diff options
Diffstat (limited to 'include')
198 files changed, 4027 insertions, 7626 deletions
diff --git a/include/asm-arm/arch-pnx4008/i2c.h b/include/asm-arm/arch-pnx4008/i2c.h new file mode 100644 index 00000000000..92e8d65006f --- /dev/null +++ b/include/asm-arm/arch-pnx4008/i2c.h @@ -0,0 +1,67 @@ +/* + * PNX4008-specific tweaks for I2C IP3204 block + * + * Author: Vitaly Wool <vwool@ru.mvista.com> + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __ASM_ARCH_I2C_H__ +#define __ASM_ARCH_I2C_H__ + +#include <linux/pm.h> +#include <linux/platform_device.h> + +enum { + mstatus_tdi = 0x00000001, + mstatus_afi = 0x00000002, + mstatus_nai = 0x00000004, + mstatus_drmi = 0x00000008, + mstatus_active = 0x00000020, + mstatus_scl = 0x00000040, + mstatus_sda = 0x00000080, + mstatus_rff = 0x00000100, + mstatus_rfe = 0x00000200, + mstatus_tff = 0x00000400, + mstatus_tfe = 0x00000800, +}; + +enum { + mcntrl_tdie = 0x00000001, + mcntrl_afie = 0x00000002, + mcntrl_naie = 0x00000004, + mcntrl_drmie = 0x00000008, + mcntrl_daie = 0x00000020, + mcntrl_rffie = 0x00000040, + mcntrl_tffie = 0x00000080, + mcntrl_reset = 0x00000100, + mcntrl_cdbmode = 0x00000400, +}; + +enum { + rw_bit = 1 << 0, + start_bit = 1 << 8, + stop_bit = 1 << 9, +}; + +#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */ +#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */ +#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */ +#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */ +#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */ +#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */ +#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */ +#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */ +#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */ +#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */ +#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */ +#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */ +#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */ + +#define HCLK_MHZ 13 +#define I2C_CHIP_NAME "PNX4008-I2C" + +#endif /* __ASM_ARCH_I2C_H___ */ diff --git a/include/asm-arm/arch-pxa/pxa2xx_spi.h b/include/asm-arm/arch-pxa/pxa2xx_spi.h index 915590c391c..acc7ec7a84a 100644 --- a/include/asm-arm/arch-pxa/pxa2xx_spi.h +++ b/include/asm-arm/arch-pxa/pxa2xx_spi.h @@ -27,16 +27,13 @@ #define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/2/(x+1))<<8)&0x0000ff00) #define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) #define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP_TIMEOUT_SCALE (2712) #elif defined(CONFIG_PXA27x) #define CLOCK_SPEED_HZ 13000000 #define SSP1_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) #define SSP2_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) #define SSP3_SerClkDiv(x) (((CLOCK_SPEED_HZ/(x+1))<<8)&0x000fff00) -#define SSP_TIMEOUT_SCALE (769) #endif -#define SSP_TIMEOUT(x) ((x*10000)/SSP_TIMEOUT_SCALE) #define SSP1_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(1))))) #define SSP2_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(2))))) #define SSP3_VIRT ((void *)(io_p2v(__PREG(SSCR0_P(3))))) @@ -63,7 +60,7 @@ struct pxa2xx_spi_chip { u8 tx_threshold; u8 rx_threshold; u8 dma_burst_size; - u32 timeout_microsecs; + u32 timeout; u8 enable_loopback; void (*cs_control)(u32 command); }; diff --git a/include/asm-arm/thread_info.h b/include/asm-arm/thread_info.h index d9b8bddc873..5014794f9eb 100644 --- a/include/asm-arm/thread_info.h +++ b/include/asm-arm/thread_info.h @@ -147,6 +147,7 @@ extern void iwmmxt_task_switch(struct thread_info *); #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 +#define TIF_FREEZE 19 #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) @@ -154,6 +155,7 @@ extern void iwmmxt_task_switch(struct thread_info *); #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) +#define _TIF_FREEZE (1 << TIF_FREEZE) /* * Change these and you break ASM code in entry-common.S diff --git a/include/asm-avr32/arch-at32ap/at32ap7000.h b/include/asm-avr32/arch-at32ap/at32ap7000.h new file mode 100644 index 00000000000..ba85e04553d --- /dev/null +++ b/include/asm-avr32/arch-at32ap/at32ap7000.h @@ -0,0 +1,33 @@ +/* + * Pin definitions for AT32AP7000. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_AT32AP7000_H__ +#define __ASM_ARCH_AT32AP7000_H__ + +#define GPIO_PERIPH_A 0 +#define GPIO_PERIPH_B 1 + +#define NR_GPIO_CONTROLLERS 4 + +/* + * Pin numbers identifying specific GPIO pins on the chip. They can + * also be converted to IRQ numbers by passing them through + * gpio_to_irq(). + */ +#define GPIO_PIOA_BASE (0) +#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) +#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) +#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) + +#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N)) +#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N)) +#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N)) +#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N)) + +#endif /* __ASM_ARCH_AT32AP7000_H__ */ diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index a39b3e999f1..b120ee030c8 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -21,10 +21,7 @@ void at32_map_usart(unsigned int hw_id, unsigned int line); struct platform_device *at32_add_device_usart(unsigned int id); struct eth_platform_data { - u8 valid; - u8 mii_phy_addr; u8 is_rmii; - u8 hw_addr[6]; }; struct platform_device * at32_add_device_eth(unsigned int id, struct eth_platform_data *data); diff --git a/include/asm-avr32/arch-at32ap/portmux.h b/include/asm-avr32/arch-at32ap/portmux.h index 4d50421262a..83c69057132 100644 --- a/include/asm-avr32/arch-at32ap/portmux.h +++ b/include/asm-avr32/arch-at32ap/portmux.h @@ -7,10 +7,20 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_AVR32_AT32_PORTMUX_H__ -#define __ASM_AVR32_AT32_PORTMUX_H__ +#ifndef __ASM_ARCH_PORTMUX_H__ +#define __ASM_ARCH_PORTMUX_H__ -void portmux_set_func(unsigned int portmux_id, unsigned int pin_id, - unsigned int function_id); +/* + * Set up pin multiplexing, called from board init only. + * + * The following flags determine the initial state of the pin. + */ +#define AT32_GPIOF_PULLUP 0x00000001 /* Enable pull-up */ +#define AT32_GPIOF_OUTPUT 0x00000002 /* Enable output driver */ +#define AT32_GPIOF_HIGH 0x00000004 /* Set output high */ + +void at32_select_periph(unsigned int pin, unsigned int periph, + unsigned long flags); +void at32_select_gpio(unsigned int pin, unsigned long flags); -#endif /* __ASM_AVR32_AT32_PORTMUX_H__ */ +#endif /* __ASM_ARCH_PORTMUX_H__ */ diff --git a/include/asm-avr32/dma-mapping.h b/include/asm-avr32/dma-mapping.h index 0580b5d62bb..5c01e27f0b4 100644 --- a/include/asm-avr32/dma-mapping.h +++ b/include/asm-avr32/dma-mapping.h @@ -109,7 +109,7 @@ static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size, enum dma_data_direction direction) { - dma_cache_sync(cpu_addr, size, direction); + dma_cache_sync(dev, cpu_addr, size, direction); return virt_to_bus(cpu_addr); } @@ -211,7 +211,7 @@ dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, sg[i].dma_address = page_to_bus(sg[i].page) + sg[i].offset; virt = page_address(sg[i].page) + sg[i].offset; - dma_cache_sync(virt, sg[i].length, direction); + dma_cache_sync(dev, virt, sg[i].length, direction); } return nents; @@ -256,14 +256,14 @@ static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - dma_cache_sync(bus_to_virt(dma_handle), size, direction); + dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction); } static inline void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { - dma_cache_sync(bus_to_virt(dma_handle), size, direction); + dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction); } /** @@ -286,7 +286,7 @@ dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int i; for (i = 0; i < nents; i++) { - dma_cache_sync(page_address(sg[i].page) + sg[i].offset, + dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset, sg[i].length, direction); } } @@ -298,7 +298,7 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int i; for (i = 0; i < nents; i++) { - dma_cache_sync(page_address(sg[i].page) + sg[i].offset, + dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset, sg[i].length, direction); } } diff --git a/include/asm-avr32/pgalloc.h b/include/asm-avr32/pgalloc.h index 7492cfb92ce..bb82e70cde8 100644 --- a/include/asm-avr32/pgalloc.h +++ b/include/asm-avr32/pgalloc.h @@ -28,7 +28,7 @@ static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd, static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm) { unsigned int pgd_size = (USER_PTRS_PER_PGD * sizeof(pgd_t)); - pgd_t *pgd = (pgd_t *)kmalloc(pgd_size, GFP_KERNEL); + pgd_t *pgd = kmalloc(pgd_size, GFP_KERNEL); if (pgd) memset(pgd, 0, pgd_size); diff --git a/include/asm-frv/thread_info.h b/include/asm-frv/thread_info.h index d66c48e6ef1..d881f518e6a 100644 --- a/include/asm-frv/thread_info.h +++ b/include/asm-frv/thread_info.h @@ -116,6 +116,7 @@ register struct thread_info *__current_thread_info asm("gr15"); #define TIF_RESTORE_SIGMASK 6 /* restore signal mask in do_signal() */ #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 17 /* OOM killer killed process */ +#define TIF_FREEZE 18 /* freezing for suspend */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) @@ -125,6 +126,7 @@ register struct thread_info *__current_thread_info asm("gr15"); #define _TIF_IRET (1 << TIF_IRET) #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) +#define _TIF_FREEZE (1 << TIF_FREEZE) #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ #define _TIF_ALLWORK_MASK 0x0000FFFF /* work to do on any return to u-space */ diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 6e9fcebbf89..7437ccaada7 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -242,6 +242,7 @@ *(.initcall4s.init) \ *(.initcall5.init) \ *(.initcall5s.init) \ + *(.initcallrootfs.init) \ *(.initcall6.init) \ *(.initcall6s.init) \ *(.initcall7.init) \ diff --git a/include/asm-i386/msr.h b/include/asm-i386/msr.h index 5679d499307..609a3899475 100644 --- a/include/asm-i386/msr.h +++ b/include/asm-i386/msr.h @@ -100,6 +100,8 @@ static inline void wrmsrl (unsigned long msr, unsigned long long val) #define MSR_P6_PERFCTR0 0xc1 #define MSR_P6_PERFCTR1 0xc2 +#define MSR_FSB_FREQ 0xcd + #define MSR_IA32_BBL_CR_CTL 0x119 @@ -130,6 +132,9 @@ static inline void wrmsrl (unsigned long msr, unsigned long long val) #define MSR_IA32_PERF_STATUS 0x198 #define MSR_IA32_PERF_CTL 0x199 +#define MSR_IA32_MPERF 0xE7 +#define MSR_IA32_APERF 0xE8 + #define MSR_IA32_THERM_CONTROL 0x19a #define MSR_IA32_THERM_INTERRUPT 0x19b #define MSR_IA32_THERM_STATUS 0x19c diff --git a/include/asm-i386/thread_info.h b/include/asm-i386/thread_info.h index 46d32ad9208..4b187bb377b 100644 --- a/include/asm-i386/thread_info.h +++ b/include/asm-i386/thread_info.h @@ -134,6 +134,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_MEMDIE 16 #define TIF_DEBUG 17 /* uses debug registers */ #define TIF_IO_BITMAP 18 /* uses I/O bitmap */ +#define TIF_FREEZE 19 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) @@ -147,6 +148,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_DEBUG (1<<TIF_DEBUG) #define _TIF_IO_BITMAP (1<<TIF_IO_BITMAP) +#define _TIF_FREEZE (1<<TIF_FREEZE) /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK \ diff --git a/include/asm-i386/topology.h b/include/asm-i386/topology.h index 978d0959613..ac58580ad66 100644 --- a/include/asm-i386/topology.h +++ b/include/asm-i386/topology.h @@ -89,6 +89,7 @@ static inline int node_to_first_cpu(int node) .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ | SD_BALANCE_FORK \ + | SD_SERIALIZE \ | SD_WAKE_BALANCE, \ .last_balance = jiffies, \ .balance_interval = 1, \ diff --git a/include/asm-ia64/break.h b/include/asm-ia64/break.h index 8167828edc4..f0340203989 100644 --- a/include/asm-ia64/break.h +++ b/include/asm-ia64/break.h @@ -12,8 +12,8 @@ * OS-specific debug break numbers: */ #define __IA64_BREAK_KDB 0x80100 -#define __IA64_BREAK_KPROBE 0x80200 -#define __IA64_BREAK_JPROBE 0x80300 +#define __IA64_BREAK_KPROBE 0x81000 /* .. 0x81fff */ +#define __IA64_BREAK_JPROBE 0x82000 /* * OS-specific break numbers: diff --git a/include/asm-ia64/kprobes.h b/include/asm-ia64/kprobes.h index 1b45b71c79b..828ae00e47c 100644 --- a/include/asm-ia64/kprobes.h +++ b/include/asm-ia64/kprobes.h @@ -115,6 +115,7 @@ struct arch_specific_insn { #define INST_FLAG_BREAK_INST 4 unsigned long inst_flag; unsigned short target_br_reg; + unsigned short slot; }; extern int kprobe_exceptions_notify(struct notifier_block *self, diff --git a/include/asm-ia64/sn/xpc.h b/include/asm-ia64/sn/xpc.h index 1d45e1518fb..e52b8508083 100644 --- a/include/asm-ia64/sn/xpc.h +++ b/include/asm-ia64/sn/xpc.h @@ -673,7 +673,7 @@ extern irqreturn_t xpc_notify_IRQ_handler(int, void *); extern void xpc_dropped_IPI_check(struct xpc_partition *); extern void xpc_activate_partition(struct xpc_partition *); extern void xpc_activate_kthreads(struct xpc_channel *, int); -extern void xpc_create_kthreads(struct xpc_channel *, int); +extern void xpc_create_kthreads(struct xpc_channel *, int, int); extern void xpc_disconnect_wait(int); diff --git a/include/asm-ia64/thread_info.h b/include/asm-ia64/thread_info.h index 8adcde0934c..9b505b25544 100644 --- a/include/asm-ia64/thread_info.h +++ b/include/asm-ia64/thread_info.h @@ -88,6 +88,7 @@ struct thread_info { #define TIF_MEMDIE 17 #define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */ #define TIF_DB_DISABLED 19 /* debug trap disabled for fsyscall */ +#define TIF_FREEZE 20 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) @@ -98,6 +99,7 @@ struct thread_info { #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_MCA_INIT (1 << TIF_MCA_INIT) #define _TIF_DB_DISABLED (1 << TIF_DB_DISABLED) +#define _TIF_FREEZE (1 << TIF_FREEZE) /* "work to do on user-return" bits */ #define TIF_ALLWORK_MASK (_TIF_NOTIFY_RESUME|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT) diff --git a/include/asm-ia64/topology.h b/include/asm-ia64/topology.h index a6e38565ab4..22ed6749557 100644 --- a/include/asm-ia64/topology.h +++ b/include/asm-ia64/topology.h @@ -101,6 +101,7 @@ void build_cpu_to_node_map(void); .flags = SD_LOAD_BALANCE \ | SD_BALANCE_EXEC \ | SD_BALANCE_FORK \ + | SD_SERIALIZE \ | SD_WAKE_BALANCE, \ .last_balance = jiffies, \ .balance_interval = 64, \ diff --git a/include/asm-m68k/swim_iop.h b/include/asm-m68k/swim_iop.h deleted file mode 100644 index f29b67876b0..00000000000 --- a/include/asm-m68k/swim_iop.h +++ /dev/null @@ -1,221 +0,0 @@ -/* - * SWIM access through the IOP - * Written by Joshua M. Thompson - */ - -/* IOP number and channel number for the SWIM */ - -#define SWIM_IOP IOP_NUM_ISM -#define SWIM_CHAN 1 - -/* Command code: */ - -#define CMD_INIT 0x01 /* Initialize */ -#define CMD_SHUTDOWN 0x02 /* Shutdown */ -#define CMD_START_POLL 0x03 /* Start insert/eject polling */ -#define CMD_STOP_POLL 0x04 /* Stop insert/eject polling */ -#define CMD_SETHFSTAG 0x05 /* Set HFS tag buffer address */ -#define CMD_STATUS 0x06 /* Status */ -#define CMD_EJECT 0x07 /* Eject */ -#define CMD_FORMAT 0x08 /* Format */ -#define CMD_FORMAT_VERIFY 0x09 /* Format and Verify */ -#define CMD_WRITE 0x0A /* Write */ -#define CMD_READ 0x0B /* Read */ -#define CMD_READ_VERIFY 0x0C /* Read and Verify */ -#define CMD_CACHE_CTRL 0x0D /* Cache control */ -#define CMD_TAGBUFF_CTRL 0x0E /* Tag buffer control */ -#define CMD_GET_ICON 0x0F /* Get Icon */ - -/* Drive types: */ - -/* note: apple sez DRV_FDHD is 4, but I get back a type */ -/* of 5 when I do a drive status check on my FDHD */ - -#define DRV_NONE 0 /* No drive */ -#define DRV_UNKNOWN 1 /* Unspecified drive */ -#define DRV_400K 2 /* 400K */ -#define DRV_800K 3 /* 400K/800K */ -#define DRV_FDHD 5 /* 400K/800K/720K/1440K */ -#define DRV_HD20 7 /* Apple HD20 */ - -/* Format types: */ - -#define FMT_HD20 0x0001 /* Apple HD20 */ -#define FMT_400K 0x0002 /* 400K (GCR) */ -#define FMT_800K 0x0004 /* 800K (GCR) */ -#define FMT_720K 0x0008 /* 720K (MFM) */ -#define FMT_1440K 0x0010 /* 1.44M (MFM) */ - -#define FMD_KIND_400K 1 -#define FMD_KIND_800K 2 -#define FMD_KIND_720K 3 -#define FMD_KIND_1440K 1 - -/* Icon Flags: */ - -#define ICON_MEDIA 0x01 /* Have IOP supply media icon */ -#define ICON_DRIVE 0x01 /* Have IOP supply drive icon */ - -/* Error codes: */ - -#define gcrOnMFMErr -400 /* GCR (400/800K) on HD media */ -#define verErr -84 /* verify failed */ -#define fmt2Err -83 /* can't get enough sync during format */ -#define fmt1Err -82 /* can't find sector 0 after track format */ -#define sectNFErr -81 /* can't find sector */ -#define seekErr -80 /* drive error during seek */ -#define spdAdjErr -79 /* can't set drive speed */ -#define twoSideErr -78 /* drive is single-sided */ -#define initIWMErr -77 /* error during initialization */ -#define tk0badErr -76 /* track zero is bad */ -#define cantStepErr -75 /* drive error during step */ -#define wrUnderrun -74 /* write underrun occurred */ -#define badDBtSlp -73 /* bad data bitslip marks */ -#define badDCksum -72 /* bad data checksum */ -#define noDtaMkErr -71 /* can't find data mark */ -#define badBtSlpErr -70 /* bad address bitslip marks */ -#define badCksmErr -69 /* bad address-mark checksum */ -#define dataVerErr -68 /* read-verify failed */ -#define noAdrMkErr -67 /* can't find an address mark */ -#define noNybErr -66 /* no nybbles? disk is probably degaussed */ -#define offLinErr -65 /* no disk in drive */ -#define noDriveErr -64 /* drive isn't connected */ -#define nsDrvErr -56 /* no such drive */ -#define paramErr -50 /* bad positioning information */ -#define wPrErr -44 /* write protected */ -#define openErr -23 /* already initialized */ - -#ifndef __ASSEMBLY__ - -struct swim_drvstatus { - __u16 curr_track; /* Current track number */ - __u8 write_prot; /* 0x80 if disk is write protected */ - __u8 disk_in_drive; /* 0x01 or 0x02 if a disk is in the drive */ - __u8 installed; /* 0x01 if drive installed, 0xFF if not */ - __u8 num_sides; /* 0x80 if two-sided format supported */ - __u8 two_sided; /* 0xff if two-sided format diskette */ - __u8 new_interface; /* 0x00 if old 400K drive, 0xFF if newer */ - __u16 errors; /* Disk error count */ - struct { /* 32 bits */ - __u16 reserved; - __u16 :4; - __u16 external:1; /* Drive is external */ - __u16 scsi:1; /* Drive is a SCSI drive */ - __u16 fixed:1; /* Drive has fixed media */ - __u16 secondary:1; /* Drive is secondary drive */ - __u8 type; /* Drive type */ - } info; - __u8 mfm_drive; /* 0xFF if this is an FDHD drive */ - __u8 mfm_disk; /* 0xFF if 720K/1440K (MFM) disk */ - __u8 mfm_format; /* 0x00 if 720K, 0xFF if 1440K */ - __u8 ctlr_type; /* 0x00 if IWM, 0xFF if SWIM */ - __u16 curr_format; /* Current format type */ - __u16 allowed_fmt; /* Allowed format types */ - __u32 num_blocks; /* Number of blocks on disk */ - __u8 icon_flags; /* Icon flags */ - __u8 unusued; -}; - -/* Commands issued from the host to the IOP: */ - -struct swimcmd_init { - __u8 code; /* CMD_INIT */ - __u8 unusued; - __u16 error; - __u8 drives[28]; /* drive type list */ -}; - -struct swimcmd_startpoll { - __u8 code; /* CMD_START_POLL */ - __u8 unusued; - __u16 error; -}; - -struct swimcmd_sethfstag { - __u8 code; /* CMD_SETHFSTAG */ - __u8 unusued; - __u16 error; - caddr_t tagbuf; /* HFS tag buffer address */ -}; - -struct swimcmd_status { - __u8 code; /* CMD_STATUS */ - __u8 drive_num; - __u16 error; - struct swim_drvstatus status; -}; - -struct swimcmd_eject { - __u8 code; /* CMD_EJECT */ - __u8 drive_num; - __u16 error; - struct swim_drvstatus status; -}; - -struct swimcmd_format { - __u8 code; /* CMD_FORMAT */ - __u8 drive_num; - __u16 error; - union { - struct { - __u16 fmt; /* format kind */ - __u8 hdrbyte; /* fmt byte for hdr (0=default) */ - __u8 interleave; /* interleave (0 = default) */ - caddr_t databuf; /* sector data buff (0=default */ - caddr_t tagbuf; /* tag data buffer (0=default) */ - } f; - struct swim_drvstatus status; - } p; -}; - -struct swimcmd_fmtverify { - __u8 code; /* CMD_FORMAT_VERIFY */ - __u8 drive_num; - __u16 error; -}; - -struct swimcmd_rw { - __u8 code; /* CMD_READ, CMD_WRITE or CMD_READ_VERIFY */ - __u8 drive_num; - __u16 error; - caddr_t buffer; /* R/W buffer address */ - __u32 first_block; /* Starting block */ - __u32 num_blocks; /* Number of blocks */ - __u8 tag[12]; /* tag data */ -}; - -struct swimcmd_cachectl { - __u8 code; /* CMD_CACHE_CTRL */ - __u8 unused; - __u16 error; - __u8 enable; /* Nonzero to enable cache */ - __u8 install; /* +1 = install, -1 = remove, 0 = neither */ -}; - -struct swimcmd_tagbufctl { - __u8 code; /* CMD_TAGBUFF_CTRL */ - __u8 unused; - __u16 error; - caddr_t buf; /* buffer address or 0 to disable */ -}; - -struct swimcmd_geticon { - __u8 code; /* CMD_GET_ICON */ - __u8 drive_num; - __u16 error; - caddr_t buffer; /* Nuffer address */ - __u16 kind; /* 0 = media icon, 1 = drive icon */ - __u16 unused; - __u16 max_bytes; /* maximum byte count */ -}; - -/* Messages from the SWIM IOP to the host CPU: */ - -struct swimmsg_status { - __u8 code; /* 1 = insert, 2 = eject, 3 = status changed */ - __u8 drive_num; - __u16 error; - struct swim_drvstatus status; -}; - -#endif /* __ASSEMBLY__ */ diff --git a/include/asm-mips/compat.h b/include/asm-mips/compat.h index 55a0152feb0..432653d7ae0 100644 --- a/include/asm-mips/compat.h +++ b/include/asm-mips/compat.h @@ -5,6 +5,7 @@ */ #include <linux/types.h> #include <asm/page.h> +#include <asm/ptrace.h> #define COMPAT_USER_HZ 100 diff --git a/include/asm-mips/mach-ip27/irq.h b/include/asm-mips/mach-ip27/irq.h index 806213ce31b..25f0c3f39ad 100644 --- a/include/asm-mips/mach-ip27/irq.h +++ b/include/asm-mips/mach-ip27/irq.h @@ -10,8 +10,6 @@ #ifndef __ASM_MACH_IP27_IRQ_H #define __ASM_MACH_IP27_IRQ_H -#include <asm/sn/arch.h> - /* * A hardwired interrupt number is completly stupid for this system - a * large configuration might have thousands if not tenthousands of diff --git a/include/asm-mips/mach-ip27/topology.h b/include/asm-mips/mach-ip27/topology.h index a13b715fd9c..44790fdc5d0 100644 --- a/include/asm-mips/mach-ip27/topology.h +++ b/include/asm-mips/mach-ip27/topology.h @@ -1,7 +1,6 @@ #ifndef _ASM_MACH_TOPOLOGY_H #define _ASM_MACH_TOPOLOGY_H 1 -#include <asm/sn/arch.h> #include <asm/sn/hub.h> #include <asm/mmzone.h> diff --git a/include/asm-mips/pci.h b/include/asm-mips/pci.h index c4d68bebdca..7f0f120ca07 100644 --- a/include/asm-mips/pci.h +++ b/include/asm-mips/pci.h @@ -187,4 +187,10 @@ static inline void pcibios_add_platform_entries(struct pci_dev *dev) /* Do platform specific device initialization at pci_enable_device() time */ extern int pcibios_plat_dev_init(struct pci_dev *dev); +/* Chances are this interrupt is wired PC-style ... */ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? 15 : 14; +} + #endif /* _ASM_PCI_H */ diff --git a/include/asm-mips/ptrace.h b/include/asm-mips/ptrace.h index 30bf555faea..8a1f2b6f04a 100644 --- a/include/asm-mips/ptrace.h +++ b/include/asm-mips/ptrace.h @@ -82,6 +82,14 @@ struct pt_regs { extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit); +extern NORET_TYPE void die(const char *, struct pt_regs *); + +static inline void die_if_kernel(const char *str, struct pt_regs *regs) +{ + if (unlikely(!user_mode(regs))) + die(str, regs); +} + #endif #endif /* _ASM_PTRACE_H */ diff --git a/include/asm-mips/sn/arch.h b/include/asm-mips/sn/arch.h index 51174af6ac5..da523de628b 100644 --- a/include/asm-mips/sn/arch.h +++ b/include/asm-mips/sn/arch.h @@ -18,7 +18,6 @@ #endif typedef u64 hubreg_t; -typedef u64 nic_t; #define cputonasid(cpu) (cpu_data[(cpu)].p_nasid) #define cputoslice(cpu) (cpu_data[(cpu)].p_slice) diff --git a/include/asm-mips/sn/klconfig.h b/include/asm-mips/sn/klconfig.h index 15d70ca5618..82aeb9e322d 100644 --- a/include/asm-mips/sn/klconfig.h +++ b/include/asm-mips/sn/klconfig.h @@ -61,6 +61,8 @@ #endif /* CONFIG_SGI_IP35 */ #endif /* CONFIG_SGI_IP27 || CONFIG_SGI_IP35 */ +typedef u64 nic_t; + #define KLCFGINFO_MAGIC 0xbeedbabe typedef s32 klconf_off_t; diff --git a/include/asm-mips/system.h b/include/asm-mips/system.h index 9428057a50c..5e1289c85ed 100644 --- a/include/asm-mips/system.h +++ b/include/asm-mips/system.h @@ -19,7 +19,6 @@ #include <asm/barrier.h> #include <asm/cpu-features.h> #include <asm/dsp.h> -#include <asm/ptrace.h> #include <asm/war.h> @@ -336,14 +335,6 @@ extern void *set_except_vector(int n, void *addr); extern unsigned long ebase; extern void per_cpu_trap_init(void); -extern NORET_TYPE void die(const char *, struct pt_regs *); - -static inline void die_if_kernel(const char *str, struct pt_regs *regs) -{ - if (unlikely(!user_mode(regs))) - die(str, regs); -} - extern int stop_a_enabled; /* diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild index 1e637381c11..703970fb0ec 100644 --- a/include/asm-powerpc/Kbuild +++ b/include/asm-powerpc/Kbuild @@ -17,7 +17,6 @@ header-y += ipc.h header-y += poll.h header-y += shmparam.h header-y += sockios.h -header-y += spu_info.h header-y += ucontext.h header-y += ioctl.h header-y += linkage.h @@ -37,6 +36,7 @@ unifdef-y += posix_types.h unifdef-y += ptrace.h unifdef-y += seccomp.h unifdef-y += signal.h +unifdef-y += spu_info.h unifdef-y += termios.h unifdef-y += types.h unifdef-y += unistd.h diff --git a/include/asm-powerpc/bitops.h b/include/asm-powerpc/bitops.h index 0288144ea02..8f757f6246e 100644 --- a/include/asm-powerpc/bitops.h +++ b/include/asm-powerpc/bitops.h @@ -209,7 +209,7 @@ int __ilog2_u32(u32 n) #ifdef __powerpc64__ static inline __attribute__((const)) -int __ilog2_u64(u32 n) +int __ilog2_u64(u64 n) { int bit; asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n)); diff --git a/include/asm-powerpc/bug.h b/include/asm-powerpc/bug.h index 978b2c7e84e..709568879f7 100644 --- a/include/asm-powerpc/bug.h +++ b/include/asm-powerpc/bug.h @@ -13,36 +13,39 @@ #ifndef __ASSEMBLY__ -struct bug_entry { - unsigned long bug_addr; - long line; - const char *file; - const char *function; -}; - -struct bug_entry *find_bug(unsigned long bugaddr); - -/* - * If this bit is set in the line number it means that the trap - * is for WARN_ON rather than BUG or BUG_ON. - */ -#define BUG_WARNING_TRAP 0x1000000 - #ifdef CONFIG_BUG +/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and + sizeof(struct bug_entry), respectively */ +#ifdef CONFIG_DEBUG_BUGVERBOSE +#define _EMIT_BUG_ENTRY \ + ".section __bug_table,\"a\"\n" \ + "2:\t" PPC_LONG "1b, %0\n" \ + "\t.short %1, %2\n" \ + ".org 2b+%3\n" \ + ".previous\n" +#else +#define _EMIT_BUG_ENTRY \ + ".section __bug_table,\"a\"\n" \ + "2:\t" PPC_LONG "1b\n" \ + "\t.short %2\n" \ + ".org 2b+%3\n" \ + ".previous\n" +#endif + /* * BUG_ON() and WARN_ON() do their best to cooperate with compile-time * optimisations. However depending on the complexity of the condition * some compiler versions may not produce optimal results. */ -#define BUG() do { \ - __asm__ __volatile__( \ - "1: twi 31,0,0\n" \ - ".section __bug_table,\"a\"\n" \ - "\t"PPC_LONG" 1b,%0,%1,%2\n" \ - ".previous" \ - : : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \ +#define BUG() do { \ + __asm__ __volatile__( \ + "1: twi 31,0,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (0), "i" (sizeof(struct bug_entry))); \ + for(;;) ; \ } while (0) #define BUG_ON(x) do { \ @@ -51,23 +54,21 @@ struct bug_entry *find_bug(unsigned long bugaddr); BUG(); \ } else { \ __asm__ __volatile__( \ - "1: "PPC_TLNEI" %0,0\n" \ - ".section __bug_table,\"a\"\n" \ - "\t"PPC_LONG" 1b,%1,%2,%3\n" \ - ".previous" \ - : : "r" ((long)(x)), "i" (__LINE__), \ - "i" (__FILE__), "i" (__FUNCTION__)); \ + "1: "PPC_TLNEI" %4,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), "i" (0), \ + "i" (sizeof(struct bug_entry)), \ + "r" ((long)(x))); \ } \ } while (0) #define __WARN() do { \ __asm__ __volatile__( \ "1: twi 31,0,0\n" \ - ".section __bug_table,\"a\"\n" \ - "\t"PPC_LONG" 1b,%0,%1,%2\n" \ - ".previous" \ - : : "i" (__LINE__ + BUG_WARNING_TRAP), \ - "i" (__FILE__), "i" (__FUNCTION__)); \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (BUGFLAG_WARNING), \ + "i" (sizeof(struct bug_entry))); \ } while (0) #define WARN_ON(x) ({ \ @@ -77,13 +78,12 @@ struct bug_entry *find_bug(unsigned long bugaddr); __WARN(); \ } else { \ __asm__ __volatile__( \ - "1: "PPC_TLNEI" %0,0\n" \ - ".section __bug_table,\"a\"\n" \ - "\t"PPC_LONG" 1b,%1,%2,%3\n" \ - ".previous" \ - : : "r" (__ret_warn_on), \ - "i" (__LINE__ + BUG_WARNING_TRAP), \ - "i" (__FILE__), "i" (__FUNCTION__)); \ + "1: "PPC_TLNEI" %4,0\n" \ + _EMIT_BUG_ENTRY \ + : : "i" (__FILE__), "i" (__LINE__), \ + "i" (BUGFLAG_WARNING), \ + "i" (sizeof(struct bug_entry)), \ + "r" (__ret_warn_on)); \ } \ unlikely(__ret_warn_on); \ }) diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 6fe5c9d4ca3..7384b8086b7 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -126,6 +126,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000) #define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000) #define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000) +#define CPU_FTR_FPU_UNAVAILABLE ASM_CONST(0x0000000000800000) /* * Add the 64-bit processor unique features in the top half of the word; @@ -152,6 +153,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTR_PURR LONG_ASM_CONST(0x0000400000000000) #define CPU_FTR_CELL_TB_BUG LONG_ASM_CONST(0x0000800000000000) #define CPU_FTR_SPURR LONG_ASM_CONST(0x0001000000000000) +#define CPU_FTR_DSCR LONG_ASM_CONST(0x0002000000000000) #ifndef __ASSEMBLY__ @@ -295,6 +297,9 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, #define CPU_FTRS_E300 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ CPU_FTR_COMMON) +#define CPU_FTRS_E300C2 (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \ + CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \ + CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE) #define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \ CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE) #define CPU_FTRS_8XX (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB) @@ -330,13 +335,14 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start, CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ - CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE) + CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ + CPU_FTR_DSCR) #define CPU_FTRS_POWER6X (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \ CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | \ - CPU_FTR_SPURR | CPU_FTR_REAL_LE) + CPU_FTR_SPURR | CPU_FTR_REAL_LE | CPU_FTR_DSCR) #define CPU_FTRS_CELL (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \ CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -364,7 +370,8 @@ enum { CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 | CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 | CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX | - CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_CLASSIC32 | + CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 | + CPU_FTRS_CLASSIC32 | #else CPU_FTRS_GENERIC_32 | #endif @@ -403,7 +410,8 @@ enum { CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 & CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 & CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX & - CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_CLASSIC32 & + CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 & + CPU_FTRS_CLASSIC32 & #else CPU_FTRS_GENERIC_32 & #endif diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h index fd4a5f5e33d..d7a1bc1551c 100644 --- a/include/asm-powerpc/dcr-native.h +++ b/include/asm-powerpc/dcr-native.h @@ -20,8 +20,7 @@ #ifndef _ASM_POWERPC_DCR_NATIVE_H #define _ASM_POWERPC_DCR_NATIVE_H #ifdef __KERNEL__ - -#include <asm/reg.h> +#ifndef __ASSEMBLY__ typedef struct {} dcr_host_t; @@ -32,7 +31,41 @@ typedef struct {} dcr_host_t; #define dcr_read(host, dcr_n) mfdcr(dcr_n) #define dcr_write(host, dcr_n, value) mtdcr(dcr_n, value) +/* Device Control Registers */ +void __mtdcr(int reg, unsigned int val); +unsigned int __mfdcr(int reg); +#define mfdcr(rn) \ + ({unsigned int rval; \ + if (__builtin_constant_p(rn)) \ + asm volatile("mfdcr %0," __stringify(rn) \ + : "=r" (rval)); \ + else \ + rval = __mfdcr(rn); \ + rval;}) + +#define mtdcr(rn, v) \ +do { \ + if (__builtin_constant_p(rn)) \ + asm volatile("mtdcr " __stringify(rn) ",%0" \ + : : "r" (v)); \ + else \ + __mtdcr(rn, v); \ +} while (0) + +/* R/W of indirect DCRs make use of standard naming conventions for DCRs */ +#define mfdcri(base, reg) \ +({ \ + mtdcr(base ## _CFGADDR, base ## _ ## reg); \ + mfdcr(base ## _CFGDATA); \ +}) + +#define mtdcri(base, reg, data) \ +do { \ + mtdcr(base ## _CFGADDR, base ## _ ## reg); \ + mtdcr(base ## _CFGDATA, data); \ +} while (0) +#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_DCR_NATIVE_H */ diff --git a/include/asm-powerpc/dcr.h b/include/asm-powerpc/dcr.h index 473f2c7fd89..b66c5e6941f 100644 --- a/include/asm-powerpc/dcr.h +++ b/include/asm-powerpc/dcr.h @@ -20,6 +20,7 @@ #ifndef _ASM_POWERPC_DCR_H #define _ASM_POWERPC_DCR_H #ifdef __KERNEL__ +#ifdef CONFIG_PPC_DCR #ifdef CONFIG_PPC_DCR_NATIVE #include <asm/dcr-native.h> @@ -38,5 +39,6 @@ extern unsigned int dcr_resource_len(struct device_node *np, unsigned int index); #endif /* CONFIG_PPC_MERGE */ +#endif /* CONFIG_PPC_DCR */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_DCR_H */ diff --git a/include/asm-powerpc/hw_irq.h b/include/asm-powerpc/hw_irq.h index d604863d72f..9e4dd98eb22 100644 --- a/include/asm-powerpc/hw_irq.h +++ b/include/asm-powerpc/hw_irq.h @@ -107,25 +107,6 @@ static inline void local_irq_save_ptr(unsigned long *flags) #endif /* CONFIG_PPC64 */ -#define mask_irq(irq) \ - ({ \ - irq_desc_t *desc = get_irq_desc(irq); \ - if (desc->chip && desc->chip->disable) \ - desc->chip->disable(irq); \ - }) -#define unmask_irq(irq) \ - ({ \ - irq_desc_t *desc = get_irq_desc(irq); \ - if (desc->chip && desc->chip->enable) \ - desc->chip->enable(irq); \ - }) -#define ack_irq(irq) \ - ({ \ - irq_desc_t *desc = get_irq_desc(irq); \ - if (desc->chip && desc->chip->ack) \ - desc->chip->ack(irq); \ - }) - /* * interrupt-retrigger: should we handle this via lost interrupts and IPIs * or should we not care like we do now ? --BenH. diff --git a/include/asm-powerpc/module.h b/include/asm-powerpc/module.h index 584fabfb4f0..e5f14b13ccf 100644 --- a/include/asm-powerpc/module.h +++ b/include/asm-powerpc/module.h @@ -46,8 +46,6 @@ struct mod_arch_specific { unsigned int num_bugs; }; -extern struct bug_entry *module_find_bug(unsigned long bugaddr); - /* * Select ELF headers. * Make empty section for module_frob_arch_sections to expand. diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h index 7bb7f900980..cb02c9d1ef9 100644 --- a/include/asm-powerpc/pci-bridge.h +++ b/include/asm-powerpc/pci-bridge.h @@ -31,12 +31,12 @@ struct pci_controller { int last_busno; void __iomem *io_base_virt; - unsigned long io_base_phys; + resource_size_t io_base_phys; /* Some machines have a non 1:1 mapping of * the PCI memory space in the CPU bus space */ - unsigned long pci_mem_offset; + resource_size_t pci_mem_offset; unsigned long pci_io_size; struct pci_ops *ops; diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h index 16f13319c76..ac656ee6bb1 100644 --- a/include/asm-powerpc/pci.h +++ b/include/asm-powerpc/pci.h @@ -143,8 +143,13 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, /* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */ #define HAVE_PCI_MMAP 1 -#ifdef CONFIG_PPC64 -/* pci_unmap_{single,page} is not a nop, thus... */ +#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE) +/* + * For 64-bit kernels, pci_unmap_{single,page} is not a nop. + * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and + * so on are not nops. + * and thus... + */ #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ dma_addr_t ADDR_NAME; #define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ @@ -158,6 +163,20 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, #define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ (((PTR)->LEN_NAME) = (VAL)) +#else /* 32-bit && coherent */ + +/* pci_unmap_{page,single} is a nop so... */ +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) + +#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */ + +#ifdef CONFIG_PPC64 + /* The PCI address space does not equal the physical memory address * space (we have an IOMMU). The IDE and SCSI device layers use * this boolean for bounce buffer decisions. @@ -172,16 +191,8 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma, */ #define PCI_DMA_BUS_IS_PHYS (1) -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - #endif /* CONFIG_PPC64 */ - + extern void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res); diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h index 6faae7b14d5..a3631b15754 100644 --- a/include/asm-powerpc/reg.h +++ b/include/asm-powerpc/reg.h @@ -143,6 +143,7 @@ /* Special Purpose Registers (SPRNs)*/ #define SPRN_CTR 0x009 /* Count Register */ +#define SPRN_DSCR 0x11 #define SPRN_CTRLF 0x088 #define SPRN_CTRLT 0x098 #define CTRL_CT 0xc0000000 /* current thread */ @@ -163,6 +164,7 @@ #define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */ #define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */ #define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */ +#define SPRN_SPURR 0x134 /* Scaled PURR */ #define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */ #define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */ #define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */ diff --git a/include/asm-powerpc/rtas.h b/include/asm-powerpc/rtas.h index 5a0c136c041..8eaa7b28d9d 100644 --- a/include/asm-powerpc/rtas.h +++ b/include/asm-powerpc/rtas.h @@ -159,6 +159,7 @@ extern struct rtas_t rtas; extern void enter_rtas(unsigned long); extern int rtas_token(const char *service); +extern int rtas_service_present(const char *service); extern int rtas_call(int token, int, int, int *, ...); extern void rtas_restart(char *cmd); extern void rtas_power_off(void); @@ -221,8 +222,6 @@ extern int rtas_get_error_log_max(void); extern spinlock_t rtas_data_buf_lock; extern char rtas_data_buf[RTAS_DATA_BUF_SIZE]; -extern void rtas_stop_self(void); - /* RMO buffer reserved for user-space RTAS use */ extern unsigned long rtas_rmo_buf; diff --git a/include/asm-powerpc/thread_info.h b/include/asm-powerpc/thread_info.h index d339e2e88b1..3f32ca8bfec 100644 --- a/include/asm-powerpc/thread_info.h +++ b/include/asm-powerpc/thread_info.h @@ -122,6 +122,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_RESTOREALL 12 /* Restore all regs (implies NOERROR) */ #define TIF_NOERROR 14 /* Force successful syscall return */ #define TIF_RESTORE_SIGMASK 15 /* Restore signal mask in do_signal */ +#define TIF_FREEZE 16 /* Freezing for suspend */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) @@ -138,6 +139,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_RESTOREALL (1<<TIF_RESTOREALL) #define _TIF_NOERROR (1<<TIF_NOERROR) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) +#define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP) #define _TIF_USER_WORK_MASK (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | \ diff --git a/include/asm-powerpc/topology.h b/include/asm-powerpc/topology.h index 50c014007de..6610495f5f1 100644 --- a/include/asm-powerpc/topology.h +++ b/include/asm-powerpc/topology.h @@ -66,6 +66,7 @@ static inline int pcibus_to_node(struct pci_bus *bus) | SD_BALANCE_EXEC \ | SD_BALANCE_NEWIDLE \ | SD_WAKE_IDLE \ + | SD_SERIALIZE \ | SD_WAKE_BALANCE, \ .last_balance = jiffies, \ .balance_interval = 1, \ diff --git a/include/asm-ppc/pci-bridge.h b/include/asm-ppc/pci-bridge.h index 6c955d0c1ef..4d35b844bc5 100644 --- a/include/asm-ppc/pci-bridge.h +++ b/include/asm-ppc/pci-bridge.h @@ -20,8 +20,8 @@ extern unsigned long pci_bus_mem_base_phys(unsigned int bus); extern struct pci_controller* pcibios_alloc_controller(void); /* Helper function for setting up resources */ -extern void pci_init_resource(struct resource *res, unsigned long start, - unsigned long end, int flags, char *name); +extern void pci_init_resource(struct resource *res, resource_size_t start, + resource_size_t end, int flags, char *name); /* Get the PCI host controller for a bus */ extern struct pci_controller* pci_bus_to_hose(int bus); @@ -50,12 +50,12 @@ struct pci_controller { int bus_offset; void __iomem *io_base_virt; - unsigned long io_base_phys; + resource_size_t io_base_phys; /* Some machines (PReP) have a non 1:1 mapping of * the PCI memory space in the CPU bus space */ - unsigned long pci_mem_offset; + resource_size_t pci_mem_offset; struct pci_ops *ops; volatile unsigned int __iomem *cfg_addr; diff --git a/include/asm-ppc/pci.h b/include/asm-ppc/pci.h index 11ffaaa5da1..9d162028dab 100644 --- a/include/asm-ppc/pci.h +++ b/include/asm-ppc/pci.h @@ -61,6 +61,27 @@ extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr); */ #define PCI_DMA_BUS_IS_PHYS (1) +#ifdef CONFIG_NOT_COHERENT_CACHE +/* + * pci_unmap_{page,single} are NOPs but pci_dma_sync_single_for_cpu() + * and so on are not, so... + */ + +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) + +#else /* coherent */ + /* pci_unmap_{page,single} is a nop so... */ #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) #define DECLARE_PCI_UNMAP_LEN(LEN_NAME) @@ -69,6 +90,8 @@ extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr); #define pci_unmap_len(PTR, LEN_NAME) (0) #define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) +#endif /* CONFIG_NOT_COHERENT_CACHE */ + #ifdef CONFIG_PCI static inline void pci_dma_burst_advice(struct pci_dev *pdev, enum pci_dma_burst_strategy *strat, diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h index 602fbadeaf4..a263fc1e65c 100644 --- a/include/asm-ppc/reg_booke.h +++ b/include/asm-ppc/reg_booke.h @@ -9,41 +9,9 @@ #ifndef __ASM_PPC_REG_BOOKE_H__ #define __ASM_PPC_REG_BOOKE_H__ -#ifndef __ASSEMBLY__ -/* Device Control Registers */ -void __mtdcr(int reg, unsigned int val); -unsigned int __mfdcr(int reg); -#define mfdcr(rn) \ - ({unsigned int rval; \ - if (__builtin_constant_p(rn)) \ - asm volatile("mfdcr %0," __stringify(rn) \ - : "=r" (rval)); \ - else \ - rval = __mfdcr(rn); \ - rval;}) - -#define mtdcr(rn, v) \ -do { \ - if (__builtin_constant_p(rn)) \ - asm volatile("mtdcr " __stringify(rn) ",%0" \ - : : "r" (v)); \ - else \ - __mtdcr(rn, v); \ -} while (0) - -/* R/W of indirect DCRs make use of standard naming conventions for DCRs */ -#define mfdcri(base, reg) \ -({ \ - mtdcr(base ## _CFGADDR, base ## _ ## reg); \ - mfdcr(base ## _CFGDATA); \ -}) - -#define mtdcri(base, reg, data) \ -do { \ - mtdcr(base ## _CFGADDR, base ## _ ## reg); \ - mtdcr(base ## _CFGDATA, data); \ -} while (0) +#include <asm/dcr.h> +#ifndef __ASSEMBLY__ /* Performance Monitor Registers */ #define mfpmr(rn) ({unsigned int rval; \ asm volatile("mfpmr %0," __stringify(rn) \ diff --git a/include/asm-sh/atomic-irq.h b/include/asm-sh/atomic-irq.h new file mode 100644 index 00000000000..74f7943cff6 --- /dev/null +++ b/include/asm-sh/atomic-irq.h @@ -0,0 +1,71 @@ +#ifndef __ASM_SH_ATOMIC_IRQ_H +#define __ASM_SH_ATOMIC_IRQ_H + +/* + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + */ +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v += i; + local_irq_restore(flags); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v -= i; + local_irq_restore(flags); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp += i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp -= i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v &= ~mask; + local_irq_restore(flags); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v |= mask; + local_irq_restore(flags); +} + +#endif /* __ASM_SH_ATOMIC_IRQ_H */ diff --git a/include/asm-sh/atomic-llsc.h b/include/asm-sh/atomic-llsc.h new file mode 100644 index 00000000000..4b00b78e3f4 --- /dev/null +++ b/include/asm-sh/atomic-llsc.h @@ -0,0 +1,107 @@ +#ifndef __ASM_SH_ATOMIC_LLSC_H +#define __ASM_SH_ATOMIC_LLSC_H + +/* + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + */ +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_add \n" +" add %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (i), "r" (&v->counter) + : "t"); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_sub \n" +" sub %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (i), "r" (&v->counter) + : "t"); +} + +/* + * SH-4A note: + * + * We basically get atomic_xxx_return() for free compared with + * atomic_xxx(). movli.l/movco.l require r0 due to the instruction + * encoding, so the retval is automatically set without having to + * do any special work. + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long temp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_add_return \n" +" add %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp) + : "r" (i), "r" (&v->counter) + : "t"); + + return temp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long temp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_sub_return \n" +" sub %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp) + : "r" (i), "r" (&v->counter) + : "t"); + + return temp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_clear_mask \n" +" and %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (~mask), "r" (&v->counter) + : "t"); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_set_mask \n" +" or %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (mask), "r" (&v->counter) + : "t"); +} + +#endif /* __ASM_SH_ATOMIC_LLSC_H */ diff --git a/include/asm-sh/atomic.h b/include/asm-sh/atomic.h index 28305c3cbdd..e12570b9339 100644 --- a/include/asm-sh/atomic.h +++ b/include/asm-sh/atomic.h @@ -17,119 +17,14 @@ typedef struct { volatile int counter; } atomic_t; #include <linux/compiler.h> #include <asm/system.h> -/* - * To get proper branch prediction for the main line, we must branch - * forward to code at the end of this object's .text section, then - * branch back to restart the operation. - */ -static inline void atomic_add(int i, atomic_t *v) -{ #ifdef CONFIG_CPU_SH4A - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_add \n" -" add %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (i), "r" (&v->counter) - : "t"); +#include <asm/atomic-llsc.h> #else - unsigned long flags; - - local_irq_save(flags); - *(long *)v += i; - local_irq_restore(flags); -#endif -} - -static inline void atomic_sub(int i, atomic_t *v) -{ -#ifdef CONFIG_CPU_SH4A - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_sub \n" -" sub %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (i), "r" (&v->counter) - : "t"); -#else - unsigned long flags; - - local_irq_save(flags); - *(long *)v -= i; - local_irq_restore(flags); +#include <asm/atomic-irq.h> #endif -} - -/* - * SH-4A note: - * - * We basically get atomic_xxx_return() for free compared with - * atomic_xxx(). movli.l/movco.l require r0 due to the instruction - * encoding, so the retval is automatically set without having to - * do any special work. - */ -static inline int atomic_add_return(int i, atomic_t *v) -{ - unsigned long temp; - -#ifdef CONFIG_CPU_SH4A - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_add_return \n" -" add %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" -" synco \n" - : "=&z" (temp) - : "r" (i), "r" (&v->counter) - : "t"); -#else - unsigned long flags; - - local_irq_save(flags); - temp = *(long *)v; - temp += i; - *(long *)v = temp; - local_irq_restore(flags); -#endif - - return temp; -} #define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) -static inline int atomic_sub_return(int i, atomic_t *v) -{ - unsigned long temp; - -#ifdef CONFIG_CPU_SH4A - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_sub_return \n" -" sub %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" -" synco \n" - : "=&z" (temp) - : "r" (i), "r" (&v->counter) - : "t"); -#else - unsigned long flags; - - local_irq_save(flags); - temp = *(long *)v; - temp -= i; - *(long *)v = temp; - local_irq_restore(flags); -#endif - - return temp; -} - #define atomic_dec_return(v) atomic_sub_return(1,(v)) #define atomic_inc_return(v) atomic_add_return(1,(v)) @@ -180,50 +75,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) } #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) -static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) -{ -#ifdef CONFIG_CPU_SH4A - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_clear_mask \n" -" and %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (~mask), "r" (&v->counter) - : "t"); -#else - unsigned long flags; - - local_irq_save(flags); - *(long *)v &= ~mask; - local_irq_restore(flags); -#endif -} - -static inline void atomic_set_mask(unsigned int mask, atomic_t *v) -{ -#ifdef CONFIG_CPU_SH4A - unsigned long tmp; - - __asm__ __volatile__ ( -"1: movli.l @%2, %0 ! atomic_set_mask \n" -" or %1, %0 \n" -" movco.l %0, @%2 \n" -" bf 1b \n" - : "=&z" (tmp) - : "r" (mask), "r" (&v->counter) - : "t"); -#else - unsigned long flags; - - local_irq_save(flags); - *(long *)v |= mask; - local_irq_restore(flags); -#endif -} - /* Atomic operations are already serializing on SH */ #define smp_mb__before_atomic_dec() barrier() #define smp_mb__after_atomic_dec() barrier() diff --git a/include/asm-sh/bug.h b/include/asm-sh/bug.h index 1b4fc52a59e..2f89dd06d0c 100644 --- a/include/asm-sh/bug.h +++ b/include/asm-sh/bug.h @@ -1,19 +1,54 @@ #ifndef __ASM_SH_BUG_H #define __ASM_SH_BUG_H - #ifdef CONFIG_BUG -/* - * Tell the user there is some problem. - */ -#define BUG() do { \ - printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \ - *(volatile int *)0 = 0; \ + +struct bug_frame { + unsigned short opcode; + unsigned short line; + const char *file; + const char *func; +}; + +struct pt_regs; + +extern void handle_BUG(struct pt_regs *); + +#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */ + +#ifdef CONFIG_DEBUG_BUGVERBOSE + +#define BUG() \ +do { \ + __asm__ __volatile__ ( \ + ".align 2\n\t" \ + ".short %O0\n\t" \ + ".short %O1\n\t" \ + ".long %O2\n\t" \ + ".long %O3\n\t" \ + : \ + : "n" (TRAPA_BUG_OPCODE), \ + "i" (__LINE__), "X" (__FILE__), \ + "X" (__FUNCTION__)); \ +} while (0) + +#else + +#define BUG() \ +do { \ + __asm__ __volatile__ ( \ + ".align 2\n\t" \ + ".short %O0\n\t" \ + : \ + : "n" (TRAPA_BUG_OPCODE)); \ } while (0) +#endif /* CONFIG_DEBUG_BUGVERBOSE */ + #define HAVE_ARCH_BUG -#endif + +#endif /* CONFIG_BUG */ #include <asm-generic/bug.h> -#endif +#endif /* __ASM_SH_BUG_H */ diff --git a/include/asm-sh/bugs.h b/include/asm-sh/bugs.h index 795047da5e1..a294997a841 100644 --- a/include/asm-sh/bugs.h +++ b/include/asm-sh/bugs.h @@ -16,9 +16,8 @@ static void __init check_bugs(void) { - extern char *get_cpu_subtype(void); extern unsigned long loops_per_jiffy; - char *p= &init_utsname()->machine[2]; /* "sh" */ + char *p = &init_utsname()->machine[2]; /* "sh" */ cpu_data->loops_per_jiffy = loops_per_jiffy; @@ -40,6 +39,15 @@ static void __init check_bugs(void) *p++ = '4'; *p++ = 'a'; break; + case CPU_SH73180 ... CPU_SH7722: + *p++ = '4'; + *p++ = 'a'; + *p++ = 'l'; + *p++ = '-'; + *p++ = 'd'; + *p++ = 's'; + *p++ = 'p'; + break; default: *p++ = '?'; *p++ = '!'; diff --git a/include/asm-sh/checksum.h b/include/asm-sh/checksum.h index d44344c88e7..4bc8357e889 100644 --- a/include/asm-sh/checksum.h +++ b/include/asm-sh/checksum.h @@ -34,25 +34,26 @@ asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); */ asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, - int len, __wsum sum, int *src_err_ptr, int *dst_err_ptr); + int len, __wsum sum, + int *src_err_ptr, int *dst_err_ptr); /* * Note: when you get a NULL pointer exception here this means someone - * passed in an incorrect kernel address to one of these functions. - * - * If you use these functions directly please don't forget the + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the * access_ok(). */ -static __inline__ +static inline __wsum csum_partial_copy_nocheck(const void *src, void *dst, - int len, __wsum sum) + int len, __wsum sum) { - return csum_partial_copy_generic ( src, dst, len, sum, NULL, NULL); + return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); } -static __inline__ +static inline __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *err_ptr) + int len, __wsum sum, int *err_ptr) { return csum_partial_copy_generic((__force const void *)src, dst, len, sum, err_ptr, NULL); @@ -62,7 +63,7 @@ __wsum csum_partial_copy_from_user(const void __user *src, void *dst, * Fold a partial checksum */ -static __inline__ __sum16 csum_fold(__wsum sum) +static inline __sum16 csum_fold(__wsum sum) { unsigned int __dummy; __asm__("swap.w %0, %1\n\t" @@ -85,7 +86,7 @@ static __inline__ __sum16 csum_fold(__wsum sum) * i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted * for linux by * Arnt Gulbrandsen. */ -static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) { unsigned int sum, __dummy0, __dummy1; @@ -113,10 +114,10 @@ static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) return csum_fold(sum); } -static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) { #ifdef __LITTLE_ENDIAN__ unsigned long len_proto = (proto + len) << 8; @@ -132,6 +133,7 @@ static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, : "=r" (sum), "=r" (len_proto) : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum) : "t"); + return sum; } @@ -139,30 +141,28 @@ static __inline__ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, * computes the checksum of the TCP/UDP pseudo-header * returns a 16-bit checksum, already complemented */ -static __inline__ __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) { - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); } /* * this routine is used for miscellaneous IP-like checksums, mainly * in icmp.c */ - -static __inline__ __sum16 ip_compute_csum(const void *buff, int len) +static inline __sum16 ip_compute_csum(const void *buff, int len) { - return csum_fold (csum_partial(buff, len, 0)); + return csum_fold(csum_partial(buff, len, 0)); } #define _HAVE_ARCH_IPV6_CSUM -#ifdef CONFIG_IPV6 -static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, - __u32 len, unsigned short proto, - __wsum sum) +static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) { unsigned int __dummy; __asm__("clrt\n\t" @@ -187,22 +187,21 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr, "movt %1\n\t" "add %1, %0\n" : "=r" (sum), "=&r" (__dummy) - : "r" (saddr), "r" (daddr), + : "r" (saddr), "r" (daddr), "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) : "t"); return csum_fold(sum); } -#endif -/* +/* * Copy and checksum to user */ #define HAVE_CSUM_COPY_USER -static __inline__ __wsum csum_and_copy_to_user (const void *src, - void __user *dst, - int len, __wsum sum, - int *err_ptr) +static inline __wsum csum_and_copy_to_user(const void *src, + void __user *dst, + int len, __wsum sum, + int *err_ptr) { if (access_ok(VERIFY_WRITE, dst, len)) return csum_partial_copy_generic((__force const void *)src, diff --git a/include/asm-sh/cpu-sh4/cache.h b/include/asm-sh/cpu-sh4/cache.h index 6e9c7e6ee8e..f92b20a0983 100644 --- a/include/asm-sh/cpu-sh4/cache.h +++ b/include/asm-sh/cpu-sh4/cache.h @@ -22,7 +22,7 @@ #define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */ #define CCR_CACHE_ICI 0x0800 /* IC Invalidate */ #define CCR_CACHE_IIX 0x8000 /* IC Index Enable */ -#ifndef CONFIG_CPU_SUBTYPE_SH7780 +#ifndef CONFIG_CPU_SH4A #define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */ #endif diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h index ef2b9b1ae41..602d061ca2d 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/include/asm-sh/cpu-sh4/freq.h @@ -10,7 +10,7 @@ #ifndef __ASM_CPU_SH4_FREQ_H #define __ASM_CPU_SH4_FREQ_H -#if defined(CONFIG_CPU_SUBTYPE_SH73180) +#if defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7722) #define FRQCR 0xa4150000 #elif defined(CONFIG_CPU_SUBTYPE_SH7780) #define FRQCR 0xffc80000 diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h index 37ab0c131a4..8d0867b98e0 100644 --- a/include/asm-sh/dma-mapping.h +++ b/include/asm-sh/dma-mapping.h @@ -67,7 +67,7 @@ static inline dma_addr_t dma_map_single(struct device *dev, if (dev->bus == &pci_bus_type) return virt_to_bus(ptr); #endif - dma_cache_sync(ptr, size, dir); + dma_cache_sync(dev, ptr, size, dir); return virt_to_bus(ptr); } @@ -81,7 +81,7 @@ static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, for (i = 0; i < nents; i++) { #if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(page_address(sg[i].page) + sg[i].offset, + dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset, sg[i].length, dir); #endif sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset; @@ -112,7 +112,7 @@ static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle, if (dev->bus == &pci_bus_type) return; #endif - dma_cache_sync(bus_to_virt(dma_handle), size, dir); + dma_cache_sync(dev, bus_to_virt(dma_handle), size, dir); } static inline void dma_sync_single_range(struct device *dev, @@ -124,7 +124,7 @@ static inline void dma_sync_single_range(struct device *dev, if (dev->bus == &pci_bus_type) return; #endif - dma_cache_sync(bus_to_virt(dma_handle) + offset, size, dir); + dma_cache_sync(dev, bus_to_virt(dma_handle) + offset, size, dir); } static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, @@ -134,7 +134,7 @@ static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, for (i = 0; i < nelems; i++) { #if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) - dma_cache_sync(page_address(sg[i].page) + sg[i].offset, + dma_cache_sync(dev, page_address(sg[i].page) + sg[i].offset, sg[i].length, dir); #endif sg[i].dma_address = page_to_phys(sg[i].page) + sg[i].offset; diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h index fd576088e47..bff965ef4b9 100644 --- a/include/asm-sh/irq.h +++ b/include/asm-sh/irq.h @@ -37,7 +37,8 @@ # define ONCHIP_NR_IRQS 144 #elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \ defined(CONFIG_CPU_SUBTYPE_SH73180) || \ - defined(CONFIG_CPU_SUBTYPE_SH7343) + defined(CONFIG_CPU_SUBTYPE_SH7343) || \ + defined(CONFIG_CPU_SUBTYPE_SH7722) # define ONCHIP_NR_IRQS 109 #elif defined(CONFIG_CPU_SUBTYPE_SH7780) # define ONCHIP_NR_IRQS 111 @@ -79,6 +80,8 @@ # define OFFCHIP_NR_IRQS 16 #elif defined(CONFIG_SH_7343_SOLUTION_ENGINE) # define OFFCHIP_NR_IRQS 12 +#elif defined(CONFIG_SH_7722_SOLUTION_ENGINE) +# define OFFCHIP_NR_IRQS 14 #elif defined(CONFIG_SH_UNKNOWN) # define OFFCHIP_NR_IRQS 16 /* Must also be last */ #else diff --git a/include/asm-sh/pgtable.h b/include/asm-sh/pgtable.h index c84901dbd8e..036ca284386 100644 --- a/include/asm-sh/pgtable.h +++ b/include/asm-sh/pgtable.h @@ -508,16 +508,50 @@ struct vm_area_struct; extern void update_mmu_cache(struct vm_area_struct * vma, unsigned long address, pte_t pte); -/* Encode and de-code a swap entry */ /* + * Encode and de-code a swap entry + * + * Constraints: + * _PAGE_FILE at bit 0 + * _PAGE_PRESENT at bit 8 + * _PAGE_PROTNONE at bit 9 + * + * For the normal case, we encode the swap type into bits 0:7 and the + * swap offset into bits 10:30. For the 64-bit PTE case, we keep the + * preserved bits in the low 32-bits and use the upper 32 as the swap + * offset (along with a 5-bit type), following the same approach as x86 + * PAE. This keeps the logic quite simple, and allows for a full 32 + * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with + * in the pte_low case. + * + * As is evident by the Alpha code, if we ever get a 64-bit unsigned + * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes + * much cleaner.. + * * NOTE: We should set ZEROs at the position of _PAGE_PRESENT * and _PAGE_PROTNONE bits */ -#define __swp_type(x) ((x).val & 0xff) -#define __swp_offset(x) ((x).val >> 10) -#define __swp_entry(type, offset) ((swp_entry_t) { (type) | ((offset) << 10) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) +#ifdef CONFIG_X2TLB +#define __swp_type(x) ((x).val & 0x1f) +#define __swp_offset(x) ((x).val >> 5) +#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5}) +#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high }) +#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val }) + +/* + * Encode and decode a nonlinear file mapping entry + */ +#define pte_to_pgoff(pte) ((pte).pte_high) +#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) }) + +#define PTE_FILE_MAX_BITS 32 +#else +#define __swp_type(x) ((x).val & 0xff) +#define __swp_offset(x) ((x).val >> 10) +#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10}) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) /* * Encode and decode a nonlinear file mapping entry @@ -525,6 +559,7 @@ extern void update_mmu_cache(struct vm_area_struct * vma, #define PTE_FILE_MAX_BITS 29 #define pte_to_pgoff(pte) (pte_val(pte) >> 1) #define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE }) +#endif typedef pte_t *pte_addr_t; diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index 6f1dd7ca1b1..e29f2abb92d 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -27,6 +27,8 @@ #define CCN_CVR 0xff000040 #define CCN_PRR 0xff000044 +const char *get_cpu_subtype(void); + /* * CPU type and hardware bug flags. Kept separately for each CPU. * @@ -52,8 +54,10 @@ enum cpu_type { CPU_SH7760, CPU_ST40RA, CPU_ST40GX1, CPU_SH4_202, CPU_SH4_501, /* SH-4A types */ - CPU_SH73180, CPU_SH7343, CPU_SH7770, CPU_SH7780, CPU_SH7781, - CPU_SH7785, + CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, + + /* SH4AL-DSP types */ + CPU_SH73180, CPU_SH7343, CPU_SH7722, /* Unknown subtype */ CPU_SH_NONE diff --git a/include/asm-sh/push-switch.h b/include/asm-sh/push-switch.h index dfc6bad567f..4903f9e52dd 100644 --- a/include/asm-sh/push-switch.h +++ b/include/asm-sh/push-switch.h @@ -4,6 +4,7 @@ #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/workqueue.h> +#include <linux/platform_device.h> struct push_switch { /* switch state */ @@ -12,6 +13,8 @@ struct push_switch { struct timer_list debounce; /* workqueue */ struct work_struct work; + /* platform device, for workqueue handler */ + struct platform_device *pdev; }; struct push_switch_platform_info { diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h index 0c01dc55081..879f741105d 100644 --- a/include/asm-sh/thread_info.h +++ b/include/asm-sh/thread_info.h @@ -106,6 +106,7 @@ static inline struct thread_info *current_thread_info(void) #define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ #define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ #define TIF_MEMDIE 18 +#define TIF_FREEZE 19 #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) @@ -114,6 +115,7 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) #define _TIF_USEDFPU (1<<TIF_USEDFPU) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) +#define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_WORK_MASK 0x000000FE /* work to do on interrupt/exception return */ #define _TIF_ALLWORK_MASK 0x000000FF /* work to do on any return to u-space */ diff --git a/include/asm-sh64/pgalloc.h b/include/asm-sh64/pgalloc.h index b29dd468817..cb803e56cb6 100644 --- a/include/asm-sh64/pgalloc.h +++ b/include/asm-sh64/pgalloc.h @@ -41,7 +41,7 @@ static inline void pgd_init(unsigned long page) static inline pgd_t *get_pgd_slow(void) { unsigned int pgd_size = (USER_PTRS_PER_PGD * sizeof(pgd_t)); - pgd_t *ret = (pgd_t *)kmalloc(pgd_size, GFP_KERNEL); + pgd_t *ret = kmalloc(pgd_size, GFP_KERNEL); return ret; } diff --git a/include/asm-sparc64/dma.h b/include/asm-sparc64/dma.h index 27f65972b3b..93e5a062df8 100644 --- a/include/asm-sparc64/dma.h +++ b/include/asm-sparc64/dma.h @@ -152,9 +152,9 @@ extern void dvma_init(struct sbus_bus *); #define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) /* Yes, I hack a lot of elisp in my spare time... */ -#define DMA_ERROR_P(regs) (((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR)) -#define DMA_IRQ_P(regs) (((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))) -#define DMA_WRITE_P(regs) (((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE)) +#define DMA_ERROR_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR)) +#define DMA_IRQ_P(regs) ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)) +#define DMA_WRITE_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE)) #define DMA_OFF(__regs) \ do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ tmp &= ~DMA_ENABLE; \ diff --git a/include/asm-sparc64/irqflags.h b/include/asm-sparc64/irqflags.h new file mode 100644 index 00000000000..024fc54d068 --- /dev/null +++ b/include/asm-sparc64/irqflags.h @@ -0,0 +1,89 @@ +/* + * include/asm-sparc64/irqflags.h + * + * IRQ flags handling + * + * This file gets included from lowlevel asm headers too, to provide + * wrapped versions of the local_irq_*() APIs, based on the + * raw_local_irq_*() functions from the lowlevel headers. + */ +#ifndef _ASM_IRQFLAGS_H +#define _ASM_IRQFLAGS_H + +#ifndef __ASSEMBLY__ + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__( + "rdpr %%pil, %0" + : "=r" (flags) + ); + + return flags; +} + +#define raw_local_save_flags(flags) \ + do { (flags) = __raw_local_save_flags(); } while (0) + +static inline void raw_local_irq_restore(unsigned long flags) +{ + __asm__ __volatile__( + "wrpr %0, %%pil" + : /* no output */ + : "r" (flags) + : "memory" + ); +} + +static inline void raw_local_irq_disable(void) +{ + __asm__ __volatile__( + "wrpr 15, %%pil" + : /* no outputs */ + : /* no inputs */ + : "memory" + ); +} + +static inline void raw_local_irq_enable(void) +{ + __asm__ __volatile__( + "wrpr 0, %%pil" + : /* no outputs */ + : /* no inputs */ + : "memory" + ); +} + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return (flags > 0); +} + +static inline int raw_irqs_disabled(void) +{ + unsigned long flags = __raw_local_save_flags(); + + return raw_irqs_disabled_flags(flags); +} + +/* + * For spinlocks, etc: + */ +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long flags = __raw_local_save_flags(); + + raw_local_irq_disable(); + + return flags; +} + +#define raw_local_irq_save(flags) \ + do { (flags) = __raw_local_irq_save(); } while (0) + +#endif /* (__ASSEMBLY__) */ + +#endif /* !(_ASM_IRQFLAGS_H) */ diff --git a/include/asm-sparc64/kprobes.h b/include/asm-sparc64/kprobes.h index c9f5c34d318..becc38fa06c 100644 --- a/include/asm-sparc64/kprobes.h +++ b/include/asm-sparc64/kprobes.h @@ -13,7 +13,11 @@ typedef u32 kprobe_opcode_t; #define JPROBE_ENTRY(pentry) (kprobe_opcode_t *)pentry #define arch_remove_kprobe(p) do {} while (0) #define ARCH_INACTIVE_KPROBE_COUNT 0 -#define flush_insn_slot(p) do { } while (0) + +#define flush_insn_slot(p) \ +do { flushi(&(p)->ainsn.insn[0]); \ + flushi(&(p)->ainsn.insn[1]); \ +} while (0) /* Architecture specific copy of original instruction*/ struct arch_specific_insn { @@ -23,7 +27,7 @@ struct arch_specific_insn { struct prev_kprobe { struct kprobe *kp; - unsigned int status; + unsigned long status; unsigned long orig_tnpc; unsigned long orig_tstate_pil; }; @@ -33,10 +37,7 @@ struct kprobe_ctlblk { unsigned long kprobe_status; unsigned long kprobe_orig_tnpc; unsigned long kprobe_orig_tstate_pil; - long *jprobe_saved_esp; struct pt_regs jprobe_saved_regs; - struct pt_regs *jprobe_saved_regs_location; - struct sparc_stackf jprobe_saved_stack; struct prev_kprobe prev_kprobe; }; diff --git a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h index cef5e827042..1294b7ce5d0 100644 --- a/include/asm-sparc64/rwsem.h +++ b/include/asm-sparc64/rwsem.h @@ -23,20 +23,33 @@ struct rw_semaphore { signed int count; spinlock_t wait_lock; struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif }; +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + #define __RWSEM_INITIALIZER(name) \ -{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) } +{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \ + __RWSEM_DEP_MAP_INIT(name) } #define DECLARE_RWSEM(name) \ struct rw_semaphore name = __RWSEM_INITIALIZER(name) -static __inline__ void init_rwsem(struct rw_semaphore *sem) -{ - sem->count = RWSEM_UNLOCKED_VALUE; - spin_lock_init(&sem->wait_lock); - INIT_LIST_HEAD(&sem->wait_list); -} +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ +do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ +} while (0) extern void __down_read(struct rw_semaphore *sem); extern int __down_read_trylock(struct rw_semaphore *sem); @@ -46,6 +59,11 @@ extern void __up_read(struct rw_semaphore *sem); extern void __up_write(struct rw_semaphore *sem); extern void __downgrade_write(struct rw_semaphore *sem); +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) +{ + __down_write(sem); +} + static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) { return atomic_add_return(delta, (atomic_t *)(&sem->count)); diff --git a/include/asm-sparc64/system.h b/include/asm-sparc64/system.h index a8b7432c9a7..32281acb878 100644 --- a/include/asm-sparc64/system.h +++ b/include/asm-sparc64/system.h @@ -7,6 +7,9 @@ #include <asm/visasm.h> #ifndef __ASSEMBLY__ + +#include <linux/irqflags.h> + /* * Sparc (general) CPU types */ @@ -72,52 +75,6 @@ do { __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" \ #endif -#define setipl(__new_ipl) \ - __asm__ __volatile__("wrpr %0, %%pil" : : "r" (__new_ipl) : "memory") - -#define local_irq_disable() \ - __asm__ __volatile__("wrpr 15, %%pil" : : : "memory") - -#define local_irq_enable() \ - __asm__ __volatile__("wrpr 0, %%pil" : : : "memory") - -#define getipl() \ -({ unsigned long retval; __asm__ __volatile__("rdpr %%pil, %0" : "=r" (retval)); retval; }) - -#define swap_pil(__new_pil) \ -({ unsigned long retval; \ - __asm__ __volatile__("rdpr %%pil, %0\n\t" \ - "wrpr %1, %%pil" \ - : "=&r" (retval) \ - : "r" (__new_pil) \ - : "memory"); \ - retval; \ -}) - -#define read_pil_and_cli() \ -({ unsigned long retval; \ - __asm__ __volatile__("rdpr %%pil, %0\n\t" \ - "wrpr 15, %%pil" \ - : "=r" (retval) \ - : : "memory"); \ - retval; \ -}) - -#define local_save_flags(flags) ((flags) = getipl()) -#define local_irq_save(flags) ((flags) = read_pil_and_cli()) -#define local_irq_restore(flags) setipl((flags)) - -/* On sparc64 IRQ flags are the PIL register. A value of zero - * means all interrupt levels are enabled, any other value means - * only IRQ levels greater than that value will be received. - * Consequently this means that the lowest IRQ level is one. - */ -#define irqs_disabled() \ -({ unsigned long flags; \ - local_save_flags(flags);\ - (flags > 0); \ -}) - #define nop() __asm__ __volatile__ ("nop") #define read_barrier_depends() do { } while(0) diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h index f2352606a79..c2a16e18849 100644 --- a/include/asm-sparc64/ttable.h +++ b/include/asm-sparc64/ttable.h @@ -137,10 +137,49 @@ #endif #define BREAKPOINT_TRAP TRAP(breakpoint_trap) +#ifdef CONFIG_TRACE_IRQFLAGS + +#define TRAP_IRQ(routine, level) \ + rdpr %pil, %g2; \ + wrpr %g0, 15, %pil; \ + sethi %hi(1f-4), %g7; \ + ba,pt %xcc, etrap_irq; \ + or %g7, %lo(1f-4), %g7; \ + nop; \ + nop; \ + nop; \ + .subsection 2; \ +1: call trace_hardirqs_off; \ + nop; \ + mov level, %o0; \ + call routine; \ + add %sp, PTREGS_OFF, %o1; \ + ba,a,pt %xcc, rtrap_irq; \ + .previous; + +#define TICK_SMP_IRQ \ + rdpr %pil, %g2; \ + wrpr %g0, 15, %pil; \ + sethi %hi(1f-4), %g7; \ + ba,pt %xcc, etrap_irq; \ + or %g7, %lo(1f-4), %g7; \ + nop; \ + nop; \ + nop; \ + .subsection 2; \ +1: call trace_hardirqs_off; \ + nop; \ + call smp_percpu_timer_interrupt; \ + add %sp, PTREGS_OFF, %o0; \ + ba,a,pt %xcc, rtrap_irq; \ + .previous; + +#else + #define TRAP_IRQ(routine, level) \ rdpr %pil, %g2; \ wrpr %g0, 15, %pil; \ - b,pt %xcc, etrap_irq; \ + ba,pt %xcc, etrap_irq; \ rd %pc, %g7; \ mov level, %o0; \ call routine; \ @@ -151,12 +190,14 @@ rdpr %pil, %g2; \ wrpr %g0, 15, %pil; \ sethi %hi(109f), %g7; \ - b,pt %xcc, etrap_irq; \ + ba,pt %xcc, etrap_irq; \ 109: or %g7, %lo(109b), %g7; \ call smp_percpu_timer_interrupt; \ add %sp, PTREGS_OFF, %o0; \ ba,a,pt %xcc, rtrap_irq; +#endif + #define TRAP_IVEC TRAP_NOSAVE(do_ivec) #define BTRAP(lvl) TRAP_ARG(bad_trap, lvl) diff --git a/include/asm-x86_64/msr.h b/include/asm-x86_64/msr.h index 952783d35c7..3227bc93d69 100644 --- a/include/asm-x86_64/msr.h +++ b/include/asm-x86_64/msr.h @@ -189,6 +189,7 @@ static inline unsigned int cpuid_edx(unsigned int op) #define MSR_IA32_PERFCTR0 0xc1 #define MSR_IA32_PERFCTR1 0xc2 +#define MSR_FSB_FREQ 0xcd #define MSR_MTRRcap 0x0fe #define MSR_IA32_BBL_CR_CTL 0x119 @@ -311,6 +312,9 @@ static inline unsigned int cpuid_edx(unsigned int op) #define MSR_IA32_PERF_STATUS 0x198 #define MSR_IA32_PERF_CTL 0x199 +#define MSR_IA32_MPERF 0xE7 +#define MSR_IA32_APERF 0xE8 + #define MSR_IA32_THERM_CONTROL 0x19a #define MSR_IA32_THERM_INTERRUPT 0x19b #define MSR_IA32_THERM_STATUS 0x19c diff --git a/include/asm-x86_64/thread_info.h b/include/asm-x86_64/thread_info.h index 787a08114b4..74a6c74397f 100644 --- a/include/asm-x86_64/thread_info.h +++ b/include/asm-x86_64/thread_info.h @@ -122,6 +122,7 @@ static inline struct thread_info *stack_thread_info(void) #define TIF_MEMDIE 20 #define TIF_DEBUG 21 /* uses debug registers */ #define TIF_IO_BITMAP 22 /* uses I/O bitmap */ +#define TIF_FREEZE 23 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) @@ -137,6 +138,7 @@ static inline struct thread_info *stack_thread_info(void) #define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING) #define _TIF_DEBUG (1<<TIF_DEBUG) #define _TIF_IO_BITMAP (1<<TIF_IO_BITMAP) +#define _TIF_FREEZE (1<<TIF_FREEZE) /* work to do on interrupt/exception return */ #define _TIF_WORK_MASK \ diff --git a/include/asm-x86_64/topology.h b/include/asm-x86_64/topology.h index 5c8f49280db..2facec5914d 100644 --- a/include/asm-x86_64/topology.h +++ b/include/asm-x86_64/topology.h @@ -47,6 +47,7 @@ extern int __node_distance(int, int); .flags = SD_LOAD_BALANCE \ | SD_BALANCE_FORK \ | SD_BALANCE_EXEC \ + | SD_SERIALIZE \ | SD_WAKE_BALANCE, \ .last_balance = jiffies, \ .balance_interval = 1, \ diff --git a/include/asm-xtensa/asmmacro.h b/include/asm-xtensa/asmmacro.h new file mode 100644 index 00000000000..76915cabad1 --- /dev/null +++ b/include/asm-xtensa/asmmacro.h @@ -0,0 +1,153 @@ +/* + * include/asm-xtensa/asmmacro.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005 Tensilica Inc. + */ + +#ifndef _XTENSA_ASMMACRO_H +#define _XTENSA_ASMMACRO_H + +#include <asm/variant/core.h> + +/* + * Some little helpers for loops. Use zero-overhead-loops + * where applicable and if supported by the processor. + * + * __loopi ar, at, size, inc + * ar register initialized with the start address + * at scratch register used by macro + * size size immediate value + * inc increment + * + * __loops ar, as, at, inc_log2[, mask_log2][, cond][, ncond] + * ar register initialized with the start address + * as register initialized with the size + * at scratch register use by macro + * inc_log2 increment [in log2] + * mask_log2 mask [in log2] + * cond true condition (used in loop'cond') + * ncond false condition (used in b'ncond') + * + * __loop as + * restart loop. 'as' register must not have been modified! + * + * __endla ar, at, incr + * ar start address (modified) + * as scratch register used by macro + * inc increment + */ + +/* + * loop for given size as immediate + */ + + .macro __loopi ar, at, size, incr + +#if XCHAL_HAVE_LOOPS + movi \at, ((\size + \incr - 1) / (\incr)) + loop \at, 99f +#else + addi \at, \ar, \size + 98: +#endif + + .endm + +/* + * loop for given size in register + */ + + .macro __loops ar, as, at, incr_log2, mask_log2, cond, ncond + +#if XCHAL_HAVE_LOOPS + .ifgt \incr_log2 - 1 + addi \at, \as, (1 << \incr_log2) - 1 + .ifnc \mask_log2, + extui \at, \at, \incr_log2, \mask_log2 + .else + srli \at, \at, \incr_log2 + .endif + .endif + loop\cond \at, 99f +#else + .ifnc \mask_log2, + extui \at, \as, \incr_log2, \mask_log2 + .else + .ifnc \ncond, + srli \at, \as, \incr_log2 + .endif + .endif + .ifnc \ncond, + b\ncond \at, 99f + + .endif + .ifnc \mask_log2, + slli \at, \at, \incr_log2 + add \at, \ar, \at + .else + add \at, \ar, \as + .endif +#endif + 98: + + .endm + +/* + * loop from ar to ax + */ + + .macro __loopt ar, as, at, incr_log2 + +#if XCHAL_HAVE_LOOPS + sub \at, \as, \ar + .ifgt \incr_log2 - 1 + addi \at, \at, (1 << \incr_log2) - 1 + srli \at, \at, \incr_log2 + .endif + loop \at, 99f +#else + 98: +#endif + + .endm + +/* + * restart loop. registers must be unchanged + */ + + .macro __loop as + +#if XCHAL_HAVE_LOOPS + loop \as, 99f +#else + 98: +#endif + + .endm + +/* + * end of loop with no increment of the address. + */ + + .macro __endl ar, as +#if !XCHAL_HAVE_LOOPS + bltu \ar, \as, 98b +#endif + 99: + .endm + +/* + * end of loop with increment of the address. + */ + + .macro __endla ar, as, incr + addi \ar, \ar, \incr + __endl \ar \as + .endm + + +#endif /* _XTENSA_ASMMACRO_H */ diff --git a/include/asm-xtensa/bug.h b/include/asm-xtensa/bug.h index 56703659b20..3e52d72712f 100644 --- a/include/asm-xtensa/bug.h +++ b/include/asm-xtensa/bug.h @@ -13,29 +13,6 @@ #ifndef _XTENSA_BUG_H #define _XTENSA_BUG_H -#include <linux/stringify.h> - -#define ILL __asm__ __volatile__ (".byte 0,0,0\n") - -#ifdef CONFIG_KALLSYMS -# define BUG() do { \ - printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \ - ILL; \ -} while (0) -#else -# define BUG() do { \ - printk("kernel BUG!\n"); \ - ILL; \ -} while (0) -#endif - -#define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0) -#define PAGE_BUG(page) do { BUG(); } while (0) -#define WARN_ON(condition) do { \ - if (unlikely((condition)!=0)) { \ - printk ("Warning in %s at %s:%d\n", __FUNCTION__, __FILE__, __LINE__); \ - dump_stack(); \ - } \ -} while (0) +#include <asm-generic/bug.h> #endif /* _XTENSA_BUG_H */ diff --git a/include/asm-xtensa/byteorder.h b/include/asm-xtensa/byteorder.h index 0b1552569aa..0f540a5f4c0 100644 --- a/include/asm-xtensa/byteorder.h +++ b/include/asm-xtensa/byteorder.h @@ -11,10 +11,9 @@ #ifndef _XTENSA_BYTEORDER_H #define _XTENSA_BYTEORDER_H -#include <asm/processor.h> #include <asm/types.h> -static __inline__ __const__ __u32 ___arch__swab32(__u32 x) +static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x) { __u32 res; /* instruction sequence from Xtensa ISA release 2/2000 */ @@ -29,7 +28,7 @@ static __inline__ __const__ __u32 ___arch__swab32(__u32 x) return res; } -static __inline__ __const__ __u16 ___arch__swab16(__u16 x) +static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x) { /* Given that 'short' values are signed (i.e., can be negative), * we cannot assume that the upper 16-bits of the register are diff --git a/include/asm-xtensa/cache.h b/include/asm-xtensa/cache.h index 1e79c0e2746..1c4a78f29ae 100644 --- a/include/asm-xtensa/cache.h +++ b/include/asm-xtensa/cache.h @@ -4,7 +4,6 @@ * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. - * 2 of the License, or (at your option) any later version. * * (C) 2001 - 2005 Tensilica Inc. */ @@ -12,21 +11,14 @@ #ifndef _XTENSA_CACHE_H #define _XTENSA_CACHE_H -#include <xtensa/config/core.h> +#include <asm/variant/core.h> -#if XCHAL_ICACHE_SIZE > 0 -# if (XCHAL_ICACHE_SIZE % (XCHAL_ICACHE_LINESIZE*XCHAL_ICACHE_WAYS*4)) != 0 -# error cache configuration outside expected/supported range! -# endif -#endif +#define L1_CACHE_SHIFT XCHAL_DCACHE_LINEWIDTH +#define L1_CACHE_BYTES XCHAL_DCACHE_LINESIZE +#define SMP_CACHE_BYTES L1_CACHE_BYTES -#if XCHAL_DCACHE_SIZE > 0 -# if (XCHAL_DCACHE_SIZE % (XCHAL_DCACHE_LINESIZE*XCHAL_DCACHE_WAYS*4)) != 0 -# error cache configuration outside expected/supported range! -# endif -#endif +#define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE/XCHAL_DCACHE_WAYS) +#define ICACHE_WAY_SIZE (XCHAL_ICACHE_SIZE/XCHAL_ICACHE_WAYS) -#define L1_CACHE_SHIFT XCHAL_CACHE_LINEWIDTH_MAX -#define L1_CACHE_BYTES XCHAL_CACHE_LINESIZE_MAX #endif /* _XTENSA_CACHE_H */ diff --git a/include/asm-xtensa/cacheasm.h b/include/asm-xtensa/cacheasm.h new file mode 100644 index 00000000000..2c20a58f94c --- /dev/null +++ b/include/asm-xtensa/cacheasm.h @@ -0,0 +1,177 @@ +/* + * include/asm-xtensa/cacheasm.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2006 Tensilica Inc. + */ + +#include <asm/cache.h> +#include <asm/asmmacro.h> +#include <linux/stringify.h> + +/* + * Define cache functions as macros here so that they can be used + * by the kernel and boot loader. We should consider moving them to a + * library that can be linked by both. + * + * Locking + * + * ___unlock_dcache_all + * ___unlock_icache_all + * + * Flush and invaldating + * + * ___flush_invalidate_dcache_{all|range|page} + * ___flush_dcache_{all|range|page} + * ___invalidate_dcache_{all|range|page} + * ___invalidate_icache_{all|range|page} + * + */ + + .macro __loop_cache_all ar at insn size line_width + + movi \ar, 0 + + __loopi \ar, \at, \size, (4 << (\line_width)) + \insn \ar, 0 << (\line_width) + \insn \ar, 1 << (\line_width) + \insn \ar, 2 << (\line_width) + \insn \ar, 3 << (\line_width) + __endla \ar, \at, 4 << (\line_width) + + .endm + + + .macro __loop_cache_range ar as at insn line_width + + extui \at, \ar, 0, \line_width + add \as, \as, \at + + __loops \ar, \as, \at, \line_width + \insn \ar, 0 + __endla \ar, \at, (1 << (\line_width)) + + .endm + + + .macro __loop_cache_page ar at insn line_width + + __loopi \ar, \at, PAGE_SIZE, 4 << (\line_width) + \insn \ar, 0 << (\line_width) + \insn \ar, 1 << (\line_width) + \insn \ar, 2 << (\line_width) + \insn \ar, 3 << (\line_width) + __endla \ar, \at, 4 << (\line_width) + + .endm + + +#if XCHAL_DCACHE_LINE_LOCKABLE + + .macro ___unlock_dcache_all ar at + + __loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH + + .endm + +#endif + +#if XCHAL_ICACHE_LINE_LOCKABLE + + .macro ___unlock_icache_all ar at + + __loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE XCHAL_ICACHE_LINEWIDTH + + .endm +#endif + + .macro ___flush_invalidate_dcache_all ar at + + __loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___flush_dcache_all ar at + + __loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_dcache_all ar at + + __loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \ + XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_icache_all ar at + + __loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \ + XCHAL_ICACHE_LINEWIDTH + + .endm + + + + .macro ___flush_invalidate_dcache_range ar as at + + __loop_cache_range \ar \as \at dhwbi XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___flush_dcache_range ar as at + + __loop_cache_range \ar \as \at dhwb XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_dcache_range ar as at + + __loop_cache_range \ar \as \at dhi XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_icache_range ar as at + + __loop_cache_range \ar \as \at ihi XCHAL_ICACHE_LINEWIDTH + + .endm + + + + .macro ___flush_invalidate_dcache_page ar as + + __loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___flush_dcache_page ar as + + __loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_dcache_page ar as + + __loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH + + .endm + + + .macro ___invalidate_icache_page ar as + + __loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH + + .endm + diff --git a/include/asm-xtensa/cacheflush.h b/include/asm-xtensa/cacheflush.h index 44a36e08784..337765b629d 100644 --- a/include/asm-xtensa/cacheflush.h +++ b/include/asm-xtensa/cacheflush.h @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * (C) 2001 - 2005 Tensilica Inc. + * (C) 2001 - 2006 Tensilica Inc. */ #ifndef _XTENSA_CACHEFLUSH_H diff --git a/include/asm-xtensa/checksum.h b/include/asm-xtensa/checksum.h index 5435aff9a4b..23534c60b3a 100644 --- a/include/asm-xtensa/checksum.h +++ b/include/asm-xtensa/checksum.h @@ -12,7 +12,7 @@ #define _XTENSA_CHECKSUM_H #include <linux/in6.h> -#include <xtensa/config/core.h> +#include <asm/variant/core.h> /* * computes the checksum of a memory block at buff, length len, diff --git a/include/asm-xtensa/coprocessor.h b/include/asm-xtensa/coprocessor.h index 5093034723b..bd09ec02d57 100644 --- a/include/asm-xtensa/coprocessor.h +++ b/include/asm-xtensa/coprocessor.h @@ -11,7 +11,16 @@ #ifndef _XTENSA_COPROCESSOR_H #define _XTENSA_COPROCESSOR_H -#include <xtensa/config/core.h> +#include <asm/variant/core.h> +#include <asm/variant/tie.h> + +#if !XCHAL_HAVE_CP + +#define XTENSA_CP_EXTRA_OFFSET 0 +#define XTENSA_CP_EXTRA_ALIGN 1 /* must be a power of 2 */ +#define XTENSA_CP_EXTRA_SIZE 0 + +#else #define XTOFS(last_start,last_size,align) \ ((last_start+last_size+align-1) & -align) @@ -67,4 +76,6 @@ extern void save_coprocessor_registers(void*, int); # endif #endif +#endif + #endif /* _XTENSA_COPROCESSOR_H */ diff --git a/include/asm-xtensa/dma.h b/include/asm-xtensa/dma.h index db2633f6778..e30f3abf48f 100644 --- a/include/asm-xtensa/dma.h +++ b/include/asm-xtensa/dma.h @@ -12,7 +12,6 @@ #define _XTENSA_DMA_H #include <asm/io.h> /* need byte IO */ -#include <xtensa/config/core.h> /* * This is only to be defined if we have PC-like DMA. @@ -44,7 +43,9 @@ * enters another area, and virt_to_phys() may not return * the value desired). */ -#define MAX_DMA_ADDRESS (PAGE_OFFSET + XCHAL_KSEG_CACHED_SIZE - 1) + +#define MAX_DMA_ADDRESS (PAGE_OFFSET + XCHAL_KIO_SIZE - 1) + /* Reserve and release a DMA channel */ extern int request_dma(unsigned int dmanr, const char * device_id); diff --git a/include/asm-xtensa/elf.h b/include/asm-xtensa/elf.h index de0667453b2..f0f9fd8560a 100644 --- a/include/asm-xtensa/elf.h +++ b/include/asm-xtensa/elf.h @@ -13,9 +13,8 @@ #ifndef _XTENSA_ELF_H #define _XTENSA_ELF_H +#include <asm/variant/core.h> #include <asm/ptrace.h> -#include <asm/coprocessor.h> -#include <xtensa/config/core.h> /* Xtensa processor ELF architecture-magic number */ @@ -118,11 +117,15 @@ typedef elf_greg_t elf_gregset_t[ELF_NGREG]; * using memcpy(). But we do allow space for such alignment, * to allow optimizations of layout and copying. */ - +#if 0 #define TOTAL_FPREGS_SIZE \ (4 + XTENSA_CPE_LTABLE_SIZE + XTENSA_CP_EXTRA_SIZE) #define ELF_NFPREG \ ((TOTAL_FPREGS_SIZE + sizeof(elf_fpreg_t) - 1) / sizeof(elf_fpreg_t)) +#else +#define TOTAL_FPREGS_SIZE 0 +#define ELF_NFPREG 0 +#endif typedef unsigned int elf_fpreg_t; typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG]; diff --git a/include/asm-xtensa/fcntl.h b/include/asm-xtensa/fcntl.h index ec066ae96ca..0609fc691b7 100644 --- a/include/asm-xtensa/fcntl.h +++ b/include/asm-xtensa/fcntl.h @@ -14,48 +14,86 @@ /* open/fcntl - O_SYNC is only implemented on blocks devices and on files located on an ext2 file system */ -#define O_APPEND 0x0008 -#define O_SYNC 0x0010 -#define O_NONBLOCK 0x0080 -#define O_CREAT 0x0100 /* not fcntl */ -#define O_EXCL 0x0400 /* not fcntl */ -#define O_NOCTTY 0x0800 /* not fcntl */ -#define FASYNC 0x1000 /* fcntl, for BSD compatibility */ -#define O_LARGEFILE 0x2000 /* allow large file opens - currently ignored */ -#define O_DIRECT 0x8000 /* direct disk access hint - currently ignored*/ -#define O_NOATIME 0x100000 - -#define F_GETLK 14 -#define F_GETLK64 15 +#define O_ACCMODE 0003 +#define O_RDONLY 00 +#define O_WRONLY 01 +#define O_RDWR 02 +#define O_CREAT 0100 /* not fcntl */ +#define O_EXCL 0200 /* not fcntl */ +#define O_NOCTTY 0400 /* not fcntl */ +#define O_TRUNC 01000 /* not fcntl */ +#define O_APPEND 02000 +#define O_NONBLOCK 04000 +#define O_NDELAY O_NONBLOCK +#define O_SYNC 010000 +#define FASYNC 020000 /* fcntl, for BSD compatibility */ +#define O_DIRECT 040000 /* direct disk access hint */ +#define O_LARGEFILE 0100000 +#define O_DIRECTORY 0200000 /* must be a directory */ +#define O_NOFOLLOW 0400000 /* don't follow links */ +#define O_NOATIME 01000000 + +#define F_DUPFD 0 /* dup */ +#define F_GETFD 1 /* get close_on_exec */ +#define F_SETFD 2 /* set/clear close_on_exec */ +#define F_GETFL 3 /* get file->f_flags */ +#define F_SETFL 4 /* set file->f_flags */ +#define F_GETLK 5 #define F_SETLK 6 #define F_SETLKW 7 -#define F_SETLK64 16 -#define F_SETLKW64 17 -#define F_SETOWN 24 /* for sockets. */ -#define F_GETOWN 23 /* for sockets. */ +#define F_SETOWN 8 /* for sockets. */ +#define F_GETOWN 9 /* for sockets. */ +#define F_SETSIG 10 /* for sockets. */ +#define F_GETSIG 11 /* for sockets. */ + +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 + +/* for F_[GET|SET]FL */ +#define FD_CLOEXEC 1 /* actually anything with low bit set goes */ + +/* for posix fcntl() and lockf() */ +#define F_RDLCK 0 +#define F_WRLCK 1 +#define F_UNLCK 2 + +/* for old implementation of bsd flock () */ +#define F_EXLCK 4 /* or 3 */ +#define F_SHLCK 8 /* or 4 */ -typedef struct flock { +/* for leases */ +#define F_INPROGRESS 16 + +/* operations for bsd flock(), also used by the kernel implementation */ +#define LOCK_SH 1 /* shared lock */ +#define LOCK_EX 2 /* exclusive lock */ +#define LOCK_NB 4 /* or'd with one of the above to prevent + blocking */ +#define LOCK_UN 8 /* remove lock */ + +#define LOCK_MAND 32 /* This is a mandatory flock */ +#define LOCK_READ 64 /* ... Which allows concurrent read operations */ +#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */ +#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */ + +struct flock { short l_type; short l_whence; - __kernel_off_t l_start; - __kernel_off_t l_len; - long l_sysid; - __kernel_pid_t l_pid; - long pad[4]; -} flock_t; + off_t l_start; + off_t l_len; + pid_t l_pid; +}; struct flock64 { short l_type; short l_whence; - __kernel_off_t l_start; - __kernel_off_t l_len; + loff_t l_start; + loff_t l_len; pid_t l_pid; }; -#define HAVE_ARCH_STRUCT_FLOCK -#define HAVE_ARCH_STRUCT_FLOCK64 - -#include <asm-generic/fcntl.h> +#define F_LINUX_SPECIFIC_BASE 1024 #endif /* _XTENSA_FCNTL_H */ diff --git a/include/asm-xtensa/fixmap.h b/include/asm-xtensa/fixmap.h deleted file mode 100644 index 4423b8ad495..00000000000 --- a/include/asm-xtensa/fixmap.h +++ /dev/null @@ -1,252 +0,0 @@ -/* - * include/asm-xtensa/fixmap.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - */ - -#ifndef _XTENSA_FIXMAP_H -#define _XTENSA_FIXMAP_H - -#include <asm/processor.h> - -#ifdef CONFIG_MMU - -/* - * Here we define all the compile-time virtual addresses. - */ - -#if XCHAL_SEG_MAPPABLE_VADDR != 0 -# error "Current port requires virtual user space starting at 0" -#endif -#if XCHAL_SEG_MAPPABLE_SIZE < 0x80000000 -# error "Current port requires at least 0x8000000 bytes for user space" -#endif - -/* Verify instruction/data ram/rom and xlmi don't overlay vmalloc space. */ - -#define __IN_VMALLOC(addr) \ - (((addr) >= VMALLOC_START) && ((addr) < VMALLOC_END)) -#define __SPAN_VMALLOC(start,end) \ - (((start) < VMALLOC_START) && ((end) >= VMALLOC_END)) -#define INSIDE_VMALLOC(start,end) \ - (__IN_VMALLOC((start)) || __IN_VMALLOC(end) || __SPAN_VMALLOC((start),(end))) - -#if XCHAL_NUM_INSTROM -# if XCHAL_NUM_INSTROM == 1 -# if INSIDE_VMALLOC(XCHAL_INSTROM0_VADDR,XCHAL_INSTROM0_VADDR+XCHAL_INSTROM0_SIZE) -# error vmalloc range conflicts with instrom0 -# endif -# endif -# if XCHAL_NUM_INSTROM == 2 -# if INSIDE_VMALLOC(XCHAL_INSTROM1_VADDR,XCHAL_INSTROM1_VADDR+XCHAL_INSTROM1_SIZE) -# error vmalloc range conflicts with instrom1 -# endif -# endif -#endif - -#if XCHAL_NUM_INSTRAM -# if XCHAL_NUM_INSTRAM == 1 -# if INSIDE_VMALLOC(XCHAL_INSTRAM0_VADDR,XCHAL_INSTRAM0_VADDR+XCHAL_INSTRAM0_SIZE) -# error vmalloc range conflicts with instram0 -# endif -# endif -# if XCHAL_NUM_INSTRAM == 2 -# if INSIDE_VMALLOC(XCHAL_INSTRAM1_VADDR,XCHAL_INSTRAM1_VADDR+XCHAL_INSTRAM1_SIZE) -# error vmalloc range conflicts with instram1 -# endif -# endif -#endif - -#if XCHAL_NUM_DATAROM -# if XCHAL_NUM_DATAROM == 1 -# if INSIDE_VMALLOC(XCHAL_DATAROM0_VADDR,XCHAL_DATAROM0_VADDR+XCHAL_DATAROM0_SIZE) -# error vmalloc range conflicts with datarom0 -# endif -# endif -# if XCHAL_NUM_DATAROM == 2 -# if INSIDE_VMALLOC(XCHAL_DATAROM1_VADDR,XCHAL_DATAROM1_VADDR+XCHAL_DATAROM1_SIZE) -# error vmalloc range conflicts with datarom1 -# endif -# endif -#endif - -#if XCHAL_NUM_DATARAM -# if XCHAL_NUM_DATARAM == 1 -# if INSIDE_VMALLOC(XCHAL_DATARAM0_VADDR,XCHAL_DATARAM0_VADDR+XCHAL_DATARAM0_SIZE) -# error vmalloc range conflicts with dataram0 -# endif -# endif -# if XCHAL_NUM_DATARAM == 2 -# if INSIDE_VMALLOC(XCHAL_DATARAM1_VADDR,XCHAL_DATARAM1_VADDR+XCHAL_DATARAM1_SIZE) -# error vmalloc range conflicts with dataram1 -# endif -# endif -#endif - -#if XCHAL_NUM_XLMI -# if XCHAL_NUM_XLMI == 1 -# if INSIDE_VMALLOC(XCHAL_XLMI0_VADDR,XCHAL_XLMI0_VADDR+XCHAL_XLMI0_SIZE) -# error vmalloc range conflicts with xlmi0 -# endif -# endif -# if XCHAL_NUM_XLMI == 2 -# if INSIDE_VMALLOC(XCHAL_XLMI1_VADDR,XCHAL_XLMI1_VADDR+XCHAL_XLMI1_SIZE) -# error vmalloc range conflicts with xlmi1 -# endif -# endif -#endif - -#if (XCHAL_NUM_INSTROM > 2) || \ - (XCHAL_NUM_INSTRAM > 2) || \ - (XCHAL_NUM_DATARAM > 2) || \ - (XCHAL_NUM_DATAROM > 2) || \ - (XCHAL_NUM_XLMI > 2) -# error Insufficient checks on vmalloc above for more than 2 devices -#endif - -/* - * USER_VM_SIZE does not necessarily equal TASK_SIZE. We bumped - * TASK_SIZE down to 0x4000000 to simplify the handling of windowed - * call instructions (currently limited to a range of 1 GByte). User - * tasks may very well reclaim the VM space from 0x40000000 to - * 0x7fffffff in the future, so we do not want the kernel becoming - * accustomed to having any of its stuff (e.g., page tables) in this - * region. This VM region is no-man's land for now. - */ - -#define USER_VM_START XCHAL_SEG_MAPPABLE_VADDR -#define USER_VM_SIZE 0x80000000 - -/* Size of page table: */ - -#define PGTABLE_SIZE_BITS (32 - XCHAL_MMU_MIN_PTE_PAGE_SIZE + 2) -#define PGTABLE_SIZE (1L << PGTABLE_SIZE_BITS) - -/* All kernel-mappable space: */ - -#define KERNEL_ALLMAP_START (USER_VM_START + USER_VM_SIZE) -#define KERNEL_ALLMAP_SIZE (XCHAL_SEG_MAPPABLE_SIZE - KERNEL_ALLMAP_START) - -/* Carve out page table at start of kernel-mappable area: */ - -#if KERNEL_ALLMAP_SIZE < PGTABLE_SIZE -#error "Gimme some space for page table!" -#endif -#define PGTABLE_START KERNEL_ALLMAP_START - -/* Remaining kernel-mappable space: */ - -#define KERNEL_MAPPED_START (KERNEL_ALLMAP_START + PGTABLE_SIZE) -#define KERNEL_MAPPED_SIZE (KERNEL_ALLMAP_SIZE - PGTABLE_SIZE) - -#if KERNEL_MAPPED_SIZE < 0x01000000 /* 16 MB is arbitrary for now */ -# error "Shouldn't the kernel have at least *some* mappable space?" -#endif - -#define MAX_LOW_MEMORY XCHAL_KSEG_CACHED_SIZE - -#endif - -/* - * Some constants used elsewhere, but perhaps only in Xtensa header - * files, so maybe we can get rid of some and access compile-time HAL - * directly... - * - * Note: We assume that system RAM is located at the very start of the - * kernel segments !! - */ -#define KERNEL_VM_LOW XCHAL_KSEG_CACHED_VADDR -#define KERNEL_VM_HIGH XCHAL_KSEG_BYPASS_VADDR -#define KERNEL_SPACE XCHAL_KSEG_CACHED_VADDR - -/* - * Returns the physical/virtual addresses of the kernel space - * (works with the cached kernel segment only, which is the - * one normally used for kernel operation). - */ - -/* PHYSICAL BYPASS CACHED - * - * bypass vaddr bypass paddr * cached vaddr - * cached vaddr cached paddr bypass vaddr * - * bypass paddr * bypass vaddr cached vaddr - * cached paddr * bypass vaddr cached vaddr - * other * * * - */ - -#define PHYSADDR(a) \ -(((unsigned)(a) >= XCHAL_KSEG_BYPASS_VADDR \ - && (unsigned)(a) < XCHAL_KSEG_BYPASS_VADDR + XCHAL_KSEG_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_BYPASS_VADDR + XCHAL_KSEG_BYPASS_PADDR : \ - ((unsigned)(a) >= XCHAL_KSEG_CACHED_VADDR \ - && (unsigned)(a) < XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_CACHED_VADDR + XCHAL_KSEG_CACHED_PADDR : \ - (unsigned)(a)) - -#define BYPASS_ADDR(a) \ -(((unsigned)(a) >= XCHAL_KSEG_BYPASS_PADDR \ - && (unsigned)(a) < XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_VADDR : \ - ((unsigned)(a) >= XCHAL_KSEG_CACHED_PADDR \ - && (unsigned)(a) < XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_BYPASS_VADDR : \ - ((unsigned)(a) >= XCHAL_KSEG_CACHED_VADDR \ - && (unsigned)(a) < XCHAL_KSEG_CACHED_VADDR+XCHAL_KSEG_CACHED_SIZE)? \ - (unsigned)(a) - XCHAL_KSEG_CACHED_VADDR+XCHAL_KSEG_BYPASS_VADDR: \ - (unsigned)(a)) - -#define CACHED_ADDR(a) \ -(((unsigned)(a) >= XCHAL_KSEG_BYPASS_PADDR \ - && (unsigned)(a) < XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_BYPASS_PADDR + XCHAL_KSEG_CACHED_VADDR : \ - ((unsigned)(a) >= XCHAL_KSEG_CACHED_PADDR \ - && (unsigned)(a) < XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_CACHED_PADDR + XCHAL_KSEG_CACHED_VADDR : \ - ((unsigned)(a) >= XCHAL_KSEG_BYPASS_VADDR \ - && (unsigned)(a) < XCHAL_KSEG_BYPASS_VADDR+XCHAL_KSEG_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KSEG_BYPASS_VADDR+XCHAL_KSEG_CACHED_VADDR : \ - (unsigned)(a)) - -#define PHYSADDR_IO(a) \ -(((unsigned)(a) >= XCHAL_KIO_BYPASS_VADDR \ - && (unsigned)(a) < XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_PADDR : \ - ((unsigned)(a) >= XCHAL_KIO_CACHED_VADDR \ - && (unsigned)(a) < XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_PADDR : \ - (unsigned)(a)) - -#define BYPASS_ADDR_IO(a) \ -(((unsigned)(a) >= XCHAL_KIO_BYPASS_PADDR \ - && (unsigned)(a) < XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_VADDR : \ - ((unsigned)(a) >= XCHAL_KIO_CACHED_PADDR \ - && (unsigned)(a) < XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_BYPASS_VADDR : \ - ((unsigned)(a) >= XCHAL_KIO_CACHED_VADDR \ - && (unsigned)(a) < XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_CACHED_VADDR + XCHAL_KIO_BYPASS_VADDR : \ - (unsigned)(a)) - -#define CACHED_ADDR_IO(a) \ -(((unsigned)(a) >= XCHAL_KIO_BYPASS_PADDR \ - && (unsigned)(a) < XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_BYPASS_PADDR + XCHAL_KIO_CACHED_VADDR : \ - ((unsigned)(a) >= XCHAL_KIO_CACHED_PADDR \ - && (unsigned)(a) < XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_CACHED_PADDR + XCHAL_KIO_CACHED_VADDR : \ - ((unsigned)(a) >= XCHAL_KIO_BYPASS_VADDR \ - && (unsigned)(a) < XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_BYPASS_SIZE) ? \ - (unsigned)(a) - XCHAL_KIO_BYPASS_VADDR + XCHAL_KIO_CACHED_VADDR : \ - (unsigned)(a)) - -#endif /* _XTENSA_ADDRSPACE_H */ - - - - - diff --git a/include/asm-xtensa/io.h b/include/asm-xtensa/io.h index 556e5eed34f..31ffc3f119c 100644 --- a/include/asm-xtensa/io.h +++ b/include/asm-xtensa/io.h @@ -1,5 +1,5 @@ /* - * linux/include/asm-xtensa/io.h + * include/asm-xtensa/io.h * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -15,10 +15,11 @@ #include <asm/byteorder.h> #include <linux/types.h> -#include <asm/fixmap.h> - -#define _IO_BASE 0 +#define XCHAL_KIO_CACHED_VADDR 0xf0000000 +#define XCHAL_KIO_BYPASS_VADDR 0xf8000000 +#define XCHAL_KIO_PADDR 0xf0000000 +#define XCHAL_KIO_SIZE 0x08000000 /* * swap functions to change byte order from little-endian to big-endian and @@ -42,40 +43,43 @@ static inline unsigned int _swapl (unsigned int v) static inline unsigned long virt_to_phys(volatile void * address) { - return PHYSADDR((unsigned long)address); + return __pa(address); } static inline void * phys_to_virt(unsigned long address) { - return (void*) CACHED_ADDR(address); + return __va(address); } /* - * IO bus memory addresses are also 1:1 with the physical address + * virt_to_bus and bus_to_virt are deprecated. */ -static inline unsigned long virt_to_bus(volatile void * address) -{ - return PHYSADDR((unsigned long)address); -} - -static inline void * bus_to_virt (unsigned long address) -{ - return (void *) CACHED_ADDR(address); -} +#define virt_to_bus(x) virt_to_phys(x) +#define bus_to_virt(x) phys_to_virt(x) /* - * Change "struct page" to physical address. + * Return the virtual (cached) address for the specified bus memory. + * Note that we currently don't support any address outside the KIO segment. */ static inline void *ioremap(unsigned long offset, unsigned long size) { - return (void *) CACHED_ADDR_IO(offset); + if (offset >= XCHAL_KIO_PADDR + && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE) + return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_BYPASS_VADDR); + + else + BUG(); } static inline void *ioremap_nocache(unsigned long offset, unsigned long size) { - return (void *) BYPASS_ADDR_IO(offset); + if (offset >= XCHAL_KIO_PADDR + && offset < XCHAL_KIO_PADDR + XCHAL_KIO_SIZE) + return (void*)(offset-XCHAL_KIO_PADDR+XCHAL_KIO_CACHED_VADDR); + else + BUG(); } static inline void iounmap(void *addr) @@ -121,9 +125,6 @@ static inline void __raw_writel(__u32 b, volatile void __iomem *addr) *(__force volatile __u32 *)(addr) = b; } - - - /* These are the definitions for the x86 IO instructions * inb/inw/inl/outb/outw/outl, the "string" versions * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions @@ -131,11 +132,11 @@ static inline void __raw_writel(__u32 b, volatile void __iomem *addr) * The macros don't do byte-swapping. */ -#define inb(port) readb((u8 *)((port)+_IO_BASE)) -#define outb(val, port) writeb((val),(u8 *)((unsigned long)(port)+_IO_BASE)) -#define inw(port) readw((u16 *)((port)+_IO_BASE)) -#define outw(val, port) writew((val),(u16 *)((unsigned long)(port)+_IO_BASE)) -#define inl(port) readl((u32 *)((port)+_IO_BASE)) +#define inb(port) readb((u8 *)((port))) +#define outb(val, port) writeb((val),(u8 *)((unsigned long)(port))) +#define inw(port) readw((u16 *)((port))) +#define outw(val, port) writew((val),(u16 *)((unsigned long)(port))) +#define inl(port) readl((u32 *)((port))) #define outl(val, port) writel((val),(u32 *)((unsigned long)(port))) #define inb_p(port) inb((port)) @@ -180,14 +181,13 @@ extern void outsl (unsigned long port, const void *src, unsigned long count); /* - * * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * * access - * */ + * Convert a physical pointer to a virtual kernel pointer for /dev/mem access + */ #define xlate_dev_mem_ptr(p) __va(p) /* - * * Convert a virtual cached pointer to an uncached pointer - * */ + * Convert a virtual cached pointer to an uncached pointer + */ #define xlate_dev_kmem_ptr(p) p diff --git a/include/asm-xtensa/irq.h b/include/asm-xtensa/irq.h index 049fde7e752..fc73b7f11af 100644 --- a/include/asm-xtensa/irq.h +++ b/include/asm-xtensa/irq.h @@ -12,8 +12,7 @@ #define _XTENSA_IRQ_H #include <asm/platform/hardware.h> - -#include <xtensa/config/core.h> +#include <asm/variant/core.h> #ifndef PLATFORM_NR_IRQS # define PLATFORM_NR_IRQS 0 @@ -27,10 +26,5 @@ static __inline__ int irq_canonicalize(int irq) } struct irqaction; -#if 0 // FIXME -extern void disable_irq_nosync(unsigned int); -extern void disable_irq(unsigned int); -extern void enable_irq(unsigned int); -#endif #endif /* _XTENSA_IRQ_H */ diff --git a/include/asm-xtensa/irq_regs.h b/include/asm-xtensa/irq_regs.h new file mode 100644 index 00000000000..3dd9c0b7027 --- /dev/null +++ b/include/asm-xtensa/irq_regs.h @@ -0,0 +1 @@ +#include <asm-generic/irq_regs.h> diff --git a/include/asm-xtensa/mmu_context.h b/include/asm-xtensa/mmu_context.h index af683a74a4e..f14851f086c 100644 --- a/include/asm-xtensa/mmu_context.h +++ b/include/asm-xtensa/mmu_context.h @@ -16,187 +16,32 @@ #include <linux/stringify.h> #include <asm/pgtable.h> -#include <asm/mmu_context.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> -/* - * Linux was ported to Xtensa assuming all auto-refill ways in set 0 - * had the same properties (a very likely assumption). Multiple sets - * of auto-refill ways will still work properly, but not as optimally - * as the Xtensa designer may have assumed. - * - * We make this case a hard #error, killing the kernel build, to alert - * the developer to this condition (which is more likely an error). - * You super-duper clever developers can change it to a warning or - * remove it altogether if you think you know what you're doing. :) - */ +#define XCHAL_MMU_ASID_BITS 8 #if (XCHAL_HAVE_TLBS != 1) # error "Linux must have an MMU!" #endif -#if ((XCHAL_ITLB_ARF_WAYS == 0) || (XCHAL_DTLB_ARF_WAYS == 0)) -# error "MMU must have auto-refill ways" -#endif - -#if ((XCHAL_ITLB_ARF_SETS != 1) || (XCHAL_DTLB_ARF_SETS != 1)) -# error Linux may not use all auto-refill ways as efficiently as you think -#endif - -#if (XCHAL_MMU_MAX_PTE_PAGE_SIZE != XCHAL_MMU_MIN_PTE_PAGE_SIZE) -# error Only one page size allowed! -#endif - extern unsigned long asid_cache; -extern pgd_t *current_pgd; - -/* - * Define the number of entries per auto-refill way in set 0 of both I and D - * TLBs. We deal only with set 0 here (an assumption further explained in - * assertions.h). Also, define the total number of ARF entries in both TLBs. - */ - -#define ITLB_ENTRIES_PER_ARF_WAY (XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,ENTRIES)) -#define DTLB_ENTRIES_PER_ARF_WAY (XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,ENTRIES)) - -#define ITLB_ENTRIES \ - (ITLB_ENTRIES_PER_ARF_WAY * (XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,WAYS))) -#define DTLB_ENTRIES \ - (DTLB_ENTRIES_PER_ARF_WAY * (XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,WAYS))) - - -/* - * SMALLEST_NTLB_ENTRIES is the smaller of ITLB_ENTRIES and DTLB_ENTRIES. - * In practice, they are probably equal. This macro simplifies function - * flush_tlb_range(). - */ - -#if (DTLB_ENTRIES < ITLB_ENTRIES) -# define SMALLEST_NTLB_ENTRIES DTLB_ENTRIES -#else -# define SMALLEST_NTLB_ENTRIES ITLB_ENTRIES -#endif - - -/* - * asid_cache tracks only the ASID[USER_RING] field of the RASID special - * register, which is the current user-task asid allocation value. - * mm->context has the same meaning. When it comes time to write the - * asid_cache or mm->context values to the RASID special register, we first - * shift the value left by 8, then insert the value. - * ASID[0] always contains the kernel's asid value, and we reserve three - * other asid values that we never assign to user tasks. - */ - -#define ASID_INC 0x1 -#define ASID_MASK ((1 << XCHAL_MMU_ASID_BITS) - 1) - -/* - * XCHAL_MMU_ASID_INVALID is a configurable Xtensa processor constant - * indicating invalid address space. XCHAL_MMU_ASID_KERNEL is a configurable - * Xtensa processor constant indicating the kernel address space. They can - * be arbitrary values. - * - * We identify three more unique, reserved ASID values to use in the unused - * ring positions. No other user process will be assigned these reserved - * ASID values. - * - * For example, given that - * - * XCHAL_MMU_ASID_INVALID == 0 - * XCHAL_MMU_ASID_KERNEL == 1 - * - * the following maze of #if statements would generate - * - * ASID_RESERVED_1 == 2 - * ASID_RESERVED_2 == 3 - * ASID_RESERVED_3 == 4 - * ASID_FIRST_NONRESERVED == 5 - */ - -#if (XCHAL_MMU_ASID_INVALID != XCHAL_MMU_ASID_KERNEL + 1) -# define ASID_RESERVED_1 ((XCHAL_MMU_ASID_KERNEL + 1) & ASID_MASK) -#else -# define ASID_RESERVED_1 ((XCHAL_MMU_ASID_KERNEL + 2) & ASID_MASK) -#endif - -#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_1 + 1) -# define ASID_RESERVED_2 ((ASID_RESERVED_1 + 1) & ASID_MASK) -#else -# define ASID_RESERVED_2 ((ASID_RESERVED_1 + 2) & ASID_MASK) -#endif - -#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_2 + 1) -# define ASID_RESERVED_3 ((ASID_RESERVED_2 + 1) & ASID_MASK) -#else -# define ASID_RESERVED_3 ((ASID_RESERVED_2 + 2) & ASID_MASK) -#endif - -#if (XCHAL_MMU_ASID_INVALID != ASID_RESERVED_3 + 1) -# define ASID_FIRST_NONRESERVED ((ASID_RESERVED_3 + 1) & ASID_MASK) -#else -# define ASID_FIRST_NONRESERVED ((ASID_RESERVED_3 + 2) & ASID_MASK) -#endif - -#define ASID_ALL_RESERVED ( ((ASID_RESERVED_1) << 24) + \ - ((ASID_RESERVED_2) << 16) + \ - ((ASID_RESERVED_3) << 8) + \ - ((XCHAL_MMU_ASID_KERNEL)) ) - /* * NO_CONTEXT is the invalid ASID value that we don't ever assign to - * any user or kernel context. NO_CONTEXT is a better mnemonic than - * XCHAL_MMU_ASID_INVALID, so we use it in code instead. - */ - -#define NO_CONTEXT XCHAL_MMU_ASID_INVALID - -#if (KERNEL_RING != 0) -# error The KERNEL_RING really should be zero. -#endif - -#if (USER_RING >= XCHAL_MMU_RINGS) -# error USER_RING cannot be greater than the highest numbered ring. -#endif - -#if (USER_RING == KERNEL_RING) -# error The user and kernel rings really should not be equal. -#endif - -#if (USER_RING == 1) -#define ASID_INSERT(x) ( ((ASID_RESERVED_1) << 24) + \ - ((ASID_RESERVED_2) << 16) + \ - (((x) & (ASID_MASK)) << 8) + \ - ((XCHAL_MMU_ASID_KERNEL)) ) - -#elif (USER_RING == 2) -#define ASID_INSERT(x) ( ((ASID_RESERVED_1) << 24) + \ - (((x) & (ASID_MASK)) << 16) + \ - ((ASID_RESERVED_2) << 8) + \ - ((XCHAL_MMU_ASID_KERNEL)) ) - -#elif (USER_RING == 3) -#define ASID_INSERT(x) ( (((x) & (ASID_MASK)) << 24) + \ - ((ASID_RESERVED_1) << 16) + \ - ((ASID_RESERVED_2) << 8) + \ - ((XCHAL_MMU_ASID_KERNEL)) ) - -#else -#error Goofy value for USER_RING - -#endif /* USER_RING == 1 */ - - -/* - * All unused by hardware upper bits will be considered - * as a software asid extension. + * any user or kernel context. + * + * 0 invalid + * 1 kernel + * 2 reserved + * 3 reserved + * 4...255 available */ -#define ASID_VERSION_MASK ((unsigned long)~(ASID_MASK|(ASID_MASK-1))) -#define ASID_FIRST_VERSION \ - ((unsigned long)(~ASID_VERSION_MASK) + 1 + ASID_FIRST_NONRESERVED) +#define NO_CONTEXT 0 +#define ASID_USER_FIRST 4 +#define ASID_MASK ((1 << XCHAL_MMU_ASID_BITS) - 1) +#define ASID_INSERT(x) (0x03020001 | (((x) & ASID_MASK) << 8)) static inline void set_rasid_register (unsigned long val) { @@ -207,67 +52,28 @@ static inline void set_rasid_register (unsigned long val) static inline unsigned long get_rasid_register (void) { unsigned long tmp; - __asm__ __volatile__ (" rsr %0, "__stringify(RASID)"\n\t" : "=a" (tmp)); + __asm__ __volatile__ (" rsr %0,"__stringify(RASID)"\n\t" : "=a" (tmp)); return tmp; } - -#if ((XCHAL_MMU_ASID_INVALID == 0) && (XCHAL_MMU_ASID_KERNEL == 1)) - static inline void -get_new_mmu_context(struct mm_struct *mm, unsigned long asid) +__get_new_mmu_context(struct mm_struct *mm) { extern void flush_tlb_all(void); - if (! ((asid += ASID_INC) & ASID_MASK) ) { + if (! (++asid_cache & ASID_MASK) ) { flush_tlb_all(); /* start new asid cycle */ - if (!asid) /* fix version if needed */ - asid = ASID_FIRST_VERSION - ASID_FIRST_NONRESERVED; - asid += ASID_FIRST_NONRESERVED; + asid_cache += ASID_USER_FIRST; } - mm->context = asid_cache = asid; -} - -#else -#warning ASID_{INVALID,KERNEL} values impose non-optimal get_new_mmu_context implementation - -/* XCHAL_MMU_ASID_INVALID == 0 and XCHAL_MMU_ASID_KERNEL ==1 are - really the best, but if you insist... */ - -static inline int validate_asid (unsigned long asid) -{ - switch (asid) { - case XCHAL_MMU_ASID_INVALID: - case XCHAL_MMU_ASID_KERNEL: - case ASID_RESERVED_1: - case ASID_RESERVED_2: - case ASID_RESERVED_3: - return 0; /* can't use these values as ASIDs */ - } - return 1; /* valid */ + mm->context = asid_cache; } static inline void -get_new_mmu_context(struct mm_struct *mm, unsigned long asid) +__load_mmu_context(struct mm_struct *mm) { - extern void flush_tlb_all(void); - while (1) { - asid += ASID_INC; - if ( ! (asid & ASID_MASK) ) { - flush_tlb_all(); /* start new asid cycle */ - if (!asid) /* fix version if needed */ - asid = ASID_FIRST_VERSION - ASID_FIRST_NONRESERVED; - asid += ASID_FIRST_NONRESERVED; - break; /* no need to validate here */ - } - if (validate_asid (asid & ASID_MASK)) - break; - } - mm->context = asid_cache = asid; + set_rasid_register(ASID_INSERT(mm->context)); + invalidate_page_directory(); } -#endif - - /* * Initialize the context related info for a new mm_struct * instance. @@ -280,6 +86,20 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) return 0; } +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void +activate_mm(struct mm_struct *prev, struct mm_struct *next) +{ + /* Unconditionally get a new ASID. */ + + __get_new_mmu_context(next); + __load_mmu_context(next); +} + + static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { @@ -287,11 +107,10 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, /* Check if our ASID is of an older version and thus invalid */ - if ((next->context ^ asid) & ASID_VERSION_MASK) - get_new_mmu_context(next, asid); + if (next->context == NO_CONTEXT || ((next->context^asid) & ~ASID_MASK)) + __get_new_mmu_context(next); - set_rasid_register (ASID_INSERT(next->context)); - invalidate_page_directory(); + __load_mmu_context(next); } #define deactivate_mm(tsk, mm) do { } while(0) @@ -302,20 +121,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, */ static inline void destroy_context(struct mm_struct *mm) { - /* Nothing to do. */ -} - -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -static inline void -activate_mm(struct mm_struct *prev, struct mm_struct *next) -{ - /* Unconditionally get a new ASID. */ - - get_new_mmu_context(next, asid_cache); - set_rasid_register (ASID_INSERT(next->context)); invalidate_page_directory(); } diff --git a/include/asm-xtensa/page.h b/include/asm-xtensa/page.h index 40f4c6c3f58..c631d006194 100644 --- a/include/asm-xtensa/page.h +++ b/include/asm-xtensa/page.h @@ -15,18 +15,24 @@ #include <asm/processor.h> +#define XCHAL_KSEG_CACHED_VADDR 0xd0000000 +#define XCHAL_KSEG_BYPASS_VADDR 0xd8000000 +#define XCHAL_KSEG_PADDR 0x00000000 +#define XCHAL_KSEG_SIZE 0x08000000 + /* * PAGE_SHIFT determines the page size * PAGE_ALIGN(x) aligns the pointer to the (next) page boundary */ -#define PAGE_SHIFT XCHAL_MMU_MIN_PTE_PAGE_SIZE +#define PAGE_SHIFT 12 #define PAGE_SIZE (1 << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE - 1) & PAGE_MASK) -#define DCACHE_WAY_SIZE (XCHAL_DCACHE_SIZE / XCHAL_DCACHE_WAYS) #define PAGE_OFFSET XCHAL_KSEG_CACHED_VADDR +#define MAX_MEM_PFN XCHAL_KSEG_SIZE +#define PGTABLE_START 0x80000000 #ifdef __ASSEMBLY__ diff --git a/include/asm-xtensa/param.h b/include/asm-xtensa/param.h index c0eec8260b0..6f281392e3f 100644 --- a/include/asm-xtensa/param.h +++ b/include/asm-xtensa/param.h @@ -11,7 +11,7 @@ #ifndef _XTENSA_PARAM_H #define _XTENSA_PARAM_H -#include <xtensa/config/core.h> +#include <asm/variant/core.h> #ifdef __KERNEL__ # define HZ 100 /* internal timer frequency */ diff --git a/include/asm-xtensa/pgtable.h b/include/asm-xtensa/pgtable.h index b4318934b10..2d4b5db6ea6 100644 --- a/include/asm-xtensa/pgtable.h +++ b/include/asm-xtensa/pgtable.h @@ -14,45 +14,6 @@ #include <asm-generic/pgtable-nopmd.h> #include <asm/page.h> -/* Assertions. */ - -#ifdef CONFIG_MMU - - -#if (XCHAL_MMU_RINGS < 2) -# error Linux build assumes at least 2 ring levels. -#endif - -#if (XCHAL_MMU_CA_BITS != 4) -# error We assume exactly four bits for CA. -#endif - -#if (XCHAL_MMU_SR_BITS != 0) -# error We have no room for SR bits. -#endif - -/* - * Use the first min-wired way for mapping page-table pages. - * Page coloring requires a second min-wired way. - */ - -#if (XCHAL_DTLB_MINWIRED_SETS == 0) -# error Need a min-wired way for mapping page-table pages -#endif - -#define DTLB_WAY_PGTABLE XCHAL_DTLB_SET(XCHAL_DTLB_MINWIRED_SET0, WAY) - -#if (DCACHE_WAY_SIZE > PAGE_SIZE) && XCHAL_DCACHE_IS_WRITEBACK -# if XCHAL_DTLB_SET(XCHAL_DTLB_MINWIRED_SET0, WAYS) >= 2 -# define DTLB_WAY_DCACHE_ALIAS0 (DTLB_WAY_PGTABLE + 1) -# define DTLB_WAY_DCACHE_ALIAS1 (DTLB_WAY_PGTABLE + 2) -# else -# error Page coloring requires its own wired dtlb way! -# endif -#endif - -#endif /* CONFIG_MMU */ - /* * We only use two ring levels, user and kernel space. */ @@ -97,7 +58,7 @@ #define PGD_ORDER 0 #define PMD_ORDER 0 #define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) -#define FIRST_USER_ADDRESS XCHAL_SEG_MAPPABLE_VADDR +#define FIRST_USER_ADDRESS 0 #define FIRST_USER_PGD_NR (FIRST_USER_ADDRESS >> PGDIR_SHIFT) /* virtual memory area. We keep a distance to other memory regions to be diff --git a/include/asm-xtensa/platform-iss/hardware.h b/include/asm-xtensa/platform-iss/hardware.h index 22240f00180..6930c12adc1 100644 --- a/include/asm-xtensa/platform-iss/hardware.h +++ b/include/asm-xtensa/platform-iss/hardware.h @@ -12,18 +12,18 @@ * This file contains the default configuration of ISS. */ -#ifndef __ASM_XTENSA_ISS_HARDWARE -#define __ASM_XTENSA_ISS_HARDWARE +#ifndef _XTENSA_PLATFORM_ISS_HARDWARE_H +#define _XTENSA_PLATFORM_ISS_HARDWARE_H /* * Memory configuration. */ -#define PLATFORM_DEFAULT_MEM_START XSHAL_RAM_PADDR -#define PLATFORM_DEFAULT_MEM_SIZE XSHAL_RAM_VSIZE +#define PLATFORM_DEFAULT_MEM_START 0x00000000 +#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000 /* * Interrupt configuration. */ -#endif /* __ASM_XTENSA_ISS_HARDWARE */ +#endif /* _XTENSA_PLATFORM_ISS_HARDWARE_H */ diff --git a/include/asm-xtensa/platform-iss/simcall.h b/include/asm-xtensa/platform-iss/simcall.h new file mode 100644 index 00000000000..6acb572759a --- /dev/null +++ b/include/asm-xtensa/platform-iss/simcall.h @@ -0,0 +1,62 @@ +/* + * include/asm-xtensa/platform-iss/hardware.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Tensilica Inc. + */ + +#ifndef _XTENSA_PLATFORM_ISS_SIMCALL_H +#define _XTENSA_PLATFORM_ISS_SIMCALL_H + + +/* + * System call like services offered by the simulator host. + */ + +#define SYS_nop 0 /* unused */ +#define SYS_exit 1 /*x*/ +#define SYS_fork 2 +#define SYS_read 3 /*x*/ +#define SYS_write 4 /*x*/ +#define SYS_open 5 /*x*/ +#define SYS_close 6 /*x*/ +#define SYS_rename 7 /*x 38 - waitpid */ +#define SYS_creat 8 /*x*/ +#define SYS_link 9 /*x (not implemented on WIN32) */ +#define SYS_unlink 10 /*x*/ +#define SYS_execv 11 /* n/a - execve */ +#define SYS_execve 12 /* 11 - chdir */ +#define SYS_pipe 13 /* 42 - time */ +#define SYS_stat 14 /* 106 - mknod */ +#define SYS_chmod 15 +#define SYS_chown 16 /* 202 - lchown */ +#define SYS_utime 17 /* 30 - break */ +#define SYS_wait 18 /* n/a - oldstat */ +#define SYS_lseek 19 /*x*/ +#define SYS_getpid 20 +#define SYS_isatty 21 /* n/a - mount */ +#define SYS_fstat 22 /* 108 - oldumount */ +#define SYS_time 23 /* 13 - setuid */ +#define SYS_gettimeofday 24 /*x 78 - getuid (not implemented on WIN32) */ +#define SYS_times 25 /*X 43 - stime (Xtensa-specific implementation) */ +#define SYS_socket 26 +#define SYS_sendto 27 +#define SYS_recvfrom 28 +#define SYS_select_one 29 /* not compitible select, one file descriptor at the time */ +#define SYS_bind 30 +#define SYS_ioctl 31 + +/* + * SYS_select_one specifiers + */ + +#define XTISS_SELECT_ONE_READ 1 +#define XTISS_SELECT_ONE_WRITE 2 +#define XTISS_SELECT_ONE_EXCEPT 3 + + +#endif /* _XTENSA_PLATFORM_ISS_SIMCALL_H */ + diff --git a/include/asm-xtensa/posix_types.h b/include/asm-xtensa/posix_types.h index 2c816b0e776..3470b44c12c 100644 --- a/include/asm-xtensa/posix_types.h +++ b/include/asm-xtensa/posix_types.h @@ -21,7 +21,7 @@ typedef unsigned long __kernel_ino_t; typedef unsigned int __kernel_mode_t; -typedef unsigned short __kernel_nlink_t; +typedef unsigned long __kernel_nlink_t; typedef long __kernel_off_t; typedef int __kernel_pid_t; typedef unsigned short __kernel_ipc_pid_t; diff --git a/include/asm-xtensa/processor.h b/include/asm-xtensa/processor.h index 8b96e77c9d8..4feb9f7f35a 100644 --- a/include/asm-xtensa/processor.h +++ b/include/asm-xtensa/processor.h @@ -11,24 +11,18 @@ #ifndef _XTENSA_PROCESSOR_H #define _XTENSA_PROCESSOR_H -#ifdef __ASSEMBLY__ -#define _ASMLANGUAGE -#endif - -#include <xtensa/config/core.h> -#include <xtensa/config/specreg.h> -#include <xtensa/config/tie.h> -#include <xtensa/config/system.h> +#include <asm/variant/core.h> +#include <asm/coprocessor.h> #include <linux/compiler.h> #include <asm/ptrace.h> #include <asm/types.h> -#include <asm/coprocessor.h> +#include <asm/regs.h> /* Assertions. */ #if (XCHAL_HAVE_WINDOWED != 1) -#error Linux requires the Xtensa Windowed Registers Option. +# error Linux requires the Xtensa Windowed Registers Option. #endif /* @@ -145,11 +139,11 @@ struct thread_struct { * Note: We set-up ps as if we did a call4 to the new pc. * set_thread_state in signal.c depends on it. */ -#define USER_PS_VALUE ( (1 << XCHAL_PS_WOE_SHIFT) + \ - (1 << XCHAL_PS_CALLINC_SHIFT) + \ - (USER_RING << XCHAL_PS_RING_SHIFT) + \ - (1 << XCHAL_PS_PROGSTACK_SHIFT) + \ - (1 << XCHAL_PS_EXCM_SHIFT) ) +#define USER_PS_VALUE ((1 << PS_WOE_BIT) | \ + (1 << PS_CALLINC_SHIFT) | \ + (USER_RING << PS_RING_SHIFT) | \ + (1 << PS_UM_BIT) | \ + (1 << PS_EXCM_BIT)) /* Clearing a0 terminates the backtrace. */ #define start_thread(regs, new_pc, new_sp) \ diff --git a/include/asm-xtensa/ptrace.h b/include/asm-xtensa/ptrace.h index a5ac71a5205..1b7fe363fad 100644 --- a/include/asm-xtensa/ptrace.h +++ b/include/asm-xtensa/ptrace.h @@ -11,7 +11,7 @@ #ifndef _XTENSA_PTRACE_H #define _XTENSA_PTRACE_H -#include <xtensa/config/core.h> +#include <asm/variant/core.h> /* * Kernel stack diff --git a/include/asm-xtensa/regs.h b/include/asm-xtensa/regs.h new file mode 100644 index 00000000000..c913d259faa --- /dev/null +++ b/include/asm-xtensa/regs.h @@ -0,0 +1,138 @@ +/* + * Copyright (c) 2006 Tensilica, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2.1 of the GNU Lesser General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it would be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * Further, this software is distributed without any warranty that it is + * free of the rightful claim of any third person regarding infringement + * or the like. Any license provided herein, whether implied or + * otherwise, applies only to this software file. Patent licenses, if + * any, provided herein do not apply to combinations of this program with + * other software, or any other product whatsoever. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, write the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, + * USA. + */ + +#ifndef _XTENSA_REGS_H +#define _XTENSA_REGS_H + +/* Special registers. */ + +#define LBEG 0 +#define LEND 1 +#define LCOUNT 2 +#define SAR 3 +#define BR 4 +#define SCOMPARE1 12 +#define ACCHI 16 +#define ACCLO 17 +#define MR 32 +#define WINDOWBASE 72 +#define WINDOWSTART 73 +#define PTEVADDR 83 +#define RASID 90 +#define ITLBCFG 91 +#define DTLBCFG 92 +#define IBREAKENABLE 96 +#define DDR 104 +#define IBREAKA 128 +#define DBREAKA 144 +#define DBREAKC 160 +#define EPC 176 +#define EPC_1 177 +#define DEPC 192 +#define EPS 192 +#define EPS_1 193 +#define EXCSAVE 208 +#define EXCSAVE_1 209 +#define INTERRUPT 226 +#define INTENABLE 228 +#define PS 230 +#define THREADPTR 231 +#define EXCCAUSE 232 +#define DEBUGCAUSE 233 +#define CCOUNT 234 +#define PRID 235 +#define ICOUNT 236 +#define ICOUNTLEVEL 237 +#define EXCVADDR 238 +#define CCOMPARE 240 +#define MISC 244 + +/* Special names for read-only and write-only interrupt registers. */ + +#define INTREAD 226 +#define INTSET 226 +#define INTCLEAR 227 + +/* EXCCAUSE register fields */ + +#define EXCCAUSE_EXCCAUSE_SHIFT 0 +#define EXCCAUSE_EXCCAUSE_MASK 0x3F + +#define EXCCAUSE_ILLEGAL_INSTRUCTION 0 +#define EXCCAUSE_SYSTEM_CALL 1 +#define EXCCAUSE_INSTRUCTION_FETCH_ERROR 2 +#define EXCCAUSE_LOAD_STORE_ERROR 3 +#define EXCCAUSE_LEVEL1_INTERRUPT 4 +#define EXCCAUSE_ALLOCA 5 +#define EXCCAUSE_INTEGER_DIVIDE_BY_ZERO 6 +#define EXCCAUSE_SPECULATION 7 +#define EXCCAUSE_PRIVILEGED 8 +#define EXCCAUSE_UNALIGNED 9 +#define EXCCAUSE_ITLB_MISS 16 +#define EXCCAUSE_ITLB_MULTIHIT 17 +#define EXCCAUSE_ITLB_PRIVILEGE 18 +#define EXCCAUSE_ITLB_SIZE_RESTRICTION 19 +#define EXCCAUSE_FETCH_CACHE_ATTRIBUTE 20 +#define EXCCAUSE_DTLB_MISS 24 +#define EXCCAUSE_DTLB_MULTIHIT 25 +#define EXCCAUSE_DTLB_PRIVILEGE 26 +#define EXCCAUSE_DTLB_SIZE_RESTRICTION 27 +#define EXCCAUSE_LOAD_CACHE_ATTRIBUTE 28 +#define EXCCAUSE_STORE_CACHE_ATTRIBUTE 29 +#define EXCCAUSE_FLOATING_POINT 40 + +/* PS register fields. */ + +#define PS_WOE_BIT 18 +#define PS_CALLINC_SHIFT 16 +#define PS_CALLINC_MASK 0x00030000 +#define PS_OWB_SHIFT 8 +#define PS_OWB_MASK 0x00000F00 +#define PS_RING_SHIFT 6 +#define PS_RING_MASK 0x000000C0 +#define PS_UM_BIT 5 +#define PS_EXCM_BIT 4 +#define PS_INTLEVEL_SHIFT 0 +#define PS_INTLEVEL_MASK 0x0000000F + +/* DBREAKCn register fields. */ + +#define DBREAKC_MASK_BIT 0 +#define DBREAKC_MASK_MASK 0x0000003F +#define DBREAKC_LOAD_BIT 30 +#define DBREAKC_LOAD_MASK 0x40000000 +#define DBREAKC_STOR_BIT 31 +#define DBREAKC_STOR_MASK 0x80000000 + +/* DEBUGCAUSE register fields. */ + +#define DEBUGCAUSE_DEBUGINT_BIT 5 /* External debug interrupt */ +#define DEBUGCAUSE_BREAKN_BIT 4 /* BREAK.N instruction */ +#define DEBUGCAUSE_BREAK_BIT 3 /* BREAK instruction */ +#define DEBUGCAUSE_DBREAK_BIT 2 /* DBREAK match */ +#define DEBUGCAUSE_IBREAK_BIT 1 /* IBREAK match */ +#define DEBUGCAUSE_ICOUNT_BIT 0 /* ICOUNT would incr. to zero */ + +#endif /* _XTENSA_SPECREG_H */ + diff --git a/include/asm-xtensa/sembuf.h b/include/asm-xtensa/sembuf.h index 2d26c47666f..c15870493b3 100644 --- a/include/asm-xtensa/sembuf.h +++ b/include/asm-xtensa/sembuf.h @@ -25,7 +25,7 @@ struct semid64_ds { struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ -#if XCHAL_HAVE_LE +#ifdef __XTENSA_EL__ __kernel_time_t sem_otime; /* last semop time */ unsigned long __unused1; __kernel_time_t sem_ctime; /* last change time */ diff --git a/include/asm-xtensa/shmbuf.h b/include/asm-xtensa/shmbuf.h index a30b81a4b93..ad4b0121782 100644 --- a/include/asm-xtensa/shmbuf.h +++ b/include/asm-xtensa/shmbuf.h @@ -19,6 +19,7 @@ #ifndef _XTENSA_SHMBUF_H #define _XTENSA_SHMBUF_H +#if defined (__XTENSA_EL__) struct shmid64_ds { struct ipc64_perm shm_perm; /* operation perms */ size_t shm_segsz; /* size of segment (bytes) */ @@ -34,6 +35,26 @@ struct shmid64_ds { unsigned long __unused4; unsigned long __unused5; }; +#elif defined (__XTENSA_EB__) +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; +#else +# error endian order not defined +#endif + struct shminfo64 { unsigned long shmmax; diff --git a/include/asm-xtensa/stat.h b/include/asm-xtensa/stat.h index 2f4662ff6c3..149f4bce092 100644 --- a/include/asm-xtensa/stat.h +++ b/include/asm-xtensa/stat.h @@ -13,93 +13,57 @@ #include <linux/types.h> -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - #define STAT_HAVE_NSEC 1 struct stat { - unsigned short st_dev; - unsigned short __pad1; - unsigned long st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned short __pad2; - unsigned long st_size; - unsigned long st_blksize; - unsigned long st_blocks; - unsigned long st_atime; - unsigned long st_atime_nsec; - unsigned long st_mtime; - unsigned long st_mtime_nsec; - unsigned long st_ctime; - unsigned long st_ctime_nsec; - unsigned long __unused4; - unsigned long __unused5; + unsigned long st_dev; + ino_t st_ino; + mode_t st_mode; + nlink_t st_nlink; + uid_t st_uid; + gid_t st_gid; + unsigned int st_rdev; + off_t st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; }; -/* This matches struct stat64 in glibc-2.2.3. */ +/* This matches struct stat64 in glibc-2.3 */ struct stat64 { -#ifdef __XTENSA_EL__ - unsigned short st_dev; /* Device */ - unsigned char __pad0[10]; -#else - unsigned char __pad0[6]; - unsigned short st_dev; - unsigned char __pad1[2]; -#endif - -#define STAT64_HAS_BROKEN_ST_INO 1 - unsigned long __st_ino; /* 32bit file serial number. */ - + unsigned long long st_dev; /* Device */ + unsigned long long st_ino; /* File serial number */ unsigned int st_mode; /* File mode. */ unsigned int st_nlink; /* Link count. */ unsigned int st_uid; /* User ID of the file's owner. */ unsigned int st_gid; /* Group ID of the file's group. */ - -#ifdef __XTENSA_EL__ - unsigned short st_rdev; /* Device number, if device. */ - unsigned char __pad3[10]; -#else - unsigned char __pad2[6]; - unsigned short st_rdev; - unsigned char __pad3[2]; -#endif - - long long int st_size; /* Size of file, in bytes. */ - long int st_blksize; /* Optimal block size for I/O. */ - -#ifdef __XTENSA_EL__ - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - unsigned long __pad4; + unsigned long long st_rdev; /* Device number, if device. */ + long long st_size; /* Size of file, in bytes. */ + long st_blksize; /* Optimal block size for I/O. */ + unsigned long __unused2; +#ifdef __XTENSA_EB__ + unsigned long __unused3; + long st_blocks; /* Number 512-byte blocks allocated. */ #else - unsigned long __pad4; - unsigned long st_blocks; + long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __unused3; #endif - - unsigned long __pad5; - long int st_atime; /* Time of last access. */ - unsigned long st_atime_nsec; - long int st_mtime; /* Time of last modification. */ - unsigned long st_mtime_nsec; - long int st_ctime; /* Time of last status change. */ - unsigned long st_ctime_nsec; - unsigned long long int st_ino; /* File serial number. */ + long st_atime; /* Time of last access. */ + unsigned long st_atime_nsec; + long st_mtime; /* Time of last modification. */ + unsigned long st_mtime_nsec; + long st_ctime; /* Time of last status change. */ + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; }; #endif /* _XTENSA_STAT_H */ diff --git a/include/asm-xtensa/syscall.h b/include/asm-xtensa/syscall.h new file mode 100644 index 00000000000..6cb0d42f11c --- /dev/null +++ b/include/asm-xtensa/syscall.h @@ -0,0 +1,20 @@ +struct pt_regs; +struct sigaction; +asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*); +asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*); +asmlinkage long xtensa_pipe(int __user *); +asmlinkage long xtensa_mmap2(unsigned long, unsigned long, unsigned long, + unsigned long, unsigned long, unsigned long); +asmlinkage long xtensa_ptrace(long, long, long, long); +asmlinkage long xtensa_sigreturn(struct pt_regs*); +asmlinkage long xtensa_rt_sigreturn(struct pt_regs*); +asmlinkage long xtensa_sigsuspend(struct pt_regs*); +asmlinkage long xtensa_rt_sigsuspend(struct pt_regs*); +asmlinkage long xtensa_sigaction(int, const struct old_sigaction*, + struct old_sigaction*); +asmlinkage long xtensa_sigaltstack(struct pt_regs *regs); +asmlinkage long sys_rt_sigaction(int, + const struct sigaction __user *, + struct sigaction __user *, + size_t); +asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg); diff --git a/include/asm-xtensa/system.h b/include/asm-xtensa/system.h index 932bda92a21..4aaed7fe6cf 100644 --- a/include/asm-xtensa/system.h +++ b/include/asm-xtensa/system.h @@ -213,7 +213,7 @@ static inline void spill_registers(void) unsigned int a0, ps; __asm__ __volatile__ ( - "movi a14," __stringify (PS_EXCM_MASK) " | 1\n\t" + "movi a14," __stringify (PS_EXCM_BIT) " | 1\n\t" "mov a12, a0\n\t" "rsr a13," __stringify(SAR) "\n\t" "xsr a14," __stringify(PS) "\n\t" diff --git a/include/asm-xtensa/termbits.h b/include/asm-xtensa/termbits.h index c780593ff5f..057b9a3d8f8 100644 --- a/include/asm-xtensa/termbits.h +++ b/include/asm-xtensa/termbits.h @@ -30,6 +30,17 @@ struct termios { cc_t c_cc[NCCS]; /* control characters */ }; +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + /* c_cc characters */ #define VINTR 0 diff --git a/include/asm-xtensa/timex.h b/include/asm-xtensa/timex.h index c7b705e6665..28c7985a400 100644 --- a/include/asm-xtensa/timex.h +++ b/include/asm-xtensa/timex.h @@ -16,17 +16,22 @@ #include <asm/processor.h> #include <linux/stringify.h> -#if XCHAL_INT_LEVEL(XCHAL_TIMER0_INTERRUPT) == 1 +#define _INTLEVEL(x) XCHAL_INT ## x ## _LEVEL +#define INTLEVEL(x) _INTLEVEL(x) + +#if INTLEVEL(XCHAL_TIMER0_INTERRUPT) == 1 # define LINUX_TIMER 0 -#elif XCHAL_INT_LEVEL(XCHAL_TIMER1_INTERRUPT) == 1 +# define LINUX_TIMER_INT XCHAL_TIMER0_INTERRUPT +#elif INTLEVEL(XCHAL_TIMER1_INTERRUPT) == 1 # define LINUX_TIMER 1 -#elif XCHAL_INT_LEVEL(XCHAL_TIMER2_INTERRUPT) == 1 +# define LINUX_TIMER_INT XCHAL_TIMER1_INTERRUPT +#elif INTLEVEL(XCHAL_TIMER2_INTERRUPT) == 1 # define LINUX_TIMER 2 +# define LINUX_TIMER_INT XCHAL_TIMER2_INTERRUPT #else # error "Bad timer number for Linux configurations!" #endif -#define LINUX_TIMER_INT XCHAL_TIMER_INTERRUPT(LINUX_TIMER) #define LINUX_TIMER_MASK (1L << LINUX_TIMER_INT) #define CLOCK_TICK_RATE 1193180 /* (everyone is using this value) */ @@ -60,8 +65,8 @@ extern cycles_t cacheflush_time; #define WSR_CCOUNT(r) __asm__("wsr %0,"__stringify(CCOUNT) :: "a" (r)) #define RSR_CCOUNT(r) __asm__("rsr %0,"__stringify(CCOUNT) : "=a" (r)) -#define WSR_CCOMPARE(x,r) __asm__("wsr %0,"__stringify(CCOMPARE_0)"+"__stringify(x) :: "a"(r)) -#define RSR_CCOMPARE(x,r) __asm__("rsr %0,"__stringify(CCOMPARE_0)"+"__stringify(x) : "=a"(r)) +#define WSR_CCOMPARE(x,r) __asm__("wsr %0,"__stringify(CCOMPARE)"+"__stringify(x) :: "a"(r)) +#define RSR_CCOMPARE(x,r) __asm__("rsr %0,"__stringify(CCOMPARE)"+"__stringify(x) : "=a"(r)) static inline unsigned long get_ccount (void) { diff --git a/include/asm-xtensa/tlbflush.h b/include/asm-xtensa/tlbflush.h index 43f6ec859af..7c637b3c352 100644 --- a/include/asm-xtensa/tlbflush.h +++ b/include/asm-xtensa/tlbflush.h @@ -11,12 +11,20 @@ #ifndef _XTENSA_TLBFLUSH_H #define _XTENSA_TLBFLUSH_H -#define DEBUG_TLB - #ifdef __KERNEL__ -#include <asm/processor.h> #include <linux/stringify.h> +#include <asm/processor.h> + +#define DTLB_WAY_PGD 7 + +#define ITLB_ARF_WAYS 4 +#define DTLB_ARF_WAYS 4 + +#define ITLB_HIT_BIT 3 +#define DTLB_HIT_BIT 4 + +#ifndef __ASSEMBLY__ /* TLB flushing: * @@ -46,11 +54,6 @@ static inline void flush_tlb_pgtables(struct mm_struct *mm, /* TLB operations. */ -#define ITLB_WAYS_LOG2 XCHAL_ITLB_WAY_BITS -#define DTLB_WAYS_LOG2 XCHAL_DTLB_WAY_BITS -#define ITLB_PROBE_SUCCESS (1 << ITLB_WAYS_LOG2) -#define DTLB_PROBE_SUCCESS (1 << DTLB_WAYS_LOG2) - static inline unsigned long itlb_probe(unsigned long addr) { unsigned long tmp; @@ -131,29 +134,30 @@ static inline void write_itlb_entry (pte_t entry, int way) static inline void invalidate_page_directory (void) { - invalidate_dtlb_entry (DTLB_WAY_PGTABLE); + invalidate_dtlb_entry (DTLB_WAY_PGD); + invalidate_dtlb_entry (DTLB_WAY_PGD+1); + invalidate_dtlb_entry (DTLB_WAY_PGD+2); } static inline void invalidate_itlb_mapping (unsigned address) { unsigned long tlb_entry; - while ((tlb_entry = itlb_probe (address)) & ITLB_PROBE_SUCCESS) - invalidate_itlb_entry (tlb_entry); + if (((tlb_entry = itlb_probe(address)) & (1 << ITLB_HIT_BIT)) != 0) + invalidate_itlb_entry(tlb_entry); } static inline void invalidate_dtlb_mapping (unsigned address) { unsigned long tlb_entry; - while ((tlb_entry = dtlb_probe (address)) & DTLB_PROBE_SUCCESS) - invalidate_dtlb_entry (tlb_entry); + if (((tlb_entry = dtlb_probe(address)) & (1 << DTLB_HIT_BIT)) != 0) + invalidate_dtlb_entry(tlb_entry); } #define check_pgt_cache() do { } while (0) -#ifdef DEBUG_TLB - -/* DO NOT USE THESE FUNCTIONS. These instructions aren't part of the Xtensa +/* + * DO NOT USE THESE FUNCTIONS. These instructions aren't part of the Xtensa * ISA and exist only for test purposes.. * You may find it helpful for MMU debugging, however. * @@ -193,8 +197,6 @@ static inline unsigned long read_itlb_translation (int way) return tmp; } -#endif /* DEBUG_TLB */ - - +#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ -#endif /* _XTENSA_PGALLOC_H */ +#endif /* _XTENSA_TLBFLUSH_H */ diff --git a/include/asm-xtensa/uaccess.h b/include/asm-xtensa/uaccess.h index 88a64e1144d..d6352da05b1 100644 --- a/include/asm-xtensa/uaccess.h +++ b/include/asm-xtensa/uaccess.h @@ -23,7 +23,6 @@ #ifdef __ASSEMBLY__ -#define _ASMLANGUAGE #include <asm/current.h> #include <asm/asm-offsets.h> #include <asm/processor.h> diff --git a/include/asm-xtensa/unistd.h b/include/asm-xtensa/unistd.h index 2e1a1b997e7..8a7fb6964ce 100644 --- a/include/asm-xtensa/unistd.h +++ b/include/asm-xtensa/unistd.h @@ -11,212 +11,593 @@ #ifndef _XTENSA_UNISTD_H #define _XTENSA_UNISTD_H -#define __NR_spill 0 -#define __NR_exit 1 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_ptrace 26 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -#define __NR_profil 98 -#define __NR_statfs 99 -#define __NR_fstatfs 100 -#define __NR_ioperm 101 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -#define __NR_iopl 110 -#define __NR_vhangup 111 -#define __NR_idle 112 -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -#define __NR_modify_ldt 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_cacheflush 147 -#define __NR_cachectl 148 -#define __NR_sysxtensa 149 -#define __NR_sysdummy 150 -#define __NR_getsid 151 -#define __NR_fdatasync 152 -#define __NR__sysctl 153 -#define __NR_mlock 154 -#define __NR_munlock 155 -#define __NR_mlockall 156 -#define __NR_munlockall 157 -#define __NR_sched_setparam 158 -#define __NR_sched_getparam 159 -#define __NR_sched_setscheduler 160 -#define __NR_sched_getscheduler 161 -#define __NR_sched_yield 162 -#define __NR_sched_get_priority_max 163 -#define __NR_sched_get_priority_min 164 -#define __NR_sched_rr_get_interval 165 -#define __NR_nanosleep 166 -#define __NR_mremap 167 -#define __NR_accept 168 -#define __NR_bind 169 -#define __NR_connect 170 -#define __NR_getpeername 171 -#define __NR_getsockname 172 -#define __NR_getsockopt 173 -#define __NR_listen 174 -#define __NR_recv 175 -#define __NR_recvfrom 176 -#define __NR_recvmsg 177 -#define __NR_send 178 -#define __NR_sendmsg 179 -#define __NR_sendto 180 -#define __NR_setsockopt 181 -#define __NR_shutdown 182 -#define __NR_socket 183 -#define __NR_socketpair 184 -#define __NR_setresuid 185 -#define __NR_getresuid 186 -#define __NR_query_module 187 -#define __NR_poll 188 -#define __NR_nfsservctl 189 -#define __NR_setresgid 190 -#define __NR_getresgid 191 -#define __NR_prctl 192 -#define __NR_rt_sigreturn 193 -#define __NR_rt_sigaction 194 -#define __NR_rt_sigprocmask 195 -#define __NR_rt_sigpending 196 -#define __NR_rt_sigtimedwait 197 -#define __NR_rt_sigqueueinfo 198 -#define __NR_rt_sigsuspend 199 -#define __NR_pread 200 -#define __NR_pwrite 201 -#define __NR_chown 202 -#define __NR_getcwd 203 -#define __NR_capget 204 -#define __NR_capset 205 -#define __NR_sigaltstack 206 -#define __NR_sendfile 207 -#define __NR_mmap2 210 -#define __NR_truncate64 211 -#define __NR_ftruncate64 212 -#define __NR_stat64 213 -#define __NR_lstat64 214 -#define __NR_fstat64 215 -#define __NR_pivot_root 216 -#define __NR_mincore 217 -#define __NR_madvise 218 -#define __NR_getdents64 219 - -/* Keep this last; should always equal the last valid call number. */ -#define __NR_Linux_syscalls 220 - -/* user-visible error numbers are in the range -1 - -125: see - * <asm-xtensa/errno.h> */ - -#define SYSXTENSA_RESERVED 0 /* don't use this */ -#define SYSXTENSA_ATOMIC_SET 1 /* set variable */ -#define SYSXTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */ -#define SYSXTENSA_ATOMIC_ADD 3 /* add to memory */ -#define SYSXTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */ - -#define SYSXTENSA_COUNT 5 /* count of syscall0 functions*/ +#ifndef __SYSCALL +# define __SYSCALL(nr,func,nargs) +#endif + +#define __NR_spill 0 +__SYSCALL( 0, sys_ni_syscall, 0) +#define __NR_xtensa 1 +__SYSCALL( 1, sys_ni_syscall, 0) +#define __NR_available4 2 +__SYSCALL( 2, sys_ni_syscall, 0) +#define __NR_available5 3 +__SYSCALL( 3, sys_ni_syscall, 0) +#define __NR_available6 4 +__SYSCALL( 4, sys_ni_syscall, 0) +#define __NR_available7 5 +__SYSCALL( 5, sys_ni_syscall, 0) +#define __NR_available8 6 +__SYSCALL( 6, sys_ni_syscall, 0) +#define __NR_available9 7 +__SYSCALL( 7, sys_ni_syscall, 0) + +/* File Operations */ + +#define __NR_open 8 +__SYSCALL( 8, sys_open, 3) +#define __NR_close 9 +__SYSCALL( 9, sys_close, 1) +#define __NR_dup 10 +__SYSCALL( 10, sys_dup, 1) +#define __NR_dup2 11 +__SYSCALL( 11, sys_dup2, 2) +#define __NR_read 12 +__SYSCALL( 12, sys_read, 3) +#define __NR_write 13 +__SYSCALL( 13, sys_write, 3) +#define __NR_select 14 +__SYSCALL( 14, sys_select, 5) +#define __NR_lseek 15 +__SYSCALL( 15, sys_lseek, 3) +#define __NR_poll 16 +__SYSCALL( 16, sys_poll, 3) +#define __NR__llseek 17 +__SYSCALL( 17, sys_llseek, 5) +#define __NR_epoll_wait 18 +__SYSCALL( 18, sys_epoll_wait, 4) +#define __NR_epoll_ctl 19 +__SYSCALL( 19, sys_epoll_ctl, 4) +#define __NR_epoll_create 20 +__SYSCALL( 20, sys_epoll_create, 1) +#define __NR_creat 21 +__SYSCALL( 21, sys_creat, 2) +#define __NR_truncate 22 +__SYSCALL( 22, sys_truncate, 2) +#define __NR_ftruncate 23 +__SYSCALL( 23, sys_ftruncate, 2) +#define __NR_readv 24 +__SYSCALL( 24, sys_readv, 3) +#define __NR_writev 25 +__SYSCALL( 25, sys_writev, 3) +#define __NR_fsync 26 +__SYSCALL( 26, sys_fsync, 1) +#define __NR_fdatasync 27 +__SYSCALL( 27, sys_fdatasync, 1) +#define __NR_truncate64 28 +__SYSCALL( 28, sys_truncate64, 2) +#define __NR_ftruncate64 29 +__SYSCALL( 29, sys_ftruncate64, 2) +#define __NR_pread64 30 +__SYSCALL( 30, sys_pread64, 6) +#define __NR_pwrite64 31 +__SYSCALL( 31, sys_pwrite64, 6) + +#define __NR_link 32 +__SYSCALL( 32, sys_link, 2) +#define __NR_rename 33 +__SYSCALL( 33, sys_rename, 2) +#define __NR_symlink 34 +__SYSCALL( 34, sys_symlink, 2) +#define __NR_readlink 35 +__SYSCALL( 35, sys_readlink, 3) +#define __NR_mknod 36 +__SYSCALL( 36, sys_mknod, 3) +#define __NR_pipe 37 +__SYSCALL( 37, xtensa_pipe, 1) +#define __NR_unlink 38 +__SYSCALL( 38, sys_unlink, 1) +#define __NR_rmdir 39 +__SYSCALL( 39, sys_rmdir, 1) + +#define __NR_mkdir 40 +__SYSCALL( 40, sys_mkdir, 2) +#define __NR_chdir 41 +__SYSCALL( 41, sys_chdir, 1) +#define __NR_fchdir 42 +__SYSCALL( 42, sys_fchdir, 1) +#define __NR_getcwd 43 +__SYSCALL( 43, sys_getcwd, 2) + +#define __NR_chmod 44 +__SYSCALL( 44, sys_chmod, 2) +#define __NR_chown 45 +__SYSCALL( 45, sys_chown, 3) +#define __NR_stat 46 +__SYSCALL( 46, sys_newstat, 2) +#define __NR_stat64 47 +__SYSCALL( 47, sys_stat64, 2) + +#define __NR_lchown 48 +__SYSCALL( 48, sys_lchown, 3) +#define __NR_lstat 49 +__SYSCALL( 49, sys_newlstat, 2) +#define __NR_lstat64 50 +__SYSCALL( 50, sys_lstat64, 2) +#define __NR_available51 51 +__SYSCALL( 51, sys_ni_syscall, 0) + +#define __NR_fchmod 52 +__SYSCALL( 52, sys_fchmod, 2) +#define __NR_fchown 53 +__SYSCALL( 53, sys_fchown, 3) +#define __NR_fstat 54 +__SYSCALL( 54, sys_newfstat, 2) +#define __NR_fstat64 55 +__SYSCALL( 55, sys_fstat64, 2) + +#define __NR_flock 56 +__SYSCALL( 56, sys_flock, 2) +#define __NR_access 57 +__SYSCALL( 57, sys_access, 2) +#define __NR_umask 58 +__SYSCALL( 58, sys_umask, 1) +#define __NR_getdents 59 +__SYSCALL( 59, sys_getdents, 3) +#define __NR_getdents64 60 +__SYSCALL( 60, sys_getdents64, 3) +#define __NR_fcntl64 61 +__SYSCALL( 61, sys_fcntl64, 3) +#define __NR_available62 62 +__SYSCALL( 62, sys_ni_syscall, 0) +#define __NR_fadvise64_64 63 +__SYSCALL( 63, sys_fadvise64_64, 6) +#define __NR_utime 64 /* glibc 2.3.3 ?? */ +__SYSCALL( 64, sys_utime, 2) +#define __NR_utimes 65 +__SYSCALL( 65, sys_utimes, 2) +#define __NR_ioctl 66 +__SYSCALL( 66, sys_ioctl, 3) +#define __NR_fcntl 67 +__SYSCALL( 67, sys_fcntl, 3) + +#define __NR_setxattr 68 +__SYSCALL( 68, sys_setxattr, 5) +#define __NR_getxattr 69 +__SYSCALL( 69, sys_getxattr, 4) +#define __NR_listxattr 70 +__SYSCALL( 70, sys_listxattr, 3) +#define __NR_removexattr 71 +__SYSCALL( 71, sys_removexattr, 2) +#define __NR_lsetxattr 72 +__SYSCALL( 72, sys_lsetxattr, 5) +#define __NR_lgetxattr 73 +__SYSCALL( 73, sys_lgetxattr, 4) +#define __NR_llistxattr 74 +__SYSCALL( 74, sys_llistxattr, 3) +#define __NR_lremovexattr 75 +__SYSCALL( 75, sys_lremovexattr, 2) +#define __NR_fsetxattr 76 +__SYSCALL( 76, sys_fsetxattr, 5) +#define __NR_fgetxattr 77 +__SYSCALL( 77, sys_fgetxattr, 4) +#define __NR_flistxattr 78 +__SYSCALL( 78, sys_flistxattr, 3) +#define __NR_fremovexattr 79 +__SYSCALL( 79, sys_fremovexattr, 2) + +/* File Map / Shared Memory Operations */ + +#define __NR_mmap2 80 +__SYSCALL( 80, xtensa_mmap2, 6) +#define __NR_munmap 81 +__SYSCALL( 81, sys_munmap, 2) +#define __NR_mprotect 82 +__SYSCALL( 82, sys_mprotect, 3) +#define __NR_brk 83 +__SYSCALL( 83, sys_brk, 1) +#define __NR_mlock 84 +__SYSCALL( 84, sys_mlock, 2) +#define __NR_munlock 85 +__SYSCALL( 85, sys_munlock, 2) +#define __NR_mlockall 86 +__SYSCALL( 86, sys_mlockall, 1) +#define __NR_munlockall 87 +__SYSCALL( 87, sys_munlockall, 0) +#define __NR_mremap 88 +__SYSCALL( 88, sys_mremap, 4) +#define __NR_msync 89 +__SYSCALL( 89, sys_msync, 3) +#define __NR_mincore 90 +__SYSCALL( 90, sys_mincore, 3) +#define __NR_madvise 91 +__SYSCALL( 91, sys_madvise, 3) +#define __NR_shmget 92 +__SYSCALL( 92, sys_shmget, 4) +#define __NR_shmat 93 +__SYSCALL( 93, xtensa_shmat, 4) +#define __NR_shmctl 94 +__SYSCALL( 94, sys_shmctl, 4) +#define __NR_shmdt 95 +__SYSCALL( 95, sys_shmdt, 4) + +/* Socket Operations */ + +#define __NR_socket 96 +__SYSCALL( 96, sys_socket, 3) +#define __NR_setsockopt 97 +__SYSCALL( 97, sys_setsockopt, 5) +#define __NR_getsockopt 98 +__SYSCALL( 98, sys_getsockopt, 5) +#define __NR_shutdown 99 +__SYSCALL( 99, sys_shutdown, 2) + +#define __NR_bind 100 +__SYSCALL(100, sys_bind, 3) +#define __NR_connect 101 +__SYSCALL(101, sys_connect, 3) +#define __NR_listen 102 +__SYSCALL(102, sys_listen, 2) +#define __NR_accept 103 +__SYSCALL(103, sys_accept, 3) + +#define __NR_getsockname 104 +__SYSCALL(104, sys_getsockname, 3) +#define __NR_getpeername 105 +__SYSCALL(105, sys_getpeername, 3) +#define __NR_sendmsg 106 +__SYSCALL(106, sys_sendmsg, 3) +#define __NR_recvmsg 107 +__SYSCALL(107, sys_recvmsg, 3) +#define __NR_send 108 +__SYSCALL(108, sys_send, 4) +#define __NR_recv 109 +__SYSCALL(109, sys_recv, 4) +#define __NR_sendto 110 +__SYSCALL(110, sys_sendto, 6) +#define __NR_recvfrom 111 +__SYSCALL(111, sys_recvfrom, 6) + +#define __NR_socketpair 112 +__SYSCALL(112, sys_socketpair, 4) +#define __NR_sendfile 113 +__SYSCALL(113, sys_sendfile, 4) +#define __NR_sendfile64 114 +__SYSCALL(114, sys_sendfile64, 4) +#define __NR_available115 115 +__SYSCALL(115, sys_ni_syscall, 0) + +/* Process Operations */ + +#define __NR_clone 116 +__SYSCALL(116, xtensa_clone, 5) +#define __NR_execve 117 +__SYSCALL(117, xtensa_execve, 3) +#define __NR_exit 118 +__SYSCALL(118, sys_exit, 1) +#define __NR_exit_group 119 +__SYSCALL(119, sys_exit_group, 1) +#define __NR_getpid 120 +__SYSCALL(120, sys_getpid, 0) +#define __NR_wait4 121 +__SYSCALL(121, sys_wait4, 4) +#define __NR_waitid 122 +__SYSCALL(122, sys_waitid, 5) +#define __NR_kill 123 +__SYSCALL(123, sys_kill, 2) +#define __NR_tkill 124 +__SYSCALL(124, sys_tkill, 2) +#define __NR_tgkill 125 +__SYSCALL(125, sys_tgkill, 3) +#define __NR_set_tid_address 126 +__SYSCALL(126, sys_set_tid_address, 1) +#define __NR_gettid 127 +__SYSCALL(127, sys_gettid, 0) +#define __NR_setsid 128 +__SYSCALL(128, sys_setsid, 0) +#define __NR_getsid 129 +__SYSCALL(129, sys_getsid, 1) +#define __NR_prctl 130 +__SYSCALL(130, sys_prctl, 5) +#define __NR_personality 131 +__SYSCALL(131, sys_personality, 1) +#define __NR_getpriority 132 +__SYSCALL(132, sys_getpriority, 2) +#define __NR_setpriority 133 +__SYSCALL(133, sys_setpriority, 3) +#define __NR_setitimer 134 +__SYSCALL(134, sys_setitimer, 3) +#define __NR_getitimer 135 +__SYSCALL(135, sys_getitimer, 2) +#define __NR_setuid 136 +__SYSCALL(136, sys_setuid, 1) +#define __NR_getuid 137 +__SYSCALL(137, sys_getuid, 0) +#define __NR_setgid 138 +__SYSCALL(138, sys_setgid, 1) +#define __NR_getgid 139 +__SYSCALL(139, sys_getgid, 0) +#define __NR_geteuid 140 +__SYSCALL(140, sys_geteuid, 0) +#define __NR_getegid 141 +__SYSCALL(141, sys_getegid, 0) +#define __NR_setreuid 142 +__SYSCALL(142, sys_setreuid, 2) +#define __NR_setregid 143 +__SYSCALL(143, sys_setregid, 2) +#define __NR_setresuid 144 +__SYSCALL(144, sys_setresuid, 3) +#define __NR_getresuid 145 +__SYSCALL(145, sys_getresuid, 3) +#define __NR_setresgid 146 +__SYSCALL(146, sys_setresgid, 3) +#define __NR_getresgid 147 +__SYSCALL(147, sys_getresgid, 3) +#define __NR_setpgid 148 +__SYSCALL(148, sys_setpgid, 2) +#define __NR_getpgid 149 +__SYSCALL(149, sys_getpgid, 1) +#define __NR_getppid 150 +__SYSCALL(150, sys_getppid, 0) +#define __NR_available151 151 +__SYSCALL(151, sys_ni_syscall, 0) + +#define __NR_reserved152 152 /* set_thread_area */ +__SYSCALL(152, sys_ni_syscall, 0) +#define __NR_reserved153 153 /* get_thread_area */ +__SYSCALL(153, sys_ni_syscall, 0) +#define __NR_times 154 +__SYSCALL(154, sys_times, 1) +#define __NR_acct 155 +__SYSCALL(155, sys_acct, 1) +#define __NR_sched_setaffinity 156 +__SYSCALL(156, sys_sched_setaffinity, 3) +#define __NR_sched_getaffinity 157 +__SYSCALL(157, sys_sched_getaffinity, 3) +#define __NR_capget 158 +__SYSCALL(158, sys_capget, 2) +#define __NR_capset 159 +__SYSCALL(159, sys_capset, 2) +#define __NR_ptrace 160 +__SYSCALL(160, sys_ptrace, 4) +#define __NR_semtimedop 161 +__SYSCALL(161, sys_semtimedop, 5) +#define __NR_semget 162 +__SYSCALL(162, sys_semget, 4) +#define __NR_semop 163 +__SYSCALL(163, sys_semop, 4) +#define __NR_semctl 164 +__SYSCALL(164, sys_semctl, 4) +#define __NR_available165 165 +__SYSCALL(165, sys_ni_syscall, 0) +#define __NR_msgget 166 +__SYSCALL(166, sys_msgget, 4) +#define __NR_msgsnd 167 +__SYSCALL(167, sys_msgsnd, 4) +#define __NR_msgrcv 168 +__SYSCALL(168, sys_msgrcv, 4) +#define __NR_msgctl 169 +__SYSCALL(169, sys_msgctl, 4) +#define __NR_available170 170 +__SYSCALL(170, sys_ni_syscall, 0) +#define __NR_available171 171 +__SYSCALL(171, sys_ni_syscall, 0) + +/* File System */ + +#define __NR_mount 172 +__SYSCALL(172, sys_mount, 5) +#define __NR_swapon 173 +__SYSCALL(173, sys_swapon, 2) +#define __NR_chroot 174 +__SYSCALL(174, sys_chroot, 1) +#define __NR_pivot_root 175 +__SYSCALL(175, sys_pivot_root, 2) +#define __NR_umount 176 +__SYSCALL(176, sys_umount, 2) +#define __NR_swapoff 177 +__SYSCALL(177, sys_swapoff, 1) +#define __NR_sync 178 +__SYSCALL(178, sys_sync, 0) +#define __NR_available179 179 +__SYSCALL(179, sys_ni_syscall, 0) +#define __NR_setfsuid 180 +__SYSCALL(180, sys_setfsuid, 1) +#define __NR_setfsgid 181 +__SYSCALL(181, sys_setfsgid, 1) +#define __NR_sysfs 182 +__SYSCALL(182, sys_sysfs, 3) +#define __NR_ustat 183 +__SYSCALL(183, sys_ustat, 2) +#define __NR_statfs 184 +__SYSCALL(184, sys_statfs, 2) +#define __NR_fstatfs 185 +__SYSCALL(185, sys_fstatfs, 2) +#define __NR_statfs64 186 +__SYSCALL(186, sys_statfs64, 3) +#define __NR_fstatfs64 187 +__SYSCALL(187, sys_fstatfs64, 3) + +/* System */ + +#define __NR_setrlimit 188 +__SYSCALL(188, sys_setrlimit, 2) +#define __NR_getrlimit 189 +__SYSCALL(189, sys_getrlimit, 2) +#define __NR_getrusage 190 +__SYSCALL(190, sys_getrusage, 2) +#define __NR_futex 191 +__SYSCALL(191, sys_futex, 5) +#define __NR_gettimeofday 192 +__SYSCALL(192, sys_gettimeofday, 2) +#define __NR_settimeofday 193 +__SYSCALL(193, sys_settimeofday, 2) +#define __NR_adjtimex 194 +__SYSCALL(194, sys_adjtimex, 1) +#define __NR_nanosleep 195 +__SYSCALL(195, sys_nanosleep, 2) +#define __NR_getgroups 196 +__SYSCALL(196, sys_getgroups, 2) +#define __NR_setgroups 197 +__SYSCALL(197, sys_setgroups, 2) +#define __NR_sethostname 198 +__SYSCALL(198, sys_sethostname, 2) +#define __NR_setdomainname 199 +__SYSCALL(199, sys_setdomainname, 2) +#define __NR_syslog 200 +__SYSCALL(200, sys_syslog, 3) +#define __NR_vhangup 201 +__SYSCALL(201, sys_vhangup, 0) +#define __NR_uselib 202 +__SYSCALL(202, sys_uselib, 1) +#define __NR_reboot 203 +__SYSCALL(203, sys_reboot, 3) +#define __NR_quotactl 204 +__SYSCALL(204, sys_quotactl, 4) +#define __NR_nfsservctl 205 +__SYSCALL(205, sys_nfsservctl, 3) +#define __NR__sysctl 206 +__SYSCALL(206, sys_sysctl, 1) +#define __NR_bdflush 207 +__SYSCALL(207, sys_bdflush, 2) +#define __NR_uname 208 +__SYSCALL(208, sys_newuname, 1) +#define __NR_sysinfo 209 +__SYSCALL(209, sys_sysinfo, 1) +#define __NR_init_module 210 +__SYSCALL(210, sys_init_module, 2) +#define __NR_delete_module 211 +__SYSCALL(211, sys_delete_module, 1) + +#define __NR_sched_setparam 212 +__SYSCALL(212, sys_sched_setparam, 2) +#define __NR_sched_getparam 213 +__SYSCALL(213, sys_sched_getparam, 2) +#define __NR_sched_setscheduler 214 +__SYSCALL(214, sys_sched_setscheduler, 3) +#define __NR_sched_getscheduler 215 +__SYSCALL(215, sys_sched_getscheduler, 1) +#define __NR_sched_get_priority_max 216 +__SYSCALL(216, sys_sched_get_priority_max, 1) +#define __NR_sched_get_priority_min 217 +__SYSCALL(217, sys_sched_get_priority_min, 1) +#define __NR_sched_rr_get_interval 218 +__SYSCALL(218, sys_sched_rr_get_interval, 2) +#define __NR_sched_yield 219 +__SYSCALL(219, sys_sched_yield, 0) +#define __NR_sigreturn 222 +__SYSCALL(222, xtensa_sigreturn, 0) + +/* Signal Handling */ + +#define __NR_restart_syscall 223 +__SYSCALL(223, sys_restart_syscall, 0) +#define __NR_sigaltstack 224 +__SYSCALL(224, xtensa_sigaltstack, 2) +#define __NR_rt_sigreturn 225 +__SYSCALL(225, xtensa_rt_sigreturn, 1) +#define __NR_rt_sigaction 226 +__SYSCALL(226, sys_rt_sigaction, 4) +#define __NR_rt_sigprocmask 227 +__SYSCALL(227, sys_rt_sigprocmask, 4) +#define __NR_rt_sigpending 228 +__SYSCALL(228, sys_rt_sigpending, 2) +#define __NR_rt_sigtimedwait 229 +__SYSCALL(229, sys_rt_sigtimedwait, 4) +#define __NR_rt_sigqueueinfo 230 +__SYSCALL(230, sys_rt_sigqueueinfo, 3) +#define __NR_rt_sigsuspend 231 +__SYSCALL(231, xtensa_rt_sigsuspend, 2) + +/* Message */ + +#define __NR_mq_open 232 +__SYSCALL(232, sys_mq_open, 4) +#define __NR_mq_unlink 233 +__SYSCALL(233, sys_mq_unlink, 1) +#define __NR_mq_timedsend 234 +__SYSCALL(234, sys_mq_timedsend, 5) +#define __NR_mq_timedreceive 235 +__SYSCALL(235, sys_mq_timedreceive, 5) +#define __NR_mq_notify 236 +__SYSCALL(236, sys_mq_notify, 2) +#define __NR_mq_getsetattr 237 +__SYSCALL(237, sys_mq_getsetattr, 3) +#define __NR_available238 238 +__SYSCALL(238, sys_ni_syscall, 0) + +/* IO */ + +#define __NR_io_setup 239 +__SYSCALL(239, sys_io_setup, 2) +#define __NR_io_destroy 240 +__SYSCALL(240, sys_io_destroy, 1) +#define __NR_io_submit 241 +__SYSCALL(241, sys_io_submit, 3) +#define __NR_io_getevents 242 +__SYSCALL(242, sys_io_getevents, 5) +#define __NR_io_cancel 243 +__SYSCALL(243, sys_io_cancel, 3) +#define __NR_clock_settime 244 +__SYSCALL(244, sys_clock_settime, 2) +#define __NR_clock_gettime 245 +__SYSCALL(245, sys_clock_gettime, 2) +#define __NR_clock_getres 246 +__SYSCALL(246, sys_clock_getres, 2) +#define __NR_clock_nanosleep 247 +__SYSCALL(247, sys_clock_nanosleep, 4) + +/* Timer */ + +#define __NR_timer_create 248 +__SYSCALL(248, sys_timer_create, 3) +#define __NR_timer_delete 249 +__SYSCALL(249, sys_timer_delete, 1) +#define __NR_timer_settime 250 +__SYSCALL(250, sys_timer_settime, 4) +#define __NR_timer_gettime 251 +__SYSCALL(251, sys_timer_gettime, 2) +#define __NR_timer_getoverrun 252 +__SYSCALL(252, sys_timer_getoverrun, 1) + +/* System */ + +#define __NR_reserved244 253 +__SYSCALL(253, sys_ni_syscall, 0) +#define __NR_lookup_dcookie 254 +__SYSCALL(254, sys_lookup_dcookie, 4) +#define __NR_available255 255 +__SYSCALL(255, sys_ni_syscall, 0) +#define __NR_add_key 256 +__SYSCALL(256, sys_add_key, 5) +#define __NR_request_key 257 +__SYSCALL(257, sys_request_key, 5) +#define __NR_keyctl 258 +__SYSCALL(258, sys_keyctl, 5) +#define __NR_available259 259 +__SYSCALL(259, sys_ni_syscall, 0) + +#define __NR_syscall_count 261 + +/* + * sysxtensa syscall handler + * + * int sysxtensa (SYS_XTENSA_ATOMIC_SET, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_ADD, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_EXG_ADD, ptr, val, unused); + * int sysxtensa (SYS_XTENSA_ATOMIC_CMP_SWP, ptr, oldval, newval); + * a2 a6 a3 a4 a5 + */ + +#define SYS_XTENSA_RESERVED 0 /* don't use this */ +#define SYS_XTENSA_ATOMIC_SET 1 /* set variable */ +#define SYS_XTENSA_ATOMIC_EXG_ADD 2 /* exchange memory and add */ +#define SYS_XTENSA_ATOMIC_ADD 3 /* add to memory */ +#define SYS_XTENSA_ATOMIC_CMP_SWP 4 /* compare and swap */ + +#define SYS_XTENSA_COUNT 5 /* count */ + +#ifdef __KERNEL__ /* * "Conditional" syscalls @@ -230,6 +611,9 @@ #define __ARCH_WANT_SYS_UTIME #define __ARCH_WANT_SYS_LLSEEK #define __ARCH_WANT_SYS_RT_SIGACTION -#endif /* __KERNEL__ */ +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +#endif /* __KERNEL__ */ #endif /* _XTENSA_UNISTD_H */ + diff --git a/include/asm-xtensa/variant-fsf/core.h b/include/asm-xtensa/variant-fsf/core.h new file mode 100644 index 00000000000..2f337605c74 --- /dev/null +++ b/include/asm-xtensa/variant-fsf/core.h @@ -0,0 +1,359 @@ +/* + * Xtensa processor core configuration information. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2006 Tensilica Inc. + */ + +#ifndef _XTENSA_CORE_H +#define _XTENSA_CORE_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 1 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 64 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 0 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 0 /* SEXT instruction */ +#define XCHAL_HAVE_CLAMPS 0 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 0 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 0 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 0 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 0 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 1 /* processor ID register */ +#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */ +#define XCHAL_HAVE_CP 0 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one */ +#define XCHAL_HAVE_MAC16 0 /* MAC16 package */ +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */ +#define XCHAL_HAVE_FP 0 /* floating point pkg */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ +#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 4 /* data width in bytes */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ + +#define XCHAL_CORE_ID "fsf" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_BUILD_UNIQUE_ID 0x00006700 /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC103C3FF /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x0C006700 /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX2.0.0" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2200 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 0 /* minor ver# of targeted hw */ +#define XTHAL_HW_REL_LX2 1 +#define XTHAL_HW_REL_LX2_0 1 +#define XTHAL_HW_REL_LX2_0_0 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2200 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 0 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2200 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 0 /* minor v of latest tgt hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 16 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 16 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 4 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 4 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 8192 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 8192 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 0 /* writeback feature */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 8 +#define XCHAL_DCACHE_SETWIDTH 8 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 2 +#define XCHAL_DCACHE_WAYS 2 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 0 +#define XCHAL_DCACHE_LINE_LOCKABLE 0 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 + +/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ +#define XCHAL_CA_BITS 4 + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 0 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 17 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 10 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 1 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x000064F9 +#define XCHAL_INTLEVEL2_MASK 0x00008902 +#define XCHAL_INTLEVEL3_MASK 0x00011204 +#define XCHAL_INTLEVEL4_MASK 0x00000000 +#define XCHAL_INTLEVEL5_MASK 0x00000000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00000000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000064F9 +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x0000EDFB +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x0001FFFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x0001FFFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 2 +#define XCHAL_INT2_LEVEL 3 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 2 +#define XCHAL_INT9_LEVEL 3 +#define XCHAL_INT10_LEVEL 1 +#define XCHAL_INT11_LEVEL 2 +#define XCHAL_INT12_LEVEL 3 +#define XCHAL_INT13_LEVEL 1 +#define XCHAL_INT14_LEVEL 1 +#define XCHAL_INT15_LEVEL 2 +#define XCHAL_INT16_LEVEL 3 +#define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 0 /* OCD external db interrupt */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT15_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT16_TYPE XTHAL_INTTYPE_SOFTWARE + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFE0000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x0001E000 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000380 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000007F +#define XCHAL_INTTYPE_MASK_TIMER 0x00001C00 +#define XCHAL_INTTYPE_MASK_NMI 0x00000000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 10 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 11 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT 12 /* CCOMPARE2 */ +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +/* (There are many interrupts each at level(s) 1, 2, 3.) */ + + +/* + * External interrupt vectors/levels. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt<n> pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 2) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 3) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */ +#define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */ +#define XCHAL_EXTINT8_NUM 8 /* (intlevel 2) */ +#define XCHAL_EXTINT9_NUM 9 /* (intlevel 3) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ + +#define XCHAL_RESET_VECTOR_VADDR 0xFE000020 +#define XCHAL_RESET_VECTOR_PADDR 0xFE000020 +#define XCHAL_USER_VECTOR_VADDR 0xD0000220 +#define XCHAL_USER_VECTOR_PADDR 0x00000220 +#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000200 +#define XCHAL_KERNEL_VECTOR_PADDR 0x00000200 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD0000290 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x00000290 +#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000240 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000240 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xD0000250 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x00000250 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xFE000520 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xFE000520 +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See <xtensa/config/core-matmap.h> header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 0 /* one way maps I+D 4GB vaddr */ +#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 1 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ +/* If none of the above last 4 are set, it's a custom TLB configuration. */ +#define XCHAL_ITLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ +#define XCHAL_DTLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ + +#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 4 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 2 /* num of bits in RING field */ + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ + diff --git a/include/asm-xtensa/variant-fsf/tie.h b/include/asm-xtensa/variant-fsf/tie.h new file mode 100644 index 00000000000..a73c7166491 --- /dev/null +++ b/include/asm-xtensa/variant-fsf/tie.h @@ -0,0 +1,22 @@ +/* + * Xtensa processor core configuration information. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2006 Tensilica Inc. + */ + +#ifndef XTENSA_TIE_H +#define XTENSA_TIE_H + +/*---------------------------------------------------------------------- + COPROCESSORS and EXTRA STATE + ----------------------------------------------------------------------*/ + +#define XCHAL_CP_NUM 0 /* number of coprocessors */ +#define XCHAL_CP_MASK 0x00 + +#endif /*XTENSA_CONFIG_TIE_H*/ + diff --git a/include/asm-xtensa/xtensa/cacheasm.h b/include/asm-xtensa/xtensa/cacheasm.h deleted file mode 100644 index 0cdbb0bf180..00000000000 --- a/include/asm-xtensa/xtensa/cacheasm.h +++ /dev/null @@ -1,708 +0,0 @@ -#ifndef XTENSA_CACHEASM_H -#define XTENSA_CACHEASM_H - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/cacheasm.h -- assembler-specific cache - * related definitions that depend on CORE configuration. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include <xtensa/coreasm.h> - - -/* - * This header file defines assembler macros of the form: - * <x>cache_<func> - * where <x> is 'i' or 'd' for instruction and data caches, - * and <func> indicates the function of the macro. - * - * The following functions <func> are defined, - * and apply only to the specified cache (I or D): - * - * reset - * Resets the cache. - * - * sync - * Makes sure any previous cache instructions have been completed; - * ie. makes sure any previous cache control operations - * have had full effect and been synchronized to memory. - * Eg. any invalidate completed [so as not to generate a hit], - * any writebacks or other pipelined writes written to memory, etc. - * - * invalidate_line (single cache line) - * invalidate_region (specified memory range) - * invalidate_all (entire cache) - * Invalidates all cache entries that cache - * data from the specified memory range. - * NOTE: locked entries are not invalidated. - * - * writeback_line (single cache line) - * writeback_region (specified memory range) - * writeback_all (entire cache) - * Writes back to memory all dirty cache entries - * that cache data from the specified memory range, - * and marks these entries as clean. - * NOTE: on some future implementations, this might - * also invalidate. - * NOTE: locked entries are written back, but never invalidated. - * NOTE: instruction caches never implement writeback. - * - * writeback_inv_line (single cache line) - * writeback_inv_region (specified memory range) - * writeback_inv_all (entire cache) - * Writes back to memory all dirty cache entries - * that cache data from the specified memory range, - * and invalidates these entries (including all clean - * cache entries that cache data from that range). - * NOTE: locked entries are written back but not invalidated. - * NOTE: instruction caches never implement writeback. - * - * lock_line (single cache line) - * lock_region (specified memory range) - * Prefetch and lock the specified memory range into cache. - * NOTE: if any part of the specified memory range cannot - * be locked, a ??? exception occurs. These macros don't - * do anything special (yet anyway) to handle this situation. - * - * unlock_line (single cache line) - * unlock_region (specified memory range) - * unlock_all (entire cache) - * Unlock cache entries that cache the specified memory range. - * Entries not already locked are unaffected. - */ - - - -/*************************** GENERIC -- ALL CACHES ***************************/ - - -/* - * The following macros assume the following cache size/parameter limits - * in the current Xtensa core implementation: - * cache size: 1024 bytes minimum - * line size: 16 - 64 bytes - * way count: 1 - 4 - * - * Minimum entries per way (ie. per associativity) = 1024 / 64 / 4 = 4 - * Hence the assumption that each loop can execute four cache instructions. - * - * Correspondingly, the offset range of instructions is assumed able to cover - * four lines, ie. offsets {0,1,2,3} * line_size are assumed valid for - * both hit and indexed cache instructions. Ie. these offsets are all - * valid: 0, 16, 32, 48, 64, 96, 128, 192 (for line sizes 16, 32, 64). - * This is true of all original cache instructions - * (dhi, ihi, dhwb, dhwbi, dii, iii) which have offsets - * of 0 to 1020 in multiples of 4 (ie. 8 bits shifted by 2). - * This is also true of subsequent cache instructions - * (dhu, ihu, diu, iiu, diwb, diwbi, dpfl, ipfl) which have offsets - * of 0 to 240 in multiples of 16 (ie. 4 bits shifted by 4). - * - * (Maximum cache size, currently 32k, doesn't affect the following macros. - * Cache ways > MMU min page size cause aliasing but that's another matter.) - */ - - - -/* - * Macro to apply an 'indexed' cache instruction to the entire cache. - * - * Parameters: - * cainst instruction/ that takes an address register parameter - * and an offset parameter (in range 0 .. 3*linesize). - * size size of cache in bytes - * linesize size of cache line in bytes - * assoc_or1 number of associativities (ways/sets) in cache - * if all sets affected by cainst, - * or 1 if only one set (or not all sets) of the cache - * is affected by cainst (eg. DIWB or DIWBI [not yet ISA defined]). - * aa, ab unique address registers (temporaries) - */ - - .macro cache_index_all cainst, size, linesize, assoc_or1, aa, ab - - // Sanity-check on cache parameters: - .ifne (\size % (\linesize * \assoc_or1 * 4)) - .err // cache configuration outside expected/supported range! - .endif - - // \size byte cache, \linesize byte lines, \assoc_or1 way(s) affected by each \cainst. - movi \aa, (\size / (\linesize * \assoc_or1 * 4)) - // Possible improvement: need only loop if \aa > 1 ; - // however that particular condition is highly unlikely. - movi \ab, 0 // to iterate over cache - floop \aa, cachex\@ - \cainst \ab, 0*\linesize - \cainst \ab, 1*\linesize - \cainst \ab, 2*\linesize - \cainst \ab, 3*\linesize - addi \ab, \ab, 4*\linesize // move to next line - floopend \aa, cachex\@ - - .endm - - -/* - * Macro to apply a 'hit' cache instruction to a memory region, - * ie. to any cache entries that cache a specified portion (region) of memory. - * Takes care of the unaligned cases, ie. may apply to one - * more cache line than $asize / lineSize if $aaddr is not aligned. - * - * - * Parameters are: - * cainst instruction/macro that takes an address register parameter - * and an offset parameter (currently always zero) - * and generates a cache instruction (eg. "dhi", "dhwb", "ihi", etc.) - * linesize_log2 log2(size of cache line in bytes) - * addr register containing start address of region (clobbered) - * asize register containing size of the region in bytes (clobbered) - * askew unique register used as temporary - * - * !?!?! 2DO: optimization: iterate max(cache_size and \asize) / linesize - */ - - .macro cache_hit_region cainst, linesize_log2, addr, asize, askew - - // Make \asize the number of iterations: - extui \askew, \addr, 0, \linesize_log2 // get unalignment amount of \addr - add \asize, \asize, \askew // ... and add it to \asize - addi \asize, \asize, (1 << \linesize_log2) - 1 // round up! - srli \asize, \asize, \linesize_log2 - - // Iterate over region: - floopnez \asize, cacheh\@ - \cainst \addr, 0 - addi \addr, \addr, (1 << \linesize_log2) // move to next line - floopend \asize, cacheh\@ - - .endm - - - - - -/*************************** INSTRUCTION CACHE ***************************/ - - -/* - * Reset/initialize the instruction cache by simply invalidating it: - * (need to unlock first also, if cache locking implemented): - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro icache_reset aa, ab - icache_unlock_all \aa, \ab - icache_invalidate_all \aa, \ab - .endm - - -/* - * Synchronize after an instruction cache operation, - * to be sure everything is in sync with memory as to be - * expected following any previous instruction cache control operations. - * - * Parameters are: - * ar an address register (temporary) (currently unused, but may be used in future) - */ - .macro icache_sync ar -#if XCHAL_ICACHE_SIZE > 0 - isync -#endif - .endm - - - -/* - * Invalidate a single line of the instruction cache. - * Parameters are: - * ar address register that contains (virtual) address to invalidate - * (may get clobbered in a future implementation, but not currently) - * offset (optional) offset to add to \ar to compute effective address to invalidate - * (note: some number of lsbits are ignored) - */ - .macro icache_invalidate_line ar, offset -#if XCHAL_ICACHE_SIZE > 0 - ihi \ar, \offset // invalidate icache line - /* - * NOTE: in some version of the silicon [!!!SHOULD HAVE BEEN DOCUMENTED!!!] - * 'ihi' doesn't work, so it had been replaced with 'iii' - * (which would just invalidate more than it should, - * which should be okay other than the performance hit - * because cache locking did not exist in that version, - * unless user somehow relies on something being cached). - * [WHAT VERSION IS IT!!?!? - * IS THERE ANY WAY TO TEST FOR THAT HERE, TO OUTPUT 'III' ONLY IF NEEDED!?!?]. - * - * iii \ar, \offset - */ - icache_sync \ar -#endif - .endm - - - - -/* - * Invalidate instruction cache entries that cache a specified portion of memory. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro icache_invalidate_region astart, asize, ac -#if XCHAL_ICACHE_SIZE > 0 - // Instruction cache region invalidation: - cache_hit_region ihi, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac - icache_sync \ac - // End of instruction cache region invalidation -#endif - .endm - - - -/* - * Invalidate entire instruction cache. - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro icache_invalidate_all aa, ab -#if XCHAL_ICACHE_SIZE > 0 - // Instruction cache invalidation: - cache_index_all iii, XCHAL_ICACHE_SIZE, XCHAL_ICACHE_LINESIZE, XCHAL_ICACHE_WAYS, \aa, \ab - icache_sync \aa - // End of instruction cache invalidation -#endif - .endm - - - -/* - * Lock (prefetch & lock) a single line of the instruction cache. - * - * Parameters are: - * ar address register that contains (virtual) address to lock - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to lock - * (note: some number of lsbits are ignored) - */ - .macro icache_lock_line ar, offset -#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE - ipfl \ar, \offset /* prefetch and lock icache line */ - icache_sync \ar -#endif - .endm - - - -/* - * Lock (prefetch & lock) a specified portion of memory into the instruction cache. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro icache_lock_region astart, asize, ac -#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE - // Instruction cache region lock: - cache_hit_region ipfl, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac - icache_sync \ac - // End of instruction cache region lock -#endif - .endm - - - -/* - * Unlock a single line of the instruction cache. - * - * Parameters are: - * ar address register that contains (virtual) address to unlock - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to unlock - * (note: some number of lsbits are ignored) - */ - .macro icache_unlock_line ar, offset -#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE - ihu \ar, \offset /* unlock icache line */ - icache_sync \ar -#endif - .endm - - - -/* - * Unlock a specified portion of memory from the instruction cache. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro icache_unlock_region astart, asize, ac -#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE - // Instruction cache region unlock: - cache_hit_region ihu, XCHAL_ICACHE_LINEWIDTH, \astart, \asize, \ac - icache_sync \ac - // End of instruction cache region unlock -#endif - .endm - - - -/* - * Unlock entire instruction cache. - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro icache_unlock_all aa, ab -#if XCHAL_ICACHE_SIZE > 0 && XCHAL_ICACHE_LINE_LOCKABLE - // Instruction cache unlock: - cache_index_all iiu, XCHAL_ICACHE_SIZE, XCHAL_ICACHE_LINESIZE, 1, \aa, \ab - icache_sync \aa - // End of instruction cache unlock -#endif - .endm - - - - - -/*************************** DATA CACHE ***************************/ - - - -/* - * Reset/initialize the data cache by simply invalidating it - * (need to unlock first also, if cache locking implemented): - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro dcache_reset aa, ab - dcache_unlock_all \aa, \ab - dcache_invalidate_all \aa, \ab - .endm - - - - -/* - * Synchronize after a data cache operation, - * to be sure everything is in sync with memory as to be - * expected following any previous data cache control operations. - * - * Parameters are: - * ar an address register (temporary) (currently unused, but may be used in future) - */ - .macro dcache_sync ar -#if XCHAL_DCACHE_SIZE > 0 - // This previous sequence errs on the conservative side (too much so); a DSYNC should be sufficient: - //memw // synchronize data cache changes relative to subsequent memory accesses - //isync // be conservative and ISYNC as well (just to be sure) - - dsync -#endif - .endm - - - -/* - * Synchronize after a data store operation, - * to be sure the stored data is completely off the processor - * (and assuming there is no buffering outside the processor, - * that the data is in memory). This may be required to - * ensure that the processor's write buffers are emptied. - * A MEMW followed by a read guarantees this, by definition. - * We also try to make sure the read itself completes. - * - * Parameters are: - * ar an address register (temporary) - */ - .macro write_sync ar - memw // ensure previous memory accesses are complete prior to subsequent memory accesses - l32i \ar, sp, 0 // completing this read ensures any previous write has completed, because of MEMW - //slot - add \ar, \ar, \ar // use the result of the read to help ensure the read completes (in future architectures) - .endm - - -/* - * Invalidate a single line of the data cache. - * Parameters are: - * ar address register that contains (virtual) address to invalidate - * (may get clobbered in a future implementation, but not currently) - * offset (optional) offset to add to \ar to compute effective address to invalidate - * (note: some number of lsbits are ignored) - */ - .macro dcache_invalidate_line ar, offset -#if XCHAL_DCACHE_SIZE > 0 - dhi \ar, \offset - dcache_sync \ar -#endif - .endm - - - - - -/* - * Invalidate data cache entries that cache a specified portion of memory. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro dcache_invalidate_region astart, asize, ac -#if XCHAL_DCACHE_SIZE > 0 - // Data cache region invalidation: - cache_hit_region dhi, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac - dcache_sync \ac - // End of data cache region invalidation -#endif - .endm - - - -#if 0 -/* - * This is a work-around for a bug in SiChip1 (???). - * There should be a proper mechanism for not outputting - * these instructions when not needed. - * To enable work-around, uncomment this and replace 'dii' - * with 'dii_s1' everywhere, eg. in dcache_invalidate_all - * macro below. - */ - .macro dii_s1 ar, offset - dii \ar, \offset - or \ar, \ar, \ar - or \ar, \ar, \ar - or \ar, \ar, \ar - or \ar, \ar, \ar - .endm -#endif - - -/* - * Invalidate entire data cache. - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro dcache_invalidate_all aa, ab -#if XCHAL_DCACHE_SIZE > 0 - // Data cache invalidation: - cache_index_all dii, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, XCHAL_DCACHE_WAYS, \aa, \ab - dcache_sync \aa - // End of data cache invalidation -#endif - .endm - - - -/* - * Writeback a single line of the data cache. - * Parameters are: - * ar address register that contains (virtual) address to writeback - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to writeback - * (note: some number of lsbits are ignored) - */ - .macro dcache_writeback_line ar, offset -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK - dhwb \ar, \offset - dcache_sync \ar -#endif - .endm - - - -/* - * Writeback dirty data cache entries that cache a specified portion of memory. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro dcache_writeback_region astart, asize, ac -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK - // Data cache region writeback: - cache_hit_region dhwb, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac - dcache_sync \ac - // End of data cache region writeback -#endif - .endm - - - -/* - * Writeback entire data cache. - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro dcache_writeback_all aa, ab -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_IS_WRITEBACK - // Data cache writeback: - cache_index_all diwb, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab - dcache_sync \aa - // End of data cache writeback -#endif - .endm - - - -/* - * Writeback and invalidate a single line of the data cache. - * Parameters are: - * ar address register that contains (virtual) address to writeback and invalidate - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to writeback and invalidate - * (note: some number of lsbits are ignored) - */ - .macro dcache_writeback_inv_line ar, offset -#if XCHAL_DCACHE_SIZE > 0 - dhwbi \ar, \offset /* writeback and invalidate dcache line */ - dcache_sync \ar -#endif - .endm - - - -/* - * Writeback and invalidate data cache entries that cache a specified portion of memory. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro dcache_writeback_inv_region astart, asize, ac -#if XCHAL_DCACHE_SIZE > 0 - // Data cache region writeback and invalidate: - cache_hit_region dhwbi, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac - dcache_sync \ac - // End of data cache region writeback and invalidate -#endif - .endm - - - -/* - * Writeback and invalidate entire data cache. - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro dcache_writeback_inv_all aa, ab -#if XCHAL_DCACHE_SIZE > 0 - // Data cache writeback and invalidate: -#if XCHAL_DCACHE_IS_WRITEBACK - cache_index_all diwbi, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab - dcache_sync \aa -#else /*writeback*/ - // Data cache does not support writeback, so just invalidate: */ - dcache_invalidate_all \aa, \ab -#endif /*writeback*/ - // End of data cache writeback and invalidate -#endif - .endm - - - - -/* - * Lock (prefetch & lock) a single line of the data cache. - * - * Parameters are: - * ar address register that contains (virtual) address to lock - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to lock - * (note: some number of lsbits are ignored) - */ - .macro dcache_lock_line ar, offset -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE - dpfl \ar, \offset /* prefetch and lock dcache line */ - dcache_sync \ar -#endif - .endm - - - -/* - * Lock (prefetch & lock) a specified portion of memory into the data cache. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro dcache_lock_region astart, asize, ac -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE - // Data cache region lock: - cache_hit_region dpfl, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac - dcache_sync \ac - // End of data cache region lock -#endif - .endm - - - -/* - * Unlock a single line of the data cache. - * - * Parameters are: - * ar address register that contains (virtual) address to unlock - * (may get clobbered in a future implementation, but not currently) - * offset offset to add to \ar to compute effective address to unlock - * (note: some number of lsbits are ignored) - */ - .macro dcache_unlock_line ar, offset -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE - dhu \ar, \offset /* unlock dcache line */ - dcache_sync \ar -#endif - .endm - - - -/* - * Unlock a specified portion of memory from the data cache. - * Parameters are: - * astart start address (register gets clobbered) - * asize size of the region in bytes (register gets clobbered) - * ac unique register used as temporary - */ - .macro dcache_unlock_region astart, asize, ac -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE - // Data cache region unlock: - cache_hit_region dhu, XCHAL_DCACHE_LINEWIDTH, \astart, \asize, \ac - dcache_sync \ac - // End of data cache region unlock -#endif - .endm - - - -/* - * Unlock entire data cache. - * - * Parameters: - * aa, ab unique address registers (temporaries) - */ - .macro dcache_unlock_all aa, ab -#if XCHAL_DCACHE_SIZE > 0 && XCHAL_DCACHE_LINE_LOCKABLE - // Data cache unlock: - cache_index_all diu, XCHAL_DCACHE_SIZE, XCHAL_DCACHE_LINESIZE, 1, \aa, \ab - dcache_sync \aa - // End of data cache unlock -#endif - .endm - - -#endif /*XTENSA_CACHEASM_H*/ - diff --git a/include/asm-xtensa/xtensa/cacheattrasm.h b/include/asm-xtensa/xtensa/cacheattrasm.h deleted file mode 100644 index 1c3e117b359..00000000000 --- a/include/asm-xtensa/xtensa/cacheattrasm.h +++ /dev/null @@ -1,432 +0,0 @@ -#ifndef XTENSA_CACHEATTRASM_H -#define XTENSA_CACHEATTRASM_H - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/cacheattrasm.h -- assembler-specific - * CACHEATTR register related definitions that depend on CORE - * configuration. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include <xtensa/coreasm.h> - - -/* - * This header file defines assembler macros of the form: - * <x>cacheattr_<func> - * where: - * <x> is 'i', 'd' or absent for instruction, data - * or both caches; and - * <func> indicates the function of the macro. - * - * The following functions are defined: - * - * icacheattr_get - * Reads I-cache CACHEATTR into a2 (clobbers a3-a5). - * - * dcacheattr_get - * Reads D-cache CACHEATTR into a2 (clobbers a3-a5). - * (Note: for configs with a real CACHEATTR register, the - * above two macros are identical.) - * - * cacheattr_set - * Writes both I-cache and D-cache CACHEATTRs from a2 (a3-a8 clobbered). - * Works even when changing one's own code's attributes. - * - * icacheattr_is_enabled label - * Branches to \label if I-cache appears to have been enabled - * (eg. if CACHEATTR contains a cache-enabled attribute). - * (clobbers a2-a5,SAR) - * - * dcacheattr_is_enabled label - * Branches to \label if D-cache appears to have been enabled - * (eg. if CACHEATTR contains a cache-enabled attribute). - * (clobbers a2-a5,SAR) - * - * cacheattr_is_enabled label - * Branches to \label if either I-cache or D-cache appears to have been enabled - * (eg. if CACHEATTR contains a cache-enabled attribute). - * (clobbers a2-a5,SAR) - * - * The following macros are only defined under certain conditions: - * - * icacheattr_set (if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR) - * Writes I-cache CACHEATTR from a2 (a3-a8 clobbered). - * - * dcacheattr_set (if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR) - * Writes D-cache CACHEATTR from a2 (a3-a8 clobbered). - */ - - - -/*************************** GENERIC -- ALL CACHES ***************************/ - -/* - * _cacheattr_get - * - * (Internal macro.) - * Returns value of CACHEATTR register (or closest equivalent) in a2. - * - * Entry: - * (none) - * Exit: - * a2 value read from CACHEATTR - * a3-a5 clobbered (temporaries) - */ - .macro _cacheattr_get tlb -#if XCHAL_HAVE_CACHEATTR - rsr a2, CACHEATTR -#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - // We have a config that "mimics" CACHEATTR using a simplified - // "MMU" composed of a single statically-mapped way. - // DTLB and ITLB are independent, so there's no single - // cache attribute that can describe both. So for now - // just return the DTLB state. - movi a5, 0xE0000000 - movi a2, 0 - movi a3, 0 -1: add a3, a3, a5 // next segment - r&tlb&1 a4, a3 // get PPN+CA of segment at 0xE0000000, 0xC0000000, ..., 0 - dsync // interlock??? - slli a2, a2, 4 - extui a4, a4, 0, 4 // extract CA - or a2, a2, a4 - bnez a3, 1b -#else - // This macro isn't applicable to arbitrary MMU configurations. - // Just return zero. - movi a2, 0 -#endif - .endm - - .macro icacheattr_get - _cacheattr_get itlb - .endm - - .macro dcacheattr_get - _cacheattr_get dtlb - .endm - - -#define XCHAL_CACHEATTR_ALL_BYPASS 0x22222222 /* default (powerup/reset) value of CACHEATTR, all BYPASS - mode (ie. disabled/bypassed caches) */ - -#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - -#define XCHAL_FCA_ENAMASK 0x001A /* bitmap of fetch attributes that require enabled icache */ -#define XCHAL_LCA_ENAMASK 0x0003 /* bitmap of load attributes that require enabled dcache */ -#define XCHAL_SCA_ENAMASK 0x0003 /* bitmap of store attributes that require enabled dcache */ -#define XCHAL_LSCA_ENAMASK (XCHAL_LCA_ENAMASK|XCHAL_SCA_ENAMASK) /* l/s attrs requiring enabled dcache */ -#define XCHAL_ALLCA_ENAMASK (XCHAL_FCA_ENAMASK|XCHAL_LSCA_ENAMASK) /* all attrs requiring enabled caches */ - -/* - * _cacheattr_is_enabled - * - * (Internal macro.) - * Branches to \label if CACHEATTR in a2 indicates an enabled - * cache, using mask in a3. - * - * Parameters: - * label where to branch to if cache is enabled - * Entry: - * a2 contains CACHEATTR value used to determine whether - * caches are enabled - * a3 16-bit constant where each bit correspond to - * one of the 16 possible CA values (in a CACHEATTR mask); - * CA values that indicate the cache is enabled - * have their corresponding bit set in this mask - * (eg. use XCHAL_xCA_ENAMASK , above) - * Exit: - * a2,a4,a5 clobbered - * SAR clobbered - */ - .macro _cacheattr_is_enabled label - movi a4, 8 // loop 8 times -.Lcaife\@: - extui a5, a2, 0, 4 // get CA nibble - ssr a5 // index into mask according to CA... - srl a5, a3 // ...and get CA's mask bit in a5 bit 0 - bbsi.l a5, 0, \label // if CA indicates cache enabled, jump to label - srli a2, a2, 4 // next nibble - addi a4, a4, -1 - bnez a4, .Lcaife\@ // loop for each nibble - .endm - -#else /* XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ - .macro _cacheattr_is_enabled label - j \label // macro not applicable, assume caches always enabled - .endm -#endif /* XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ - - - -/* - * icacheattr_is_enabled - * - * Branches to \label if I-cache is enabled. - * - * Parameters: - * label where to branch to if icache is enabled - * Entry: - * (none) - * Exit: - * a2-a5, SAR clobbered (temporaries) - */ - .macro icacheattr_is_enabled label -#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - icacheattr_get - movi a3, XCHAL_FCA_ENAMASK -#endif - _cacheattr_is_enabled \label - .endm - -/* - * dcacheattr_is_enabled - * - * Branches to \label if D-cache is enabled. - * - * Parameters: - * label where to branch to if dcache is enabled - * Entry: - * (none) - * Exit: - * a2-a5, SAR clobbered (temporaries) - */ - .macro dcacheattr_is_enabled label -#if XCHAL_HAVE_CACHEATTR || XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - dcacheattr_get - movi a3, XCHAL_LSCA_ENAMASK -#endif - _cacheattr_is_enabled \label - .endm - -/* - * cacheattr_is_enabled - * - * Branches to \label if either I-cache or D-cache is enabled. - * - * Parameters: - * label where to branch to if a cache is enabled - * Entry: - * (none) - * Exit: - * a2-a5, SAR clobbered (temporaries) - */ - .macro cacheattr_is_enabled label -#if XCHAL_HAVE_CACHEATTR - rsr a2, CACHEATTR - movi a3, XCHAL_ALLCA_ENAMASK -#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - icacheattr_get - movi a3, XCHAL_FCA_ENAMASK - _cacheattr_is_enabled \label - dcacheattr_get - movi a3, XCHAL_LSCA_ENAMASK -#endif - _cacheattr_is_enabled \label - .endm - - - -/* - * The ISA does not have a defined way to change the - * instruction cache attributes of the running code, - * ie. of the memory area that encloses the current PC. - * However, each micro-architecture (or class of - * configurations within a micro-architecture) - * provides a way to deal with this issue. - * - * Here are a few macros used to implement the relevant - * approach taken. - */ - -#if XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - // We have a config that "mimics" CACHEATTR using a simplified - // "MMU" composed of a single statically-mapped way. - -/* - * icacheattr_set - * - * Entry: - * a2 cacheattr value to set - * Exit: - * a2 unchanged - * a3-a8 clobbered (temporaries) - */ - .macro icacheattr_set - - movi a5, 0xE0000000 // mask of upper 3 bits - movi a6, 3f // PC where ITLB is set - movi a3, 0 // start at region 0 (0 .. 7) - and a6, a6, a5 // upper 3 bits of local PC area - mov a7, a2 // copy a2 so it doesn't get clobbered - j 3f - -# if XCHAL_HAVE_XLT_CACHEATTR - // Can do translations, use generic method: -1: sub a6, a3, a5 // address of some other segment - ritlb1 a8, a6 // save its PPN+CA - dsync // interlock?? - witlb a4, a6 // make it translate to this code area - movi a6, 5f // where to jump into it - isync - sub a6, a6, a5 // adjust jump address within that other segment - jx a6 - - // Note that in the following code snippet, which runs at a different virtual - // address than it is assembled for, we avoid using literals (eg. via movi/l32r) - // just in case literals end up in a different 512 MB segment, and we avoid - // instructions that rely on the current PC being what is expected. - // - .align 4 - _j 6f // this is at label '5' minus 4 bytes - .align 4 -5: witlb a4, a3 // we're in other segment, now can write previous segment's CA - isync - add a6, a6, a5 // back to previous segment - addi a6, a6, -4 // next jump label - jx a6 - -6: sub a6, a3, a5 // address of some other segment - witlb a8, a6 // restore PPN+CA of other segment - mov a6, a3 // restore a6 - isync -# else /* XCHAL_HAVE_XLT_CACHEATTR */ - // Use micro-architecture specific method. - // The following 4-instruction sequence is aligned such that - // it all fits within a single I-cache line. Sixteen byte - // alignment is sufficient for this (using XCHAL_ICACHE_LINESIZE - // actually causes problems because that can be greater than - // the alignment of the reset vector, where this macro is often - // invoked, which would cause the linker to align the reset - // vector code away from the reset vector!!). - .align 16 /*XCHAL_ICACHE_LINESIZE*/ -1: _witlb a4, a3 // write wired PTE (CA, no PPN) of 512MB segment to ITLB - _isync - nop - nop -# endif /* XCHAL_HAVE_XLT_CACHEATTR */ - beq a3, a5, 4f // done? - - // Note that in the WITLB loop, we don't do any load/stores - // (may not be an issue here, but it is important in the DTLB case). -2: srli a7, a7, 4 // next CA - sub a3, a3, a5 // next segment (add 0x20000000) -3: -# if XCHAL_HAVE_XLT_CACHEATTR /* if have translation, preserve it */ - ritlb1 a8, a3 // get current PPN+CA of segment - dsync // interlock??? - extui a4, a7, 0, 4 // extract CA to set - srli a8, a8, 4 // clear CA but keep PPN ... - slli a8, a8, 4 // ... - add a4, a4, a8 // combine new CA with PPN to preserve -# else - extui a4, a7, 0, 4 // extract CA -# endif - beq a3, a6, 1b // current PC's region? if so, do it in a safe way - witlb a4, a3 // write wired PTE (CA [+PPN]) of 512MB segment to ITLB - bne a3, a5, 2b - isync // make sure all ifetch changes take effect -4: - .endm // icacheattr_set - - -/* - * dcacheattr_set - * - * Entry: - * a2 cacheattr value to set - * Exit: - * a2 unchanged - * a3-a8 clobbered (temporaries) - */ - - .macro dcacheattr_set - - movi a5, 0xE0000000 // mask of upper 3 bits - movi a3, 0 // start at region 0 (0 .. 7) - mov a7, a2 // copy a2 so it doesn't get clobbered - j 3f - // Note that in the WDTLB loop, we don't do any load/stores - // (including implicit l32r via movi) because it isn't safe. -2: srli a7, a7, 4 // next CA - sub a3, a3, a5 // next segment (add 0x20000000) -3: -# if XCHAL_HAVE_XLT_CACHEATTR /* if have translation, preserve it */ - rdtlb1 a8, a3 // get current PPN+CA of segment - dsync // interlock??? - extui a4, a7, 0, 4 // extract CA to set - srli a8, a8, 4 // clear CA but keep PPN ... - slli a8, a8, 4 // ... - add a4, a4, a8 // combine new CA with PPN to preserve -# else - extui a4, a7, 0, 4 // extract CA to set -# endif - wdtlb a4, a3 // write wired PTE (CA [+PPN]) of 512MB segment to DTLB - bne a3, a5, 2b - dsync // make sure all data path changes take effect - .endm // dcacheattr_set - -#endif /* XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR */ - - - -/* - * cacheattr_set - * - * Macro that sets the current CACHEATTR safely - * (both i and d) according to the current contents of a2. - * It works even when changing the cache attributes of - * the currently running code. - * - * Entry: - * a2 cacheattr value to set - * Exit: - * a2 unchanged - * a3-a8 clobbered (temporaries) - */ - .macro cacheattr_set - -#if XCHAL_HAVE_CACHEATTR -# if XCHAL_ICACHE_LINESIZE < 4 - // No i-cache, so can always safely write to CACHEATTR: - wsr a2, CACHEATTR -# else - // The Athens micro-architecture, when using the old - // exception architecture option (ie. with the CACHEATTR register) - // allows changing the cache attributes of the running code - // using the following exact sequence aligned to be within - // an instruction cache line. (NOTE: using XCHAL_ICACHE_LINESIZE - // alignment actually causes problems because that can be greater - // than the alignment of the reset vector, where this macro is often - // invoked, which would cause the linker to align the reset - // vector code away from the reset vector!!). - j 1f - .align 16 /*XCHAL_ICACHE_LINESIZE*/ // align to within an I-cache line -1: _wsr a2, CACHEATTR - _isync - nop - nop -# endif -#elif XCHAL_HAVE_MIMIC_CACHEATTR || XCHAL_HAVE_XLT_CACHEATTR - // DTLB and ITLB are independent, but to keep semantics - // of this macro we simply write to both. - icacheattr_set - dcacheattr_set -#else - // This macro isn't applicable to arbitrary MMU configurations. - // Do nothing in this case. -#endif - .endm - - -#endif /*XTENSA_CACHEATTRASM_H*/ - diff --git a/include/asm-xtensa/xtensa/config-linux_be/core.h b/include/asm-xtensa/xtensa/config-linux_be/core.h deleted file mode 100644 index d54fe5eb106..00000000000 --- a/include/asm-xtensa/xtensa/config-linux_be/core.h +++ /dev/null @@ -1,1270 +0,0 @@ -/* - * xtensa/config/core.h -- HAL definitions that are dependent on CORE configuration - * - * This header file is sometimes referred to as the "compile-time HAL" or CHAL. - * It was generated for a specific Xtensa processor configuration. - * - * Source for configuration-independent binaries (which link in a - * configuration-specific HAL library) must NEVER include this file. - * It is perfectly normal, however, for the HAL source itself to include this file. - */ - -/* - * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - - -#ifndef XTENSA_CONFIG_CORE_H -#define XTENSA_CONFIG_CORE_H - -#include <xtensa/hal.h> - - -/*---------------------------------------------------------------------- - GENERAL - ----------------------------------------------------------------------*/ - -/* - * Separators for macros that expand into arrays. - * These can be predefined by files that #include this one, - * when different separators are required. - */ -/* Element separator for macros that expand into 1-dimensional arrays: */ -#ifndef XCHAL_SEP -#define XCHAL_SEP , -#endif -/* Array separator for macros that expand into 2-dimensional arrays: */ -#ifndef XCHAL_SEP2 -#define XCHAL_SEP2 },{ -#endif - - -/*---------------------------------------------------------------------- - ENDIANNESS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_BE 1 -#define XCHAL_HAVE_LE 0 -#define XCHAL_MEMORY_ORDER XTHAL_BIGENDIAN - - -/*---------------------------------------------------------------------- - REGISTER WINDOWS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_WINDOWED 1 /* 1 if windowed registers option configured, 0 otherwise */ -#define XCHAL_NUM_AREGS 64 /* number of physical address regs */ -#define XCHAL_NUM_AREGS_LOG2 6 /* log2(XCHAL_NUM_AREGS) */ - - -/*---------------------------------------------------------------------- - ADDRESS ALIGNMENT - ----------------------------------------------------------------------*/ - -/* These apply to a selected set of core load and store instructions only (see ISA): */ -#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* 1 if unaligned loads cause an exception, 0 otherwise */ -#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* 1 if unaligned stores cause an exception, 0 otherwise */ - - -/*---------------------------------------------------------------------- - INTERRUPTS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_INTERRUPTS 1 /* 1 if interrupt option configured, 0 otherwise */ -#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* 1 if high-priority interrupt option configured, 0 otherwise */ -#define XCHAL_HAVE_HIGHLEVEL_INTERRUPTS XCHAL_HAVE_HIGHPRI_INTERRUPTS -#define XCHAL_HAVE_NMI 0 /* 1 if NMI option configured, 0 otherwise */ -#define XCHAL_NUM_INTERRUPTS 17 /* number of interrupts */ -#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* number of bits to hold an interrupt number: roundup(log2(number of interrupts)) */ -#define XCHAL_NUM_EXTINTERRUPTS 10 /* number of external interrupts */ -#define XCHAL_NUM_INTLEVELS 4 /* number of interrupt levels (not including level zero!) */ -#define XCHAL_NUM_LOWPRI_LEVELS 1 /* number of low-priority interrupt levels (always 1) */ -#define XCHAL_FIRST_HIGHPRI_LEVEL (XCHAL_NUM_LOWPRI_LEVELS+1) /* level of first high-priority interrupt (always 2) */ -#define XCHAL_EXCM_LEVEL 1 /* level of interrupts masked by PS.EXCM (XEA2 only; always 1 in T10xx); - for XEA1, where there is no PS.EXCM, this is always 1; - interrupts at levels FIRST_HIGHPRI <= n <= EXCM_LEVEL, if any, - are termed "medium priority" interrupts (post T10xx only) */ -/* Note: 1 <= LOWPRI_LEVELS <= EXCM_LEVEL < DEBUGLEVEL <= NUM_INTLEVELS < NMILEVEL <= 15 */ - -/* Masks of interrupts at each interrupt level: */ -#define XCHAL_INTLEVEL0_MASK 0x00000000 -#define XCHAL_INTLEVEL1_MASK 0x000064F9 -#define XCHAL_INTLEVEL2_MASK 0x00008902 -#define XCHAL_INTLEVEL3_MASK 0x00011204 -#define XCHAL_INTLEVEL4_MASK 0x00000000 -#define XCHAL_INTLEVEL5_MASK 0x00000000 -#define XCHAL_INTLEVEL6_MASK 0x00000000 -#define XCHAL_INTLEVEL7_MASK 0x00000000 -#define XCHAL_INTLEVEL8_MASK 0x00000000 -#define XCHAL_INTLEVEL9_MASK 0x00000000 -#define XCHAL_INTLEVEL10_MASK 0x00000000 -#define XCHAL_INTLEVEL11_MASK 0x00000000 -#define XCHAL_INTLEVEL12_MASK 0x00000000 -#define XCHAL_INTLEVEL13_MASK 0x00000000 -#define XCHAL_INTLEVEL14_MASK 0x00000000 -#define XCHAL_INTLEVEL15_MASK 0x00000000 -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_INTLEVEL_MASKS 0x00000000 XCHAL_SEP \ - 0x000064F9 XCHAL_SEP \ - 0x00008902 XCHAL_SEP \ - 0x00011204 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 XCHAL_SEP \ - 0x00000000 - -/* Masks of interrupts at each range 1..n of interrupt levels: */ -#define XCHAL_INTLEVEL0_ANDBELOW_MASK 0x00000000 -#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x000064F9 -#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x0000EDFB -#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL8_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL9_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL10_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL11_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL12_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL13_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL14_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_INTLEVEL15_ANDBELOW_MASK 0x0001FFFF -#define XCHAL_LOWPRI_MASK XCHAL_INTLEVEL1_ANDBELOW_MASK /* mask of all low-priority interrupts */ -#define XCHAL_EXCM_MASK XCHAL_INTLEVEL1_ANDBELOW_MASK /* mask of all interrupts masked by PS.EXCM (or CEXCM) */ -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_INTLEVEL_ANDBELOW_MASKS 0x00000000 XCHAL_SEP \ - 0x000064F9 XCHAL_SEP \ - 0x0000EDFB XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF XCHAL_SEP \ - 0x0001FFFF - -/* Interrupt numbers for each interrupt level at which only one interrupt was configured: */ -/*#define XCHAL_INTLEVEL1_NUM ...more than one interrupt at this level...*/ -/*#define XCHAL_INTLEVEL2_NUM ...more than one interrupt at this level...*/ -/*#define XCHAL_INTLEVEL3_NUM ...more than one interrupt at this level...*/ - -/* Level of each interrupt: */ -#define XCHAL_INT0_LEVEL 1 -#define XCHAL_INT1_LEVEL 2 -#define XCHAL_INT2_LEVEL 3 -#define XCHAL_INT3_LEVEL 1 -#define XCHAL_INT4_LEVEL 1 -#define XCHAL_INT5_LEVEL 1 -#define XCHAL_INT6_LEVEL 1 -#define XCHAL_INT7_LEVEL 1 -#define XCHAL_INT8_LEVEL 2 -#define XCHAL_INT9_LEVEL 3 -#define XCHAL_INT10_LEVEL 1 -#define XCHAL_INT11_LEVEL 2 -#define XCHAL_INT12_LEVEL 3 -#define XCHAL_INT13_LEVEL 1 -#define XCHAL_INT14_LEVEL 1 -#define XCHAL_INT15_LEVEL 2 -#define XCHAL_INT16_LEVEL 3 -#define XCHAL_INT17_LEVEL 0 -#define XCHAL_INT18_LEVEL 0 -#define XCHAL_INT19_LEVEL 0 -#define XCHAL_INT20_LEVEL 0 -#define XCHAL_INT21_LEVEL 0 -#define XCHAL_INT22_LEVEL 0 -#define XCHAL_INT23_LEVEL 0 -#define XCHAL_INT24_LEVEL 0 -#define XCHAL_INT25_LEVEL 0 -#define XCHAL_INT26_LEVEL 0 -#define XCHAL_INT27_LEVEL 0 -#define XCHAL_INT28_LEVEL 0 -#define XCHAL_INT29_LEVEL 0 -#define XCHAL_INT30_LEVEL 0 -#define XCHAL_INT31_LEVEL 0 -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_INT_LEVELS 1 XCHAL_SEP \ - 2 XCHAL_SEP \ - 3 XCHAL_SEP \ - 1 XCHAL_SEP \ - 1 XCHAL_SEP \ - 1 XCHAL_SEP \ - 1 XCHAL_SEP \ - 1 XCHAL_SEP \ - 2 XCHAL_SEP \ - 3 XCHAL_SEP \ - 1 XCHAL_SEP \ - 2 XCHAL_SEP \ - 3 XCHAL_SEP \ - 1 XCHAL_SEP \ - 1 XCHAL_SEP \ - 2 XCHAL_SEP \ - 3 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 XCHAL_SEP \ - 0 - -/* Type of each interrupt: */ -#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT6_TYPE XTHAL_INTTYPE_EXTERN_LEVEL -#define XCHAL_INT7_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_EDGE -#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT11_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT12_TYPE XTHAL_INTTYPE_TIMER -#define XCHAL_INT13_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT14_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT15_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT16_TYPE XTHAL_INTTYPE_SOFTWARE -#define XCHAL_INT17_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT18_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT19_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT20_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT21_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT22_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT23_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT24_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT25_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT26_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT27_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT28_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT29_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT30_TYPE XTHAL_INTTYPE_UNCONFIGURED -#define XCHAL_INT31_TYPE XTHAL_INTTYPE_UNCONFIGURED -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_INT_TYPES XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_LEVEL XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ - XTHAL_INTTYPE_EXTERN_EDGE XCHAL_SEP \ - XTHAL_INTTYPE_TIMER XCHAL_SEP \ - XTHAL_INTTYPE_TIMER XCHAL_SEP \ - XTHAL_INTTYPE_TIMER XCHAL_SEP \ - XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ - XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ - XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ - XTHAL_INTTYPE_SOFTWARE XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED XCHAL_SEP \ - XTHAL_INTTYPE_UNCONFIGURED - -/* Masks of interrupts for each type of interrupt: */ -#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFFE0000 -#define XCHAL_INTTYPE_MASK_SOFTWARE 0x0001E000 -#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x00000380 -#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000007F -#define XCHAL_INTTYPE_MASK_TIMER 0x00001C00 -#define XCHAL_INTTYPE_MASK_NMI 0x00000000 -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_INTTYPE_MASKS 0xFFFE0000 XCHAL_SEP \ - 0x0001E000 XCHAL_SEP \ - 0x00000380 XCHAL_SEP \ - 0x0000007F XCHAL_SEP \ - 0x00001C00 XCHAL_SEP \ - 0x00000000 - -/* Interrupts assigned to each timer (CCOMPARE0 to CCOMPARE3), -1 if unassigned */ -#define XCHAL_TIMER0_INTERRUPT 10 -#define XCHAL_TIMER1_INTERRUPT 11 -#define XCHAL_TIMER2_INTERRUPT 12 -#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED -/* As an array of entries (eg. for C constant arrays): */ -#define XCHAL_TIMER_INTERRUPTS 10 XCHAL_SEP \ - 11 XCHAL_SEP \ - 12 XCHAL_SEP \ - XTHAL_TIMER_UNCONFIGURED - -/* Indexing macros: */ -#define _XCHAL_INTLEVEL_MASK(n) XCHAL_INTLEVEL ## n ## _MASK -#define XCHAL_INTLEVEL_MASK(n) _XCHAL_INTLEVEL_MASK(n) /* n = 0 .. 15 */ -#define _XCHAL_INTLEVEL_ANDBELOWMASK(n) XCHAL_INTLEVEL ## n ## _ANDBELOW_MASK -#define XCHAL_INTLEVEL_ANDBELOW_MASK(n) _XCHAL_INTLEVEL_ANDBELOWMASK(n) /* n = 0 .. 15 */ -#define _XCHAL_INT_LEVEL(n) XCHAL_INT ## n ## _LEVEL -#define XCHAL_INT_LEVEL(n) _XCHAL_INT_LEVEL(n) /* n = 0 .. 31 */ -#define _XCHAL_INT_TYPE(n) XCHAL_INT ## n ## _TYPE -#define XCHAL_INT_TYPE(n) _XCHAL_INT_TYPE(n) /* n = 0 .. 31 */ -#define _XCHAL_TIMER_INTERRUPT(n) XCHAL_TIMER ## n ## _INTERRUPT -#define XCHAL_TIMER_INTERRUPT(n) _XCHAL_TIMER_INTERRUPT(n) /* n = 0 .. 3 */ - - - -/* - * External interrupt vectors/levels. - * These macros describe how Xtensa processor interrupt numbers - * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) - * map to external BInterrupt<n> pins, for those interrupts - * configured as external (level-triggered, edge-triggered, or NMI). - * See the Xtensa processor databook for more details. - */ - -/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ -#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ -#define XCHAL_EXTINT1_NUM 1 /* (intlevel 2) */ -#define XCHAL_EXTINT2_NUM 2 /* (intlevel 3) */ -#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ -#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ -#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ -#define XCHAL_EXTINT6_NUM 6 /* (intlevel 1) */ -#define XCHAL_EXTINT7_NUM 7 /* (intlevel 1) */ -#define XCHAL_EXTINT8_NUM 8 /* (intlevel 2) */ -#define XCHAL_EXTINT9_NUM 9 /* (intlevel 3) */ - -/* Corresponding interrupt masks: */ -#define XCHAL_EXTINT0_MASK 0x00000001 -#define XCHAL_EXTINT1_MASK 0x00000002 -#define XCHAL_EXTINT2_MASK 0x00000004 -#define XCHAL_EXTINT3_MASK 0x00000008 -#define XCHAL_EXTINT4_MASK 0x00000010 -#define XCHAL_EXTINT5_MASK 0x00000020 -#define XCHAL_EXTINT6_MASK 0x00000040 -#define XCHAL_EXTINT7_MASK 0x00000080 -#define XCHAL_EXTINT8_MASK 0x00000100 -#define XCHAL_EXTINT9_MASK 0x00000200 - -/* Core config interrupt levels mapped to each external interrupt: */ -#define XCHAL_EXTINT0_LEVEL 1 /* (int number 0) */ -#define XCHAL_EXTINT1_LEVEL 2 /* (int number 1) */ -#define XCHAL_EXTINT2_LEVEL 3 /* (int number 2) */ -#define XCHAL_EXTINT3_LEVEL 1 /* (int number 3) */ -#define XCHAL_EXTINT4_LEVEL 1 /* (int number 4) */ -#define XCHAL_EXTINT5_LEVEL 1 /* (int number 5) */ -#define XCHAL_EXTINT6_LEVEL 1 /* (int number 6) */ -#define XCHAL_EXTINT7_LEVEL 1 /* (int number 7) */ -#define XCHAL_EXTINT8_LEVEL 2 /* (int number 8) */ -#define XCHAL_EXTINT9_LEVEL 3 /* (int number 9) */ - - -/*---------------------------------------------------------------------- - EXCEPTIONS and VECTORS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_EXCEPTIONS 1 /* 1 if exception option configured, 0 otherwise */ - -#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture number: 1 for XEA1 (old), 2 for XEA2 (new) */ -#define XCHAL_HAVE_XEA1 0 /* 1 if XEA1, 0 otherwise */ -#define XCHAL_HAVE_XEA2 1 /* 1 if XEA2, 0 otherwise */ -/* For backward compatibility ONLY -- DO NOT USE (will be removed in future release): */ -#define XCHAL_HAVE_OLD_EXC_ARCH XCHAL_HAVE_XEA1 /* (DEPRECATED) 1 if old exception architecture (XEA1), 0 otherwise (eg. XEA2) */ -#define XCHAL_HAVE_EXCM XCHAL_HAVE_XEA2 /* (DEPRECATED) 1 if PS.EXCM bit exists (currently equals XCHAL_HAVE_TLBS) */ - -#define XCHAL_RESET_VECTOR_VADDR 0xFE000020 -#define XCHAL_RESET_VECTOR_PADDR 0xFE000020 -#define XCHAL_USER_VECTOR_VADDR 0xD0000220 -#define XCHAL_PROGRAMEXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR /* for backward compatibility */ -#define XCHAL_USEREXC_VECTOR_VADDR XCHAL_USER_VECTOR_VADDR /* for backward compatibility */ -#define XCHAL_USER_VECTOR_PADDR 0x00000220 -#define XCHAL_PROGRAMEXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR /* for backward compatibility */ -#define XCHAL_USEREXC_VECTOR_PADDR XCHAL_USER_VECTOR_PADDR /* for backward compatibility */ -#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000200 -#define XCHAL_STACKEDEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR /* for backward compatibility */ -#define XCHAL_KERNELEXC_VECTOR_VADDR XCHAL_KERNEL_VECTOR_VADDR /* for backward compatibility */ -#define XCHAL_KERNEL_VECTOR_PADDR 0x00000200 -#define XCHAL_STACKEDEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR /* for backward compatibility */ -#define XCHAL_KERNELEXC_VECTOR_PADDR XCHAL_KERNEL_VECTOR_PADDR /* for backward compatibility */ -#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD0000290 -#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x00000290 -#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000 -#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000 -#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000240 -#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000240 -#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xD0000250 -#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x00000250 -#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xFE000520 -#define XCHAL_INTLEVEL4_VECTOR_PADDR 0xFE000520 -#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL4_VECTOR_VADDR -#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL4_VECTOR_PADDR - -/* Indexing macros: */ -#define _XCHAL_INTLEVEL_VECTOR_VADDR(n) XCHAL_INTLEVEL ## n ## _VECTOR_VADDR -#define XCHAL_INTLEVEL_VECTOR_VADDR(n) _XCHAL_INTLEVEL_VECTOR_VADDR(n) /* n = 0 .. 15 */ - -/* - * General Exception Causes - * (values of EXCCAUSE special register set by general exceptions, - * which vector to the user, kernel, or double-exception vectors): - */ -#define XCHAL_EXCCAUSE_ILLEGAL_INSTRUCTION 0 /* Illegal Instruction (IllegalInstruction) */ -#define XCHAL_EXCCAUSE_SYSTEM_CALL 1 /* System Call (SystemCall) */ -#define XCHAL_EXCCAUSE_INSTRUCTION_FETCH_ERROR 2 /* Instruction Fetch Error (InstructionFetchError) */ -#define XCHAL_EXCCAUSE_LOAD_STORE_ERROR 3 /* Load Store Error (LoadStoreError) */ -#define XCHAL_EXCCAUSE_LEVEL1_INTERRUPT 4 /* Level 1 Interrupt (Level1Interrupt) */ -#define XCHAL_EXCCAUSE_ALLOCA 5 /* Stack Extension Assist (Alloca) */ -#define XCHAL_EXCCAUSE_INTEGER_DIVIDE_BY_ZERO 6 /* Integer Divide by Zero (IntegerDivideByZero) */ -#define XCHAL_EXCCAUSE_SPECULATION 7 /* Speculation (Speculation) */ -#define XCHAL_EXCCAUSE_PRIVILEGED 8 /* Privileged Instruction (Privileged) */ -#define XCHAL_EXCCAUSE_UNALIGNED 9 /* Unaligned Load Store (Unaligned) */ -#define XCHAL_EXCCAUSE_ITLB_MISS 16 /* ITlb Miss Exception (ITlbMiss) */ -#define XCHAL_EXCCAUSE_ITLB_MULTIHIT 17 /* ITlb Mutltihit Exception (ITlbMultihit) */ -#define XCHAL_EXCCAUSE_ITLB_PRIVILEGE 18 /* ITlb Privilege Exception (ITlbPrivilege) */ -#define XCHAL_EXCCAUSE_ITLB_SIZE_RESTRICTION 19 /* ITlb Size Restriction Exception (ITlbSizeRestriction) */ -#define XCHAL_EXCCAUSE_FETCH_CACHE_ATTRIBUTE 20 /* Fetch Cache Attribute Exception (FetchCacheAttribute) */ -#define XCHAL_EXCCAUSE_DTLB_MISS 24 /* DTlb Miss Exception (DTlbMiss) */ -#define XCHAL_EXCCAUSE_DTLB_MULTIHIT 25 /* DTlb Multihit Exception (DTlbMultihit) */ -#define XCHAL_EXCCAUSE_DTLB_PRIVILEGE 26 /* DTlb Privilege Exception (DTlbPrivilege) */ -#define XCHAL_EXCCAUSE_DTLB_SIZE_RESTRICTION 27 /* DTlb Size Restriction Exception (DTlbSizeRestriction) */ -#define XCHAL_EXCCAUSE_LOAD_CACHE_ATTRIBUTE 28 /* Load Cache Attribute Exception (LoadCacheAttribute) */ -#define XCHAL_EXCCAUSE_STORE_CACHE_ATTRIBUTE 29 /* Store Cache Attribute Exception (StoreCacheAttribute) */ -#define XCHAL_EXCCAUSE_FLOATING_POINT 40 /* Floating Point Exception (FloatingPoint) */ - - - -/*---------------------------------------------------------------------- - TIMERS - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_CCOUNT 1 /* 1 if have CCOUNT, 0 otherwise */ -/*#define XCHAL_HAVE_TIMERS XCHAL_HAVE_CCOUNT*/ -#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ - - - -/*---------------------------------------------------------------------- - DEBUG - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_DEBUG 1 /* 1 if debug option configured, 0 otherwise */ -#define XCHAL_HAVE_OCD 1 /* 1 if OnChipDebug option configured, 0 otherwise */ -#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ -#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ -#define XCHAL_DEBUGLEVEL 4 /* debug interrupt level */ -/*DebugExternalInterrupt 0 0|1*/ -/*DebugUseDIRArray 0 0|1*/ - - - - -/*---------------------------------------------------------------------- - COPROCESSORS and EXTRA STATE - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_CP 0 /* 1 if coprocessor option configured (CPENABLE present) */ -#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one (per cfg) */ - -#include <xtensa/config/tie.h> - - - - -/*---------------------------------------------------------------------- - INTERNAL I/D RAM/ROMs and XLMI - ----------------------------------------------------------------------*/ - -#define XCHAL_NUM_INSTROM 0 /* number of core instruction ROMs configured */ -#define XCHAL_NUM_INSTRAM 0 /* number of core instruction RAMs configured */ -#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs configured */ -#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs configured */ -#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports configured */ -#define XCHAL_NUM_IROM XCHAL_NUM_INSTROM /* (DEPRECATED) */ -#define XCHAL_NUM_IRAM XCHAL_NUM_INSTRAM /* (DEPRECATED) */ -#define XCHAL_NUM_DROM XCHAL_NUM_DATAROM /* (DEPRECATED) */ -#define XCHAL_NUM_DRAM XCHAL_NUM_DATARAM /* (DEPRECATED) */ - - - -/*---------------------------------------------------------------------- - CACHE - ----------------------------------------------------------------------*/ - -/* Size of the cache lines in log2(bytes): */ -#define XCHAL_ICACHE_LINEWIDTH 4 -#define XCHAL_DCACHE_LINEWIDTH 4 -/* Size of the cache lines in bytes: */ -#define XCHAL_ICACHE_LINESIZE 16 -#define XCHAL_DCACHE_LINESIZE 16 -/* Max for both I-cache and D-cache (used for general alignment): */ -#define XCHAL_CACHE_LINEWIDTH_MAX 4 -#define XCHAL_CACHE_LINESIZE_MAX 16 - -/* Number of cache sets in log2(lines per way): */ -#define XCHAL_ICACHE_SETWIDTH 8 -#define XCHAL_DCACHE_SETWIDTH 8 -/* Max for both I-cache and D-cache (used for general cache-coherency page alignment): */ -#define XCHAL_CACHE_SETWIDTH_MAX 8 -#define XCHAL_CACHE_SETSIZE_MAX 256 - -/* Cache set associativity (number of ways): */ -#define XCHAL_ICACHE_WAYS 2 -#define XCHAL_DCACHE_WAYS 2 - -/* Size of the caches in bytes (ways * 2^(linewidth + setwidth)): */ -#define XCHAL_ICACHE_SIZE 8192 -#define XCHAL_DCACHE_SIZE 8192 - -/* Cache features: */ -#define XCHAL_DCACHE_IS_WRITEBACK 0 -/* Whether cache locking feature is available: */ -#define XCHAL_ICACHE_LINE_LOCKABLE 0 -#define XCHAL_DCACHE_LINE_LOCKABLE 0 - -/* Number of (encoded) cache attribute bits: */ -#define XCHAL_CA_BITS 4 /* number of bits needed to hold cache attribute encoding */ -/* (The number of access mode bits (decoded cache attribute bits) is defined by the architecture; see xtensa/hal.h?) */ - - -/* Cache Attribute encodings -- lists of access modes for each cache attribute: */ -#define XCHAL_FCA_LIST XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_BYPASS XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_BYPASS XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_CACHED XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_CACHED XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_CACHED XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_CACHED XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_EXCEPTION XCHAL_SEP \ - XTHAL_FAM_EXCEPTION -#define XCHAL_LCA_LIST XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_BYPASSG XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_BYPASSG XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_CACHED XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_CACHED XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_NACACHED XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_NACACHED XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_ISOLATE XCHAL_SEP \ - XTHAL_LAM_EXCEPTION XCHAL_SEP \ - XTHAL_LAM_CACHED -#define XCHAL_SCA_LIST XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_BYPASS XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_WRITETHRU XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_WRITETHRU XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_ISOLATE XCHAL_SEP \ - XTHAL_SAM_EXCEPTION XCHAL_SEP \ - XTHAL_SAM_WRITETHRU - -/* Test: - read/only: 0 + 1 + 2 + 4 + 5 + 6 + 8 + 9 + 10 + 12 + 14 - read/only: 0 + 1 + 2 + 4 + 5 + 6 + 8 + 9 + 10 + 12 + 14 - all: 0 + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + 15 - fault: 0 + 2 + 4 + 6 + 8 + 10 + 12 + 14 - r/w/x cached: - r/w/x dcached: - I-bypass: 1 + 3 - - load guard bit set: 1 + 3 - load guard bit clr: 0 + 2 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + 15 - hit-cache r/w/x: 7 + 11 - - fams: 5 - fams: 0 / 6 / 18 / 1 / 2 - fams: Bypass / Isolate / Cached / Exception / NACached - - MMU okay: yes -*/ - - -/*---------------------------------------------------------------------- - MMU - ----------------------------------------------------------------------*/ - -/* - * General notes on MMU parameters. - * - * Terminology: - * ASID = address-space ID (acts as an "extension" of virtual addresses) - * VPN = virtual page number - * PPN = physical page number - * CA = encoded cache attribute (access modes) - * TLB = translation look-aside buffer (term is stretched somewhat here) - * I = instruction (fetch accesses) - * D = data (load and store accesses) - * way = each TLB (ITLB and DTLB) consists of a number of "ways" - * that simultaneously match the virtual address of an access; - * a TLB successfully translates a virtual address if exactly - * one way matches the vaddr; if none match, it is a miss; - * if multiple match, one gets a "multihit" exception; - * each way can be independently configured in terms of number of - * entries, page sizes, which fields are writable or constant, etc. - * set = group of contiguous ways with exactly identical parameters - * ARF = auto-refill; hardware services a 1st-level miss by loading a PTE - * from the page table and storing it in one of the auto-refill ways; - * if this PTE load also misses, a miss exception is posted for s/w. - * min-wired = a "min-wired" way can be used to map a single (minimum-sized) - * page arbitrarily under program control; it has a single entry, - * is non-auto-refill (some other way(s) must be auto-refill), - * all its fields (VPN, PPN, ASID, CA) are all writable, and it - * supports the XCHAL_MMU_MIN_PTE_PAGE_SIZE page size (a current - * restriction is that this be the only page size it supports). - * - * TLB way entries are virtually indexed. - * TLB ways that support multiple page sizes: - * - must have all writable VPN and PPN fields; - * - can only use one page size at any given time (eg. setup at startup), - * selected by the respective ITLBCFG or DTLBCFG special register, - * whose bits n*4+3 .. n*4 index the list of page sizes for way n - * (XCHAL_xTLB_SETm_PAGESZ_LOG2_LIST for set m corresponding to way n); - * this list may be sparse for auto-refill ways because auto-refill - * ways have independent lists of supported page sizes sharing a - * common encoding with PTE entries; the encoding is the index into - * this list; unsupported sizes for a given way are zero in the list; - * selecting unsupported sizes results in undefined hardware behaviour; - * - is only possible for ways 0 thru 7 (due to ITLBCFG/DTLBCFG definition). - */ - -#define XCHAL_HAVE_CACHEATTR 0 /* 1 if CACHEATTR register present, 0 if TLBs present instead */ -#define XCHAL_HAVE_TLBS 1 /* 1 if TLBs present, 0 if CACHEATTR present instead */ -#define XCHAL_HAVE_MMU XCHAL_HAVE_TLBS /* (DEPRECATED; use XCHAL_HAVE_TLBS instead; will be removed in future release) */ -#define XCHAL_HAVE_SPANNING_WAY 0 /* 1 if single way maps entire virtual address space in I+D */ -#define XCHAL_HAVE_IDENTITY_MAP 0 /* 1 if virtual addr == physical addr always, 0 otherwise */ -#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* 1 if have MMU that mimics a CACHEATTR config (CaMMU) */ -#define XCHAL_HAVE_XLT_CACHEATTR 0 /* 1 if have MMU that mimics a CACHEATTR config, but with translation (CaXltMMU) */ - -#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs (address space IDs) */ -#define XCHAL_MMU_ASID_INVALID 0 /* ASID value indicating invalid address space */ -#define XCHAL_MMU_ASID_KERNEL 1 /* ASID value indicating kernel (ring 0) address space */ -#define XCHAL_MMU_RINGS 4 /* number of rings supported (1..4) */ -#define XCHAL_MMU_RING_BITS 2 /* number of bits needed to hold ring number */ -#define XCHAL_MMU_SR_BITS 0 /* number of size-restriction bits supported */ -#define XCHAL_MMU_CA_BITS 4 /* number of bits needed to hold cache attribute encoding */ -#define XCHAL_MMU_MAX_PTE_PAGE_SIZE 12 /* max page size in a PTE structure (log2) */ -#define XCHAL_MMU_MIN_PTE_PAGE_SIZE 12 /* min page size in a PTE structure (log2) */ - - -/*** Instruction TLB: ***/ - -#define XCHAL_ITLB_WAY_BITS 3 /* number of bits holding the ways */ -#define XCHAL_ITLB_WAYS 7 /* number of ways (n-way set-associative TLB) */ -#define XCHAL_ITLB_ARF_WAYS 4 /* number of auto-refill ways */ -#define XCHAL_ITLB_SETS 4 /* number of sets (groups of ways with identical settings) */ - -/* Way set to which each way belongs: */ -#define XCHAL_ITLB_WAY0_SET 0 -#define XCHAL_ITLB_WAY1_SET 0 -#define XCHAL_ITLB_WAY2_SET 0 -#define XCHAL_ITLB_WAY3_SET 0 -#define XCHAL_ITLB_WAY4_SET 1 -#define XCHAL_ITLB_WAY5_SET 2 -#define XCHAL_ITLB_WAY6_SET 3 - -/* Ways sets that are used by hardware auto-refill (ARF): */ -#define XCHAL_ITLB_ARF_SETS 1 /* number of auto-refill sets */ -#define XCHAL_ITLB_ARF_SET0 0 /* index of n'th auto-refill set */ - -/* Way sets that are "min-wired" (see terminology comment above): */ -#define XCHAL_ITLB_MINWIRED_SETS 0 /* number of "min-wired" sets */ - - -/* ITLB way set 0 (group of ways 0 thru 3): */ -#define XCHAL_ITLB_SET0_WAY 0 /* index of first way in this way set */ -#define XCHAL_ITLB_SET0_WAYS 4 /* number of (contiguous) ways in this way set */ -#define XCHAL_ITLB_SET0_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ -#define XCHAL_ITLB_SET0_ENTRIES 4 /* number of entries in this way (always a power of 2) */ -#define XCHAL_ITLB_SET0_ARF 1 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_ITLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_ITLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ -#define XCHAL_ITLB_SET0_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ -#define XCHAL_ITLB_SET0_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_ITLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ -#define XCHAL_ITLB_SET0_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET0_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ -#define XCHAL_ITLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET0_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ - -/* ITLB way set 1 (group of ways 4 thru 4): */ -#define XCHAL_ITLB_SET1_WAY 4 /* index of first way in this way set */ -#define XCHAL_ITLB_SET1_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_ITLB_SET1_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ -#define XCHAL_ITLB_SET1_ENTRIES 4 /* number of entries in this way (always a power of 2) */ -#define XCHAL_ITLB_SET1_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_ITLB_SET1_PAGESIZES 4 /* number of supported page sizes in this way */ -#define XCHAL_ITLB_SET1_PAGESZ_BITS 2 /* number of bits to encode the page size */ -#define XCHAL_ITLB_SET1_PAGESZ_LOG2_MIN 20 /* log2(minimum supported page size) */ -#define XCHAL_ITLB_SET1_PAGESZ_LOG2_MAX 26 /* log2(maximum supported page size) */ -#define XCHAL_ITLB_SET1_PAGESZ_LOG2_LIST 20 XCHAL_SEP 22 XCHAL_SEP 24 XCHAL_SEP 26 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_ITLB_SET1_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ -#define XCHAL_ITLB_SET1_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET1_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET1_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ -#define XCHAL_ITLB_SET1_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET1_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET1_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET1_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ - -/* ITLB way set 2 (group of ways 5 thru 5): */ -#define XCHAL_ITLB_SET2_WAY 5 /* index of first way in this way set */ -#define XCHAL_ITLB_SET2_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_ITLB_SET2_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ -#define XCHAL_ITLB_SET2_ENTRIES 2 /* number of entries in this way (always a power of 2) */ -#define XCHAL_ITLB_SET2_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_ITLB_SET2_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_ITLB_SET2_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_ITLB_SET2_PAGESZ_LOG2_MIN 27 /* log2(minimum supported page size) */ -#define XCHAL_ITLB_SET2_PAGESZ_LOG2_MAX 27 /* log2(maximum supported page size) */ -#define XCHAL_ITLB_SET2_PAGESZ_LOG2_LIST 27 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_ITLB_SET2_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ -#define XCHAL_ITLB_SET2_VPN_CONSTMASK 0xF0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET2_PPN_CONSTMASK 0xF8000000 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET2_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ -#define XCHAL_ITLB_SET2_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET2_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET2_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET2_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ -/* Constant ASID values for each entry of ITLB way set 2 (because ASID_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET2_E0_ASID_CONST 0x01 -#define XCHAL_ITLB_SET2_E1_ASID_CONST 0x01 -/* Constant VPN values for each entry of ITLB way set 2 (because VPN_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET2_E0_VPN_CONST 0xD0000000 -#define XCHAL_ITLB_SET2_E1_VPN_CONST 0xD8000000 -/* Constant PPN values for each entry of ITLB way set 2 (because PPN_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET2_E0_PPN_CONST 0x00000000 -#define XCHAL_ITLB_SET2_E1_PPN_CONST 0x00000000 -/* Constant CA values for each entry of ITLB way set 2 (because CA_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET2_E0_CA_CONST 0x07 -#define XCHAL_ITLB_SET2_E1_CA_CONST 0x03 - -/* ITLB way set 3 (group of ways 6 thru 6): */ -#define XCHAL_ITLB_SET3_WAY 6 /* index of first way in this way set */ -#define XCHAL_ITLB_SET3_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_ITLB_SET3_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ -#define XCHAL_ITLB_SET3_ENTRIES 2 /* number of entries in this way (always a power of 2) */ -#define XCHAL_ITLB_SET3_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_ITLB_SET3_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_ITLB_SET3_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_ITLB_SET3_PAGESZ_LOG2_MIN 28 /* log2(minimum supported page size) */ -#define XCHAL_ITLB_SET3_PAGESZ_LOG2_MAX 28 /* log2(maximum supported page size) */ -#define XCHAL_ITLB_SET3_PAGESZ_LOG2_LIST 28 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_ITLB_SET3_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ -#define XCHAL_ITLB_SET3_VPN_CONSTMASK 0xE0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET3_PPN_CONSTMASK 0xF0000000 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_ITLB_SET3_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ -#define XCHAL_ITLB_SET3_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET3_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET3_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_ITLB_SET3_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ -/* Constant ASID values for each entry of ITLB way set 3 (because ASID_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET3_E0_ASID_CONST 0x01 -#define XCHAL_ITLB_SET3_E1_ASID_CONST 0x01 -/* Constant VPN values for each entry of ITLB way set 3 (because VPN_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET3_E0_VPN_CONST 0xE0000000 -#define XCHAL_ITLB_SET3_E1_VPN_CONST 0xF0000000 -/* Constant PPN values for each entry of ITLB way set 3 (because PPN_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET3_E0_PPN_CONST 0xF0000000 -#define XCHAL_ITLB_SET3_E1_PPN_CONST 0xF0000000 -/* Constant CA values for each entry of ITLB way set 3 (because CA_CONSTMASK is non-zero): */ -#define XCHAL_ITLB_SET3_E0_CA_CONST 0x07 -#define XCHAL_ITLB_SET3_E1_CA_CONST 0x03 - -/* Indexing macros: */ -#define _XCHAL_ITLB_SET(n,_what) XCHAL_ITLB_SET ## n ## _what -#define XCHAL_ITLB_SET(n,what) _XCHAL_ITLB_SET(n, _ ## what ) -#define _XCHAL_ITLB_SET_E(n,i,_what) XCHAL_ITLB_SET ## n ## _E ## i ## _what -#define XCHAL_ITLB_SET_E(n,i,what) _XCHAL_ITLB_SET_E(n,i, _ ## what ) -/* - * Example use: XCHAL_ITLB_SET(XCHAL_ITLB_ARF_SET0,ENTRIES) - * to get the value of XCHAL_ITLB_SET<n>_ENTRIES where <n> is the first auto-refill set. - */ - - -/*** Data TLB: ***/ - -#define XCHAL_DTLB_WAY_BITS 4 /* number of bits holding the ways */ -#define XCHAL_DTLB_WAYS 10 /* number of ways (n-way set-associative TLB) */ -#define XCHAL_DTLB_ARF_WAYS 4 /* number of auto-refill ways */ -#define XCHAL_DTLB_SETS 5 /* number of sets (groups of ways with identical settings) */ - -/* Way set to which each way belongs: */ -#define XCHAL_DTLB_WAY0_SET 0 -#define XCHAL_DTLB_WAY1_SET 0 -#define XCHAL_DTLB_WAY2_SET 0 -#define XCHAL_DTLB_WAY3_SET 0 -#define XCHAL_DTLB_WAY4_SET 1 -#define XCHAL_DTLB_WAY5_SET 2 -#define XCHAL_DTLB_WAY6_SET 3 -#define XCHAL_DTLB_WAY7_SET 4 -#define XCHAL_DTLB_WAY8_SET 4 -#define XCHAL_DTLB_WAY9_SET 4 - -/* Ways sets that are used by hardware auto-refill (ARF): */ -#define XCHAL_DTLB_ARF_SETS 1 /* number of auto-refill sets */ -#define XCHAL_DTLB_ARF_SET0 0 /* index of n'th auto-refill set */ - -/* Way sets that are "min-wired" (see terminology comment above): */ -#define XCHAL_DTLB_MINWIRED_SETS 1 /* number of "min-wired" sets */ -#define XCHAL_DTLB_MINWIRED_SET0 4 /* index of n'th "min-wired" set */ - - -/* DTLB way set 0 (group of ways 0 thru 3): */ -#define XCHAL_DTLB_SET0_WAY 0 /* index of first way in this way set */ -#define XCHAL_DTLB_SET0_WAYS 4 /* number of (contiguous) ways in this way set */ -#define XCHAL_DTLB_SET0_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ -#define XCHAL_DTLB_SET0_ENTRIES 4 /* number of entries in this way (always a power of 2) */ -#define XCHAL_DTLB_SET0_ARF 1 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_DTLB_SET0_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_DTLB_SET0_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ -#define XCHAL_DTLB_SET0_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ -#define XCHAL_DTLB_SET0_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_DTLB_SET0_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ -#define XCHAL_DTLB_SET0_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET0_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET0_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ -#define XCHAL_DTLB_SET0_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET0_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET0_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET0_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ - -/* DTLB way set 1 (group of ways 4 thru 4): */ -#define XCHAL_DTLB_SET1_WAY 4 /* index of first way in this way set */ -#define XCHAL_DTLB_SET1_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_DTLB_SET1_ENTRIES_LOG2 2 /* log2(number of entries in this way) */ -#define XCHAL_DTLB_SET1_ENTRIES 4 /* number of entries in this way (always a power of 2) */ -#define XCHAL_DTLB_SET1_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_DTLB_SET1_PAGESIZES 4 /* number of supported page sizes in this way */ -#define XCHAL_DTLB_SET1_PAGESZ_BITS 2 /* number of bits to encode the page size */ -#define XCHAL_DTLB_SET1_PAGESZ_LOG2_MIN 20 /* log2(minimum supported page size) */ -#define XCHAL_DTLB_SET1_PAGESZ_LOG2_MAX 26 /* log2(maximum supported page size) */ -#define XCHAL_DTLB_SET1_PAGESZ_LOG2_LIST 20 XCHAL_SEP 22 XCHAL_SEP 24 XCHAL_SEP 26 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_DTLB_SET1_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ -#define XCHAL_DTLB_SET1_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET1_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET1_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ -#define XCHAL_DTLB_SET1_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET1_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET1_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET1_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ - -/* DTLB way set 2 (group of ways 5 thru 5): */ -#define XCHAL_DTLB_SET2_WAY 5 /* index of first way in this way set */ -#define XCHAL_DTLB_SET2_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_DTLB_SET2_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ -#define XCHAL_DTLB_SET2_ENTRIES 2 /* number of entries in this way (always a power of 2) */ -#define XCHAL_DTLB_SET2_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_DTLB_SET2_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_DTLB_SET2_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_DTLB_SET2_PAGESZ_LOG2_MIN 27 /* log2(minimum supported page size) */ -#define XCHAL_DTLB_SET2_PAGESZ_LOG2_MAX 27 /* log2(maximum supported page size) */ -#define XCHAL_DTLB_SET2_PAGESZ_LOG2_LIST 27 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_DTLB_SET2_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ -#define XCHAL_DTLB_SET2_VPN_CONSTMASK 0xF0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET2_PPN_CONSTMASK 0xF8000000 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET2_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ -#define XCHAL_DTLB_SET2_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET2_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET2_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET2_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ -/* Constant ASID values for each entry of DTLB way set 2 (because ASID_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET2_E0_ASID_CONST 0x01 -#define XCHAL_DTLB_SET2_E1_ASID_CONST 0x01 -/* Constant VPN values for each entry of DTLB way set 2 (because VPN_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET2_E0_VPN_CONST 0xD0000000 -#define XCHAL_DTLB_SET2_E1_VPN_CONST 0xD8000000 -/* Constant PPN values for each entry of DTLB way set 2 (because PPN_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET2_E0_PPN_CONST 0x00000000 -#define XCHAL_DTLB_SET2_E1_PPN_CONST 0x00000000 -/* Constant CA values for each entry of DTLB way set 2 (because CA_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET2_E0_CA_CONST 0x07 -#define XCHAL_DTLB_SET2_E1_CA_CONST 0x03 - -/* DTLB way set 3 (group of ways 6 thru 6): */ -#define XCHAL_DTLB_SET3_WAY 6 /* index of first way in this way set */ -#define XCHAL_DTLB_SET3_WAYS 1 /* number of (contiguous) ways in this way set */ -#define XCHAL_DTLB_SET3_ENTRIES_LOG2 1 /* log2(number of entries in this way) */ -#define XCHAL_DTLB_SET3_ENTRIES 2 /* number of entries in this way (always a power of 2) */ -#define XCHAL_DTLB_SET3_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_DTLB_SET3_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_DTLB_SET3_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_DTLB_SET3_PAGESZ_LOG2_MIN 28 /* log2(minimum supported page size) */ -#define XCHAL_DTLB_SET3_PAGESZ_LOG2_MAX 28 /* log2(maximum supported page size) */ -#define XCHAL_DTLB_SET3_PAGESZ_LOG2_LIST 28 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_DTLB_SET3_ASID_CONSTMASK 0xFF /* constant ASID bits; 0 if all writable */ -#define XCHAL_DTLB_SET3_VPN_CONSTMASK 0xE0000000 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET3_PPN_CONSTMASK 0xF0000000 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET3_CA_CONSTMASK 0x0000000F /* constant CA bits; 0 if all writable */ -#define XCHAL_DTLB_SET3_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET3_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET3_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET3_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ -/* Constant ASID values for each entry of DTLB way set 3 (because ASID_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET3_E0_ASID_CONST 0x01 -#define XCHAL_DTLB_SET3_E1_ASID_CONST 0x01 -/* Constant VPN values for each entry of DTLB way set 3 (because VPN_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET3_E0_VPN_CONST 0xE0000000 -#define XCHAL_DTLB_SET3_E1_VPN_CONST 0xF0000000 -/* Constant PPN values for each entry of DTLB way set 3 (because PPN_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET3_E0_PPN_CONST 0xF0000000 -#define XCHAL_DTLB_SET3_E1_PPN_CONST 0xF0000000 -/* Constant CA values for each entry of DTLB way set 3 (because CA_CONSTMASK is non-zero): */ -#define XCHAL_DTLB_SET3_E0_CA_CONST 0x07 -#define XCHAL_DTLB_SET3_E1_CA_CONST 0x03 - -/* DTLB way set 4 (group of ways 7 thru 9): */ -#define XCHAL_DTLB_SET4_WAY 7 /* index of first way in this way set */ -#define XCHAL_DTLB_SET4_WAYS 3 /* number of (contiguous) ways in this way set */ -#define XCHAL_DTLB_SET4_ENTRIES_LOG2 0 /* log2(number of entries in this way) */ -#define XCHAL_DTLB_SET4_ENTRIES 1 /* number of entries in this way (always a power of 2) */ -#define XCHAL_DTLB_SET4_ARF 0 /* 1=autorefill by h/w, 0=non-autorefill (wired/constant/static) */ -#define XCHAL_DTLB_SET4_PAGESIZES 1 /* number of supported page sizes in this way */ -#define XCHAL_DTLB_SET4_PAGESZ_BITS 0 /* number of bits to encode the page size */ -#define XCHAL_DTLB_SET4_PAGESZ_LOG2_MIN 12 /* log2(minimum supported page size) */ -#define XCHAL_DTLB_SET4_PAGESZ_LOG2_MAX 12 /* log2(maximum supported page size) */ -#define XCHAL_DTLB_SET4_PAGESZ_LOG2_LIST 12 /* list of log2(page size)s, separated by XCHAL_SEP; - 2^PAGESZ_BITS entries in list, unsupported entries are zero */ -#define XCHAL_DTLB_SET4_ASID_CONSTMASK 0 /* constant ASID bits; 0 if all writable */ -#define XCHAL_DTLB_SET4_VPN_CONSTMASK 0 /* constant VPN bits, not including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET4_PPN_CONSTMASK 0 /* constant PPN bits, including entry index bits; 0 if all writable */ -#define XCHAL_DTLB_SET4_CA_CONSTMASK 0 /* constant CA bits; 0 if all writable */ -#define XCHAL_DTLB_SET4_ASID_RESET 0 /* 1 if ASID reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET4_VPN_RESET 0 /* 1 if VPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET4_PPN_RESET 0 /* 1 if PPN reset values defined (and all writable); 0 otherwise */ -#define XCHAL_DTLB_SET4_CA_RESET 0 /* 1 if CA reset values defined (and all writable); 0 otherwise */ - -/* Indexing macros: */ -#define _XCHAL_DTLB_SET(n,_what) XCHAL_DTLB_SET ## n ## _what -#define XCHAL_DTLB_SET(n,what) _XCHAL_DTLB_SET(n, _ ## what ) -#define _XCHAL_DTLB_SET_E(n,i,_what) XCHAL_DTLB_SET ## n ## _E ## i ## _what -#define XCHAL_DTLB_SET_E(n,i,what) _XCHAL_DTLB_SET_E(n,i, _ ## what ) -/* - * Example use: XCHAL_DTLB_SET(XCHAL_DTLB_ARF_SET0,ENTRIES) - * to get the value of XCHAL_DTLB_SET<n>_ENTRIES where <n> is the first auto-refill set. - */ - - -/* - * Determine whether we have a full MMU (with Page Table and Protection) - * usable for an MMU-based OS: - */ -#if XCHAL_HAVE_TLBS && !XCHAL_HAVE_SPANNING_WAY && XCHAL_ITLB_ARF_WAYS > 0 && XCHAL_DTLB_ARF_WAYS > 0 && XCHAL_MMU_RINGS >= 2 -# define XCHAL_HAVE_PTP_MMU 1 /* have full MMU (with page table [autorefill] and protection) */ -#else -# define XCHAL_HAVE_PTP_MMU 0 /* don't have full MMU */ -#endif - -/* - * For full MMUs, report kernel RAM segment and kernel I/O segment static page mappings: - */ -#if XCHAL_HAVE_PTP_MMU -#define XCHAL_KSEG_CACHED_VADDR 0xD0000000 /* virt.addr of kernel RAM cached static map */ -#define XCHAL_KSEG_CACHED_PADDR 0x00000000 /* phys.addr of kseg_cached */ -#define XCHAL_KSEG_CACHED_SIZE 0x08000000 /* size in bytes of kseg_cached (assumed power of 2!!!) */ -#define XCHAL_KSEG_BYPASS_VADDR 0xD8000000 /* virt.addr of kernel RAM bypass (uncached) static map */ -#define XCHAL_KSEG_BYPASS_PADDR 0x00000000 /* phys.addr of kseg_bypass */ -#define XCHAL_KSEG_BYPASS_SIZE 0x08000000 /* size in bytes of kseg_bypass (assumed power of 2!!!) */ - -#define XCHAL_KIO_CACHED_VADDR 0xE0000000 /* virt.addr of kernel I/O cached static map */ -#define XCHAL_KIO_CACHED_PADDR 0xF0000000 /* phys.addr of kio_cached */ -#define XCHAL_KIO_CACHED_SIZE 0x10000000 /* size in bytes of kio_cached (assumed power of 2!!!) */ -#define XCHAL_KIO_BYPASS_VADDR 0xF0000000 /* virt.addr of kernel I/O bypass (uncached) static map */ -#define XCHAL_KIO_BYPASS_PADDR 0xF0000000 /* phys.addr of kio_bypass */ -#define XCHAL_KIO_BYPASS_SIZE 0x10000000 /* size in bytes of kio_bypass (assumed power of 2!!!) */ - -#define XCHAL_SEG_MAPPABLE_VADDR 0x00000000 /* start of largest non-static-mapped virtual addr area */ -#define XCHAL_SEG_MAPPABLE_SIZE 0xD0000000 /* size in bytes of " */ -/* define XCHAL_SEG_MAPPABLE2_xxx if more areas present, sorted in order of descending size. */ -#endif - - -/*---------------------------------------------------------------------- - MISC - ----------------------------------------------------------------------*/ - -#define XCHAL_NUM_WRITEBUFFER_ENTRIES 4 /* number of write buffer entries */ - -#define XCHAL_CORE_ID "linux_be" /* configuration's alphanumeric core identifier - (CoreID) set in the Xtensa Processor Generator */ - -#define XCHAL_BUILD_UNIQUE_ID 0x00003256 /* software build-unique ID (22-bit) */ - -/* These definitions describe the hardware targeted by this software: */ -#define XCHAL_HW_CONFIGID0 0xC103D1FF /* config ID reg 0 value (upper 32 of 64 bits) */ -#define XCHAL_HW_CONFIGID1 0x00803256 /* config ID reg 1 value (lower 32 of 64 bits) */ -#define XCHAL_CONFIGID0 XCHAL_HW_CONFIGID0 /* for backward compatibility only -- don't use! */ -#define XCHAL_CONFIGID1 XCHAL_HW_CONFIGID1 /* for backward compatibility only -- don't use! */ -#define XCHAL_HW_RELEASE_MAJOR 1050 /* major release of targeted hardware */ -#define XCHAL_HW_RELEASE_MINOR 1 /* minor release of targeted hardware */ -#define XCHAL_HW_RELEASE_NAME "T1050.1" /* full release name of targeted hardware */ -#define XTHAL_HW_REL_T1050 1 -#define XTHAL_HW_REL_T1050_1 1 -#define XCHAL_HW_CONFIGID_RELIABLE 1 - - -/* - * Miscellaneous special register fields: - */ - - -/* DBREAKC (special register number 160): */ -#define XCHAL_DBREAKC_VALIDMASK 0xC000003F /* bits of DBREAKC that are defined */ -/* MASK field: */ -#define XCHAL_DBREAKC_MASK_BITS 6 /* number of bits in MASK field */ -#define XCHAL_DBREAKC_MASK_NUM 64 /* max number of possible causes (2^bits) */ -#define XCHAL_DBREAKC_MASK_SHIFT 0 /* position of MASK bits in DBREAKC, starting from lsbit */ -#define XCHAL_DBREAKC_MASK_MASK 0x0000003F /* mask of bits in MASK field of DBREAKC */ -/* LOADBREAK field: */ -#define XCHAL_DBREAKC_LOADBREAK_BITS 1 /* number of bits in LOADBREAK field */ -#define XCHAL_DBREAKC_LOADBREAK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DBREAKC_LOADBREAK_SHIFT 30 /* position of LOADBREAK bits in DBREAKC, starting from lsbit */ -#define XCHAL_DBREAKC_LOADBREAK_MASK 0x40000000 /* mask of bits in LOADBREAK field of DBREAKC */ -/* STOREBREAK field: */ -#define XCHAL_DBREAKC_STOREBREAK_BITS 1 /* number of bits in STOREBREAK field */ -#define XCHAL_DBREAKC_STOREBREAK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DBREAKC_STOREBREAK_SHIFT 31 /* position of STOREBREAK bits in DBREAKC, starting from lsbit */ -#define XCHAL_DBREAKC_STOREBREAK_MASK 0x80000000 /* mask of bits in STOREBREAK field of DBREAKC */ - -/* PS (special register number 230): */ -#define XCHAL_PS_VALIDMASK 0x00070FFF /* bits of PS that are defined */ -/* INTLEVEL field: */ -#define XCHAL_PS_INTLEVEL_BITS 4 /* number of bits in INTLEVEL field */ -#define XCHAL_PS_INTLEVEL_NUM 16 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_INTLEVEL_SHIFT 0 /* position of INTLEVEL bits in PS, starting from lsbit */ -#define XCHAL_PS_INTLEVEL_MASK 0x0000000F /* mask of bits in INTLEVEL field of PS */ -/* EXCM field: */ -#define XCHAL_PS_EXCM_BITS 1 /* number of bits in EXCM field */ -#define XCHAL_PS_EXCM_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_EXCM_SHIFT 4 /* position of EXCM bits in PS, starting from lsbit */ -#define XCHAL_PS_EXCM_MASK 0x00000010 /* mask of bits in EXCM field of PS */ -/* PROGSTACK field: */ -#define XCHAL_PS_PROGSTACK_BITS 1 /* number of bits in PROGSTACK field */ -#define XCHAL_PS_PROGSTACK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_PROGSTACK_SHIFT 5 /* position of PROGSTACK bits in PS, starting from lsbit */ -#define XCHAL_PS_PROGSTACK_MASK 0x00000020 /* mask of bits in PROGSTACK field of PS */ -/* RING field: */ -#define XCHAL_PS_RING_BITS 2 /* number of bits in RING field */ -#define XCHAL_PS_RING_NUM 4 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_RING_SHIFT 6 /* position of RING bits in PS, starting from lsbit */ -#define XCHAL_PS_RING_MASK 0x000000C0 /* mask of bits in RING field of PS */ -/* OWB field: */ -#define XCHAL_PS_OWB_BITS 4 /* number of bits in OWB field */ -#define XCHAL_PS_OWB_NUM 16 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_OWB_SHIFT 8 /* position of OWB bits in PS, starting from lsbit */ -#define XCHAL_PS_OWB_MASK 0x00000F00 /* mask of bits in OWB field of PS */ -/* CALLINC field: */ -#define XCHAL_PS_CALLINC_BITS 2 /* number of bits in CALLINC field */ -#define XCHAL_PS_CALLINC_NUM 4 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_CALLINC_SHIFT 16 /* position of CALLINC bits in PS, starting from lsbit */ -#define XCHAL_PS_CALLINC_MASK 0x00030000 /* mask of bits in CALLINC field of PS */ -/* WOE field: */ -#define XCHAL_PS_WOE_BITS 1 /* number of bits in WOE field */ -#define XCHAL_PS_WOE_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_PS_WOE_SHIFT 18 /* position of WOE bits in PS, starting from lsbit */ -#define XCHAL_PS_WOE_MASK 0x00040000 /* mask of bits in WOE field of PS */ - -/* EXCCAUSE (special register number 232): */ -#define XCHAL_EXCCAUSE_VALIDMASK 0x0000003F /* bits of EXCCAUSE that are defined */ -/* EXCCAUSE field: */ -#define XCHAL_EXCCAUSE_BITS 6 /* number of bits in EXCCAUSE register */ -#define XCHAL_EXCCAUSE_NUM 64 /* max number of possible causes (2^bits) */ -#define XCHAL_EXCCAUSE_SHIFT 0 /* position of EXCCAUSE bits in register, starting from lsbit */ -#define XCHAL_EXCCAUSE_MASK 0x0000003F /* mask of bits in EXCCAUSE register */ - -/* DEBUGCAUSE (special register number 233): */ -#define XCHAL_DEBUGCAUSE_VALIDMASK 0x0000003F /* bits of DEBUGCAUSE that are defined */ -/* ICOUNT field: */ -#define XCHAL_DEBUGCAUSE_ICOUNT_BITS 1 /* number of bits in ICOUNT field */ -#define XCHAL_DEBUGCAUSE_ICOUNT_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_ICOUNT_SHIFT 0 /* position of ICOUNT bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_ICOUNT_MASK 0x00000001 /* mask of bits in ICOUNT field of DEBUGCAUSE */ -/* IBREAK field: */ -#define XCHAL_DEBUGCAUSE_IBREAK_BITS 1 /* number of bits in IBREAK field */ -#define XCHAL_DEBUGCAUSE_IBREAK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_IBREAK_SHIFT 1 /* position of IBREAK bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_IBREAK_MASK 0x00000002 /* mask of bits in IBREAK field of DEBUGCAUSE */ -/* DBREAK field: */ -#define XCHAL_DEBUGCAUSE_DBREAK_BITS 1 /* number of bits in DBREAK field */ -#define XCHAL_DEBUGCAUSE_DBREAK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_DBREAK_SHIFT 2 /* position of DBREAK bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_DBREAK_MASK 0x00000004 /* mask of bits in DBREAK field of DEBUGCAUSE */ -/* BREAK field: */ -#define XCHAL_DEBUGCAUSE_BREAK_BITS 1 /* number of bits in BREAK field */ -#define XCHAL_DEBUGCAUSE_BREAK_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_BREAK_SHIFT 3 /* position of BREAK bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_BREAK_MASK 0x00000008 /* mask of bits in BREAK field of DEBUGCAUSE */ -/* BREAKN field: */ -#define XCHAL_DEBUGCAUSE_BREAKN_BITS 1 /* number of bits in BREAKN field */ -#define XCHAL_DEBUGCAUSE_BREAKN_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_BREAKN_SHIFT 4 /* position of BREAKN bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_BREAKN_MASK 0x00000010 /* mask of bits in BREAKN field of DEBUGCAUSE */ -/* DEBUGINT field: */ -#define XCHAL_DEBUGCAUSE_DEBUGINT_BITS 1 /* number of bits in DEBUGINT field */ -#define XCHAL_DEBUGCAUSE_DEBUGINT_NUM 2 /* max number of possible causes (2^bits) */ -#define XCHAL_DEBUGCAUSE_DEBUGINT_SHIFT 5 /* position of DEBUGINT bits in DEBUGCAUSE, starting from lsbit */ -#define XCHAL_DEBUGCAUSE_DEBUGINT_MASK 0x00000020 /* mask of bits in DEBUGINT field of DEBUGCAUSE */ - - - -/*---------------------------------------------------------------------- - ISA - ----------------------------------------------------------------------*/ - -#define XCHAL_HAVE_DENSITY 1 /* 1 if density option configured, 0 otherwise */ -#define XCHAL_HAVE_LOOPS 1 /* 1 if zero-overhead loops option configured, 0 otherwise */ -/* Misc instructions: */ -#define XCHAL_HAVE_NSA 0 /* 1 if NSA/NSAU instructions option configured, 0 otherwise */ -#define XCHAL_HAVE_MINMAX 0 /* 1 if MIN/MAX instructions option configured, 0 otherwise */ -#define XCHAL_HAVE_SEXT 0 /* 1 if sign-extend instruction option configured, 0 otherwise */ -#define XCHAL_HAVE_CLAMPS 0 /* 1 if CLAMPS instruction option configured, 0 otherwise */ -#define XCHAL_HAVE_MAC16 0 /* 1 if MAC16 option configured, 0 otherwise */ -#define XCHAL_HAVE_MUL16 0 /* 1 if 16-bit integer multiply option configured, 0 otherwise */ -/*#define XCHAL_HAVE_POPC 0*/ /* 1 if CRC instruction option configured, 0 otherwise */ -/*#define XCHAL_HAVE_CRC 0*/ /* 1 if POPC instruction option configured, 0 otherwise */ - -#define XCHAL_HAVE_SPECULATION 0 /* 1 if speculation option configured, 0 otherwise */ -/*#define XCHAL_HAVE_MP_SYNC 0*/ /* 1 if multiprocessor sync. option configured, 0 otherwise */ -#define XCHAL_HAVE_PRID 0 /* 1 if processor ID register configured, 0 otherwise */ - -#define XCHAL_NUM_MISC_REGS 2 /* number of miscellaneous registers (0..4) */ - -/* These relate a bit more to TIE: */ -#define XCHAL_HAVE_BOOLEANS 0 /* 1 if booleans option configured, 0 otherwise */ -#define XCHAL_HAVE_MUL32 0 /* 1 if 32-bit integer multiply option configured, 0 otherwise */ -#define XCHAL_HAVE_MUL32_HIGH 0 /* 1 if MUL32 option includes MULUH and MULSH, 0 otherwise */ -#define XCHAL_HAVE_FP 0 /* 1 if floating point option configured, 0 otherwise */ - - -/*---------------------------------------------------------------------- - DERIVED - ----------------------------------------------------------------------*/ - -#if XCHAL_HAVE_BE -#define XCHAL_INST_ILLN 0xD60F /* 2-byte illegal instruction, msb-first */ -#define XCHAL_INST_ILLN_BYTE0 0xD6 /* 2-byte illegal instruction, 1st byte */ -#define XCHAL_INST_ILLN_BYTE1 0x0F /* 2-byte illegal instruction, 2nd byte */ -#else -#define XCHAL_INST_ILLN 0xF06D /* 2-byte illegal instruction, lsb-first */ -#define XCHAL_INST_ILLN_BYTE0 0x6D /* 2-byte illegal instruction, 1st byte */ -#define XCHAL_INST_ILLN_BYTE1 0xF0 /* 2-byte illegal instruction, 2nd byte */ -#endif -/* Belongs in xtensa/hal.h: */ -#define XTHAL_INST_ILL 0x000000 /* 3-byte illegal instruction */ - - -/* - * Because information as to exactly which hardware release is targeted - * by a given software build is not always available, compile-time HAL - * Hardware-Release "_AT" macros are fuzzy (return 0, 1, or XCHAL_MAYBE): - */ -#ifndef XCHAL_HW_RELEASE_MAJOR -# define XCHAL_HW_CONFIGID_RELIABLE 0 -#endif -#if XCHAL_HW_CONFIGID_RELIABLE -# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) (XTHAL_REL_LE( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) -# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) (XTHAL_REL_GE( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) -# define XCHAL_HW_RELEASE_AT(major,minor) (XTHAL_REL_EQ( XCHAL_HW_RELEASE_MAJOR,XCHAL_HW_RELEASE_MINOR, major,minor ) ? 1 : 0) -# define XCHAL_HW_RELEASE_MAJOR_AT(major) ((XCHAL_HW_RELEASE_MAJOR == (major)) ? 1 : 0) -#else -# define XCHAL_HW_RELEASE_AT_OR_BELOW(major,minor) ( ((major) < 1040 && XCHAL_HAVE_XEA2) ? 0 \ - : ((major) > 1050 && XCHAL_HAVE_XEA1) ? 1 \ - : XTHAL_MAYBE ) -# define XCHAL_HW_RELEASE_AT_OR_ABOVE(major,minor) ( ((major) >= 2000 && XCHAL_HAVE_XEA1) ? 0 \ - : (XTHAL_REL_LE(major,minor, 1040,0) && XCHAL_HAVE_XEA2) ? 1 \ - : XTHAL_MAYBE ) -# define XCHAL_HW_RELEASE_AT(major,minor) ( (((major) < 1040 && XCHAL_HAVE_XEA2) || \ - ((major) >= 2000 && XCHAL_HAVE_XEA1)) ? 0 : XTHAL_MAYBE) -# define XCHAL_HW_RELEASE_MAJOR_AT(major) XCHAL_HW_RELEASE_AT(major,0) -#endif - -/* - * Specific errata: - */ - -/* - * Erratum T1020.H13, T1030.H7, T1040.H10, T1050.H4 (fixed in T1040.3 and T1050.1; - * relevant only in XEA1, kernel-vector mode, level-one interrupts and overflows enabled): - */ -#define XCHAL_MAYHAVE_ERRATUM_XEA1KWIN (XCHAL_HAVE_XEA1 && \ - (XCHAL_HW_RELEASE_AT_OR_BELOW(1040,2) != 0 \ - || XCHAL_HW_RELEASE_AT(1050,0))) - - - -#endif /*XTENSA_CONFIG_CORE_H*/ - diff --git a/include/asm-xtensa/xtensa/config-linux_be/defs.h b/include/asm-xtensa/xtensa/config-linux_be/defs.h deleted file mode 100644 index f7c58b27337..00000000000 --- a/include/asm-xtensa/xtensa/config-linux_be/defs.h +++ /dev/null @@ -1,270 +0,0 @@ -/* Definitions for Xtensa instructions, types, and protos. */ - -/* - * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - -/* Do not modify. This is automatically generated.*/ - -#ifndef _XTENSA_BASE_HEADER -#define _XTENSA_BASE_HEADER - -#ifdef __XTENSA__ -#if defined(__GNUC__) && !defined(__XCC__) - -#define L8UI_ASM(arr, ars, imm) { \ - __asm__ volatile("l8ui %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ -} - -#define XT_L8UI(ars, imm) \ -({ \ - unsigned char _arr; \ - const unsigned char *_ars = ars; \ - L8UI_ASM(_arr, _ars, imm); \ - _arr; \ -}) - -#define L16UI_ASM(arr, ars, imm) { \ - __asm__ volatile("l16ui %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ -} - -#define XT_L16UI(ars, imm) \ -({ \ - unsigned short _arr; \ - const unsigned short *_ars = ars; \ - L16UI_ASM(_arr, _ars, imm); \ - _arr; \ -}) - -#define L16SI_ASM(arr, ars, imm) {\ - __asm__ volatile("l16si %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ -} - -#define XT_L16SI(ars, imm) \ -({ \ - signed short _arr; \ - const signed short *_ars = ars; \ - L16SI_ASM(_arr, _ars, imm); \ - _arr; \ -}) - -#define L32I_ASM(arr, ars, imm) { \ - __asm__ volatile("l32i %0, %1, %2" : "=a" (arr) : "a" (ars) , "i" (imm)); \ -} - -#define XT_L32I(ars, imm) \ -({ \ - unsigned _arr; \ - const unsigned *_ars = ars; \ - L32I_ASM(_arr, _ars, imm); \ - _arr; \ -}) - -#define S8I_ASM(arr, ars, imm) {\ - __asm__ volatile("s8i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ -} - -#define XT_S8I(arr, ars, imm) \ -({ \ - signed char _arr = arr; \ - const signed char *_ars = ars; \ - S8I_ASM(_arr, _ars, imm); \ -}) - -#define S16I_ASM(arr, ars, imm) {\ - __asm__ volatile("s16i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ -} - -#define XT_S16I(arr, ars, imm) \ -({ \ - signed short _arr = arr; \ - const signed short *_ars = ars; \ - S16I_ASM(_arr, _ars, imm); \ -}) - -#define S32I_ASM(arr, ars, imm) { \ - __asm__ volatile("s32i %0, %1, %2" : : "a" (arr), "a" (ars) , "i" (imm) : "memory" ); \ -} - -#define XT_S32I(arr, ars, imm) \ -({ \ - signed int _arr = arr; \ - const signed int *_ars = ars; \ - S32I_ASM(_arr, _ars, imm); \ -}) - -#define ADDI_ASM(art, ars, imm) {\ - __asm__ ("addi %0, %1, %2" : "=a" (art) : "a" (ars), "i" (imm)); \ -} - -#define XT_ADDI(ars, imm) \ -({ \ - unsigned _art; \ - unsigned _ars = ars; \ - ADDI_ASM(_art, _ars, imm); \ - _art; \ -}) - -#define ABS_ASM(arr, art) {\ - __asm__ ("abs %0, %1" : "=a" (arr) : "a" (art)); \ -} - -#define XT_ABS(art) \ -({ \ - unsigned _arr; \ - signed _art = art; \ - ABS_ASM(_arr, _art); \ - _arr; \ -}) - -/* Note: In the following macros that reference SAR, the magic "state" - register is used to capture the dependency on SAR. This is because - SAR is a 5-bit register and thus there are no C types that can be - used to represent it. It doesn't appear that the SAR register is - even relevant to GCC, but it is marked as "clobbered" just in - case. */ - -#define SRC_ASM(arr, ars, art) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("src %0, %1, %2" \ - : "=a" (arr) : "a" (ars), "a" (art), "t" (_xt_sar)); \ -} - -#define XT_SRC(ars, art) \ -({ \ - unsigned _arr; \ - unsigned _ars = ars; \ - unsigned _art = art; \ - SRC_ASM(_arr, _ars, _art); \ - _arr; \ -}) - -#define SSR_ASM(ars) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("ssr %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ -} - -#define XT_SSR(ars) \ -({ \ - unsigned _ars = ars; \ - SSR_ASM(_ars); \ -}) - -#define SSL_ASM(ars) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("ssl %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ -} - -#define XT_SSL(ars) \ -({ \ - unsigned _ars = ars; \ - SSL_ASM(_ars); \ -}) - -#define SSA8B_ASM(ars) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("ssa8b %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ -} - -#define XT_SSA8B(ars) \ -({ \ - unsigned _ars = ars; \ - SSA8B_ASM(_ars); \ -}) - -#define SSA8L_ASM(ars) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("ssa8l %1" : "=t" (_xt_sar) : "a" (ars) : "sar"); \ -} - -#define XT_SSA8L(ars) \ -({ \ - unsigned _ars = ars; \ - SSA8L_ASM(_ars); \ -}) - -#define SSAI_ASM(imm) {\ - register int _xt_sar __asm__ ("state"); \ - __asm__ ("ssai %1" : "=t" (_xt_sar) : "i" (imm) : "sar"); \ -} - -#define XT_SSAI(imm) \ -({ \ - SSAI_ASM(imm); \ -}) - - - - - - - - -#endif /* __GNUC__ && !__XCC__ */ - -#ifdef __XCC__ - -/* Core load/store instructions */ -extern unsigned char _TIE_L8UI(const unsigned char * ars, immediate imm); -extern unsigned short _TIE_L16UI(const unsigned short * ars, immediate imm); -extern signed short _TIE_L16SI(const signed short * ars, immediate imm); -extern unsigned _TIE_L32I(const unsigned * ars, immediate imm); -extern void _TIE_S8I(unsigned char arr, unsigned char * ars, immediate imm); -extern void _TIE_S16I(unsigned short arr, unsigned short * ars, immediate imm); -extern void _TIE_S32I(unsigned arr, unsigned * ars, immediate imm); - -#define XT_L8UI _TIE_L8UI -#define XT_L16UI _TIE_L16UI -#define XT_L16SI _TIE_L16SI -#define XT_L32I _TIE_L32I -#define XT_S8I _TIE_S8I -#define XT_S16I _TIE_S16I -#define XT_S32I _TIE_S32I - -/* Add-immediate instruction */ -extern unsigned _TIE_ADDI(unsigned ars, immediate imm); -#define XT_ADDI _TIE_ADDI - -/* Absolute value instruction */ -extern unsigned _TIE_ABS(int art); -#define XT_ABS _TIE_ABS - -/* funnel shift instructions */ -extern unsigned _TIE_SRC(unsigned ars, unsigned art); -#define XT_SRC _TIE_SRC -extern void _TIE_SSR(unsigned ars); -#define XT_SSR _TIE_SSR -extern void _TIE_SSL(unsigned ars); -#define XT_SSL _TIE_SSL -extern void _TIE_SSA8B(unsigned ars); -#define XT_SSA8B _TIE_SSA8B -extern void _TIE_SSA8L(unsigned ars); -#define XT_SSA8L _TIE_SSA8L -extern void _TIE_SSAI(immediate imm); -#define XT_SSAI _TIE_SSAI - - -#endif /* __XCC__ */ - -#endif /* __XTENSA__ */ -#endif /* !_XTENSA_BASE_HEADER */ diff --git a/include/asm-xtensa/xtensa/config-linux_be/specreg.h b/include/asm-xtensa/xtensa/config-linux_be/specreg.h deleted file mode 100644 index fa4106aa9a0..00000000000 --- a/include/asm-xtensa/xtensa/config-linux_be/specreg.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Xtensa Special Register symbolic names - */ - -/* $Id: specreg.h,v 1.2 2003/03/07 19:15:18 joetaylor Exp $ */ - -/* - * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - -#ifndef XTENSA_SPECREG_H -#define XTENSA_SPECREG_H - -/* Include these special register bitfield definitions, for historical reasons: */ -#include <xtensa/corebits.h> - - -/* Special registers: */ -#define LBEG 0 -#define LEND 1 -#define LCOUNT 2 -#define SAR 3 -#define WINDOWBASE 72 -#define WINDOWSTART 73 -#define PTEVADDR 83 -#define RASID 90 -#define ITLBCFG 91 -#define DTLBCFG 92 -#define IBREAKENABLE 96 -#define DDR 104 -#define IBREAKA_0 128 -#define IBREAKA_1 129 -#define DBREAKA_0 144 -#define DBREAKA_1 145 -#define DBREAKC_0 160 -#define DBREAKC_1 161 -#define EPC_1 177 -#define EPC_2 178 -#define EPC_3 179 -#define EPC_4 180 -#define DEPC 192 -#define EPS_2 194 -#define EPS_3 195 -#define EPS_4 196 -#define EXCSAVE_1 209 -#define EXCSAVE_2 210 -#define EXCSAVE_3 211 -#define EXCSAVE_4 212 -#define INTERRUPT 226 -#define INTENABLE 228 -#define PS 230 -#define EXCCAUSE 232 -#define DEBUGCAUSE 233 -#define CCOUNT 234 -#define ICOUNT 236 -#define ICOUNTLEVEL 237 -#define EXCVADDR 238 -#define CCOMPARE_0 240 -#define CCOMPARE_1 241 -#define CCOMPARE_2 242 -#define MISC_REG_0 244 -#define MISC_REG_1 245 - -/* Special cases (bases of special register series): */ -#define IBREAKA 128 -#define DBREAKA 144 -#define DBREAKC 160 -#define EPC 176 -#define EPS 192 -#define EXCSAVE 208 -#define CCOMPARE 240 - -/* Special names for read-only and write-only interrupt registers: */ -#define INTREAD 226 -#define INTSET 226 -#define INTCLEAR 227 - -#endif /* XTENSA_SPECREG_H */ - diff --git a/include/asm-xtensa/xtensa/config-linux_be/system.h b/include/asm-xtensa/xtensa/config-linux_be/system.h deleted file mode 100644 index cf9d4d308e3..00000000000 --- a/include/asm-xtensa/xtensa/config-linux_be/system.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * xtensa/config/system.h -- HAL definitions that are dependent on SYSTEM configuration - * - * NOTE: The location and contents of this file are highly subject to change. - * - * Source for configuration-independent binaries (which link in a - * configuration-specific HAL library) must NEVER include this file. - * The HAL itself has historically included this file in some instances, - * but this is not appropriate either, because the HAL is meant to be - * core-specific but system independent. - */ - -/* - * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - - -#ifndef XTENSA_CONFIG_SYSTEM_H -#define XTENSA_CONFIG_SYSTEM_H - -/*#include <xtensa/hal.h>*/ - - - -/*---------------------------------------------------------------------- - DEVICE ADDRESSES - ----------------------------------------------------------------------*/ - -/* - * Strange place to find these, but the configuration GUI - * allows moving these around to account for various core - * configurations. Specific boards (and their BSP software) - * will have specific meanings for these components. - */ - -/* I/O Block areas: */ -#define XSHAL_IOBLOCK_CACHED_VADDR 0xE0000000 -#define XSHAL_IOBLOCK_CACHED_PADDR 0xF0000000 -#define XSHAL_IOBLOCK_CACHED_SIZE 0x0E000000 - -#define XSHAL_IOBLOCK_BYPASS_VADDR 0xF0000000 -#define XSHAL_IOBLOCK_BYPASS_PADDR 0xF0000000 -#define XSHAL_IOBLOCK_BYPASS_SIZE 0x0E000000 - -/* System ROM: */ -#define XSHAL_ROM_VADDR 0xEE000000 -#define XSHAL_ROM_PADDR 0xFE000000 -#define XSHAL_ROM_SIZE 0x00400000 -/* Largest available area (free of vectors): */ -#define XSHAL_ROM_AVAIL_VADDR 0xEE00052C -#define XSHAL_ROM_AVAIL_VSIZE 0x003FFAD4 - -/* System RAM: */ -#define XSHAL_RAM_VADDR 0xD0000000 -#define XSHAL_RAM_PADDR 0x00000000 -#define XSHAL_RAM_VSIZE 0x08000000 -#define XSHAL_RAM_PSIZE 0x10000000 -#define XSHAL_RAM_SIZE XSHAL_RAM_PSIZE -/* Largest available area (free of vectors): */ -#define XSHAL_RAM_AVAIL_VADDR 0xD0000370 -#define XSHAL_RAM_AVAIL_VSIZE 0x07FFFC90 - -/* - * Shadow system RAM (same device as system RAM, at different address). - * (Emulation boards need this for the SONIC Ethernet driver - * when data caches are configured for writeback mode.) - * NOTE: on full MMU configs, this points to the BYPASS virtual address - * of system RAM, ie. is the same as XSHAL_RAM_* except that virtual - * addresses are viewed through the BYPASS static map rather than - * the CACHED static map. - */ -#define XSHAL_RAM_BYPASS_VADDR 0xD8000000 -#define XSHAL_RAM_BYPASS_PADDR 0x00000000 -#define XSHAL_RAM_BYPASS_PSIZE 0x08000000 - -/* Alternate system RAM (different device than system RAM): */ -#define XSHAL_ALTRAM_VADDR 0xCEE00000 -#define XSHAL_ALTRAM_PADDR 0xC0000000 -#define XSHAL_ALTRAM_SIZE 0x00200000 - - -/*---------------------------------------------------------------------- - * DEVICE-ADDRESS DEPENDENT... - * - * Values written to CACHEATTR special register (or its equivalent) - * to enable and disable caches in various modes. - *----------------------------------------------------------------------*/ - -/*---------------------------------------------------------------------- - BACKWARD COMPATIBILITY ... - ----------------------------------------------------------------------*/ - -/* - * NOTE: the following two macros are DEPRECATED. Use the latter - * board-specific macros instead, which are specially tuned for the - * particular target environments' memory maps. - */ -#define XSHAL_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS /* disable caches in bypass mode */ -#define XSHAL_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT /* default setting to enable caches (no writeback!) */ - -/*---------------------------------------------------------------------- - ISS (Instruction Set Simulator) SPECIFIC ... - ----------------------------------------------------------------------*/ - -#define XSHAL_ISS_CACHEATTR_WRITEBACK 0x1122222F /* enable caches in write-back mode */ -#define XSHAL_ISS_CACHEATTR_WRITEALLOC 0x1122222F /* enable caches in write-allocate mode */ -#define XSHAL_ISS_CACHEATTR_WRITETHRU 0x1122222F /* enable caches in write-through mode */ -#define XSHAL_ISS_CACHEATTR_BYPASS 0x2222222F /* disable caches in bypass mode */ -#define XSHAL_ISS_CACHEATTR_DEFAULT XSHAL_ISS_CACHEATTR_WRITEBACK /* default setting to enable caches */ - -/* For Coware only: */ -#define XSHAL_COWARE_CACHEATTR_WRITEBACK 0x11222222 /* enable caches in write-back mode */ -#define XSHAL_COWARE_CACHEATTR_WRITEALLOC 0x11222222 /* enable caches in write-allocate mode */ -#define XSHAL_COWARE_CACHEATTR_WRITETHRU 0x11222222 /* enable caches in write-through mode */ -#define XSHAL_COWARE_CACHEATTR_BYPASS 0x22222222 /* disable caches in bypass mode */ -#define XSHAL_COWARE_CACHEATTR_DEFAULT XSHAL_COWARE_CACHEATTR_WRITEBACK /* default setting to enable caches */ - -/* For BFM and other purposes: */ -#define XSHAL_ALLVALID_CACHEATTR_WRITEBACK 0x11222222 /* enable caches without any invalid regions */ -#define XSHAL_ALLVALID_CACHEATTR_DEFAULT XSHAL_ALLVALID_CACHEATTR_WRITEBACK /* default setting for caches without any invalid regions */ - -#define XSHAL_ISS_PIPE_REGIONS 0 -#define XSHAL_ISS_SDRAM_REGIONS 0 - - -/*---------------------------------------------------------------------- - XT2000 BOARD SPECIFIC ... - ----------------------------------------------------------------------*/ - -#define XSHAL_XT2000_CACHEATTR_WRITEBACK 0x22FFFFFF /* enable caches in write-back mode */ -#define XSHAL_XT2000_CACHEATTR_WRITEALLOC 0x22FFFFFF /* enable caches in write-allocate mode */ -#define XSHAL_XT2000_CACHEATTR_WRITETHRU 0x22FFFFFF /* enable caches in write-through mode */ -#define XSHAL_XT2000_CACHEATTR_BYPASS 0x22FFFFFF /* disable caches in bypass mode */ -#define XSHAL_XT2000_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_WRITEBACK /* default setting to enable caches */ - -#define XSHAL_XT2000_PIPE_REGIONS 0x00001000 /* BusInt pipeline regions */ -#define XSHAL_XT2000_SDRAM_REGIONS 0x00000005 /* BusInt SDRAM regions */ - - -/*---------------------------------------------------------------------- - VECTOR SIZES - ----------------------------------------------------------------------*/ - -/* - * Sizes allocated to vectors by the system (memory map) configuration. - * These sizes are constrained by core configuration (eg. one vector's - * code cannot overflow into another vector) but are dependent on the - * system or board (or LSP) memory map configuration. - * - * Whether or not each vector happens to be in a system ROM is also - * a system configuration matter, sometimes useful, included here also: - */ -#define XSHAL_RESET_VECTOR_SIZE 0x000004E0 -#define XSHAL_RESET_VECTOR_ISROM 1 -#define XSHAL_USER_VECTOR_SIZE 0x0000001C -#define XSHAL_USER_VECTOR_ISROM 0 -#define XSHAL_PROGRAMEXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_USEREXC_VECTOR_SIZE XSHAL_USER_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_KERNEL_VECTOR_SIZE 0x0000001C -#define XSHAL_KERNEL_VECTOR_ISROM 0 -#define XSHAL_STACKEDEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_KERNELEXC_VECTOR_SIZE XSHAL_KERNEL_VECTOR_SIZE /* for backward compatibility */ -#define XSHAL_DOUBLEEXC_VECTOR_SIZE 0x000000E0 -#define XSHAL_DOUBLEEXC_VECTOR_ISROM 0 -#define XSHAL_WINDOW_VECTORS_SIZE 0x00000180 -#define XSHAL_WINDOW_VECTORS_ISROM 0 -#define XSHAL_INTLEVEL2_VECTOR_SIZE 0x0000000C -#define XSHAL_INTLEVEL2_VECTOR_ISROM 0 -#define XSHAL_INTLEVEL3_VECTOR_SIZE 0x0000000C -#define XSHAL_INTLEVEL3_VECTOR_ISROM 0 -#define XSHAL_INTLEVEL4_VECTOR_SIZE 0x0000000C -#define XSHAL_INTLEVEL4_VECTOR_ISROM 1 -#define XSHAL_DEBUG_VECTOR_SIZE XSHAL_INTLEVEL4_VECTOR_SIZE -#define XSHAL_DEBUG_VECTOR_ISROM XSHAL_INTLEVEL4_VECTOR_ISROM - - -#endif /*XTENSA_CONFIG_SYSTEM_H*/ - diff --git a/include/asm-xtensa/xtensa/config-linux_be/tie.h b/include/asm-xtensa/xtensa/config-linux_be/tie.h deleted file mode 100644 index 3c2e514602f..00000000000 --- a/include/asm-xtensa/xtensa/config-linux_be/tie.h +++ /dev/null @@ -1,275 +0,0 @@ -/* - * xtensa/config/tie.h -- HAL definitions that are dependent on CORE and TIE configuration - * - * This header file is sometimes referred to as the "compile-time HAL" or CHAL. - * It was generated for a specific Xtensa processor configuration, - * and furthermore for a specific set of TIE source files that extend - * basic core functionality. - * - * Source for configuration-independent binaries (which link in a - * configuration-specific HAL library) must NEVER include this file. - * It is perfectly normal, however, for the HAL source itself to include this file. - */ - -/* - * Copyright (c) 2003 Tensilica, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2.1 of the GNU Lesser General Public - * License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, - * USA. - */ - - -#ifndef XTENSA_CONFIG_TIE_H -#define XTENSA_CONFIG_TIE_H - -#include <xtensa/hal.h> - - -/*---------------------------------------------------------------------- - GENERAL - ----------------------------------------------------------------------*/ - -/* - * Separators for macros that expand into arrays. - * These can be predefined by files that #include this one, - * when different separators are required. - */ -/* Element separator for macros that expand into 1-dimensional arrays: */ -#ifndef XCHAL_SEP -#define XCHAL_SEP , -#endif -/* Array separator for macros that expand into 2-dimensional arrays: */ -#ifndef XCHAL_SEP2 -#define XCHAL_SEP2 },{ -#endif - - - - - - -/*---------------------------------------------------------------------- - COPROCESSORS and EXTRA STATE - ----------------------------------------------------------------------*/ - -#define XCHAL_CP_NUM 0 /* number of coprocessors */ -#define XCHAL_CP_MAX 0 /* max coprocessor id plus one (0 if none) */ -#define XCHAL_CP_MASK 0x00 /* bitmask of coprocessors by id */ - -/* Space for coprocessors' state save areas: */ -#define XCHAL_CP0_SA_SIZE 0 -#define XCHAL_CP1_SA_SIZE 0 -#define XCHAL_CP2_SA_SIZE 0 -#define XCHAL_CP3_SA_SIZE 0 -#define XCHAL_CP4_SA_SIZE 0 -#define XCHAL_CP5_SA_SIZE 0 -#define XCHAL_CP6_SA_SIZE 0 -#define XCHAL_CP7_SA_SIZE 0 -/* Minimum required alignments of CP state save areas: */ -#define XCHAL_CP0_SA_ALIGN 1 -#define XCHAL_CP1_SA_ALIGN 1 -#define XCHAL_CP2_SA_ALIGN 1 -#define XCHAL_CP3_SA_ALIGN 1 -#define XCHAL_CP4_SA_ALIGN 1 -#define XCHAL_CP5_SA_ALIGN 1 -#define XCHAL_CP6_SA_ALIGN 1 -#define XCHAL_CP7_SA_ALIGN 1 - -/* Indexing macros: */ -#define _XCHAL_CP_SA_SIZE(n) XCHAL_CP ## n ## _SA_SIZE -#define XCHAL_CP_SA_SIZE(n) _XCHAL_CP_SA_SIZE(n) /* n = 0 .. 7 */ -#define _XCHAL_CP_SA_ALIGN(n) XCHAL_CP ## n ## _SA_ALIGN -#define XCHAL_CP_SA_ALIGN(n) _XCHAL_CP_SA_ALIGN(n) /* n = 0 .. 7 */ - - -/* Space for "extra" state (user special registers and non-cp TIE) save area: */ -#define XCHAL_EXTRA_SA_SIZE 0 -#define XCHAL_EXTRA_SA_ALIGN 1 - -/* Total save area size (extra + all coprocessors) */ -/* (not useful until xthal_{save,restore}_all_extra() is implemented, */ -/* but included for Tor2 beta; doesn't account for alignment!): */ -#define XCHAL_CPEXTRA_SA_SIZE_TOR2 0 /* Tor2Beta temporary definition -- do not use */ - -/* Combined required alignment for all CP and EXTRA state save areas */ -/* (does not include required alignment for any base config registers): */ -#define XCHAL_CPEXTRA_SA_ALIGN 1 - -/* ... */ - - -#ifdef _ASMLANGUAGE -/* - * Assembly-language specific definitions (assembly macros, etc.). - */ -#include <xtensa/config/specreg.h> - -/******************** - * Macros to save and restore the non-coprocessor TIE portion of EXTRA state. - */ - -/* (none) */ - - -/******************** - * Macros to create functions that save and restore all EXTRA (non-coprocessor) state - * (does not include zero-overhead loop registers and non-optional registers). - */ - - /* - * Macro that expands to the body of a function that - * stores the extra (non-coprocessor) optional/custom state. - * Entry: a2 = ptr to save area in which to save extra state - * Exit: any register a2-a15 (?) may have been clobbered. - */ - .macro xchal_extra_store_funcbody - .endm - - - /* - * Macro that expands to the body of a function that - * loads the extra (non-coprocessor) optional/custom state. - * Entry: a2 = ptr to save area from which to restore extra state - * Exit: any register a2-a15 (?) may have been clobbered. - */ - .macro xchal_extra_load_funcbody - .endm - - -/******************** - * Macros to save and restore the state of each TIE coprocessor. - */ - - - -/******************** - * Macros to create functions that save and restore the state of *any* TIE coprocessor. - */ - - /* - * Macro that expands to the body of a function - * that stores the selected coprocessor's state (registers etc). - * Entry: a2 = ptr to save area in which to save cp state - * a3 = coprocessor number - * Exit: any register a2-a15 (?) may have been clobbered. - */ - .macro xchal_cpi_store_funcbody - .endm - - - /* - * Macro that expands to the body of a function - * that loads the selected coprocessor's state (registers etc). - * Entry: a2 = ptr to save area from which to restore cp state - * a3 = coprocessor number - * Exit: any register a2-a15 (?) may have been clobbered. - */ - .macro xchal_cpi_load_funcbody - .endm - -#endif /*_ASMLANGUAGE*/ - - -/* - * Contents of save areas in terms of libdb register numbers. - * NOTE: CONTENTS_LIBDB_{UREG,REGF} macros are not defined in this file; - * it is up to the user of this header file to define these macros - * usefully before each expansion of the CONTENTS_LIBDB macros. - * (Fields rsv[123] are reserved for future additions; they are currently - * set to zero but may be set to some useful values in the future.) - * - * CONTENTS_LIBDB_SREG(libdbnum, offset, size, align, rsv1, name, sregnum, bitmask, rsv2, rsv3) - * CONTENTS_LIBDB_UREG(libdbnum, offset, size, align, rsv1, name, uregnum, bitmask, rsv2, rsv3) - * CONTENTS_LIBDB_REGF(libdbnum, offset, size, align, rsv1, name, index, numentries, contentsize, regname_base, regfile_name, rsv2, rsv3) - */ - -#define XCHAL_EXTRA_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_EXTRA_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP0_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP0_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP1_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP1_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP2_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP2_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP3_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP3_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP4_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP4_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP5_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP5_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP6_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP6_SA_CONTENTS_LIBDB /* empty */ - -#define XCHAL_CP7_SA_CONTENTS_LIBDB_NUM 0 -#define XCHAL_CP7_SA_CONTENTS_LIBDB /* empty */ - - - - - - -/*---------------------------------------------------------------------- - MISC - ----------------------------------------------------------------------*/ - -#if 0 /* is there something equivalent for user TIE? */ -#define XCHAL_CORE_ID "linux_be" /* configuration's alphanumeric core identifier - (CoreID) set in the Xtensa Processor Generator */ - -#define XCHAL_BUILD_UNIQUE_ID 0x00003256 /* software build-unique ID (22-bit) */ - -/* These definitions describe the hardware targeted by this software: */ -#define XCHAL_HW_CONFIGID0 0xC103D1FF /* config ID reg 0 value (upper 32 of 64 bits) */ -#define XCHAL_HW_CONFIGID1 0x00803256 /* config ID reg 1 value (lower 32 of 64 bits) */ -#define XCHAL_CONFIGID0 XCHAL_HW_CONFIGID0 /* for backward compatibility only -- don't use! */ -#define XCHAL_CONFIGID1 XCHAL_HW_CONFIGID1 /* for backward compatibility only -- don't use! */ -#define XCHAL_HW_RELEASE_MAJOR 1050 /* major release of targeted hardware */ -#define XCHAL_HW_RELEASE_MINOR 1 /* minor release of targeted hardware */ -#define XCHAL_HW_RELEASE_NAME "T1050.1" /* full release name of targeted hardware */ -#define XTHAL_HW_REL_T1050 1 -#define XTHAL_HW_REL_T1050_1 1 -#define XCHAL_HW_CONFIGID_RELIABLE 1 -#endif /*0*/ - - - -/*---------------------------------------------------------------------- - ISA - ----------------------------------------------------------------------*/ - -#if 0 /* these probably don't belong here, but are related to or implemented using TIE */ -#define XCHAL_HAVE_BOOLEANS 0 /* 1 if booleans option configured, 0 otherwise */ -/* Misc instructions: */ -#define XCHAL_HAVE_MUL32 0 /* 1 if 32-bit integer multiply option configured, 0 otherwise */ -#define XCHAL_HAVE_MUL32_HIGH 0 /* 1 if MUL32 option includes MULUH and MULSH, 0 otherwise */ - -#define XCHAL_HAVE_FP 0 /* 1 if floating point option configured, 0 otherwise */ -#endif /*0*/ - - -#endif /*XTENSA_CONFIG_TIE_H*/ - diff --git a/include/asm-xtensa/xtensa/coreasm.h b/include/asm-xtensa/xtensa/coreasm.h deleted file mode 100644 index a8cfb54c20a..00000000000 --- a/include/asm-xtensa/xtensa/coreasm.h +++ /dev/null @@ -1,526 +0,0 @@ -#ifndef XTENSA_COREASM_H -#define XTENSA_COREASM_H - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/coreasm.h -- assembler-specific - * definitions that depend on CORE configuration. - * - * Source for configuration-independent binaries (which link in a - * configuration-specific HAL library) must NEVER include this file. - * It is perfectly normal, however, for the HAL itself to include this - * file. - * - * This file must NOT include xtensa/config/system.h. Any assembler - * header file that depends on system information should likely go in - * a new systemasm.h (or sysasm.h) header file. - * - * NOTE: macro beqi32 is NOT configuration-dependent, and is placed - * here til we will have configuration-independent header file. - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include <xtensa/config/core.h> -#include <xtensa/config/specreg.h> - -/* - * Assembly-language specific definitions (assembly macros, etc.). - */ - -/*---------------------------------------------------------------------- - * find_ms_setbit - * - * This macro finds the most significant bit that is set in <as> - * and return its index + <base> in <ad>, or <base> - 1 if <as> is zero. - * The index counts starting at zero for the lsbit, so the return - * value ranges from <base>-1 (no bit set) to <base>+31 (msbit set). - * - * Parameters: - * <ad> destination address register (any register) - * <as> source address register - * <at> temporary address register (must be different than <as>) - * <base> constant value added to result (usually 0 or 1) - * On entry: - * <ad> = undefined if different than <as> - * <as> = value whose most significant set bit is to be found - * <at> = undefined - * no other registers are used by this macro. - * On exit: - * <ad> = <base> + index of msbit set in original <as>, - * = <base> - 1 if original <as> was zero. - * <as> clobbered (if not <ad>) - * <at> clobbered (if not <ad>) - * Example: - * find_ms_setbit a0, a4, a0, 0 -- return in a0 index of msbit set in a4 - */ - - .macro find_ms_setbit ad, as, at, base -#if XCHAL_HAVE_NSA - movi \at, 31+\base - nsau \as, \as // get index of \as, numbered from msbit (32 if absent) - sub \ad, \at, \as // get numbering from lsbit (0..31, -1 if absent) -#else /* XCHAL_HAVE_NSA */ - movi \at, \base // start with result of 0 (point to lsbit of 32) - - beqz \as, 2f // special case for zero argument: return -1 - bltui \as, 0x10000, 1f // is it one of the 16 lsbits? (if so, check lower 16 bits) - addi \at, \at, 16 // no, increment result to upper 16 bits (of 32) - //srli \as, \as, 16 // check upper half (shift right 16 bits) - extui \as, \as, 16, 16 // check upper half (shift right 16 bits) -1: bltui \as, 0x100, 1f // is it one of the 8 lsbits? (if so, check lower 8 bits) - addi \at, \at, 8 // no, increment result to upper 8 bits (of 16) - srli \as, \as, 8 // shift right to check upper 8 bits -1: bltui \as, 0x10, 1f // is it one of the 4 lsbits? (if so, check lower 4 bits) - addi \at, \at, 4 // no, increment result to upper 4 bits (of 8) - srli \as, \as, 4 // shift right 4 bits to check upper half -1: bltui \as, 0x4, 1f // is it one of the 2 lsbits? (if so, check lower 2 bits) - addi \at, \at, 2 // no, increment result to upper 2 bits (of 4) - srli \as, \as, 2 // shift right 2 bits to check upper half -1: bltui \as, 0x2, 1f // is it the lsbit? - addi \at, \at, 2 // no, increment result to upper bit (of 2) -2: addi \at, \at, -1 // (from just above: add 1; from beqz: return -1) - //srli \as, \as, 1 -1: // done! \at contains index of msbit set (or -1 if none set) - .if 0x\ad - 0x\at // destination different than \at ? (works because regs are a0-a15) - mov \ad, \at // then move result to \ad - .endif -#endif /* XCHAL_HAVE_NSA */ - .endm // find_ms_setbit - -/*---------------------------------------------------------------------- - * find_ls_setbit - * - * This macro finds the least significant bit that is set in <as>, - * and return its index in <ad>. - * Usage is the same as for the find_ms_setbit macro. - * Example: - * find_ls_setbit a0, a4, a0, 0 -- return in a0 index of lsbit set in a4 - */ - - .macro find_ls_setbit ad, as, at, base - neg \at, \as // keep only the least-significant bit that is set... - and \as, \at, \as // ... in \as - find_ms_setbit \ad, \as, \at, \base - .endm // find_ls_setbit - -/*---------------------------------------------------------------------- - * find_ls_one - * - * Same as find_ls_setbit with base zero. - * Source (as) and destination (ad) registers must be different. - * Provided for backward compatibility. - */ - - .macro find_ls_one ad, as - find_ls_setbit \ad, \as, \ad, 0 - .endm // find_ls_one - -/*---------------------------------------------------------------------- - * floop, floopnez, floopgtz, floopend - * - * These macros are used for fast inner loops that - * work whether or not the Loops options is configured. - * If the Loops option is configured, they simply use - * the zero-overhead LOOP instructions; otherwise - * they use explicit decrement and branch instructions. - * - * They are used in pairs, with floop, floopnez or floopgtz - * at the beginning of the loop, and floopend at the end. - * - * Each pair of loop macro calls must be given the loop count - * address register and a unique label for that loop. - * - * Example: - * - * movi a3, 16 // loop 16 times - * floop a3, myloop1 - * : - * bnez a7, end1 // exit loop if a7 != 0 - * : - * floopend a3, myloop1 - * end1: - * - * Like the LOOP instructions, these macros cannot be - * nested, must include at least one instruction, - * cannot call functions inside the loop, etc. - * The loop can be exited by jumping to the instruction - * following floopend (or elsewhere outside the loop), - * or continued by jumping to a NOP instruction placed - * immediately before floopend. - * - * Unlike LOOP instructions, the register passed to floop* - * cannot be used inside the loop, because it is used as - * the loop counter if the Loops option is not configured. - * And its value is undefined after exiting the loop. - * And because the loop counter register is active inside - * the loop, you can't easily use this construct to loop - * across a register file using ROTW as you might with LOOP - * instructions, unless you copy the loop register along. - */ - - /* Named label version of the macros: */ - - .macro floop ar, endlabel - floop_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - .macro floopnez ar, endlabel - floopnez_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - .macro floopgtz ar, endlabel - floopgtz_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - .macro floopend ar, endlabel - floopend_ \ar, .Lfloopstart_\endlabel, .Lfloopend_\endlabel - .endm - - /* Numbered local label version of the macros: */ -#if 0 /*UNTESTED*/ - .macro floop89 ar - floop_ \ar, 8, 9f - .endm - - .macro floopnez89 ar - floopnez_ \ar, 8, 9f - .endm - - .macro floopgtz89 ar - floopgtz_ \ar, 8, 9f - .endm - - .macro floopend89 ar - floopend_ \ar, 8b, 9 - .endm -#endif /*0*/ - - /* Underlying version of the macros: */ - - .macro floop_ ar, startlabel, endlabelref - .ifdef _infloop_ - .if _infloop_ - .err // Error: floop cannot be nested - .endif - .endif - .set _infloop_, 1 -#if XCHAL_HAVE_LOOPS - loop \ar, \endlabelref -#else /* XCHAL_HAVE_LOOPS */ -\startlabel: - addi \ar, \ar, -1 -#endif /* XCHAL_HAVE_LOOPS */ - .endm // floop_ - - .macro floopnez_ ar, startlabel, endlabelref - .ifdef _infloop_ - .if _infloop_ - .err // Error: floopnez cannot be nested - .endif - .endif - .set _infloop_, 1 -#if XCHAL_HAVE_LOOPS - loopnez \ar, \endlabelref -#else /* XCHAL_HAVE_LOOPS */ - beqz \ar, \endlabelref -\startlabel: - addi \ar, \ar, -1 -#endif /* XCHAL_HAVE_LOOPS */ - .endm // floopnez_ - - .macro floopgtz_ ar, startlabel, endlabelref - .ifdef _infloop_ - .if _infloop_ - .err // Error: floopgtz cannot be nested - .endif - .endif - .set _infloop_, 1 -#if XCHAL_HAVE_LOOPS - loopgtz \ar, \endlabelref -#else /* XCHAL_HAVE_LOOPS */ - bltz \ar, \endlabelref - beqz \ar, \endlabelref -\startlabel: - addi \ar, \ar, -1 -#endif /* XCHAL_HAVE_LOOPS */ - .endm // floopgtz_ - - - .macro floopend_ ar, startlabelref, endlabel - .ifndef _infloop_ - .err // Error: floopend without matching floopXXX - .endif - .ifeq _infloop_ - .err // Error: floopend without matching floopXXX - .endif - .set _infloop_, 0 -#if ! XCHAL_HAVE_LOOPS - bnez \ar, \startlabelref -#endif /* XCHAL_HAVE_LOOPS */ -\endlabel: - .endm // floopend_ - -/*---------------------------------------------------------------------- - * crsil -- conditional RSIL (read/set interrupt level) - * - * Executes the RSIL instruction if it exists, else just reads PS. - * The RSIL instruction does not exist in the new exception architecture - * if the interrupt option is not selected. - */ - - .macro crsil ar, newlevel -#if XCHAL_HAVE_OLD_EXC_ARCH || XCHAL_HAVE_INTERRUPTS - rsil \ar, \newlevel -#else - rsr \ar, PS -#endif - .endm // crsil - -/*---------------------------------------------------------------------- - * window_spill{4,8,12} - * - * These macros spill callers' register windows to the stack. - * They work for both privileged and non-privileged tasks. - * Must be called from a windowed ABI context, eg. within - * a windowed ABI function (ie. valid stack frame, window - * exceptions enabled, not in exception mode, etc). - * - * This macro requires a single invocation of the window_spill_common - * macro in the same assembly unit and section. - * - * Note that using window_spill{4,8,12} macros is more efficient - * than calling a function implemented using window_spill_function, - * because the latter needs extra code to figure out the size of - * the call to the spilling function. - * - * Example usage: - * - * .text - * .align 4 - * .global some_function - * .type some_function,@function - * some_function: - * entry a1, 16 - * : - * : - * - * window_spill4 // spill windows of some_function's callers; preserves a0..a3 only; - * // to use window_spill{8,12} in this example function we'd have - * // to increase space allocated by the entry instruction, because - * // 16 bytes only allows call4; 32 or 48 bytes (+locals) are needed - * // for call8/window_spill8 or call12/window_spill12 respectively. - * : - * - * retw - * - * window_spill_common // instantiates code used by window_spill4 - * - * - * On entry: - * none (if window_spill4) - * stack frame has enough space allocated for call8 (if window_spill8) - * stack frame has enough space allocated for call12 (if window_spill12) - * On exit: - * a4..a15 clobbered (if window_spill4) - * a8..a15 clobbered (if window_spill8) - * a12..a15 clobbered (if window_spill12) - * no caller windows are in live registers - */ - - .macro window_spill4 -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 16 - movi a15, 0 // for 16-register files, no need to call to reach the end -# elif XCHAL_NUM_AREGS == 32 - call4 .L__wdwspill_assist28 // call deep enough to clear out any live callers -# elif XCHAL_NUM_AREGS == 64 - call4 .L__wdwspill_assist60 // call deep enough to clear out any live callers -# endif -#endif - .endm // window_spill4 - - .macro window_spill8 -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 16 - movi a15, 0 // for 16-register files, no need to call to reach the end -# elif XCHAL_NUM_AREGS == 32 - call8 .L__wdwspill_assist24 // call deep enough to clear out any live callers -# elif XCHAL_NUM_AREGS == 64 - call8 .L__wdwspill_assist56 // call deep enough to clear out any live callers -# endif -#endif - .endm // window_spill8 - - .macro window_spill12 -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 16 - movi a15, 0 // for 16-register files, no need to call to reach the end -# elif XCHAL_NUM_AREGS == 32 - call12 .L__wdwspill_assist20 // call deep enough to clear out any live callers -# elif XCHAL_NUM_AREGS == 64 - call12 .L__wdwspill_assist52 // call deep enough to clear out any live callers -# endif -#endif - .endm // window_spill12 - -/*---------------------------------------------------------------------- - * window_spill_function - * - * This macro outputs a function that will spill its caller's callers' - * register windows to the stack. Eg. it could be used to implement - * a version of xthal_window_spill() that works in non-privileged tasks. - * This works for both privileged and non-privileged tasks. - * - * Typical usage: - * - * .text - * .align 4 - * .global my_spill_function - * .type my_spill_function,@function - * my_spill_function: - * window_spill_function - * - * On entry to resulting function: - * none - * On exit from resulting function: - * none (no caller windows are in live registers) - */ - - .macro window_spill_function -#if XCHAL_HAVE_WINDOWED -# if XCHAL_NUM_AREGS == 32 - entry sp, 48 - bbci.l a0, 31, 1f // branch if called with call4 - bbsi.l a0, 30, 2f // branch if called with call12 - call8 .L__wdwspill_assist16 // called with call8, only need another 8 - retw -1: call12 .L__wdwspill_assist16 // called with call4, only need another 12 - retw -2: call4 .L__wdwspill_assist16 // called with call12, only need another 4 - retw -# elif XCHAL_NUM_AREGS == 64 - entry sp, 48 - bbci.l a0, 31, 1f // branch if called with call4 - bbsi.l a0, 30, 2f // branch if called with call12 - call4 .L__wdwspill_assist52 // called with call8, only need a call4 - retw -1: call8 .L__wdwspill_assist52 // called with call4, only need a call8 - retw -2: call12 .L__wdwspill_assist40 // called with call12, can skip a call12 - retw -# elif XCHAL_NUM_AREGS == 16 - entry sp, 16 - bbci.l a0, 31, 1f // branch if called with call4 - bbsi.l a0, 30, 2f // branch if called with call12 - movi a7, 0 // called with call8 - retw -1: movi a11, 0 // called with call4 -2: retw // if called with call12, everything already spilled - -// movi a15, 0 // trick to spill all but the direct caller -// j 1f -// // The entry instruction is magical in the assembler (gets auto-aligned) -// // so we have to jump to it to avoid falling through the padding. -// // We need entry/retw to know where to return. -//1: entry sp, 16 -// retw -# else -# error "unrecognized address register file size" -# endif -#endif /* XCHAL_HAVE_WINDOWED */ - window_spill_common - .endm // window_spill_function - -/*---------------------------------------------------------------------- - * window_spill_common - * - * Common code used by any number of invocations of the window_spill## - * and window_spill_function macros. - * - * Must be instantiated exactly once within a given assembly unit, - * within call/j range of and same section as window_spill## - * macro invocations for that assembly unit. - * (Is automatically instantiated by the window_spill_function macro.) - */ - - .macro window_spill_common -#if XCHAL_HAVE_WINDOWED && (XCHAL_NUM_AREGS == 32 || XCHAL_NUM_AREGS == 64) - .ifndef .L__wdwspill_defined -# if XCHAL_NUM_AREGS >= 64 -.L__wdwspill_assist60: - entry sp, 32 - call8 .L__wdwspill_assist52 - retw -.L__wdwspill_assist56: - entry sp, 16 - call4 .L__wdwspill_assist52 - retw -.L__wdwspill_assist52: - entry sp, 48 - call12 .L__wdwspill_assist40 - retw -.L__wdwspill_assist40: - entry sp, 48 - call12 .L__wdwspill_assist28 - retw -# endif -.L__wdwspill_assist28: - entry sp, 48 - call12 .L__wdwspill_assist16 - retw -.L__wdwspill_assist24: - entry sp, 32 - call8 .L__wdwspill_assist16 - retw -.L__wdwspill_assist20: - entry sp, 16 - call4 .L__wdwspill_assist16 - retw -.L__wdwspill_assist16: - entry sp, 16 - movi a15, 0 - retw - .set .L__wdwspill_defined, 1 - .endif -#endif /* XCHAL_HAVE_WINDOWED with 32 or 64 aregs */ - .endm // window_spill_common - -/*---------------------------------------------------------------------- - * beqi32 - * - * macro implements version of beqi for arbitrary 32-bit immidiate value - * - * beqi32 ax, ay, imm32, label - * - * Compares value in register ax with imm32 value and jumps to label if - * equal. Clobberes register ay if needed - * - */ - .macro beqi32 ax, ay, imm, label - .ifeq ((\imm-1) & ~7) // 1..8 ? - beqi \ax, \imm, \label - .else - .ifeq (\imm+1) // -1 ? - beqi \ax, \imm, \label - .else - .ifeq (\imm) // 0 ? - beqz \ax, \label - .else - // We could also handle immediates 10,12,16,32,64,128,256 - // but it would be a long macro... - movi \ay, \imm - beq \ax, \ay, \label - .endif - .endif - .endif - .endm // beqi32 - -#endif /*XTENSA_COREASM_H*/ - diff --git a/include/asm-xtensa/xtensa/corebits.h b/include/asm-xtensa/xtensa/corebits.h deleted file mode 100644 index e578ade4163..00000000000 --- a/include/asm-xtensa/xtensa/corebits.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef XTENSA_COREBITS_H -#define XTENSA_COREBITS_H - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * xtensa/corebits.h - Xtensa Special Register field positions and masks. - * - * (In previous releases, these were defined in specreg.h, a generated file. - * This file is not generated, i.e. it is processor configuration independent.) - */ - - -/* EXCCAUSE register fields: */ -#define EXCCAUSE_EXCCAUSE_SHIFT 0 -#define EXCCAUSE_EXCCAUSE_MASK 0x3F -/* Exception causes (mostly incomplete!): */ -#define EXCCAUSE_ILLEGAL 0 -#define EXCCAUSE_SYSCALL 1 -#define EXCCAUSE_IFETCHERROR 2 -#define EXCCAUSE_LOADSTOREERROR 3 -#define EXCCAUSE_LEVEL1INTERRUPT 4 -#define EXCCAUSE_ALLOCA 5 - -/* PS register fields: */ -#define PS_WOE_SHIFT 18 -#define PS_WOE_MASK 0x00040000 -#define PS_WOE PS_WOE_MASK -#define PS_CALLINC_SHIFT 16 -#define PS_CALLINC_MASK 0x00030000 -#define PS_CALLINC(n) (((n)&3)<<PS_CALLINC_SHIFT) /* n = 0..3 */ -#define PS_OWB_SHIFT 8 -#define PS_OWB_MASK 0x00000F00 -#define PS_OWB(n) (((n)&15)<<PS_OWB_SHIFT) /* n = 0..15 (or 0..7) */ -#define PS_RING_SHIFT 6 -#define PS_RING_MASK 0x000000C0 -#define PS_RING(n) (((n)&3)<<PS_RING_SHIFT) /* n = 0..3 */ -#define PS_UM_SHIFT 5 -#define PS_UM_MASK 0x00000020 -#define PS_UM PS_UM_MASK -#define PS_EXCM_SHIFT 4 -#define PS_EXCM_MASK 0x00000010 -#define PS_EXCM PS_EXCM_MASK -#define PS_INTLEVEL_SHIFT 0 -#define PS_INTLEVEL_MASK 0x0000000F -#define PS_INTLEVEL(n) ((n)&PS_INTLEVEL_MASK) /* n = 0..15 */ -/* Backward compatibility (deprecated): */ -#define PS_PROGSTACK_SHIFT PS_UM_SHIFT -#define PS_PROGSTACK_MASK PS_UM_MASK -#define PS_PROG_SHIFT PS_UM_SHIFT -#define PS_PROG_MASK PS_UM_MASK -#define PS_PROG PS_UM - -/* DBREAKCn register fields: */ -#define DBREAKC_MASK_SHIFT 0 -#define DBREAKC_MASK_MASK 0x0000003F -#define DBREAKC_LOADBREAK_SHIFT 30 -#define DBREAKC_LOADBREAK_MASK 0x40000000 -#define DBREAKC_STOREBREAK_SHIFT 31 -#define DBREAKC_STOREBREAK_MASK 0x80000000 - -/* DEBUGCAUSE register fields: */ -#define DEBUGCAUSE_DEBUGINT_SHIFT 5 -#define DEBUGCAUSE_DEBUGINT_MASK 0x20 /* debug interrupt */ -#define DEBUGCAUSE_BREAKN_SHIFT 4 -#define DEBUGCAUSE_BREAKN_MASK 0x10 /* BREAK.N instruction */ -#define DEBUGCAUSE_BREAK_SHIFT 3 -#define DEBUGCAUSE_BREAK_MASK 0x08 /* BREAK instruction */ -#define DEBUGCAUSE_DBREAK_SHIFT 2 -#define DEBUGCAUSE_DBREAK_MASK 0x04 /* DBREAK match */ -#define DEBUGCAUSE_IBREAK_SHIFT 1 -#define DEBUGCAUSE_IBREAK_MASK 0x02 /* IBREAK match */ -#define DEBUGCAUSE_ICOUNT_SHIFT 0 -#define DEBUGCAUSE_ICOUNT_MASK 0x01 /* ICOUNT would increment to zero */ - -#endif /*XTENSA_COREBITS_H*/ - diff --git a/include/asm-xtensa/xtensa/hal.h b/include/asm-xtensa/xtensa/hal.h deleted file mode 100644 index d1047250545..00000000000 --- a/include/asm-xtensa/xtensa/hal.h +++ /dev/null @@ -1,822 +0,0 @@ -#ifndef XTENSA_HAL_H -#define XTENSA_HAL_H - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/hal.h -- contains a definition of the - * Core HAL interface. - * - * All definitions in this header file are independent of any specific - * Xtensa processor configuration. Thus an OS or other software can - * include this header file and be compiled into configuration- - * independent objects that can be distributed and eventually linked - * to the HAL library (libhal.a) to create a configuration-specific - * final executable. - * - * Certain definitions, however, are release-specific -- such as the - * XTHAL_RELEASE_xxx macros (or additions made in later releases). - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -/*---------------------------------------------------------------------- - Constant Definitions - (shared with assembly) - ----------------------------------------------------------------------*/ - -/* Software release information (not configuration-specific!): */ -#define XTHAL_RELEASE_MAJOR 1050 -#define XTHAL_RELEASE_MINOR 0 -#define XTHAL_RELEASE_NAME "T1050.0-2002-08-06-eng0" -#define XTHAL_RELEASE_INTERNAL "2002-08-06-eng0" -#define XTHAL_REL_T1050 1 -#define XTHAL_REL_T1050_0 1 -#define XTHAL_REL_T1050_0_2002 1 -#define XTHAL_REL_T1050_0_2002_08 1 -#define XTHAL_REL_T1050_0_2002_08_06 1 -#define XTHAL_REL_T1050_0_2002_08_06_ENG0 1 - -/* HAL version numbers (these names are for backward compatibility): */ -#define XTHAL_MAJOR_REV XTHAL_RELEASE_MAJOR -#define XTHAL_MINOR_REV XTHAL_RELEASE_MINOR -/* - * A bit of software release history on values of XTHAL_{MAJOR,MINOR}_REV: - * - * Release MAJOR MINOR Comment - * ======= ===== ===== ======= - * T1015.n n/a n/a (HAL not yet available) - * T1020.{0,1,2} 0 1 (HAL beta) - * T1020.{3,4} 0 2 First release. - * T1020.n (n>4) 0 2 or >3 (TBD) - * T1030.0 0 1 (HAL beta) - * T1030.{1,2} 0 3 Equivalent to first release. - * T1030.n (n>=3) 0 >= 3 (TBD) - * T1040.n 1040 n Full CHAL available from T1040.2 - * T1050.n 1050 n Current release. - * - * - * Note: there is a distinction between the software release with - * which something is compiled (accessible using XTHAL_RELEASE_* macros) - * and the software release with which the HAL library was compiled - * (accessible using Xthal_release_* global variables). This - * distinction is particularly relevant for vendors that distribute - * configuration-independent binaries (eg. an OS), where their customer - * might link it with a HAL of a different Xtensa software release. - * In this case, it may be appropriate for the OS to verify at run-time - * whether XTHAL_RELEASE_* and Xthal_release_* are compatible. - * [Guidelines as to which release is compatible with which are not - * currently provided explicitly, but might be inferred from reading - * OSKit documentation for all releases -- compatibility is also highly - * dependent on which HAL features are used. Each release is usually - * backward compatible, with very few exceptions if any.] - * - * Notes: - * Tornado 2.0 supported in T1020.3+, T1030.1+, and T1040.{0,1} only. - * Tornado 2.0.2 supported in T1040.2+, and T1050. - * Compile-time HAL port of NucleusPlus supported by T1040.2+ and T1050. - */ - - -/* - * Architectural limits, independent of configuration. - * Note that these are ISA-defined limits, not micro-architecture implementation - * limits enforced by the Xtensa Processor Generator (which may be stricter than - * these below). - */ -#define XTHAL_MAX_CPS 8 /* max number of coprocessors (0..7) */ -#define XTHAL_MAX_INTERRUPTS 32 /* max number of interrupts (0..31) */ -#define XTHAL_MAX_INTLEVELS 16 /* max number of interrupt levels (0..15) */ - /* (as of T1040, implementation limit is 7: 0..6) */ -#define XTHAL_MAX_TIMERS 4 /* max number of timers (CCOMPARE0..CCOMPARE3) */ - /* (as of T1040, implementation limit is 3: 0..2) */ - -/* Misc: */ -#define XTHAL_LITTLEENDIAN 0 -#define XTHAL_BIGENDIAN 1 - - -/* Interrupt types: */ -#define XTHAL_INTTYPE_UNCONFIGURED 0 -#define XTHAL_INTTYPE_SOFTWARE 1 -#define XTHAL_INTTYPE_EXTERN_EDGE 2 -#define XTHAL_INTTYPE_EXTERN_LEVEL 3 -#define XTHAL_INTTYPE_TIMER 4 -#define XTHAL_INTTYPE_NMI 5 -#define XTHAL_MAX_INTTYPES 6 /* number of interrupt types */ - -/* Timer related: */ -#define XTHAL_TIMER_UNCONFIGURED -1 /* Xthal_timer_interrupt[] value for non-existent timers */ -#define XTHAL_TIMER_UNASSIGNED XTHAL_TIMER_UNCONFIGURED /* (for backwards compatibility only) */ - - -/* Access Mode bits (tentative): */ /* bit abbr unit short_name PPC equ - Description */ -#define XTHAL_AMB_EXCEPTION 0 /* 001 E EX fls: EXception none - generate exception on any access (aka "illegal") */ -#define XTHAL_AMB_HITCACHE 1 /* 002 C CH fls: use Cache on Hit ~(I CI) - use cache on hit -- way from tag match [or H HC, or U UC] (ISA: same, except for Isolate case) */ -#define XTHAL_AMB_ALLOCATE 2 /* 004 A AL fl?: ALlocate none - refill cache on miss -- way from LRU [or F FI fill] (ISA: Read/Write Miss Refill) */ -#define XTHAL_AMB_WRITETHRU 3 /* 008 W WT --s: WriteThrough W WT - store immediately to memory (ISA: same) */ -#define XTHAL_AMB_ISOLATE 4 /* 010 I IS fls: ISolate none - use cache regardless of hit-vs-miss -- way from vaddr (ISA: use-cache-on-miss+hit) */ -#define XTHAL_AMB_GUARD 5 /* 020 G GU ?l?: GUard G * - non-speculative; spec/replay refs not permitted */ -#if 0 -#define XTHAL_AMB_ORDERED x /* 000 O OR fls: ORdered G * - mem accesses cannot be out of order */ -#define XTHAL_AMB_FUSEWRITES x /* 000 F FW --s: FuseWrites none - allow combining/merging multiple writes (to same datapath data unit) into one (implied by writeback) */ -#define XTHAL_AMB_COHERENT x /* 000 M MC fl?: Mem/MP Coherent M - on reads, other CPUs/bus-masters may need to supply data */ -#define XTHAL_AMB_TRUSTED x /* 000 T TR ?l?: TRusted none - memory will not bus error (if it does, handle as fatal imprecise interrupt) */ -#define XTHAL_AMB_PREFETCH x /* 000 P PR fl?: PRefetch none - on refill, read line+1 into prefetch buffers */ -#define XTHAL_AMB_STREAM x /* 000 S ST ???: STreaming none - access one of N stream buffers */ -#endif /*0*/ - -#define XTHAL_AM_EXCEPTION (1<<XTHAL_AMB_EXCEPTION) -#define XTHAL_AM_HITCACHE (1<<XTHAL_AMB_HITCACHE) -#define XTHAL_AM_ALLOCATE (1<<XTHAL_AMB_ALLOCATE) -#define XTHAL_AM_WRITETHRU (1<<XTHAL_AMB_WRITETHRU) -#define XTHAL_AM_ISOLATE (1<<XTHAL_AMB_ISOLATE) -#define XTHAL_AM_GUARD (1<<XTHAL_AMB_GUARD) -#if 0 -#define XTHAL_AM_ORDERED (1<<XTHAL_AMB_ORDERED) -#define XTHAL_AM_FUSEWRITES (1<<XTHAL_AMB_FUSEWRITES) -#define XTHAL_AM_COHERENT (1<<XTHAL_AMB_COHERENT) -#define XTHAL_AM_TRUSTED (1<<XTHAL_AMB_TRUSTED) -#define XTHAL_AM_PREFETCH (1<<XTHAL_AMB_PREFETCH) -#define XTHAL_AM_STREAM (1<<XTHAL_AMB_STREAM) -#endif /*0*/ - -/* - * Allowed Access Modes (bit combinations). - * - * Columns are: - * "FOGIWACE" - * Access mode bits (see XTHAL_AMB_xxx above). - * <letter> = bit is set - * '-' = bit is clear - * '.' = bit is irrelevant / don't care, as follows: - * E=1 makes all others irrelevant - * W,F relevant only for stores - * "2345" - * Indicates which Xtensa releases support the corresponding - * access mode. Releases for each character column are: - * 2 = prior to T1020.2: T1015 (V1.5), T1020.0, T1020.1 - * 3 = T1020.2 and later: T1020.2+, T1030 - * 4 = T1040 - * 5 = T1050 (maybe) - * And the character column contents are: - * <number> = support by release(s) - * "." = unsupported by release(s) - * "?" = support unknown - */ - /* FOGIWACE 2345 */ -/* For instruction fetch: */ -#define XTHAL_FAM_EXCEPTION 0x001 /* .......E 2345 exception */ -#define XTHAL_FAM_ISOLATE 0x012 /* .--I.-C- .... isolate */ -#define XTHAL_FAM_BYPASS 0x000 /* .---.--- 2345 bypass */ -#define XTHAL_FAM_NACACHED 0x002 /* .---.-C- .... cached no-allocate (frozen) */ -#define XTHAL_FAM_CACHED 0x006 /* .---.AC- 2345 cached */ -/* For data load: */ -#define XTHAL_LAM_EXCEPTION 0x001 /* .......E 2345 exception */ -#define XTHAL_LAM_ISOLATE 0x012 /* .--I.-C- 2345 isolate */ -#define XTHAL_LAM_BYPASS 0x000 /* .O--.--- 2... bypass speculative */ -#define XTHAL_LAM_BYPASSG 0x020 /* .OG-.--- .345 bypass guarded */ -#define XTHAL_LAM_NACACHED 0x002 /* .O--.-C- 2... cached no-allocate speculative */ -#define XTHAL_LAM_NACACHEDG 0x022 /* .OG-.-C- .345 cached no-allocate guarded */ -#define XTHAL_LAM_CACHED 0x006 /* .---.AC- 2345 cached speculative */ -#define XTHAL_LAM_CACHEDG 0x026 /* .?G-.AC- .... cached guarded */ -/* For data store: */ -#define XTHAL_SAM_EXCEPTION 0x001 /* .......E 2345 exception */ -#define XTHAL_SAM_ISOLATE 0x032 /* .-GI--C- 2345 isolate */ -#define XTHAL_SAM_BYPASS 0x028 /* -OG-W--- 2345 bypass */ -/*efine XTHAL_SAM_BYPASSF 0x028*/ /* F-G-W--- ...? bypass write-combined */ -#define XTHAL_SAM_WRITETHRU 0x02A /* -OG-W-C- 234? writethrough */ -/*efine XTHAL_SAM_WRITETHRUF 0x02A*/ /* F-G-W-C- ...5 writethrough write-combined */ -#define XTHAL_SAM_WRITEALLOC 0x02E /* -OG-WAC- ...? writethrough-allocate */ -/*efine XTHAL_SAM_WRITEALLOCF 0x02E*/ /* F-G-WAC- ...? writethrough-allocate write-combined */ -#define XTHAL_SAM_WRITEBACK 0x026 /* F-G--AC- ...5 writeback */ - -#if 0 -/* - Cache attribute encoding for CACHEATTR (per ISA): - (Note: if this differs from ISA Ref Manual, ISA has precedence) - - Inst-fetches Loads Stores - ------------- ------------ ------------- -0x0 FCA_EXCEPTION ?LCA_NACACHED_G* SCA_WRITETHRU "uncached" -0x1 FCA_CACHED LCA_CACHED SCA_WRITETHRU cached -0x2 FCA_BYPASS LCA_BYPASS_G* SCA_BYPASS bypass -0x3 FCA_CACHED LCA_CACHED SCA_WRITEALLOCF write-allocate - or LCA_EXCEPTION SCA_EXCEPTION (if unimplemented) -0x4 FCA_CACHED LCA_CACHED SCA_WRITEBACK write-back - or LCA_EXCEPTION SCA_EXCEPTION (if unimplemented) -0x5..D FCA_EXCEPTION LCA_EXCEPTION SCA_EXCEPTION (reserved) -0xE FCA_EXCEPTION LCA_ISOLATE SCA_ISOLATE isolate -0xF FCA_EXCEPTION LCA_EXCEPTION SCA_EXCEPTION illegal - * Prior to T1020.2?, guard feature not supported, this defaulted to speculative (no _G) -*/ -#endif /*0*/ - - -#if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE) -#ifdef __cplusplus -extern "C" { -#endif - -/*---------------------------------------------------------------------- - HAL - ----------------------------------------------------------------------*/ - -/* Constant to be checked in build = (XTHAL_MAJOR_REV<<16)|XTHAL_MINOR_REV */ -extern const unsigned int Xthal_rev_no; - - -/*---------------------------------------------------------------------- - Processor State - ----------------------------------------------------------------------*/ -/* save & restore the extra processor state */ -extern void xthal_save_extra(void *base); -extern void xthal_restore_extra(void *base); - -extern void xthal_save_cpregs(void *base, int); -extern void xthal_restore_cpregs(void *base, int); - -/*extern void xthal_save_all_extra(void *base);*/ -/*extern void xthal_restore_all_extra(void *base);*/ - -/* space for processor state */ -extern const unsigned int Xthal_extra_size; -extern const unsigned int Xthal_extra_align; -/* space for TIE register files */ -extern const unsigned int Xthal_cpregs_size[XTHAL_MAX_CPS]; -extern const unsigned int Xthal_cpregs_align[XTHAL_MAX_CPS]; - -/* total of space for the processor state (for Tor2) */ -extern const unsigned int Xthal_all_extra_size; -extern const unsigned int Xthal_all_extra_align; - -/* initialize the extra processor */ -/*extern void xthal_init_extra(void);*/ -/* initialize the TIE coprocessor */ -/*extern void xthal_init_cp(int);*/ - -/* initialize the extra processor */ -extern void xthal_init_mem_extra(void *); -/* initialize the TIE coprocessor */ -extern void xthal_init_mem_cp(void *, int); - -/* validate & invalidate the TIE register file */ -extern void xthal_validate_cp(int); -extern void xthal_invalidate_cp(int); - -/* the number of TIE coprocessors contiguous from zero (for Tor2) */ -extern const unsigned int Xthal_num_coprocessors; - -/* actual number of coprocessors */ -extern const unsigned char Xthal_cp_num; -/* index of highest numbered coprocessor, plus one */ -extern const unsigned char Xthal_cp_max; -/* index of highest allowed coprocessor number, per cfg, plus one */ -/*extern const unsigned char Xthal_cp_maxcfg;*/ -/* bitmask of which coprocessors are present */ -extern const unsigned int Xthal_cp_mask; - -/* read and write cpenable register */ -extern void xthal_set_cpenable(unsigned); -extern unsigned xthal_get_cpenable(void); - -/* read & write extra state register */ -/*extern int xthal_read_extra(void *base, unsigned reg, unsigned *value);*/ -/*extern int xthal_write_extra(void *base, unsigned reg, unsigned value);*/ - -/* read & write a TIE coprocessor register */ -/*extern int xthal_read_cpreg(void *base, int cp, unsigned reg, unsigned *value);*/ -/*extern int xthal_write_cpreg(void *base, int cp, unsigned reg, unsigned value);*/ - -/* return coprocessor number based on register */ -/*extern int xthal_which_cp(unsigned reg);*/ - -/*---------------------------------------------------------------------- - Interrupts - ----------------------------------------------------------------------*/ - -/* the number of interrupt levels */ -extern const unsigned char Xthal_num_intlevels; -/* the number of interrupts */ -extern const unsigned char Xthal_num_interrupts; - -/* mask for level of interrupts */ -extern const unsigned int Xthal_intlevel_mask[XTHAL_MAX_INTLEVELS]; -/* mask for level 0 to N interrupts */ -extern const unsigned int Xthal_intlevel_andbelow_mask[XTHAL_MAX_INTLEVELS]; - -/* level of each interrupt */ -extern const unsigned char Xthal_intlevel[XTHAL_MAX_INTERRUPTS]; - -/* type per interrupt */ -extern const unsigned char Xthal_inttype[XTHAL_MAX_INTERRUPTS]; - -/* masks of each type of interrupt */ -extern const unsigned int Xthal_inttype_mask[XTHAL_MAX_INTTYPES]; - -/* interrupt numbers assigned to each timer interrupt */ -extern const int Xthal_timer_interrupt[XTHAL_MAX_TIMERS]; - -/*** Virtual interrupt prioritization: ***/ - -/* Convert between interrupt levels (as per PS.INTLEVEL) and virtual interrupt priorities: */ -extern unsigned xthal_vpri_to_intlevel(unsigned vpri); -extern unsigned xthal_intlevel_to_vpri(unsigned intlevel); - -/* Enables/disables given set (mask) of interrupts; returns previous enabled-mask of all ints: */ -extern unsigned xthal_int_enable(unsigned); -extern unsigned xthal_int_disable(unsigned); - -/* Set/get virtual priority of an interrupt: */ -extern int xthal_set_int_vpri(int intnum, int vpri); -extern int xthal_get_int_vpri(int intnum); - -/* Set/get interrupt lockout level for exclusive access to virtual priority data structures: */ -extern void xthal_set_vpri_locklevel(unsigned intlevel); -extern unsigned xthal_get_vpri_locklevel(void); - -/* Set/get current virtual interrupt priority: */ -extern unsigned xthal_set_vpri(unsigned vpri); -extern unsigned xthal_get_vpri(unsigned vpri); -extern unsigned xthal_set_vpri_intlevel(unsigned intlevel); -extern unsigned xthal_set_vpri_lock(void); - - - -/*---------------------------------------------------------------------- - Generic Interrupt Trampolining Support - ----------------------------------------------------------------------*/ - -typedef void (XtHalVoidFunc)(void); - -/* - * Bitmask of interrupts currently trampolining down: - */ -extern unsigned Xthal_tram_pending; - -/* - * Bitmask of which interrupts currently trampolining down - * synchronously are actually enabled; this bitmask is necessary - * because INTENABLE cannot hold that state (sync-trampolining - * interrupts must be kept disabled while trampolining); - * in the current implementation, any bit set here is not set - * in INTENABLE, and vice-versa; once a sync-trampoline is - * handled (at level one), its enable bit must be moved from - * here to INTENABLE: - */ -extern unsigned Xthal_tram_enabled; - -/* - * Bitmask of interrupts configured for sync trampolining: - */ -extern unsigned Xthal_tram_sync; - - -/* Trampoline support functions: */ -extern unsigned xthal_tram_pending_to_service( void ); -extern void xthal_tram_done( unsigned serviced_mask ); -extern int xthal_tram_set_sync( int intnum, int sync ); -extern XtHalVoidFunc* xthal_set_tram_trigger_func( XtHalVoidFunc *trigger_fn ); - -/* INTENABLE,INTREAD,INTSET,INTCLEAR register access functions: */ -extern unsigned xthal_get_intenable( void ); -extern void xthal_set_intenable( unsigned ); -extern unsigned xthal_get_intread( void ); -extern void xthal_set_intset( unsigned ); -extern void xthal_set_intclear( unsigned ); - - -/*---------------------------------------------------------------------- - Register Windows - ----------------------------------------------------------------------*/ - -/* number of registers in register window */ -extern const unsigned int Xthal_num_aregs; -extern const unsigned char Xthal_num_aregs_log2; - -/* This spill any live register windows (other than the caller's): */ -extern void xthal_window_spill( void ); - - -/*---------------------------------------------------------------------- - Cache - ----------------------------------------------------------------------*/ - -/* size of the cache lines in log2(bytes) */ -extern const unsigned char Xthal_icache_linewidth; -extern const unsigned char Xthal_dcache_linewidth; -/* size of the cache lines in bytes */ -extern const unsigned short Xthal_icache_linesize; -extern const unsigned short Xthal_dcache_linesize; -/* number of cache sets in log2(lines per way) */ -extern const unsigned char Xthal_icache_setwidth; -extern const unsigned char Xthal_dcache_setwidth; -/* cache set associativity (number of ways) */ -extern const unsigned int Xthal_icache_ways; -extern const unsigned int Xthal_dcache_ways; -/* size of the caches in bytes (ways * 2^(linewidth + setwidth)) */ -extern const unsigned int Xthal_icache_size; -extern const unsigned int Xthal_dcache_size; -/* cache features */ -extern const unsigned char Xthal_dcache_is_writeback; -extern const unsigned char Xthal_icache_line_lockable; -extern const unsigned char Xthal_dcache_line_lockable; - -/* cache attribute register control (used by other HAL routines) */ -extern unsigned xthal_get_cacheattr( void ); -extern unsigned xthal_get_icacheattr( void ); -extern unsigned xthal_get_dcacheattr( void ); -extern void xthal_set_cacheattr( unsigned ); -extern void xthal_set_icacheattr( unsigned ); -extern void xthal_set_dcacheattr( unsigned ); - -/* initialize cache support (must be called once at startup, before all other cache calls) */ -/*extern void xthal_cache_startinit( void );*/ -/* reset caches */ -/*extern void xthal_icache_reset( void );*/ -/*extern void xthal_dcache_reset( void );*/ -/* enable caches */ -extern void xthal_icache_enable( void ); /* DEPRECATED */ -extern void xthal_dcache_enable( void ); /* DEPRECATED */ -/* disable caches */ -extern void xthal_icache_disable( void ); /* DEPRECATED */ -extern void xthal_dcache_disable( void ); /* DEPRECATED */ - -/* invalidate the caches */ -extern void xthal_icache_all_invalidate( void ); -extern void xthal_dcache_all_invalidate( void ); -extern void xthal_icache_region_invalidate( void *addr, unsigned size ); -extern void xthal_dcache_region_invalidate( void *addr, unsigned size ); -extern void xthal_icache_line_invalidate(void *addr); -extern void xthal_dcache_line_invalidate(void *addr); -/* write dirty data back */ -extern void xthal_dcache_all_writeback( void ); -extern void xthal_dcache_region_writeback( void *addr, unsigned size ); -extern void xthal_dcache_line_writeback(void *addr); -/* write dirty data back and invalidate */ -extern void xthal_dcache_all_writeback_inv( void ); -extern void xthal_dcache_region_writeback_inv( void *addr, unsigned size ); -extern void xthal_dcache_line_writeback_inv(void *addr); -/* prefetch and lock specified memory range into cache */ -extern void xthal_icache_region_lock( void *addr, unsigned size ); -extern void xthal_dcache_region_lock( void *addr, unsigned size ); -extern void xthal_icache_line_lock(void *addr); -extern void xthal_dcache_line_lock(void *addr); -/* unlock from cache */ -extern void xthal_icache_all_unlock( void ); -extern void xthal_dcache_all_unlock( void ); -extern void xthal_icache_region_unlock( void *addr, unsigned size ); -extern void xthal_dcache_region_unlock( void *addr, unsigned size ); -extern void xthal_icache_line_unlock(void *addr); -extern void xthal_dcache_line_unlock(void *addr); - - -/* sync icache and memory */ -extern void xthal_icache_sync( void ); -/* sync dcache and memory */ -extern void xthal_dcache_sync( void ); - -/*---------------------------------------------------------------------- - Debug - ----------------------------------------------------------------------*/ - -/* 1 if debug option configured, 0 if not: */ -extern const int Xthal_debug_configured; - -/* Number of instruction and data break registers: */ -extern const int Xthal_num_ibreak; -extern const int Xthal_num_dbreak; - -/* Set (plant) and remove software breakpoint, both synchronizing cache: */ -extern unsigned int xthal_set_soft_break(void *addr); -extern void xthal_remove_soft_break(void *addr, unsigned int); - - -/*---------------------------------------------------------------------- - Disassembler - ----------------------------------------------------------------------*/ - -/* Max expected size of the return buffer for a disassembled instruction (hint only): */ -#define XTHAL_DISASM_BUFSIZE 80 - -/* Disassembly option bits for selecting what to return: */ -#define XTHAL_DISASM_OPT_ADDR 0x0001 /* display address */ -#define XTHAL_DISASM_OPT_OPHEX 0x0002 /* display opcode bytes in hex */ -#define XTHAL_DISASM_OPT_OPCODE 0x0004 /* display opcode name (mnemonic) */ -#define XTHAL_DISASM_OPT_PARMS 0x0008 /* display parameters */ -#define XTHAL_DISASM_OPT_ALL 0x0FFF /* display everything */ - -/* routine to get a string for the disassembled instruction */ -extern int xthal_disassemble( unsigned char *instr_buf, void *tgt_addr, - char *buffer, unsigned buflen, unsigned options ); - -/* routine to get the size of the next instruction. Returns 0 for - illegal instruction */ -extern int xthal_disassemble_size( unsigned char *instr_buf ); - - -/*---------------------------------------------------------------------- - Core Counter - ----------------------------------------------------------------------*/ - -/* counter info */ -extern const unsigned char Xthal_have_ccount; /* set if CCOUNT register present */ -extern const unsigned char Xthal_num_ccompare; /* number of CCOMPAREn registers */ - -/* get CCOUNT register (if not present return 0) */ -extern unsigned xthal_get_ccount(void); - -/* set and get CCOMPAREn registers (if not present, get returns 0) */ -extern void xthal_set_ccompare(int, unsigned); -extern unsigned xthal_get_ccompare(int); - - -/*---------------------------------------------------------------------- - Instruction/Data RAM/ROM Access - ----------------------------------------------------------------------*/ - -extern void* xthal_memcpy(void *dst, const void *src, unsigned len); -extern void* xthal_bcopy(const void *src, void *dst, unsigned len); - -/*---------------------------------------------------------------------- - MP Synchronization - ----------------------------------------------------------------------*/ -extern int xthal_compare_and_set( int *addr, int test_val, int compare_val ); -extern unsigned xthal_get_prid( void ); - -/*extern const char Xthal_have_s32c1i;*/ -extern const unsigned char Xthal_have_prid; - - -/*---------------------------------------------------------------------- - Miscellaneous - ----------------------------------------------------------------------*/ - -extern const unsigned int Xthal_release_major; -extern const unsigned int Xthal_release_minor; -extern const char * const Xthal_release_name; -extern const char * const Xthal_release_internal; - -extern const unsigned char Xthal_memory_order; -extern const unsigned char Xthal_have_windowed; -extern const unsigned char Xthal_have_density; -extern const unsigned char Xthal_have_booleans; -extern const unsigned char Xthal_have_loops; -extern const unsigned char Xthal_have_nsa; -extern const unsigned char Xthal_have_minmax; -extern const unsigned char Xthal_have_sext; -extern const unsigned char Xthal_have_clamps; -extern const unsigned char Xthal_have_mac16; -extern const unsigned char Xthal_have_mul16; -extern const unsigned char Xthal_have_fp; -extern const unsigned char Xthal_have_speculation; -extern const unsigned char Xthal_have_exceptions; -extern const unsigned char Xthal_xea_version; -extern const unsigned char Xthal_have_interrupts; -extern const unsigned char Xthal_have_highlevel_interrupts; -extern const unsigned char Xthal_have_nmi; - -extern const unsigned short Xthal_num_writebuffer_entries; - -extern const unsigned int Xthal_build_unique_id; -/* Release info for hardware targeted by software upgrades: */ -extern const unsigned int Xthal_hw_configid0; -extern const unsigned int Xthal_hw_configid1; -extern const unsigned int Xthal_hw_release_major; -extern const unsigned int Xthal_hw_release_minor; -extern const char * const Xthal_hw_release_name; -extern const char * const Xthal_hw_release_internal; - - -/* Internal memories... */ - -extern const unsigned char Xthal_num_instrom; -extern const unsigned char Xthal_num_instram; -extern const unsigned char Xthal_num_datarom; -extern const unsigned char Xthal_num_dataram; -extern const unsigned char Xthal_num_xlmi; -extern const unsigned int Xthal_instrom_vaddr[1]; -extern const unsigned int Xthal_instrom_paddr[1]; -extern const unsigned int Xthal_instrom_size [1]; -extern const unsigned int Xthal_instram_vaddr[1]; -extern const unsigned int Xthal_instram_paddr[1]; -extern const unsigned int Xthal_instram_size [1]; -extern const unsigned int Xthal_datarom_vaddr[1]; -extern const unsigned int Xthal_datarom_paddr[1]; -extern const unsigned int Xthal_datarom_size [1]; -extern const unsigned int Xthal_dataram_vaddr[1]; -extern const unsigned int Xthal_dataram_paddr[1]; -extern const unsigned int Xthal_dataram_size [1]; -extern const unsigned int Xthal_xlmi_vaddr[1]; -extern const unsigned int Xthal_xlmi_paddr[1]; -extern const unsigned int Xthal_xlmi_size [1]; - - - -/*---------------------------------------------------------------------- - Memory Management Unit - ----------------------------------------------------------------------*/ - -extern const unsigned char Xthal_have_spanning_way; -extern const unsigned char Xthal_have_identity_map; -extern const unsigned char Xthal_have_mimic_cacheattr; -extern const unsigned char Xthal_have_xlt_cacheattr; -extern const unsigned char Xthal_have_cacheattr; -extern const unsigned char Xthal_have_tlbs; - -extern const unsigned char Xthal_mmu_asid_bits; /* 0 .. 8 */ -extern const unsigned char Xthal_mmu_asid_kernel; -extern const unsigned char Xthal_mmu_rings; /* 1 .. 4 (perhaps 0 if no MMU and/or no protection?) */ -extern const unsigned char Xthal_mmu_ring_bits; -extern const unsigned char Xthal_mmu_sr_bits; -extern const unsigned char Xthal_mmu_ca_bits; -extern const unsigned int Xthal_mmu_max_pte_page_size; -extern const unsigned int Xthal_mmu_min_pte_page_size; - -extern const unsigned char Xthal_itlb_way_bits; -extern const unsigned char Xthal_itlb_ways; -extern const unsigned char Xthal_itlb_arf_ways; -extern const unsigned char Xthal_dtlb_way_bits; -extern const unsigned char Xthal_dtlb_ways; -extern const unsigned char Xthal_dtlb_arf_ways; - -/* Convert between virtual and physical addresses (through static maps only): */ -/*** WARNING: these two functions may go away in a future release; don't depend on them! ***/ -extern int xthal_static_v2p( unsigned vaddr, unsigned *paddrp ); -extern int xthal_static_p2v( unsigned paddr, unsigned *vaddrp, unsigned cached ); - -#if 0 -/******************* EXPERIMENTAL AND TENTATIVE ONLY ********************/ - -#define XTHAL_MMU_PAGESZ_COUNT_MAX 8 /* maximum number of different page sizes */ -extern const char Xthal_mmu_pagesz_count; /* 0 .. 8 number of different page sizes configured */ - -/* Note: the following table doesn't necessarily have page sizes in increasing order: */ -extern const char Xthal_mmu_pagesz_log2[XTHAL_MMU_PAGESZ_COUNT_MAX]; /* 10 .. 28 (0 past count) */ - -/* Sorted (increasing) table of page sizes, that indexes into the above table: */ -extern const char Xthal_mmu_pagesz_sorted[XTHAL_MMU_PAGESZ_COUNT_MAX]; /* 0 .. 7 (0 past count) */ - -/*u32 Xthal_virtual_exceptions;*/ /* bitmask of which exceptions execute in virtual mode... */ - -extern const char Xthal_mmu_pte_pagesz_log2_min; /* ?? minimum page size in PTEs */ -extern const char Xthal_mmu_pte_pagesz_log2_max; /* ?? maximum page size in PTEs */ - -/* Cache Attribute Bits Implemented by the Cache (part of the cache abstraction) */ -extern const char Xthal_icache_fca_bits_implemented; /* ITLB/UTLB only! */ -extern const char Xthal_dcache_lca_bits_implemented; /* DTLB/UTLB only! */ -extern const char Xthal_dcache_sca_bits_implemented; /* DTLB/UTLB only! */ - -/* Per TLB Parameters (Instruction, Data, Unified) */ -struct XtHalMmuTlb Xthal_itlb; /* description of MMU I-TLB generic features */ -struct XtHalMmuTlb Xthal_dtlb; /* description of MMU D-TLB generic features */ -struct XtHalMmuTlb Xthal_utlb; /* description of MMU U-TLB generic features */ - -#define XTHAL_MMU_WAYS_MAX 8 /* maximum number of ways (associativities) for each TLB */ - -/* Structure for common information described for each possible TLB (instruction, data and unified): */ -typedef struct XtHalMmuTlb { - u8 va_bits; /* 32 (number of virtual address bits) */ - u8 pa_bits; /* 32 (number of physical address bits) */ - bool tlb_va_indexed; /* 1 (set if TLB is indexed by virtual address) */ - bool tlb_va_tagged; /* 0 (set if TLB is tagged by virtual address) */ - bool cache_va_indexed; /* 1 (set if cache is indexed by virtual address) */ - bool cache_va_tagged; /* 0 (set if cache is tagged by virtual address) */ - /*bool (whether page tables are traversed in vaddr sorted order, paddr sorted order, ...) */ - /*u8 (set of available page attribute bits, other than cache attribute bits defined above) */ - /*u32 (various masks for pages, MMU table/TLB entries, etc.) */ - u8 way_count; /* 0 .. 8 (number of ways, a.k.a. associativities, for this TLB) */ - XtHalMmuTlbWay * ways[XTHAL_MMU_WAYS_MAX]; /* pointers to per-way parms for each way */ -} XtHalMmuTlb; - -/* Per TLB Way (Per Associativity) Parameters */ -typedef struct XtHalMmuTlbWay { - u32 index_count_log2; /* 0 .. 4 */ - u32 pagesz_mask; /* 0 .. 2^pagesz_count - 1 (each bit corresponds to a size */ - /* defined in the Xthal_mmu_pagesz_log2[] table) */ - u32 vpn_const_mask; - u32 vpn_const_value; - u64 ppn_const_mask; /* future may support pa_bits > 32 */ - u64 ppn_const_value; - u32 ppn_id_mask; /* paddr bits taken directly from vaddr */ - bool backgnd_match; /* 0 or 1 */ - /* These are defined in terms of the XTHAL_CACHE_xxx bits: */ - u8 fca_const_mask; /* ITLB/UTLB only! */ - u8 fca_const_value; /* ITLB/UTLB only! */ - u8 lca_const_mask; /* DTLB/UTLB only! */ - u8 lca_const_value; /* DTLB/UTLB only! */ - u8 sca_const_mask; /* DTLB/UTLB only! */ - u8 sca_const_value; /* DTLB/UTLB only! */ - /* These define an encoding that map 5 bits in TLB and PTE entries to */ - /* 8 bits (FCA, ITLB), 16 bits (LCA+SCA, DTLB) or 24 bits (FCA+LCA+SCA, UTLB): */ - /* (they may be moved to struct XtHalMmuTlb) */ - u8 ca_bits; /* number of bits in TLB/PTE entries for cache attributes */ - u32 * ca_map; /* pointer to array of 2^ca_bits entries of FCA+LCA+SCA bits */ -} XtHalMmuTlbWay; - -/* - * The way to determine whether protection support is present in core - * is to [look at Xthal_mmu_rings ???]. - * Give info on memory requirements for MMU tables and other in-memory - * data structures (globally, per task, base and per page, etc.) - whatever bounds can be calculated. - */ - - -/* Default vectors: */ -xthal_immu_fetch_miss_vector -xthal_dmmu_load_miss_vector -xthal_dmmu_store_miss_vector - -/* Functions called when a fault is detected: */ -typedef void (XtHalMmuFaultFunc)( unsigned vaddr, ...context... ); -/* Or, */ -/* a? = vaddr */ -/* a? = context... */ -/* PS.xxx = xxx */ -XtHalMMuFaultFunc *Xthal_immu_fetch_fault_func; -XtHalMMuFaultFunc *Xthal_dmmu_load_fault_func; -XtHalMMuFaultFunc *Xthal_dmmu_store_fault_func; - -/* Default Handlers: */ -/* The user and/or kernel exception handlers may jump to these handlers to handle the relevant exceptions, - * according to the value of EXCCAUSE. The exact register state on entry to these handlers is TBD. */ -/* When multiple TLB entries match (hit) on the same access: */ -xthal_immu_fetch_multihit_handler -xthal_dmmu_load_multihit_handler -xthal_dmmu_store_multihit_handler -/* Protection violations according to cache attributes, and other cache attribute mismatches: */ -xthal_immu_fetch_attr_handler -xthal_dmmu_load_attr_handler -xthal_dmmu_store_attr_handler -/* Protection violations due to insufficient ring level: */ -xthal_immu_fetch_priv_handler -xthal_dmmu_load_priv_handler -xthal_dmmu_store_priv_handler -/* Alignment exception handlers (if supported by the particular Xtensa MMU configuration): */ -xthal_dmmu_load_align_handler -xthal_dmmu_store_align_handler - -/* Or, alternatively, the OS user and/or kernel exception handlers may simply jump to the - * following entry points which will handle any values of EXCCAUSE not handled by the OS: */ -xthal_user_exc_default_handler -xthal_kernel_exc_default_handler - -#endif /*0*/ - -#ifdef INCLUDE_DEPRECATED_HAL_CODE -extern const unsigned char Xthal_have_old_exc_arch; -extern const unsigned char Xthal_have_mmu; -extern const unsigned int Xthal_num_regs; -extern const unsigned char Xthal_num_iroms; -extern const unsigned char Xthal_num_irams; -extern const unsigned char Xthal_num_droms; -extern const unsigned char Xthal_num_drams; -extern const unsigned int Xthal_configid0; -extern const unsigned int Xthal_configid1; -#endif - -#ifdef INCLUDE_DEPRECATED_HAL_DEBUG_CODE -#define XTHAL_24_BIT_BREAK 0x80000000 -#define XTHAL_16_BIT_BREAK 0x40000000 -extern const unsigned short Xthal_ill_inst_16[16]; -#define XTHAL_DEST_REG 0xf0000000 /* Mask for destination register */ -#define XTHAL_DEST_REG_INST 0x08000000 /* Branch address is in register */ -#define XTHAL_DEST_REL_INST 0x04000000 /* Branch address is relative */ -#define XTHAL_RFW_INST 0x00000800 -#define XTHAL_RFUE_INST 0x00000400 -#define XTHAL_RFI_INST 0x00000200 -#define XTHAL_RFE_INST 0x00000100 -#define XTHAL_RET_INST 0x00000080 -#define XTHAL_BREAK_INST 0x00000040 -#define XTHAL_SYSCALL_INST 0x00000020 -#define XTHAL_LOOP_END 0x00000010 /* Not set by xthal_inst_type */ -#define XTHAL_JUMP_INST 0x00000008 /* Call or jump instruction */ -#define XTHAL_BRANCH_INST 0x00000004 /* Branch instruction */ -#define XTHAL_24_BIT_INST 0x00000002 -#define XTHAL_16_BIT_INST 0x00000001 -typedef struct xthal_state { - unsigned pc; - unsigned ar[16]; - unsigned lbeg; - unsigned lend; - unsigned lcount; - unsigned extra_ptr; - unsigned cpregs_ptr[XTHAL_MAX_CPS]; -} XTHAL_STATE; -extern unsigned int xthal_inst_type(void *addr); -extern unsigned int xthal_branch_addr(void *addr); -extern unsigned int xthal_get_npc(XTHAL_STATE *user_state); -#endif /* INCLUDE_DEPRECATED_HAL_DEBUG_CODE */ - -#ifdef __cplusplus -} -#endif -#endif /*!__ASSEMBLY__ */ - -#endif /*XTENSA_HAL_H*/ - diff --git a/include/asm-xtensa/xtensa/simcall.h b/include/asm-xtensa/xtensa/simcall.h deleted file mode 100644 index a2b868929a4..00000000000 --- a/include/asm-xtensa/xtensa/simcall.h +++ /dev/null @@ -1,130 +0,0 @@ -#ifndef SIMCALL_INCLUDED -#define SIMCALL_INCLUDED - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/simcall.h - Simulator call numbers - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of - * this archive for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -/* - * System call like services offered by the simulator host. - * These are modeled after the Linux 2.4 kernel system calls - * for Xtensa processors. However not all system calls and - * not all functionality of a given system call are implemented, - * or necessarily have well defined or equivalent semantics in - * the context of a simulation (as opposed to a Unix kernel). - * - * These services behave largely as if they had been invoked - * as a task in the simulator host's operating system - * (eg. files accessed are those of the simulator host). - * However, these SIMCALLs model a virtual operating system - * so that various definitions, bit assignments etc - * (eg. open mode bits, errno values, etc) are independent - * of the host operating system used to run the simulation. - * Rather these definitions are specific to the Xtensa ISS. - * This way Xtensa ISA code written to use these SIMCALLs - * can (in principle) be simulated on any host. - * - * Up to 6 parameters are passed in registers a3 to a8 - * (note the 6th parameter isn't passed on the stack, - * unlike windowed function calling conventions). - * The return value is in a2. A negative value in the - * range -4096 to -1 indicates a negated error code to be - * reported in errno with a return value of -1, otherwise - * the value in a2 is returned as is. - */ - -/* These #defines need to match what's in Xtensa/OS/vxworks/xtiss/simcalls.c */ - -#define SYS_nop 0 /* n/a - setup; used to flush register windows */ -#define SYS_exit 1 /*x*/ -#define SYS_fork 2 -#define SYS_read 3 /*x*/ -#define SYS_write 4 /*x*/ -#define SYS_open 5 /*x*/ -#define SYS_close 6 /*x*/ -#define SYS_rename 7 /*x 38 - waitpid */ -#define SYS_creat 8 /*x*/ -#define SYS_link 9 /*x (not implemented on WIN32) */ -#define SYS_unlink 10 /*x*/ -#define SYS_execv 11 /* n/a - execve */ -#define SYS_execve 12 /* 11 - chdir */ -#define SYS_pipe 13 /* 42 - time */ -#define SYS_stat 14 /* 106 - mknod */ -#define SYS_chmod 15 -#define SYS_chown 16 /* 202 - lchown */ -#define SYS_utime 17 /* 30 - break */ -#define SYS_wait 18 /* n/a - oldstat */ -#define SYS_lseek 19 /*x*/ -#define SYS_getpid 20 -#define SYS_isatty 21 /* n/a - mount */ -#define SYS_fstat 22 /* 108 - oldumount */ -#define SYS_time 23 /* 13 - setuid */ -#define SYS_gettimeofday 24 /*x 78 - getuid (not implemented on WIN32) */ -#define SYS_times 25 /*X 43 - stime (Xtensa-specific implementation) */ -#define SYS_socket 26 -#define SYS_sendto 27 -#define SYS_recvfrom 28 -#define SYS_select_one 29 /* not compitible select, one file descriptor at the time */ -#define SYS_bind 30 -#define SYS_ioctl 31 - -/* - * Other... - */ -#define SYS_iss_argc 1000 /* returns value of argc */ -#define SYS_iss_argv_size 1001 /* bytes needed for argv & arg strings */ -#define SYS_iss_set_argv 1002 /* saves argv & arg strings at given addr */ - -/* - * SIMCALLs for the ferret memory debugger. All are invoked by - * libferret.a ... ( Xtensa/Target-Libs/ferret ) - */ -#define SYS_ferret 1010 -#define SYS_malloc 1011 -#define SYS_free 1012 -#define SYS_more_heap 1013 -#define SYS_no_heap 1014 - - -/* - * Extra SIMCALLs for GDB: - */ -#define SYS_gdb_break -1 /* invoked by XTOS on user exceptions if EPC points - to a break.n/break, regardless of cause! */ -#define SYS_xmon_out -2 /* invoked by XMON: ... */ -#define SYS_xmon_in -3 /* invoked by XMON: ... */ -#define SYS_xmon_flush -4 /* invoked by XMON: ... */ -#define SYS_gdb_abort -5 /* invoked by XTOS in _xtos_panic() */ -#define SYS_gdb_illegal_inst -6 /* invoked by XTOS for illegal instructions (too deeply) */ -#define SYS_xmon_init -7 /* invoked by XMON: ... */ -#define SYS_gdb_enter_sktloop -8 /* invoked by XTOS on debug exceptions */ - -/* - * SIMCALLs for vxWorks xtiss BSP: - */ -#define SYS_setup_ppp_pipes -83 -#define SYS_log_msg -84 - -/* - * Test SIMCALLs: - */ -#define SYS_test_write_state -100 -#define SYS_test_read_state -101 - -/* - * SYS_select_one specifiers - */ -#define XTISS_SELECT_ONE_READ 1 -#define XTISS_SELECT_ONE_WRITE 2 -#define XTISS_SELECT_ONE_EXCEPT 3 - -#endif /* !SIMCALL_INCLUDED */ diff --git a/include/asm-xtensa/xtensa/xt2000-uart.h b/include/asm-xtensa/xtensa/xt2000-uart.h deleted file mode 100644 index 0154460f0ed..00000000000 --- a/include/asm-xtensa/xtensa/xt2000-uart.h +++ /dev/null @@ -1,155 +0,0 @@ -#ifndef _uart_h_included_ -#define _uart_h_included_ - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/xt2000-uart.h -- NatSemi PC16552D DUART - * definitions - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include <xtensa/xt2000.h> - - -/* 16550 UART DEVICE REGISTERS - The XT2000 board aligns each register to a 32-bit word but the UART device only uses - one byte of the word, which is the least-significant byte regardless of the - endianness of the core (ie. byte offset 0 for little-endian and 3 for big-endian). - So if using word accesses then endianness doesn't matter. - The macros provided here do that. -*/ -struct uart_dev_s { - union { - unsigned int rxb; /* DLAB=0: receive buffer, read-only */ - unsigned int txb; /* DLAB=0: transmit buffer, write-only */ - unsigned int dll; /* DLAB=1: divisor, least-significant byte latch (was write-only?) */ - } w0; - union { - unsigned int ier; /* DLAB=0: interrupt-enable register (was write-only?) */ - unsigned int dlm; /* DLAB=1: divisor, most-significant byte latch (was write-only?) */ - } w1; - - union { - unsigned int isr; /* DLAB=0: interrupt status register, read-only */ - unsigned int fcr; /* DLAB=0: FIFO control register, write-only */ - unsigned int afr; /* DLAB=1: alternate function register */ - } w2; - - unsigned int lcr; /* line control-register, write-only */ - unsigned int mcr; /* modem control-regsiter, write-only */ - unsigned int lsr; /* line status register, read-only */ - unsigned int msr; /* modem status register, read-only */ - unsigned int scr; /* scratch regsiter, read/write */ -}; - -#define _RXB(u) ((u)->w0.rxb) -#define _TXB(u) ((u)->w0.txb) -#define _DLL(u) ((u)->w0.dll) -#define _IER(u) ((u)->w1.ier) -#define _DLM(u) ((u)->w1.dlm) -#define _ISR(u) ((u)->w2.isr) -#define _FCR(u) ((u)->w2.fcr) -#define _AFR(u) ((u)->w2.afr) -#define _LCR(u) ((u)->lcr) -#define _MCR(u) ((u)->mcr) -#define _LSR(u) ((u)->lsr) -#define _MSR(u) ((u)->msr) -#define _SCR(u) ((u)->scr) - -typedef volatile struct uart_dev_s uart_dev_t; - -/* IER bits */ -#define RCVR_DATA_REG_INTENABLE 0x01 -#define XMIT_HOLD_REG_INTENABLE 0x02 -#define RCVR_STATUS_INTENABLE 0x04 -#define MODEM_STATUS_INTENABLE 0x08 - -/* FCR bits */ -#define _FIFO_ENABLE 0x01 -#define RCVR_FIFO_RESET 0x02 -#define XMIT_FIFO_RESET 0x04 -#define DMA_MODE_SELECT 0x08 -#define RCVR_TRIGGER_LSB 0x40 -#define RCVR_TRIGGER_MSB 0x80 - -/* AFR bits */ -#define AFR_CONC_WRITE 0x01 -#define AFR_BAUDOUT_SEL 0x02 -#define AFR_RXRDY_SEL 0x04 - -/* ISR bits */ -#define INT_STATUS(r) ((r)&1) -#define INT_PRIORITY(r) (((r)>>1)&0x7) - -/* LCR bits */ -#define WORD_LENGTH(n) (((n)-5)&0x3) -#define STOP_BIT_ENABLE 0x04 -#define PARITY_ENABLE 0x08 -#define EVEN_PARITY 0x10 -#define FORCE_PARITY 0x20 -#define XMIT_BREAK 0x40 -#define DLAB_ENABLE 0x80 - -/* MCR bits */ -#define _DTR 0x01 -#define _RTS 0x02 -#define _OP1 0x04 -#define _OP2 0x08 -#define LOOP_BACK 0x10 - -/* LSR Bits */ -#define RCVR_DATA_READY 0x01 -#define OVERRUN_ERROR 0x02 -#define PARITY_ERROR 0x04 -#define FRAMING_ERROR 0x08 -#define BREAK_INTERRUPT 0x10 -#define XMIT_HOLD_EMPTY 0x20 -#define XMIT_EMPTY 0x40 -#define FIFO_ERROR 0x80 -#define RCVR_READY(u) (_LSR(u)&RCVR_DATA_READY) -#define XMIT_READY(u) (_LSR(u)&XMIT_HOLD_EMPTY) - -/* MSR bits */ -#define _RDR 0x01 -#define DELTA_DSR 0x02 -#define DELTA_RI 0x04 -#define DELTA_CD 0x08 -#define _CTS 0x10 -#define _DSR 0x20 -#define _RI 0x40 -#define _CD 0x80 - -/* prototypes */ -void uart_init( uart_dev_t *u, int bitrate ); -void uart_out( uart_dev_t *u, char c ); -void uart_puts( uart_dev_t *u, char *s ); -char uart_in( uart_dev_t *u ); -void uart_enable_rcvr_int( uart_dev_t *u ); -void uart_disable_rcvr_int( uart_dev_t *u ); - -#ifdef DUART16552_1_VADDR -/* DUART present. */ -#define DUART_1_BASE (*(uart_dev_t*)DUART16552_1_VADDR) -#define DUART_2_BASE (*(uart_dev_t*)DUART16552_2_VADDR) -#define UART1_PUTS(s) uart_puts( &DUART_1_BASE, s ) -#define UART2_PUTS(s) uart_puts( &DUART_2_BASE, s ) -#else -/* DUART not configured, use dummy placeholders to allow compiles to work. */ -#define DUART_1_BASE (*(uart_dev_t*)0) -#define DUART_2_BASE (*(uart_dev_t*)0) -#define UART1_PUTS(s) -#define UART2_PUTS(s) -#endif - -/* Compute 16-bit divisor for baudrate generator, with rounding: */ -#define DUART_DIVISOR(crystal,speed) (((crystal)/16 + (speed)/2)/(speed)) - -#endif /*_uart_h_included_*/ - diff --git a/include/asm-xtensa/xtensa/xt2000.h b/include/asm-xtensa/xtensa/xt2000.h deleted file mode 100644 index 703a45002f8..00000000000 --- a/include/asm-xtensa/xtensa/xt2000.h +++ /dev/null @@ -1,408 +0,0 @@ -#ifndef _INC_XT2000_H_ -#define _INC_XT2000_H_ - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * include/asm-xtensa/xtensa/xt2000.h - Definitions specific to the - * Tensilica XT2000 Emulation Board - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include <xtensa/config/core.h> -#include <xtensa/config/system.h> - - -/* - * Default assignment of XT2000 devices to external interrupts. - */ - -/* Ethernet interrupt: */ -#ifdef XCHAL_EXTINT3_NUM -#define SONIC83934_INTNUM XCHAL_EXTINT3_NUM -#define SONIC83934_INTLEVEL XCHAL_EXTINT3_LEVEL -#define SONIC83934_INTMASK XCHAL_EXTINT3_MASK -#else -#define SONIC83934_INTMASK 0 -#endif - -/* DUART channel 1 interrupt (P1 - console): */ -#ifdef XCHAL_EXTINT4_NUM -#define DUART16552_1_INTNUM XCHAL_EXTINT4_NUM -#define DUART16552_1_INTLEVEL XCHAL_EXTINT4_LEVEL -#define DUART16552_1_INTMASK XCHAL_EXTINT4_MASK -#else -#define DUART16552_1_INTMASK 0 -#endif - -/* DUART channel 2 interrupt (P2 - 2nd serial port): */ -#ifdef XCHAL_EXTINT5_NUM -#define DUART16552_2_INTNUM XCHAL_EXTINT5_NUM -#define DUART16552_2_INTLEVEL XCHAL_EXTINT5_LEVEL -#define DUART16552_2_INTMASK XCHAL_EXTINT5_MASK -#else -#define DUART16552_2_INTMASK 0 -#endif - -/* FPGA-combined PCI/etc interrupts: */ -#ifdef XCHAL_EXTINT6_NUM -#define XT2000_FPGAPCI_INTNUM XCHAL_EXTINT6_NUM -#define XT2000_FPGAPCI_INTLEVEL XCHAL_EXTINT6_LEVEL -#define XT2000_FPGAPCI_INTMASK XCHAL_EXTINT6_MASK -#else -#define XT2000_FPGAPCI_INTMASK 0 -#endif - - - -/* - * Device addresses. - * - * Note: for endianness-independence, use 32-bit loads and stores for all - * register accesses to Ethernet, DUART and LED devices. Undefined bits - * may need to be masked out if needed when reading if the actual register - * size is smaller than 32 bits. - * - * Note: XT2000 bus byte lanes are defined in terms of msbyte and lsbyte - * relative to the processor. So 32-bit registers are accessed consistently - * from both big and little endian processors. However, this means byte - * sequences are not consistent between big and little endian processors. - * This is fine for RAM, and for ROM if ROM is created for a specific - * processor (and thus has correct byte sequences). However this may be - * unexpected for Flash, which might contain a file-system that one wants - * to use for multiple processor configurations (eg. the Flash might contain - * the Ethernet card's address, endianness-independent application data, etc). - * That is, byte sequences written in Flash by a core of a given endianness - * will be byte-swapped when seen by a core of the other endianness. - * Someone implementing an endianness-independent Flash file system will - * likely handle this byte-swapping issue in the Flash driver software. - */ - -#define DUART16552_XTAL_FREQ 18432000 /* crystal frequency in Hz */ -#define XTBOARD_FLASH_MAXSIZE 0x4000000 /* 64 MB (max; depends on what is socketed!) */ -#define XTBOARD_EPROM_MAXSIZE 0x0400000 /* 4 MB (max; depends on what is socketed!) */ -#define XTBOARD_EEPROM_MAXSIZE 0x0080000 /* 512 kB (max; depends on what is socketed!) */ -#define XTBOARD_ASRAM_SIZE 0x0100000 /* 1 MB */ -#define XTBOARD_PCI_MEM_SIZE 0x8000000 /* 128 MB (allocated) */ -#define XTBOARD_PCI_IO_SIZE 0x1000000 /* 16 MB (allocated) */ - -#ifdef XSHAL_IOBLOCK_BYPASS_PADDR -/* PCI memory space: */ -# define XTBOARD_PCI_MEM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x0000000) -/* Socketed Flash (eg. 2 x 16-bit devices): */ -# define XTBOARD_FLASH_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0x8000000) -/* PCI I/O space: */ -# define XTBOARD_PCI_IO_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xC000000) -/* V3 PCI interface chip register/config space: */ -# define XTBOARD_V3PCI_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD000000) -/* Bus Interface registers: */ -# define XTBOARD_BUSINT_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD010000) -/* FPGA registers: */ -# define XT2000_FPGAREGS_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD020000) -/* SONIC SN83934 Ethernet controller/transceiver: */ -# define SONIC83934_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD030000) -/* 8-character bitmapped LED display: */ -# define XTBOARD_LED_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD040000) -/* National-Semi PC16552D DUART: */ -# define DUART16552_1_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050020) /* channel 1 (P1 - console) */ -# define DUART16552_2_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD050000) /* channel 2 (P2) */ -/* Asynchronous Static RAM: */ -# define XTBOARD_ASRAM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD400000) -/* 8-bit EEPROM: */ -# define XTBOARD_EEPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD600000) -/* 2 x 16-bit EPROMs: */ -# define XTBOARD_EPROM_PADDR (XSHAL_IOBLOCK_BYPASS_PADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_BYPASS_PADDR */ - -/* These devices might be accessed cached: */ -#ifdef XSHAL_IOBLOCK_CACHED_PADDR -# define XTBOARD_PCI_MEM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x0000000) -# define XTBOARD_FLASH_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0x8000000) -# define XTBOARD_ASRAM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD400000) -# define XTBOARD_EEPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD600000) -# define XTBOARD_EPROM_CACHED_PADDR (XSHAL_IOBLOCK_CACHED_PADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_CACHED_PADDR */ - - -/*** Same thing over again, this time with virtual addresses: ***/ - -#ifdef XSHAL_IOBLOCK_BYPASS_VADDR -/* PCI memory space: */ -# define XTBOARD_PCI_MEM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x0000000) -/* Socketed Flash (eg. 2 x 16-bit devices): */ -# define XTBOARD_FLASH_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0x8000000) -/* PCI I/O space: */ -# define XTBOARD_PCI_IO_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xC000000) -/* V3 PCI interface chip register/config space: */ -# define XTBOARD_V3PCI_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD000000) -/* Bus Interface registers: */ -# define XTBOARD_BUSINT_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD010000) -/* FPGA registers: */ -# define XT2000_FPGAREGS_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD020000) -/* SONIC SN83934 Ethernet controller/transceiver: */ -# define SONIC83934_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD030000) -/* 8-character bitmapped LED display: */ -# define XTBOARD_LED_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD040000) -/* National-Semi PC16552D DUART: */ -# define DUART16552_1_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050020) /* channel 1 (P1 - console) */ -# define DUART16552_2_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD050000) /* channel 2 (P2) */ -/* Asynchronous Static RAM: */ -# define XTBOARD_ASRAM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD400000) -/* 8-bit EEPROM: */ -# define XTBOARD_EEPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD600000) -/* 2 x 16-bit EPROMs: */ -# define XTBOARD_EPROM_VADDR (XSHAL_IOBLOCK_BYPASS_VADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_BYPASS_VADDR */ - -/* These devices might be accessed cached: */ -#ifdef XSHAL_IOBLOCK_CACHED_VADDR -# define XTBOARD_PCI_MEM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x0000000) -# define XTBOARD_FLASH_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0x8000000) -# define XTBOARD_ASRAM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD400000) -# define XTBOARD_EEPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD600000) -# define XTBOARD_EPROM_CACHED_VADDR (XSHAL_IOBLOCK_CACHED_VADDR+0xD800000) -#endif /* XSHAL_IOBLOCK_CACHED_VADDR */ - - -/* System ROM: */ -#define XTBOARD_ROM_SIZE XSHAL_ROM_SIZE -#ifdef XSHAL_ROM_VADDR -#define XTBOARD_ROM_VADDR XSHAL_ROM_VADDR -#endif -#ifdef XSHAL_ROM_PADDR -#define XTBOARD_ROM_PADDR XSHAL_ROM_PADDR -#endif - -/* System RAM: */ -#define XTBOARD_RAM_SIZE XSHAL_RAM_SIZE -#ifdef XSHAL_RAM_VADDR -#define XTBOARD_RAM_VADDR XSHAL_RAM_VADDR -#endif -#ifdef XSHAL_RAM_PADDR -#define XTBOARD_RAM_PADDR XSHAL_RAM_PADDR -#endif -#define XTBOARD_RAM_BYPASS_VADDR XSHAL_RAM_BYPASS_VADDR -#define XTBOARD_RAM_BYPASS_PADDR XSHAL_RAM_BYPASS_PADDR - - - -/* - * Things that depend on device addresses. - */ - - -#define XTBOARD_CACHEATTR_WRITEBACK XSHAL_XT2000_CACHEATTR_WRITEBACK -#define XTBOARD_CACHEATTR_WRITEALLOC XSHAL_XT2000_CACHEATTR_WRITEALLOC -#define XTBOARD_CACHEATTR_WRITETHRU XSHAL_XT2000_CACHEATTR_WRITETHRU -#define XTBOARD_CACHEATTR_BYPASS XSHAL_XT2000_CACHEATTR_BYPASS -#define XTBOARD_CACHEATTR_DEFAULT XSHAL_XT2000_CACHEATTR_DEFAULT - -#define XTBOARD_BUSINT_PIPE_REGIONS XSHAL_XT2000_PIPE_REGIONS -#define XTBOARD_BUSINT_SDRAM_REGIONS XSHAL_XT2000_SDRAM_REGIONS - - - -/* - * BusLogic (FPGA) registers. - * All these registers are normally accessed using 32-bit loads/stores. - */ - -/* Register offsets: */ -#define XT2000_DATECD_OFS 0x00 /* date code (read-only) */ -#define XT2000_STSREG_OFS 0x04 /* status (read-only) */ -#define XT2000_SYSLED_OFS 0x08 /* system LED */ -#define XT2000_WRPROT_OFS 0x0C /* write protect */ -#define XT2000_SWRST_OFS 0x10 /* software reset */ -#define XT2000_SYSRST_OFS 0x14 /* system (peripherals) reset */ -#define XT2000_IMASK_OFS 0x18 /* interrupt mask */ -#define XT2000_ISTAT_OFS 0x1C /* interrupt status */ -#define XT2000_V3CFG_OFS 0x20 /* V3 config (V320 PCI) */ - -/* Physical register addresses: */ -#ifdef XT2000_FPGAREGS_PADDR -#define XT2000_DATECD_PADDR (XT2000_FPGAREGS_PADDR+XT2000_DATECD_OFS) -#define XT2000_STSREG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_STSREG_OFS) -#define XT2000_SYSLED_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSLED_OFS) -#define XT2000_WRPROT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_WRPROT_OFS) -#define XT2000_SWRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SWRST_OFS) -#define XT2000_SYSRST_PADDR (XT2000_FPGAREGS_PADDR+XT2000_SYSRST_OFS) -#define XT2000_IMASK_PADDR (XT2000_FPGAREGS_PADDR+XT2000_IMASK_OFS) -#define XT2000_ISTAT_PADDR (XT2000_FPGAREGS_PADDR+XT2000_ISTAT_OFS) -#define XT2000_V3CFG_PADDR (XT2000_FPGAREGS_PADDR+XT2000_V3CFG_OFS) -#endif - -/* Virtual register addresses: */ -#ifdef XT2000_FPGAREGS_VADDR -#define XT2000_DATECD_VADDR (XT2000_FPGAREGS_VADDR+XT2000_DATECD_OFS) -#define XT2000_STSREG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_STSREG_OFS) -#define XT2000_SYSLED_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSLED_OFS) -#define XT2000_WRPROT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_WRPROT_OFS) -#define XT2000_SWRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SWRST_OFS) -#define XT2000_SYSRST_VADDR (XT2000_FPGAREGS_VADDR+XT2000_SYSRST_OFS) -#define XT2000_IMASK_VADDR (XT2000_FPGAREGS_VADDR+XT2000_IMASK_OFS) -#define XT2000_ISTAT_VADDR (XT2000_FPGAREGS_VADDR+XT2000_ISTAT_OFS) -#define XT2000_V3CFG_VADDR (XT2000_FPGAREGS_VADDR+XT2000_V3CFG_OFS) -/* Register access (for C code): */ -#define XT2000_DATECD_REG (*(volatile unsigned*) XT2000_DATECD_VADDR) -#define XT2000_STSREG_REG (*(volatile unsigned*) XT2000_STSREG_VADDR) -#define XT2000_SYSLED_REG (*(volatile unsigned*) XT2000_SYSLED_VADDR) -#define XT2000_WRPROT_REG (*(volatile unsigned*) XT2000_WRPROT_VADDR) -#define XT2000_SWRST_REG (*(volatile unsigned*) XT2000_SWRST_VADDR) -#define XT2000_SYSRST_REG (*(volatile unsigned*) XT2000_SYSRST_VADDR) -#define XT2000_IMASK_REG (*(volatile unsigned*) XT2000_IMASK_VADDR) -#define XT2000_ISTAT_REG (*(volatile unsigned*) XT2000_ISTAT_VADDR) -#define XT2000_V3CFG_REG (*(volatile unsigned*) XT2000_V3CFG_VADDR) -#endif - -/* DATECD (date code) bit fields: */ - -/* BCD-coded month (01..12): */ -#define XT2000_DATECD_MONTH_SHIFT 24 -#define XT2000_DATECD_MONTH_BITS 8 -#define XT2000_DATECD_MONTH_MASK 0xFF000000 -/* BCD-coded day (01..31): */ -#define XT2000_DATECD_DAY_SHIFT 16 -#define XT2000_DATECD_DAY_BITS 8 -#define XT2000_DATECD_DAY_MASK 0x00FF0000 -/* BCD-coded year (2001..9999): */ -#define XT2000_DATECD_YEAR_SHIFT 0 -#define XT2000_DATECD_YEAR_BITS 16 -#define XT2000_DATECD_YEAR_MASK 0x0000FFFF - -/* STSREG (status) bit fields: */ - -/* Switch SW3 setting bit fields (0=off/up, 1=on/down): */ -#define XT2000_STSREG_SW3_SHIFT 0 -#define XT2000_STSREG_SW3_BITS 4 -#define XT2000_STSREG_SW3_MASK 0x0000000F -/* Boot-select bits of switch SW3: */ -#define XT2000_STSREG_BOOTSEL_SHIFT 0 -#define XT2000_STSREG_BOOTSEL_BITS 2 -#define XT2000_STSREG_BOOTSEL_MASK 0x00000003 -/* Boot-select values: */ -#define XT2000_STSREG_BOOTSEL_FLASH 0 -#define XT2000_STSREG_BOOTSEL_EPROM16 1 -#define XT2000_STSREG_BOOTSEL_PROM8 2 -#define XT2000_STSREG_BOOTSEL_ASRAM 3 -/* User-defined bits of switch SW3: */ -#define XT2000_STSREG_SW3_2_SHIFT 2 -#define XT2000_STSREG_SW3_2_MASK 0x00000004 -#define XT2000_STSREG_SW3_3_SHIFT 3 -#define XT2000_STSREG_SW3_3_MASK 0x00000008 - -/* SYSLED (system LED) bit fields: */ - -/* LED control bit (0=off, 1=on): */ -#define XT2000_SYSLED_LEDON_SHIFT 0 -#define XT2000_SYSLED_LEDON_MASK 0x00000001 - -/* WRPROT (write protect) bit fields (0=writable, 1=write-protected [default]): */ - -/* Flash write protect: */ -#define XT2000_WRPROT_FLWP_SHIFT 0 -#define XT2000_WRPROT_FLWP_MASK 0x00000001 -/* Reserved but present write protect bits: */ -#define XT2000_WRPROT_WRP_SHIFT 1 -#define XT2000_WRPROT_WRP_BITS 7 -#define XT2000_WRPROT_WRP_MASK 0x000000FE - -/* SWRST (software reset; allows s/w to generate power-on equivalent reset): */ - -/* Software reset bits: */ -#define XT2000_SWRST_SWR_SHIFT 0 -#define XT2000_SWRST_SWR_BITS 16 -#define XT2000_SWRST_SWR_MASK 0x0000FFFF -/* Software reset value -- writing this value resets the board: */ -#define XT2000_SWRST_RESETVALUE 0x0000DEAD - -/* SYSRST (system reset; controls reset of individual peripherals): */ - -/* All-device reset: */ -#define XT2000_SYSRST_ALL_SHIFT 0 -#define XT2000_SYSRST_ALL_BITS 4 -#define XT2000_SYSRST_ALL_MASK 0x0000000F -/* HDSP-2534 LED display reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_LED_SHIFT 0 -#define XT2000_SYSRST_LED_MASK 0x00000001 -/* Sonic DP83934 Ethernet controller reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_SONIC_SHIFT 1 -#define XT2000_SYSRST_SONIC_MASK 0x00000002 -/* DP16552 DUART reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_DUART_SHIFT 2 -#define XT2000_SYSRST_DUART_MASK 0x00000004 -/* V3 V320 PCI bridge controller reset (1=reset, 0=nothing): */ -#define XT2000_SYSRST_V3_SHIFT 3 -#define XT2000_SYSRST_V3_MASK 0x00000008 - -/* IMASK (interrupt mask; 0=disable, 1=enable): */ -/* ISTAT (interrupt status; 0=inactive, 1=pending): */ - -/* PCI INTP interrupt: */ -#define XT2000_INTMUX_PCI_INTP_SHIFT 2 -#define XT2000_INTMUX_PCI_INTP_MASK 0x00000004 -/* PCI INTS interrupt: */ -#define XT2000_INTMUX_PCI_INTS_SHIFT 3 -#define XT2000_INTMUX_PCI_INTS_MASK 0x00000008 -/* PCI INTD interrupt: */ -#define XT2000_INTMUX_PCI_INTD_SHIFT 4 -#define XT2000_INTMUX_PCI_INTD_MASK 0x00000010 -/* V320 PCI controller interrupt: */ -#define XT2000_INTMUX_V3_SHIFT 5 -#define XT2000_INTMUX_V3_MASK 0x00000020 -/* PCI ENUM interrupt: */ -#define XT2000_INTMUX_PCI_ENUM_SHIFT 6 -#define XT2000_INTMUX_PCI_ENUM_MASK 0x00000040 -/* PCI DEG interrupt: */ -#define XT2000_INTMUX_PCI_DEG_SHIFT 7 -#define XT2000_INTMUX_PCI_DEG_MASK 0x00000080 - -/* V3CFG (V3 config, V320 PCI controller): */ - -/* V3 address control (0=pass-thru, 1=V3 address bits 31:28 set to 4'b0001 [default]): */ -#define XT2000_V3CFG_V3ADC_SHIFT 0 -#define XT2000_V3CFG_V3ADC_MASK 0x00000001 - -/* I2C Devices */ - -#define XT2000_I2C_RTC_ID 0x68 -#define XT2000_I2C_NVRAM0_ID 0x56 /* 1st 256 byte block */ -#define XT2000_I2C_NVRAM1_ID 0x57 /* 2nd 256 byte block */ - -/* NVRAM Board Info structure: */ - -#define XT2000_NVRAM_SIZE 512 - -#define XT2000_NVRAM_BINFO_START 0x100 -#define XT2000_NVRAM_BINFO_SIZE 0x20 -#define XT2000_NVRAM_BINFO_VERSION 0x10 /* version 1.0 */ -#if 0 -#define XT2000_NVRAM_BINFO_VERSION_OFFSET 0x00 -#define XT2000_NVRAM_BINFO_VERSION_SIZE 0x1 -#define XT2000_NVRAM_BINFO_ETH_ADDR_OFFSET 0x02 -#define XT2000_NVRAM_BINFO_ETH_ADDR_SIZE 0x6 -#define XT2000_NVRAM_BINFO_SN_OFFSET 0x10 -#define XT2000_NVRAM_BINFO_SN_SIZE 0xE -#define XT2000_NVRAM_BINFO_CRC_OFFSET 0x1E -#define XT2000_NVRAM_BINFO_CRC_SIZE 0x2 -#endif /*0*/ - -#if !defined(__ASSEMBLY__) && !defined(_NOCLANGUAGE) -typedef struct xt2000_nvram_binfo { - unsigned char version; - unsigned char reserved1; - unsigned char eth_addr[6]; - unsigned char reserved8[8]; - unsigned char serialno[14]; - unsigned char crc[2]; /* 16-bit CRC */ -} xt2000_nvram_binfo; -#endif /*!__ASSEMBLY__ && !_NOCLANGUAGE*/ - - -#endif /*_INC_XT2000_H_*/ - diff --git a/include/asm-xtensa/xtensa/xtboard.h b/include/asm-xtensa/xtensa/xtboard.h deleted file mode 100644 index 22469c17530..00000000000 --- a/include/asm-xtensa/xtensa/xtboard.h +++ /dev/null @@ -1,120 +0,0 @@ -#ifndef _xtboard_h_included_ -#define _xtboard_h_included_ - -/* - * THIS FILE IS GENERATED -- DO NOT MODIFY BY HAND - * - * xtboard.h -- Routines for getting useful information from the board. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002 Tensilica Inc. - */ - - -#include <xtensa/xt2000.h> - -#define XTBOARD_RTC_ERROR -1 -#define XTBOARD_RTC_STOPPED -2 - - -/* xt2000-i2cdev.c: */ -typedef void XtboardDelayFunc( unsigned ); -extern XtboardDelayFunc* xtboard_set_nsdelay_func( XtboardDelayFunc *delay_fn ); -extern int xtboard_i2c_read (unsigned id, unsigned char *buf, unsigned addr, unsigned size); -extern int xtboard_i2c_write(unsigned id, unsigned char *buf, unsigned addr, unsigned size); -extern int xtboard_i2c_wait_nvram_ack(unsigned id, unsigned swtimer); - -/* xtboard.c: */ -extern int xtboard_nvram_read (unsigned addr, unsigned len, unsigned char *buf); -extern int xtboard_nvram_write(unsigned addr, unsigned len, unsigned char *buf); -extern int xtboard_nvram_binfo_read (xt2000_nvram_binfo *buf); -extern int xtboard_nvram_binfo_write(xt2000_nvram_binfo *buf); -extern int xtboard_nvram_binfo_valid(xt2000_nvram_binfo *buf); -extern int xtboard_ethermac_get(unsigned char *buf); -extern int xtboard_ethermac_set(unsigned char *buf); - -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_get_rtc_time -/ -/ Description: Get time stored in real-time clock. -/ -/ Returns: time in seconds stored in real-time clock. -/-**----------------------------------------------------------------------------*/ - -extern unsigned xtboard_get_rtc_time(void); - -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_set_rtc_time -/ -/ Description: Set time stored in real-time clock. -/ -/ Parameters: time -- time in seconds to store to real-time clock -/ -/ Returns: 0 on success, xtboard_i2c_write() error code otherwise. -/-**----------------------------------------------------------------------------*/ - -extern int xtboard_set_rtc_time(unsigned time); - - -/* xtfreq.c: */ -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_measure_sys_clk -/ -/ Description: Get frequency of system clock. -/ -/ Parameters: none -/ -/ Returns: frequency of system clock. -/-**----------------------------------------------------------------------------*/ - -extern unsigned xtboard_measure_sys_clk(void); - - -#if 0 /* old stuff from xtboard.c: */ - -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_nvram valid -/ -/ Description: Determines if data in NVRAM is valid. -/ -/ Parameters: delay -- 10us delay function -/ -/ Returns: 1 if NVRAM is valid, 0 otherwise -/-**----------------------------------------------------------------------------*/ - -extern unsigned xtboard_nvram_valid(void (*delay)( void )); - -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_get_nvram_contents -/ -/ Description: Returns contents of NVRAM. -/ -/ Parameters: buf -- buffer to NVRAM contents. -/ delay -- 10us delay function -/ -/ Returns: 1 if NVRAM is valid, 0 otherwise -/-**----------------------------------------------------------------------------*/ - -extern unsigned xtboard_get_nvram_contents(unsigned char *buf, void (*delay)( void )); - -/*+*---------------------------------------------------------------------------- -/ Function: xtboard_get_ether_addr -/ -/ Description: Returns ethernet address of board. -/ -/ Parameters: buf -- buffer to store ethernet address -/ delay -- 10us delay function -/ -/ Returns: nothing. -/-**----------------------------------------------------------------------------*/ - -extern void xtboard_get_ether_addr(unsigned char *buf, void (*delay)( void )); - -#endif /*0*/ - - -#endif /*_xtboard_h_included_*/ - diff --git a/include/linux/Kbuild b/include/linux/Kbuild index e618b25b5ad..a1b04d8a1d0 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -61,7 +61,6 @@ header-y += fd.h header-y += fdreg.h header-y += fib_rules.h header-y += fuse.h -header-y += futex.h header-y += genetlink.h header-y += gen_stats.h header-y += gigaset_dev.h @@ -203,6 +202,7 @@ unifdef-y += fb.h unifdef-y += fcntl.h unifdef-y += filter.h unifdef-y += flat.h +unifdef-y += futex.h unifdef-y += fs.h unifdef-y += gameport.h unifdef-y += generic_serial.h diff --git a/include/linux/aio.h b/include/linux/aio.h index 3372ec6bf53..a30ef13c9e6 100644 --- a/include/linux/aio.h +++ b/include/linux/aio.h @@ -105,6 +105,7 @@ struct kiocb { wait_queue_t ki_wait; loff_t ki_pos; + atomic_t ki_bio_count; /* num bio used for this iocb */ void *private; /* State that we remember to be able to restart/retry */ unsigned short ki_opcode; diff --git a/include/linux/bio.h b/include/linux/bio.h index 092dbd0e765..08daf3272c0 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -309,6 +309,7 @@ extern struct bio *bio_map_kern(struct request_queue *, void *, unsigned int, gfp_t); extern void bio_set_pages_dirty(struct bio *bio); extern void bio_check_pages_dirty(struct bio *bio); +extern void bio_release_pages(struct bio *bio); extern struct bio *bio_copy_user(struct request_queue *, unsigned long, unsigned int, int); extern int bio_uncopy_user(struct bio *); void zero_fill_bio(struct bio *bio); diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index e1c7286165f..ea330d7b46c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -342,7 +342,6 @@ typedef void (unplug_fn) (request_queue_t *); struct bio_vec; typedef int (merge_bvec_fn) (request_queue_t *, struct bio *, struct bio_vec *); -typedef void (activity_fn) (void *data, int rw); typedef int (issue_flush_fn) (request_queue_t *, struct gendisk *, sector_t *); typedef void (prepare_flush_fn) (request_queue_t *, struct request *); typedef void (softirq_done_fn)(struct request *); @@ -384,7 +383,6 @@ struct request_queue prep_rq_fn *prep_rq_fn; unplug_fn *unplug_fn; merge_bvec_fn *merge_bvec_fn; - activity_fn *activity_fn; issue_flush_fn *issue_flush_fn; prepare_flush_fn *prepare_flush_fn; softirq_done_fn *softirq_done_fn; @@ -411,8 +409,6 @@ struct request_queue */ void *queuedata; - void *activity_data; - /* * queue needs bounce pages for pages above this limit */ @@ -677,7 +673,6 @@ extern void blk_sync_queue(struct request_queue *q); extern void __blk_stop_queue(request_queue_t *q); extern void blk_run_queue(request_queue_t *); extern void blk_start_queueing(request_queue_t *); -extern void blk_queue_activity_fn(request_queue_t *, activity_fn *, void *); extern int blk_rq_map_user(request_queue_t *, struct request *, void __user *, unsigned long); extern int blk_rq_unmap_user(struct request *); extern int blk_rq_map_kern(request_queue_t *, struct request *, void *, unsigned int, gfp_t); diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index d852024ed09..1622d23a8dc 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -159,7 +159,7 @@ static inline s64 cyc2ns(struct clocksource *cs, cycle_t cycles) * Unless you're the timekeeping code, you should not be using this! */ static inline void clocksource_calculate_interval(struct clocksource *c, - unsigned long length_nsec) + unsigned long length_nsec) { u64 tmp; diff --git a/include/linux/coda_linux.h b/include/linux/coda_linux.h index be512cc9879..4c2632a8d31 100644 --- a/include/linux/coda_linux.h +++ b/include/linux/coda_linux.h @@ -64,7 +64,7 @@ void coda_sysctl_clean(void); #define CODA_ALLOC(ptr, cast, size) do { \ if (size < PAGE_SIZE) \ - ptr = (cast)kmalloc((unsigned long) size, GFP_KERNEL); \ + ptr = kmalloc((unsigned long) size, GFP_KERNEL); \ else \ ptr = (cast)vmalloc((unsigned long) size); \ if (!ptr) \ diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 538423d4a86..aca66984aaf 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -40,7 +40,7 @@ extern void __chk_io_ptr(void __iomem *); #error no compiler-gcc.h file for this gcc version #elif __GNUC__ == 4 # include <linux/compiler-gcc4.h> -#elif __GNUC__ == 3 +#elif __GNUC__ == 3 && __GNUC_MINOR__ >= 2 # include <linux/compiler-gcc3.h> #else # error Sorry, your compiler is too old/not recognized. diff --git a/include/linux/configfs.h b/include/linux/configfs.h index a7f01502753..fef6f3d0a4a 100644 --- a/include/linux/configfs.h +++ b/include/linux/configfs.h @@ -160,31 +160,6 @@ struct configfs_group_operations { void (*drop_item)(struct config_group *group, struct config_item *item); }; - - -/** - * Use these macros to make defining attributes easier. See include/linux/device.h - * for examples.. - */ - -#if 0 -#define __ATTR(_name,_mode,_show,_store) { \ - .attr = {.ca_name = __stringify(_name), .ca_mode = _mode, .ca_owner = THIS_MODULE }, \ - .show = _show, \ - .store = _store, \ -} - -#define __ATTR_RO(_name) { \ - .attr = { .ca_name = __stringify(_name), .ca_mode = 0444, .ca_owner = THIS_MODULE }, \ - .show = _name##_show, \ -} - -#define __ATTR_NULL { .attr = { .name = NULL } } - -#define attr_name(_attr) (_attr).attr.name -#endif - - struct configfs_subsystem { struct config_group su_group; struct semaphore su_sem; diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 4ea39fee99c..7f008f6bfdc 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -172,6 +172,8 @@ extern int __cpufreq_driver_target(struct cpufreq_policy *policy, unsigned int relation); +extern int cpufreq_driver_getavg(struct cpufreq_policy *policy); + int cpufreq_register_governor(struct cpufreq_governor *governor); void cpufreq_unregister_governor(struct cpufreq_governor *governor); @@ -204,6 +206,7 @@ struct cpufreq_driver { unsigned int (*get) (unsigned int cpu); /* optional */ + unsigned int (*getavg) (unsigned int cpu); int (*exit) (struct cpufreq_policy *policy); int (*suspend) (struct cpufreq_policy *policy, pm_message_t pmsg); int (*resume) (struct cpufreq_policy *policy); diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h index 8821e1f75b4..826b15e914e 100644 --- a/include/linux/cpuset.h +++ b/include/linux/cpuset.h @@ -30,10 +30,19 @@ void cpuset_update_task_memory_state(void); nodes_subset((nodes), current->mems_allowed) int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl); -extern int __cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask); -static int inline cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask) +extern int __cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask); +extern int __cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask); + +static int inline cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask) +{ + return number_of_cpusets <= 1 || + __cpuset_zone_allowed_softwall(z, gfp_mask); +} + +static int inline cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask) { - return number_of_cpusets <= 1 || __cpuset_zone_allowed(z, gfp_mask); + return number_of_cpusets <= 1 || + __cpuset_zone_allowed_hardwall(z, gfp_mask); } extern int cpuset_excl_nodes_overlap(const struct task_struct *p); @@ -94,7 +103,12 @@ static inline int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl) return 1; } -static inline int cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask) +static inline int cpuset_zone_allowed_softwall(struct zone *z, gfp_t gfp_mask) +{ + return 1; +} + +static inline int cpuset_zone_allowed_hardwall(struct zone *z, gfp_t gfp_mask) { return 1; } diff --git a/include/linux/dccp.h b/include/linux/dccp.h index ed6cc8962d8..1cb054bd93f 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -176,20 +176,20 @@ enum { }; /* DCCP features (RFC 4340 section 6.4) */ - enum { - DCCPF_RESERVED = 0, - DCCPF_CCID = 1, +enum { + DCCPF_RESERVED = 0, + DCCPF_CCID = 1, DCCPF_SHORT_SEQNOS = 2, /* XXX: not yet implemented */ - DCCPF_SEQUENCE_WINDOW = 3, + DCCPF_SEQUENCE_WINDOW = 3, DCCPF_ECN_INCAPABLE = 4, /* XXX: not yet implemented */ - DCCPF_ACK_RATIO = 5, - DCCPF_SEND_ACK_VECTOR = 6, - DCCPF_SEND_NDP_COUNT = 7, + DCCPF_ACK_RATIO = 5, + DCCPF_SEND_ACK_VECTOR = 6, + DCCPF_SEND_NDP_COUNT = 7, DCCPF_MIN_CSUM_COVER = 8, DCCPF_DATA_CHECKSUM = 9, /* XXX: not yet implemented */ - /* 10-127 reserved */ - DCCPF_MIN_CCID_SPECIFIC = 128, - DCCPF_MAX_CCID_SPECIFIC = 255, + /* 10-127 reserved */ + DCCPF_MIN_CCID_SPECIFIC = 128, + DCCPF_MAX_CCID_SPECIFIC = 255, }; /* this structure is argument to DCCP_SOCKOPT_CHANGE_X */ @@ -427,7 +427,7 @@ struct dccp_service_list { }; #define DCCP_SERVICE_INVALID_VALUE htonl((__u32)-1) -#define DCCP_SERVICE_CODE_IS_ABSENT 0 +#define DCCP_SERVICE_CODE_IS_ABSENT 0 static inline int dccp_list_has_service(const struct dccp_service_list *sl, const __be32 service) @@ -436,7 +436,7 @@ static inline int dccp_list_has_service(const struct dccp_service_list *sl, u32 i = sl->dccpsl_nr; while (i--) if (sl->dccpsl_list[i] == service) - return 1; + return 1; } return 0; } @@ -511,7 +511,7 @@ struct dccp_sock { __u8 dccps_hc_tx_insert_options:1; struct timer_list dccps_xmit_timer; }; - + static inline struct dccp_sock *dccp_sk(const struct sock *sk) { return (struct dccp_sock *)sk; diff --git a/include/linux/fb.h b/include/linux/fb.h index 6fe56aaa668..64177ec9a01 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -929,8 +929,6 @@ extern void fb_bl_default_curve(struct fb_info *fb_info, u8 off, u8 min, u8 max) #define FB_MODE_IS_FIRST 16 #define FB_MODE_IS_FROM_VAR 32 -extern int fbmon_valid_timings(u_int pixclock, u_int htotal, u_int vtotal, - const struct fb_info *fb_info); extern int fbmon_dpms(const struct fb_info *fb_info); extern int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_info *info); diff --git a/include/linux/file.h b/include/linux/file.h index 6e77b9177f9..edca361f2ab 100644 --- a/include/linux/file.h +++ b/include/linux/file.h @@ -26,19 +26,12 @@ struct embedded_fd_set { unsigned long fds_bits[1]; }; -/* - * More than this number of fds: we use a separately allocated fd_set - */ -#define EMBEDDED_FD_SET_SIZE (BITS_PER_BYTE * sizeof(struct embedded_fd_set)) - struct fdtable { unsigned int max_fds; - int max_fdset; struct file ** fd; /* current fd array */ fd_set *close_on_exec; fd_set *open_fds; struct rcu_head rcu; - struct files_struct *free_files; struct fdtable *next; }; @@ -83,14 +76,8 @@ extern int get_unused_fd(void); extern void FASTCALL(put_unused_fd(unsigned int fd)); struct kmem_cache; -extern struct file ** alloc_fd_array(int); -extern void free_fd_array(struct file **, int); - -extern fd_set *alloc_fdset(int); -extern void free_fdset(fd_set *, int); - extern int expand_files(struct files_struct *, int nr); -extern void free_fdtable(struct fdtable *fdt); +extern void free_fdtable_rcu(struct rcu_head *rcu); extern void __init files_defer_init(void); static inline struct file * fcheck_files(struct files_struct *files, unsigned int fd) diff --git a/include/linux/freezer.h b/include/linux/freezer.h index 6e05e3e7ce3..5e75e26d478 100644 --- a/include/linux/freezer.h +++ b/include/linux/freezer.h @@ -1,5 +1,7 @@ /* Freezer declarations */ +#include <linux/sched.h> + #ifdef CONFIG_PM /* * Check if a process has been frozen @@ -14,16 +16,15 @@ static inline int frozen(struct task_struct *p) */ static inline int freezing(struct task_struct *p) { - return p->flags & PF_FREEZE; + return test_tsk_thread_flag(p, TIF_FREEZE); } /* * Request that a process be frozen - * FIXME: SMP problem. We may not modify other process' flags! */ static inline void freeze(struct task_struct *p) { - p->flags |= PF_FREEZE; + set_tsk_thread_flag(p, TIF_FREEZE); } /* @@ -31,7 +32,7 @@ static inline void freeze(struct task_struct *p) */ static inline void do_not_freeze(struct task_struct *p) { - p->flags &= ~PF_FREEZE; + clear_tsk_thread_flag(p, TIF_FREEZE); } /* @@ -52,7 +53,9 @@ static inline int thaw_process(struct task_struct *p) */ static inline void frozen_process(struct task_struct *p) { - p->flags = (p->flags & ~PF_FREEZE) | PF_FROZEN; + p->flags |= PF_FROZEN; + wmb(); + clear_tsk_thread_flag(p, TIF_FREEZE); } extern void refrigerator(void); diff --git a/include/linux/fs.h b/include/linux/fs.h index adce6e1d70c..186da813541 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -120,6 +120,7 @@ extern int dir_notify_enable; #define MS_PRIVATE (1<<18) /* change to private */ #define MS_SLAVE (1<<19) /* change to slave */ #define MS_SHARED (1<<20) /* change to shared */ +#define MS_RELATIME (1<<21) /* Update atime relative to mtime/ctime. */ #define MS_ACTIVE (1<<30) #define MS_NOUSER (1<<31) diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 3da29e2d524..abb64c437f6 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -19,6 +19,7 @@ #define _FSL_DEVICE_H_ #include <linux/types.h> +#include <linux/phy.h> /* * Some conventions on how we handle peripherals on Freescale chips diff --git a/include/linux/futex.h b/include/linux/futex.h index d097b5b72bc..3f153b4e156 100644 --- a/include/linux/futex.h +++ b/include/linux/futex.h @@ -93,6 +93,7 @@ struct robust_list_head { */ #define ROBUST_LIST_LIMIT 2048 +#ifdef __KERNEL__ long do_futex(u32 __user *uaddr, int op, u32 val, unsigned long timeout, u32 __user *uaddr2, u32 val2, u32 val3); @@ -110,6 +111,7 @@ static inline void exit_pi_state_list(struct task_struct *curr) { } #endif +#endif /* __KERNEL__ */ #define FUTEX_OP_SET 0 /* *(int *)UADDR2 = OPARG; */ #define FUTEX_OP_ADD 1 /* *(int *)UADDR2 += OPARG; */ diff --git a/include/linux/gameport.h b/include/linux/gameport.h index 2cdba0c2395..afad9527284 100644 --- a/include/linux/gameport.h +++ b/include/linux/gameport.h @@ -105,7 +105,7 @@ static inline void gameport_set_phys(struct gameport *gameport, static inline struct gameport *gameport_allocate_port(void) { - struct gameport *gameport = kcalloc(1, sizeof(struct gameport), GFP_KERNEL); + struct gameport *gameport = kzalloc(sizeof(struct gameport), GFP_KERNEL); return gameport; } diff --git a/include/linux/i2c-algo-bit.h b/include/linux/i2c-algo-bit.h index c8f8df25c7e..937da70cb4c 100644 --- a/include/linux/i2c-algo-bit.h +++ b/include/linux/i2c-algo-bit.h @@ -26,9 +26,9 @@ /* --- Defines for bit-adapters --------------------------------------- */ /* - * This struct contains the hw-dependent functions of bit-style adapters to + * This struct contains the hw-dependent functions of bit-style adapters to * manipulate the line states, and to init any hw-specific features. This is - * only used if you have more than one hw-type of adapter running. + * only used if you have more than one hw-type of adapter running. */ struct i2c_algo_bit_data { void *data; /* private data for lowlevel routines */ @@ -44,6 +44,5 @@ struct i2c_algo_bit_data { }; int i2c_bit_add_bus(struct i2c_adapter *); -int i2c_bit_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_BIT_H */ diff --git a/include/linux/i2c-algo-ite.h b/include/linux/i2c-algo-ite.h deleted file mode 100644 index 0073fe96c76..00000000000 --- a/include/linux/i2c-algo-ite.h +++ /dev/null @@ -1,72 +0,0 @@ -/* ------------------------------------------------------------------------- */ -/* i2c-algo-ite.h i2c driver algorithms for ITE IIC adapters */ -/* ------------------------------------------------------------------------- */ -/* Copyright (C) 1995-97 Simon G. Vogl - 1998-99 Hans Berglund - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* ------------------------------------------------------------------------- */ - -/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even - Frodo Looijaard <frodol@dds.nl> */ - -/* Modifications by MontaVista Software, 2001 - Changes made to support the ITE IIC peripheral */ - - -#ifndef I2C_ALGO_ITE_H -#define I2C_ALGO_ITE_H 1 - -#include <linux/types.h> - -/* Example of a sequential read request: - struct i2c_iic_msg s_msg; - - s_msg.addr=device_address; - s_msg.len=length; - s_msg.buf=buffer; - s_msg.waddr=word_address; - ioctl(file,I2C_SREAD, &s_msg); - */ -#define I2C_SREAD 0x780 /* SREAD ioctl command */ - -struct i2c_iic_msg { - __u16 addr; /* device address */ - __u16 waddr; /* word address */ - short len; /* msg length */ - char *buf; /* pointer to msg data */ -}; - -#ifdef __KERNEL__ -struct i2c_adapter; - -struct i2c_algo_iic_data { - void *data; /* private data for lolevel routines */ - void (*setiic) (void *data, int ctl, int val); - int (*getiic) (void *data, int ctl); - int (*getown) (void *data); - int (*getclock) (void *data); - void (*waitforpin) (void); - - /* local settings */ - int udelay; - int mdelay; - int timeout; -}; - -int i2c_iic_add_bus(struct i2c_adapter *); -int i2c_iic_del_bus(struct i2c_adapter *); -#endif /* __KERNEL__ */ -#endif /* I2C_ALGO_ITE_H */ diff --git a/include/linux/i2c-algo-pca.h b/include/linux/i2c-algo-pca.h index 226693e0d88..fce47c051bb 100644 --- a/include/linux/i2c-algo-pca.h +++ b/include/linux/i2c-algo-pca.h @@ -10,6 +10,5 @@ struct i2c_algo_pca_data { }; int i2c_pca_add_bus(struct i2c_adapter *); -int i2c_pca_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_PCA_H */ diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 9908f3fc483..994eb86f882 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -31,7 +31,7 @@ struct i2c_algo_pcf_data { int (*getpcf) (void *data, int ctl); int (*getown) (void *data); int (*getclock) (void *data); - void (*waitforpin) (void); + void (*waitforpin) (void); /* local settings */ int udelay; @@ -39,6 +39,5 @@ struct i2c_algo_pcf_data { }; int i2c_pcf_add_bus(struct i2c_adapter *); -int i2c_pcf_del_bus(struct i2c_adapter *); #endif /* _LINUX_I2C_ALGO_PCF_H */ diff --git a/include/linux/i2c-algo-sgi.h b/include/linux/i2c-algo-sgi.h index 4a0113d6406..3b7715024e6 100644 --- a/include/linux/i2c-algo-sgi.h +++ b/include/linux/i2c-algo-sgi.h @@ -22,6 +22,5 @@ struct i2c_algo_sgi_data { }; int i2c_sgi_add_bus(struct i2c_adapter *); -int i2c_sgi_del_bus(struct i2c_adapter *); #endif /* I2C_ALGO_SGI_H */ diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 9dc984b5f89..d38778f2fbe 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------- */ -/* */ +/* */ /* i2c-id.h - identifier values for i2c drivers and adapters */ -/* */ +/* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-1999 Simon G. Vogl @@ -40,10 +40,10 @@ #define I2C_DRIVERID_SAA7120 11 /* video encoder */ #define I2C_DRIVERID_SAA7121 12 /* video encoder */ #define I2C_DRIVERID_SAA7185B 13 /* video encoder */ -#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */ +#define I2C_DRIVERID_CH7003 14 /* digital pc to tv encoder */ #define I2C_DRIVERID_PCF8574A 15 /* i2c expander - 8 bit in/out */ #define I2C_DRIVERID_PCF8582C 16 /* eeprom */ -#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */ +#define I2C_DRIVERID_AT24Cxx 17 /* eeprom 1/2/4/8/16 K */ #define I2C_DRIVERID_TEA6300 18 /* audio mixer */ #define I2C_DRIVERID_BT829 19 /* pc to tv encoder */ #define I2C_DRIVERID_TDA9850 20 /* audio mixer */ @@ -82,9 +82,8 @@ #define I2C_DRIVERID_STM41T00 52 /* real time clock */ #define I2C_DRIVERID_UDA1342 53 /* UDA1342 audio codec */ #define I2C_DRIVERID_ADV7170 54 /* video encoder */ -#define I2C_DRIVERID_RADEON 55 /* I2C bus on Radeon boards */ #define I2C_DRIVERID_MAX1617 56 /* temp sensor */ -#define I2C_DRIVERID_SAA7191 57 /* video encoder */ +#define I2C_DRIVERID_SAA7191 57 /* video decoder */ #define I2C_DRIVERID_INDYCAM 58 /* SGI IndyCam */ #define I2C_DRIVERID_BT832 59 /* CMOS camera video processor */ #define I2C_DRIVERID_TDA9887 60 /* TDA988x IF-PLL demodulator */ @@ -132,7 +131,6 @@ #define I2C_DRIVERID_ADM1021 1008 #define I2C_DRIVERID_ADM9240 1009 #define I2C_DRIVERID_LTC1710 1010 -#define I2C_DRIVERID_ICSPLL 1012 #define I2C_DRIVERID_BT869 1013 #define I2C_DRIVERID_MAXILIFE 1014 #define I2C_DRIVERID_MATORB 1015 @@ -158,12 +156,13 @@ #define I2C_DRIVERID_ASB100 1043 #define I2C_DRIVERID_FSCHER 1046 #define I2C_DRIVERID_W83L785TS 1047 +#define I2C_DRIVERID_OV7670 1048 /* Omnivision 7670 camera */ /* * ---- Adapter types ---------------------------------------------------- */ -/* --- Bit algorithm adapters */ +/* --- Bit algorithm adapters */ #define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */ #define I2C_HW_B_SER 0x010002 /* Serial line interface */ #define I2C_HW_B_BT848 0x010005 /* BT848 video boards */ @@ -211,9 +210,6 @@ /* --- MPC8xx PowerPC adapters */ #define I2C_HW_MPC8XX_EPON 0x110000 /* Eponymous MPC8xx I2C adapter */ -/* --- ITE based algorithms */ -#define I2C_HW_I_IIC 0x080000 /* controller on the ITE */ - /* --- PowerPC on-chip adapters */ #define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */ @@ -249,6 +245,7 @@ #define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */ #define I2C_HW_SMBUS_OV519 0x040010 /* OV519 USB 1.1 webcam IC */ #define I2C_HW_SMBUS_OVFX2 0x040011 /* Cypress/OmniVision FX2 webcam */ +#define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */ /* --- ISA pseudo-adapter */ #define I2C_HW_ISA 0x050000 diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h new file mode 100644 index 00000000000..e6e9c814da6 --- /dev/null +++ b/include/linux/i2c-pnx.h @@ -0,0 +1,43 @@ +/* + * Header file for I2C support on PNX010x/4008. + * + * Author: Dennis Kovalev <dkovalev@ru.mvista.com> + * + * 2004-2006 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#ifndef __I2C_PNX_H__ +#define __I2C_PNX_H__ + +#include <asm/arch/i2c.h> + +struct i2c_pnx_mif { + int ret; /* Return value */ + int mode; /* Interface mode */ + struct completion complete; /* I/O completion */ + struct timer_list timer; /* Timeout */ + char * buf; /* Data buffer */ + int len; /* Length of data buffer */ +}; + +struct i2c_pnx_algo_data { + u32 base; + u32 ioaddr; + int irq; + struct i2c_pnx_mif mif; + int last; +}; + +struct i2c_pnx_data { + int (*suspend) (struct platform_device *pdev, pm_message_t state); + int (*resume) (struct platform_device *pdev); + u32 (*calculate_input_freq) (struct platform_device *pdev); + int (*set_clock_run) (struct platform_device *pdev); + int (*set_clock_stop) (struct platform_device *pdev); + struct i2c_adapter *adapter; +}; + +#endif /* __I2C_PNX_H__ */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 9b5d04768c2..71e50d3e492 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -1,7 +1,7 @@ /* ------------------------------------------------------------------------- */ -/* */ +/* */ /* i2c.h - definitions for the i2c-bus interface */ -/* */ +/* */ /* ------------------------------------------------------------------------- */ /* Copyright (C) 1995-2000 Simon G. Vogl @@ -27,7 +27,7 @@ #define _LINUX_I2C_H #include <linux/types.h> -#ifdef __KERNEL__ +#ifdef __KERNEL__ #include <linux/module.h> #include <linux/i2c-id.h> #include <linux/mod_devicetable.h> @@ -53,8 +53,8 @@ union i2c_smbus_data; /* * The master routines are the ones normally used to transmit data to devices - * on a bus (or read from them). Apart from two basic transfer functions to - * transmit one message at a time, a more complex version can be used to + * on a bus (or read from them). Apart from two basic transfer functions to + * transmit one message at a time, a more complex version can be used to * transmit an arbitrary number of messages without interruption. */ extern int i2c_master_send(struct i2c_client *,const char* ,int); @@ -67,10 +67,10 @@ extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) /* This is the very generalized SMBus access routine. You probably do not want to use this, though; one of the functions below may be much easier, - and probably just as fast. + and probably just as fast. Note that we use i2c_adapter here, because you do not need a specific smbus adapter to call this function. */ -extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, +extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); @@ -112,14 +112,14 @@ struct i2c_driver { /* Notifies the driver that a new bus has appeared. This routine * can be used by the driver to test if the bus meets its conditions - * & seek for the presence of the chip(s) it supports. If found, it + * & seek for the presence of the chip(s) it supports. If found, it * registers the client(s) that are on the bus to the i2c admin. via * i2c_attach_client. */ int (*attach_adapter)(struct i2c_adapter *); int (*detach_adapter)(struct i2c_adapter *); - /* tells the driver that a client is about to be deleted & gives it + /* tells the driver that a client is about to be deleted & gives it * the chance to remove its private data. Also, if the client struct * has been dynamically allocated by the driver in the function above, * it must be freed here. @@ -139,13 +139,13 @@ struct i2c_driver { #define I2C_NAME_SIZE 50 /* - * i2c_client identifies a single device (i.e. chip) that is connected to an + * i2c_client identifies a single device (i.e. chip) that is connected to an * i2c bus. The behaviour is defined by the routines of the driver. This * function is mainly used for lookup & other admin. functions. */ struct i2c_client { unsigned int flags; /* div., see below */ - unsigned short addr; /* chip address - NOTE: 7bit */ + unsigned short addr; /* chip address - NOTE: 7bit */ /* addresses are stored in the */ /* _LOWER_ 7 bits */ struct i2c_adapter *adapter; /* the adapter we sit on */ @@ -182,14 +182,14 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data) */ struct i2c_algorithm { /* If an adapter algorithm can't do I2C-level access, set master_xfer - to NULL. If an adapter algorithm can do SMBus access, set + to NULL. If an adapter algorithm can do SMBus access, set smbus_xfer. If set to NULL, the SMBus protocol is simulated using common I2C messages */ /* master_xfer should return the number of messages successfully processed, or a negative value on error */ - int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, + int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, int num); - int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, + int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data); @@ -216,6 +216,7 @@ struct i2c_adapter { int (*client_unregister)(struct i2c_client *); /* data fields that are valid for all devices */ + u8 level; /* nesting level for lockdep */ struct mutex bus_lock; struct mutex clist_lock; @@ -316,7 +317,7 @@ extern int i2c_check_addr (struct i2c_adapter *adapter, int addr); * It will only call found_proc if some client is connected at the * specific address (unless a 'force' matched); */ -extern int i2c_probe(struct i2c_adapter *adapter, +extern int i2c_probe(struct i2c_adapter *adapter, struct i2c_client_address_data *address_data, int (*found_proc) (struct i2c_adapter *, int, int)); @@ -352,15 +353,15 @@ static inline int i2c_adapter_id(struct i2c_adapter *adap) */ struct i2c_msg { __u16 addr; /* slave address */ - __u16 flags; + __u16 flags; #define I2C_M_TEN 0x10 /* we have a ten bit chip address */ #define I2C_M_RD 0x01 #define I2C_M_NOSTART 0x4000 #define I2C_M_REV_DIR_ADDR 0x2000 #define I2C_M_IGNORE_NAK 0x1000 #define I2C_M_NO_RD_ACK 0x0800 - __u16 len; /* msg length */ - __u8 *buf; /* pointer to msg data */ + __u16 len; /* msg length */ + __u8 *buf; /* pointer to msg data */ }; /* To determine what functionality is present */ @@ -370,16 +371,16 @@ struct i2c_msg { #define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ #define I2C_FUNC_SMBUS_HWPEC_CALC 0x00000008 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ -#define I2C_FUNC_SMBUS_QUICK 0x00010000 -#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 -#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 -#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 -#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 -#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 -#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 -#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 -#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 -#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 +#define I2C_FUNC_SMBUS_QUICK 0x00010000 +#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000 +#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000 +#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000 +#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000 +#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000 +#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000 +#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000 +#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000 +#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ #define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */ @@ -406,10 +407,10 @@ struct i2c_msg { I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ I2C_FUNC_SMBUS_I2C_BLOCK) -/* - * Data for SMBus Messages +/* + * Data for SMBus Messages */ -#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ +#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */ union i2c_smbus_data { __u8 byte; __u16 word; @@ -421,11 +422,11 @@ union i2c_smbus_data { #define I2C_SMBUS_READ 1 #define I2C_SMBUS_WRITE 0 -/* SMBus transaction types (size parameter in the above functions) +/* SMBus transaction types (size parameter in the above functions) Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */ #define I2C_SMBUS_QUICK 0 #define I2C_SMBUS_BYTE 1 -#define I2C_SMBUS_BYTE_DATA 2 +#define I2C_SMBUS_BYTE_DATA 2 #define I2C_SMBUS_WORD_DATA 3 #define I2C_SMBUS_PROC_CALL 4 #define I2C_SMBUS_BLOCK_DATA 5 @@ -434,15 +435,15 @@ union i2c_smbus_data { /* ----- commands for the ioctl like i2c_command call: - * note that additional calls are defined in the algorithm and hw - * dependent layers - these can be listed here, or see the + * note that additional calls are defined in the algorithm and hw + * dependent layers - these can be listed here, or see the * corresponding header files. */ /* -> bit-adapter specific ioctls */ #define I2C_RETRIES 0x0701 /* number of times a device address */ /* should be polled when not */ - /* acknowledging */ -#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ + /* acknowledging */ +#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */ /* this is for i2c-dev.c */ diff --git a/include/linux/ide.h b/include/linux/ide.h index 9c2050293f1..e26a03981a9 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -796,6 +796,7 @@ typedef struct hwif_s { unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */ unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */ unsigned err_stops_fifo : 1; /* 1=data FIFO is cleared by an error */ + unsigned atapi_irq_bogon : 1; /* Generates spurious DMA interrupts in PIO mode */ struct device gendev; struct completion gendev_rel_comp; /* To deal with device release() */ @@ -803,8 +804,6 @@ typedef struct hwif_s { void *hwif_data; /* extra hwif data */ unsigned dma; - - void (*led_act)(void *data, int rw); } ____cacheline_internodealigned_in_smp ide_hwif_t; /* diff --git a/include/linux/init.h b/include/linux/init.h index 5eb5d24b768..5a593a1dec1 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -111,6 +111,7 @@ extern void setup_arch(char **); #define subsys_initcall_sync(fn) __define_initcall("4s",fn,4s) #define fs_initcall(fn) __define_initcall("5",fn,5) #define fs_initcall_sync(fn) __define_initcall("5s",fn,5s) +#define rootfs_initcall(fn) __define_initcall("rootfs",fn,rootfs) #define device_initcall(fn) __define_initcall("6",fn,6) #define device_initcall_sync(fn) __define_initcall("6s",fn,6s) #define late_initcall(fn) __define_initcall("7",fn,7) diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 7272ff9ee77..6383d2d83bb 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -12,12 +12,10 @@ #define INIT_FDTABLE \ { \ .max_fds = NR_OPEN_DEFAULT, \ - .max_fdset = EMBEDDED_FD_SET_SIZE, \ .fd = &init_files.fd_array[0], \ .close_on_exec = (fd_set *)&init_files.close_on_exec_init, \ .open_fds = (fd_set *)&init_files.open_fds_init, \ .rcu = RCU_HEAD_INIT, \ - .free_files = NULL, \ .next = NULL, \ } @@ -77,7 +75,6 @@ extern struct nsproxy init_nsproxy; .pid_ns = &init_pid_ns, \ .count = ATOMIC_INIT(1), \ .nslock = __SPIN_LOCK_UNLOCKED(nsproxy.nslock), \ - .id = 0, \ .uts_ns = &init_uts_ns, \ .mnt_ns = NULL, \ INIT_IPC_NS(ipc_ns) \ diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index de7593f4e89..e36e86c869f 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -231,7 +231,8 @@ enum NET_TX_SOFTIRQ, NET_RX_SOFTIRQ, BLOCK_SOFTIRQ, - TASKLET_SOFTIRQ + TASKLET_SOFTIRQ, + SCHED_SOFTIRQ, }; /* softirq mask and active fields moved to irq_cpustat_t in diff --git a/include/linux/kernel.h b/include/linux/kernel.h index e8bfac34d2b..b0c4a05a4b0 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -17,8 +17,6 @@ #include <asm/byteorder.h> #include <asm/bug.h> -extern const char linux_banner[]; - #define INT_MAX ((int)(~0U>>1)) #define INT_MIN (-INT_MAX - 1) #define UINT_MAX (~0U) diff --git a/include/linux/kvm.h b/include/linux/kvm.h new file mode 100644 index 00000000000..5bb2c3c585c --- /dev/null +++ b/include/linux/kvm.h @@ -0,0 +1,227 @@ +#ifndef __LINUX_KVM_H +#define __LINUX_KVM_H + +/* + * Userspace interface for /dev/kvm - kernel based virtual machine + * + * Note: this interface is considered experimental and may change without + * notice. + */ + +#include <asm/types.h> +#include <linux/ioctl.h> + +/* + * Architectural interrupt line count, and the size of the bitmap needed + * to hold them. + */ +#define KVM_NR_INTERRUPTS 256 +#define KVM_IRQ_BITMAP_SIZE_BYTES ((KVM_NR_INTERRUPTS + 7) / 8) +#define KVM_IRQ_BITMAP_SIZE(type) (KVM_IRQ_BITMAP_SIZE_BYTES / sizeof(type)) + + +/* for KVM_CREATE_MEMORY_REGION */ +struct kvm_memory_region { + __u32 slot; + __u32 flags; + __u64 guest_phys_addr; + __u64 memory_size; /* bytes */ +}; + +/* for kvm_memory_region::flags */ +#define KVM_MEM_LOG_DIRTY_PAGES 1UL + + +#define KVM_EXIT_TYPE_FAIL_ENTRY 1 +#define KVM_EXIT_TYPE_VM_EXIT 2 + +enum kvm_exit_reason { + KVM_EXIT_UNKNOWN = 0, + KVM_EXIT_EXCEPTION = 1, + KVM_EXIT_IO = 2, + KVM_EXIT_CPUID = 3, + KVM_EXIT_DEBUG = 4, + KVM_EXIT_HLT = 5, + KVM_EXIT_MMIO = 6, +}; + +/* for KVM_RUN */ +struct kvm_run { + /* in */ + __u32 vcpu; + __u32 emulated; /* skip current instruction */ + __u32 mmio_completed; /* mmio request completed */ + + /* out */ + __u32 exit_type; + __u32 exit_reason; + __u32 instruction_length; + union { + /* KVM_EXIT_UNKNOWN */ + struct { + __u32 hardware_exit_reason; + } hw; + /* KVM_EXIT_EXCEPTION */ + struct { + __u32 exception; + __u32 error_code; + } ex; + /* KVM_EXIT_IO */ + struct { +#define KVM_EXIT_IO_IN 0 +#define KVM_EXIT_IO_OUT 1 + __u8 direction; + __u8 size; /* bytes */ + __u8 string; + __u8 string_down; + __u8 rep; + __u8 pad; + __u16 port; + __u64 count; + union { + __u64 address; + __u32 value; + }; + } io; + struct { + } debug; + /* KVM_EXIT_MMIO */ + struct { + __u64 phys_addr; + __u8 data[8]; + __u32 len; + __u8 is_write; + } mmio; + }; +}; + +/* for KVM_GET_REGS and KVM_SET_REGS */ +struct kvm_regs { + /* in */ + __u32 vcpu; + __u32 padding; + + /* out (KVM_GET_REGS) / in (KVM_SET_REGS) */ + __u64 rax, rbx, rcx, rdx; + __u64 rsi, rdi, rsp, rbp; + __u64 r8, r9, r10, r11; + __u64 r12, r13, r14, r15; + __u64 rip, rflags; +}; + +struct kvm_segment { + __u64 base; + __u32 limit; + __u16 selector; + __u8 type; + __u8 present, dpl, db, s, l, g, avl; + __u8 unusable; + __u8 padding; +}; + +struct kvm_dtable { + __u64 base; + __u16 limit; + __u16 padding[3]; +}; + +/* for KVM_GET_SREGS and KVM_SET_SREGS */ +struct kvm_sregs { + /* in */ + __u32 vcpu; + __u32 padding; + + /* out (KVM_GET_SREGS) / in (KVM_SET_SREGS) */ + struct kvm_segment cs, ds, es, fs, gs, ss; + struct kvm_segment tr, ldt; + struct kvm_dtable gdt, idt; + __u64 cr0, cr2, cr3, cr4, cr8; + __u64 efer; + __u64 apic_base; + __u64 interrupt_bitmap[KVM_IRQ_BITMAP_SIZE(__u64)]; +}; + +struct kvm_msr_entry { + __u32 index; + __u32 reserved; + __u64 data; +}; + +/* for KVM_GET_MSRS and KVM_SET_MSRS */ +struct kvm_msrs { + __u32 vcpu; + __u32 nmsrs; /* number of msrs in entries */ + + struct kvm_msr_entry entries[0]; +}; + +/* for KVM_GET_MSR_INDEX_LIST */ +struct kvm_msr_list { + __u32 nmsrs; /* number of msrs in entries */ + __u32 indices[0]; +}; + +/* for KVM_TRANSLATE */ +struct kvm_translation { + /* in */ + __u64 linear_address; + __u32 vcpu; + __u32 padding; + + /* out */ + __u64 physical_address; + __u8 valid; + __u8 writeable; + __u8 usermode; +}; + +/* for KVM_INTERRUPT */ +struct kvm_interrupt { + /* in */ + __u32 vcpu; + __u32 irq; +}; + +struct kvm_breakpoint { + __u32 enabled; + __u32 padding; + __u64 address; +}; + +/* for KVM_DEBUG_GUEST */ +struct kvm_debug_guest { + /* int */ + __u32 vcpu; + __u32 enabled; + struct kvm_breakpoint breakpoints[4]; + __u32 singlestep; +}; + +/* for KVM_GET_DIRTY_LOG */ +struct kvm_dirty_log { + __u32 slot; + __u32 padding; + union { + void __user *dirty_bitmap; /* one bit per page */ + __u64 padding; + }; +}; + +#define KVMIO 0xAE + +#define KVM_RUN _IOWR(KVMIO, 2, struct kvm_run) +#define KVM_GET_REGS _IOWR(KVMIO, 3, struct kvm_regs) +#define KVM_SET_REGS _IOW(KVMIO, 4, struct kvm_regs) +#define KVM_GET_SREGS _IOWR(KVMIO, 5, struct kvm_sregs) +#define KVM_SET_SREGS _IOW(KVMIO, 6, struct kvm_sregs) +#define KVM_TRANSLATE _IOWR(KVMIO, 7, struct kvm_translation) +#define KVM_INTERRUPT _IOW(KVMIO, 8, struct kvm_interrupt) +#define KVM_DEBUG_GUEST _IOW(KVMIO, 9, struct kvm_debug_guest) +#define KVM_SET_MEMORY_REGION _IOW(KVMIO, 10, struct kvm_memory_region) +#define KVM_CREATE_VCPU _IOW(KVMIO, 11, int /* vcpu_slot */) +#define KVM_GET_DIRTY_LOG _IOW(KVMIO, 12, struct kvm_dirty_log) +#define KVM_GET_MSRS _IOWR(KVMIO, 13, struct kvm_msrs) +#define KVM_SET_MSRS _IOWR(KVMIO, 14, struct kvm_msrs) +#define KVM_GET_MSR_INDEX_LIST _IOWR(KVMIO, 15, struct kvm_msr_list) + +#endif diff --git a/include/linux/lockd/bind.h b/include/linux/lockd/bind.h index aa50d89eacd..246de1d84a2 100644 --- a/include/linux/lockd/bind.h +++ b/include/linux/lockd/bind.h @@ -23,7 +23,7 @@ struct svc_rqst; * This is the set of functions for lockd->nfsd communication */ struct nlmsvc_binding { - u32 (*fopen)(struct svc_rqst *, + __be32 (*fopen)(struct svc_rqst *, struct nfs_fh *, struct file **); void (*fclose)(struct file *); diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h index 0c962b82a9d..ac25b5649c5 100644 --- a/include/linux/lockd/lockd.h +++ b/include/linux/lockd/lockd.h @@ -191,7 +191,7 @@ __be32 nlmsvc_cancel_blocked(struct nlm_file *, struct nlm_lock *); unsigned long nlmsvc_retry_blocked(void); void nlmsvc_traverse_blocks(struct nlm_host *, struct nlm_file *, nlm_host_match_fn_t match); -void nlmsvc_grant_reply(struct nlm_cookie *, u32); +void nlmsvc_grant_reply(struct nlm_cookie *, __be32); /* * File handling for the server personality diff --git a/include/linux/lockd/sm_inter.h b/include/linux/lockd/sm_inter.h index fc61d40964d..22a645828f2 100644 --- a/include/linux/lockd/sm_inter.h +++ b/include/linux/lockd/sm_inter.h @@ -24,7 +24,7 @@ * Arguments for all calls to statd */ struct nsm_args { - u32 addr; /* remote address */ + __be32 addr; /* remote address */ u32 prog; /* RPC callback info */ u32 vers; u32 proc; diff --git a/include/linux/lockd/xdr.h b/include/linux/lockd/xdr.h index 29e7d9fc9da..83a1f9f6237 100644 --- a/include/linux/lockd/xdr.h +++ b/include/linux/lockd/xdr.h @@ -69,7 +69,7 @@ typedef struct nlm_args nlm_args; */ struct nlm_res { struct nlm_cookie cookie; - u32 status; + __be32 status; struct nlm_lock lock; }; @@ -80,9 +80,9 @@ struct nlm_reboot { char * mon; int len; u32 state; - u32 addr; - u32 vers; - u32 proto; + __be32 addr; + __be32 vers; + __be32 proto; }; /* diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index 498bfbd3b4e..ea097dddc44 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -281,15 +281,25 @@ struct lock_class_key { }; #if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_GENERIC_HARDIRQS) extern void early_init_irq_lock_class(void); #else -# define early_init_irq_lock_class() do { } while (0) +static inline void early_init_irq_lock_class(void) +{ +} #endif #ifdef CONFIG_TRACE_IRQFLAGS extern void early_boot_irqs_off(void); extern void early_boot_irqs_on(void); +extern void print_irqtrace_events(struct task_struct *curr); #else -# define early_boot_irqs_off() do { } while (0) -# define early_boot_irqs_on() do { } while (0) +static inline void early_boot_irqs_off(void) +{ +} +static inline void early_boot_irqs_on(void) +{ +} +static inline void print_irqtrace_events(struct task_struct *curr) +{ +} #endif /* diff --git a/include/linux/mount.h b/include/linux/mount.h index e357dc86a4d..1b7e178b0d8 100644 --- a/include/linux/mount.h +++ b/include/linux/mount.h @@ -27,6 +27,7 @@ struct mnt_namespace; #define MNT_NOEXEC 0x04 #define MNT_NOATIME 0x08 #define MNT_NODIRATIME 0x10 +#define MNT_RELATIME 0x20 #define MNT_SHRINKABLE 0x100 diff --git a/include/linux/n_r3964.h b/include/linux/n_r3964.h index db4f3776978..de24af79ebd 100644 --- a/include/linux/n_r3964.h +++ b/include/linux/n_r3964.h @@ -116,7 +116,7 @@ struct r3964_message; struct r3964_client_info { spinlock_t lock; - pid_t pid; + struct pid *pid; unsigned int sig_flags; struct r3964_client_info *next; diff --git a/include/linux/ncp_mount.h b/include/linux/ncp_mount.h index f46bddcdbd3..a2b549eb1ec 100644 --- a/include/linux/ncp_mount.h +++ b/include/linux/ncp_mount.h @@ -75,7 +75,7 @@ struct ncp_mount_data_kernel { unsigned int int_flags; /* internal flags */ #define NCP_IMOUNT_LOGGEDIN_POSSIBLE 0x0001 __kernel_uid32_t mounted_uid; /* Who may umount() this filesystem? */ - __kernel_pid_t wdog_pid; /* Who cares for our watchdog packets? */ + struct pid *wdog_pid; /* Who cares for our watchdog packets? */ unsigned int ncp_fd; /* The socket to the ncp port */ unsigned int time_out; /* How long should I wait after sending a NCP request? */ diff --git a/include/linux/nfsd/nfsd.h b/include/linux/nfsd/nfsd.h index edb54c3171b..0727774772b 100644 --- a/include/linux/nfsd/nfsd.h +++ b/include/linux/nfsd/nfsd.h @@ -275,12 +275,12 @@ static inline int is_fsid(struct svc_fh *fh, struct knfsd_fh *reffh) * we might process an operation with side effects, and be unable to * tell the client that the operation succeeded. * - * COMPOUND_SLACK_SPACE - this is the minimum amount of buffer space + * COMPOUND_SLACK_SPACE - this is the minimum bytes of buffer space * needed to encode an "ordinary" _successful_ operation. (GETATTR, * READ, READDIR, and READLINK have their own buffer checks.) if we * fall below this level, we fail the next operation with NFS4ERR_RESOURCE. * - * COMPOUND_ERR_SLACK_SPACE - this is the minimum amount of buffer space + * COMPOUND_ERR_SLACK_SPACE - this is the minimum bytes of buffer space * needed to encode an operation which has failed with NFS4ERR_RESOURCE. * care is taken to ensure that we never fall below this level for any * reason. diff --git a/include/linux/nfsd/state.h b/include/linux/nfsd/state.h index c3673f487e8..ab5c236bd9a 100644 --- a/include/linux/nfsd/state.h +++ b/include/linux/nfsd/state.h @@ -273,7 +273,6 @@ struct nfs4_stateid { ((err) != nfserr_stale_stateid) && \ ((err) != nfserr_bad_stateid)) -extern __be32 nfsd4_renew(clientid_t *clid); extern __be32 nfs4_preprocess_stateid_op(struct svc_fh *current_fh, stateid_t *stateid, int flags, struct file **filp); extern void nfs4_lock_state(void); diff --git a/include/linux/nfsd/xdr4.h b/include/linux/nfsd/xdr4.h index 45ca01b5f84..09799bcee0a 100644 --- a/include/linux/nfsd/xdr4.h +++ b/include/linux/nfsd/xdr4.h @@ -44,6 +44,12 @@ #define NFSD4_MAX_TAGLEN 128 #define XDR_LEN(n) (((n) + 3) & ~3) +struct nfsd4_compound_state { + struct svc_fh current_fh; + struct svc_fh save_fh; + struct nfs4_stateowner *replay_owner; +}; + struct nfsd4_change_info { u32 atomic; u32 before_ctime_sec; @@ -430,35 +436,39 @@ __be32 nfsd4_encode_fattr(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry, __be32 *buffer, int *countp, u32 *bmval, struct svc_rqst *); extern __be32 nfsd4_setclientid(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, struct nfsd4_setclientid *setclid); extern __be32 nfsd4_setclientid_confirm(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, struct nfsd4_setclientid_confirm *setclientid_confirm); extern __be32 nfsd4_process_open1(struct nfsd4_open *open); extern __be32 nfsd4_process_open2(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_open *open); extern __be32 nfsd4_open_confirm(struct svc_rqst *rqstp, - struct svc_fh *current_fh, struct nfsd4_open_confirm *oc, - struct nfs4_stateowner **); -extern __be32 nfsd4_close(struct svc_rqst *rqstp, struct svc_fh *current_fh, - struct nfsd4_close *close, - struct nfs4_stateowner **replay_owner); + struct nfsd4_compound_state *, struct nfsd4_open_confirm *oc); +extern __be32 nfsd4_close(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, + struct nfsd4_close *close); extern __be32 nfsd4_open_downgrade(struct svc_rqst *rqstp, - struct svc_fh *current_fh, struct nfsd4_open_downgrade *od, - struct nfs4_stateowner **replay_owner); -extern __be32 nfsd4_lock(struct svc_rqst *rqstp, struct svc_fh *current_fh, - struct nfsd4_lock *lock, - struct nfs4_stateowner **replay_owner); -extern __be32 nfsd4_lockt(struct svc_rqst *rqstp, struct svc_fh *current_fh, + struct nfsd4_compound_state *, + struct nfsd4_open_downgrade *od); +extern __be32 nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *, + struct nfsd4_lock *lock); +extern __be32 nfsd4_lockt(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, struct nfsd4_lockt *lockt); -extern __be32 nfsd4_locku(struct svc_rqst *rqstp, struct svc_fh *current_fh, - struct nfsd4_locku *locku, - struct nfs4_stateowner **replay_owner); +extern __be32 nfsd4_locku(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, + struct nfsd4_locku *locku); extern __be32 nfsd4_release_lockowner(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, struct nfsd4_release_lockowner *rlockowner); extern void nfsd4_release_compoundargs(struct nfsd4_compoundargs *); extern __be32 nfsd4_delegreturn(struct svc_rqst *rqstp, - struct svc_fh *current_fh, struct nfsd4_delegreturn *dr); + struct nfsd4_compound_state *, struct nfsd4_delegreturn *dr); +extern __be32 nfsd4_renew(struct svc_rqst *rqstp, + struct nfsd4_compound_state *, clientid_t *clid); #endif /* diff --git a/include/linux/nsproxy.h b/include/linux/nsproxy.h index fdfb0e44912..0b9f0dc30d6 100644 --- a/include/linux/nsproxy.h +++ b/include/linux/nsproxy.h @@ -24,7 +24,6 @@ struct pid_namespace; struct nsproxy { atomic_t count; spinlock_t nslock; - unsigned long id; struct uts_namespace *uts_ns; struct ipc_namespace *ipc_ns; struct mnt_namespace *mnt_ns; diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index ea4f7cd7bfd..2e19478e9e8 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -12,7 +12,7 @@ struct pipe_buffer { struct page *page; unsigned int offset, len; - struct pipe_buf_operations *ops; + const struct pipe_buf_operations *ops; unsigned int flags; }; @@ -41,9 +41,7 @@ struct pipe_buf_operations { struct pipe_inode_info { wait_queue_head_t wait; unsigned int nrbufs, curbuf; - struct pipe_buffer bufs[PIPE_BUFFERS]; struct page *tmp_page; - unsigned int start; unsigned int readers; unsigned int writers; unsigned int waiting_writers; @@ -52,6 +50,7 @@ struct pipe_inode_info { struct fasync_struct *fasync_readers; struct fasync_struct *fasync_writers; struct inode *inode; + struct pipe_buffer bufs[PIPE_BUFFERS]; }; /* Differs from PIPE_BUF in that PIPE_SIZE is the length of the actual diff --git a/include/linux/raid/raid5.h b/include/linux/raid/raid5.h index 03636d7918f..d8286db60b9 100644 --- a/include/linux/raid/raid5.h +++ b/include/linux/raid/raid5.h @@ -227,7 +227,10 @@ struct raid5_private_data { struct list_head handle_list; /* stripes needing handling */ struct list_head delayed_list; /* stripes that have plugged requests */ struct list_head bitmap_list; /* stripes delaying awaiting bitmap update */ + struct bio *retry_read_aligned; /* currently retrying aligned bios */ + struct bio *retry_read_aligned_list; /* aligned bios retry list */ atomic_t preread_active_stripes; /* stripes with scheduled io */ + atomic_t active_aligned_reads; atomic_t reshape_stripes; /* stripes with pending writes for reshape */ /* unfortunately we need two cache names as we temporarily have diff --git a/include/linux/reciprocal_div.h b/include/linux/reciprocal_div.h new file mode 100644 index 00000000000..f9c90b33285 --- /dev/null +++ b/include/linux/reciprocal_div.h @@ -0,0 +1,32 @@ +#ifndef _LINUX_RECIPROCAL_DIV_H +#define _LINUX_RECIPROCAL_DIV_H + +#include <linux/types.h> + +/* + * This file describes reciprocical division. + * + * This optimizes the (A/B) problem, when A and B are two u32 + * and B is a known value (but not known at compile time) + * + * The math principle used is : + * Let RECIPROCAL_VALUE(B) be (((1LL << 32) + (B - 1))/ B) + * Then A / B = (u32)(((u64)(A) * (R)) >> 32) + * + * This replaces a divide by a multiply (and a shift), and + * is generally less expensive in CPU cycles. + */ + +/* + * Computes the reciprocal value (R) for the value B of the divisor. + * Should not be called before each reciprocal_divide(), + * or else the performance is slower than a normal divide. + */ +extern u32 reciprocal_value(u32 B); + + +static inline u32 reciprocal_divide(u32 A, u32 R) +{ + return (u32)(((u64)A * R) >> 32); +} +#endif diff --git a/include/linux/rtc.h b/include/linux/rtc.h index 09ff4c3e271..5e22d4510d1 100644 --- a/include/linux/rtc.h +++ b/include/linux/rtc.h @@ -106,6 +106,7 @@ extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year extern int rtc_valid_tm(struct rtc_time *tm); extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time); extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm); +extern void rtc_merge_alarm(struct rtc_time *now, struct rtc_time *alarm); #include <linux/device.h> #include <linux/seq_file.h> diff --git a/include/linux/sched.h b/include/linux/sched.h index ad9c46071ff..44637353519 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -82,6 +82,7 @@ struct sched_param { #include <linux/resource.h> #include <linux/timer.h> #include <linux/hrtimer.h> +#include <linux/task_io_accounting.h> #include <asm/processor.h> @@ -647,6 +648,7 @@ enum idle_type #define SD_SHARE_CPUPOWER 128 /* Domain members share cpu power */ #define SD_POWERSAVINGS_BALANCE 256 /* Balance for power savings */ #define SD_SHARE_PKG_RESOURCES 512 /* Domain members share cpu pkg resources */ +#define SD_SERIALIZE 1024 /* Only a single load balancing instance */ #define BALANCE_FOR_MC_POWER \ (sched_smt_power_savings ? SD_POWERSAVINGS_BALANCE : 0) @@ -1013,6 +1015,7 @@ struct task_struct { wait_queue_t *io_wait; /* i/o counters(bytes read/written, #syscalls */ u64 rchar, wchar, syscr, syscw; + struct task_io_accounting ioac; #if defined(CONFIG_TASK_XACCT) u64 acct_rss_mem1; /* accumulated rss usage */ u64 acct_vm_mem1; /* accumulated virtual memory usage */ @@ -1141,7 +1144,6 @@ static inline void put_task_struct(struct task_struct *t) #define PF_MEMALLOC 0x00000800 /* Allocating memory */ #define PF_FLUSHER 0x00001000 /* responsible for disk writeback */ #define PF_USED_MATH 0x00002000 /* if unset the fpu must be initialized before use */ -#define PF_FREEZE 0x00004000 /* this task is being frozen for suspend now */ #define PF_NOFREEZE 0x00008000 /* this thread should not be frozen */ #define PF_FROZEN 0x00010000 /* frozen for system suspend */ #define PF_FSTRANS 0x00020000 /* inside a filesystem transaction */ diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h index 46000936f8f..6b0648cfdff 100644 --- a/include/linux/seqlock.h +++ b/include/linux/seqlock.h @@ -44,8 +44,11 @@ typedef struct { #define SEQLOCK_UNLOCKED \ __SEQLOCK_UNLOCKED(old_style_seqlock_init) -#define seqlock_init(x) \ - do { *(x) = (seqlock_t) __SEQLOCK_UNLOCKED(x); } while (0) +#define seqlock_init(x) \ + do { \ + (x)->sequence = 0; \ + spin_lock_init(&(x)->lock); \ + } while (0) #define DEFINE_SEQLOCK(x) \ seqlock_t x = __SEQLOCK_UNLOCKED(x) diff --git a/include/linux/slab.h b/include/linux/slab.h index 2271886744f..1ef822e31c7 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -1,7 +1,9 @@ /* - * linux/include/linux/slab.h - * Written by Mark Hemment, 1996. - * (markhe@nextd.demon.co.uk) + * Written by Mark Hemment, 1996 (markhe@nextd.demon.co.uk). + * + * (C) SGI 2006, Christoph Lameter <clameter@sgi.com> + * Cleaned up and restructured to ease the addition of alternative + * implementations of SLAB allocators. */ #ifndef _LINUX_SLAB_H @@ -10,64 +12,95 @@ #ifdef __KERNEL__ #include <linux/gfp.h> -#include <linux/init.h> #include <linux/types.h> -#include <asm/page.h> /* kmalloc_sizes.h needs PAGE_SIZE */ -#include <asm/cache.h> /* kmalloc_sizes.h needs L1_CACHE_BYTES */ -#include <linux/compiler.h> -/* kmem_cache_t exists for legacy reasons and is not used by code in mm */ typedef struct kmem_cache kmem_cache_t __deprecated; -/* flags to pass to kmem_cache_create(). - * The first 3 are only valid when the allocator as been build - * SLAB_DEBUG_SUPPORT. +/* + * Flags to pass to kmem_cache_create(). + * The ones marked DEBUG are only valid if CONFIG_SLAB_DEBUG is set. */ -#define SLAB_DEBUG_FREE 0x00000100UL /* Peform (expensive) checks on free */ -#define SLAB_DEBUG_INITIAL 0x00000200UL /* Call constructor (as verifier) */ -#define SLAB_RED_ZONE 0x00000400UL /* Red zone objs in a cache */ -#define SLAB_POISON 0x00000800UL /* Poison objects */ -#define SLAB_HWCACHE_ALIGN 0x00002000UL /* align objs on a h/w cache lines */ -#define SLAB_CACHE_DMA 0x00004000UL /* use GFP_DMA memory */ -#define SLAB_MUST_HWCACHE_ALIGN 0x00008000UL /* force alignment */ -#define SLAB_STORE_USER 0x00010000UL /* store the last owner for bug hunting */ -#define SLAB_RECLAIM_ACCOUNT 0x00020000UL /* track pages allocated to indicate - what is reclaimable later*/ -#define SLAB_PANIC 0x00040000UL /* panic if kmem_cache_create() fails */ -#define SLAB_DESTROY_BY_RCU 0x00080000UL /* defer freeing pages to RCU */ +#define SLAB_DEBUG_FREE 0x00000100UL /* DEBUG: Perform (expensive) checks on free */ +#define SLAB_DEBUG_INITIAL 0x00000200UL /* DEBUG: Call constructor (as verifier) */ +#define SLAB_RED_ZONE 0x00000400UL /* DEBUG: Red zone objs in a cache */ +#define SLAB_POISON 0x00000800UL /* DEBUG: Poison objects */ +#define SLAB_HWCACHE_ALIGN 0x00002000UL /* Align objs on cache lines */ +#define SLAB_CACHE_DMA 0x00004000UL /* Use GFP_DMA memory */ +#define SLAB_MUST_HWCACHE_ALIGN 0x00008000UL /* Force alignment even if debuggin is active */ +#define SLAB_STORE_USER 0x00010000UL /* DEBUG: Store the last owner for bug hunting */ +#define SLAB_RECLAIM_ACCOUNT 0x00020000UL /* Objects are reclaimable */ +#define SLAB_PANIC 0x00040000UL /* Panic if kmem_cache_create() fails */ +#define SLAB_DESTROY_BY_RCU 0x00080000UL /* Defer freeing slabs to RCU */ #define SLAB_MEM_SPREAD 0x00100000UL /* Spread some memory over cpuset */ -/* flags passed to a constructor func */ -#define SLAB_CTOR_CONSTRUCTOR 0x001UL /* if not set, then deconstructor */ -#define SLAB_CTOR_ATOMIC 0x002UL /* tell constructor it can't sleep */ -#define SLAB_CTOR_VERIFY 0x004UL /* tell constructor it's a verify call */ +/* Flags passed to a constructor functions */ +#define SLAB_CTOR_CONSTRUCTOR 0x001UL /* If not set, then deconstructor */ +#define SLAB_CTOR_ATOMIC 0x002UL /* Tell constructor it can't sleep */ +#define SLAB_CTOR_VERIFY 0x004UL /* Tell constructor it's a verify call */ -#ifndef CONFIG_SLOB - -/* prototypes */ -extern void __init kmem_cache_init(void); +/* + * struct kmem_cache related prototypes + */ +void __init kmem_cache_init(void); +extern int slab_is_available(void); -extern struct kmem_cache *kmem_cache_create(const char *, size_t, size_t, +struct kmem_cache *kmem_cache_create(const char *, size_t, size_t, unsigned long, void (*)(void *, struct kmem_cache *, unsigned long), void (*)(void *, struct kmem_cache *, unsigned long)); -extern void kmem_cache_destroy(struct kmem_cache *); -extern int kmem_cache_shrink(struct kmem_cache *); -extern void *kmem_cache_alloc(struct kmem_cache *, gfp_t); -extern void *kmem_cache_zalloc(struct kmem_cache *, gfp_t); -extern void kmem_cache_free(struct kmem_cache *, void *); -extern unsigned int kmem_cache_size(struct kmem_cache *); -extern const char *kmem_cache_name(struct kmem_cache *); +void kmem_cache_destroy(struct kmem_cache *); +int kmem_cache_shrink(struct kmem_cache *); +void *kmem_cache_alloc(struct kmem_cache *, gfp_t); +void *kmem_cache_zalloc(struct kmem_cache *, gfp_t); +void kmem_cache_free(struct kmem_cache *, void *); +unsigned int kmem_cache_size(struct kmem_cache *); +const char *kmem_cache_name(struct kmem_cache *); +int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr); + +#ifdef CONFIG_NUMA +extern void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node); +#else +static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep, + gfp_t flags, int node) +{ + return kmem_cache_alloc(cachep, flags); +} +#endif + +/* + * Common kmalloc functions provided by all allocators + */ +void *__kmalloc(size_t, gfp_t); +void *__kzalloc(size_t, gfp_t); +void kfree(const void *); +unsigned int ksize(const void *); + +/** + * kcalloc - allocate memory for an array. The memory is set to zero. + * @n: number of elements. + * @size: element size. + * @flags: the type of memory to allocate. + */ +static inline void *kcalloc(size_t n, size_t size, gfp_t flags) +{ + if (n != 0 && size > ULONG_MAX / n) + return NULL; + return __kzalloc(n * size, flags); +} -/* Size description struct for general caches. */ -struct cache_sizes { - size_t cs_size; - struct kmem_cache *cs_cachep; - struct kmem_cache *cs_dmacachep; -}; -extern struct cache_sizes malloc_sizes[]; +/* + * Allocator specific definitions. These are mainly used to establish optimized + * ways to convert kmalloc() calls to kmem_cache_alloc() invocations by selecting + * the appropriate general cache at compile time. + */ -extern void *__kmalloc(size_t, gfp_t); +#ifdef CONFIG_SLAB +#include <linux/slab_def.h> +#else +/* + * Fallback definitions for an allocator not wanting to provide + * its own optimized kmalloc definitions (like SLOB). + */ /** * kmalloc - allocate memory @@ -116,46 +149,9 @@ extern void *__kmalloc(size_t, gfp_t); */ static inline void *kmalloc(size_t size, gfp_t flags) { - if (__builtin_constant_p(size)) { - int i = 0; -#define CACHE(x) \ - if (size <= x) \ - goto found; \ - else \ - i++; -#include "kmalloc_sizes.h" -#undef CACHE - { - extern void __you_cannot_kmalloc_that_much(void); - __you_cannot_kmalloc_that_much(); - } -found: - return kmem_cache_alloc((flags & GFP_DMA) ? - malloc_sizes[i].cs_dmacachep : - malloc_sizes[i].cs_cachep, flags); - } return __kmalloc(size, flags); } -/* - * kmalloc_track_caller is a special version of kmalloc that records the - * calling function of the routine calling it for slab leak tracking instead - * of just the calling function (confusing, eh?). - * It's useful when the call to kmalloc comes from a widely-used standard - * allocator where we care about the real place the memory allocation - * request comes from. - */ -#ifndef CONFIG_DEBUG_SLAB -#define kmalloc_track_caller(size, flags) \ - __kmalloc(size, flags) -#else -extern void *__kmalloc_track_caller(size_t, gfp_t, void*); -#define kmalloc_track_caller(size, flags) \ - __kmalloc_track_caller(size, flags, __builtin_return_address(0)) -#endif - -extern void *__kzalloc(size_t, gfp_t); - /** * kzalloc - allocate memory. The memory is set to zero. * @size: how many bytes of memory are required. @@ -163,72 +159,41 @@ extern void *__kzalloc(size_t, gfp_t); */ static inline void *kzalloc(size_t size, gfp_t flags) { - if (__builtin_constant_p(size)) { - int i = 0; -#define CACHE(x) \ - if (size <= x) \ - goto found; \ - else \ - i++; -#include "kmalloc_sizes.h" -#undef CACHE - { - extern void __you_cannot_kzalloc_that_much(void); - __you_cannot_kzalloc_that_much(); - } -found: - return kmem_cache_zalloc((flags & GFP_DMA) ? - malloc_sizes[i].cs_dmacachep : - malloc_sizes[i].cs_cachep, flags); - } return __kzalloc(size, flags); } +#endif -/** - * kcalloc - allocate memory for an array. The memory is set to zero. - * @n: number of elements. - * @size: element size. - * @flags: the type of memory to allocate. - */ -static inline void *kcalloc(size_t n, size_t size, gfp_t flags) +#ifndef CONFIG_NUMA +static inline void *kmalloc_node(size_t size, gfp_t flags, int node) { - if (n != 0 && size > ULONG_MAX / n) - return NULL; - return kzalloc(n * size, flags); + return kmalloc(size, flags); } -extern void kfree(const void *); -extern unsigned int ksize(const void *); -extern int slab_is_available(void); - -#ifdef CONFIG_NUMA -extern void *kmem_cache_alloc_node(struct kmem_cache *, gfp_t flags, int node); -extern void *__kmalloc_node(size_t size, gfp_t flags, int node); - -static inline void *kmalloc_node(size_t size, gfp_t flags, int node) +static inline void *__kmalloc_node(size_t size, gfp_t flags, int node) { - if (__builtin_constant_p(size)) { - int i = 0; -#define CACHE(x) \ - if (size <= x) \ - goto found; \ - else \ - i++; -#include "kmalloc_sizes.h" -#undef CACHE - { - extern void __you_cannot_kmalloc_that_much(void); - __you_cannot_kmalloc_that_much(); - } -found: - return kmem_cache_alloc_node((flags & GFP_DMA) ? - malloc_sizes[i].cs_dmacachep : - malloc_sizes[i].cs_cachep, flags, node); - } - return __kmalloc_node(size, flags, node); + return __kmalloc(size, flags); } +#endif /* !CONFIG_NUMA */ /* + * kmalloc_track_caller is a special version of kmalloc that records the + * calling function of the routine calling it for slab leak tracking instead + * of just the calling function (confusing, eh?). + * It's useful when the call to kmalloc comes from a widely-used standard + * allocator where we care about the real place the memory allocation + * request comes from. + */ +#ifdef CONFIG_DEBUG_SLAB +extern void *__kmalloc_track_caller(size_t, gfp_t, void*); +#define kmalloc_track_caller(size, flags) \ + __kmalloc_track_caller(size, flags, __builtin_return_address(0)) +#else +#define kmalloc_track_caller(size, flags) \ + __kmalloc(size, flags) +#endif /* DEBUG_SLAB */ + +#ifdef CONFIG_NUMA +/* * kmalloc_node_track_caller is a special version of kmalloc_node that * records the calling function of the routine calling it for slab leak * tracking instead of just the calling function (confusing, eh?). @@ -236,70 +201,23 @@ found: * standard allocator where we care about the real place the memory * allocation request comes from. */ -#ifndef CONFIG_DEBUG_SLAB -#define kmalloc_node_track_caller(size, flags, node) \ - __kmalloc_node(size, flags, node) -#else +#ifdef CONFIG_DEBUG_SLAB extern void *__kmalloc_node_track_caller(size_t, gfp_t, int, void *); #define kmalloc_node_track_caller(size, flags, node) \ __kmalloc_node_track_caller(size, flags, node, \ __builtin_return_address(0)) +#else +#define kmalloc_node_track_caller(size, flags, node) \ + __kmalloc_node(size, flags, node) #endif + #else /* CONFIG_NUMA */ -static inline void *kmem_cache_alloc_node(struct kmem_cache *cachep, - gfp_t flags, int node) -{ - return kmem_cache_alloc(cachep, flags); -} -static inline void *kmalloc_node(size_t size, gfp_t flags, int node) -{ - return kmalloc(size, flags); -} #define kmalloc_node_track_caller(size, flags, node) \ kmalloc_track_caller(size, flags) -#endif -extern int FASTCALL(kmem_cache_reap(int)); -extern int FASTCALL(kmem_ptr_validate(struct kmem_cache *cachep, void *ptr)); - -#else /* CONFIG_SLOB */ - -/* SLOB allocator routines */ - -void kmem_cache_init(void); -struct kmem_cache *kmem_cache_create(const char *c, size_t, size_t, - unsigned long, - void (*)(void *, struct kmem_cache *, unsigned long), - void (*)(void *, struct kmem_cache *, unsigned long)); -void kmem_cache_destroy(struct kmem_cache *c); -void *kmem_cache_alloc(struct kmem_cache *c, gfp_t flags); -void *kmem_cache_zalloc(struct kmem_cache *, gfp_t); -void kmem_cache_free(struct kmem_cache *c, void *b); -const char *kmem_cache_name(struct kmem_cache *); -void *kmalloc(size_t size, gfp_t flags); -void *__kzalloc(size_t size, gfp_t flags); -void kfree(const void *m); -unsigned int ksize(const void *m); -unsigned int kmem_cache_size(struct kmem_cache *c); - -static inline void *kcalloc(size_t n, size_t size, gfp_t flags) -{ - return __kzalloc(n * size, flags); -} - -#define kmem_cache_shrink(d) (0) -#define kmem_cache_reap(a) -#define kmem_ptr_validate(a, b) (0) -#define kmem_cache_alloc_node(c, f, n) kmem_cache_alloc(c, f) -#define kmalloc_node(s, f, n) kmalloc(s, f) -#define kzalloc(s, f) __kzalloc(s, f) -#define kmalloc_track_caller kmalloc - -#define kmalloc_node_track_caller kmalloc_node - -#endif /* CONFIG_SLOB */ +#endif /* DEBUG_SLAB */ #endif /* __KERNEL__ */ - #endif /* _LINUX_SLAB_H */ + diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h new file mode 100644 index 00000000000..4b463e66dde --- /dev/null +++ b/include/linux/slab_def.h @@ -0,0 +1,100 @@ +#ifndef _LINUX_SLAB_DEF_H +#define _LINUX_SLAB_DEF_H + +/* + * Definitions unique to the original Linux SLAB allocator. + * + * What we provide here is a way to optimize the frequent kmalloc + * calls in the kernel by selecting the appropriate general cache + * if kmalloc was called with a size that can be established at + * compile time. + */ + +#include <linux/init.h> +#include <asm/page.h> /* kmalloc_sizes.h needs PAGE_SIZE */ +#include <asm/cache.h> /* kmalloc_sizes.h needs L1_CACHE_BYTES */ +#include <linux/compiler.h> + +/* Size description struct for general caches. */ +struct cache_sizes { + size_t cs_size; + struct kmem_cache *cs_cachep; + struct kmem_cache *cs_dmacachep; +}; +extern struct cache_sizes malloc_sizes[]; + +static inline void *kmalloc(size_t size, gfp_t flags) +{ + if (__builtin_constant_p(size)) { + int i = 0; +#define CACHE(x) \ + if (size <= x) \ + goto found; \ + else \ + i++; +#include "kmalloc_sizes.h" +#undef CACHE + { + extern void __you_cannot_kmalloc_that_much(void); + __you_cannot_kmalloc_that_much(); + } +found: + return kmem_cache_alloc((flags & GFP_DMA) ? + malloc_sizes[i].cs_dmacachep : + malloc_sizes[i].cs_cachep, flags); + } + return __kmalloc(size, flags); +} + +static inline void *kzalloc(size_t size, gfp_t flags) +{ + if (__builtin_constant_p(size)) { + int i = 0; +#define CACHE(x) \ + if (size <= x) \ + goto found; \ + else \ + i++; +#include "kmalloc_sizes.h" +#undef CACHE + { + extern void __you_cannot_kzalloc_that_much(void); + __you_cannot_kzalloc_that_much(); + } +found: + return kmem_cache_zalloc((flags & GFP_DMA) ? + malloc_sizes[i].cs_dmacachep : + malloc_sizes[i].cs_cachep, flags); + } + return __kzalloc(size, flags); +} + +#ifdef CONFIG_NUMA +extern void *__kmalloc_node(size_t size, gfp_t flags, int node); + +static inline void *kmalloc_node(size_t size, gfp_t flags, int node) +{ + if (__builtin_constant_p(size)) { + int i = 0; +#define CACHE(x) \ + if (size <= x) \ + goto found; \ + else \ + i++; +#include "kmalloc_sizes.h" +#undef CACHE + { + extern void __you_cannot_kmalloc_that_much(void); + __you_cannot_kmalloc_that_much(); + } +found: + return kmem_cache_alloc_node((flags & GFP_DMA) ? + malloc_sizes[i].cs_dmacachep : + malloc_sizes[i].cs_cachep, flags, node); + } + return __kmalloc_node(size, flags, node); +} + +#endif /* CONFIG_NUMA */ + +#endif /* _LINUX_SLAB_DEF_H */ diff --git a/include/linux/smb_fs_sb.h b/include/linux/smb_fs_sb.h index 5b4ae2cc445..3aa97aa4277 100644 --- a/include/linux/smb_fs_sb.h +++ b/include/linux/smb_fs_sb.h @@ -55,7 +55,7 @@ struct smb_sb_info { * generation is incremented. */ unsigned int generation; - pid_t conn_pid; + struct pid *conn_pid; struct smb_conn_opt opt; wait_queue_head_t conn_wq; int conn_complete; diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h index 94316a98e0d..81480e61346 100644 --- a/include/linux/sysctl.h +++ b/include/linux/sysctl.h @@ -11,7 +11,7 @@ ** the sysctl() binary interface. Do *NOT* change the ** numbering of any existing values here, and do not change ** any numbers within any one set of values. If you have to - ** have to redefine an existing interface, use a new number for it. + ** redefine an existing interface, use a new number for it. ** The kernel will then return -ENOTDIR to any application using ** the old binary interface. ** @@ -918,8 +918,7 @@ typedef struct ctl_table ctl_table; typedef int ctl_handler (ctl_table *table, int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp, - void __user *newval, size_t newlen, - void **context); + void __user *newval, size_t newlen); typedef int proc_handler (ctl_table *ctl, int write, struct file * filp, void __user *buffer, size_t *lenp, loff_t *ppos); @@ -950,7 +949,7 @@ extern int do_sysctl (int __user *name, int nlen, extern int do_sysctl_strategy (ctl_table *table, int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp, - void __user *newval, size_t newlen, void ** context); + void __user *newval, size_t newlen); extern ctl_handler sysctl_string; extern ctl_handler sysctl_intvec; diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h index 9df8833670c..98a1d8cfb73 100644 --- a/include/linux/sysrq.h +++ b/include/linux/sysrq.h @@ -37,23 +37,37 @@ struct sysrq_key_op { #ifdef CONFIG_MAGIC_SYSRQ +extern int sysrq_on(void); + +/* + * Do not use this one directly: + */ +extern int __sysrq_enabled; + /* Generic SysRq interface -- you may call it from any device driver, supplying * ASCII code of the key, pointer to registers and kbd/tty structs (if they * are available -- else NULL's). */ -void handle_sysrq(int, struct tty_struct *); -void __handle_sysrq(int, struct tty_struct *, int check_mask); -int register_sysrq_key(int, struct sysrq_key_op *); -int unregister_sysrq_key(int, struct sysrq_key_op *); +void handle_sysrq(int key, struct tty_struct *tty); +void __handle_sysrq(int key, struct tty_struct *tty, int check_mask); +int register_sysrq_key(int key, struct sysrq_key_op *op); +int unregister_sysrq_key(int key, struct sysrq_key_op *op); struct sysrq_key_op *__sysrq_get_key_op(int key); #else +static inline int sysrq_on(void) +{ + return 0; +} static inline int __reterr(void) { return -EINVAL; } +static inline void handle_sysrq(int key, struct tty_struct *tty) +{ +} #define register_sysrq_key(ig,nore) __reterr() #define unregister_sysrq_key(ig,nore) __reterr() diff --git a/include/linux/task_io_accounting.h b/include/linux/task_io_accounting.h new file mode 100644 index 00000000000..44d00e9ccee --- /dev/null +++ b/include/linux/task_io_accounting.h @@ -0,0 +1,37 @@ +/* + * task_io_accounting: a structure which is used for recording a single task's + * IO statistics. + * + * Don't include this header file directly - it is designed to be dragged in via + * sched.h. + * + * Blame akpm@osdl.org for all this. + */ + +#ifdef CONFIG_TASK_IO_ACCOUNTING +struct task_io_accounting { + /* + * The number of bytes which this task has caused to be read from + * storage. + */ + u64 read_bytes; + + /* + * The number of bytes which this task has caused, or shall cause to be + * written to disk. + */ + u64 write_bytes; + + /* + * A task can cause "negative" IO too. If this task truncates some + * dirty pagecache, some IO which another task has been accounted for + * (in its write_bytes) will not be happening. We _could_ just + * subtract that from the truncating task's write_bytes, but there is + * information loss in doing that. + */ + u64 cancelled_write_bytes; +}; +#else +struct task_io_accounting { +}; +#endif diff --git a/include/linux/task_io_accounting_ops.h b/include/linux/task_io_accounting_ops.h new file mode 100644 index 00000000000..df2a319106b --- /dev/null +++ b/include/linux/task_io_accounting_ops.h @@ -0,0 +1,47 @@ +/* + * Task I/O accounting operations + */ +#ifndef __TASK_IO_ACCOUNTING_OPS_INCLUDED +#define __TASK_IO_ACCOUNTING_OPS_INCLUDED + +#ifdef CONFIG_TASK_IO_ACCOUNTING +static inline void task_io_account_read(size_t bytes) +{ + current->ioac.read_bytes += bytes; +} + +static inline void task_io_account_write(size_t bytes) +{ + current->ioac.write_bytes += bytes; +} + +static inline void task_io_account_cancelled_write(size_t bytes) +{ + current->ioac.cancelled_write_bytes += bytes; +} + +static inline void task_io_accounting_init(struct task_struct *tsk) +{ + memset(&tsk->ioac, 0, sizeof(tsk->ioac)); +} + +#else + +static inline void task_io_account_read(size_t bytes) +{ +} + +static inline void task_io_account_write(size_t bytes) +{ +} + +static inline void task_io_account_cancelled_write(size_t bytes) +{ +} + +static inline void task_io_accounting_init(struct task_struct *tsk) +{ +} + +#endif /* CONFIG_TASK_IO_ACCOUNTING */ +#endif /* __TASK_IO_ACCOUNTING_OPS_INCLUDED */ diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h index 45248806ae9..3fced479825 100644 --- a/include/linux/taskstats.h +++ b/include/linux/taskstats.h @@ -31,7 +31,7 @@ */ -#define TASKSTATS_VERSION 2 +#define TASKSTATS_VERSION 3 #define TS_COMM_LEN 32 /* should be >= TASK_COMM_LEN * in linux/sched.h */ @@ -115,31 +115,37 @@ struct taskstats { __u64 ac_majflt; /* Major Page Fault Count */ /* Basic Accounting Fields end */ - /* Extended accounting fields start */ + /* Extended accounting fields start */ /* Accumulated RSS usage in duration of a task, in MBytes-usecs. * The current rss usage is added to this counter every time * a tick is charged to a task's system time. So, at the end we * will have memory usage multiplied by system time. Thus an * average usage per system time unit can be calculated. */ - __u64 coremem; /* accumulated RSS usage in MB-usec */ + __u64 coremem; /* accumulated RSS usage in MB-usec */ /* Accumulated virtual memory usage in duration of a task. * Same as acct_rss_mem1 above except that we keep track of VM usage. */ - __u64 virtmem; /* accumulated VM usage in MB-usec */ + __u64 virtmem; /* accumulated VM usage in MB-usec */ /* High watermark of RSS and virtual memory usage in duration of * a task, in KBytes. */ - __u64 hiwater_rss; /* High-watermark of RSS usage, in KB */ - __u64 hiwater_vm; /* High-water VM usage, in KB */ + __u64 hiwater_rss; /* High-watermark of RSS usage, in KB */ + __u64 hiwater_vm; /* High-water VM usage, in KB */ /* The following four fields are I/O statistics of a task. */ - __u64 read_char; /* bytes read */ - __u64 write_char; /* bytes written */ - __u64 read_syscalls; /* read syscalls */ - __u64 write_syscalls; /* write syscalls */ - /* Extended accounting fields end */ + __u64 read_char; /* bytes read */ + __u64 write_char; /* bytes written */ + __u64 read_syscalls; /* read syscalls */ + __u64 write_syscalls; /* write syscalls */ + /* Extended accounting fields end */ + +#define TASKSTATS_HAS_IO_ACCOUNTING + /* Per-task storage I/O accounting starts */ + __u64 read_bytes; /* bytes of read I/O */ + __u64 write_bytes; /* bytes of write I/O */ + __u64 cancelled_write_bytes; /* bytes of cancelled write I/O */ }; diff --git a/include/linux/tfrc.h b/include/linux/tfrc.h index 31a9b25276f..8a8462b4a4d 100644 --- a/include/linux/tfrc.h +++ b/include/linux/tfrc.h @@ -37,10 +37,14 @@ struct tfrc_rx_info { * @tfrctx_p: current loss event rate (5.4) * @tfrctx_rto: estimate of RTO, equals 4*RTT (4.3) * @tfrctx_ipi: inter-packet interval (4.6) + * + * Note: X and X_recv are both maintained in units of 64 * bytes/second. This + * enables a finer resolution of sending rates and avoids problems with + * integer arithmetic; u32 is not sufficient as scaling consumes 6 bits. */ struct tfrc_tx_info { - __u32 tfrctx_x; - __u32 tfrctx_x_recv; + __u64 tfrctx_x; + __u64 tfrctx_x_recv; __u32 tfrctx_x_calc; __u32 tfrctx_rtt; __u32 tfrctx_p; diff --git a/include/linux/timer.h b/include/linux/timer.h index c982304dbaf..eeef6643d4c 100644 --- a/include/linux/timer.h +++ b/include/linux/timer.h @@ -98,4 +98,10 @@ extern void run_local_timers(void); struct hrtimer; extern int it_real_fn(struct hrtimer *); +unsigned long __round_jiffies(unsigned long j, int cpu); +unsigned long __round_jiffies_relative(unsigned long j, int cpu); +unsigned long round_jiffies(unsigned long j); +unsigned long round_jiffies_relative(unsigned long j); + + #endif diff --git a/include/linux/topology.h b/include/linux/topology.h index da508d1998e..6c5a6e6e813 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -93,7 +93,7 @@ .groups = NULL, \ .min_interval = 1, \ .max_interval = 2, \ - .busy_factor = 8, \ + .busy_factor = 64, \ .imbalance_pct = 110, \ .cache_nice_tries = 0, \ .per_cpu_gain = 25, \ @@ -194,7 +194,8 @@ .wake_idx = 0, /* unused */ \ .forkexec_idx = 0, /* unused */ \ .per_cpu_gain = 100, \ - .flags = SD_LOAD_BALANCE, \ + .flags = SD_LOAD_BALANCE \ + | SD_SERIALIZE, \ .last_balance = jiffies, \ .balance_interval = 64, \ .nr_balance_failed = 0, \ diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index df5c4654360..5cb380a559f 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -244,6 +244,7 @@ struct v4l2_pix_format #define V4L2_PIX_FMT_YYUV v4l2_fourcc('Y','Y','U','V') /* 16 YUV 4:2:2 */ #define V4L2_PIX_FMT_HI240 v4l2_fourcc('H','I','2','4') /* 8 8-bit color */ #define V4L2_PIX_FMT_HM12 v4l2_fourcc('H','M','1','2') /* 8 YUV 4:2:0 16x16 macroblocks */ +#define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R','4','4','4') /* 16 xxxxrrrr ggggbbbb */ /* see http://www.siliconimaging.com/RGB%20Bayer.htm */ #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B','A','8','1') /* 8 BGBG.. GRGR.. */ diff --git a/include/media/ir-common.h b/include/media/ir-common.h index 8f58406533c..2b25f5c9500 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -92,6 +92,7 @@ extern IR_KEYTAB_TYPE ir_codes_hauppauge_new[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_npgtech[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_norwood[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_proteus_2309[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_budget_ci_old[IR_KEYTAB_SIZE]; #endif diff --git a/include/media/saa7146.h b/include/media/saa7146.h index fee579f10b3..796bcf151a3 100644 --- a/include/media/saa7146.h +++ b/include/media/saa7146.h @@ -42,10 +42,6 @@ extern unsigned int saa7146_debug; #define DEB_INT(x) if (0!=(DEBUG_VARIABLE&0x20)) { DEBUG_PROLOG; printk x; } /* interrupt debug messages */ #define DEB_CAP(x) if (0!=(DEBUG_VARIABLE&0x40)) { DEBUG_PROLOG; printk x; } /* capture debug messages */ -#define SAA7146_IER_DISABLE(x,y) \ - saa7146_write(x, IER, saa7146_read(x, IER) & ~(y)); -#define SAA7146_IER_ENABLE(x,y) \ - saa7146_write(x, IER, saa7146_read(x, IER) | (y)); #define SAA7146_ISR_CLEAR(x,y) \ saa7146_write(x, ISR, (y)); @@ -441,4 +437,20 @@ int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop); #define SAA7146_I2C_BUS_BIT_RATE_80 (0x200) #define SAA7146_I2C_BUS_BIT_RATE_60 (0x300) +static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y) +{ + unsigned long flags; + spin_lock_irqsave(&x->int_slock, flags); + saa7146_write(x, IER, saa7146_read(x, IER) & ~y); + spin_unlock_irqrestore(&x->int_slock, flags); +} + +static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y) +{ + unsigned long flags; + spin_lock_irqsave(&x->int_slock, flags); + saa7146_write(x, IER, saa7146_read(x, IER) | y); + spin_unlock_irqrestore(&x->int_slock, flags); +} + #endif diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h index 37dad07a843..e5ad3fcfe98 100644 --- a/include/media/tuner-types.h +++ b/include/media/tuner-types.h @@ -50,6 +50,10 @@ struct tuner_params { sensitivity. If this setting is 1, then set PORT2 to 1 to get proper FM reception. */ unsigned int port2_fm_high_sensitivity:1; + /* Some Philips tuners use tda9887 cGainNormal to select the FM radio + sensitivity. If this setting is 1, e register will use cGainNormal + instead of cGainLow. */ + unsigned int fm_gain_normal:1; /* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners use Intercarrier mode. If this setting is 1, then the tuner needs to be set to intercarrier mode. */ diff --git a/include/media/tuner.h b/include/media/tuner.h index 3116e750132..99acf847365 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -145,6 +145,7 @@ extern int tuner_debug; #define TDA9887_DEEMPHASIS_75 (3<<16) #define TDA9887_AUTOMUTE (1<<18) #define TDA9887_GATING_18 (1<<19) +#define TDA9887_GAIN_NORMAL (1<<20) #ifdef __KERNEL__ diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h index e9fc1a78549..5660ea24996 100644 --- a/include/media/tveeprom.h +++ b/include/media/tveeprom.h @@ -3,7 +3,7 @@ struct tveeprom { u32 has_radio; - u32 has_ir; /* 0: no IR, 1: IR present, 2: unknown */ + u32 has_ir; /* bit 0: IR receiver present, bit 1: IR transmitter (blaster) present. -1 == unknown */ u32 has_MAC_address; /* 0: no MAC, 1: MAC present, 2: unknown */ u32 tuner_type; diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h index aecc946980a..91b19921f95 100644 --- a/include/media/v4l2-common.h +++ b/include/media/v4l2-common.h @@ -144,6 +144,9 @@ enum v4l2_chip_ident { V4L2_IDENT_CX25841 = 241, V4L2_IDENT_CX25842 = 242, V4L2_IDENT_CX25843 = 243, + + /* OmniVision sensors - range 250-299 */ + V4L2_IDENT_OV7670 = 250, }; /* audio ioctls */ @@ -251,4 +254,8 @@ struct v4l2_crystal_freq { If the frequency is not supported, then -EINVAL is returned. */ #define VIDIOC_INT_S_CRYSTAL_FREQ _IOW ('d', 113, struct v4l2_crystal_freq) +/* Initialize the sensor registors to some sort of reasonable + default values. */ +#define VIDIOC_INT_INIT _IOW ('d', 114, u32) + #endif /* V4L2_COMMON_H_ */ diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 6a11d772700..fb96472a1bd 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -43,6 +43,7 @@ /* Video standard functions */ extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs); +extern char *v4l2_norm_to_name(v4l2_std_id id); extern int v4l2_video_std_construct(struct v4l2_standard *vs, int id, char *name); @@ -81,12 +82,6 @@ extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd, * This version moves redundant code from video device code to * the common handler */ -struct v4l2_tvnorm { - char *name; - v4l2_std_id id; - - void *priv_data; -}; struct video_device { @@ -104,9 +99,8 @@ struct video_device int debug; /* Activates debug level*/ /* Video standard vars */ - int tvnormsize; /* Size of tvnorm array */ - v4l2_std_id current_norm; /* Current tvnorm */ - struct v4l2_tvnorm *tvnorms; + v4l2_std_id tvnorms; /* Supported tv norms */ + v4l2_std_id current_norm; /* Current tvnorm */ /* callbacks */ void (*release)(struct video_device *vfd); @@ -211,7 +205,7 @@ struct video_device /* Standard handling G_STD and ENUMSTD are handled by videodev.c */ - int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id a); + int (*vidioc_s_std) (struct file *file, void *fh, v4l2_std_id *norm); int (*vidioc_querystd) (struct file *file, void *fh, v4l2_std_id *a); /* Input handling */ diff --git a/include/net/ax25.h b/include/net/ax25.h index e1d116f1192..14b72d868f0 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -285,6 +285,8 @@ extern struct sock *ax25_make_new(struct sock *, struct ax25_dev *); extern const ax25_address ax25_bcast; extern const ax25_address ax25_defaddr; extern const ax25_address null_ax25_address; +extern char *ax2asc(char *buf, const ax25_address *); +extern void asc2ax(ax25_address *addr, const char *callsign); extern int ax25cmp(const ax25_address *, const ax25_address *); extern int ax25digicmp(const ax25_digi *, const ax25_digi *); extern const unsigned char *ax25_addr_parse(const unsigned char *, int, diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 10a3eec191f..41456c14884 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -739,13 +739,13 @@ struct sockaddr_hci { struct hci_filter { unsigned long type_mask; unsigned long event_mask[2]; - __u16 opcode; + __le16 opcode; }; struct hci_ufilter { __u32 type_mask; __u32 event_mask[2]; - __u16 opcode; + __le16 opcode; }; #define HCI_FLT_TYPE_BITS 31 diff --git a/include/net/ip.h b/include/net/ip.h index 83cb9ac5554..053f02b5cb8 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -376,8 +376,7 @@ int ipv4_doint_and_flush(ctl_table *ctl, int write, size_t *lenp, loff_t *ppos); int ipv4_doint_and_flush_strategy(ctl_table *table, int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp, - void __user *newval, size_t newlen, - void **context); + void __user *newval, size_t newlen); #ifdef CONFIG_PROC_FS extern int ip_misc_proc_init(void); #endif diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index 215461f18db..c818f87122a 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -368,7 +368,7 @@ static inline void sctp_sysctl_register(void) { return; } static inline void sctp_sysctl_unregister(void) { return; } static inline int sctp_sysctl_jiffies_ms(ctl_table *table, int __user *name, int nlen, void __user *oldval, size_t __user *oldlenp, - void __user *newval, size_t newlen, void **context) { + void __user *newval, size_t newlen) { return -ENOSYS; } #endif diff --git a/include/rdma/ib_marshall.h b/include/rdma/ib_marshall.h index 66bf4d7d0df..db037205c9e 100644 --- a/include/rdma/ib_marshall.h +++ b/include/rdma/ib_marshall.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2005 Intel Corporation. All rights reserved. + * Copyright (c) 2005-2006 Intel Corporation. All rights reserved. * * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU @@ -41,6 +41,9 @@ void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst, struct ib_qp_attr *src); +void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst, + struct ib_ah_attr *src); + void ib_copy_path_rec_to_user(struct ib_user_path_rec *dst, struct ib_sa_path_rec *src); diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 8eacc351099..fd2353fa7e1 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -43,6 +43,8 @@ #include <linux/types.h> #include <linux/device.h> +#include <linux/mm.h> +#include <linux/dma-mapping.h> #include <asm/atomic.h> #include <asm/scatterlist.h> @@ -848,6 +850,49 @@ struct ib_cache { u8 *lmc_cache; }; +struct ib_dma_mapping_ops { + int (*mapping_error)(struct ib_device *dev, + u64 dma_addr); + u64 (*map_single)(struct ib_device *dev, + void *ptr, size_t size, + enum dma_data_direction direction); + void (*unmap_single)(struct ib_device *dev, + u64 addr, size_t size, + enum dma_data_direction direction); + u64 (*map_page)(struct ib_device *dev, + struct page *page, unsigned long offset, + size_t size, + enum dma_data_direction direction); + void (*unmap_page)(struct ib_device *dev, + u64 addr, size_t size, + enum dma_data_direction direction); + int (*map_sg)(struct ib_device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction direction); + void (*unmap_sg)(struct ib_device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction direction); + u64 (*dma_address)(struct ib_device *dev, + struct scatterlist *sg); + unsigned int (*dma_len)(struct ib_device *dev, + struct scatterlist *sg); + void (*sync_single_for_cpu)(struct ib_device *dev, + u64 dma_handle, + size_t size, + enum dma_data_direction dir); + void (*sync_single_for_device)(struct ib_device *dev, + u64 dma_handle, + size_t size, + enum dma_data_direction dir); + void *(*alloc_coherent)(struct ib_device *dev, + size_t size, + u64 *dma_handle, + gfp_t flag); + void (*free_coherent)(struct ib_device *dev, + size_t size, void *cpu_addr, + u64 dma_handle); +}; + struct iw_cm_verbs; struct ib_device { @@ -992,6 +1037,8 @@ struct ib_device { struct ib_mad *in_mad, struct ib_mad *out_mad); + struct ib_dma_mapping_ops *dma_ops; + struct module *owner; struct class_device class_dev; struct kobject ports_parent; @@ -1395,10 +1442,216 @@ static inline int ib_req_ncomp_notif(struct ib_cq *cq, int wc_cnt) * usable for DMA. * @pd: The protection domain associated with the memory region. * @mr_access_flags: Specifies the memory access rights. + * + * Note that the ib_dma_*() functions defined below must be used + * to create/destroy addresses used with the Lkey or Rkey returned + * by ib_get_dma_mr(). */ struct ib_mr *ib_get_dma_mr(struct ib_pd *pd, int mr_access_flags); /** + * ib_dma_mapping_error - check a DMA addr for error + * @dev: The device for which the dma_addr was created + * @dma_addr: The DMA address to check + */ +static inline int ib_dma_mapping_error(struct ib_device *dev, u64 dma_addr) +{ + return dev->dma_ops ? + dev->dma_ops->mapping_error(dev, dma_addr) : + dma_mapping_error(dma_addr); +} + +/** + * ib_dma_map_single - Map a kernel virtual address to DMA address + * @dev: The device for which the dma_addr is to be created + * @cpu_addr: The kernel virtual address + * @size: The size of the region in bytes + * @direction: The direction of the DMA + */ +static inline u64 ib_dma_map_single(struct ib_device *dev, + void *cpu_addr, size_t size, + enum dma_data_direction direction) +{ + return dev->dma_ops ? + dev->dma_ops->map_single(dev, cpu_addr, size, direction) : + dma_map_single(dev->dma_device, cpu_addr, size, direction); +} + +/** + * ib_dma_unmap_single - Destroy a mapping created by ib_dma_map_single() + * @dev: The device for which the DMA address was created + * @addr: The DMA address + * @size: The size of the region in bytes + * @direction: The direction of the DMA + */ +static inline void ib_dma_unmap_single(struct ib_device *dev, + u64 addr, size_t size, + enum dma_data_direction direction) +{ + dev->dma_ops ? + dev->dma_ops->unmap_single(dev, addr, size, direction) : + dma_unmap_single(dev->dma_device, addr, size, direction); +} + +/** + * ib_dma_map_page - Map a physical page to DMA address + * @dev: The device for which the dma_addr is to be created + * @page: The page to be mapped + * @offset: The offset within the page + * @size: The size of the region in bytes + * @direction: The direction of the DMA + */ +static inline u64 ib_dma_map_page(struct ib_device *dev, + struct page *page, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + return dev->dma_ops ? + dev->dma_ops->map_page(dev, page, offset, size, direction) : + dma_map_page(dev->dma_device, page, offset, size, direction); +} + +/** + * ib_dma_unmap_page - Destroy a mapping created by ib_dma_map_page() + * @dev: The device for which the DMA address was created + * @addr: The DMA address + * @size: The size of the region in bytes + * @direction: The direction of the DMA + */ +static inline void ib_dma_unmap_page(struct ib_device *dev, + u64 addr, size_t size, + enum dma_data_direction direction) +{ + dev->dma_ops ? + dev->dma_ops->unmap_page(dev, addr, size, direction) : + dma_unmap_page(dev->dma_device, addr, size, direction); +} + +/** + * ib_dma_map_sg - Map a scatter/gather list to DMA addresses + * @dev: The device for which the DMA addresses are to be created + * @sg: The array of scatter/gather entries + * @nents: The number of scatter/gather entries + * @direction: The direction of the DMA + */ +static inline int ib_dma_map_sg(struct ib_device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + return dev->dma_ops ? + dev->dma_ops->map_sg(dev, sg, nents, direction) : + dma_map_sg(dev->dma_device, sg, nents, direction); +} + +/** + * ib_dma_unmap_sg - Unmap a scatter/gather list of DMA addresses + * @dev: The device for which the DMA addresses were created + * @sg: The array of scatter/gather entries + * @nents: The number of scatter/gather entries + * @direction: The direction of the DMA + */ +static inline void ib_dma_unmap_sg(struct ib_device *dev, + struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + dev->dma_ops ? + dev->dma_ops->unmap_sg(dev, sg, nents, direction) : + dma_unmap_sg(dev->dma_device, sg, nents, direction); +} + +/** + * ib_sg_dma_address - Return the DMA address from a scatter/gather entry + * @dev: The device for which the DMA addresses were created + * @sg: The scatter/gather entry + */ +static inline u64 ib_sg_dma_address(struct ib_device *dev, + struct scatterlist *sg) +{ + return dev->dma_ops ? + dev->dma_ops->dma_address(dev, sg) : sg_dma_address(sg); +} + +/** + * ib_sg_dma_len - Return the DMA length from a scatter/gather entry + * @dev: The device for which the DMA addresses were created + * @sg: The scatter/gather entry + */ +static inline unsigned int ib_sg_dma_len(struct ib_device *dev, + struct scatterlist *sg) +{ + return dev->dma_ops ? + dev->dma_ops->dma_len(dev, sg) : sg_dma_len(sg); +} + +/** + * ib_dma_sync_single_for_cpu - Prepare DMA region to be accessed by CPU + * @dev: The device for which the DMA address was created + * @addr: The DMA address + * @size: The size of the region in bytes + * @dir: The direction of the DMA + */ +static inline void ib_dma_sync_single_for_cpu(struct ib_device *dev, + u64 addr, + size_t size, + enum dma_data_direction dir) +{ + dev->dma_ops ? + dev->dma_ops->sync_single_for_cpu(dev, addr, size, dir) : + dma_sync_single_for_cpu(dev->dma_device, addr, size, dir); +} + +/** + * ib_dma_sync_single_for_device - Prepare DMA region to be accessed by device + * @dev: The device for which the DMA address was created + * @addr: The DMA address + * @size: The size of the region in bytes + * @dir: The direction of the DMA + */ +static inline void ib_dma_sync_single_for_device(struct ib_device *dev, + u64 addr, + size_t size, + enum dma_data_direction dir) +{ + dev->dma_ops ? + dev->dma_ops->sync_single_for_device(dev, addr, size, dir) : + dma_sync_single_for_device(dev->dma_device, addr, size, dir); +} + +/** + * ib_dma_alloc_coherent - Allocate memory and map it for DMA + * @dev: The device for which the DMA address is requested + * @size: The size of the region to allocate in bytes + * @dma_handle: A pointer for returning the DMA address of the region + * @flag: memory allocator flags + */ +static inline void *ib_dma_alloc_coherent(struct ib_device *dev, + size_t size, + u64 *dma_handle, + gfp_t flag) +{ + return dev->dma_ops ? + dev->dma_ops->alloc_coherent(dev, size, dma_handle, flag) : + dma_alloc_coherent(dev->dma_device, size, dma_handle, flag); +} + +/** + * ib_dma_free_coherent - Free memory allocated by ib_dma_alloc_coherent() + * @dev: The device for which the DMA addresses were allocated + * @size: The size of the region + * @cpu_addr: the address returned by ib_dma_alloc_coherent() + * @dma_handle: the DMA address returned by ib_dma_alloc_coherent() + */ +static inline void ib_dma_free_coherent(struct ib_device *dev, + size_t size, void *cpu_addr, + u64 dma_handle) +{ + dev->dma_ops ? + dev->dma_ops->free_coherent(dev, size, cpu_addr, dma_handle) : + dma_free_coherent(dev->dma_device, size, cpu_addr, dma_handle); +} + +/** * ib_reg_phys_mr - Prepares a virtually addressed memory region for use * by an HCA. * @pd: The protection domain associated assigned to the registered region. diff --git a/include/rdma/rdma_cm.h b/include/rdma/rdma_cm.h index deb5a0a4cee..36cd8a8526a 100644 --- a/include/rdma/rdma_cm.h +++ b/include/rdma/rdma_cm.h @@ -77,11 +77,34 @@ struct rdma_route { int num_paths; }; +struct rdma_conn_param { + const void *private_data; + u8 private_data_len; + u8 responder_resources; + u8 initiator_depth; + u8 flow_control; + u8 retry_count; /* ignored when accepting */ + u8 rnr_retry_count; + /* Fields below ignored if a QP is created on the rdma_cm_id. */ + u8 srq; + u32 qp_num; +}; + +struct rdma_ud_param { + const void *private_data; + u8 private_data_len; + struct ib_ah_attr ah_attr; + u32 qp_num; + u32 qkey; +}; + struct rdma_cm_event { enum rdma_cm_event_type event; int status; - void *private_data; - u8 private_data_len; + union { + struct rdma_conn_param conn; + struct rdma_ud_param ud; + } param; }; struct rdma_cm_id; @@ -204,25 +227,17 @@ void rdma_destroy_qp(struct rdma_cm_id *id); int rdma_init_qp_attr(struct rdma_cm_id *id, struct ib_qp_attr *qp_attr, int *qp_attr_mask); -struct rdma_conn_param { - const void *private_data; - u8 private_data_len; - u8 responder_resources; - u8 initiator_depth; - u8 flow_control; - u8 retry_count; /* ignored when accepting */ - u8 rnr_retry_count; - /* Fields below ignored if a QP is created on the rdma_cm_id. */ - u8 srq; - u32 qp_num; - enum ib_qp_type qp_type; -}; - /** * rdma_connect - Initiate an active connection request. + * @id: Connection identifier to connect. + * @conn_param: Connection information used for connected QPs. * * Users must have resolved a route for the rdma_cm_id to connect with * by having called rdma_resolve_route before calling this routine. + * + * This call will either connect to a remote QP or obtain remote QP + * information for unconnected rdma_cm_id's. The actual operation is + * based on the rdma_cm_id's port space. */ int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); @@ -253,6 +268,21 @@ int rdma_listen(struct rdma_cm_id *id, int backlog); int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param); /** + * rdma_notify - Notifies the RDMA CM of an asynchronous event that has + * occurred on the connection. + * @id: Connection identifier to transition to established. + * @event: Asynchronous event. + * + * This routine should be invoked by users to notify the CM of relevant + * communication events. Events that should be reported to the CM and + * when to report them are: + * + * IB_EVENT_COMM_EST - Used when a message is received on a connected + * QP before an RTU has been received. + */ +int rdma_notify(struct rdma_cm_id *id, enum ib_event_type event); + +/** * rdma_reject - Called to reject a connection request or response. */ int rdma_reject(struct rdma_cm_id *id, const void *private_data, diff --git a/include/rdma/rdma_cm_ib.h b/include/rdma/rdma_cm_ib.h index e8c3af1804d..9b176df1d66 100644 --- a/include/rdma/rdma_cm_ib.h +++ b/include/rdma/rdma_cm_ib.h @@ -44,4 +44,7 @@ int rdma_set_ib_paths(struct rdma_cm_id *id, struct ib_sa_path_rec *path_rec, int num_paths); +/* Global qkey for UD QPs and multicast groups. */ +#define RDMA_UD_QKEY 0x01234567 + #endif /* RDMA_CM_IB_H */ diff --git a/include/rdma/rdma_user_cm.h b/include/rdma/rdma_user_cm.h new file mode 100644 index 00000000000..9572ab8eeac --- /dev/null +++ b/include/rdma/rdma_user_cm.h @@ -0,0 +1,206 @@ +/* + * Copyright (c) 2005-2006 Intel Corporation. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef RDMA_USER_CM_H +#define RDMA_USER_CM_H + +#include <linux/types.h> +#include <linux/in6.h> +#include <rdma/ib_user_verbs.h> +#include <rdma/ib_user_sa.h> + +#define RDMA_USER_CM_ABI_VERSION 3 + +#define RDMA_MAX_PRIVATE_DATA 256 + +enum { + RDMA_USER_CM_CMD_CREATE_ID, + RDMA_USER_CM_CMD_DESTROY_ID, + RDMA_USER_CM_CMD_BIND_ADDR, + RDMA_USER_CM_CMD_RESOLVE_ADDR, + RDMA_USER_CM_CMD_RESOLVE_ROUTE, + RDMA_USER_CM_CMD_QUERY_ROUTE, + RDMA_USER_CM_CMD_CONNECT, + RDMA_USER_CM_CMD_LISTEN, + RDMA_USER_CM_CMD_ACCEPT, + RDMA_USER_CM_CMD_REJECT, + RDMA_USER_CM_CMD_DISCONNECT, + RDMA_USER_CM_CMD_INIT_QP_ATTR, + RDMA_USER_CM_CMD_GET_EVENT, + RDMA_USER_CM_CMD_GET_OPTION, + RDMA_USER_CM_CMD_SET_OPTION, + RDMA_USER_CM_CMD_NOTIFY +}; + +/* + * command ABI structures. + */ +struct rdma_ucm_cmd_hdr { + __u32 cmd; + __u16 in; + __u16 out; +}; + +struct rdma_ucm_create_id { + __u64 uid; + __u64 response; + __u16 ps; + __u8 reserved[6]; +}; + +struct rdma_ucm_create_id_resp { + __u32 id; +}; + +struct rdma_ucm_destroy_id { + __u64 response; + __u32 id; + __u32 reserved; +}; + +struct rdma_ucm_destroy_id_resp { + __u32 events_reported; +}; + +struct rdma_ucm_bind_addr { + __u64 response; + struct sockaddr_in6 addr; + __u32 id; +}; + +struct rdma_ucm_resolve_addr { + struct sockaddr_in6 src_addr; + struct sockaddr_in6 dst_addr; + __u32 id; + __u32 timeout_ms; +}; + +struct rdma_ucm_resolve_route { + __u32 id; + __u32 timeout_ms; +}; + +struct rdma_ucm_query_route { + __u64 response; + __u32 id; + __u32 reserved; +}; + +struct rdma_ucm_query_route_resp { + __u64 node_guid; + struct ib_user_path_rec ib_route[2]; + struct sockaddr_in6 src_addr; + struct sockaddr_in6 dst_addr; + __u32 num_paths; + __u8 port_num; + __u8 reserved[3]; +}; + +struct rdma_ucm_conn_param { + __u32 qp_num; + __u32 reserved; + __u8 private_data[RDMA_MAX_PRIVATE_DATA]; + __u8 private_data_len; + __u8 srq; + __u8 responder_resources; + __u8 initiator_depth; + __u8 flow_control; + __u8 retry_count; + __u8 rnr_retry_count; + __u8 valid; +}; + +struct rdma_ucm_ud_param { + __u32 qp_num; + __u32 qkey; + struct ib_uverbs_ah_attr ah_attr; + __u8 private_data[RDMA_MAX_PRIVATE_DATA]; + __u8 private_data_len; + __u8 reserved[7]; +}; + +struct rdma_ucm_connect { + struct rdma_ucm_conn_param conn_param; + __u32 id; + __u32 reserved; +}; + +struct rdma_ucm_listen { + __u32 id; + __u32 backlog; +}; + +struct rdma_ucm_accept { + __u64 uid; + struct rdma_ucm_conn_param conn_param; + __u32 id; + __u32 reserved; +}; + +struct rdma_ucm_reject { + __u32 id; + __u8 private_data_len; + __u8 reserved[3]; + __u8 private_data[RDMA_MAX_PRIVATE_DATA]; +}; + +struct rdma_ucm_disconnect { + __u32 id; +}; + +struct rdma_ucm_init_qp_attr { + __u64 response; + __u32 id; + __u32 qp_state; +}; + +struct rdma_ucm_notify { + __u32 id; + __u32 event; +}; + +struct rdma_ucm_get_event { + __u64 response; +}; + +struct rdma_ucm_event_resp { + __u64 uid; + __u32 id; + __u32 event; + __u32 status; + union { + struct rdma_ucm_conn_param conn; + struct rdma_ucm_ud_param ud; + } param; +}; + +#endif /* RDMA_USER_CM_H */ diff --git a/include/video/sstfb.h b/include/video/sstfb.h index 5dbf5e7e50a..baa163f770a 100644 --- a/include/video/sstfb.h +++ b/include/video/sstfb.h @@ -119,7 +119,7 @@ #define BACKPORCH 0x0208 #define VIDEODIMENSIONS 0x020c #define FBIINIT0 0x0210 /* misc+fifo controls */ -# define EN_VGA_PASSTHROUGH BIT(0) +# define DIS_VGA_PASSTHROUGH BIT(0) # define FBI_RESET BIT(1) # define FIFO_RESET BIT(2) #define FBIINIT1 0x0214 /* PCI + video controls */ @@ -251,7 +251,7 @@ # define DACREG_ICS_CLK1_A 0 /* bit4 */ /* sst default init registers */ -#define FBIINIT0_DEFAULT EN_VGA_PASSTHROUGH +#define FBIINIT0_DEFAULT DIS_VGA_PASSTHROUGH #define FBIINIT1_DEFAULT \ ( \ @@ -296,6 +296,11 @@ * */ +/* ioctl to enable/disable VGA passthrough */ +#define SSTFB_SET_VGAPASS _IOW('F', 0xdd, __u32) +#define SSTFB_GET_VGAPASS _IOR('F', 0xdd, __u32) + + /* used to know witch clock to set */ enum { VID_CLOCK=0, @@ -317,7 +322,7 @@ struct pll_timing { }; struct dac_switch { - char * name; + const char *name; int (*detect) (struct fb_info *info); int (*set_pll) (struct fb_info *info, const struct pll_timing *t, const int clock); void (*set_vidmod) (struct fb_info *info, const int bpp); @@ -345,7 +350,7 @@ struct sstfb_par { struct pci_dev *dev; int type; u8 revision; - int gfx_clock; /* status */ + u8 vgapass; /* VGA pass through: 1=enabled, 0=disabled */ }; #endif /* _SSTFB_H_ */ |