long long __kernel_ino64_t; -typedef unsigned int __kernel_mode_t; -typedef unsigned int __kernel_nlink_t; -typedef long __kernel_off_t; -typedef long long __kernel_loff_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned int __kernel_uid_t; -typedef unsigned int __kernel_gid_t; -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_timer_t; -typedef int __kernel_clockid_t; -typedef int __kernel_daddr_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; - -/* Some bogus code depends on this; we don't care. */ -typedef __kernel_uid_t __kernel_old_uid_t; -typedef unsigned int __kernel_old_dev_t; - -typedef struct { - int val[2]; -} __kernel_fsid_t; - - -#if defined(__KERNEL__) - -/* We used to include <asm/bitops.h> here, which seems the right thing, but - it caused nasty include-file definition order problems. Removing the - include seems to work, so fingers crossed... */ - -#undef __FD_SET -#define __FD_SET(fd, fd_set) \ - __set_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits) -#undef __FD_CLR -#define __FD_CLR(fd, fd_set) \ - __clear_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits) -#undef __FD_ISSET -#define __FD_ISSET(fd, fd_set) \ - __test_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits) -#undef __FD_ZERO -#define __FD_ZERO(fd_set) \ - memset (fd_set, 0, sizeof (*(fd_set *)fd_set)) - -#endif /* defined(__KERNEL__) */ - -#endif /* __V850_POSIX_TYPES_H__ */ diff --git a/include/asm-v850/processor.h b/include/asm-v850/processor.h deleted file mode 100644 index 979e3467f9a..00000000000 --- a/include/asm-v850/processor.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * include/asm-v850/processor.h - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_PROCESSOR_H__ -#define __V850_PROCESSOR_H__ - -#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe. */ -#include <linux/thread_info.h> -#endif - -#include <linux/compiler.h> -#include <asm/ptrace.h> -#include <asm/entry.h> - -/* Some code expects `segment' stuff to be defined here. */ -#include <asm/segment.h> - - -/* - * The only places this is used seem to be horrible bletcherous kludges, - * so we just define it to be as large as possible. - */ -#define TASK_SIZE (0xFFFFFFFF) - -/* - * This decides where the kernel will search for a free chunk of vm - * space during mmap's. We won't be using it. - */ -#define TASK_UNMAPPED_BASE 0 - - -#ifndef __ASSEMBLY__ - - -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -/* If you change this, you must change the associated assembly-languages - constants defined below, THREAD_*. */ -struct thread_struct { - /* kernel stack pointer (must be first field in structure) */ - unsigned long ksp; -}; - -#define INIT_THREAD { sizeof init_stack + (unsigned long)init_stack } - - -/* Do necessary setup to start up a newly executed thread. */ -static inline void start_thread (struct pt_regs *regs, - unsigned long pc, unsigned long usp) -{ - regs->pc = pc; - regs->gpr[GPR_SP] = usp; - regs->kernel_mode = 0; -} - -/* Free all resources held by a thread. */ -static inline void release_thread (struct task_struct *dead_task) -{ -} - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern int kernel_thread (int (*fn)(void *), void * arg, unsigned long flags); - -/* Free current thread data structures etc. */ -static inline void exit_thread (void) -{ -} - - -/* Return the registers saved during context-switch by the currently - not-running thread T. Note that this only includes some registers! - See entry.S for details. */ -#define thread_saved_regs(t) \ - ((struct pt_regs*)((t)->thread.ksp + STATE_SAVE_PT_OFFSET)) -/* Return saved (kernel) PC of a blocked thread. Actually, we return the - LP register, because the thread is actually blocked in switch_thread, - and we're interested in the PC it will _return_ to. */ -#define thread_saved_pc(t) (thread_saved_regs(t)->gpr[GPR_LP]) - - -unsigned long get_wchan (struct task_struct *p); - - -/* Return some info about the user process TASK. */ -#define task_tos(task) ((unsigned long)task_stack_page(task) + THREAD_SIZE) -#define task_pt_regs(task) ((struct pt_regs *)task_tos (task) - 1) -#define task_sp(task) (task_pt_regs (task)->gpr[GPR_SP]) -#define task_pc(task) (task_pt_regs (task)->pc) -/* Grotty old names for some. */ -#define KSTK_EIP(task) task_pc (task) -#define KSTK_ESP(task) task_sp (task) - - -#define cpu_relax() barrier() - - -#else /* __ASSEMBLY__ */ - -#define THREAD_KSP 0 - -#endif /* !__ASSEMBLY__ */ - - -#endif /* __V850_PROCESSOR_H__ */ diff --git a/include/asm-v850/ptrace.h b/include/asm-v850/ptrace.h deleted file mode 100644 index 4f35cf2cd64..00000000000 --- a/include/asm-v850/ptrace.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * include/asm-v850/ptrace.h -- Access to CPU registers - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_PTRACE_H__ -#define __V850_PTRACE_H__ - - -/* v850 general purpose registers with special meanings. */ -#define GPR_ZERO 0 /* constant zero */ -#define GPR_ASM 1 /* reserved for assembler */ -#define GPR_SP 3 /* stack pointer */ -#define GPR_GP 4 /* global data pointer */ -#define GPR_TP 5 /* `text pointer' */ -#define GPR_EP 30 /* `element pointer' */ -#define GPR_LP 31 /* link pointer (current return address) */ - -/* These aren't official names, but they make some code more descriptive. */ -#define GPR_ARG0 6 -#define GPR_ARG1 7 -#define GPR_ARG2 8 -#define GPR_ARG3 9 -#define GPR_RVAL0 10 -#define GPR_RVAL1 11 -#define GPR_RVAL GPR_RVAL0 - -#define NUM_GPRS 32 - -/* v850 `system' registers. */ -#define SR_EIPC 0 -#define SR_EIPSW 1 -#define SR_FEPC 2 -#define SR_FEPSW 3 -#define SR_ECR 4 -#define SR_PSW 5 -#define SR_CTPC 16 -#define SR_CTPSW 17 -#define SR_DBPC 18 -#define SR_DBPSW 19 -#define SR_CTBP 20 -#define SR_DIR 21 -#define SR_ASID 23 - - -#ifndef __ASSEMBLY__ - -typedef unsigned long v850_reg_t; - -/* How processor state is stored on the stack during a syscall/signal. - If you change this structure, change the associated assembly-language - macros below too (PT_*)! */ -struct pt_regs -{ - /* General purpose registers. */ - v850_reg_t gpr[NUM_GPRS]; - - v850_reg_t pc; /* program counter */ - v850_reg_t psw; /* program status word */ - - /* Registers used by `callt' instruction: */ - v850_reg_t ctpc; /* saved program counter */ - v850_reg_t ctpsw; /* saved psw */ - v850_reg_t ctbp; /* base pointer for callt table */ - - char kernel_mode; /* 1 if in `kernel mode', 0 if user mode */ -}; - - -#define instruction_pointer(regs) ((regs)->pc) -#define profile_pc(regs) instruction_pointer(regs) -#define user_mode(regs) (!(regs)->kernel_mode) - -/* When a struct pt_regs is used to save user state for a system call in - the kernel, the system call is stored in the space for R0 (since it's - never used otherwise, R0 being a constant 0). Non-system-calls - simply store 0 there. */ -#define PT_REGS_SYSCALL(regs) (regs)->gpr[0] -#define PT_REGS_SET_SYSCALL(regs, val) ((regs)->gpr[0] = (val)) - -#endif /* !__ASSEMBLY__ */ - - -/* The number of bytes used to store each register. */ -#define _PT_REG_SIZE 4 - -/* Offset of a general purpose register in a struct pt_regs. */ -#define PT_GPR(num) ((num) * _PT_REG_SIZE) - -/* Offsets of various special registers & fields in a struct pt_regs. */ -#define PT_PC ((NUM_GPRS + 0) * _PT_REG_SIZE) -#define PT_PSW ((NUM_GPRS + 1) * _PT_REG_SIZE) -#define PT_CTPC ((NUM_GPRS + 2) * _PT_REG_SIZE) -#define PT_CTPSW ((NUM_GPRS + 3) * _PT_REG_SIZE) -#define PT_CTBP ((NUM_GPRS + 4) * _PT_REG_SIZE) -#define PT_KERNEL_MODE ((NUM_GPRS + 5) * _PT_REG_SIZE) - -/* Where the current syscall number is stashed; obviously only valid in - the kernel! */ -#define PT_CUR_SYSCALL PT_GPR(0) - -/* Size of struct pt_regs, including alignment. */ -#define PT_SIZE ((NUM_GPRS + 6) * _PT_REG_SIZE) - - -/* These are `magic' values for PTRACE_PEEKUSR that return info about where - a process is located in memory. */ -#define PT_TEXT_ADDR (PT_SIZE + 1) -#define PT_TEXT_LEN (PT_SIZE + 2) -#define PT_DATA_ADDR (PT_SIZE + 3) - - -#endif /* __V850_PTRACE_H__ */ diff --git a/include/asm-v850/resource.h b/include/asm-v850/resource.h deleted file mode 100644 index 4b9dcd44f8d..00000000000 --- a/include/asm-v850/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __V850_RESOURCE_H__ -#define __V850_RESOURCE_H__ - -#include <asm-generic/resource.h> - -#endif /* __V850_RESOURCE_H__ */ diff --git a/include/asm-v850/rte_cb.h b/include/asm-v850/rte_cb.h deleted file mode 100644 index db9879f00aa..00000000000 --- a/include/asm-v850/rte_cb.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * include/asm-v850/rte_cb.h -- Midas labs RTE-CB series of evaluation boards - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_RTE_CB_H__ -#define __V850_RTE_CB_H__ - - -/* The SRAM on the Mother-A motherboard. */ -#define MB_A_SRAM_ADDR GCS0_ADDR -#define MB_A_SRAM_SIZE 0x00200000 /* 2MB */ - - -#ifdef CONFIG_RTE_GBUS_INT -/* GBUS interrupt support. */ - -# include <asm/gbus_int.h> - -# define GBUS_INT_BASE_IRQ NUM_RTE_CB_IRQS -# define GBUS_INT_BASE_ADDR (GCS2_ADDR + 0x00006000) - -/* Some specific interrupts. */ -# define IRQ_MB_A_LAN IRQ_GBUS_INT(10) -# define IRQ_MB_A_PCI1(n) (IRQ_GBUS_INT(16) + (n)) -# define IRQ_MB_A_PCI1_NUM 4 -# define IRQ_MB_A_PCI2(n) (IRQ_GBUS_INT(20) + (n)) -# define IRQ_MB_A_PCI2_NUM 4 -# define IRQ_MB_A_EXT(n) (IRQ_GBUS_INT(24) + (n)) -# define IRQ_MB_A_EXT_NUM 4 -# define IRQ_MB_A_USB_OC(n) (IRQ_GBUS_INT(28) + (n)) -# define IRQ_MB_A_USB_OC_NUM 2 -# define IRQ_MB_A_PCMCIA_OC IRQ_GBUS_INT(30) - -/* We define NUM_MACH_IRQS to include extra interrupts from the GBUS. */ -# define NUM_MACH_IRQS (NUM_RTE_CB_IRQS + IRQ_GBUS_INT_NUM) - -#else /* !CONFIG_RTE_GBUS_INT */ - -# define NUM_MACH_IRQS NUM_RTE_CB_IRQS - -#endif /* CONFIG_RTE_GBUS_INT */ - - -#ifdef CONFIG_RTE_MB_A_PCI -/* Mother-A PCI bus support. */ - -# include <asm/rte_mb_a_pci.h> - -/* These are the base addresses used for allocating device address - space. 512K of the motherboard SRAM is in the same space, so we have - to be careful not to let it be allocated. */ -# define PCIBIOS_MIN_MEM (MB_A_PCI_MEM_ADDR + 0x80000) -# define PCIBIOS_MIN_IO MB_A_PCI_IO_ADDR - -/* As we don't really support PCI DMA to cpu memory, and use bounce-buffers - instead, perversely enough, this becomes always true! */ -# define pci_dma_supported(dev, mask) 1 -# define pcibios_assign_all_busses() 1 - -#endif /* CONFIG_RTE_MB_A_PCI */ - - -#ifndef __ASSEMBLY__ -extern void rte_cb_early_init (void); -extern void rte_cb_init_irqs (void); -#endif /* !__ASSEMBLY__ */ - - -#endif /* __V850_RTE_CB_H__ */ diff --git a/include/asm-v850/rte_ma1_cb.h b/include/asm-v850/rte_ma1_cb.h deleted file mode 100644 index bd3162ab984..00000000000 --- a/include/asm-v850/rte_ma1_cb.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * include/asm-v850/rte_ma1_cb.h -- Midas labs RTE-V850/MA1-CB board - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_RTE_MA1_CB_H__ -#define __V850_RTE_MA1_CB_H__ - -#include <asm/rte_cb.h> /* Common defs for Midas RTE-CB boards. */ - - -#define PLATFORM "rte-v850e/ma1-cb" -#define PLATFORM_LONG "Midas lab RTE-V850E/MA1-CB" - -#define CPU_CLOCK_FREQ 50000000 /* 50MHz */ - -/* 1MB of onboard SRAM. Note that the monitor ROM uses parts of this - for its own purposes, so care must be taken. Some address lines are - not decoded, so the SRAM area is mirrored every 1MB from 0x400000 to - 0x800000 (exclusive). */ -#define SRAM_ADDR 0x00400000 -#define SRAM_SIZE 0x00100000 /* 1MB */ - -/* 32MB of onbard SDRAM. */ -#define SDRAM_ADDR 0x00800000 -#define SDRAM_SIZE 0x02000000 /* 32MB */ - - -/* CPU addresses of GBUS memory spaces. */ -#define GCS0_ADDR 0x05000000 /* GCS0 - Common SRAM (2MB) */ -#define GCS0_SIZE 0x00200000 /* 2MB */ -#define GCS1_ADDR 0x06000000 /* GCS1 - Flash ROM (8MB) */ -#define GCS1_SIZE 0x00800000 /* 8MB */ -#define GCS2_ADDR 0x07900000 /* GCS2 - I/O registers */ -#define GCS2_SIZE 0x00400000 /* 4MB */ -#define GCS5_ADDR 0x04000000 /* GCS5 - PCI bus space */ -#define GCS5_SIZE 0x01000000 /* 16MB */ -#define GCS6_ADDR 0x07980000 /* GCS6 - PCI control registers */ -#define GCS6_SIZE 0x00000200 /* 512B */ - - -/* For <asm/page.h> */ -#define PAGE_OFFSET SRAM_ADDR - - -/* The GBUS GINT0 - GINT3 interrupts are connected to the INTP000 - INTP011 - pins on the CPU. These are shared among the GBUS interrupts. */ -#define IRQ_GINT(n) IRQ_INTP(n) -#define IRQ_GINT_NUM 4 - -/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS. */ -#define NUM_RTE_CB_IRQS NUM_CPU_IRQS - - -#ifdef CONFIG_ROM_KERNEL -/* Kernel is in ROM, starting at address 0. */ - -#define INTV_BASE 0 - -#else /* !CONFIG_ROM_KERNEL */ - -#ifdef CONFIG_RTE_CB_MULTI -/* Using RAM kernel with ROM monitor for Multi debugger. */ - -/* The chip's real interrupt vectors are in ROM, but they jump to a - secondary interrupt vector table in RAM. */ -#define INTV_BASE 0x004F8000 - -/* Scratch memory used by the ROM monitor, which shouldn't be used by - linux (except for the alternate interrupt vector area, defined - above). */ -#define MON_SCRATCH_ADDR 0x004F8000 -#define MON_SCRATCH_SIZE 0x00008000 /* 32KB */ - -#else /* !CONFIG_RTE_CB_MULTI */ -/* Using RAM-kernel. Assume some sort of boot-loader got us loaded at - address 0. */ - -#define INTV_BASE 0 - -#endif /* CONFIG_RTE_CB_MULTI */ - -#endif /* CONFIG_ROM_KERNEL */ - - -/* Some misc. on-board devices. */ - -/* Seven-segment LED display (two digits). Write-only. */ -#define LED_ADDR(n) (0x07802000 + (n)) -#define LED(n) (*(volatile unsigned char *)LED_ADDR(n)) -#define LED_NUM_DIGITS 2 - - -/* Override the basic MA uart pre-initialization so that we can - initialize extra stuff. */ -#undef V850E_UART_PRE_CONFIGURE /* should be defined by <asm/ma.h> */ -#define V850E_UART_PRE_CONFIGURE rte_ma1_cb_uart_pre_configure -#ifndef __ASSEMBLY__ -extern void rte_ma1_cb_uart_pre_configure (unsigned chan, - unsigned cflags, unsigned baud); -#endif - -/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */ - -/* CTS for UART channel 0 is pin P43 (bit 3 of port 4). */ -#define V850E_UART_CTS(chan) ((chan) == 0 ? !(MA_PORT4_IO & 0x8) : 1) -/* RTS for UART channel 0 is pin P42 (bit 2 of port 4). */ -#define V850E_UART_SET_RTS(chan, val) \ - do { \ - if (chan == 0) { \ - unsigned old = MA_PORT4_IO; \ - if (val) \ - MA_PORT4_IO = old & ~0x4; \ - else \ - MA_PORT4_IO = old | 0x4; \ - } \ - } while (0) - - -#endif /* __V850_RTE_MA1_CB_H__ */ diff --git a/include/asm-v850/rte_mb_a_pci.h b/include/asm-v850/rte_mb_a_pci.h deleted file mode 100644 index 41ac185ca9c..00000000000 --- a/include/asm-v850/rte_mb_a_pci.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * include/asm-v850/mb_a_pci.h -- PCI support for Midas lab RTE-MOTHER-A board - * - * Copyright (C) 2001 NEC Corporation - * Copyright (C) 2001 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_MB_A_PCI_H__ -#define __V850_MB_A_PCI_H__ - - -#define MB_A_PCI_MEM_ADDR GCS5_ADDR -#define MB_A_PCI_MEM_SIZE (GCS5_SIZE / 2) -#define MB_A_PCI_IO_ADDR (GCS5_ADDR + MB_A_PCI_MEM_SIZE) -#define MB_A_PCI_IO_SIZE (GCS5_SIZE / 2) -#define MB_A_PCI_REG_BASE_ADDR GCS6_ADDR - -#define MB_A_PCI_PCICR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x4) -#define MB_A_PCI_PCICR (*(volatile u16 *)MB_A_PCI_PCICR_ADDR) -#define MB_A_PCI_PCISR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x6) -#define MB_A_PCI_PCISR (*(volatile u16 *)MB_A_PCI_PCISR_ADDR) -#define MB_A_PCI_PCILTR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xD) -#define MB_A_PCI_PCILTR (*(volatile u8 *)MB_A_PCI_PCILTR_ADDR) -#define MB_A_PCI_PCIBAR0_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x10) -#define MB_A_PCI_PCIBAR0 (*(volatile u32 *)MB_A_PCI_PCIBAR0_ADDR) -#define MB_A_PCI_PCIBAR1_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x14) -#define MB_A_PCI_PCIBAR1 (*(volatile u32 *)MB_A_PCI_PCIBAR1_ADDR) -#define MB_A_PCI_PCIBAR2_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x18) -#define MB_A_PCI_PCIBAR2 (*(volatile u32 *)MB_A_PCI_PCIBAR2_ADDR) -#define MB_A_PCI_VENDOR_ID_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x2C) -#define MB_A_PCI_VENDOR_ID (*(volatile u16 *)MB_A_PCI_VENDOR_ID_ADDR) -#define MB_A_PCI_DEVICE_ID_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x2E) -#define MB_A_PCI_DEVICE_ID (*(volatile u16 *)MB_A_PCI_DEVICE_ID_ADDR) -#define MB_A_PCI_DMRR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x9C) -#define MB_A_PCI_DMRR (*(volatile u32 *)MB_A_PCI_DMRR_ADDR) -#define MB_A_PCI_DMLBAM_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xA0) -#define MB_A_PCI_DMLBAM (*(volatile u32 *)MB_A_PCI_DMLBAM_ADDR) -#define MB_A_PCI_DMLBAI_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xA4) -#define MB_A_PCI_DMLBAI (*(volatile u32 *)MB_A_PCI_DMLBAI_ADDR) -#define MB_A_PCI_PCIPBAM_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xA8) -#define MB_A_PCI_PCIPBAM (*(volatile u32 *)MB_A_PCI_PCIPBAM_ADDR) -/* `PCI Configuration Address Register for Direct Master to PCI IO/CFG' */ -#define MB_A_PCI_DMCFGA_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xAC) -#define MB_A_PCI_DMCFGA (*(volatile u32 *)MB_A_PCI_DMCFGA_ADDR) -/* `PCI Permanent Configuration ID Register' */ -#define MB_A_PCI_PCIHIDR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xF0) -#define MB_A_PCI_PCIHIDR (*(volatile u32 *)MB_A_PCI_PCIHIDR_ADDR) - - -#endif /* __V850_MB_A_PCI_H__ */ diff --git a/include/asm-v850/rte_me2_cb.h b/include/asm-v850/rte_me2_cb.h deleted file mode 100644 index 9922c85c85a..00000000000 --- a/include/asm-v850/rte_me2_cb.h +++ /dev/null @@ -1,202 +0,0 @@ -/* - * include/asm-v850/rte_me2_cb.h -- Midas labs RTE-V850E/ME2-CB board - * - * Copyright (C) 2001,02,03 NEC Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_RTE_ME2_CB_H__ -#define __V850_RTE_ME2_CB_H__ - -#include <asm/rte_cb.h> /* Common defs for Midas RTE-CB boards. */ - - -#define PLATFORM "rte-v850e/me2-cb" -#define PLATFORM_LONG "Midas lab RTE-V850E/ME2-CB" - -#define CPU_CLOCK_FREQ 150000000 /* 150MHz */ -#define FIXED_BOGOMIPS 50 - -/* 32MB of onbard SDRAM. */ -#define SDRAM_ADDR 0x00800000 -#define SDRAM_SIZE 0x02000000 /* 32MB */ - - -/* CPU addresses of GBUS memory spaces. */ -#define GCS0_ADDR 0x04000000 /* GCS0 - Common SRAM (2MB) */ -#define GCS0_SIZE 0x00800000 /* 8MB */ -#define GCS1_ADDR 0x04800000 /* GCS1 - Flash ROM (8MB) */ -#define GCS1_SIZE 0x00800000 /* 8MB */ -#define GCS2_ADDR 0x07000000 /* GCS2 - I/O registers */ -#define GCS2_SIZE 0x00800000 /* 8MB */ -#define GCS5_ADDR 0x08000000 /* GCS5 - PCI bus space */ -#define GCS5_SIZE 0x02000000 /* 32MB */ -#define GCS6_ADDR 0x07800000 /* GCS6 - PCI control registers */ -#define GCS6_SIZE 0x00800000 /* 8MB */ - - -/* For <asm/page.h> */ -#define PAGE_OFFSET SDRAM_ADDR - - -#ifdef CONFIG_ROM_KERNEL -/* Kernel is in ROM, starting at address 0. */ - -#define INTV_BASE 0 -#define ROOT_FS_IMAGE_RW 0 - -#else /* !CONFIG_ROM_KERNEL */ -/* Using RAM-kernel. Assume some sort of boot-loader got us loaded at - address 0. */ - -#define INTV_BASE 0 -#define ROOT_FS_IMAGE_RW 1 - -#endif /* CONFIG_ROM_KERNEL */ - - -/* Some misc. on-board devices. */ - -/* Seven-segment LED display (four digits). */ -#define LED_ADDR(n) (0x0FE02000 + (n)) -#define LED(n) (*(volatile unsigned char *)LED_ADDR(n)) -#define LED_NUM_DIGITS 4 - - -/* On-board PIC. */ - -#define CB_PIC_BASE_ADDR 0x0FE04000 - -#define CB_PIC_INT0M_ADDR (CB_PIC_BASE_ADDR + 0x00) -#define CB_PIC_INT0M (*(volatile u16 *)CB_PIC_INT0M_ADDR) -#define CB_PIC_INT1M_ADDR (CB_PIC_BASE_ADDR + 0x10) -#define CB_PIC_INT1M (*(volatile u16 *)CB_PIC_INT1M_ADDR) -#define CB_PIC_INTR_ADDR (CB_PIC_BASE_ADDR + 0x20) -#define CB_PIC_INTR (*(volatile u16 *)CB_PIC_INTR_ADDR) -#define CB_PIC_INTEN_ADDR (CB_PIC_BASE_ADDR + 0x30) -#define CB_PIC_INTEN (*(volatile u16 *)CB_PIC_INTEN_ADDR) - -#define CB_PIC_INT0EN 0x0001 -#define CB_PIC_INT1EN 0x0002 -#define CB_PIC_INT0SEL 0x0080 - -/* The PIC interrupts themselves. */ -#define CB_PIC_BASE_IRQ NUM_CPU_IRQS -#define IRQ_CB_PIC_NUM 10 - -/* Some specific CB_PIC interrupts. */ -#define IRQ_CB_EXTTM0 (CB_PIC_BASE_IRQ + 0) -#define IRQ_CB_EXTSIO (CB_PIC_BASE_IRQ + 1) -#define IRQ_CB_TOVER (CB_PIC_BASE_IRQ + 2) -#define IRQ_CB_GINT0 (CB_PIC_BASE_IRQ + 3) -#define IRQ_CB_USB (CB_PIC_BASE_IRQ + 4) -#define IRQ_CB_LANC (CB_PIC_BASE_IRQ + 5) -#define IRQ_CB_USB_VBUS_ON (CB_PIC_BASE_IRQ + 6) -#define IRQ_CB_USB_VBUS_OFF (CB_PIC_BASE_IRQ + 7) -#define IRQ_CB_EXTTM1 (CB_PIC_BASE_IRQ + 8) -#define IRQ_CB_EXTTM2 (CB_PIC_BASE_IRQ + 9) - -/* The GBUS GINT1 - GINT3 (note, not GINT0!) interrupts are connected to - the INTP65 - INTP67 pins on the CPU. These are shared among the GBUS - interrupts. */ -#define IRQ_GINT(n) IRQ_INTP((n) + 9) /* 0 is unused! */ -#define IRQ_GINT_NUM 4 /* 0 is unused! */ - -/* The shared interrupt line from the PIC is connected to CPU pin INTP23. */ -#define IRQ_CB_PIC IRQ_INTP(4) /* P23 */ - -/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS. */ -#define NUM_RTE_CB_IRQS (NUM_CPU_IRQS + IRQ_CB_PIC_NUM) - - -#ifndef __ASSEMBLY__ -struct cb_pic_irq_init { - const char *name; /* name of interrupt type */ - - /* Range of kernel irq numbers for this type: - BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM */ - unsigned base, num, interval; - - unsigned priority; /* interrupt priority to assign */ -}; -struct hw_interrupt_type; /* fwd decl */ - -/* Enable interrupt handling for interrupt IRQ. */ -extern void cb_pic_enable_irq (unsigned irq); -/* Disable interrupt handling for interrupt IRQ. Note that any interrupts - received while disabled will be delivered once the interrupt is enabled - again, unless they are explicitly cleared using `cb_pic_clear_pending_irq'. */ -extern void cb_pic_disable_irq (unsigned irq); -/* Initialize HW_IRQ_TYPES for PIC irqs described in array INITS (which is - terminated by an entry with the name field == 0). */ -extern void cb_pic_init_irq_types (struct cb_pic_irq_init *inits, - struct hw_interrupt_type *hw_irq_types); -/* Initialize PIC interrupts. */ -extern void cb_pic_init_irqs (void); -#endif /* __ASSEMBLY__ */ - - -/* TL16C550C on board UART see also asm/serial.h */ -#define CB_UART_BASE 0x0FE08000 -#define CB_UART_REG_GAP 0x10 -#define CB_UART_CLOCK 0x16000000 - -/* CompactFlash setting */ -#define CB_CF_BASE 0x0FE0C000 -#define CB_CF_CCR_ADDR (CB_CF_BASE+0x200) -#define CB_CF_CCR (*(volatile u8 *)CB_CF_CCR_ADDR) -#define CB_CF_REG0_ADDR (CB_CF_BASE+0x1000) -#define CB_CF_REG0 (*(volatile u16 *)CB_CF_REG0_ADDR) -#define CB_CF_STS0_ADDR (CB_CF_BASE+0x1004) -#define CB_CF_STS0 (*(volatile u16 *)CB_CF_STS0_ADDR) -#define CB_PCATA_BASE (CB_CF_BASE+0x800) -#define CB_IDE_BASE (CB_CF_BASE+0x9F0) -#define CB_IDE_CTRL (CB_CF_BASE+0xBF6) -#define CB_IDE_REG_OFFS 0x1 - - -/* SMSC LAN91C111 setting */ -#if defined(CONFIG_SMC91111) -#define CB_LANC_BASE 0x0FE10300 -#define CONFIG_SMC16BITONLY -#define ETH0_ADDR CB_LANC_BASE -#define ETH0_IRQ IRQ_CB_LANC -#endif /* CONFIG_SMC16BITONLY */ - - -#undef V850E_UART_PRE_CONFIGURE -#define V850E_UART_PRE_CONFIGURE rte_me2_cb_uart_pre_configure -#ifndef __ASSEMBLY__ -extern void rte_me2_cb_uart_pre_configure (unsigned chan, - unsigned cflags, unsigned baud); -#endif /* __ASSEMBLY__ */ - -/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */ - -/* CTS for UART channel 0 is pin P22 (bit 2 of port 2). */ -#define V850E_UART_CTS(chan) ((chan) == 0 ? !(ME2_PORT2_IO & 0x4) : 1) -/* RTS for UART channel 0 is pin P21 (bit 1 of port 2). */ -#define V850E_UART_SET_RTS(chan, val) \ - do { \ - if (chan == 0) { \ - unsigned old = ME2_PORT2_IO; \ - if (val) \ - ME2_PORT2_IO = old & ~0x2; \ - else \ - ME2_PORT2_IO = old | 0x2; \ - } \ - } while (0) - - -#ifndef __ASSEMBLY__ -extern void rte_me2_cb_init_irqs (void); -#endif /* !__ASSEMBLY__ */ - - -#endif /* __V850_RTE_ME2_CB_H__ */ diff --git a/include/asm-v850/rte_nb85e_cb.h b/include/asm-v850/rte_nb85e_cb.h deleted file mode 100644 index f56591cad90..00000000000 --- a/include/asm-v850/rte_nb85e_cb.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * include/asm-v850/rte_nb85e_cb.h -- Midas labs RTE-V850/NB85E-CB board - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_RTE_NB85E_CB_H__ -#define __V850_RTE_NB85E_CB_H__ - -#include <asm/rte_cb.h> /* Common defs for Midas RTE-CB boards. */ - - -#define PLATFORM "rte-v850e/nb85e-cb" -#define PLATFORM_LONG "Midas lab RTE-V850E/NB85E-CB" - -#define CPU_CLOCK_FREQ 50000000 /* 50MHz */ - -/* 1MB of onboard SRAM. Note that the monitor ROM uses parts of this - for its own purposes, so care must be taken. */ -#define SRAM_ADDR 0x03C00000 -#define SRAM_SIZE 0x00100000 /* 1MB */ - -/* 16MB of onbard SDRAM. */ -#define SDRAM_ADDR 0x01000000 -#define SDRAM_SIZE 0x01000000 /* 16MB */ - - -/* CPU addresses of GBUS memory spaces. */ -#define GCS0_ADDR 0x00400000 /* GCS0 - Common SRAM (2MB) */ -#define GCS0_SIZE 0x00400000 /* 4MB */ -#define GCS1_ADDR 0x02000000 /* GCS1 - Flash ROM (8MB) */ -#define GCS1_SIZE 0x00800000 /* 8MB */ -#define GCS2_ADDR 0x03900000 /* GCS2 - I/O registers */ -#define GCS2_SIZE 0x00080000 /* 512KB */ -#define GCS3_ADDR 0x02800000 /* GCS3 - EXT-bus: memory space */ -#define GCS3_SIZE 0x00800000 /* 8MB */ -#define GCS4_ADDR 0x03A00000 /* GCS4 - EXT-bus: I/O space */ -#define GCS4_SIZE 0x00200000 /* 2MB */ -#define GCS5_ADDR 0x00800000 /* GCS5 - PCI bus space */ -#define GCS5_SIZE 0x00800000 /* 8MB */ -#define GCS6_ADDR 0x03980000 /* GCS6 - PCI control registers */ -#define GCS6_SIZE 0x00010000 /* 64KB */ - - -/* The GBUS GINT0 - GINT3 interrupts are connected to CPU interrupts 10-12. - These are shared among the GBUS interrupts. */ -#define IRQ_GINT(n) (10 + (n)) -#define IRQ_GINT_NUM 3 - -/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS. */ -#define NUM_RTE_CB_IRQS NUM_CPU_IRQS - - -#ifdef CONFIG_ROM_KERNEL -/* Kernel is in ROM, starting at address 0. */ - -#define INTV_BASE 0 - -#else /* !CONFIG_ROM_KERNEL */ -/* We're using the ROM monitor. */ - -/* The chip's real interrupt vectors are in ROM, but they jump to a - secondary interrupt vector table in RAM. */ -#define INTV_BASE 0x03CF8000 - -/* Scratch memory used by the ROM monitor, which shouldn't be used by - linux (except for the alternate interrupt vector area, defined - above). */ -#define MON_SCRATCH_ADDR 0x03CE8000 -#define MON_SCRATCH_SIZE 0x00018000 /* 96KB */ - -#endif /* CONFIG_ROM_KERNEL */ - - -/* Some misc. on-board devices. */ - -/* Seven-segment LED display (two digits). Write-only. */ -#define LED_ADDR(n) (0x03802000 + (n)) -#define LED(n) (*(volatile unsigned char *)LED_ADDR(n)) -#define LED_NUM_DIGITS 4 - - -/* Override the basic TEG UART pre-initialization so that we can - initialize extra stuff. */ -#undef V850E_UART_PRE_CONFIGURE /* should be defined by <asm/teg.h> */ -#define V850E_UART_PRE_CONFIGURE rte_nb85e_cb_uart_pre_configure -#ifndef __ASSEMBLY__ -extern void rte_nb85e_cb_uart_pre_configure (unsigned chan, - unsigned cflags, unsigned baud); -#endif - -/* This board supports RTS/CTS for the on-chip UART. */ - -/* CTS is pin P00. */ -#define V850E_UART_CTS(chan) (! (TEG_PORT0_IO & 0x1)) -/* RTS is pin P02. */ -#define V850E_UART_SET_RTS(chan, val) \ - do { \ - unsigned old = TEG_PORT0_IO; \ - TEG_PORT0_IO = val ? (old & ~0x4) : (old | 0x4); \ - } while (0) - - -#endif /* __V850_RTE_NB85E_CB_H__ */ diff --git a/include/asm-v850/scatterlist.h b/include/asm-v850/scatterlist.h deleted file mode 100644 index 02d27b3fb06..00000000000 --- a/include/asm-v850/scatterlist.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * include/asm-v850/scatterlist.h - * - * Copyright (C) 2001,02 NEC Corporation - * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_SCATTERLIST_H__ -#define __V850_SCATTERLIST_H__ - -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned offset; - dma_addr_t dma_address; - unsigned length; -}; - -#define ISA_DMA_THRESHOLD (~0UL) - -#endif /* __V850_SCATTERLIST_H__ */ diff --git a/include/asm-v850/sections.h b/include/asm-v850/sections.h deleted file mode 100644 index e0238253a0d..00000000000 --- a/include/asm-v850/sections.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __V850_SECTIONS_H__ -#define __V850_SECTIONS_H__ - -#include <asm-generic/sections.h> - -#endif /* __V850_SECTIONS_H__ */ diff --git a/include/asm-v850/segment.h b/include/asm-v850/segment.h deleted file mode 100644 index 5e2b15dcf3d..00000000000 --- a/include/asm-v850/segment.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef __V850_SEGMENT_H__ -#define __V850_SEGMENT_H__ - - -#ifndef __ASSEMBLY__ - -typedef unsigned long mm_segment_t; /* domain register */ - -#endif /* !__ASSEMBLY__ */ - - -#define __KERNEL_CS 0x0 -#define __KERNEL_DS 0x0 - -#define __USER_CS 0x1 -#define __USER_DS 0x1 - -#define KERNEL_DS __KERNEL_DS -#define KERNEL_CS __KERNEL_CS -#define USER_DS __USER_DS -#define USER_CS __USER_CS - -#define segment_eq(a,b) ((a) == (b)) - -#define get_ds() (KERNEL_DS) -#define get_fs() (USER_DS) - -#define set_fs(seg) ((void)(seg)) - - -#define copy_segments(task, mm) ((void)((void)(task), (mm))) -#define release_segments(mm) ((void)(mm)) -#define forget_segments() ((void)0) - - -#endif /* __V850_SEGMENT_H__ */ diff --git a/include/asm-v850/semaphore.h b/include/asm-v850/semaphore.h deleted file mode 100644 index d9b2034ed1d..00000000000 --- a/include/asm-v850/semaphore.h +++ /dev/null @@ -1 +0,0 @@ -#include <linux/semaphore.h> diff --git a/include/asm-v850/sembuf.h b/include/asm-v850/sembuf.h deleted file mode 100644 index 1622231a8b8..00000000000 --- a/include/asm-v850/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef __V850_SEMBUF_H__ -#define __V850_SEMBUF_H__ - -/* - * The semid64_ds structure for v850 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __V850_SEMBUF_H__ */ diff --git a/include/asm-v850/serial.h b/include/asm-v850/serial.h deleted file mode 100644 index 36d8f4cbbf3..00000000000 --- a/include/asm-v850/serial.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ - -#ifdef CONFIG_RTE_CB_ME2 - -#include <asm/rte_me2_cb.h> - -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -#define irq_cannonicalize(x) (x) -#define BASE_BAUD 250000 /* (16MHz / (16 * 38400)) * 9600 */ -#define SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, CB_UART_BASE, IRQ_CB_EXTSIO, STD_COM_FLAGS }, - -/* Redefine UART register offsets. */ -#undef UART_RX -#undef UART_TX -#undef UART_DLL -#undef UART_TRG -#undef UART_DLM -#undef UART_IER -#undef UART_FCTR -#undef UART_IIR -#undef UART_FCR -#undef UART_EFR -#undef UART_LCR -#undef UART_MCR -#undef UART_LSR -#undef UART_MSR -#undef UART_SCR -#undef UART_EMSR - -#define UART_RX (0 * CB_UART_REG_GAP) -#define UART_TX (0 * CB_UART_REG_GAP) -#define UART_DLL (0 * CB_UART_REG_GAP) -#define UART_TRG (0 * CB_UART_REG_GAP) -#define UART_DLM (1 * CB_UART_REG_GAP) -#define UART_IER (1 * CB_UART_REG_GAP) -#define UART_FCTR (1 * CB_UART_REG_GAP) -#define UART_IIR (2 * CB_UART_REG_GAP) -#define UART_FCR (2 * CB_UART_REG_GAP) -#define UART_EFR (2 * CB_UART_REG_GAP) -#define UART_LCR (3 * CB_UART_REG_GAP) -#define UART_MCR (4 * CB_UART_REG_GAP) -#define UART_LSR (5 * CB_UART_REG_GAP) -#define UART_MSR (6 * CB_UART_REG_GAP) -#define UART_SCR (7 * CB_UART_REG_GAP) -#define UART_EMSR (7 * CB_UART_REG_GAP) - -#endif /* CONFIG_RTE_CB_ME2 */ diff --git a/include/asm-v850/setup.h b/include/asm-v850/setup.h deleted file mode 100644 index c48a9b97d05..00000000000 --- a/include/asm-v850/setup.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _V850_SETUP_H -#define _V850_SETUP_H - -#define COMMAND_LINE_SIZE 512 - -#endif /* __SETUP_H */ diff --git a/include/asm-v850/shmbuf.h b/include/asm-v850/shmbuf.h deleted file mode 100644 index 3d085c9c418..00000000000 --- a/include/asm-v850/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef __V850_SHMBUF_H__ -#define __V850_SHMBUF_H__ - -/* - * The shmid64_ds structure for v850 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* __V850_SHMBUF_H__ */ diff --git a/include/asm-v850/shmparam.h b/include/asm-v850/shmparam.h deleted file mode 100644 index 7dcb6739073..00000000000 --- a/include/asm-v850/shmparam.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __V850_SHMPARAM_H__ -#define __V850_SHMPARAM_H__ - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* __V850_SHMPARAM_H__ */ diff --git a/include/asm-v850/sigcontext.h b/include/asm-v850/sigcontext.h deleted file mode 100644 index e0890f6f4bc..00000000000 --- a/include/asm-v850/sigcontext.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-v850/sigcontext.h -- Signal contexts - * - * Copyright (C) 2001 NEC Corporation - * Copyright (C) 2001 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_SIGCONTEXT_H__ -#define __V850_SIGCONTEXT_H__ - -#include <asm/ptrace.h> - -struct sigcontext -{ - struct pt_regs regs; - unsigned long oldmask; -}; - -#endif /* __V850_SIGCONTEXT_H__ */ diff --git a/include/asm-v850/siginfo.h b/include/asm-v850/siginfo.h deleted file mode 100644 index 7eb94703dce..00000000000 --- a/include/asm-v850/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __V850_SIGINFO_H__ -#define __V850_SIGINFO_H__ - -#include <asm-generic/siginfo.h> - -#endif /* __V850_SIGINFO_H__ */ diff --git a/include/asm-v850/signal.h b/include/asm-v850/signal.h deleted file mode 100644 index a38df0834bb..00000000000 --- a/include/asm-v850/signal.h +++ /dev/null @@ -1,168 +0,0 @@ -#ifndef __V850_SIGNAL_H__ -#define __V850_SIGNAL_H__ - -#include <linux/types.h> - -/* Avoid too many header ordering problems. */ -struct siginfo; - - -#ifdef __KERNEL__ - -/* Most things should be clean enough to redefine this at will, if care - is taken to make libc match. */ -#define _NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (_NSIG / _NSIG_BPW) - -typedef unsigned long old_sigset_t; /* at least 32 bits */ - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} sigset_t; - -#else /* !__KERNEL__ */ - -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -/* - * SA_FLAGS values: - * - * SA_ONSTACK indicates that a registered stack_t will be used. - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_RESETHAND clears the handler when the signal is delivered. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_NODEFER prevents the current signal from being masked in the handler. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - -#define SA_RESTORER 0x04000000 - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include <asm-generic/signal.h> - -#ifdef __KERNEL__ - -struct old_sigaction { - __sighandler_t sa_handler; - old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -struct sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); - sigset_t sa_mask; /* mask last for extensibility */ -}; - -struct k_sigaction { - struct sigaction sa; -}; - -#else /* !__KERNEL__ */ - -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - - -typedef struct sigaltstack { - void *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ - -#include <asm/sigcontext.h> -#undef __HAVE_ARCH_SIG_BITOPS - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* __KERNEL__ */ - -#endif /* __V850_SIGNAL_H__ */ diff --git a/include/asm-v850/sim.h b/include/asm-v850/sim.h deleted file mode 100644 index 026932d476c..00000000000 --- a/include/asm-v850/sim.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * include/asm-v850/sim.h -- Machine-dependent defs for GDB v850e simulator - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_SIM_H__ -#define __V850_SIM_H__ - - -#define CPU_ARCH "v850e" -#define CPU_MODEL "v850e" -#define CPU_MODEL_LONG "NEC V850E" -#define PLATFORM "gdb/v850e" -#define PLATFORM_LONG "GDB V850E simulator" - - -/* We use a weird value for RAM, not just 0, for testing purposes. - These must match the values used in the linker script. */ -#define RAM_ADDR 0x8F000000 -#define RAM_SIZE 0x03000000 - - -/* For <asm/page.h> */ -#define PAGE_OFFSET RAM_ADDR - - -/* For <asm/entry.h> */ -/* `R0 RAM', used for a few miscellaneous variables that must be - accessible using a load instruction relative to R0. On real - processors, this usually is on-chip RAM, but here we just - choose an arbitrary address that meets the above constraint. */ -#define R0_RAM_ADDR 0xFFFFF000 - - -/* For <asm/irq.h> */ -#define NUM_CPU_IRQS 6 - - -#endif /* __V850_SIM_H__ */ diff --git a/include/asm-v850/sim85e2.h b/include/asm-v850/sim85e2.h deleted file mode 100644 index 8b4d6974066..00000000000 --- a/include/asm-v850/sim85e2.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * include/asm-v850/sim85e2.h -- Machine-dependent defs for - * V850E2 RTL simulator - * - * Copyright (C) 2002,03 NEC Electronics Corporation - * Copyright (C) 2002,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_SIM85E2_H__ -#define __V850_SIM85E2_H__ - - -#include <asm/v850e2.h> /* Based on V850E2 core. */ - - -/* Various memory areas supported by the simulator. - These should match the corresponding definitions in the linker script. */ - -/* `instruction RAM'; instruction fetches are much faster from IRAM than - from DRAM. */ -#define IRAM_ADDR 0 -#define IRAM_SIZE 0x00100000 /* 1MB */ -/* `data RAM', below and contiguous with the I/O space. - Data fetches are much faster from DRAM than from IRAM. */ -#define DRAM_ADDR 0xfff00000 -#define DRAM_SIZE 0x000ff000 /* 1020KB */ -/* `external ram'. Unlike the above RAM areas, this memory is cached, - so both instruction and data fetches should be (mostly) fast -- - however, currently only write-through caching is supported, so writes - to ERAM will be slow. */ -#define ERAM_ADDR 0x00100000 -#define ERAM_SIZE 0x07f00000 /* 127MB (max) */ -/* Dynamic RAM; uses memory controller. */ -#define SDRAM_ADDR 0x10000000 -#define SDRAM_SIZE 0x01000000 /* 16MB */ - - -/* Simulator specific control registers. */ -/* NOTHAL controls whether the simulator will stop at a `halt' insn. */ -#define SIM85E2_NOTHAL_ADDR 0xffffff22 -#define SIM85E2_NOTHAL (*(volatile u8 *)SIM85E2_NOTHAL_ADDR) -/* The simulator will stop N cycles after N is written to SIMFIN. */ -#define SIM85E2_SIMFIN_ADDR 0xffffff24 -#define SIM85E2_SIMFIN (*(volatile u16 *)SIM85E2_SIMFIN_ADDR) - - -/* For <asm/irq.h> */ -#define NUM_CPU_IRQS 64 - - -/* For <asm/page.h> */ -#define PAGE_OFFSET SDRAM_ADDR - - -/* For <asm/entry.h> */ -/* `R0 RAM', used for a few miscellaneous variables that must be accessible - using a load instruction relative to R0. The sim85e2 simulator - actually puts 1020K of RAM from FFF00000 to FFFFF000, so we arbitarily - choose a small portion at the end of that. */ -#define R0_RAM_ADDR 0xFFFFE000 - - -#endif /* __V850_SIM85E2_H__ */ diff --git a/include/asm-v850/sim85e2c.h b/include/asm-v850/sim85e2c.h deleted file mode 100644 index eee543ff3af..00000000000 --- a/include/asm-v850/sim85e2c.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * include/asm-v850/sim85e2c.h -- Machine-dependent defs for - * V850E2 RTL simulator - * - * Copyright (C) 2002 NEC Corporation - * Copyright (C) 2002 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_SIM85E2C_H__ -#define __V850_SIM85E2C_H__ - -/* Use generic sim85e2 settings, other than the various names. */ -#include <asm/sim85e2.h> - -#define CPU_MODEL "v850e2" -#define CPU_MODEL_LONG "NEC V850E2" -#define PLATFORM "sim85e2c" -#define PLATFORM_LONG "SIM85E2C V850E2 simulator" - -#endif /* __V850_SIM85E2C_H__ */ diff --git a/include/asm-v850/sim85e2s.h b/include/asm-v850/sim85e2s.h deleted file mode 100644 index ee066d5d3c5..00000000000 --- a/include/asm-v850/sim85e2s.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * include/asm-v850/sim85e2s.h -- Machine-dependent defs for - * V850E2 RTL simulator - * - * Copyright (C) 2003 NEC Electronics Corporation - * Copyright (C) 2003 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_SIM85E2S_H__ -#define __V850_SIM85E2S_H__ - -#include <asm/sim85e2.h> /* Use generic sim85e2 settings. */ -#if 0 -#include <asm/v850e2_cache.h> /* + cache */ -#endif - -#define CPU_MODEL "v850e2" -#define CPU_MODEL_LONG "NEC V850E2" -#define PLATFORM "sim85e2s" -#define PLATFORM_LONG "SIM85E2S V850E2 simulator" - -#endif /* __V850_SIM85E2S_H__ */ diff --git a/include/asm-v850/simsyscall.h b/include/asm-v850/simsyscall.h deleted file mode 100644 index 4a19d5ae9d1..00000000000 --- a/include/asm-v850/simsyscall.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * include/asm-v850/simsyscall.h -- `System calls' under the v850e emulator - * - * Copyright (C) 2001 NEC Corporation - * Copyright (C) 2001 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_SIMSYSCALL_H__ -#define __V850_SIMSYSCALL_H__ - -#define V850_SIM_SYS_exit(a...) V850_SIM_SYSCALL_1 (1 , ##a) -#define V850_SIM_SYS_fork(a...) V850_SIM_SYSCALL_0 (2 , ##a) -#define V850_SIM_SYS_read(a...) V850_SIM_SYSCALL_3 (3 , ##a) -#define V850_SIM_SYS_write(a...) V850_SIM_SYSCALL_3 (4 , ##a) -#define V850_SIM_SYS_open(a...) V850_SIM_SYSCALL_2 (5 , ##a) -#define V850_SIM_SYS_close(a...) V850_SIM_SYSCALL_1 (6 , ##a) -#define V850_SIM_SYS_wait4(a...) V850_SIM_SYSCALL_4 (7 , ##a) -/* #define V850_SIM_SYS_creat(a...) V850_SIM_SYSCALL_1 (8 , ##a) */ -/* #define V850_SIM_SYS_link(a...) V850_SIM_SYSCALL_1 (9 , ##a) */ -/* #define V850_SIM_SYS_unlink(a...) V850_SIM_SYSCALL_1 (10 , ##a) */ -#define V850_SIM_SYS_execv(a...) V850_SIM_SYSCALL_2 (11 , ##a) -/* #define V850_SIM_SYS_chdir(a...) V850_SIM_SYSCALL_1 (12 , ##a) */ -/* #define V850_SIM_SYS_mknod(a...) V850_SIM_SYSCALL_1 (14 , ##a) */ -#define V850_SIM_SYS_chmod(a...) V850_SIM_SYSCALL_2 (15 , ##a) -#define V850_SIM_SYS_chown(a...) V850_SIM_SYSCALL_2 (16 , ##a) -#define V850_SIM_SYS_lseek(a...) V850_SIM_SYSCALL_3 (19 , ##a) -/* #define V850_SIM_SYS_getpid(a...) V850_SIM_SYSCALL_1 (20 , ##a) */ -/* #define V850_SIM_SYS_isatty(a...) V850_SIM_SYSCALL_1 (21 , ##a) */ -/* #define V850_SIM_SYS_fstat(a...) V850_SIM_SYSCALL_1 (22 , ##a) */ -#define V850_SIM_SYS_time(a...) V850_SIM_SYSCALL_1 (23 , ##a) -#define V850_SIM_SYS_poll(a...) V850_SIM_SYSCALL_3 (24 , ##a) -#define V850_SIM_SYS_stat(a...) V850_SIM_SYSCALL_2 (38 , ##a) -#define V850_SIM_SYS_pipe(a...) V850_SIM_SYSCALL_1 (42 , ##a) -#define V850_SIM_SYS_times(a...) V850_SIM_SYSCALL_1 (43 , ##a) -#define V850_SIM_SYS_execve(a...) V850_SIM_SYSCALL_3 (59 , ##a) -#define V850_SIM_SYS_gettimeofday(a...) V850_SIM_SYSCALL_2 (116 , ##a) -/* #define V850_SIM_SYS_utime(a...) V850_SIM_SYSCALL_2 (201 , ##a) */ -/* #define V850_SIM_SYS_wait(a...) V850_SIM_SYSCALL_1 (202 , ##a) */ - -#define V850_SIM_SYS_make_raw(a...) V850_SIM_SYSCALL_1 (1024 , ##a) - - -#define V850_SIM_SYSCALL_0(_call) \ -({ \ - register int call __asm__ ("r6") = _call; \ - register int rval __asm__ ("r10"); \ - __asm__ __volatile__ ("trap 31" \ - : "=r" (rval) \ - : "r" (call) \ - : "r11", "memory"); \ - rval; \ -}) -#define V850_SIM_SYSCALL_1(_call, _arg0) \ -({ \ - register int call __asm__ ("r6") = _call; \ - register long arg0 __asm__ ("r7") = (long)_arg0; \ - register int rval __asm__ ("r10"); \ - __asm__ __volatile__ ("trap 31" \ - : "=r" (rval) \ - : "r" (call), "r" (arg0) \ - : "r11", "memory"); \ - rval; \ -}) -#define V850_SIM_SYSCALL_2(_call, _arg0, _arg1) \ -({ \ - register int call __asm__ ("r6") = _call; \ - register long arg0 __asm__ ("r7") = (long)_arg0; \ - register long arg1 __asm__ ("r8") = (long)_arg1; \ - register int rval __asm__ ("r10"); \ - __asm__ __volatile__ ("trap 31" \ - : "=r" (rval) \ - : "r" (call), "r" (arg0), "r" (arg1) \ - : "r11", "memory"); \ - rval; \ -}) -#define V850_SIM_SYSCALL_3(_call, _arg0, _arg1, _arg2) \ -({ \ - register int call __asm__ ("r6") = _call; \ - register long arg0 __asm__ ("r7") = (long)_arg0; \ - register long arg1 __asm__ ("r8") = (long)_arg1; \ - register long arg2 __asm__ ("r9") = (long)_arg2; \ - register int rval __asm__ ("r10"); \ - __asm__ __volatile__ ("trap 31" \ - : "=r" (rval) \ - : "r" (call), "r" (arg0), "r" (arg1), "r" (arg2)\ - : "r11", "memory"); \ - rval; \ -}) - -#define V850_SIM_SYSCALL(call, args...) \ - V850_SIM_SYS_##call (args) - -#endif /* __V850_SIMSYSCALL_H__ */ diff --git a/include/asm-v850/socket.h b/include/asm-v850/socket.h deleted file mode 100644 index e199a2bf12a..00000000000 --- a/include/asm-v850/socket.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef __V850_SOCKET_H__ -#define __V850_SOCKET_H__ - -#include <asm/sockios.h> - -/* For setsockoptions(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#endif /* __V850_SOCKET_H__ */ diff --git a/include/asm-v850/sockios.h b/include/asm-v850/sockios.h deleted file mode 100644 index 823e106e6cd..00000000000 --- a/include/asm-v850/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __V850_SOCKIOS_H__ -#define __V850_SOCKIOS_H__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* __V850_SOCKIOS_H__ */ diff --git a/include/asm-v850/stat.h b/include/asm-v850/stat.h deleted file mode 100644 index c68c60d06e2..00000000000 --- a/include/asm-v850/stat.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * include/asm-v850/stat.h -- v850 stat structure - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_STAT_H__ -#define __V850_STAT_H__ - -#include <asm/posix_types.h> - -struct stat { - unsigned int st_dev; - unsigned long st_ino; - unsigned int st_mode; - unsigned int st_nlink; - unsigned int st_uid; - unsigned int st_gid; - unsigned int st_rdev; - long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long __unused1; - unsigned long st_mtime; - unsigned long __unused2; - unsigned long st_ctime; - unsigned long __unused3; - unsigned long __unused4; - unsigned long __unused5; -}; - -struct stat64 { - unsigned long long st_dev; - unsigned long __unused1; - - unsigned long long st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned int st_uid; - unsigned int st_gid; - - unsigned long long st_rdev; - unsigned long __unused3; - - long long st_size; - unsigned long st_blksize; - - unsigned long st_blocks; /* No. of 512-byte blocks allocated */ - unsigned long __unused4; /* future possible st_blocks high bits */ - - unsigned long st_atime; - unsigned long st_atime_nsec; - - unsigned long st_mtime; - unsigned long st_mtime_nsec; - - unsigned long st_ctime; - unsigned long st_ctime_nsec; - - unsigned long __unused8; -}; - -#endif /* __V850_STAT_H__ */ diff --git a/include/asm-v850/statfs.h b/include/asm-v850/statfs.h deleted file mode 100644 index ea1596607f2..00000000000 --- a/include/asm-v850/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __V850_STATFS_H__ -#define __V850_STATFS_H__ - -#include <asm-generic/statfs.h> - -#endif /* __V850_STATFS_H__ */ diff --git a/include/asm-v850/string.h b/include/asm-v850/string.h deleted file mode 100644 index 478e234789d..00000000000 --- a/include/asm-v850/string.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * include/asm-v850/string.h -- Architecture specific string routines - * - * Copyright (C) 2001,02 NEC Corporation - * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_STRING_H__ -#define __V850_STRING_H__ - -#define __HAVE_ARCH_MEMCPY -#define __HAVE_ARCH_MEMSET -#define __HAVE_ARCH_MEMMOVE - -extern void *memcpy (void *, const void *, __kernel_size_t); -extern void *memset (void *, int, __kernel_size_t); -extern void *memmove (void *, const void *, __kernel_size_t); - -#endif /* __V850_STRING_H__ */ diff --git a/include/asm-v850/system.h b/include/asm-v850/system.h deleted file mode 100644 index 7daf1fdee11..00000000000 --- a/include/asm-v850/system.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/asm-v850/system.h -- Low-level interrupt/thread ops - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_SYSTEM_H__ -#define __V850_SYSTEM_H__ - -#include <linux/linkage.h> -#include <asm/ptrace.h> - - -/* - * switch_to(n) should switch tasks to task ptr, first checking that - * ptr isn't the current task, in which case it does nothing. - */ -struct thread_struct; -extern void *switch_thread (struct thread_struct *last, - struct thread_struct *next); -#define switch_to(prev,next,last) \ - do { \ - if (prev != next) { \ - (last) = switch_thread (&prev->thread, &next->thread); \ - } \ - } while (0) - - -/* Enable/disable interrupts. */ -#define local_irq_enable() __asm__ __volatile__ ("ei") -#define local_irq_disable() __asm__ __volatile__ ("di") - -#define local_save_flags(flags) \ - __asm__ __volatile__ ("stsr %1, %0" : "=r" (flags) : "i" (SR_PSW)) -#define local_restore_flags(flags) \ - __asm__ __volatile__ ("ldsr %0, %1" :: "r" (flags), "i" (SR_PSW)) - -/* For spinlocks etc */ -#define local_irq_save(flags) \ - do { local_save_flags (flags); local_irq_disable (); } while (0) -#define local_irq_restore(flags) \ - local_restore_flags (flags); - - -static inline int irqs_disabled (void) -{ - unsigned flags; - local_save_flags (flags); - return !!(flags & 0x20); -} - - -/* - * Force strict CPU ordering. - * Not really required on v850... - */ -#define nop() __asm__ __volatile__ ("nop") -#define mb() __asm__ __volatile__ ("" ::: "memory") -#define rmb() mb () -#define wmb() mb () -#define read_barrier_depends() ((void)0) -#define set_mb(var, value) do { xchg (&var, value); } while (0) - -#define smp_mb() mb () -#define smp_rmb() rmb () -#define smp_wmb() wmb () -#define smp_read_barrier_depends() read_barrier_depends() - -#define xchg(ptr, with) \ - ((__typeof__ (*(ptr)))__xchg ((unsigned long)(with), (ptr), sizeof (*(ptr)))) - -static inline unsigned long __xchg (unsigned long with, - __volatile__ void *ptr, int size) -{ - unsigned long tmp, flags; - - local_irq_save (flags); - - switch (size) { - case 1: - tmp = *(unsigned char *)ptr; - *(unsigned char *)ptr = with; - break; - case 2: - tmp = *(unsigned short *)ptr; - *(unsigned short *)ptr = with; - break; - case 4: - tmp = *(unsigned long *)ptr; - *(unsigned long *)ptr = with; - break; - } - - local_irq_restore (flags); - - return tmp; -} - -#include <asm-generic/cmpxchg-local.h> - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#ifndef CONFIG_SMP -#include <asm-generic/cmpxchg.h> -#endif - -#define arch_align_stack(x) (x) - -#endif /* __V850_SYSTEM_H__ */ diff --git a/include/asm-v850/teg.h b/include/asm-v850/teg.h deleted file mode 100644 index acc8c7d9532..00000000000 --- a/include/asm-v850/teg.h +++ /dev/null @@ -1,101 +0,0 @@ -/* - * include/asm-v850/teg.h -- NB85E-TEG cpu chip - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_TEG_H__ -#define __V850_TEG_H__ - - -/* The TEG uses the V850E cpu core. */ -#include <asm/v850e.h> -#include <asm/v850e_cache.h> - - -#define CPU_MODEL "v850e/nb85e-teg" -#define CPU_MODEL_LONG "NEC V850E/NB85E TEG" - - -/* For <asm/entry.h> */ -/* We use on-chip RAM, for a few miscellaneous variables that must be - accessible using a load instruction relative to R0. On the NB85E/TEG, - There's 60KB of iRAM starting at 0xFFFF0000, however we need the base - address to be addressable by a 16-bit signed offset, so we only use the - second half of it starting from 0xFFFF8000. */ -#define R0_RAM_ADDR 0xFFFF8000 - - -/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). - Some of these are parameterized even though there's only a single - interrupt, for compatibility with some generic code that works on other - processor models. */ -#define IRQ_INTCMD(n) 6 /* interval timer interrupt */ -#define IRQ_INTCMD_NUM 1 -#define IRQ_INTSER(n) 16 /* UART reception error */ -#define IRQ_INTSER_NUM 1 -#define IRQ_INTSR(n) 17 /* UART reception completion */ -#define IRQ_INTSR_NUM 1 -#define IRQ_INTST(n) 18 /* UART transmission completion */ -#define IRQ_INTST_NUM 1 - -/* For <asm/irq.h> */ -#define NUM_CPU_IRQS 64 - - -/* TEG UART details. */ -#define V850E_UART_BASE_ADDR(n) (0xFFFFF600 + 0x10 * (n)) -#define V850E_UART_ASIM_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x0) -#define V850E_UART_ASIS_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x2) -#define V850E_UART_ASIF_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x4) -#define V850E_UART_CKSR_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x6) -#define V850E_UART_BRGC_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x8) -#define V850E_UART_TXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0xA) -#define V850E_UART_RXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0xC) -#define V850E_UART_NUM_CHANNELS 1 -#define V850E_UART_BASE_FREQ CPU_CLOCK_FREQ -/* This is a function that gets called before configuring the UART. */ -#define V850E_UART_PRE_CONFIGURE teg_uart_pre_configure -#ifndef __ASSEMBLY__ -extern void teg_uart_pre_configure (unsigned chan, - unsigned cflags, unsigned baud); -#endif - - -/* The TEG RTPU. */ -#define V850E_RTPU_BASE_ADDR 0xFFFFF210 - - -/* TEG series timer D details. */ -#define V850E_TIMER_D_BASE_ADDR 0xFFFFF210 -#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0) -#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4) -#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x8) -#define V850E_TIMER_D_BASE_FREQ CPU_CLOCK_FREQ - - -/* `Interrupt Source Select' control register. */ -#define TEG_ISS_ADDR 0xFFFFF7FA -#define TEG_ISS (*(volatile u8 *)TEG_ISS_ADDR) - -/* Port 0 I/O register (bits 0-3 used). */ -#define TEG_PORT0_IO_ADDR 0xFFFFF7F2 -#define TEG_PORT0_IO (*(volatile u8 *)TEG_PORT0_IO_ADDR) -/* Port 0 control register (bits 0-3 control mode, 0 = output, 1 = input). */ -#define TEG_PORT0_PM_ADDR 0xFFFFF7F4 -#define TEG_PORT0_PM (*(volatile u8 *)TEG_PORT0_PM_ADDR) - - -#ifndef __ASSEMBLY__ -extern void teg_init_irqs (void); -#endif - - -#endif /* __V850_TEG_H__ */ diff --git a/include/asm-v850/termbits.h b/include/asm-v850/termbits.h deleted file mode 100644 index 295d7bf6945..00000000000 --- a/include/asm-v850/termbits.h +++ /dev/null @@ -1,200 +0,0 @@ -#ifndef __V850_TERMBITS_H__ -#define __V850_TERMBITS_H__ - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shifr from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 - - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __V850_TERMBITS_H__ */ diff --git a/include/asm-v850/termios.h b/include/asm-v850/termios.h deleted file mode 100644 index fcd171838d9..00000000000 --- a/include/asm-v850/termios.h +++ /dev/null @@ -1,90 +0,0 @@ -#ifndef __V850_TERMIOS_H__ -#define __V850_TERMIOS_H__ - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __V850_TERMIOS_H__ */ diff --git a/include/asm-v850/thread_info.h b/include/asm-v850/thread_info.h deleted file mode 100644 index 1a9e6ae0c5f..00000000000 --- a/include/asm-v850/thread_info.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - * include/asm-v850/thread_info.h -- v850 low-level thread information - * - * Copyright (C) 2002 NEC Corporation - * Copyright (C) 2002 Miles Bader <miles@gnu.org> - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * This file was derived from the PPC version, include/asm-ppc/thread_info.h - * which was adapted from the i386 version by Paul Mackerras - */ - -#ifndef __V850_THREAD_INFO_H__ -#define __V850_THREAD_INFO_H__ - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ - -/* - * low level task data. - * If you change this, change the TI_* offsets below to match. - */ -struct thread_info { - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - int cpu; /* cpu we're on */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - struct restart_block restart_block; -}; - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* - * macros/functions for gaining access to the thread information structure - */ - -/* thread information allocation */ -#define alloc_thread_info(tsk) ((struct thread_info *) \ - __get_free_pages(GFP_KERNEL, 1)) -#define free_thread_info(ti) free_pages((unsigned long) (ti), 1) - -#endif /* __ASSEMBLY__ */ - - -/* - * Offsets in thread_info structure, used in assembly code - */ -#define TI_TASK 0 -#define TI_EXECDOMAIN 4 -#define TI_FLAGS 8 -#define TI_CPU 12 -#define TI_PREEMPT 16 - -#define PREEMPT_ACTIVE 0x4000000 - -/* - * thread information flag bit numbers - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling - TIF_NEED_RESCHED */ -#define TIF_MEMDIE 4 - -/* as above, but as bit values */ -#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) -#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) - - -/* Size of kernel stack for each process. */ -#define THREAD_SIZE 0x2000 - -/* The alignment of kernel threads, with thread_info structures at their - base. Thus, a pointer for a task's task structure can be derived from - its kernel stack pointer. */ -#define THREAD_ALIGNMENT THREAD_SIZE -#define THREAD_MASK (-THREAD_ALIGNMENT) - - -#ifdef __ASSEMBLY__ - -/* Put a pointer to the current thread_info structure into REG. Note that - this definition requires THREAD_MASK to be representable as a signed - 16-bit value. */ -#define GET_CURRENT_THREAD(reg) \ - /* Use `addi' and then `and' instead of just `andi', because \ - `addi' sign-extends the immediate value, whereas `andi' \ - zero-extends it. */ \ - addi THREAD_MASK, r0, reg; \ - and sp, reg - -#else - -/* Return a pointer to the current thread_info structure. */ -static inline struct thread_info *current_thread_info (void) -{ - register unsigned long sp __asm__ ("sp"); - return (struct thread_info *)(sp & THREAD_MASK); -} - -#endif /* __ASSEMBLY__ */ - - -#endif /* __KERNEL__ */ - -#endif /* __V850_THREAD_INFO_H__ */ diff --git a/include/asm-v850/timex.h b/include/asm-v850/timex.h deleted file mode 100644 index 6279e5a0ee8..00000000000 --- a/include/asm-v850/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * linux/include/asm-v850/timex.h - * - * v850 architecture timex specifications - */ -#ifndef __V850_TIMEX_H__ -#define __V850_TIMEX_H__ - -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles(void) -{ - return 0; -} - -#endif /* __V850_TIMEX_H__ */ diff --git a/include/asm-v850/tlb.h b/include/asm-v850/tlb.h deleted file mode 100644 index 73bc9ead40d..00000000000 --- a/include/asm-v850/tlb.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-v850/tlb.h - * - * Copyright (C) 2002 NEC Corporation - * Copyright (C) 2002 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_TLB_H__ -#define __V850_TLB_H__ - -#define tlb_flush(tlb) ((void)0) - -#include <asm-generic/tlb.h> - -#endif /* __V850_TLB_H__ */ diff --git a/include/asm-v850/tlbflush.h b/include/asm-v850/tlbflush.h deleted file mode 100644 index c44aa64449c..00000000000 --- a/include/asm-v850/tlbflush.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * include/asm-v850/tlbflush.h - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_TLBFLUSH_H__ -#define __V850_TLBFLUSH_H__ - -#include <asm/machdep.h> - - -/* - * flush all user-space atc entries. - */ -static inline void __flush_tlb(void) -{ - BUG (); -} - -static inline void __flush_tlb_one(unsigned long addr) -{ - BUG (); -} - -#define flush_tlb() __flush_tlb() - -/* - * flush all atc entries (both kernel and user-space entries). - */ -static inline void flush_tlb_all(void) -{ - BUG (); -} - -static inline void flush_tlb_mm(struct mm_struct *mm) -{ - BUG (); -} - -static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) -{ - BUG (); -} - -static inline void flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, unsigned long end) -{ - BUG (); -} - -static inline void flush_tlb_kernel_page(unsigned long addr) -{ - BUG (); -} - -#endif /* __V850_TLBFLUSH_H__ */ diff --git a/include/asm-v850/topology.h b/include/asm-v850/topology.h deleted file mode 100644 index 6040e41d794..00000000000 --- a/include/asm-v850/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __V850_TOPOLOGY_H__ -#define __V850_TOPOLOGY_H__ - -#include <asm-generic/topology.h> - -#endif /* __V850_TOPOLOGY_H__ */ diff --git a/include/asm-v850/types.h b/include/asm-v850/types.h deleted file mode 100644 index 89f735ee41d..00000000000 --- a/include/asm-v850/types.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef __V850_TYPES_H__ -#define __V850_TYPES_H__ - -#ifndef __ASSEMBLY__ - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ -#include <asm-generic/int-ll64.h> - -typedef unsigned short umode_t; - -#endif /* !__ASSEMBLY__ */ - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -/* Dma addresses are 32-bits wide. */ - -typedef u32 dma_addr_t; - -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* __V850_TYPES_H__ */ diff --git a/include/asm-v850/uaccess.h b/include/asm-v850/uaccess.h deleted file mode 100644 index 64563c409bb..00000000000 --- a/include/asm-v850/uaccess.h +++ /dev/null @@ -1,159 +0,0 @@ -#ifndef __V850_UACCESS_H__ -#define __V850_UACCESS_H__ - -/* - * User space memory access functions - */ - -#include <linux/errno.h> -#include <linux/string.h> - -#include <asm/segment.h> -#include <asm/machdep.h> - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -static inline int access_ok (int type, const void *addr, unsigned long size) -{ - /* XXX I guess we should check against real ram bounds at least, and - possibly make sure ADDR is not within the kernel. - For now we just check to make sure it's not a small positive - or negative value, as that will at least catch some kinds of - error. In particular, we make sure that ADDR's not within the - interrupt vector area, which we know starts at zero, or within the - peripheral-I/O area, which is located just _before_ zero. */ - unsigned long val = (unsigned long)addr; - return val >= (0x80 + NUM_CPU_IRQS*16) && val < 0xFFFFF000; -} - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table (unsigned long); - - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - */ - -extern int bad_user_access_length (void); - -#define __get_user(var, ptr) \ - ({ \ - int __gu_err = 0; \ - typeof(*(ptr)) __gu_val = 0; \ - switch (sizeof (*(ptr))) { \ - case 1: \ - case 2: \ - case 4: \ - __gu_val = *(ptr); \ - break; \ - case 8: \ - memcpy(&__gu_val, ptr, sizeof(__gu_val)); \ - break; \ - default: \ - __gu_val = 0; \ - __gu_err = __get_user_bad (); \ - break; \ - } \ - (var) = __gu_val; \ - __gu_err; \ - }) -#define __get_user_bad() (bad_user_access_length (), (-EFAULT)) - -#define __put_user(var, ptr) \ - ({ \ - int __pu_err = 0; \ - switch (sizeof (*(ptr))) { \ - case 1: \ - case 2: \ - case 4: \ - *(ptr) = (var); \ - break; \ - case 8: { \ - typeof(*(ptr)) __pu_val = 0; \ - memcpy(ptr, &__pu_val, sizeof(__pu_val)); \ - } \ - break; \ - default: \ - __pu_err = __put_user_bad (); \ - break; \ - } \ - __pu_err; \ - }) -#define __put_user_bad() (bad_user_access_length (), (-EFAULT)) - -#define put_user(x, ptr) __put_user(x, ptr) -#define get_user(x, ptr) __get_user(x, ptr) - -#define __copy_from_user(to, from, n) (memcpy (to, from, n), 0) -#define __copy_to_user(to, from, n) (memcpy(to, from, n), 0) - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -#define copy_from_user(to, from, n) __copy_from_user (to, from, n) -#define copy_to_user(to, from, n) __copy_to_user(to, from, n) - -#define copy_to_user_ret(to,from,n,retval) \ - ({ if (copy_to_user (to,from,n)) return retval; }) - -#define copy_from_user_ret(to,from,n,retval) \ - ({ if (copy_from_user (to,from,n)) return retval; }) - -/* - * Copy a null terminated string from userspace. - */ - -static inline long -strncpy_from_user (char *dst, const char *src, long count) -{ - char *tmp; - strncpy (dst, src, count); - for (tmp = dst; *tmp && count > 0; tmp++, count--) - ; - return tmp - dst; -} - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 on exception, a value greater than N if too long - */ -static inline long strnlen_user (const char *src, long n) -{ - return strlen (src) + 1; -} - -#define strlen_user(str) strnlen_user (str, 32767) - -/* - * Zero Userspace - */ - -static inline unsigned long -clear_user (void *to, unsigned long n) -{ - memset (to, 0, n); - return 0; -} - -#endif /* __V850_UACCESS_H__ */ diff --git a/include/asm-v850/ucontext.h b/include/asm-v850/ucontext.h deleted file mode 100644 index 303c21590cf..00000000000 --- a/include/asm-v850/ucontext.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef __V850_UCONTEXT_H__ -#define __V850_UCONTEXT_H__ - -#include <asm/sigcontext.h> - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* __V850_UCONTEXT_H__ */ diff --git a/include/asm-v850/unaligned.h b/include/asm-v850/unaligned.h deleted file mode 100644 index 53122b28491..00000000000 --- a/include/asm-v850/unaligned.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2001 NEC Corporation - * Copyright (C) 2001 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Note that some v850 chips support unaligned access, but it seems too - * annoying to use. - */ -#ifndef _ASM_V850_UNALIGNED_H -#define _ASM_V850_UNALIGNED_H - -#include <linux/unaligned/be_byteshift.h> -#include <linux/unaligned/le_byteshift.h> -#include <linux/unaligned/generic.h> - -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le - -#endif /* _ASM_V850_UNALIGNED_H */ diff --git a/include/asm-v850/unistd.h b/include/asm-v850/unistd.h deleted file mode 100644 index 2241ed45ecf..00000000000 --- a/include/asm-v850/unistd.h +++ /dev/null @@ -1,244 +0,0 @@ -/* - * include/asm-v850/unistd.h -- System call numbers and invocation mechanism - * - * Copyright (C) 2001,02,03,04 NEC Electronics Corporation - * Copyright (C) 2001,02,03,04 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_UNISTD_H__ -#define __V850_UNISTD_H__ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_chown 16 -#define __NR_break 17 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_setpgid 57 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_ugetrlimit 76 -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -#define __NR_mmap 90 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_vhangup 111 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread 180 -#define __NR_pwrite 181 -#define __NR_lchown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_fcntl64 198 -#define __NR_getdents64 199 -#define __NR_pivot_root 200 -#define __NR_gettid 201 -#define __NR_tkill 202 - -#ifdef __KERNEL__ - -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGACTION - -/* - * "Conditional" syscalls - */ -#define cond_syscall(name) \ - asm (".weak\t" C_SYMBOL_STRING(name) ";" \ - ".set\t" C_SYMBOL_STRING(name) "," C_SYMBOL_STRING(sys_ni_syscall)) -#if 0 -/* This doesn't work if there's a function prototype for NAME visible, - because the argument types probably won't match. */ -#define cond_syscall(name) \ - void name (void) __attribute__ ((weak, alias ("sys_ni_syscall"))); -#endif - -#endif /* __KERNEL__ */ -#endif /* __V850_UNISTD_H__ */ diff --git a/include/asm-v850/user.h b/include/asm-v850/user.h deleted file mode 100644 index 63cdc567d27..00000000000 --- a/include/asm-v850/user.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef __V850_USER_H__ -#define __V850_USER_H__ - -/* Adapted from <asm-ppc/user.h>. */ - -#include <linux/ptrace.h> -#include <asm/page.h> - -/* - * Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the `trad-core' bfd, NOT the osf-core). The file contents - * are as follows: - * - * upage: 1 page consisting of a user struct that tells gdb - * what is present in the file. Directly after this is a - * copy of the task_struct, which is currently not used by gdb, - * but it may come in handy at some point. All of the registers - * are stored as part of the upage. The upage should always be - * only one page long. - * data: The data segment follows next. We use current->end_text to - * current->brk to pick up all of the user variables, plus any memory - * that may have been sbrk'ed. No attempt is made to determine if a - * page is demand-zero or if a page is totally unused, we just cover - * the entire range. All of the addresses are rounded in such a way - * that an integral number of pages is written. - * stack: We need the stack information in order to get a meaningful - * backtrace. We need to write the data from usp to - * current->start_stack, so we round each of these in order to be able - * to write an integer number of pages. - */ -struct user { - struct pt_regs regs; /* entire machine state */ - size_t u_tsize; /* text size (pages) */ - size_t u_dsize; /* data size (pages) */ - size_t u_ssize; /* stack size (pages) */ - unsigned long start_code; /* text starting address */ - unsigned long start_data; /* data starting address */ - unsigned long start_stack; /* stack starting address */ - long int signal; /* signal causing core dump */ - unsigned long u_ar0; /* help gdb find registers */ - unsigned long magic; /* identifies a core file */ - char u_comm[32]; /* user command name */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_DATA_START_ADDR (u.start_data) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif /* __V850_USER_H__ */ diff --git a/include/asm-v850/v850e.h b/include/asm-v850/v850e.h deleted file mode 100644 index 5a222eb5117..00000000000 --- a/include/asm-v850/v850e.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * include/asm-v850/v850e.h -- V850E CPU - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_V850E_H__ -#define __V850_V850E_H__ - -#include <asm/v850e_intc.h> - -#define CPU_ARCH "v850e" - -#endif /* __V850_V850E_H__ */ diff --git a/include/asm-v850/v850e2.h b/include/asm-v850/v850e2.h deleted file mode 100644 index 48680408ab7..00000000000 --- a/include/asm-v850/v850e2.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * include/asm-v850/v850e2.h -- Machine-dependent defs for V850E2 CPUs - * - * Copyright (C) 2002,03 NEC Electronics Corporation - * Copyright (C) 2002,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_V850E2_H__ -#define __V850_V850E2_H__ - -#include <asm/v850e_intc.h> /* v850e-style interrupt system. */ - - -#define CPU_ARCH "v850e2" - - -/* Control registers. */ - -/* Chip area select control */ -#define V850E2_CSC_ADDR(n) (0xFFFFF060 + (n) * 2) -#define V850E2_CSC(n) (*(volatile u16 *)V850E2_CSC_ADDR(n)) -/* I/O area select control */ -#define V850E2_BPC_ADDR 0xFFFFF064 -#define V850E2_BPC (*(volatile u16 *)V850E2_BPC_ADDR) -/* Bus size configuration */ -#define V850E2_BSC_ADDR 0xFFFFF066 -#define V850E2_BSC (*(volatile u16 *)V850E2_BSC_ADDR) -/* Endian configuration */ -#define V850E2_BEC_ADDR 0xFFFFF068 -#define V850E2_BEC (*(volatile u16 *)V850E2_BEC_ADDR) -/* Cache configuration */ -#define V850E2_BHC_ADDR 0xFFFFF06A -#define V850E2_BHC (*(volatile u16 *)V850E2_BHC_ADDR) -/* NPB strobe-wait configuration */ -#define V850E2_VSWC_ADDR 0xFFFFF06E -#define V850E2_VSWC (*(volatile u16 *)V850E2_VSWC_ADDR) -/* Bus cycle type */ -#define V850E2_BCT_ADDR(n) (0xFFFFF480 + (n) * 2) -#define V850E2_BCT(n) (*(volatile u16 *)V850E2_BCT_ADDR(n)) -/* Data wait control */ -#define V850E2_DWC_ADDR(n) (0xFFFFF484 + (n) * 2) -#define V850E2_DWC(n) (*(volatile u16 *)V850E2_DWC_ADDR(n)) -/* Bus cycle control */ -#define V850E2_BCC_ADDR 0xFFFFF488 -#define V850E2_BCC (*(volatile u16 *)V850E2_BCC_ADDR) -/* Address wait control */ -#define V850E2_ASC_ADDR 0xFFFFF48A -#define V850E2_ASC (*(volatile u16 *)V850E2_ASC_ADDR) -/* Local bus sizing control */ -#define V850E2_LBS_ADDR 0xFFFFF48E -#define V850E2_LBS (*(volatile u16 *)V850E2_LBS_ADDR) -/* Line buffer control */ -#define V850E2_LBC_ADDR(n) (0xFFFFF490 + (n) * 2) -#define V850E2_LBC(n) (*(volatile u16 *)V850E2_LBC_ADDR(n)) -/* SDRAM configuration */ -#define V850E2_SCR_ADDR(n) (0xFFFFF4A0 + (n) * 4) -#define V850E2_SCR(n) (*(volatile u16 *)V850E2_SCR_ADDR(n)) -/* SDRAM refresh cycle control */ -#define V850E2_RFS_ADDR(n) (0xFFFFF4A2 + (n) * 4) -#define V850E2_RFS(n) (*(volatile u16 *)V850E2_RFS_ADDR(n)) - - -#endif /* __V850_V850E2_H__ */ diff --git a/include/asm-v850/v850e2_cache.h b/include/asm-v850/v850e2_cache.h deleted file mode 100644 index 87edf0d311d..00000000000 --- a/include/asm-v850/v850e2_cache.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * include/asm-v850/v850e2_cache_cache.h -- Cache control for V850E2 - * cache memories - * - * Copyright (C) 2003,05 NEC Electronics Corporation - * Copyright (C) 2003,05 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_V850E2_CACHE_H__ -#define __V850_V850E2_CACHE_H__ - -#include <asm/types.h> - - -/* Cache control registers. */ - -/* Bus Transaction Control */ -#define V850E2_CACHE_BTSC_ADDR 0xFFFFF070 -#define V850E2_CACHE_BTSC (*(volatile u16 *)V850E2_CACHE_BTSC_ADDR) -#define V850E2_CACHE_BTSC_ICM 0x0001 /* icache enable */ -#define V850E2_CACHE_BTSC_DCM0 0x0004 /* dcache enable, bit 0 */ -#define V850E2_CACHE_BTSC_DCM1 0x0008 /* dcache enable, bit 1 */ -#define V850E2_CACHE_BTSC_DCM_WT /* write-through */ \ - V850E2_CACHE_BTSC_DCM0 -#ifdef CONFIG_V850E2_V850E2S -# define V850E2_CACHE_BTSC_DCM_WB_NO_ALLOC /* write-back, non-alloc */ \ - V850E2_CACHE_BTSC_DCM1 -# define V850E2_CACHE_BTSC_DCM_WB_ALLOC /* write-back, non-alloc */ \ - (V850E2_CACHE_BTSC_DCM1 | V850E2_CACHE_BTSC_DCM0) -# define V850E2_CACHE_BTSC_ISEQ 0x0010 /* icache `address sequence mode' */ -# define V850E2_CACHE_BTSC_DSEQ 0x0020 /* dcache `address sequence mode' */ -# define V850E2_CACHE_BTSC_IRFC 0x0030 -# define V850E2_CACHE_BTSC_ILCD 0x4000 -# define V850E2_CACHE_BTSC_VABE 0x8000 -#endif /* CONFIG_V850E2_V850E2S */ - -/* Cache operation start address register (low-bits). */ -#define V850E2_CACHE_CADL_ADDR 0xFFFFF074 -#define V850E2_CACHE_CADL (*(volatile u16 *)V850E2_CACHE_CADL_ADDR) -/* Cache operation start address register (high-bits). */ -#define V850E2_CACHE_CADH_ADDR 0xFFFFF076 -#define V850E2_CACHE_CADH (*(volatile u16 *)V850E2_CACHE_CADH_ADDR) -/* Cache operation count register. */ -#define V850E2_CACHE_CCNT_ADDR 0xFFFFF078 -#define V850E2_CACHE_CCNT (*(volatile u16 *)V850E2_CACHE_CCNT_ADDR) -/* Cache operation specification register. */ -#define V850E2_CACHE_COPR_ADDR 0xFFFFF07A -#define V850E2_CACHE_COPR (*(volatile u16 *)V850E2_CACHE_COPR_ADDR) -#define V850E2_CACHE_COPR_STRT 0x0001 /* start cache operation */ -#define V850E2_CACHE_COPR_LBSL 0x0100 /* 0 = icache, 1 = dcache */ -#define V850E2_CACHE_COPR_WSLE 0x0200 /* operate on cache way */ -#define V850E2_CACHE_COPR_WSL(way) ((way) * 0x0400) /* way select */ -#define V850E2_CACHE_COPR_CFC(op) ((op) * 0x1000) /* cache function code */ - - -/* Size of a cache line in bytes. */ -#define V850E2_CACHE_LINE_SIZE_BITS 4 -#define V850E2_CACHE_LINE_SIZE (1 << V850E2_CACHE_LINE_SIZE_BITS) - -/* The size of each cache `way' in lines. */ -#define V850E2_CACHE_WAY_SIZE 256 - - -/* For <asm/cache.h> */ -#define L1_CACHE_BYTES V850E2_CACHE_LINE_SIZE -#define L1_CACHE_SHIFT V850E2_CACHE_LINE_SIZE_BITS - - -#endif /* __V850_V850E2_CACHE_H__ */ diff --git a/include/asm-v850/v850e_cache.h b/include/asm-v850/v850e_cache.h deleted file mode 100644 index aa7d7eb9da5..00000000000 --- a/include/asm-v850/v850e_cache.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-v850/v850e_cache.h -- Cache control for V850E cache memories - * - * Copyright (C) 2001,03 NEC Electronics Corporation - * Copyright (C) 2001,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -/* This file implements cache control for the rather simple cache used on - some V850E CPUs, specifically the NB85E/TEG CPU-core and the V850E/ME2 - CPU. V850E2 processors have their own (better) cache - implementation. */ - -#ifndef __V850_V850E_CACHE_H__ -#define __V850_V850E_CACHE_H__ - -#include <asm/types.h> - - -/* Cache control registers. */ -#define V850E_CACHE_BHC_ADDR 0xFFFFF06A -#define V850E_CACHE_BHC (*(volatile u16 *)V850E_CACHE_BHC_ADDR) -#define V850E_CACHE_ICC_ADDR 0xFFFFF070 -#define V850E_CACHE_ICC (*(volatile u16 *)V850E_CACHE_ICC_ADDR) -#define V850E_CACHE_ISI_ADDR 0xFFFFF072 -#define V850E_CACHE_ISI (*(volatile u16 *)V850E_CACHE_ISI_ADDR) -#define V850E_CACHE_DCC_ADDR 0xFFFFF078 -#define V850E_CACHE_DCC (*(volatile u16 *)V850E_CACHE_DCC_ADDR) - -/* Size of a cache line in bytes. */ -#define V850E_CACHE_LINE_SIZE 16 - -/* For <asm/cache.h> */ -#define L1_CACHE_BYTES V850E_CACHE_LINE_SIZE - - -#if defined(__KERNEL__) && !defined(__ASSEMBLY__) -/* Set caching params via the BHC, ICC, and DCC registers. */ -void v850e_cache_enable (u16 bhc, u16 icc, u16 dcc); -#endif /* __KERNEL__ && !__ASSEMBLY__ */ - - -#endif /* __V850_V850E_CACHE_H__ */ diff --git a/include/asm-v850/v850e_intc.h b/include/asm-v850/v850e_intc.h deleted file mode 100644 index 6fdf9570831..00000000000 --- a/include/asm-v850/v850e_intc.h +++ /dev/null @@ -1,133 +0,0 @@ -/* - * include/asm-v850/v850e_intc.h -- V850E CPU interrupt controller (INTC) - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_V850E_INTC_H__ -#define __V850_V850E_INTC_H__ - - -/* There are 4 16-bit `Interrupt Mask Registers' located contiguously - starting from this base. Each interrupt uses a single bit to - indicated enabled/disabled status. */ -#define V850E_INTC_IMR_BASE_ADDR 0xFFFFF100 -#define V850E_INTC_IMR_ADDR(irq) (V850E_INTC_IMR_BASE_ADDR + ((irq) >> 3)) -#define V850E_INTC_IMR_BIT(irq) ((irq) & 0x7) - -/* Each maskable interrupt has a single-byte control register at this - address. */ -#define V850E_INTC_IC_BASE_ADDR 0xFFFFF110 -#define V850E_INTC_IC_ADDR(irq) (V850E_INTC_IC_BASE_ADDR + ((irq) << 1)) -#define V850E_INTC_IC(irq) (*(volatile u8 *)V850E_INTC_IC_ADDR(irq)) -/* Encode priority PR for storing in an interrupt control register. */ -#define V850E_INTC_IC_PR(pr) (pr) -/* Interrupt disable bit in an interrupt control register. */ -#define V850E_INTC_IC_MK_BIT 6 -#define V850E_INTC_IC_MK (1 << V850E_INTC_IC_MK_BIT) -/* Interrupt pending flag in an interrupt control register. */ -#define V850E_INTC_IC_IF_BIT 7 -#define V850E_INTC_IC_IF (1 << V850E_INTC_IC_IF_BIT) - -/* The ISPR (In-service priority register) contains one bit for each interrupt - priority level, which is set to one when that level is currently being - serviced (and thus blocking any interrupts of equal or lesser level). */ -#define V850E_INTC_ISPR_ADDR 0xFFFFF1FA -#define V850E_INTC_ISPR (*(volatile u8 *)V850E_INTC_ISPR_ADDR) - - -#ifndef __ASSEMBLY__ - -/* Enable interrupt handling for interrupt IRQ. */ -static inline void v850e_intc_enable_irq (unsigned irq) -{ - __asm__ __volatile__ ("clr1 %0, [%1]" - :: "r" (V850E_INTC_IMR_BIT (irq)), - "r" (V850E_INTC_IMR_ADDR (irq)) - : "memory"); -} - -/* Disable interrupt handling for interrupt IRQ. Note that any - interrupts received while disabled will be delivered once the - interrupt is enabled again, unless they are explicitly cleared using - `v850e_intc_clear_pending_irq'. */ -static inline void v850e_intc_disable_irq (unsigned irq) -{ - __asm__ __volatile__ ("set1 %0, [%1]" - :: "r" (V850E_INTC_IMR_BIT (irq)), - "r" (V850E_INTC_IMR_ADDR (irq)) - : "memory"); -} - -/* Return true if interrupt handling for interrupt IRQ is enabled. */ -static inline int v850e_intc_irq_enabled (unsigned irq) -{ - int rval; - __asm__ __volatile__ ("tst1 %1, [%2]; setf z, %0" - : "=r" (rval) - : "r" (V850E_INTC_IMR_BIT (irq)), - "r" (V850E_INTC_IMR_ADDR (irq))); - return rval; -} - -/* Disable irqs from 0 until LIMIT. LIMIT must be a multiple of 8. */ -static inline void _v850e_intc_disable_irqs (unsigned limit) -{ - unsigned long addr; - for (addr = V850E_INTC_IMR_BASE_ADDR; limit >= 8; addr++, limit -= 8) - *(char *)addr = 0xFF; -} - -/* Disable all irqs. This is purposely a macro, because NUM_MACH_IRQS - will be only be defined later. */ -#define v850e_intc_disable_irqs() _v850e_intc_disable_irqs (NUM_MACH_IRQS) - -/* Clear any pending interrupts for IRQ. */ -static inline void v850e_intc_clear_pending_irq (unsigned irq) -{ - __asm__ __volatile__ ("clr1 %0, 0[%1]" - :: "i" (V850E_INTC_IC_IF_BIT), - "r" (V850E_INTC_IC_ADDR (irq)) - : "memory"); -} - -/* Return true if interrupt IRQ is pending (but disabled). */ -static inline int v850e_intc_irq_pending (unsigned irq) -{ - int rval; - __asm__ __volatile__ ("tst1 %1, 0[%2]; setf nz, %0" - : "=r" (rval) - : "i" (V850E_INTC_IC_IF_BIT), - "r" (V850E_INTC_IC_ADDR (irq))); - return rval; -} - - -struct v850e_intc_irq_init { - const char *name; /* name of interrupt type */ - - /* Range of kernel irq numbers for this type: - BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM */ - unsigned base, num, interval; - - unsigned priority; /* interrupt priority to assign */ -}; -struct hw_interrupt_type; /* fwd decl */ - -/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array - INITS (which is terminated by an entry with the name field == 0). */ -extern void v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits, - struct hw_interrupt_type *hw_irq_types); - - -#endif /* !__ASSEMBLY__ */ - - -#endif /* __V850_V850E_INTC_H__ */ diff --git a/include/asm-v850/v850e_timer_c.h b/include/asm-v850/v850e_timer_c.h deleted file mode 100644 index f70575df6ea..00000000000 --- a/include/asm-v850/v850e_timer_c.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * include/asm-v850/v850e_timer_c.h -- `Timer C' component often used - * with the V850E cpu core - * - * Copyright (C) 2001,03 NEC Electronics Corporation - * Copyright (C) 2001,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -/* NOTE: this include file currently contains only enough to allow us to - use timer C as an interrupt pass-through. */ - -#ifndef __V850_V850E_TIMER_C_H__ -#define __V850_V850E_TIMER_C_H__ - -#include <asm/types.h> -#include <asm/machdep.h> /* Pick up chip-specific defs. */ - - -/* Timer C (16-bit interval timers). */ - -/* Control register 0 for timer C. */ -#define V850E_TIMER_C_TMCC0_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x6 + 0x10 *(n)) -#define V850E_TIMER_C_TMCC0(n) (*(volatile u8 *)V850E_TIMER_C_TMCC0_ADDR(n)) -#define V850E_TIMER_C_TMCC0_CAE 0x01 /* clock action enable */ -#define V850E_TIMER_C_TMCC0_CE 0x02 /* count enable */ -/* ... */ - -/* Control register 1 for timer C. */ -#define V850E_TIMER_C_TMCC1_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x8 + 0x10 *(n)) -#define V850E_TIMER_C_TMCC1(n) (*(volatile u8 *)V850E_TIMER_C_TMCC1_ADDR(n)) -#define V850E_TIMER_C_TMCC1_CMS0 0x01 /* capture/compare mode select (ccc0) */ -#define V850E_TIMER_C_TMCC1_CMS1 0x02 /* capture/compare mode select (ccc1) */ -/* ... */ - -/* Interrupt edge-sensitivity control for timer C. */ -#define V850E_TIMER_C_SESC_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x9 + 0x10 *(n)) -#define V850E_TIMER_C_SESC(n) (*(volatile u8 *)V850E_TIMER_C_SESC_ADDR(n)) - -/* ...etc... */ - - -#endif /* __V850_V850E_TIMER_C_H__ */ diff --git a/include/asm-v850/v850e_timer_d.h b/include/asm-v850/v850e_timer_d.h deleted file mode 100644 index 417612c5b22..00000000000 --- a/include/asm-v850/v850e_timer_d.h +++ /dev/null @@ -1,62 +0,0 @@ -/* - * include/asm-v850/v850e_timer_d.h -- `Timer D' component often used - * with the V850E cpu core - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_V850E_TIMER_D_H__ -#define __V850_V850E_TIMER_D_H__ - -#include <asm/types.h> -#include <asm/machdep.h> /* Pick up chip-specific defs. */ - - -/* Timer D (16-bit interval timers). */ - -/* Count registers for timer D. */ -#define V850E_TIMER_D_TMD_ADDR(n) (V850E_TIMER_D_TMD_BASE_ADDR + 0x10 * (n)) -#define V850E_TIMER_D_TMD(n) (*(volatile u16 *)V850E_TIMER_D_TMD_ADDR(n)) - -/* Count compare registers for timer D. */ -#define V850E_TIMER_D_CMD_ADDR(n) (V850E_TIMER_D_CMD_BASE_ADDR + 0x10 * (n)) -#define V850E_TIMER_D_CMD(n) (*(volatile u16 *)V850E_TIMER_D_CMD_ADDR(n)) - -/* Control registers for timer D. */ -#define V850E_TIMER_D_TMCD_ADDR(n) (V850E_TIMER_D_TMCD_BASE_ADDR + 0x10 * (n)) -#define V850E_TIMER_D_TMCD(n) (*(volatile u8 *)V850E_TIMER_D_TMCD_ADDR(n)) -/* Control bits for timer D. */ -#define V850E_TIMER_D_TMCD_CE 0x2 /* count enable */ -#define V850E_TIMER_D_TMCD_CAE 0x1 /* clock action enable */ -/* Clock divider setting (log2). */ -#define V850E_TIMER_D_TMCD_CS(divlog2) (((divlog2) - V850E_TIMER_D_TMCD_CS_MIN) << 4) -/* Minimum clock divider setting (log2). */ -#ifndef V850E_TIMER_D_TMCD_CS_MIN /* Can be overridden by mach-specific hdrs */ -#define V850E_TIMER_D_TMCD_CS_MIN 2 /* Default is correct for the v850e/ma1 */ -#endif -/* Maximum clock divider setting (log2). */ -#define V850E_TIMER_D_TMCD_CS_MAX (V850E_TIMER_D_TMCD_CS_MIN + 7) - -/* Return the clock-divider (log2) of timer D unit N. */ -#define V850E_TIMER_D_DIVLOG2(n) \ - (((V850E_TIMER_D_TMCD(n) >> 4) & 0x7) + V850E_TIMER_D_TMCD_CS_MIN) - - -#ifndef __ASSEMBLY__ - -/* Start interval timer TIMER (0-3). The timer will issue the - corresponding INTCMD interrupt RATE times per second. This function - does not enable the interrupt. */ -extern void v850e_timer_d_configure (unsigned timer, unsigned rate); - -#endif /* !__ASSEMBLY__ */ - - -#endif /* __V850_V850E_TIMER_D_H__ */ diff --git a/include/asm-v850/v850e_uart.h b/include/asm-v850/v850e_uart.h deleted file mode 100644 index 5182fb4cc98..00000000000 --- a/include/asm-v850/v850e_uart.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * include/asm-v850/v850e_uart.h -- common V850E on-chip UART driver - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -/* There's not actually a single UART implementation used by V850E CPUs, - but rather a series of implementations that are all `close' to one - another. This file corresponds to the single driver which handles all - of them. */ - -#ifndef __V850_V850E_UART_H__ -#define __V850_V850E_UART_H__ - -#include <linux/termios.h> - -#include <asm/v850e_utils.h> -#include <asm/types.h> -#include <asm/machdep.h> /* Pick up chip-specific defs. */ - - -/* Include model-specific definitions. */ -#ifdef CONFIG_V850E_UART -# ifdef CONFIG_V850E_UARTB -# include <asm-v850/v850e_uartb.h> -# else -# include <asm-v850/v850e_uarta.h> /* original V850E UART */ -# endif -#endif - - -/* Optional capabilities some hardware provides. */ - -/* This UART doesn't implement RTS/CTS by default, but some platforms - implement them externally, so check to see if <asm/machdep.h> defined - anything. */ -#ifdef V850E_UART_CTS -#define v850e_uart_cts(n) V850E_UART_CTS(n) -#else -#define v850e_uart_cts(n) (1) -#endif - -/* Do the same for RTS. */ -#ifdef V850E_UART_SET_RTS -#define v850e_uart_set_rts(n,v) V850E_UART_SET_RTS(n,v) -#else -#define v850e_uart_set_rts(n,v) ((void)0) -#endif - - -/* This is the serial channel to use for the boot console (if desired). */ -#ifndef V850E_UART_CONSOLE_CHANNEL -# define V850E_UART_CONSOLE_CHANNEL 0 -#endif - - -#ifndef __ASSEMBLY__ - -/* Setup a console using channel 0 of the builtin uart. */ -extern void v850e_uart_cons_init (unsigned chan); - -/* Configure and turn on uart channel CHAN, using the termios `control - modes' bits in CFLAGS, and a baud-rate of BAUD. */ -void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud); - -#endif /* !__ASSEMBLY__ */ - - -#endif /* __V850_V850E_UART_H__ */ diff --git a/include/asm-v850/v850e_uarta.h b/include/asm-v850/v850e_uarta.h deleted file mode 100644 index e483e095072..00000000000 --- a/include/asm-v850/v850e_uarta.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - * include/asm-v850/v850e_uarta.h -- original V850E on-chip UART - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -/* This is the original V850E UART implementation is called just `UART' in - the docs, but we name this header file <asm/v850e_uarta.h> because the - name <asm/v850e_uart.h> is used for the common driver that handles both - `UART' and `UARTB' implementations. */ - -#ifndef __V850_V850E_UARTA_H__ -#define __V850_V850E_UARTA_H__ - - -/* Raw hardware interface. */ - -/* The base address of the UART control registers for channel N. - The default is the address used on the V850E/MA1. */ -#ifndef V850E_UART_BASE_ADDR -#define V850E_UART_BASE_ADDR(n) (0xFFFFFA00 + 0x10 * (n)) -#endif - -/* Addresses of specific UART control registers for channel N. - The defaults are the addresses used on the V850E/MA1; if a platform - wants to redefine any of these, it must redefine them all. */ -#ifndef V850E_UART_ASIM_ADDR -#define V850E_UART_ASIM_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x0) -#define V850E_UART_RXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x2) -#define V850E_UART_ASIS_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x3) -#define V850E_UART_TXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x4) -#define V850E_UART_ASIF_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x5) -#define V850E_UART_CKSR_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x6) -#define V850E_UART_BRGC_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x7) -#endif - -/* UART config registers. */ -#define V850E_UART_ASIM(n) (*(volatile u8 *)V850E_UART_ASIM_ADDR(n)) -/* Control bits for config registers. */ -#define V850E_UART_ASIM_CAE 0x80 /* clock enable */ -#define V850E_UART_ASIM_TXE 0x40 /* transmit enable */ -#define V850E_UART_ASIM_RXE 0x20 /* receive enable */ -#define V850E_UART_ASIM_PS_MASK 0x18 /* mask covering parity-select bits */ -#define V850E_UART_ASIM_PS_NONE 0x00 /* no parity */ -#define V850E_UART_ASIM_PS_ZERO 0x08 /* zero parity */ -#define V850E_UART_ASIM_PS_ODD 0x10 /* odd parity */ -#define V850E_UART_ASIM_PS_EVEN 0x18 /* even parity */ -#define V850E_UART_ASIM_CL_8 0x04 /* char len is 8 bits (otherwise, 7) */ -#define V850E_UART_ASIM_SL_2 0x02 /* 2 stop bits (otherwise, 1) */ -#define V850E_UART_ASIM_ISRM 0x01 /* generate INTSR interrupt on errors - (otherwise, generate INTSER) */ - -/* UART serial interface status registers. */ -#define V850E_UART_ASIS(n) (*(volatile u8 *)V850E_UART_ASIS_ADDR(n)) -/* Control bits for status registers. */ -#define V850E_UART_ASIS_PE 0x04 /* parity error */ -#define V850E_UART_ASIS_FE 0x02 /* framing error */ -#define V850E_UART_ASIS_OVE 0x01 /* overrun error */ - -/* UART serial interface transmission status registers. */ -#define V850E_UART_ASIF(n) (*(volatile u8 *)V850E_UART_ASIF_ADDR(n)) -#define V850E_UART_ASIF_TXBF 0x02 /* transmit buffer flag (data in TXB) */ -#define V850E_UART_ASIF_TXSF 0x01 /* transmit shift flag (sending data) */ - -/* UART receive buffer register. */ -#define V850E_UART_RXB(n) (*(volatile u8 *)V850E_UART_RXB_ADDR(n)) - -/* UART transmit buffer register. */ -#define V850E_UART_TXB(n) (*(volatile u8 *)V850E_UART_TXB_ADDR(n)) - -/* UART baud-rate generator control registers. */ -#define V850E_UART_CKSR(n) (*(volatile u8 *)V850E_UART_CKSR_ADDR(n)) -#define V850E_UART_CKSR_MAX 11 -#define V850E_UART_BRGC(n) (*(volatile u8 *)V850E_UART_BRGC_ADDR(n)) -#define V850E_UART_BRGC_MIN 8 - - -#ifndef V850E_UART_CKSR_MAX_FREQ -#define V850E_UART_CKSR_MAX_FREQ (25*1000*1000) -#endif - -/* Calculate the minimum value for CKSR on this processor. */ -static inline unsigned v850e_uart_cksr_min (void) -{ - int min = 0; - unsigned freq = V850E_UART_BASE_FREQ; - while (freq > V850E_UART_CKSR_MAX_FREQ) { - freq >>= 1; - min++; - } - return min; -} - - -/* Slightly abstract interface used by driver. */ - - -/* Interrupts used by the UART. */ - -/* Received when the most recently transmitted character has been sent. */ -#define V850E_UART_TX_IRQ(chan) IRQ_INTST (chan) -/* Received when a new character has been received. */ -#define V850E_UART_RX_IRQ(chan) IRQ_INTSR (chan) - - -/* UART clock generator interface. */ - -/* This type encapsulates a particular uart frequency. */ -typedef struct { - unsigned clk_divlog2; - unsigned brgen_count; -} v850e_uart_speed_t; - -/* Calculate a uart speed from BAUD for this uart. */ -static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud) -{ - v850e_uart_speed_t speed; - - /* Calculate the log2 clock divider and baud-rate counter values - (note that the UART divides the resulting clock by 2, so - multiply BAUD by 2 here to compensate). */ - calc_counter_params (V850E_UART_BASE_FREQ, baud * 2, - v850e_uart_cksr_min(), - V850E_UART_CKSR_MAX, 8/*bits*/, - &speed.clk_divlog2, &speed.brgen_count); - - return speed; -} - -/* Return the current speed of uart channel CHAN. */ -static inline v850e_uart_speed_t v850e_uart_speed (unsigned chan) -{ - v850e_uart_speed_t speed; - speed.clk_divlog2 = V850E_UART_CKSR (chan); - speed.brgen_count = V850E_UART_BRGC (chan); - return speed; -} - -/* Set the current speed of uart channel CHAN. */ -static inline void v850e_uart_set_speed(unsigned chan,v850e_uart_speed_t speed) -{ - V850E_UART_CKSR (chan) = speed.clk_divlog2; - V850E_UART_BRGC (chan) = speed.brgen_count; -} - -static inline int -v850e_uart_speed_eq (v850e_uart_speed_t speed1, v850e_uart_speed_t speed2) -{ - return speed1.clk_divlog2 == speed2.clk_divlog2 - && speed1.brgen_count == speed2.brgen_count; -} - -/* Minimum baud rate possible. */ -#define v850e_uart_min_baud() \ - ((V850E_UART_BASE_FREQ >> V850E_UART_CKSR_MAX) / (2 * 255) + 1) - -/* Maximum baud rate possible. The error is quite high at max, though. */ -#define v850e_uart_max_baud() \ - ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / (2 *V850E_UART_BRGC_MIN)) - -/* The `maximum' clock rate the uart can used, which is wanted (though not - really used in any useful way) by the serial framework. */ -#define v850e_uart_max_clock() \ - ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / 2) - - -/* UART configuration interface. */ - -/* Type of the uart config register; must be a scalar. */ -typedef u16 v850e_uart_config_t; - -/* The uart hardware config register for channel CHAN. */ -#define V850E_UART_CONFIG(chan) V850E_UART_ASIM (chan) - -/* This config bit set if the uart is enabled. */ -#define V850E_UART_CONFIG_ENABLED V850E_UART_ASIM_CAE -/* If the uart _isn't_ enabled, store this value to it to do so. */ -#define V850E_UART_CONFIG_INIT V850E_UART_ASIM_CAE -/* Store this config value to disable the uart channel completely. */ -#define V850E_UART_CONFIG_FINI 0 - -/* Setting/clearing these bits enable/disable TX/RX, respectively (but - otherwise generally leave things running). */ -#define V850E_UART_CONFIG_RX_ENABLE V850E_UART_ASIM_RXE -#define V850E_UART_CONFIG_TX_ENABLE V850E_UART_ASIM_TXE - -/* These masks define which config bits affect TX/RX modes, respectively. */ -#define V850E_UART_CONFIG_RX_BITS \ - (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_ISRM) -#define V850E_UART_CONFIG_TX_BITS \ - (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_SL_2) - -static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags) -{ - v850e_uart_config_t config = 0; - - /* Figure out new configuration of control register. */ - if (cflags & CSTOPB) - /* Number of stop bits, 1 or 2. */ - config |= V850E_UART_ASIM_SL_2; - if ((cflags & CSIZE) == CS8) - /* Number of data bits, 7 or 8. */ - config |= V850E_UART_ASIM_CL_8; - if (! (cflags & PARENB)) - /* No parity check/generation. */ - config |= V850E_UART_ASIM_PS_NONE; - else if (cflags & PARODD) - /* Odd parity check/generation. */ - config |= V850E_UART_ASIM_PS_ODD; - else - /* Even parity check/generation. */ - config |= V850E_UART_ASIM_PS_EVEN; - if (cflags & CREAD) - /* Reading enabled. */ - config |= V850E_UART_ASIM_RXE; - - config |= V850E_UART_ASIM_CAE; - config |= V850E_UART_ASIM_TXE; /* Writing is always enabled. */ - config |= V850E_UART_ASIM_ISRM; /* Errors generate a read-irq. */ - - return config; -} - -/* This should delay as long as necessary for a recently written config - setting to settle, before we turn the uart back on. */ -static inline void -v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed) -{ - /* The UART may not be reset properly unless we wait at least 2 - `basic-clocks' until turning on the TXE/RXE bits again. - A `basic clock' is the clock used by the baud-rate generator, - i.e., the cpu clock divided by the 2^new_clk_divlog2. - The loop takes 2 insns, so loop CYCLES / 2 times. */ - register unsigned count = 1 << speed.clk_divlog2; - while (--count != 0) - /* nothing */; -} - - -/* RX/TX interface. */ - -/* Return true if all characters awaiting transmission on uart channel N - have been transmitted. */ -#define v850e_uart_xmit_done(n) \ - (! (V850E_UART_ASIF(n) & V850E_UART_ASIF_TXBF)) -/* Wait for this to be true. */ -#define v850e_uart_wait_for_xmit_done(n) \ - do { } while (! v850e_uart_xmit_done (n)) - -/* Return true if uart channel N is ready to transmit a character. */ -#define v850e_uart_xmit_ok(n) \ - (v850e_uart_xmit_done(n) && v850e_uart_cts(n)) -/* Wait for this to be true. */ -#define v850e_uart_wait_for_xmit_ok(n) \ - do { } while (! v850e_uart_xmit_ok (n)) - -/* Write character CH to uart channel CHAN. */ -#define v850e_uart_putc(chan, ch) (V850E_UART_TXB(chan) = (ch)) - -/* Return latest character read on channel CHAN. */ -#define v850e_uart_getc(chan) V850E_UART_RXB (chan) - -/* Return bit-mask of uart error status. */ -#define v850e_uart_err(chan) V850E_UART_ASIS (chan) -/* Various error bits set in the error result. */ -#define V850E_UART_ERR_OVERRUN V850E_UART_ASIS_OVE -#define V850E_UART_ERR_FRAME V850E_UART_ASIS_FE -#define V850E_UART_ERR_PARITY V850E_UART_ASIS_PE - - -#endif /* __V850_V850E_UARTA_H__ */ diff --git a/include/asm-v850/v850e_uartb.h b/include/asm-v850/v850e_uartb.h deleted file mode 100644 index 6d4767d5a83..00000000000 --- a/include/asm-v850/v850e_uartb.h +++ /dev/null @@ -1,262 +0,0 @@ -/* - * include/asm-v850/v850e_uartb.h -- V850E on-chip `UARTB' UART - * - * Copyright (C) 2001,02,03 NEC Electronics Corporation - * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -/* The V850E UARTB is basically a superset of the original V850E UART, but - even where it's the same, the names and details have changed a bit. - It's similar enough to use the same driver (v850e_uart.c), but the - details have been abstracted slightly to do so. */ - -#ifndef __V850_V850E_UARTB_H__ -#define __V850_V850E_UARTB_H__ - - -/* Raw hardware interface. */ - -#define V850E_UARTB_BASE_ADDR(n) (0xFFFFFA00 + 0x10 * (n)) - -/* Addresses of specific UART control registers for channel N. */ -#define V850E_UARTB_CTL0_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x0) -#define V850E_UARTB_CTL2_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x2) -#define V850E_UARTB_STR_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x4) -#define V850E_UARTB_RX_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x6) -#define V850E_UARTB_RXAP_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x6) -#define V850E_UARTB_TX_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x8) -#define V850E_UARTB_FIC0_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0xA) -#define V850E_UARTB_FIC1_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0xB) -#define V850E_UARTB_FIC2_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0xC) -#define V850E_UARTB_FIS0_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0xE) -#define V850E_UARTB_FIS1_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0xF) - -/* UARTB control register 0 (general config). */ -#define V850E_UARTB_CTL0(n) (*(volatile u8 *)V850E_UARTB_CTL0_ADDR(n)) -/* Control bits for config registers. */ -#define V850E_UARTB_CTL0_PWR 0x80 /* clock enable */ -#define V850E_UARTB_CTL0_TXE 0x40 /* transmit enable */ -#define V850E_UARTB_CTL0_RXE 0x20 /* receive enable */ -#define V850E_UARTB_CTL0_DIR 0x10 /* */ -#define V850E_UARTB_CTL0_PS1 0x08 /* parity */ -#define V850E_UARTB_CTL0_PS0 0x04 /* parity */ -#define V850E_UARTB_CTL0_CL 0x02 /* char len 1:8bit, 0:7bit */ -#define V850E_UARTB_CTL0_SL 0x01 /* stop bit 1:2bit, 0:1bit */ -#define V850E_UARTB_CTL0_PS_MASK 0x0C /* mask covering parity bits */ -#define V850E_UARTB_CTL0_PS_NONE 0x00 /* no parity */ -#define V850E_UARTB_CTL0_PS_ZERO 0x04 /* zero parity */ -#define V850E_UARTB_CTL0_PS_ODD 0x08 /* odd parity */ -#define V850E_UARTB_CTL0_PS_EVEN 0x0C /* even parity */ -#define V850E_UARTB_CTL0_CL_8 0x02 /* char len 1:8bit, 0:7bit */ -#define V850E_UARTB_CTL0_SL_2 0x01 /* stop bit 1:2bit, 0:1bit */ - -/* UARTB control register 2 (clock divider). */ -#define V850E_UARTB_CTL2(n) (*(volatile u16 *)V850E_UARTB_CTL2_ADDR(n)) -#define V850E_UARTB_CTL2_MIN 4 -#define V850E_UARTB_CTL2_MAX 0xFFFF - -/* UARTB serial interface status register. */ -#define V850E_UARTB_STR(n) (*(volatile u8 *)V850E_UARTB_STR_ADDR(n)) -/* Control bits for status registers. */ -#define V850E_UARTB_STR_TSF 0x80 /* UBTX or FIFO exist data */ -#define V850E_UARTB_STR_OVF 0x08 /* overflow error */ -#define V850E_UARTB_STR_PE 0x04 /* parity error */ -#define V850E_UARTB_STR_FE 0x02 /* framing error */ -#define V850E_UARTB_STR_OVE 0x01 /* overrun error */ - -/* UARTB receive data register. */ -#define V850E_UARTB_RX(n) (*(volatile u8 *)V850E_UARTB_RX_ADDR(n)) -#define V850E_UARTB_RXAP(n) (*(volatile u16 *)V850E_UARTB_RXAP_ADDR(n)) -/* Control bits for status registers. */ -#define V850E_UARTB_RXAP_PEF 0x0200 /* parity error */ -#define V850E_UARTB_RXAP_FEF 0x0100 /* framing error */ - -/* UARTB transmit data register. */ -#define V850E_UARTB_TX(n) (*(volatile u8 *)V850E_UARTB_TX_ADDR(n)) - -/* UARTB FIFO control register 0. */ -#define V850E_UARTB_FIC0(n) (*(volatile u8 *)V850E_UARTB_FIC0_ADDR(n)) - -/* UARTB FIFO control register 1. */ -#define V850E_UARTB_FIC1(n) (*(volatile u8 *)V850E_UARTB_FIC1_ADDR(n)) - -/* UARTB FIFO control register 2. */ -#define V850E_UARTB_FIC2(n) (*(volatile u16 *)V850E_UARTB_FIC2_ADDR(n)) - -/* UARTB FIFO status register 0. */ -#define V850E_UARTB_FIS0(n) (*(volatile u8 *)V850E_UARTB_FIS0_ADDR(n)) - -/* UARTB FIFO status register 1. */ -#define V850E_UARTB_FIS1(n) (*(volatile u8 *)V850E_UARTB_FIS1_ADDR(n)) - - -/* Slightly abstract interface used by driver. */ - - -/* Interrupts used by the UART. */ - -/* Received when the most recently transmitted character has been sent. */ -#define V850E_UART_TX_IRQ(chan) IRQ_INTUBTIT (chan) -/* Received when a new character has been received. */ -#define V850E_UART_RX_IRQ(chan) IRQ_INTUBTIR (chan) - -/* Use by serial driver for information purposes. */ -#define V850E_UART_BASE_ADDR(chan) V850E_UARTB_BASE_ADDR(chan) - - -/* UART clock generator interface. */ - -/* This type encapsulates a particular uart frequency. */ -typedef u16 v850e_uart_speed_t; - -/* Calculate a uart speed from BAUD for this uart. */ -static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud) -{ - v850e_uart_speed_t speed; - - /* - * V850E/ME2 UARTB baud rate is determined by the value of UBCTL2 - * fx = V850E_UARTB_BASE_FREQ = CPU_CLOCK_FREQ/4 - * baud = fx / 2*speed [ speed >= 4 ] - */ - speed = V850E_UARTB_CTL2_MIN; - while (((V850E_UARTB_BASE_FREQ / 2) / speed ) > baud) - speed++; - - return speed; -} - -/* Return the current speed of uart channel CHAN. */ -#define v850e_uart_speed(chan) V850E_UARTB_CTL2 (chan) - -/* Set the current speed of uart channel CHAN. */ -#define v850e_uart_set_speed(chan, speed) (V850E_UARTB_CTL2 (chan) = (speed)) - -/* Return true if SPEED1 and SPEED2 are the same. */ -#define v850e_uart_speed_eq(speed1, speed2) ((speed1) == (speed2)) - -/* Minimum baud rate possible. */ -#define v850e_uart_min_baud() \ - ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MAX) - -/* Maximum baud rate possible. The error is quite high at max, though. */ -#define v850e_uart_max_baud() \ - ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MIN) - -/* The `maximum' clock rate the uart can used, which is wanted (though not - really used in any useful way) by the serial framework. */ -#define v850e_uart_max_clock() \ - (V850E_UARTB_BASE_FREQ / 2) - - -/* UART configuration interface. */ - -/* Type of the uart config register; must be a scalar. */ -typedef u16 v850e_uart_config_t; - -/* The uart hardware config register for channel CHAN. */ -#define V850E_UART_CONFIG(chan) V850E_UARTB_CTL0 (chan) - -/* This config bit set if the uart is enabled. */ -#define V850E_UART_CONFIG_ENABLED V850E_UARTB_CTL0_PWR -/* If the uart _isn't_ enabled, store this value to it to do so. */ -#define V850E_UART_CONFIG_INIT V850E_UARTB_CTL0_PWR -/* Store this config value to disable the uart channel completely. */ -#define V850E_UART_CONFIG_FINI 0 - -/* Setting/clearing these bits enable/disable TX/RX, respectively (but - otherwise generally leave things running). */ -#define V850E_UART_CONFIG_RX_ENABLE V850E_UARTB_CTL0_RXE -#define V850E_UART_CONFIG_TX_ENABLE V850E_UARTB_CTL0_TXE - -/* These masks define which config bits affect TX/RX modes, respectively. */ -#define V850E_UART_CONFIG_RX_BITS \ - (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8) -#define V850E_UART_CONFIG_TX_BITS \ - (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8 | V850E_UARTB_CTL0_SL_2) - -static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags) -{ - v850e_uart_config_t config = 0; - - /* Figure out new configuration of control register. */ - if (cflags & CSTOPB) - /* Number of stop bits, 1 or 2. */ - config |= V850E_UARTB_CTL0_SL_2; - if ((cflags & CSIZE) == CS8) - /* Number of data bits, 7 or 8. */ - config |= V850E_UARTB_CTL0_CL_8; - if (! (cflags & PARENB)) - /* No parity check/generation. */ - config |= V850E_UARTB_CTL0_PS_NONE; - else if (cflags & PARODD) - /* Odd parity check/generation. */ - config |= V850E_UARTB_CTL0_PS_ODD; - else - /* Even parity check/generation. */ - config |= V850E_UARTB_CTL0_PS_EVEN; - if (cflags & CREAD) - /* Reading enabled. */ - config |= V850E_UARTB_CTL0_RXE; - - config |= V850E_UARTB_CTL0_PWR; - config |= V850E_UARTB_CTL0_TXE; /* Writing is always enabled. */ - config |= V850E_UARTB_CTL0_DIR; /* LSB first. */ - - return config; -} - -/* This should delay as long as necessary for a recently written config - setting to settle, before we turn the uart back on. */ -static inline void -v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed) -{ - /* The UART may not be reset properly unless we wait at least 2 - `basic-clocks' until turning on the TXE/RXE bits again. - A `basic clock' is the clock used by the baud-rate generator, - i.e., the cpu clock divided by the 2^new_clk_divlog2. - The loop takes 2 insns, so loop CYCLES / 2 times. */ - register unsigned count = 1 << speed; - while (--count != 0) - /* nothing */; -} - - -/* RX/TX interface. */ - -/* Return true if all characters awaiting transmission on uart channel N - have been transmitted. */ -#define v850e_uart_xmit_done(n) \ - (! (V850E_UARTB_STR(n) & V850E_UARTB_STR_TSF)) -/* Wait for this to be true. */ -#define v850e_uart_wait_for_xmit_done(n) \ - do { } while (! v850e_uart_xmit_done (n)) - -/* Return true if uart channel N is ready to transmit a character. */ -#define v850e_uart_xmit_ok(n) \ - (v850e_uart_xmit_done(n) && v850e_uart_cts(n)) -/* Wait for this to be true. */ -#define v850e_uart_wait_for_xmit_ok(n) \ - do { } while (! v850e_uart_xmit_ok (n)) - -/* Write character CH to uart channel CHAN. */ -#define v850e_uart_putc(chan, ch) (V850E_UARTB_TX(chan) = (ch)) - -/* Return latest character read on channel CHAN. */ -#define v850e_uart_getc(chan) V850E_UARTB_RX (chan) - -/* Return bit-mask of uart error status. */ -#define v850e_uart_err(chan) V850E_UARTB_STR (chan) -/* Various error bits set in the error result. */ -#define V850E_UART_ERR_OVERRUN V850E_UARTB_STR_OVE -#define V850E_UART_ERR_FRAME V850E_UARTB_STR_FE -#define V850E_UART_ERR_PARITY V850E_UARTB_STR_PE - - -#endif /* __V850_V850E_UARTB_H__ */ diff --git a/include/asm-v850/v850e_utils.h b/include/asm-v850/v850e_utils.h deleted file mode 100644 index 52eb72822d3..00000000000 --- a/include/asm-v850/v850e_utils.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * include/asm-v850/v850e_utils.h -- Utility functions associated with - * V850E CPUs - * - * Copyright (C) 2001,03 NEC Electronics Corporation - * Copyright (C) 2001,03 Miles Bader <miles@gnu.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file COPYING in the main directory of this - * archive for more details. - * - * Written by Miles Bader <miles@gnu.org> - */ - -#ifndef __V850_V850E_UTILS_H__ -#define __V850_V850E_UTILS_H__ - -/* Calculate counter clock-divider and count values to attain the - desired frequency RATE from the base frequency BASE_FREQ. The - counter is expected to have a clock-divider, which can divide the - system cpu clock by a power of two value from MIN_DIVLOG2 to - MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter - counts up and resets whenever it's equal to the compare register, - generating an interrupt or whatever when it does so). The returned - values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT - -- the counter compare value to use. Returns true if it was possible - to find a reasonable value, otherwise false (and the other return - values will be set to be as good as possible). */ -extern int calc_counter_params (unsigned long base_freq, - unsigned long rate, - unsigned min_divlog2, unsigned max_divlog2, - unsigned counter_size, - unsigned *divlog2, unsigned *count); - -#endif /* __V850_V850E_UTILS_H__ */ diff --git a/include/asm-x86/hugetlb.h b/include/asm-x86/hugetlb.h index 14171a4924f..439a9acc132 100644 --- a/include/asm-x86/hugetlb.h +++ b/include/asm-x86/hugetlb.h @@ -14,11 +14,13 @@ static inline int is_hugepage_only_range(struct mm_struct *mm, * If the arch doesn't supply something else, assume that hugepage * size aligned regions are ok without further preparation. */ -static inline int prepare_hugepage_range(unsigned long addr, unsigned long len) +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) { - if (len & ~HPAGE_MASK) + struct hstate *h = hstate_file(file); + if (len & ~huge_page_mask(h)) return -EINVAL; - if (addr & ~HPAGE_MASK) + if (addr & ~huge_page_mask(h)) return -EINVAL; return 0; } @@ -26,7 +28,7 @@ static inline int prepare_hugepage_range(unsigned long addr, unsigned long len) static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) { } -static inline void hugetlb_free_pgd_range(struct mmu_gather **tlb, +static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, unsigned long end, unsigned long floor, unsigned long ceiling) diff --git a/include/asm-x86/io_32.h b/include/asm-x86/io_32.h index 4df44ed5407..e876d89ac15 100644 --- a/include/asm-x86/io_32.h +++ b/include/asm-x86/io_32.h @@ -110,6 +110,8 @@ static inline void *phys_to_virt(unsigned long address) */ extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size); extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size); +extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size, + unsigned long prot_val); /* * The default ioremap() behavior is non-cached: diff --git a/include/asm-x86/io_64.h b/include/asm-x86/io_64.h index ddd8058a502..22995c5c5ad 100644 --- a/include/asm-x86/io_64.h +++ b/include/asm-x86/io_64.h @@ -175,6 +175,8 @@ extern void early_iounmap(void *addr, unsigned long size); */ extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size); extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size); +extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size, + unsigned long prot_val); /* * The default ioremap() behavior is non-cached: diff --git a/include/asm-x86/ipi.h b/include/asm-x86/ipi.h index 196d63c28aa..bb1c09f7a76 100644 --- a/include/asm-x86/ipi.h +++ b/include/asm-x86/ipi.h @@ -122,7 +122,7 @@ static inline void send_IPI_mask_sequence(cpumask_t mask, int vector) * - mbligh */ local_irq_save(flags); - for_each_cpu_mask(query_cpu, mask) { + for_each_cpu_mask_nr(query_cpu, mask) { __send_IPI_dest_field(per_cpu(x86_cpu_to_apicid, query_cpu), vector, APIC_DEST_PHYSICAL); } diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h index 6c846228948..49982110e4d 100644 --- a/include/asm-x86/page.h +++ b/include/asm-x86/page.h @@ -32,8 +32,7 @@ #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) +#define HUGE_MAX_HSTATE 2 #ifndef __ASSEMBLY__ #include <linux/types.h> diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index 15cb82a44e8..5f58da401b4 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -134,7 +134,7 @@ extern __u32 cleared_cpu_caps[NCAPINTS]; #ifdef CONFIG_SMP DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info); #define cpu_data(cpu) per_cpu(cpu_info, cpu) -#define current_cpu_data cpu_data(smp_processor_id()) +#define current_cpu_data __get_cpu_var(cpu_info) #else #define cpu_data(cpu) boot_cpu_data #define current_cpu_data boot_cpu_data diff --git a/include/asm-x86/thread_info.h b/include/asm-x86/thread_info.h index 0a8f27d31d0..3f2de105098 100644 --- a/include/asm-x86/thread_info.h +++ b/include/asm-x86/thread_info.h @@ -79,7 +79,6 @@ struct thread_info { #define TIF_SYSCALL_AUDIT 7 /* syscall auditing active */ #define TIF_SECCOMP 8 /* secure computing */ #define TIF_MCE_NOTIFY 10 /* notify userspace of an MCE */ -#define TIF_HRTICK_RESCHED 11 /* reprogram hrtick timer */ #define TIF_NOTSC 16 /* TSC is not accessible in userland */ #define TIF_IA32 17 /* 32bit process */ #define TIF_FORK 18 /* ret_from_fork */ @@ -102,7 +101,6 @@ struct thread_info { #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) #define _TIF_MCE_NOTIFY (1 << TIF_MCE_NOTIFY) -#define _TIF_HRTICK_RESCHED (1 << TIF_HRTICK_RESCHED) #define _TIF_NOTSC (1 << TIF_NOTSC) #define _TIF_IA32 (1 << TIF_IA32) #define _TIF_FORK (1 << TIF_FORK) @@ -135,7 +133,7 @@ struct thread_info { /* Only used for 64 bit */ #define _TIF_DO_NOTIFY_MASK \ - (_TIF_SIGPENDING|_TIF_MCE_NOTIFY|_TIF_HRTICK_RESCHED) + (_TIF_SIGPENDING|_TIF_MCE_NOTIFY) /* flags to check in __switch_to() */ #define _TIF_WORK_CTXSW \ diff --git a/include/asm-x86/unistd_32.h b/include/asm-x86/unistd_32.h index 8317d94771d..d7394673b77 100644 --- a/include/asm-x86/unistd_32.h +++ b/include/asm-x86/unistd_32.h @@ -332,6 +332,12 @@ #define __NR_fallocate 324 #define __NR_timerfd_settime 325 #define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 #ifdef __KERNEL__ diff --git a/include/asm-x86/unistd_64.h b/include/asm-x86/unistd_64.h index 9c1a4a3470d..3a341d79179 100644 --- a/include/asm-x86/unistd_64.h +++ b/include/asm-x86/unistd_64.h @@ -639,6 +639,20 @@ __SYSCALL(__NR_fallocate, sys_fallocate) __SYSCALL(__NR_timerfd_settime, sys_timerfd_settime) #define __NR_timerfd_gettime 287 __SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime) +#define __NR_paccept 288 +__SYSCALL(__NR_paccept, sys_paccept) +#define __NR_signalfd4 289 +__SYSCALL(__NR_signalfd4, sys_signalfd4) +#define __NR_eventfd2 290 +__SYSCALL(__NR_eventfd2, sys_eventfd2) +#define __NR_epoll_create1 291 +__SYSCALL(__NR_epoll_create1, sys_epoll_create1) +#define __NR_dup3 292 +__SYSCALL(__NR_dup3, sys_dup3) +#define __NR_pipe2 293 +__SYSCALL(__NR_pipe2, sys_pipe2) +#define __NR_inotify_init1 294 +__SYSCALL(__NR_inotify_init1, sys_inotify_init1) #ifndef __NO_STUBS diff --git a/include/asm-xtensa/page.h b/include/asm-xtensa/page.h index 80a6ae0dd25..11f7dc2dbec 100644 --- a/include/asm-xtensa/page.h +++ b/include/asm-xtensa/page.h @@ -26,13 +26,11 @@ /* * PAGE_SHIFT determines the page size - * PAGE_ALIGN(x) aligns the pointer to the (next) page boundary */ #define PAGE_SHIFT 12 #define PAGE_SIZE (__XTENSA_UL_CONST(1) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE - 1) & PAGE_MASK) #define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR #define MAX_MEM_PFN XCHAL_KSEG_SIZE diff --git a/include/linux/acpi.h b/include/linux/acpi.h index a1717763937..702f79dad16 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -236,6 +236,7 @@ int acpi_check_mem_region(resource_size_t start, resource_size_t n, const char *name); #ifdef CONFIG_PM_SLEEP +void __init acpi_no_s4_hw_signature(void); void __init acpi_old_suspend_ordering(void); #endif /* CONFIG_PM_SLEEP */ #else /* CONFIG_ACPI */ diff --git a/include/linux/anon_inodes.h b/include/linux/anon_inodes.h index 6129e58ca7c..e0a0cdc2da4 100644 --- a/include/linux/anon_inodes.h +++ b/include/linux/anon_inodes.h @@ -9,7 +9,7 @@ #define _LINUX_ANON_INODES_H int anon_inode_getfd(const char *name, const struct file_operations *fops, - void *priv); + void *priv, int flags); #endif /* _LINUX_ANON_INODES_H */ diff --git a/include/linux/async_tx.h b/include/linux/async_tx.h index eb640f0acfa..0f50d4cc436 100644 --- a/include/linux/async_tx.h +++ b/include/linux/async_tx.h @@ -101,21 +101,14 @@ async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx, /** * async_tx_sync_epilog - actions to take if an operation is run synchronously - * @flags: async_tx flags - * @depend_tx: transaction depends on depend_tx * @cb_fn: function to call when the transaction completes * @cb_fn_param: parameter to pass to the callback routine */ static inline void -async_tx_sync_epilog(unsigned long flags, - struct dma_async_tx_descriptor *depend_tx, - dma_async_tx_callback cb_fn, void *cb_fn_param) +async_tx_sync_epilog(dma_async_tx_callback cb_fn, void *cb_fn_param) { if (cb_fn) cb_fn(cb_fn_param); - - if (depend_tx && (flags & ASYNC_TX_DEP_ACK)) - async_tx_ack(depend_tx); } void @@ -152,4 +145,6 @@ struct dma_async_tx_descriptor * async_trigger_callback(enum async_tx_flags flags, struct dma_async_tx_descriptor *depend_tx, dma_async_tx_callback cb_fn, void *cb_fn_param); + +void async_tx_quiesce(struct dma_async_tx_descriptor **tx); #endif /* _ASYNC_TX_H_ */ diff --git a/include/linux/atmel-pwm-bl.h b/include/linux/atmel-pwm-bl.h new file mode 100644 index 00000000000..0153a47806c --- /dev/null +++ b/include/linux/atmel-pwm-bl.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2007 Atmel Corporation + * + * Driver for the AT32AP700X PS/2 controller (PSIF). + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef __INCLUDE_ATMEL_PWM_BL_H +#define __INCLUDE_ATMEL_PWM_BL_H + +/** + * struct atmel_pwm_bl_platform_data + * @pwm_channel: which PWM channel in the PWM module to use. + * @pwm_frequency: PWM frequency to generate, the driver will try to be as + * close as the prescaler allows. + * @pwm_compare_max: value to use in the PWM channel compare register. + * @pwm_duty_max: maximum duty cycle value, must be less than or equal to + * pwm_compare_max. + * @pwm_duty_min: minimum duty cycle value, must be less than pwm_duty_max. + * @pwm_active_low: set to one if the low part of the PWM signal increases the + * brightness of the backlight. + * @gpio_on: GPIO line to control the backlight on/off, set to -1 if not used. + * @on_active_low: set to one if the on/off signal is on when GPIO is low. + * + * This struct must be added to the platform device in the board code. It is + * used by the atmel-pwm-bl driver to setup the GPIO to control on/off and the + * PWM device. + */ +struct atmel_pwm_bl_platform_data { + unsigned int pwm_channel; + unsigned int pwm_frequency; + unsigned int pwm_compare_max; + unsigned int pwm_duty_max; + unsigned int pwm_duty_min; + unsigned int pwm_active_low; + int gpio_on; + unsigned int on_active_low; +}; + +#endif /* __INCLUDE_ATMEL_PWM_BL_H */ diff --git a/include/linux/audit.h b/include/linux/audit.h index 8b82974bdc1..6272a395d43 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -286,7 +286,6 @@ #define AUDIT_ARCH_SHEL64 (EM_SH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_ARCH_SPARC (EM_SPARC) #define AUDIT_ARCH_SPARC64 (EM_SPARCV9|__AUDIT_ARCH_64BIT) -#define AUDIT_ARCH_V850 (EM_V850|__AUDIT_ARCH_LE) #define AUDIT_ARCH_X86_64 (EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE) #define AUDIT_PERM_EXEC 1 diff --git a/include/linux/auto_fs4.h b/include/linux/auto_fs4.h index 31a29541b50..b785c6f8644 100644 --- a/include/linux/auto_fs4.h +++ b/include/linux/auto_fs4.h @@ -98,8 +98,6 @@ union autofs_v5_packet_union { #define AUTOFS_IOC_EXPIRE_INDIRECT AUTOFS_IOC_EXPIRE_MULTI #define AUTOFS_IOC_EXPIRE_DIRECT AUTOFS_IOC_EXPIRE_MULTI #define AUTOFS_IOC_PROTOSUBVER _IOR(0x93,0x67,int) -#define AUTOFS_IOC_ASKREGHOST _IOR(0x93,0x68,int) -#define AUTOFS_IOC_TOGGLEREGHOST _IOR(0x93,0x69,int) #define AUTOFS_IOC_ASKUMOUNT _IOR(0x93,0x70,int) diff --git a/include/linux/bcd.h b/include/linux/bcd.h index c545308125b..7ac518e3c15 100644 --- a/include/linux/bcd.h +++ b/include/linux/bcd.h @@ -10,8 +10,13 @@ #ifndef _BCD_H #define _BCD_H -#define BCD2BIN(val) (((val) & 0x0f) + ((val)>>4)*10) -#define BIN2BCD(val) ((((val)/10)<<4) + (val)%10) +#include <linux/compiler.h> + +unsigned bcd2bin(unsigned char val) __attribute_const__; +unsigned char bin2bcd(unsigned val) __attribute_const__; + +#define BCD2BIN(val) bcd2bin(val) +#define BIN2BCD(val) bin2bcd(val) /* backwards compat */ #define BCD_TO_BIN(val) ((val)=BCD2BIN(val)) diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index ee0ed48e834..826f6235080 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -38,7 +38,7 @@ struct linux_binprm{ misc_bang:1; struct file * file; int e_uid, e_gid; - kernel_cap_t cap_inheritable, cap_permitted; + kernel_cap_t cap_post_exec_permitted; bool cap_effective; void *security; int argc, envc; diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index a1d9b79078e..4ddf2922fc8 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -28,52 +28,73 @@ extern unsigned long saved_max_pfn; * memory pages (including holes) on the node. */ typedef struct bootmem_data { - unsigned long node_boot_start; + unsigned long node_min_pfn; unsigned long node_low_pfn; void *node_bootmem_map; - unsigned long last_offset; - unsigned long last_pos; - unsigned long last_success; /* Previous allocation point. To speed - * up searching */ + unsigned long last_end_off; + unsigned long hint_idx; struct list_head list; } bootmem_data_t; +extern bootmem_data_t bootmem_node_data[]; + extern unsigned long bootmem_bootmap_pages(unsigned long); + +extern unsigned long init_bootmem_node(pg_data_t *pgdat, + unsigned long freepfn, + unsigned long startpfn, + unsigned long endpfn); extern unsigned long init_bootmem(unsigned long addr, unsigned long memend); + +extern unsigned long free_all_bootmem_node(pg_data_t *pgdat); +extern unsigned long free_all_bootmem(void); + +extern void free_bootmem_node(pg_data_t *pgdat, + unsigned long addr, + unsigned long size); extern void free_bootmem(unsigned long addr, unsigned long size); -extern void *__alloc_bootmem(unsigned long size, + +/* + * Flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE, + * the architecture-specific code should honor this). + * + * If flags is 0, then the return value is always 0 (success). If + * flags contains BOOTMEM_EXCLUSIVE, then -EBUSY is returned if the + * memory already was reserved. + */ +#define BOOTMEM_DEFAULT 0 +#define BOOTMEM_EXCLUSIVE (1<<0) + +extern int reserve_bootmem_node(pg_data_t *pgdat, + unsigned long physaddr, + unsigned long size, + int flags); +#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE +extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags); +#endif + +extern void *__alloc_bootmem_nopanic(unsigned long size, unsigned long align, unsigned long goal); -extern void *__alloc_bootmem_nopanic(unsigned long size, +extern void *__alloc_bootmem(unsigned long size, unsigned long align, unsigned long goal); extern void *__alloc_bootmem_low(unsigned long size, unsigned long align, unsigned long goal); +extern void *__alloc_bootmem_node(pg_data_t *pgdat, + unsigned long size, + unsigned long align, + unsigned long goal); +extern void *__alloc_bootmem_node_nopanic(pg_data_t *pgdat, + unsigned long size, + unsigned long align, + unsigned long goal); extern void *__alloc_bootmem_low_node(pg_data_t *pgdat, unsigned long size, unsigned long align, unsigned long goal); -extern void *__alloc_bootmem_core(struct bootmem_data *bdata, - unsigned long size, - unsigned long align, - unsigned long goal, - unsigned long limit); - -/* - * flags for reserve_bootmem (also if CONFIG_HAVE_ARCH_BOOTMEM_NODE, - * the architecture-specific code should honor this) - */ -#define BOOTMEM_DEFAULT 0 -#define BOOTMEM_EXCLUSIVE (1<<0) - #ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE -/* - * If flags is 0, then the return value is always 0 (success). If - * flags contains BOOTMEM_EXCLUSIVE, then -EBUSY is returned if the - * memory already was reserved. - */ -extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags); #define alloc_bootmem(x) \ __alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low(x) \ @@ -86,34 +107,16 @@ extern int reserve_bootmem(unsigned long addr, unsigned long size, int flags); extern int reserve_bootmem_generic(unsigned long addr, unsigned long size, int flags); -extern unsigned long free_all_bootmem(void); -extern unsigned long free_all_bootmem_node(pg_data_t *pgdat); -extern void *__alloc_bootmem_node(pg_data_t *pgdat, - unsigned long size, - unsigned long align, - unsigned long goal); -extern unsigned long init_bootmem_node(pg_data_t *pgdat, - unsigned long freepfn, - unsigned long startpfn, - unsigned long endpfn); -extern int reserve_bootmem_node(pg_data_t *pgdat, - unsigned long physaddr, - unsigned long size, - int flags); -extern void free_bootmem_node(pg_data_t *pgdat, - unsigned long addr, - unsigned long size); -extern void *alloc_bootmem_section(unsigned long size, - unsigned long section_nr); -#ifndef CONFIG_HAVE_ARCH_BOOTMEM_NODE #define alloc_bootmem_node(pgdat, x) \ __alloc_bootmem_node(pgdat, x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_pages_node(pgdat, x) \ __alloc_bootmem_node(pgdat, x, PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low_pages_node(pgdat, x) \ __alloc_bootmem_low_node(pgdat, x, PAGE_SIZE, 0) -#endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */ + +extern void *alloc_bootmem_section(unsigned long size, + unsigned long section_nr); #ifdef CONFIG_HAVE_ARCH_ALLOC_REMAP extern void *alloc_remap(int nid, unsigned long size); diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index c24875bd9c5..1b5c98e7fef 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -17,6 +17,20 @@ * For details of cpus_onto(), see bitmap_onto in lib/bitmap.c. * For details of cpus_fold(), see bitmap_fold in lib/bitmap.c. * + * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . + * Note: The alternate operations with the suffix "_nr" are used + * to limit the range of the loop to nr_cpu_ids instead of + * NR_CPUS when NR_CPUS > 64 for performance reasons. + * If NR_CPUS is <= 64 then most assembler bitmask + * operators execute faster with a constant range, so + * the operator will continue to use NR_CPUS. + * + * Another consideration is that nr_cpu_ids is initialized + * to NR_CPUS and isn't lowered until the possible cpus are + * discovered (including any disabled cpus). So early uses + * will span the entire range of NR_CPUS. + * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . + * * The available cpumask operations are: * * void cpu_set(cpu, mask) turn on bit 'cpu' in mask @@ -38,18 +52,60 @@ * int cpus_empty(mask) Is mask empty (no bits sets)? * int cpus_full(mask) Is mask full (all bits sets)? * int cpus_weight(mask) Hamming weigh - number of set bits + * int cpus_weight_nr(mask) Same using nr_cpu_ids instead of NR_CPUS * * void cpus_shift_right(dst, src, n) Shift right * void cpus_shift_left(dst, src, n) Shift left * * int first_cpu(mask) Number lowest set bit, or NR_CPUS * int next_cpu(cpu, mask) Next cpu past 'cpu', or NR_CPUS + * int next_cpu_nr(cpu, mask) Next cpu past 'cpu', or nr_cpu_ids * * cpumask_t cpumask_of_cpu(cpu) Return cpumask with bit 'cpu' set + *ifdef CONFIG_HAS_CPUMASK_OF_CPU + * cpumask_of_cpu_ptr_declare(v) Declares cpumask_t *v + * cpumask_of_cpu_ptr_next(v, cpu) Sets v = &cpumask_of_cpu_map[cpu] + * cpumask_of_cpu_ptr(v, cpu) Combines above two operations + *else + * cpumask_of_cpu_ptr_declare(v) Declares cpumask_t _v and *v = &_v + * cpumask_of_cpu_ptr_next(v, cpu) Sets _v = cpumask_of_cpu(cpu) + * cpumask_of_cpu_ptr(v, cpu) Combines above two operations + *endif * CPU_MASK_ALL Initializer - all bits set * CPU_MASK_NONE Initializer - no bits set * unsigned long *cpus_addr(mask) Array of unsigned long's in mask * + * CPUMASK_ALLOC kmalloc's a structure that is a composite of many cpumask_t + * variables, and CPUMASK_PTR provides pointers to each field. + * + * The structure should be defined something like this: + * struct my_cpumasks { + * cpumask_t mask1; + * cpumask_t mask2; + * }; + * + * Usage is then: + * CPUMASK_ALLOC(my_cpumasks); + * CPUMASK_PTR(mask1, my_cpumasks); + * CPUMASK_PTR(mask2, my_cpumasks); + * + * --- DO NOT reference cpumask_t pointers until this check --- + * if (my_cpumasks == NULL) + * "kmalloc failed"... + * + * References are now pointers to the cpumask_t variables (*mask1, ...) + * + *if NR_CPUS > BITS_PER_LONG + * CPUMASK_ALLOC(m) Declares and allocates struct m *m = + * kmalloc(sizeof(*m), GFP_KERNEL) + * CPUMASK_FREE(m) Macro for kfree(m) + *else + * CPUMASK_ALLOC(m) Declares struct m _m, *m = &_m + * CPUMASK_FREE(m) Nop + *endif + * CPUMASK_PTR(v, m) Declares cpumask_t *v = &(m->v) + * ------------------------------------------------------------------------ + * * int cpumask_scnprintf(buf, len, mask) Format cpumask for printing * int cpumask_parse_user(ubuf, ulen, mask) Parse ascii string as cpumask * int cpulist_scnprintf(buf, len, mask) Format cpumask as list for printing @@ -59,7 +115,8 @@ * void cpus_onto(dst, orig, relmap) *dst = orig relative to relmap * void cpus_fold(dst, orig, sz) dst bits = orig bits mod sz * - * for_each_cpu_mask(cpu, mask) for-loop cpu over mask + * for_each_cpu_mask(cpu, mask) for-loop cpu over mask using NR_CPUS + * for_each_cpu_mask_nr(cpu, mask) for-loop cpu over mask using nr_cpu_ids * * int num_online_cpus() Number of online CPUs * int num_possible_cpus() Number of all possible CPUs @@ -216,23 +273,19 @@ static inline void __cpus_shift_left(cpumask_t *dstp, bitmap_shift_left(dstp->bits, srcp->bits, n, nbits); } -#ifdef CONFIG_SMP -int __first_cpu(const cpumask_t *srcp); -#define first_cpu(src) __first_cpu(&(src)) -int __next_cpu(int n, const cpumask_t *srcp); -#define next_cpu(n, src) __next_cpu((n), &(src)) -#else -#define first_cpu(src) ({ (void)(src); 0; }) -#define next_cpu(n, src) ({ (void)(src); 1; }) -#endif #ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP extern cpumask_t *cpumask_of_cpu_map; -#define cpumask_of_cpu(cpu) (cpumask_of_cpu_map[cpu]) - +#define cpumask_of_cpu(cpu) (cpumask_of_cpu_map[cpu]) +#define cpumask_of_cpu_ptr(v, cpu) \ + const cpumask_t *v = &cpumask_of_cpu(cpu) +#define cpumask_of_cpu_ptr_declare(v) \ + const cpumask_t *v +#define cpumask_of_cpu_ptr_next(v, cpu) \ + v = &cpumask_of_cpu(cpu) #else #define cpumask_of_cpu(cpu) \ -(*({ \ +({ \ typeof(_unused_cpumask_arg_) m; \ if (sizeof(m) == sizeof(unsigned long)) { \ m.bits[0] = 1UL<<(cpu); \ @@ -240,8 +293,16 @@ extern cpumask_t *cpumask_of_cpu_map; cpus_clear(m); \ cpu_set((cpu), m); \ } \ - &m; \ -})) + m; \ +}) +#define cpumask_of_cpu_ptr(v, cpu) \ + cpumask_t _##v = cpumask_of_cpu(cpu); \ + const cpumask_t *v = &_##v +#define cpumask_of_cpu_ptr_declare(v) \ + cpumask_t _##v; \ + const cpumask_t *v = &_##v +#define cpumask_of_cpu_ptr_next(v, cpu) \ + _##v = cpumask_of_cpu(cpu) #endif #define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS) @@ -281,6 +342,15 @@ extern cpumask_t cpu_mask_all; #define cpus_addr(src) ((src).bits) +#if NR_CPUS > BITS_PER_LONG +#define CPUMASK_ALLOC(m) struct m *m = kmalloc(sizeof(*m), GFP_KERNEL) +#define CPUMASK_FREE(m) kfree(m) +#else +#define CPUMASK_ALLOC(m) struct m _m, *m = &_m +#define CPUMASK_FREE(m) +#endif +#define CPUMASK_PTR(v, m) cpumask_t *v = &(m->v) + #define cpumask_scnprintf(buf, len, src) \ __cpumask_scnprintf((buf), (len), &(src), NR_CPUS) static inline int __cpumask_scnprintf(char *buf, int len, @@ -343,29 +413,59 @@ static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp, bitmap_fold(dstp->bits, origp->bits, sz, nbits); } -#if NR_CPUS > 1 -#define for_each_cpu_mask(cpu, mask) \ - for ((cpu) = first_cpu(mask); \ - (cpu) < NR_CPUS; \ - (cpu) = next_cpu((cpu), (mask))) -#else /* NR_CPUS == 1 */ -#define for_each_cpu_mask(cpu, mask) \ +#if NR_CPUS == 1 + +#define nr_cpu_ids 1 +#define first_cpu(src) ({ (void)(src); 0; }) +#define next_cpu(n, src) ({ (void)(src); 1; }) +#define any_online_cpu(mask) 0 +#define for_each_cpu_mask(cpu, mask) \ for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask) -#endif /* NR_CPUS */ + +#else /* NR_CPUS > 1 */ + +extern int nr_cpu_ids; +int __first_cpu(const cpumask_t *srcp); +int __next_cpu(int n, const cpumask_t *srcp); +int __any_online_cpu(const cpumask_t *mask); + +#define first_cpu(src) __first_cpu(&(src)) +#define next_cpu(n, src) __next_cpu((n), &(src)) +#define any_online_cpu(mask) __any_online_cpu(&(mask)) +#define for_each_cpu_mask(cpu, mask) \ + for ((cpu) = -1; \ + (cpu) = next_cpu((cpu), (mask)), \ + (cpu) < NR_CPUS; ) +#endif + +#if NR_CPUS <= 64 #define next_cpu_nr(n, src) next_cpu(n, src) #define cpus_weight_nr(cpumask) cpus_weight(cpumask) #define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask) +#else /* NR_CPUS > 64 */ + +int __next_cpu_nr(int n, const cpumask_t *srcp); +#define next_cpu_nr(n, src) __next_cpu_nr((n), &(src)) +#define cpus_weight_nr(cpumask) __cpus_weight(&(cpumask), nr_cpu_ids) +#define for_each_cpu_mask_nr(cpu, mask) \ + for ((cpu) = -1; \ + (cpu) = next_cpu_nr((cpu), (mask)), \ + (cpu) < nr_cpu_ids; ) + +#endif /* NR_CPUS > 64 */ + /* * The following particular system cpumasks and operations manage - * possible, present and online cpus. Each of them is a fixed size + * possible, present, active and online cpus. Each of them is a fixed size * bitmap of size NR_CPUS. * * #ifdef CONFIG_HOTPLUG_CPU * cpu_possible_map - has bit 'cpu' set iff cpu is populatable * cpu_present_map - has bit 'cpu' set iff cpu is populated * cpu_online_map - has bit 'cpu' set iff cpu available to scheduler + * cpu_active_map - has bit 'cpu' set iff cpu available to migration * #else * cpu_possible_map - has bit 'cpu' set iff cpu is populated * cpu_present_map - copy of cpu_possible_map @@ -416,14 +516,16 @@ static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp, extern cpumask_t cpu_possible_map; extern cpumask_t cpu_online_map; extern cpumask_t cpu_present_map; +extern cpumask_t cpu_active_map; #if NR_CPUS > 1 -#define num_online_cpus() cpus_weight(cpu_online_map) -#define num_possible_cpus() cpus_weight(cpu_possible_map) -#define num_present_cpus() cpus_weight(cpu_present_map) +#define num_online_cpus() cpus_weight_nr(cpu_online_map) +#define num_possible_cpus() cpus_weight_nr(cpu_possible_map) +#define num_present_cpus() cpus_weight_nr(cpu_present_map) #define cpu_online(cpu) cpu_isset((cpu), cpu_online_map) #define cpu_possible(cpu) cpu_isset((cpu), cpu_possible_map) #define cpu_present(cpu) cpu_isset((cpu), cpu_present_map) +#define cpu_active(cpu) cpu_isset((cpu), cpu_active_map) #else #define num_online_cpus() 1 #define num_possible_cpus() 1 @@ -431,21 +533,13 @@ extern cpumask_t cpu_present_map; #define cpu_online(cpu) ((cpu) == 0) #define cpu_possible(cpu) ((cpu) == 0) #define cpu_present(cpu) ((cpu) == 0) +#define cpu_active(cpu) ((cpu) == 0) #endif #define cpu_is_offline(cpu) unlikely(!cpu_online(cpu)) -#ifdef CONFIG_SMP -extern int nr_cpu_ids; -#define any_online_cpu(mask) __any_online_cpu(&(mask)) -int __any_online_cpu(const cpumask_t *mask); -#else -#define nr_cpu_ids 1 -#define any_online_cpu(mask) 0 -#endif - -#define for_each_possible_cpu(cpu) for_each_cpu_mask((cpu), cpu_possible_map) -#define for_each_online_cpu(cpu) for_each_cpu_mask((cpu), cpu_online_map) -#define for_each_present_cpu(cpu) for_each_cpu_mask((cpu), cpu_present_map) +#define for_each_possible_cpu(cpu) for_each_cpu_mask_nr((cpu), cpu_possible_map) +#define for_each_online_cpu(cpu) for_each_cpu_mask_nr((cpu), cpu_online_map) +#define for_each_present_cpu(cpu) for_each_cpu_mask_nr((cpu), cpu_present_map) #endif /* __LINUX_CPUMASK_H */ diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 038578362b4..e8f450c499b 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -78,6 +78,8 @@ extern void cpuset_track_online_nodes(void); extern int current_cpuset_is_being_rebound(void); +extern void rebuild_sched_domains(void); + #else /* !CONFIG_CPUSETS */ static inline int cpuset_init_early(void) { return 0; } @@ -156,6 +158,11 @@ static inline int current_cpuset_is_being_rebound(void) return 0; } +static inline void rebuild_sched_domains(void) +{ + partition_sched_domains(0, NULL, NULL); +} + #endif /* !CONFIG_CPUSETS */ #endif /* _LINUX_CPUSET_H */ diff --git a/include/linux/dca.h b/include/linux/dca.h index af61cd1f37e..b00a753eda5 100644 --- a/include/linux/dca.h +++ b/include/linux/dca.h @@ -10,6 +10,7 @@ void dca_unregister_notify(struct notifier_block *nb); #define DCA_PROVIDER_REMOVE 0x0002 struct dca_provider { + struct list_head node; struct dca_ops *ops; struct device *cd; int id; @@ -18,7 +19,9 @@ struct dca_provider { struct dca_ops { int (*add_requester) (struct dca_provider *, struct device *); int (*remove_requester) (struct dca_provider *, struct device *); - u8 (*get_tag) (struct dca_provider *, int cpu); + u8 (*get_tag) (struct dca_provider *, struct device *, + int cpu); + int (*dev_managed) (struct dca_provider *, struct device *); }; struct dca_provider *alloc_dca_provider(struct dca_ops *ops, int priv_size); @@ -32,9 +35,11 @@ static inline void *dca_priv(struct dca_provider *dca) } /* Requester API */ +#define DCA_GET_TAG_TWO_ARGS int dca_add_requester(struct device *dev); int dca_remove_requester(struct device *dev); u8 dca_get_tag(int cpu); +u8 dca3_get_tag(struct device *dev, int cpu); /* internal stuff */ int __init dca_sysfs_init(void); diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index d08a5c5eb92..adb0b084eb5 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -89,10 +89,23 @@ enum dma_transaction_type { DMA_MEMSET, DMA_MEMCPY_CRC32C, DMA_INTERRUPT, + DMA_SLAVE, }; /* last transaction type for creation of the capabilities mask */ -#define DMA_TX_TYPE_END (DMA_INTERRUPT + 1) +#define DMA_TX_TYPE_END (DMA_SLAVE + 1) + +/** + * enum dma_slave_width - DMA slave register access width. + * @DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses + * @DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses + * @DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses + */ +enum dma_slave_width { + DMA_SLAVE_WIDTH_8BIT, + DMA_SLAVE_WIDTH_16BIT, + DMA_SLAVE_WIDTH_32BIT, +}; /** * enum dma_ctrl_flags - DMA flags to augment operation preparation, @@ -102,10 +115,14 @@ enum dma_transaction_type { * @DMA_CTRL_ACK - the descriptor cannot be reused until the client * acknowledges receipt, i.e. has has a chance to establish any * dependency chains + * @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s) + * @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s) */ enum dma_ctrl_flags { DMA_PREP_INTERRUPT = (1 << 0), DMA_CTRL_ACK = (1 << 1), + DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2), + DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3), }; /** @@ -115,6 +132,32 @@ enum dma_ctrl_flags { typedef struct { DECLARE_BITMAP(bits, DMA_TX_TYPE_END); } dma_cap_mask_t; /** + * struct dma_slave - Information about a DMA slave + * @dev: device acting as DMA slave + * @dma_dev: required DMA master device. If non-NULL, the client can not be + * bound to other masters than this. + * @tx_reg: physical address of data register used for + * memory-to-peripheral transfers + * @rx_reg: physical address of data register used for + * peripheral-to-memory transfers + * @reg_width: peripheral register width + * + * If dma_dev is non-NULL, the client can not be bound to other DMA + * masters than the one corresponding to this device. The DMA master + * driver may use this to determine if there is controller-specific + * data wrapped around this struct. Drivers of platform code that sets + * the dma_dev field must therefore make sure to use an appropriate + * controller-specific dma slave structure wrapping this struct. + */ +struct dma_slave { + struct device *dev; + struct device *dma_dev; + dma_addr_t tx_reg; + dma_addr_t rx_reg; + enum dma_slave_width reg_width; +}; + +/** * struct dma_chan_percpu - the per-CPU part of struct dma_chan * @refcount: local_t used for open-coded "bigref" counting * @memcpy_count: transaction counter @@ -139,6 +182,7 @@ struct dma_chan_percpu { * @rcu: the DMA channel's RCU head * @device_node: used to add this to the device chan list * @local: per-cpu pointer to a struct dma_chan_percpu + * @client-count: how many clients are using this channel */ struct dma_chan { struct dma_device *device; @@ -154,6 +198,7 @@ struct dma_chan { struct list_head device_node; struct dma_chan_percpu *local; + int client_count; }; #define to_dma_chan(p) container_of(p, struct dma_chan, dev) @@ -202,11 +247,14 @@ typedef enum dma_state_client (*dma_event_callback) (struct dma_client *client, * @event_callback: func ptr to call when something happens * @cap_mask: only return channels that satisfy the requested capabilities * a value of zero corresponds to any capability + * @slave: data for preparing slave transfer. Must be non-NULL iff the + * DMA_SLAVE capability is requested. * @global_node: list_head for global dma_client_list */ struct dma_client { dma_event_callback event_callback; dma_cap_mask_t cap_mask; + struct dma_slave *slave; struct list_head global_node; }; @@ -263,6 +311,8 @@ struct dma_async_tx_descriptor { * @device_prep_dma_zero_sum: prepares a zero_sum operation * @device_prep_dma_memset: prepares a memset operation * @device_prep_dma_interrupt: prepares an end of chain interrupt operation + * @device_prep_slave_sg: prepares a slave dma operation + * @device_terminate_all: terminate all pending operations * @device_issue_pending: push pending transactions to hardware */ struct dma_device { @@ -279,7 +329,8 @@ struct dma_device { int dev_id; struct device *dev; - int (*device_alloc_chan_resources)(struct dma_chan *chan); + int (*device_alloc_chan_resources)(struct dma_chan *chan, + struct dma_client *client); void (*device_free_chan_resources)(struct dma_chan *chan); struct dma_async_tx_descriptor *(*device_prep_dma_memcpy)( @@ -297,6 +348,12 @@ struct dma_device { struct dma_async_tx_descriptor *(*device_prep_dma_interrupt)( struct dma_chan *chan, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_slave_sg)( + struct dma_chan *chan, struct scatterlist *sgl, + unsigned int sg_len, enum dma_data_direction direction, + unsigned long flags); + void (*device_terminate_all)(struct dma_chan *chan); + enum dma_status (*device_is_tx_complete)(struct dma_chan *chan, dma_cookie_t cookie, dma_cookie_t *last, dma_cookie_t *used); @@ -318,16 +375,14 @@ dma_cookie_t dma_async_memcpy_pg_to_pg(struct dma_chan *chan, void dma_async_tx_descriptor_init(struct dma_async_tx_descriptor *tx, struct dma_chan *chan); -static inline void -async_tx_ack(struct dma_async_tx_descriptor *tx) +static inline void async_tx_ack(struct dma_async_tx_descriptor *tx) { tx->flags |= DMA_CTRL_ACK; } -static inline int -async_tx_test_ack(struct dma_async_tx_descriptor *tx) +static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx) { - return tx->flags & DMA_CTRL_ACK; + return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK; } #define first_dma_cap(mask) __first_dma_cap(&(mask)) diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h new file mode 100644 index 00000000000..04d217b442b --- /dev/null +++ b/include/linux/dw_dmac.h @@ -0,0 +1,62 @@ +/* + * Driver for the Synopsys DesignWare DMA Controller (aka DMACA on + * AVR32 systems.) + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef DW_DMAC_H +#define DW_DMAC_H + +#include <linux/dmaengine.h> + +/** + * struct dw_dma_platform_data - Controller configuration parameters + * @nr_channels: Number of channels supported by hardware (max 8) + */ +struct dw_dma_platform_data { + unsigned int nr_channels; +}; + +/** + * struct dw_dma_slave - Controller-specific information about a slave + * @slave: Generic information about the slave + * @ctl_lo: Platform-specific initializer for the CTL_LO register + * @cfg_hi: Platform-specific initializer for the CFG_HI register + * @cfg_lo: Platform-specific initializer for the CFG_LO register + */ +struct dw_dma_slave { + struct dma_slave slave; + u32 cfg_hi; + u32 cfg_lo; +}; + +/* Platform-configurable bits in CFG_HI */ +#define DWC_CFGH_FCMODE (1 << 0) +#define DWC_CFGH_FIFO_MODE (1 << 1) +#define DWC_CFGH_PROTCTL(x) ((x) << 2) +#define DWC_CFGH_SRC_PER(x) ((x) << 7) +#define DWC_CFGH_DST_PER(x) ((x) << 11) + +/* Platform-configurable bits in CFG_LO */ +#define DWC_CFGL_PRIO(x) ((x) << 5) /* priority */ +#define DWC_CFGL_LOCK_CH_XFER (0 << 12) /* scope of LOCK_CH */ +#define DWC_CFGL_LOCK_CH_BLOCK (1 << 12) +#define DWC_CFGL_LOCK_CH_XACT (2 << 12) +#define DWC_CFGL_LOCK_BUS_XFER (0 << 14) /* scope of LOCK_BUS */ +#define DWC_CFGL_LOCK_BUS_BLOCK (1 << 14) +#define DWC_CFGL_LOCK_BUS_XACT (2 << 14) +#define DWC_CFGL_LOCK_CH (1 << 15) /* channel lockout */ +#define DWC_CFGL_LOCK_BUS (1 << 16) /* busmaster lockout */ +#define DWC_CFGL_HS_DST_POL (1 << 18) /* dst handshake active low */ +#define DWC_CFGL_HS_SRC_POL (1 << 19) /* src handshake active low */ + +static inline struct dw_dma_slave *to_dw_dma_slave(struct dma_slave *slave) +{ + return container_of(slave, struct dw_dma_slave, slave); +} + +#endif /* DW_DMAC_H */ diff --git a/include/linux/eventfd.h b/include/linux/eventfd.h index a701399b7fe..a667637b54e 100644 --- a/include/linux/eventfd.h +++ b/include/linux/eventfd.h @@ -10,6 +10,13 @@ #ifdef CONFIG_EVENTFD +/* For O_CLOEXEC and O_NONBLOCK */ +#include <linux/fcntl.h> + +/* Flags for eventfd2. */ +#define EFD_CLOEXEC O_CLOEXEC +#define EFD_NONBLOCK O_NONBLOCK + struct file *eventfd_fget(int fd); int eventfd_signal(struct file *file, int n); diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h index cf79853967f..f1e1d3c4712 100644 --- a/include/linux/eventpoll.h +++ b/include/linux/eventpoll.h @@ -14,8 +14,12 @@ #ifndef _LINUX_EVENTPOLL_H #define _LINUX_EVENTPOLL_H +/* For O_CLOEXEC */ +#include <linux/fcntl.h> #include <linux/types.h> +/* Flags for epoll_create1. */ +#define EPOLL_CLOEXEC O_CLOEXEC /* Valid opcodes to issue to sys_epoll_ctl() */ #define EPOLL_CTL_ADD 1 diff --git a/include/linux/fb.h b/include/linux/fb.h index 72295b09922..3b8870e32af 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -8,7 +8,6 @@ struct dentry; /* Definitions of frame buffers */ -#define FB_MAJOR 29 #define FB_MAX 32 /* sufficient for now */ /* ioctls @@ -120,6 +119,10 @@ struct dentry; #define FB_ACCEL_XGI_VOLARI_V 47 /* XGI Volari V3XT, V5, V8 */ #define FB_ACCEL_XGI_VOLARI_Z 48 /* XGI Volari Z7 */ #define FB_ACCEL_OMAP1610 49 /* TI OMAP16xx */ +#define FB_ACCEL_TRIDENT_TGUI 50 /* Trident TGUI */ +#define FB_ACCEL_TRIDENT_3DIMAGE 51 /* Trident 3DImage */ +#define FB_ACCEL_TRIDENT_BLADE3D 52 /* Trident Blade3D */ +#define FB_ACCEL_TRIDENT_BLADEXP 53 /* Trident BladeXP */ #define FB_ACCEL_NEOMAGIC_NM2070 90 /* NeoMagic NM2070 */ #define FB_ACCEL_NEOMAGIC_NM2090 91 /* NeoMagic NM2090 */ #define FB_ACCEL_NEOMAGIC_NM2093 92 /* NeoMagic NM2093 */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 9c2ac5c0ef5..4b86f806014 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1025,6 +1025,7 @@ extern int send_sigurg(struct fown_struct *fown); extern struct list_head super_blocks; extern spinlock_t sb_lock; +#define sb_entry(list) list_entry((list), struct super_block, s_list) #define S_BIAS (1<<30) struct super_block { struct list_head s_list; /* Keep this first */ @@ -1058,6 +1059,9 @@ struct super_block { struct list_head s_more_io; /* parked for more writeback */ struct hlist_head s_anon; /* anonymous dentries for (nfs) exporting */ struct list_head s_files; + /* s_dentry_lru and s_nr_dentry_unused are protected by dcache_lock */ + struct list_head s_dentry_lru; /* unused dentry lru */ + int s_nr_dentry_unused; /* # of dentry on lru */ struct block_device *s_bdev; struct mtd_info *s_mtd; @@ -1773,8 +1777,9 @@ static inline void allow_write_access(struct file *file) atomic_inc(&file->f_path.dentry->d_inode->i_writecount); } extern int do_pipe(int *); -extern struct file *create_read_pipe(struct file *f); -extern struct file *create_write_pipe(void); +extern int do_pipe_flags(int *, int); +extern struct file *create_read_pipe(struct file *f, int flags); +extern struct file *create_write_pipe(int flags); extern void free_write_pipe(struct file *); extern struct file *do_filp_open(int dfd, const char *pathname, @@ -2006,8 +2011,6 @@ extern void simple_release_fs(struct vfsmount **mount, int *count); extern ssize_t simple_read_from_buffer(void __user *to, size_t count, loff_t *ppos, const void *from, size_t available); -extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos, - const void *from, size_t available); #ifdef CONFIG_MIGRATION extern int buffer_migrate_page(struct address_space *, diff --git a/include/linux/gfp.h b/include/linux/gfp.h index b414be38718..e8003afeffb 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -173,11 +173,24 @@ static inline void arch_free_page(struct page *page, int order) { } static inline void arch_alloc_page(struct page *page, int order) { } #endif -extern struct page *__alloc_pages(gfp_t, unsigned int, struct zonelist *); +struct page * +__alloc_pages_internal(gfp_t gfp_mask, unsigned int order, + struct zonelist *zonelist, nodemask_t *nodemask); + +static inline struct page * +__alloc_pages(gfp_t gfp_mask, unsigned int order, + struct zonelist *zonelist) +{ + return __alloc_pages_internal(gfp_mask, order, zonelist, NULL); +} + +static inline struct page * +__alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order, + struct zonelist *zonelist, nodemask_t *nodemask) +{ + return __alloc_pages_internal(gfp_mask, order, zonelist, nodemask); +} -extern struct page * -__alloc_pages_nodemask(gfp_t, unsigned int, - struct zonelist *, nodemask_t *nodemask); static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask, unsigned int order) @@ -215,6 +228,9 @@ extern struct page *alloc_page_vma(gfp_t gfp_mask, extern unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order); extern unsigned long get_zeroed_page(gfp_t gfp_mask); +void *alloc_pages_exact(size_t size, gfp_t gfp_mask); +void free_pages_exact(void *virt, size_t size); + #define __get_free_page(gfp_mask) \ __get_free_pages((gfp_mask),0) diff --git a/include/linux/hid.h b/include/linux/hid.h index fe56b86f2c6..ac4e678a04e 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -512,7 +512,7 @@ struct hid_descriptor { /* Applications from HID Usage Tables 4/8/99 Version 1.1 */ /* We ignore a few input applications that are not widely used */ -#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001)) +#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001) || (a == 0x000d0002)) /* HID core API */ diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h index a79e80b689d..9a71d4cc88c 100644 --- a/include/linux/hugetlb.h +++ b/include/linux/hugetlb.h @@ -8,7 +8,6 @@ #include <linux/mempolicy.h> #include <linux/shm.h> #include <asm/tlbflush.h> -#include <asm/hugetlb.h> struct ctl_table; @@ -17,38 +16,45 @@ static inline int is_vm_hugetlb_page(struct vm_area_struct *vma) return vma->vm_flags & VM_HUGETLB; } +void reset_vma_resv_huge_pages(struct vm_area_struct *vma); int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *); int hugetlb_overcommit_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *); int hugetlb_treat_movable_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *); int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *); int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *, struct page **, struct vm_area_struct **, unsigned long *, int *, int, int); -void unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long); -void __unmap_hugepage_range(struct vm_area_struct *, unsigned long, unsigned long); +void unmap_hugepage_range(struct vm_area_struct *, + unsigned long, unsigned long, struct page *); +void __unmap_hugepage_range(struct vm_area_struct *, + unsigned long, unsigned long, struct page *); int hugetlb_prefault(struct address_space *, struct vm_area_struct *); int hugetlb_report_meminfo(char *); int hugetlb_report_node_meminfo(int, char *); unsigned long hugetlb_total_pages(void); int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, int write_access); -int hugetlb_reserve_pages(struct inode *inode, long from, long to); +int hugetlb_reserve_pages(struct inode *inode, long from, long to, + struct vm_area_struct *vma); void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed); -extern unsigned long max_huge_pages; -extern unsigned long sysctl_overcommit_huge_pages; extern unsigned long hugepages_treat_as_movable; extern const unsigned long hugetlb_zero, hugetlb_infinity; extern int sysctl_hugetlb_shm_group; +extern struct list_head huge_boot_pages; /* arch callbacks */ -pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr); +pte_t *huge_pte_alloc(struct mm_struct *mm, + unsigned long addr, unsigned long sz); pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr); int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep); struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address, int write); struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write); +struct page *follow_huge_pud(struct mm_struct *mm, unsigned long address, + pud_t *pud, int write); int pmd_huge(pmd_t pmd); +int pud_huge(pud_t pmd); void hugetlb_change_protection(struct vm_area_struct *vma, unsigned long address, unsigned long end, pgprot_t newprot); @@ -58,6 +64,11 @@ static inline int is_vm_hugetlb_page(struct vm_area_struct *vma) { return 0; } + +static inline void reset_vma_resv_huge_pages(struct vm_area_struct *vma) +{ +} + static inline unsigned long hugetlb_total_pages(void) { return 0; @@ -67,12 +78,14 @@ static inline unsigned long hugetlb_total_pages(void) #define follow_huge_addr(mm, addr, write) ERR_PTR(-EINVAL) #define copy_hugetlb_page_range(src, dst, vma) ({ BUG(); 0; }) #define hugetlb_prefault(mapping, vma) ({ BUG(); 0; }) -#define unmap_hugepage_range(vma, start, end) BUG() +#define unmap_hugepage_range(vma, start, end, page) BUG() #define hugetlb_report_meminfo(buf) 0 #define hugetlb_report_node_meminfo(n, buf) 0 #define follow_huge_pmd(mm, addr, pmd, write) NULL -#define prepare_hugepage_range(addr,len) (-EINVAL) +#define follow_huge_pud(mm, addr, pud, write) NULL +#define prepare_hugepage_range(file, addr, len) (-EINVAL) #define pmd_huge(x) 0 +#define pud_huge(x) 0 #define is_hugepage_only_range(mm, addr, len) 0 #define hugetlb_free_pgd_range(tlb, addr, end, floor, ceiling) ({BUG(); 0; }) #define hugetlb_fault(mm, vma, addr, write) ({ BUG(); 0; }) @@ -93,6 +106,7 @@ struct hugetlbfs_config { umode_t mode; long nr_blocks; long nr_inodes; + struct hstate *hstate; }; struct hugetlbfs_sb_info { @@ -101,6 +115,7 @@ struct hugetlbfs_sb_info { long max_inodes; /* inodes allowed */ long free_inodes; /* inodes free */ spinlock_t stat_lock; + struct hstate *hstate; }; @@ -125,8 +140,6 @@ struct file *hugetlb_file_setup(const char *name, size_t); int hugetlb_get_quota(struct address_space *mapping, long delta); void hugetlb_put_quota(struct address_space *mapping, long delta); -#define BLOCKS_PER_HUGEPAGE (HPAGE_SIZE / 512) - static inline int is_file_hugepages(struct file *file) { if (file->f_op == &hugetlbfs_file_operations) @@ -155,4 +168,112 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, unsigned long flags); #endif /* HAVE_ARCH_HUGETLB_UNMAPPED_AREA */ +#ifdef CONFIG_HUGETLB_PAGE + +#define HSTATE_NAME_LEN 32 +/* Defines one hugetlb page size */ +struct hstate { + int hugetlb_next_nid; + unsigned int order; + unsigned long mask; + unsigned long max_huge_pages; + unsigned long nr_huge_pages; + unsigned long free_huge_pages; + unsigned long resv_huge_pages; + unsigned long surplus_huge_pages; + unsigned long nr_overcommit_huge_pages; + struct list_head hugepage_freelists[MAX_NUMNODES]; + unsigned int nr_huge_pages_node[MAX_NUMNODES]; + unsigned int free_huge_pages_node[MAX_NUMNODES]; + unsigned int surplus_huge_pages_node[MAX_NUMNODES]; + char name[HSTATE_NAME_LEN]; +}; + +struct huge_bootmem_page { + struct list_head list; + struct hstate *hstate; +}; + +/* arch callback */ +int __init alloc_bootmem_huge_page(struct hstate *h); + +void __init hugetlb_add_hstate(unsigned order); +struct hstate *size_to_hstate(unsigned long size); + +#ifndef HUGE_MAX_HSTATE +#define HUGE_MAX_HSTATE 1 +#endif + +extern struct hstate hstates[HUGE_MAX_HSTATE]; +extern unsigned int default_hstate_idx; + +#define default_hstate (hstates[default_hstate_idx]) + +static inline struct hstate *hstate_inode(struct inode *i) +{ + struct hugetlbfs_sb_info *hsb; + hsb = HUGETLBFS_SB(i->i_sb); + return hsb->hstate; +} + +static inline struct hstate *hstate_file(struct file *f) +{ + return hstate_inode(f->f_dentry->d_inode); +} + +static inline struct hstate *hstate_vma(struct vm_area_struct *vma) +{ + return hstate_file(vma->vm_file); +} + +static inline unsigned long huge_page_size(struct hstate *h) +{ + return (unsigned long)PAGE_SIZE << h->order; +} + +static inline unsigned long huge_page_mask(struct hstate *h) +{ + return h->mask; +} + +static inline unsigned int huge_page_order(struct hstate *h) +{ + return h->order; +} + +static inline unsigned huge_page_shift(struct hstate *h) +{ + return h->order + PAGE_SHIFT; +} + +static inline unsigned int pages_per_huge_page(struct hstate *h) +{ + return 1 << h->order; +} + +static inline unsigned int blocks_per_huge_page(struct hstate *h) +{ + return huge_page_size(h) / 512; +} + +#include <asm/hugetlb.h> + +static inline struct hstate *page_hstate(struct page *page) +{ + return size_to_hstate(PAGE_SIZE << compound_order(page)); +} + +#else +struct hstate {}; +#define alloc_bootmem_huge_page(h) NULL +#define hstate_file(f) NULL +#define hstate_vma(v) NULL +#define hstate_inode(i) NULL +#define huge_page_size(h) PAGE_SIZE +#define huge_page_mask(h) PAGE_MASK +#define huge_page_order(h) 0 +#define huge_page_shift(h) PAGE_SHIFT +#define pages_per_huge_page(h) 1 +#endif + #endif /* _LINUX_HUGETLB_H */ diff --git a/include/linux/ide.h b/include/linux/ide.h index 4726126f5a5..d67ccca2b96 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -178,6 +178,7 @@ typedef struct hw_regs_s { ide_ack_intr_t *ack_intr; /* acknowledge interrupt */ hwif_chipset_t chipset; struct device *dev, *parent; + unsigned long config; } hw_regs_t; void ide_init_port_data(struct hwif_s *, unsigned int); @@ -307,7 +308,65 @@ struct ide_acpi_drive_link; struct ide_acpi_hwif_link; #endif -typedef struct ide_drive_s { +/* ATAPI device flags */ +enum { + IDE_AFLAG_DRQ_INTERRUPT = (1 << 0), + IDE_AFLAG_MEDIA_CHANGED = (1 << 1), + + /* ide-cd */ + /* Drive cannot lock the door. */ + IDE_AFLAG_NO_DOORLOCK = (1 << 2), + /* Drive cannot eject the disc. */ + IDE_AFLAG_NO_EJECT = (1 << 3), + /* Drive is a pre ATAPI 1.2 drive. */ + IDE_AFLAG_PRE_ATAPI12 = (1 << 4), + /* TOC addresses are in BCD. */ + IDE_AFLAG_TOCADDR_AS_BCD = (1 << 5), + /* TOC track numbers are in BCD. */ + IDE_AFLAG_TOCTRACKS_AS_BCD = (1 << 6), + /* + * Drive does not provide data in multiples of SECTOR_SIZE + * when more than one interrupt is needed. + */ + IDE_AFLAG_LIMIT_NFRAMES = (1 << 7), + /* Seeking in progress. */ + IDE_AFLAG_SEEKING = (1 << 8), + /* Saved TOC information is current. */ + IDE_AFLAG_TOC_VALID = (1 << 9), + /* We think that the drive door is locked. */ + IDE_AFLAG_DOOR_LOCKED = (1 << 10), + /* SET_CD_SPEED command is unsupported. */ + IDE_AFLAG_NO_SPEED_SELECT = (1 << 11), + IDE_AFLAG_VERTOS_300_SSD = (1 << 12), + IDE_AFLAG_VERTOS_600_ESD = (1 << 13), + IDE_AFLAG_SANYO_3CD = (1 << 14), + IDE_AFLAG_FULL_CAPS_PAGE = (1 << 15), + IDE_AFLAG_PLAY_AUDIO_OK = (1 << 16), + IDE_AFLAG_LE_SPEED_FIELDS = (1 << 17), + + /* ide-floppy */ + /* Format in progress */ + IDE_AFLAG_FORMAT_IN_PROGRESS = (1 << 18), + /* Avoid commands not supported in Clik drive */ + IDE_AFLAG_CLIK_DRIVE = (1 << 19), + /* Requires BH algorithm for packets */ + IDE_AFLAG_ZIP_DRIVE = (1 << 20), + + /* ide-tape */ + IDE_AFLAG_IGNORE_DSC = (1 << 21), + /* 0 When the tape position is unknown */ + IDE_AFLAG_ADDRESS_VALID = (1 << 22), + /* Device already opened */ + IDE_AFLAG_BUSY = (1 << 23), + /* Attempt to auto-detect the current user block size */ + IDE_AFLAG_DETECT_BS = (1 << 24), + /* Currently on a filemark */ + IDE_AFLAG_FILEMARK = (1 << 25), + /* 0 = no tape is loaded, so we don't rewind after ejecting */ + IDE_AFLAG_MEDIUM_PRESENT = (1 << 26) +}; + +struct ide_drive_s { char name[4]; /* drive name, such as "hda" */ char driver_req[10]; /* requests specific driver */ @@ -355,7 +414,6 @@ typedef struct ide_drive_s { unsigned nodma : 1; /* disallow DMA */ unsigned remap_0_to_1 : 1; /* 0=noremap, 1=remap 0->1 (for EZDrive) */ unsigned blocked : 1; /* 1=powermanagment told us not to do anything, so sleep nicely */ - unsigned vdma : 1; /* 1=doing PIO over DMA 0=doing normal DMA */ unsigned scsi : 1; /* 0=default, 1=ide-scsi emulation */ unsigned sleeping : 1; /* 1=sleeping & sleep field valid */ unsigned post_reset : 1; @@ -400,7 +458,14 @@ typedef struct ide_drive_s { struct list_head list; struct device gendev; struct completion gendev_rel_comp; /* to deal with device release() */ -} ide_drive_t; + + /* callback for packet commands */ + void (*pc_callback)(struct ide_drive_s *); + + unsigned long atapi_flags; +}; + +typedef struct ide_drive_s ide_drive_t; #define to_ide_device(dev)container_of(dev, ide_drive_t, gendev) @@ -408,8 +473,28 @@ typedef struct ide_drive_s { ((1<<ide_pci)|(1<<ide_cmd646)|(1<<ide_ali14xx)) #define IDE_CHIPSET_IS_PCI(c) ((IDE_CHIPSET_PCI_MASK >> (c)) & 1) +struct ide_task_s; struct ide_port_info; +struct ide_tp_ops { + void (*exec_command)(struct hwif_s *, u8); + u8 (*read_status)(struct hwif_s *); + u8 (*read_altstatus)(struct hwif_s *); + u8 (*read_sff_dma_status)(struct hwif_s *); + + void (*set_irq)(struct hwif_s *, int); + + void (*tf_load)(ide_drive_t *, struct ide_task_s *); + void (*tf_read)(ide_drive_t *, struct ide_task_s *); + + void (*input_data)(ide_drive_t *, struct request *, void *, + unsigned int); + void (*output_data)(ide_drive_t *, struct request *, void *, + unsigned int); +}; + +extern const struct ide_tp_ops default_tp_ops; + struct ide_port_ops { /* host specific initialization of a device */ void (*init_dev)(ide_drive_t *); @@ -447,8 +532,6 @@ struct ide_dma_ops { void (*dma_timeout)(struct ide_drive_s *); }; -struct ide_task_s; - typedef struct hwif_s { struct hwif_s *next; /* for linked-list in ide_hwgroup_t */ struct hwif_s *mate; /* other hwif from same PCI chip */ @@ -486,22 +569,12 @@ typedef struct hwif_s { void (*rw_disk)(ide_drive_t *, struct request *); + const struct ide_tp_ops *tp_ops; const struct ide_port_ops *port_ops; const struct ide_dma_ops *dma_ops; - void (*tf_load)(ide_drive_t *, struct ide_task_s *); - void (*tf_read)(ide_drive_t *, struct ide_task_s *); - - void (*input_data)(ide_drive_t *, struct request *, void *, unsigned); - void (*output_data)(ide_drive_t *, struct request *, void *, unsigned); - void (*ide_dma_clear_irq)(ide_drive_t *drive); - void (*OUTB)(u8 addr, unsigned long port); - void (*OUTBSYNC)(struct hwif_s *hwif, u8 addr, unsigned long port); - - u8 (*INB)(unsigned long port); - /* dma physical region descriptor table (cpu view) */ unsigned int *dmatable_cpu; /* dma physical region descriptor table (dma view) */ @@ -524,8 +597,6 @@ typedef struct hwif_s { int irq; /* our irq number */ unsigned long dma_base; /* base addr for dma ports */ - unsigned long dma_command; /* dma command register */ - unsigned long dma_status; /* dma status register */ unsigned long config_data; /* for use by chipset-specific code */ unsigned long select_data; /* for use by chipset-specific code */ @@ -552,6 +623,11 @@ typedef struct hwif_s { #endif } ____cacheline_internodealigned_in_smp ide_hwif_t; +struct ide_host { + ide_hwif_t *ports[MAX_HWIFS]; + unsigned int n_ports; +}; + /* * internal ide interrupt handler type */ @@ -611,8 +687,6 @@ enum { PC_FLAG_WRITING = (1 << 6), /* command timed out */ PC_FLAG_TIMEDOUT = (1 << 7), - PC_FLAG_ZIP_DRIVE = (1 << 8), - PC_FLAG_DRQ_INTERRUPT = (1 << 9), }; struct ide_atapi_pc { @@ -646,8 +720,6 @@ struct ide_atapi_pc { */ u8 pc_buf[256]; - void (*callback)(ide_drive_t *); - /* idetape only */ struct idetape_bh *bh; char *b_data; @@ -807,13 +879,6 @@ int generic_ide_ioctl(ide_drive_t *, struct file *, struct block_device *, unsig extern int ide_vlb_clk; extern int ide_pci_clk; -ide_hwif_t *ide_find_port_slot(const struct ide_port_info *); - -static inline ide_hwif_t *ide_find_port(void) -{ - return ide_find_port_slot(NULL); -} - extern int ide_end_request (ide_drive_t *drive, int uptodate, int nrsecs); int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq, int uptodate, int nr_sectors); @@ -884,6 +949,7 @@ enum { IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_FEATURE | IDE_TFLAG_IN_HOB_NSECT | IDE_TFLAG_IN_HOB_LBA, + IDE_TFLAG_IN_FEATURE = (1 << 1), IDE_TFLAG_IN_NSECT = (1 << 25), IDE_TFLAG_IN_LBAL = (1 << 26), IDE_TFLAG_IN_LBAM = (1 << 27), @@ -948,9 +1014,25 @@ typedef struct ide_task_s { void ide_tf_dump(const char *, struct ide_taskfile *); +void ide_exec_command(ide_hwif_t *, u8); +u8 ide_read_status(ide_hwif_t *); +u8 ide_read_altstatus(ide_hwif_t *); +u8 ide_read_sff_dma_status(ide_hwif_t *); + +void ide_set_irq(ide_hwif_t *, int); + +void ide_tf_load(ide_drive_t *, ide_task_t *); +void ide_tf_read(ide_drive_t *, ide_task_t *); + +void ide_input_data(ide_drive_t *, struct request *, void *, unsigned int); +void ide_output_data(ide_drive_t *, struct request *, void *, unsigned int); + extern void SELECT_DRIVE(ide_drive_t *); void SELECT_MASK(ide_drive_t *, int); +u8 ide_read_error(ide_drive_t *); +void ide_read_bcount_and_ireason(ide_drive_t *, u16 *, u8 *); + extern int drive_is_ready(ide_drive_t *); void ide_pktcmd_tf_load(ide_drive_t *, u32, u16, u8); @@ -1000,12 +1082,15 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o #define ide_pci_register_driver(d) pci_register_driver(d) #endif -void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *); +void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, + hw_regs_t *, hw_regs_t **); void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); #ifdef CONFIG_BLK_DEV_IDEDMA_PCI int ide_pci_set_master(struct pci_dev *, const char *); unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *); +extern const struct ide_dma_ops sff_dma_ops; +int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *); int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); #else static inline int ide_hwif_setup_dma(ide_hwif_t *hwif, @@ -1015,10 +1100,6 @@ static inline int ide_hwif_setup_dma(ide_hwif_t *hwif, } #endif -extern void default_hwif_iops(ide_hwif_t *); -extern void default_hwif_mmiops(ide_hwif_t *); -extern void default_hwif_transport(ide_hwif_t *); - typedef struct ide_pci_enablebit_s { u8 reg; /* byte pci reg holding the enable-bit */ u8 mask; /* mask to isolate the enable-bit */ @@ -1081,7 +1162,6 @@ enum { IDE_HFLAG_IO_32BIT = (1 << 24), /* unmask IRQs */ IDE_HFLAG_UNMASK_IRQS = (1 << 25), - IDE_HFLAG_ABUSE_SET_DMA_MODE = (1 << 26), /* serialize ports if DMA is possible (for sl82c105) */ IDE_HFLAG_SERIALIZE_DMA = (1 << 27), /* force host out of "simplex" mode */ @@ -1092,8 +1172,6 @@ enum { IDE_HFLAG_NO_IO_32BIT = (1 << 30), /* never unmask IRQs */ IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31), - /* host uses VDMA (disabled for now) */ - IDE_HFLAG_VDMA = 0, }; #ifdef CONFIG_BLK_DEV_OFFBOARD @@ -1110,6 +1188,7 @@ struct ide_port_info { int (*init_dma)(ide_hwif_t *, const struct ide_port_info *); + const struct ide_tp_ops *tp_ops; const struct ide_port_ops *port_ops; const struct ide_dma_ops *dma_ops; @@ -1163,7 +1242,6 @@ void ide_destroy_dmatable(ide_drive_t *); extern int ide_build_dmatable(ide_drive_t *, struct request *); int ide_allocate_dma_engine(ide_hwif_t *); void ide_release_dma_engine(ide_hwif_t *); -void ide_setup_dma(ide_hwif_t *, unsigned long); void ide_dma_host_set(ide_drive_t *, int); extern int ide_dma_setup(ide_drive_t *); @@ -1217,8 +1295,14 @@ void ide_undecoded_slave(ide_drive_t *); void ide_port_apply_params(ide_hwif_t *); -int ide_device_add_all(u8 *idx, const struct ide_port_info *); -int ide_device_add(u8 idx[4], const struct ide_port_info *); +struct ide_host *ide_host_alloc_all(const struct ide_port_info *, hw_regs_t **); +struct ide_host *ide_host_alloc(const struct ide_port_info *, hw_regs_t **); +void ide_host_free(struct ide_host *); +int ide_host_register(struct ide_host *, const struct ide_port_info *, + hw_regs_t **); +int ide_host_add(const struct ide_port_info *, hw_regs_t **, + struct ide_host **); +void ide_host_remove(struct ide_host *); int ide_legacy_device_add(const struct ide_port_info *, unsigned long); void ide_port_unregister_devices(ide_hwif_t *); void ide_port_scan(ide_hwif_t *); @@ -1350,33 +1434,4 @@ static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive) return &hwif->drives[(drive->dn ^ 1) & 1]; } - -static inline void ide_set_irq(ide_drive_t *drive, int on) -{ - ide_hwif_t *hwif = drive->hwif; - - hwif->OUTBSYNC(hwif, ATA_DEVCTL_OBS | (on ? 0 : 2), - hwif->io_ports.ctl_addr); -} - -static inline u8 ide_read_status(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - - return hwif->INB(hwif->io_ports.status_addr); -} - -static inline u8 ide_read_altstatus(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - - return hwif->INB(hwif->io_ports.ctl_addr); -} - -static inline u8 ide_read_error(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - - return hwif->INB(hwif->io_ports.error_addr); -} #endif /* _IDE_H */ diff --git a/include/linux/inotify.h b/include/linux/inotify.h index 742b917e7d1..bd578578a8b 100644 --- a/include/linux/inotify.h +++ b/include/linux/inotify.h @@ -7,6 +7,8 @@ #ifndef _LINUX_INOTIFY_H #define _LINUX_INOTIFY_H +/* For O_CLOEXEC and O_NONBLOCK */ +#include <linux/fcntl.h> #include <linux/types.h> /* @@ -63,6 +65,10 @@ struct inotify_event { IN_MOVED_TO | IN_DELETE | IN_CREATE | IN_DELETE_SELF | \ IN_MOVE_SELF) +/* Flags for sys_inotify_init1. */ +#define IN_CLOEXEC O_CLOEXEC +#define IN_NONBLOCK O_NONBLOCK + #ifdef __KERNEL__ #include <linux/dcache.h> diff --git a/include/linux/kobject.h b/include/linux/kobject.h index 60f0d418ae3..5437ac0276e 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -186,6 +186,8 @@ extern struct kobject *kset_find_obj(struct kset *, const char *); /* The global /sys/kernel/ kobject for people to chain off of */ extern struct kobject *kernel_kobj; +/* The global /sys/kernel/mm/ kobject for people to chain off of */ +extern struct kobject *mm_kobj; /* The global /sys/hypervisor/ kobject for people to chain off of */ extern struct kobject *hypervisor_kobj; /* The global /sys/power/ kobject for people to chain off of */ diff --git a/include/linux/lcd.h b/include/linux/lcd.h index 1d379787f2e..173febac665 100644 --- a/include/linux/lcd.h +++ b/include/linux/lcd.h @@ -47,7 +47,7 @@ struct lcd_ops { int (*set_contrast)(struct lcd_device *, int contrast); /* Check if given framebuffer device is the one LCD is bound to; return 0 if not, !=0 if it is. If NULL, lcd always matches the fb. */ - int (*check_fb)(struct fb_info *); + int (*check_fb)(struct lcd_device *, struct fb_info *); }; struct lcd_device { diff --git a/include/linux/leds-pca9532.h b/include/linux/leds-pca9532.h new file mode 100644 index 00000000000..81b4207deb9 --- /dev/null +++ b/include/linux/leds-pca9532.h @@ -0,0 +1,45 @@ +/* + * pca9532.h - platform data structure for pca9532 led controller + * + * Copyright (C) 2008 Riku Voipio <riku.voipio@movial.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * Datasheet: http://www.nxp.com/acrobat/datasheets/PCA9532_3.pdf + * + */ + +#ifndef __LINUX_PCA9532_H +#define __LINUX_PCA9532_H + +#include <linux/leds.h> + +enum pca9532_state { + PCA9532_OFF = 0x0, + PCA9532_ON = 0x1, + PCA9532_PWM0 = 0x2, + PCA9532_PWM1 = 0x3 +}; + +enum pca9532_type { PCA9532_TYPE_NONE, PCA9532_TYPE_LED, + PCA9532_TYPE_N2100_BEEP }; + +struct pca9532_led { + u8 id; + struct i2c_client *client; + char *name; + struct led_classdev ldev; + enum pca9532_type type; + enum pca9532_state state; +}; + +struct pca9532_platform_data { + struct pca9532_led leds[16]; + u8 pwm[2]; + u8 psc[2]; +}; + +#endif /* __LINUX_PCA9532_H */ + diff --git a/include/linux/leds.h b/include/linux/leds.h index 519df72e939..d41ccb56146 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -48,7 +48,7 @@ struct led_classdev { struct device *dev; struct list_head node; /* LED Device list */ - char *default_trigger; /* Trigger to use */ + const char *default_trigger; /* Trigger to use */ #ifdef CONFIG_LEDS_TRIGGERS /* Protects the trigger data below */ @@ -118,6 +118,20 @@ extern void ledtrig_ide_activity(void); #define ledtrig_ide_activity() do {} while(0) #endif +/* + * Generic LED platform data for describing LED names and default triggers. + */ +struct led_info { + const char *name; + char *default_trigger; + int flags; +}; + +struct led_platform_data { + int num_leds; + struct led_info *leds; +}; + /* For the leds-gpio driver */ struct gpio_led { const char *name; diff --git a/include/linux/major.h b/include/linux/major.h index 0cb98053537..53d5fafd85c 100644 --- a/include/linux/major.h +++ b/include/linux/major.h @@ -53,7 +53,7 @@ #define STL_SIOMEMMAJOR 28 #define ACSI_MAJOR 28 #define AZTECH_CDROM_MAJOR 29 -#define GRAPHDEV_MAJOR 29 /* SparcLinux & Linux/68k /dev/fb */ +#define FB_MAJOR 29 /* /dev/fb* framebuffers */ #define CM206_CDROM_MAJOR 32 #define IDE2_MAJOR 33 #define IDE3_MAJOR 34 diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index ea9f5ad9ec8..763ba81fc0f 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -13,12 +13,12 @@ struct mem_section; #ifdef CONFIG_MEMORY_HOTPLUG /* - * Magic number for free bootmem. + * Types for free bootmem. * The normal smallest mapcount is -1. Here is smaller value than it. */ -#define SECTION_INFO 0xfffffffe -#define MIX_INFO 0xfffffffd -#define NODE_INFO 0xfffffffc +#define SECTION_INFO (-1 - 1) +#define MIX_SECTION_INFO (-1 - 2) +#define NODE_INFO (-1 - 3) /* * pgdat resizing functions @@ -199,6 +199,18 @@ extern int walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg, int (*func)(unsigned long, unsigned long, void *)); +#ifdef CONFIG_MEMORY_HOTREMOVE + +extern int is_mem_section_removable(unsigned long pfn, unsigned long nr_pages); + +#else +static inline int is_mem_section_removable(unsigned long pfn, + unsigned long nr_pages) +{ + return 0; +} +#endif /* CONFIG_MEMORY_HOTREMOVE */ + extern int add_memory(int nid, u64 start, u64 size); extern int arch_add_memory(int nid, u64 start, u64 size); extern int remove_memory(u64 start, u64 size); diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index 3a39570b81b..085c903fe0f 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -59,6 +59,7 @@ enum { #include <linux/rbtree.h> #include <linux/spinlock.h> #include <linux/nodemask.h> +#include <linux/pagemap.h> struct mm_struct; @@ -220,6 +221,24 @@ extern int mpol_parse_str(char *str, struct mempolicy **mpol, int no_context); extern int mpol_to_str(char *buffer, int maxlen, struct mempolicy *pol, int no_context); #endif + +/* Check if a vma is migratable */ +static inline int vma_migratable(struct vm_area_struct *vma) +{ + if (vma->vm_flags & (VM_IO|VM_HUGETLB|VM_PFNMAP|VM_RESERVED)) + return 0; + /* + * Migration allocates pages in the highest zone. If we cannot + * do so then migration (at least from node to node) is not + * possible. + */ + if (vma->vm_file && + gfp_zone(mapping_gfp_mask(vma->vm_file->f_mapping)) + < policy_zone) + return 0; + return 1; +} + #else struct mempolicy {}; diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h new file mode 100644 index 00000000000..bb3dd054592 --- /dev/null +++ b/include/linux/mfd/core.h @@ -0,0 +1,55 @@ +#ifndef MFD_CORE_H +#define MFD_CORE_H +/* + * drivers/mfd/mfd-core.h + * + * core MFD support + * Copyright (c) 2006 Ian Molton + * Copyright (c) 2007 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> + +/* + * This struct describes the MFD part ("cell"). + * After registration the copy of this structure will become the platform data + * of the resulting platform_device + */ +struct mfd_cell { + const char *name; + + int (*enable)(struct platform_device *dev); + int (*disable)(struct platform_device *dev); + int (*suspend)(struct platform_device *dev); + int (*resume)(struct platform_device *dev); + + void *driver_data; /* driver-specific data */ + + /* + * This resources can be specified relatievly to the parent device. + * For accessing device you should use resources from device + */ + int num_resources; + const struct resource *resources; +}; + +static inline struct mfd_cell * +mfd_get_cell(struct platform_device *pdev) +{ + return (struct mfd_cell *)pdev->dev.platform_data; +} + +extern int mfd_add_devices( + struct platform_device *parent, + const struct mfd_cell *cells, int n_devs, + struct resource *mem_base, + int irq_base); + +extern void mfd_remove_devices(struct platform_device *parent); + +#endif diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h new file mode 100644 index 00000000000..7cc824a58f7 --- /dev/null +++ b/include/linux/mfd/tc6393xb.h @@ -0,0 +1,49 @@ +/* + * Toshiba TC6393XB SoC support + * + * Copyright(c) 2005-2006 Chris Humbert + * Copyright(c) 2005 Dirk Opfer + * Copyright(c) 2005 Ian Molton <spyro@f2s.com> + * Copyright(c) 2007 Dmitry Baryshkov + * + * Based on code written by Sharp/Lineo for 2.4 kernels + * Based on locomo.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef TC6393XB_H +#define TC6393XB_H + +/* Also one should provide the CK3P6MI clock */ +struct tc6393xb_platform_data { + u16 scr_pll2cr; /* PLL2 Control */ + u16 scr_gper; /* GP Enable */ + u32 scr_gpo_doecr; /* GPO Data OE Control */ + u32 scr_gpo_dsr; /* GPO Data Set */ + + int (*enable)(struct platform_device *dev); + int (*disable)(struct platform_device *dev); + int (*suspend)(struct platform_device *dev); + int (*resume)(struct platform_device *dev); + + int irq_base; /* a base for cascaded irq */ + int gpio_base; + + struct tmio_nand_data *nand_data; +}; + +/* + * Relative to irq_base + */ +#define IRQ_TC6393_NAND 0 +#define IRQ_TC6393_MMC 1 +#define IRQ_TC6393_OHCI 2 +#define IRQ_TC6393_SERIAL 3 +#define IRQ_TC6393_FB 4 + +#define TC6393XB_NR_IRQS 8 + +#endif diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h new file mode 100644 index 00000000000..9438d8c9ac1 --- /dev/null +++ b/include/linux/mfd/tmio.h @@ -0,0 +1,17 @@ +#ifndef MFD_TMIO_H +#define MFD_TMIO_H + +/* + * data for the NAND controller + */ +struct tmio_nand_data { + struct nand_bbt_descr *badblock_pattern; + struct mtd_partition *partition; + unsigned int num_partitions; +}; + +#define TMIO_NAND_CONFIG "tmio-nand-config" +#define TMIO_NAND_CONTROL "tmio-nand-control" +#define TMIO_NAND_IRQ "tmio-nand" + +#endif diff --git a/include/linux/migrate.h b/include/linux/migrate.h index e10a90a93b5..03aea612d28 100644 --- a/include/linux/migrate.h +++ b/include/linux/migrate.h @@ -3,28 +3,10 @@ #include <linux/mm.h> #include <linux/mempolicy.h> -#include <linux/pagemap.h> typedef struct page *new_page_t(struct page *, unsigned long private, int **); #ifdef CONFIG_MIGRATION -/* Check if a vma is migratable */ -static inline int vma_migratable(struct vm_area_struct *vma) -{ - if (vma->vm_flags & (VM_IO|VM_HUGETLB|VM_PFNMAP|VM_RESERVED)) - return 0; - /* - * Migration allocates pages in the highest zone. If we cannot - * do so then migration (at least from node to node) is not - * possible. - */ - if (vma->vm_file && - gfp_zone(mapping_gfp_mask(vma->vm_file->f_mapping)) - < policy_zone) - return 0; - return 1; -} - extern int isolate_lru_page(struct page *p, struct list_head *pagelist); extern int putback_lru_pages(struct list_head *l); extern int migrate_page(struct address_space *, @@ -39,9 +21,6 @@ extern int migrate_vmas(struct mm_struct *mm, const nodemask_t *from, const nodemask_t *to, unsigned long flags); #else -static inline int vma_migratable(struct vm_area_struct *vma) - { return 0; } - static inline int isolate_lru_page(struct page *p, struct list_head *list) { return -ENOSYS; } static inline int putback_lru_pages(struct list_head *l) { return 0; } diff --git a/include/linux/mm.h b/include/linux/mm.h index 2128ef7780c..d87a5a5fe87 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -41,6 +41,9 @@ extern unsigned long mmap_min_addr; #define nth_page(page,n) pfn_to_page(page_to_pfn((page)) + (n)) +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) ALIGN(addr, PAGE_SIZE) + /* * Linux kernel virtual memory manager primitives. * The idea being to have a "virtual" mm in the same way @@ -100,6 +103,7 @@ extern unsigned int kobjsize(const void *objp); #define VM_DONTEXPAND 0x00040000 /* Cannot expand with mremap() */ #define VM_RESERVED 0x00080000 /* Count as reserved_vm like IO */ #define VM_ACCOUNT 0x00100000 /* Is a VM accounted object */ +#define VM_NORESERVE 0x00200000 /* should the VM suppress accounting */ #define VM_HUGETLB 0x00400000 /* Huge TLB Page VM */ #define VM_NONLINEAR 0x00800000 /* Is non-linear (remap_file_pages) */ #define VM_MAPPED_COPY 0x01000000 /* T if mapped copy of data (nommu mmap) */ @@ -166,12 +170,16 @@ struct vm_operations_struct { void (*open)(struct vm_area_struct * area); void (*close)(struct vm_area_struct * area); int (*fault)(struct vm_area_struct *vma, struct vm_fault *vmf); - unsigned long (*nopfn)(struct vm_area_struct *area, - unsigned long address); /* notification that a previously read-only page is about to become * writable, if an error is returned it will cause a SIGBUS */ int (*page_mkwrite)(struct vm_area_struct *vma, struct page *page); + + /* called by access_process_vm when get_user_pages() fails, typically + * for use by special VMAs that can switch between memory and hardware + */ + int (*access)(struct vm_area_struct *vma, unsigned long addr, + void *buf, int len, int write); #ifdef CONFIG_NUMA /* * set_policy() op must add a reference to any non-NULL @new mempolicy @@ -675,13 +683,6 @@ static inline int page_mapped(struct page *page) } /* - * Error return values for the *_nopfn functions - */ -#define NOPFN_SIGBUS ((unsigned long) -1) -#define NOPFN_OOM ((unsigned long) -2) -#define NOPFN_REFAULT ((unsigned long) -3) - -/* * Different kinds of faults, as returned by handle_mm_fault(). * Used to decide whether a process gets delivered SIGBUS or * just gets major/minor fault counters bumped up. @@ -772,14 +773,14 @@ struct mm_walk { int walk_page_range(unsigned long addr, unsigned long end, struct mm_walk *walk); -void free_pgd_range(struct mmu_gather **tlb, unsigned long addr, +void free_pgd_range(struct mmu_gather *tlb, unsigned long addr, unsigned long end, unsigned long floor, unsigned long ceiling); -void free_pgtables(struct mmu_gather **tlb, struct vm_area_struct *start_vma, - unsigned long floor, unsigned long ceiling); int copy_page_range(struct mm_struct *dst, struct mm_struct *src, struct vm_area_struct *vma); void unmap_mapping_range(struct address_space *mapping, loff_t const holebegin, loff_t const holelen, int even_cows); +int generic_access_phys(struct vm_area_struct *vma, unsigned long addr, + void *buf, int len, int write); static inline void unmap_shared_mapping_range(struct address_space *mapping, loff_t const holebegin, loff_t const holelen) @@ -965,9 +966,8 @@ static inline void pgtable_page_dtor(struct page *page) NULL: pte_offset_kernel(pmd, address)) extern void free_area_init(unsigned long * zones_size); -extern void free_area_init_node(int nid, pg_data_t *pgdat, - unsigned long * zones_size, unsigned long zone_start_pfn, - unsigned long *zholes_size); +extern void free_area_init_node(int nid, unsigned long * zones_size, + unsigned long zone_start_pfn, unsigned long *zholes_size); #ifdef CONFIG_ARCH_POPULATES_NODE_MAP /* * With CONFIG_ARCH_POPULATES_NODE_MAP set, an architecture may initialise its diff --git a/include/linux/module.h b/include/linux/module.h index fce15ebd0e1..68e09557c95 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -23,7 +23,7 @@ /* Not Yet Implemented */ #define MODULE_SUPPORTED_DEVICE(name) -/* v850 toolchain uses a `_' prefix for all user symbols */ +/* some toolchains uses a `_' prefix for all user symbols */ #ifndef MODULE_SYMBOL_PREFIX #define MODULE_SYMBOL_PREFIX "" #endif diff --git a/include/linux/net.h b/include/linux/net.h index 150a48c68d5..2f999fbb188 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -20,6 +20,7 @@ #include <linux/wait.h> #include <linux/socket.h> +#include <linux/fcntl.h> /* For O_CLOEXEC and O_NONBLOCK */ #include <asm/socket.h> struct poll_table_struct; @@ -46,6 +47,7 @@ struct net; #define SYS_GETSOCKOPT 15 /* sys_getsockopt(2) */ #define SYS_SENDMSG 16 /* sys_sendmsg(2) */ #define SYS_RECVMSG 17 /* sys_recvmsg(2) */ +#define SYS_PACCEPT 18 /* sys_paccept(2) */ typedef enum { SS_FREE = 0, /* not allocated */ @@ -94,6 +96,15 @@ enum sock_type { }; #define SOCK_MAX (SOCK_PACKET + 1) +/* Mask which covers at least up to SOCK_MASK-1. The + * remaining bits are used as flags. */ +#define SOCK_TYPE_MASK 0xf + +/* Flags for socket, socketpair, paccept */ +#define SOCK_CLOEXEC O_CLOEXEC +#ifndef SOCK_NONBLOCK +#define SOCK_NONBLOCK O_NONBLOCK +#endif #endif /* ARCH_HAS_SOCKET_TYPES */ @@ -208,10 +219,12 @@ extern int sock_sendmsg(struct socket *sock, struct msghdr *msg, size_t len); extern int sock_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int flags); -extern int sock_map_fd(struct socket *sock); +extern int sock_map_fd(struct socket *sock, int flags); extern struct socket *sockfd_lookup(int fd, int *err); #define sockfd_put(sock) fput(sock->file) extern int net_ratelimit(void); +extern long do_accept(int fd, struct sockaddr __user *upeer_sockaddr, + int __user *upeer_addrlen, int flags); #define net_random() random32() #define net_srandom(seed) srandom32((__force u32)seed) diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 0d2a4e7012a..54590a9a103 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -96,7 +96,22 @@ enum pageflags { #ifdef CONFIG_IA64_UNCACHED_ALLOCATOR PG_uncached, /* Page has been mapped as uncached */ #endif - __NR_PAGEFLAGS + __NR_PAGEFLAGS, + + /* Filesystems */ + PG_checked = PG_owner_priv_1, + + /* XEN */ + PG_pinned = PG_owner_priv_1, + PG_savepinned = PG_dirty, + + /* SLOB */ + PG_slob_page = PG_active, + PG_slob_free = PG_private, + + /* SLUB */ + PG_slub_frozen = PG_active, + PG_slub_debug = PG_error, }; #ifndef __GENERATING_BOUNDS_H @@ -155,13 +170,19 @@ PAGEFLAG(Dirty, dirty) TESTSCFLAG(Dirty, dirty) __CLEARPAGEFLAG(Dirty, dirty) PAGEFLAG(LRU, lru) __CLEARPAGEFLAG(LRU, lru) PAGEFLAG(Active, active) __CLEARPAGEFLAG(Active, active) __PAGEFLAG(Slab, slab) -PAGEFLAG(Checked, owner_priv_1) /* Used by some filesystems */ -PAGEFLAG(Pinned, owner_priv_1) TESTSCFLAG(Pinned, owner_priv_1) /* Xen */ -PAGEFLAG(SavePinned, dirty); /* Xen */ +PAGEFLAG(Checked, checked) /* Used by some filesystems */ +PAGEFLAG(Pinned, pinned) TESTSCFLAG(Pinned, pinned) /* Xen */ +PAGEFLAG(SavePinned, savepinned); /* Xen */ PAGEFLAG(Reserved, reserved) __CLEARPAGEFLAG(Reserved, reserved) PAGEFLAG(Private, private) __CLEARPAGEFLAG(Private, private) __SETPAGEFLAG(Private, private) +__PAGEFLAG(SlobPage, slob_page) +__PAGEFLAG(SlobFree, slob_free) + +__PAGEFLAG(SlubFrozen, slub_frozen) +__PAGEFLAG(SlubDebug, slub_debug) + /* * Only test-and-set exist for PG_writeback. The unconditional operators are * risky: they bypass page accounting. diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index d2fca802f80..ee1ec2c7723 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -22,7 +22,7 @@ static inline void mapping_set_error(struct address_space *mapping, int error) { - if (error) { + if (unlikely(error)) { if (error == -ENOSPC) set_bit(AS_ENOSPC, &mapping->flags); else diff --git a/include/linux/parser.h b/include/linux/parser.h index 7dcd0507575..cc554ca8bc7 100644 --- a/include/linux/parser.h +++ b/include/linux/parser.h @@ -14,7 +14,7 @@ struct match_token { const char *pattern; }; -typedef struct match_token match_table_t[]; +typedef const struct match_token match_table_t[]; /* Maximum number of arguments that match_token will find in a pattern */ enum {MAX_OPT_ARGS = 3}; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d8507eb394c..119ae7b8f02 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2371,6 +2371,14 @@ #define PCI_DEVICE_ID_INTEL_ICH9_7 0x2916 #define PCI_DEVICE_ID_INTEL_ICH9_8 0x2918 #define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340 +#define PCI_DEVICE_ID_INTEL_IOAT_TBG4 0x3429 +#define PCI_DEVICE_ID_INTEL_IOAT_TBG5 0x342a +#define PCI_DEVICE_ID_INTEL_IOAT_TBG6 0x342b +#define PCI_DEVICE_ID_INTEL_IOAT_TBG7 0x342c +#define PCI_DEVICE_ID_INTEL_IOAT_TBG0 0x3430 +#define PCI_DEVICE_ID_INTEL_IOAT_TBG1 0x3431 +#define PCI_DEVICE_ID_INTEL_IOAT_TBG2 0x3432 +#define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433 #define PCI_DEVICE_ID_INTEL_82830_HB 0x3575 #define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577 #define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580 diff --git a/include/linux/pm.h b/include/linux/pm.h index 4ad9de94449..4dcce54b6d7 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -22,78 +22,6 @@ #define _LINUX_PM_H #include <linux/list.h> -#include <asm/atomic.h> -#include <asm/errno.h> - -/* - * Power management requests... these are passed to pm_send_all() and friends. - * - * these functions are old and deprecated, see below. - */ -typedef int __bitwise pm_request_t; - -#define PM_SUSPEND ((__force pm_request_t) 1) /* enter D1-D3 */ -#define PM_RESUME ((__force pm_request_t) 2) /* enter D0 */ - - -/* - * Device types... these are passed to pm_register - */ -typedef int __bitwise pm_dev_t; - -#define PM_UNKNOWN_DEV ((__force pm_dev_t) 0) /* generic */ -#define PM_SYS_DEV ((__force pm_dev_t) 1) /* system device (fan, KB controller, ...) */ -#define PM_PCI_DEV ((__force pm_dev_t) 2) /* PCI device */ -#define PM_USB_DEV ((__force pm_dev_t) 3) /* USB device */ -#define PM_SCSI_DEV ((__force pm_dev_t) 4) /* SCSI device */ -#define PM_ISA_DEV ((__force pm_dev_t) 5) /* ISA device */ -#define PM_MTD_DEV ((__force pm_dev_t) 6) /* Memory Technology Device */ - -/* - * System device hardware ID (PnP) values - */ -enum -{ - PM_SYS_UNKNOWN = 0x00000000, /* generic */ - PM_SYS_KBC = 0x41d00303, /* keyboard controller */ - PM_SYS_COM = 0x41d00500, /* serial port */ - PM_SYS_IRDA = 0x41d00510, /* IRDA controller */ - PM_SYS_FDC = 0x41d00700, /* floppy controller */ - PM_SYS_VGA = 0x41d00900, /* VGA controller */ - PM_SYS_PCMCIA = 0x41d00e00, /* PCMCIA controller */ -}; - -/* - * Device identifier - */ -#define PM_PCI_ID(dev) ((dev)->bus->number << 16 | (dev)->devfn) - -/* - * Request handler callback - */ -struct pm_dev; - -typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data); - -/* - * Dynamic device information - */ -struct pm_dev -{ - pm_dev_t type; - unsigned long id; - pm_callback callback; - void *data; - - unsigned long flags; - unsigned long state; - unsigned long prev_state; - - struct list_head entry; -}; - -/* Functions above this comment are list-based old-style power - * management. Please avoid using them. */ /* * Callbacks for platform drivers to implement. @@ -317,6 +245,21 @@ struct pm_ext_ops { * RECOVER Creation of a hibernation image or restoration of the main * memory contents from a hibernation image has failed, call * ->thaw() and ->complete() for all devices. + * + * The following PM_EVENT_ messages are defined for internal use by + * kernel subsystems. They are never issued by the PM core. + * + * USER_SUSPEND Manual selective suspend was issued by userspace. + * + * USER_RESUME Manual selective resume was issued by userspace. + * + * REMOTE_WAKEUP Remote-wakeup request was received from the device. + * + * AUTO_SUSPEND Automatic (device idle) runtime suspend was + * initiated by the subsystem. + * + * AUTO_RESUME Automatic (device needed) runtime resume was + * requested by a driver. */ #define PM_EVENT_ON 0x0000 @@ -328,9 +271,18 @@ struct pm_ext_ops { #define PM_EVENT_THAW 0x0020 #define PM_EVENT_RESTORE 0x0040 #define PM_EVENT_RECOVER 0x0080 +#define PM_EVENT_USER 0x0100 +#define PM_EVENT_REMOTE 0x0200 +#define PM_EVENT_AUTO 0x0400 -#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE) +#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE) +#define PM_EVENT_USER_SUSPEND (PM_EVENT_USER | PM_EVENT_SUSPEND) +#define PM_EVENT_USER_RESUME (PM_EVENT_USER | PM_EVENT_RESUME) +#define PM_EVENT_REMOTE_WAKEUP (PM_EVENT_REMOTE | PM_EVENT_RESUME) +#define PM_EVENT_AUTO_SUSPEND (PM_EVENT_AUTO | PM_EVENT_SUSPEND) +#define PM_EVENT_AUTO_RESUME (PM_EVENT_AUTO | PM_EVENT_RESUME) +#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) #define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) #define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, }) #define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, }) @@ -339,7 +291,16 @@ struct pm_ext_ops { #define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, }) #define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, }) #define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, }) -#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) +#define PMSG_USER_SUSPEND ((struct pm_messge) \ + { .event = PM_EVENT_USER_SUSPEND, }) +#define PMSG_USER_RESUME ((struct pm_messge) \ + { .event = PM_EVENT_USER_RESUME, }) +#define PMSG_REMOTE_RESUME ((struct pm_messge) \ + { .event = PM_EVENT_REMOTE_RESUME, }) +#define PMSG_AUTO_SUSPEND ((struct pm_messge) \ + { .event = PM_EVENT_AUTO_SUSPEND, }) +#define PMSG_AUTO_RESUME ((struct pm_messge) \ + { .event = PM_EVENT_AUTO_RESUME, }) /** * Device power management states diff --git a/include/linux/pm_legacy.h b/include/linux/pm_legacy.h deleted file mode 100644 index 446f4f42b95..00000000000 --- a/include/linux/pm_legacy.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef __LINUX_PM_LEGACY_H__ -#define __LINUX_PM_LEGACY_H__ - - -#ifdef CONFIG_PM_LEGACY - -/* - * Register a device with power management - */ -struct pm_dev __deprecated * -pm_register(pm_dev_t type, unsigned long id, pm_callback callback); - -/* - * Send a request to all devices - */ -int __deprecated pm_send_all(pm_request_t rqst, void *data); - -#else /* CONFIG_PM_LEGACY */ - -static inline struct pm_dev *pm_register(pm_dev_t type, - unsigned long id, - pm_callback callback) -{ - return NULL; -} - -static inline int pm_send_all(pm_request_t rqst, void *data) -{ - return 0; -} - -#endif /* CONFIG_PM_LEGACY */ - -#endif /* __LINUX_PM_LEGACY_H__ */ - diff --git a/include/linux/rtc.h b/include/linux/rtc.h index f2d0d152772..b01fe004cb5 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -115,6 +115,23 @@ extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm); extern struct class *rtc_class; +/* + * For these RTC methods the device parameter is the physical device + * on whatever bus holds the hardware (I2C, Platform, SPI, etc), which + * was passed to rtc_device_register(). Its driver_data normally holds + * device state, including the rtc_device pointer for the RTC. + * + * Most of these methods are called with rtc_device.ops_lock held, + * through the rtc_*(struct rtc_device *, ...) calls. + * + * The (current) exceptions are mostly filesystem hooks: + * - the proc() hook for procfs + * - non-ioctl() chardev hooks: open(), release(), read_callback() + * - periodic irq calls: irq_set_state(), irq_set_freq() + * + * REVISIT those periodic irq calls *do* have ops_lock when they're + * issued through ioctl() ... + */ struct rtc_class_ops { int (*open)(struct device *); void (*release)(struct device *); diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h index 71fc8136004..e5996984ddd 100644 --- a/include/linux/scatterlist.h +++ b/include/linux/scatterlist.h @@ -224,4 +224,42 @@ size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents, */ #define SG_MAX_SINGLE_ALLOC (PAGE_SIZE / sizeof(struct scatterlist)) + +/* + * Mapping sg iterator + * + * Iterates over sg entries mapping page-by-page. On each successful + * iteration, @miter->page points to the mapped page and + * @miter->length bytes of data can be accessed at @miter->addr. As + * long as an interation is enclosed between start and stop, the user + * is free to choose control structure and when to stop. + * + * @miter->consumed is set to @miter->length on each iteration. It + * can be adjusted if the user can't consume all the bytes in one go. + * Also, a stopped iteration can be resumed by calling next on it. + * This is useful when iteration needs to release all resources and + * continue later (e.g. at the next interrupt). + */ + +#define SG_MITER_ATOMIC (1 << 0) /* use kmap_atomic */ + +struct sg_mapping_iter { + /* the following three fields can be accessed directly */ + struct page *page; /* currently mapped page */ + void *addr; /* pointer to the mapped area */ + size_t length; /* length of the mapped area */ + size_t consumed; /* number of consumed bytes */ + + /* these are internal states, keep away */ + struct scatterlist *__sg; /* current entry */ + unsigned int __nents; /* nr of remaining entries */ + unsigned int __offset; /* offset within sg */ + unsigned int __flags; +}; + +void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl, + unsigned int nents, unsigned int flags); +bool sg_miter_next(struct sg_mapping_iter *miter); +void sg_miter_stop(struct sg_mapping_iter *miter); + #endif /* _LINUX_SCATTERLIST_H */ diff --git a/include/linux/sched.h b/include/linux/sched.h index 1941d8b5cf1..6aca4a16e37 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -295,10 +295,11 @@ extern void softlockup_tick(void); extern void spawn_softlockup_task(void); extern void touch_softlockup_watchdog(void); extern void touch_all_softlockup_watchdogs(void); -extern unsigned long softlockup_thresh; +extern unsigned int softlockup_panic; extern unsigned long sysctl_hung_task_check_count; extern unsigned long sysctl_hung_task_timeout_secs; extern unsigned long sysctl_hung_task_warnings; +extern int softlockup_thresh; #else static inline void softlockup_tick(void) { @@ -824,7 +825,16 @@ extern void partition_sched_domains(int ndoms_new, cpumask_t *doms_new, struct sched_domain_attr *dattr_new); extern int arch_reinit_sched_domains(void); -#endif /* CONFIG_SMP */ +#else /* CONFIG_SMP */ + +struct sched_domain_attr; + +static inline void +partition_sched_domains(int ndoms_new, cpumask_t *doms_new, + struct sched_domain_attr *dattr_new) +{ +} +#endif /* !CONFIG_SMP */ struct io_context; /* See blkdev.h */ #define NGROUPS_SMALL 32 @@ -1973,6 +1983,13 @@ static inline unsigned long *end_of_stack(struct task_struct *p) #endif +static inline int object_is_on_stack(void *obj) +{ + void *stack = task_stack_page(current); + + return (obj >= stack) && (obj < (stack + THREAD_SIZE)); +} + extern void thread_info_cache_init(void); /* set thread flags in other task's structures diff --git a/include/linux/security.h b/include/linux/security.h index 31c8851ec5d..f0e9adb22ac 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -102,9 +102,7 @@ extern unsigned long mmap_min_addr; #define LSM_SETID_FS 8 /* forward declares to avoid warnings */ -struct nfsctl_arg; struct sched_param; -struct swap_info_struct; struct request_sock; /* bprm_apply_creds unsafe reasons */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index f3a1c0e4502..3b2f6c04855 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -59,9 +59,6 @@ #define PORT_SUNZILOG 38 #define PORT_SUNSAB 39 -/* NEC v850. */ -#define PORT_V850E_UART 40 - /* DEC */ #define PORT_DZ 46 #define PORT_ZS 47 diff --git a/include/linux/signalfd.h b/include/linux/signalfd.h index ea037f28df9..bef0c46d471 100644 --- a/include/linux/signalfd.h +++ b/include/linux/signalfd.h @@ -8,6 +8,12 @@ #ifndef _LINUX_SIGNALFD_H #define _LINUX_SIGNALFD_H +/* For O_CLOEXEC and O_NONBLOCK */ +#include <linux/fcntl.h> + +/* Flags for signalfd4. */ +#define SFD_CLOEXEC O_CLOEXEC +#define SFD_NONBLOCK O_NONBLOCK struct signalfd_siginfo { __u32 ssi_signo; diff --git a/include/linux/slab.h b/include/linux/slab.h index 9aa90a6f20e..41103910f8a 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -180,7 +180,7 @@ size_t ksize(const void *); */ static inline void *kcalloc(size_t n, size_t size, gfp_t flags) { - if (n != 0 && size > ULONG_MAX / n) + if (size != 0 && n > ULONG_MAX / size) return NULL; return __kmalloc(n * size, flags | __GFP_ZERO); } diff --git a/include/linux/sm501.h b/include/linux/sm501.h index 95c1c39ba44..b530fa6a1d3 100644 --- a/include/linux/sm501.h +++ b/include/linux/sm501.h @@ -73,6 +73,8 @@ extern unsigned long sm501_gpio_get(struct device *dev, #define SM501FB_FLAG_USE_HWACCEL (1<<3) #define SM501FB_FLAG_PANEL_NO_FPEN (1<<4) #define SM501FB_FLAG_PANEL_NO_VBIASEN (1<<5) +#define SM501FB_FLAG_PANEL_INV_FPEN (1<<6) +#define SM501FB_FLAG_PANEL_INV_VBIASEN (1<<7) struct sm501_platdata_fbsub { struct fb_videomode *def_mode; diff --git a/include/linux/smc91x.h b/include/linux/smc91x.h index 8e0556b8781..3827b922ba1 100644 --- a/include/linux/smc91x.h +++ b/include/linux/smc91x.h @@ -5,9 +5,19 @@ #define SMC91X_USE_16BIT (1 << 1) #define SMC91X_USE_32BIT (1 << 2) +#define SMC91X_NOWAIT (1 << 3) + +/* two bits for IO_SHIFT, let's hope later designs will keep this sane */ +#define SMC91X_IO_SHIFT_0 (0 << 4) +#define SMC91X_IO_SHIFT_1 (1 << 4) +#define SMC91X_IO_SHIFT_2 (2 << 4) +#define SMC91X_IO_SHIFT_3 (3 << 4) +#define SMC91X_IO_SHIFT(x) (((x) >> 4) & 0x3) + +#define SMC91X_USE_DMA (1 << 6) + struct smc91x_platdata { unsigned long flags; - unsigned long irq_flags; /* IRQF_... */ }; #endif /* __SMC91X_H__ */ diff --git a/include/linux/spi/ds1305.h b/include/linux/spi/ds1305.h new file mode 100644 index 00000000000..287ec830eab --- /dev/null +++ b/include/linux/spi/ds1305.h @@ -0,0 +1,35 @@ +#ifndef __LINUX_SPI_DS1305_H +#define __LINUX_SPI_DS1305_H + +/* + * One-time configuration for ds1305 and ds1306 RTC chips. + * + * Put a pointer to this in spi_board_info.platform_data if you want to + * be sure that Linux (re)initializes this as needed ... after losing + * backup power, and potentially on the first boot. + */ +struct ds1305_platform_data { + + /* Trickle charge configuration: it's OK to leave out the MAGIC + * bitmask; mask in either DS1 or DS2, and then one of 2K/4k/8K. + */ +#define DS1305_TRICKLE_MAGIC 0xa0 +#define DS1305_TRICKLE_DS2 0x08 /* two diodes */ +#define DS1305_TRICKLE_DS1 0x04 /* one diode */ +#define DS1305_TRICKLE_2K 0x01 /* 2 KOhm resistance */ +#define DS1305_TRICKLE_4K 0x02 /* 4 KOhm resistance */ +#define DS1305_TRICKLE_8K 0x03 /* 8 KOhm resistance */ + u8 trickle; + + /* set only on ds1306 parts */ + bool is_ds1306; + + /* ds1306 only: enable 1 Hz output */ + bool en_1hz; + + /* REVISIT: the driver currently expects nINT0 to be wired + * as the alarm IRQ. ALM1 may also need to be set up ... + */ +}; + +#endif /* __LINUX_SPI_DS1305_H */ diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index b9a76c97208..a9cc29d4665 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -82,7 +82,7 @@ struct spi_device { int irq; void *controller_state; void *controller_data; - const char *modalias; + char modalias[32]; /* * likely need more hooks for more protocol options affecting how diff --git a/include/linux/string.h b/include/linux/string.h index efdc44593b5..810d80df0a1 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -111,5 +111,8 @@ extern void argv_free(char **argv); extern bool sysfs_streq(const char *s1, const char *s2); +extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos, + const void *from, size_t available); + #endif #endif /* _LINUX_STRING_H_ */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 0522f368f9d..06f2bf76c03 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -305,6 +305,7 @@ asmlinkage long sys_fcntl64(unsigned int fd, #endif asmlinkage long sys_dup(unsigned int fildes); asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd); +asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags); asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int on); asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg); @@ -409,6 +410,8 @@ asmlinkage long sys_getsockopt(int fd, int level, int optname, asmlinkage long sys_bind(int, struct sockaddr __user *, int); asmlinkage long sys_connect(int, struct sockaddr __user *, int); asmlinkage long sys_accept(int, struct sockaddr __user *, int __user *); +asmlinkage long sys_paccept(int, struct sockaddr __user *, int __user *, + const sigset_t *, size_t, int); asmlinkage long sys_getsockname(int, struct sockaddr __user *, int __user *); asmlinkage long sys_getpeername(int, struct sockaddr __user *, int __user *); asmlinkage long sys_send(int, void __user *, size_t, unsigned); @@ -428,6 +431,7 @@ asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds, asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp, struct timeval __user *tvp); asmlinkage long sys_epoll_create(int size); +asmlinkage long sys_epoll_create1(int flags); asmlinkage long sys_epoll_ctl(int epfd, int op, int fd, struct epoll_event __user *event); asmlinkage long sys_epoll_wait(int epfd, struct epoll_event __user *events, @@ -443,7 +447,7 @@ asmlinkage long sys_newuname(struct new_utsname __user *name); asmlinkage long sys_getrlimit(unsigned int resource, struct rlimit __user *rlim); -#if defined(COMPAT_RLIM_OLD_INFINITY) || !(defined(CONFIG_IA64) || defined(CONFIG_V850)) +#if defined(COMPAT_RLIM_OLD_INFINITY) || !(defined(CONFIG_IA64)) asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim); #endif asmlinkage long sys_setrlimit(unsigned int resource, @@ -543,6 +547,7 @@ asmlinkage long sys_get_mempolicy(int __user *policy, unsigned long addr, unsigned long flags); asmlinkage long sys_inotify_init(void); +asmlinkage long sys_inotify_init1(int flags); asmlinkage long sys_inotify_add_watch(int fd, const char __user *path, u32 mask); asmlinkage long sys_inotify_rm_watch(int fd, u32 wd); @@ -608,12 +613,14 @@ asmlinkage long sys_set_robust_list(struct robust_list_head __user *head, size_t len); asmlinkage long sys_getcpu(unsigned __user *cpu, unsigned __user *node, struct getcpu_cache __user *cache); asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask, size_t sizemask); +asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask, size_t sizemask, int flags); asmlinkage long sys_timerfd_create(int clockid, int flags); asmlinkage long sys_timerfd_settime(int ufd, int flags, const struct itimerspec __user *utmr, struct itimerspec __user *otmr); asmlinkage long sys_timerfd_gettime(int ufd, struct itimerspec __user *otmr); asmlinkage long sys_eventfd(unsigned int count); +asmlinkage long sys_eventfd2(unsigned int count, int flags); asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len); int kernel_execve(const char *filename, char *const argv[], char *const envp[]); diff --git a/include/linux/timerfd.h b/include/linux/timerfd.h index cf2b10d7573..86cb0501d3e 100644 --- a/include/linux/timerfd.h +++ b/include/linux/timerfd.h @@ -8,9 +8,15 @@ #ifndef _LINUX_TIMERFD_H #define _LINUX_TIMERFD_H +/* For O_CLOEXEC and O_NONBLOCK */ +#include <linux/fcntl.h> +/* Flags for timerfd_settime. */ #define TFD_TIMER_ABSTIME (1 << 0) +/* Flags for timerfd_create. */ +#define TFD_CLOEXEC O_CLOEXEC +#define TFD_NONBLOCK O_NONBLOCK #endif /* _LINUX_TIMERFD_H */ diff --git a/include/linux/vmstat.h b/include/linux/vmstat.h index e83b69346d2..58334d43951 100644 --- a/include/linux/vmstat.h +++ b/include/linux/vmstat.h @@ -44,6 +44,12 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT, NR_VM_EVENT_ITEMS }; +extern const struct seq_operations fragmentation_op; +extern const struct seq_operations pagetypeinfo_op; +extern const struct seq_operations zoneinfo_op; +extern const struct seq_operations vmstat_op; +extern int sysctl_stat_interval; + #ifdef CONFIG_VM_EVENT_COUNTERS /* * Light weight per cpu counter implementation. diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 542526c6e8e..14d47120682 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -179,6 +179,8 @@ __create_workqueue_key(const char *name, int singlethread, extern void destroy_workqueue(struct workqueue_struct *wq); extern int queue_work(struct workqueue_struct *wq, struct work_struct *work); +extern int queue_work_on(int cpu, struct workqueue_struct *wq, + struct work_struct *work); extern int queue_delayed_work(struct workqueue_struct *wq, struct delayed_work *work, unsigned long delay); extern int queue_delayed_work_on(int cpu, struct workqueue_struct *wq, @@ -188,6 +190,7 @@ extern void flush_workqueue(struct workqueue_struct *wq); extern void flush_scheduled_work(void); extern int schedule_work(struct work_struct *work); +extern int schedule_work_on(int cpu, struct work_struct *work); extern int schedule_delayed_work(struct delayed_work *work, unsigned long delay); extern int schedule_delayed_work_on(int cpu, struct delayed_work *work, unsigned long delay); diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h index ed64862c4e1..1ccf462b433 100644 --- a/include/video/atmel_lcdc.h +++ b/include/video/atmel_lcdc.h @@ -37,6 +37,7 @@ struct atmel_lcdfb_info { struct fb_info *info; void __iomem *mmio; unsigned long irq_base; + struct work_struct task; unsigned int guard_time; struct platform_device *pdev; diff --git a/include/video/ili9320.h b/include/video/ili9320.h new file mode 100644 index 00000000000..e5d1622e3f3 --- /dev/null +++ b/include/video/ili9320.h @@ -0,0 +1,201 @@ +/* include/video/ili9320.c + * + * ILI9320 LCD controller configuration control. + * + * Copyright 2007 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define ILI9320_REG(x) (x) + +#define ILI9320_INDEX ILI9320_REG(0x00) + +#define ILI9320_OSCILATION ILI9320_REG(0x00) +#define ILI9320_DRIVER ILI9320_REG(0x01) +#define ILI9320_DRIVEWAVE ILI9320_REG(0x02) +#define ILI9320_ENTRYMODE ILI9320_REG(0x03) +#define ILI9320_RESIZING ILI9320_REG(0x04) +#define ILI9320_DISPLAY1 ILI9320_REG(0x07) +#define ILI9320_DISPLAY2 ILI9320_REG(0x08) +#define ILI9320_DISPLAY3 ILI9320_REG(0x09) +#define ILI9320_DISPLAY4 ILI9320_REG(0x0A) +#define ILI9320_RGB_IF1 ILI9320_REG(0x0C) +#define ILI9320_FRAMEMAKER ILI9320_REG(0x0D) +#define ILI9320_RGB_IF2 ILI9320_REG(0x0F) + +#define ILI9320_POWER1 ILI9320_REG(0x10) +#define ILI9320_POWER2 ILI9320_REG(0x11) +#define ILI9320_POWER3 ILI9320_REG(0x12) +#define ILI9320_POWER4 ILI9320_REG(0x13) +#define ILI9320_GRAM_HORIZ_ADDR ILI9320_REG(0x20) +#define ILI9320_GRAM_VERT_ADD ILI9320_REG(0x21) +#define ILI9320_POWER7 ILI9320_REG(0x29) +#define ILI9320_FRAME_RATE_COLOUR ILI9320_REG(0x2B) + +#define ILI9320_GAMMA1 ILI9320_REG(0x30) +#define ILI9320_GAMMA2 ILI9320_REG(0x31) +#define ILI9320_GAMMA3 ILI9320_REG(0x32) +#define ILI9320_GAMMA4 ILI9320_REG(0x35) +#define ILI9320_GAMMA5 ILI9320_REG(0x36) +#define ILI9320_GAMMA6 ILI9320_REG(0x37) +#define ILI9320_GAMMA7 ILI9320_REG(0x38) +#define ILI9320_GAMMA8 ILI9320_REG(0x39) +#define ILI9320_GAMMA9 ILI9320_REG(0x3C) +#define ILI9320_GAMMA10 ILI9320_REG(0x3D) + +#define ILI9320_HORIZ_START ILI9320_REG(0x50) +#define ILI9320_HORIZ_END ILI9320_REG(0x51) +#define ILI9320_VERT_START ILI9320_REG(0x52) +#define ILI9320_VERT_END ILI9320_REG(0x53) + +#define ILI9320_DRIVER2 ILI9320_REG(0x60) +#define ILI9320_BASE_IMAGE ILI9320_REG(0x61) +#define ILI9320_VERT_SCROLL ILI9320_REG(0x6a) + +#define ILI9320_PARTIAL1_POSITION ILI9320_REG(0x80) +#define ILI9320_PARTIAL1_START ILI9320_REG(0x81) +#define ILI9320_PARTIAL1_END ILI9320_REG(0x82) +#define ILI9320_PARTIAL2_POSITION ILI9320_REG(0x83) +#define ILI9320_PARTIAL2_START ILI9320_REG(0x84) +#define ILI9320_PARTIAL2_END ILI9320_REG(0x85) + +#define ILI9320_INTERFACE1 ILI9320_REG(0x90) +#define ILI9320_INTERFACE2 ILI9320_REG(0x92) +#define ILI9320_INTERFACE3 ILI9320_REG(0x93) +#define ILI9320_INTERFACE4 ILI9320_REG(0x95) +#define ILI9320_INTERFACE5 ILI9320_REG(0x97) +#define ILI9320_INTERFACE6 ILI9320_REG(0x98) + +/* Register contents definitions. */ + +#define ILI9320_OSCILATION_OSC (1 << 0) + +#define ILI9320_DRIVER_SS (1 << 8) +#define ILI9320_DRIVER_SM (1 << 10) + +#define ILI9320_DRIVEWAVE_EOR (1 << 8) +#define ILI9320_DRIVEWAVE_BC (1 << 9) +#define ILI9320_DRIVEWAVE_MUSTSET (1 << 10) + +#define ILI9320_ENTRYMODE_AM (1 << 3) +#define ILI9320_ENTRYMODE_ID(x) ((x) << 4) +#define ILI9320_ENTRYMODE_ORG (1 << 7) +#define ILI9320_ENTRYMODE_HWM (1 << 8) +#define ILI9320_ENTRYMODE_BGR (1 << 12) +#define ILI9320_ENTRYMODE_DFM (1 << 14) +#define ILI9320_ENTRYMODE_TRI (1 << 15) + + +#define ILI9320_RESIZING_RSZ(x) ((x) << 0) +#define ILI9320_RESIZING_RCH(x) ((x) << 4) +#define ILI9320_RESIZING_RCV(x) ((x) << 8) + + +#define ILI9320_DISPLAY1_D(x) ((x) << 0) +#define ILI9320_DISPLAY1_CL (1 << 3) +#define ILI9320_DISPLAY1_DTE (1 << 4) +#define ILI9320_DISPLAY1_GON (1 << 5) +#define ILI9320_DISPLAY1_BASEE (1 << 8) +#define ILI9320_DISPLAY1_PTDE(x) ((x) << 12) + + +#define ILI9320_DISPLAY2_BP(x) ((x) << 0) +#define ILI9320_DISPLAY2_FP(x) ((x) << 8) + + +#define ILI9320_RGBIF1_RIM_RGB18 (0 << 0) +#define ILI9320_RGBIF1_RIM_RGB16 (1 << 0) +#define ILI9320_RGBIF1_RIM_RGB6 (2 << 0) + +#define ILI9320_RGBIF1_CLK_INT (0 << 4) +#define ILI9320_RGBIF1_CLK_RGBIF (1 << 4) +#define ILI9320_RGBIF1_CLK_VSYNC (2 << 4) + +#define ILI9320_RGBIF1_RM (1 << 8) + +#define ILI9320_RGBIF1_ENC_FRAMES(x) (((x) - 1)<< 13) + +#define ILI9320_RGBIF2_DPL (1 << 0) +#define ILI9320_RGBIF2_EPL (1 << 1) +#define ILI9320_RGBIF2_HSPL (1 << 3) +#define ILI9320_RGBIF2_VSPL (1 << 4) + + +#define ILI9320_POWER1_SLP (1 << 1) +#define ILI9320_POWER1_DSTB (1 << 2) +#define ILI9320_POWER1_AP(x) ((x) << 4) +#define ILI9320_POWER1_APE (1 << 7) +#define ILI9320_POWER1_BT(x) ((x) << 8) +#define ILI9320_POWER1_SAP (1 << 12) + + +#define ILI9320_POWER2_VC(x) ((x) << 0) +#define ILI9320_POWER2_DC0(x) ((x) << 4) +#define ILI9320_POWER2_DC1(x) ((x) << 8) + + +#define ILI9320_POWER3_VRH(x) ((x) << 0) +#define ILI9320_POWER3_PON (1 << 4) +#define ILI9320_POWER3_VCMR (1 << 8) + + +#define ILI9320_POWER4_VREOUT(x) ((x) << 8) + + +#define ILI9320_DRIVER2_SCNL(x) ((x) << 0) +#define ILI9320_DRIVER2_NL(x) ((x) << 8) +#define ILI9320_DRIVER2_GS (1 << 15) + + +#define ILI9320_BASEIMAGE_REV (1 << 0) +#define ILI9320_BASEIMAGE_VLE (1 << 1) +#define ILI9320_BASEIMAGE_NDL (1 << 2) + + +#define ILI9320_INTERFACE4_RTNE(x) (x) +#define ILI9320_INTERFACE4_DIVE(x) ((x) << 8) + +/* SPI interface definitions */ + +#define ILI9320_SPI_IDCODE (0x70) +#define ILI9320_SPI_ID(x) ((x) << 2) +#define ILI9320_SPI_READ (0x01) +#define ILI9320_SPI_WRITE (0x00) +#define ILI9320_SPI_DATA (0x02) +#define ILI9320_SPI_INDEX (0x00) + +/* platform data to pass configuration from lcd */ + +enum ili9320_suspend { + ILI9320_SUSPEND_OFF, + ILI9320_SUSPEND_DEEP, +}; + +struct ili9320_platdata { + unsigned short hsize; + unsigned short vsize; + + enum ili9320_suspend suspend; + + /* set the reset line, 0 = reset asserted, 1 = normal */ + void (*reset)(unsigned int val); + + unsigned short entry_mode; + unsigned short display2; + unsigned short display3; + unsigned short display4; + unsigned short rgb_if1; + unsigned short rgb_if2; + unsigned short interface2; + unsigned short interface3; + unsigned short interface4; + unsigned short interface5; + unsigned short interface6; +}; + diff --git a/include/video/neomagic.h b/include/video/neomagic.h index a9e118a1cd1..38910da0ae5 100644 --- a/include/video/neomagic.h +++ b/include/video/neomagic.h @@ -90,23 +90,6 @@ #define PCI_CHIP_NM2360 0x0006 #define PCI_CHIP_NM2380 0x0016 - -struct xtimings { - unsigned int pixclock; - unsigned int HDisplay; - unsigned int HSyncStart; - unsigned int HSyncEnd; - unsigned int HTotal; - unsigned int VDisplay; - unsigned int VSyncStart; - unsigned int VSyncEnd; - unsigned int VTotal; - unsigned int sync; - int dblscan; - int interlaced; -}; - - /* --------------------------------------------------------------------- */ typedef volatile struct { diff --git a/include/video/platform_lcd.h b/include/video/platform_lcd.h new file mode 100644 index 00000000000..ad3bdfe743b --- /dev/null +++ b/include/video/platform_lcd.h @@ -0,0 +1,21 @@ +/* include/video/platform_lcd.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * Generic platform-device LCD power control interface. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +struct plat_lcd_data; +struct fb_info; + +struct plat_lcd_data { + void (*set_power)(struct plat_lcd_data *, unsigned int power); + int (*match_fb)(struct plat_lcd_data *, struct fb_info *); +}; + diff --git a/include/video/trident.h b/include/video/trident.h index 200be255168..b6ce19d1b61 100644 --- a/include/video/trident.h +++ b/include/video/trident.h @@ -4,9 +4,9 @@ #endif #if TRIDENTFB_DEBUG -#define debug(f,a...) printk("%s:" f, __FUNCTION__ , ## a);mdelay(1000); +#define debug(f, a...) printk("%s:" f, __func__ , ## a); #else -#define debug(f,a...) +#define debug(f, a...) #endif #define output(f, a...) pr_info("tridentfb: " f, ## a) @@ -24,7 +24,9 @@ #define CYBER9397DVD 0x939A #define CYBER9520 0x9520 #define CYBER9525DVD 0x9525 +#define TGUI9440 0x9440 #define TGUI9660 0x9660 +#define PROVIDIA9685 0x9685 #define IMAGE975 0x9750 #define IMAGE985 0x9850 #define BLADE3D 0x9880 @@ -39,36 +41,11 @@ #define CYBERBLADEXPm8 0x9910 #define CYBERBLADEXPm16 0x9930 -/* acceleration families */ -#define IMAGE 0 -#define BLADE 1 -#define XP 2 - -#define is_image(id) -#define is_xp(id) ((id == CYBERBLADEXPAi1) ||\ - (id == CYBERBLADEXPm8) ||\ - (id == CYBERBLADEXPm16)) - -#define is_blade(id) ((id == BLADE3D) ||\ - (id == CYBERBLADEE4) ||\ - (id == CYBERBLADEi7) ||\ - (id == CYBERBLADEi7D) ||\ - (id == CYBERBLADEi1) ||\ - (id == CYBERBLADEi1D) ||\ - (id == CYBERBLADEAi1) ||\ - (id == CYBERBLADEAi1D)) - /* these defines are for 'lcd' variable */ #define LCD_STRETCH 0 #define LCD_CENTER 1 #define LCD_BIOS 2 -/* display types */ -#define DISPLAY_CRT 0 -#define DISPLAY_FP 1 - -#define flatpanel (displaytype == DISPLAY_FP) - /* General Registers */ #define SPR 0x1F /* Software Programming Register (videoram) */ @@ -88,33 +65,7 @@ #define SKey 0x37 #define SPKey 0x57 -/* 0x3x4 */ -#define CRTHTotal 0x00 -#define CRTHDispEnd 0x01 -#define CRTHBlankStart 0x02 -#define CRTHBlankEnd 0x03 -#define CRTHSyncStart 0x04 -#define CRTHSyncEnd 0x05 - -#define CRTVTotal 0x06 -#define CRTVDispEnd 0x12 -#define CRTVBlankStart 0x15 -#define CRTVBlankEnd 0x16 -#define CRTVSyncStart 0x10 -#define CRTVSyncEnd 0x11 - -#define CRTOverflow 0x07 -#define CRTPRowScan 0x08 -#define CRTMaxScanLine 0x09 -#define CRTModeControl 0x17 -#define CRTLineCompare 0x18 - /* 3x4 */ -#define StartAddrHigh 0x0C -#define StartAddrLow 0x0D -#define Offset 0x13 -#define Underline 0x14 -#define CRTCMode 0x17 #define CRTCModuleTest 0x1E #define FIFOControl 0x20 #define LinearAddReg 0x21 @@ -173,3 +124,23 @@ #define BiosMode 0x5c #define BiosReg 0x5d +/* Graphics Engine */ +#define STATUS 0x2120 +#define OLDCMD 0x2124 +#define DRAWFL 0x2128 +#define OLDCLR 0x212C +#define OLDDST 0x2138 +#define OLDSRC 0x213C +#define OLDDIM 0x2140 +#define CMD 0x2144 +#define ROP 0x2148 +#define COLOR 0x2160 +#define BGCOLOR 0x2164 +#define SRC1 0x2100 +#define SRC2 0x2104 +#define DST1 0x2108 +#define DST2 0x210C + +#define ROP_S 0xCC +#define ROP_P 0xF0 +#define ROP_X 0x66 |