diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-arm/arch-at91rm9200/at91rm9200_usart.h | 123 | ||||
| -rw-r--r-- | include/asm-arm/arch-at91rm9200/board.h | 5 | ||||
| -rw-r--r-- | include/asm-arm/arch-at91rm9200/hardware.h | 2 | ||||
| -rw-r--r-- | include/asm-arm/arch-lh7a40x/clocks.h | 2 | ||||
| -rw-r--r-- | include/asm-arm/mach/serial_at91.h | 8 | ||||
| -rw-r--r-- | include/asm-arm/pgtable-nommu.h | 1 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/at91rm9200_usart.h | 123 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/board.h | 10 | ||||
| -rw-r--r-- | include/asm-avr32/arch-at32ap/init.h | 1 | ||||
| -rw-r--r-- | include/asm-avr32/mach/serial_at91.h | 8 | ||||
| -rw-r--r-- | include/asm-i386/alternative-asm.i | 2 | ||||
| -rw-r--r-- | include/asm-i386/frame.i | 1 | ||||
| -rw-r--r-- | include/asm-mips/mach-pnx8550/uart.h | 14 | ||||
| -rw-r--r-- | include/asm-powerpc/irq.h | 1 | ||||
| -rw-r--r-- | include/asm-powerpc/pci-bridge.h | 1 | ||||
| -rw-r--r-- | include/asm-sparc64/compat_signal.h | 1 | ||||
| -rw-r--r-- | include/asm-x86_64/alternative-asm.i | 2 | ||||
| -rw-r--r-- | include/linux/Kbuild | 1 | ||||
| -rw-r--r-- | include/linux/config.h | 1 | ||||
| -rw-r--r-- | include/linux/serial_core.h | 4 | ||||
| -rw-r--r-- | include/net/netdma.h | 1 |
21 files changed, 38 insertions, 274 deletions
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h b/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h deleted file mode 100644 index 79f851e31b9..00000000000 --- a/include/asm-arm/arch-at91rm9200/at91rm9200_usart.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/at91rm9200_usart.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * USART registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_USART_H -#define AT91RM9200_USART_H - -#define AT91_US_CR 0x00 /* Control Register */ -#define AT91_US_RSTRX (1 << 2) /* Reset Receiver */ -#define AT91_US_RSTTX (1 << 3) /* Reset Transmitter */ -#define AT91_US_RXEN (1 << 4) /* Receiver Enable */ -#define AT91_US_RXDIS (1 << 5) /* Receiver Disable */ -#define AT91_US_TXEN (1 << 6) /* Transmitter Enable */ -#define AT91_US_TXDIS (1 << 7) /* Transmitter Disable */ -#define AT91_US_RSTSTA (1 << 8) /* Reset Status Bits */ -#define AT91_US_STTBRK (1 << 9) /* Start Break */ -#define AT91_US_STPBRK (1 << 10) /* Stop Break */ -#define AT91_US_STTTO (1 << 11) /* Start Time-out */ -#define AT91_US_SENDA (1 << 12) /* Send Address */ -#define AT91_US_RSTIT (1 << 13) /* Reset Iterations */ -#define AT91_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ -#define AT91_US_RETTO (1 << 15) /* Rearm Time-out */ -#define AT91_US_DTREN (1 << 16) /* Data Terminal Ready Enable */ -#define AT91_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable */ -#define AT91_US_RTSEN (1 << 18) /* Request To Send Enable */ -#define AT91_US_RTSDIS (1 << 19) /* Request To Send Disable */ - -#define AT91_US_MR 0x04 /* Mode Register */ -#define AT91_US_USMODE (0xf << 0) /* Mode of the USART */ -#define AT91_US_USMODE_NORMAL 0 -#define AT91_US_USMODE_RS485 1 -#define AT91_US_USMODE_HWHS 2 -#define AT91_US_USMODE_MODEM 3 -#define AT91_US_USMODE_ISO7816_T0 4 -#define AT91_US_USMODE_ISO7816_T1 6 -#define AT91_US_USMODE_IRDA 8 -#define AT91_US_USCLKS (3 << 4) /* Clock Selection */ -#define AT91_US_CHRL (3 << 6) /* Character Length */ -#define AT91_US_CHRL_5 (0 << 6) -#define AT91_US_CHRL_6 (1 << 6) -#define AT91_US_CHRL_7 (2 << 6) -#define AT91_US_CHRL_8 (3 << 6) -#define AT91_US_SYNC (1 << 8) /* Synchronous Mode Select */ -#define AT91_US_PAR (7 << 9) /* Parity Type */ -#define AT91_US_PAR_EVEN (0 << 9) -#define AT91_US_PAR_ODD (1 << 9) -#define AT91_US_PAR_SPACE (2 << 9) -#define AT91_US_PAR_MARK (3 << 9) -#define AT91_US_PAR_NONE (4 << 9) -#define AT91_US_PAR_MULTI_DROP (6 << 9) -#define AT91_US_NBSTOP (3 << 12) /* Number of Stop Bits */ -#define AT91_US_NBSTOP_1 (0 << 12) -#define AT91_US_NBSTOP_1_5 (1 << 12) -#define AT91_US_NBSTOP_2 (2 << 12) -#define AT91_US_CHMODE (3 << 14) /* Channel Mode */ -#define AT91_US_CHMODE_NORMAL (0 << 14) -#define AT91_US_CHMODE_ECHO (1 << 14) -#define AT91_US_CHMODE_LOC_LOOP (2 << 14) -#define AT91_US_CHMODE_REM_LOOP (3 << 14) -#define AT91_US_MSBF (1 << 16) /* Bit Order */ -#define AT91_US_MODE9 (1 << 17) /* 9-bit Character Length */ -#define AT91_US_CLKO (1 << 18) /* Clock Output Select */ -#define AT91_US_OVER (1 << 19) /* Oversampling Mode */ -#define AT91_US_INACK (1 << 20) /* Inhibit Non Acknowledge */ -#define AT91_US_DSNACK (1 << 21) /* Disable Successive NACK */ -#define AT91_US_MAX_ITER (7 << 24) /* Max Iterations */ -#define AT91_US_FILTER (1 << 28) /* Infrared Receive Line Filter */ - -#define AT91_US_IER 0x08 /* Interrupt Enable Register */ -#define AT91_US_RXRDY (1 << 0) /* Receiver Ready */ -#define AT91_US_TXRDY (1 << 1) /* Transmitter Ready */ -#define AT91_US_RXBRK (1 << 2) /* Break Received / End of Break */ -#define AT91_US_ENDRX (1 << 3) /* End of Receiver Transfer */ -#define AT91_US_ENDTX (1 << 4) /* End of Transmitter Transfer */ -#define AT91_US_OVRE (1 << 5) /* Overrun Error */ -#define AT91_US_FRAME (1 << 6) /* Framing Error */ -#define AT91_US_PARE (1 << 7) /* Parity Error */ -#define AT91_US_TIMEOUT (1 << 8) /* Receiver Time-out */ -#define AT91_US_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define AT91_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */ -#define AT91_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ -#define AT91_US_RXBUFF (1 << 12) /* Reception Buffer Full */ -#define AT91_US_NACK (1 << 13) /* Non Acknowledge */ -#define AT91_US_RIIC (1 << 16) /* Ring Indicator Input Change */ -#define AT91_US_DSRIC (1 << 17) /* Data Set Ready Input Change */ -#define AT91_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change */ -#define AT91_US_CTSIC (1 << 19) /* Clear to Send Input Change */ -#define AT91_US_RI (1 << 20) /* RI */ -#define AT91_US_DSR (1 << 21) /* DSR */ -#define AT91_US_DCD (1 << 22) /* DCD */ -#define AT91_US_CTS (1 << 23) /* CTS */ - -#define AT91_US_IDR 0x0c /* Interrupt Disable Register */ -#define AT91_US_IMR 0x10 /* Interrupt Mask Register */ -#define AT91_US_CSR 0x14 /* Channel Status Register */ -#define AT91_US_RHR 0x18 /* Receiver Holding Register */ -#define AT91_US_THR 0x1c /* Transmitter Holding Register */ - -#define AT91_US_BRGR 0x20 /* Baud Rate Generator Register */ -#define AT91_US_CD (0xffff << 0) /* Clock Divider */ - -#define AT91_US_RTOR 0x24 /* Receiver Time-out Register */ -#define AT91_US_TO (0xffff << 0) /* Time-out Value */ - -#define AT91_US_TTGR 0x28 /* Transmitter Timeguard Register */ -#define AT91_US_TG (0xff << 0) /* Timeguard Value */ - -#define AT91_US_FIDI 0x40 /* FI DI Ratio Register */ -#define AT91_US_NER 0x44 /* Number of Errors Register */ -#define AT91_US_IF 0x4c /* IrDA Filter Register */ - -#endif diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h index c1ca9a4658e..3cc9aec80f9 100644 --- a/include/asm-arm/arch-at91rm9200/board.h +++ b/include/asm-arm/arch-at91rm9200/board.h @@ -97,12 +97,13 @@ struct at91_uart_config { unsigned short nr_tty; /* number of serial tty's */ short tty_map[]; /* map UART to tty number */ }; -extern struct platform_device *at91_default_console_device; +extern struct platform_device *atmel_default_console_device; extern void __init at91_init_serial(struct at91_uart_config *config); -struct at91_uart_data { +struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virtual base address, if any */ }; extern void __init at91_add_device_serial(void); diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h index 6551b4d1ff7..9ca4cc9c0b2 100644 --- a/include/asm-arm/arch-at91rm9200/hardware.h +++ b/include/asm-arm/arch-at91rm9200/hardware.h @@ -44,7 +44,7 @@ #define AT91_SRAM_VIRT_BASE (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE) /* Serial ports */ -#define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */ +#define ATMEL_MAX_UART 5 /* 4 USART3's and one DBGU port */ /* FLASH */ #define AT91_FLASH_BASE 0x10000000 /* NCS0: Flash physical base address */ diff --git a/include/asm-arm/arch-lh7a40x/clocks.h b/include/asm-arm/arch-lh7a40x/clocks.h index bee02fd8dab..7d0ba18ad57 100644 --- a/include/asm-arm/arch-lh7a40x/clocks.h +++ b/include/asm-arm/arch-lh7a40x/clocks.h @@ -8,8 +8,6 @@ * */ -#include <linux/config.h> - #ifndef __ASM_ARCH_CLOCKS_H #define __ASM_ARCH_CLOCKS_H diff --git a/include/asm-arm/mach/serial_at91.h b/include/asm-arm/mach/serial_at91.h index 1290bb32802..55b317a8906 100644 --- a/include/asm-arm/mach/serial_at91.h +++ b/include/asm-arm/mach/serial_at91.h @@ -14,7 +14,7 @@ struct uart_port; * This is a temporary structure for registering these * functions; it is intended to be discarded after boot. */ -struct at91_port_fns { +struct atmel_port_fns { void (*set_mctrl)(struct uart_port *, u_int); u_int (*get_mctrl)(struct uart_port *); void (*enable_ms)(struct uart_port *); @@ -24,10 +24,10 @@ struct at91_port_fns { void (*close)(struct uart_port *); }; -#if defined(CONFIG_SERIAL_AT91) -void at91_register_uart_fns(struct at91_port_fns *fns); +#if defined(CONFIG_SERIAL_ATMEL) +void atmel_register_uart_fns(struct atmel_port_fns *fns); #else -#define at91_register_uart_fns(fns) do { } while (0) +#define atmel_register_uart_fns(fns) do { } while (0) #endif diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h index b13322dccf4..c1b264dff28 100644 --- a/include/asm-arm/pgtable-nommu.h +++ b/include/asm-arm/pgtable-nommu.h @@ -13,7 +13,6 @@ #ifndef __ASSEMBLY__ -#include <linux/config.h> #include <linux/slab.h> #include <asm/processor.h> #include <asm/page.h> diff --git a/include/asm-avr32/arch-at32ap/at91rm9200_usart.h b/include/asm-avr32/arch-at32ap/at91rm9200_usart.h deleted file mode 100644 index 79f851e31b9..00000000000 --- a/include/asm-avr32/arch-at32ap/at91rm9200_usart.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/asm-arm/arch-at91rm9200/at91rm9200_usart.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * USART registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_USART_H -#define AT91RM9200_USART_H - -#define AT91_US_CR 0x00 /* Control Register */ -#define AT91_US_RSTRX (1 << 2) /* Reset Receiver */ -#define AT91_US_RSTTX (1 << 3) /* Reset Transmitter */ -#define AT91_US_RXEN (1 << 4) /* Receiver Enable */ -#define AT91_US_RXDIS (1 << 5) /* Receiver Disable */ -#define AT91_US_TXEN (1 << 6) /* Transmitter Enable */ -#define AT91_US_TXDIS (1 << 7) /* Transmitter Disable */ -#define AT91_US_RSTSTA (1 << 8) /* Reset Status Bits */ -#define AT91_US_STTBRK (1 << 9) /* Start Break */ -#define AT91_US_STPBRK (1 << 10) /* Stop Break */ -#define AT91_US_STTTO (1 << 11) /* Start Time-out */ -#define AT91_US_SENDA (1 << 12) /* Send Address */ -#define AT91_US_RSTIT (1 << 13) /* Reset Iterations */ -#define AT91_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */ -#define AT91_US_RETTO (1 << 15) /* Rearm Time-out */ -#define AT91_US_DTREN (1 << 16) /* Data Terminal Ready Enable */ -#define AT91_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable */ -#define AT91_US_RTSEN (1 << 18) /* Request To Send Enable */ -#define AT91_US_RTSDIS (1 << 19) /* Request To Send Disable */ - -#define AT91_US_MR 0x04 /* Mode Register */ -#define AT91_US_USMODE (0xf << 0) /* Mode of the USART */ -#define AT91_US_USMODE_NORMAL 0 -#define AT91_US_USMODE_RS485 1 -#define AT91_US_USMODE_HWHS 2 -#define AT91_US_USMODE_MODEM 3 -#define AT91_US_USMODE_ISO7816_T0 4 -#define AT91_US_USMODE_ISO7816_T1 6 -#define AT91_US_USMODE_IRDA 8 -#define AT91_US_USCLKS (3 << 4) /* Clock Selection */ -#define AT91_US_CHRL (3 << 6) /* Character Length */ -#define AT91_US_CHRL_5 (0 << 6) -#define AT91_US_CHRL_6 (1 << 6) -#define AT91_US_CHRL_7 (2 << 6) -#define AT91_US_CHRL_8 (3 << 6) -#define AT91_US_SYNC (1 << 8) /* Synchronous Mode Select */ -#define AT91_US_PAR (7 << 9) /* Parity Type */ -#define AT91_US_PAR_EVEN (0 << 9) -#define AT91_US_PAR_ODD (1 << 9) -#define AT91_US_PAR_SPACE (2 << 9) -#define AT91_US_PAR_MARK (3 << 9) -#define AT91_US_PAR_NONE (4 << 9) -#define AT91_US_PAR_MULTI_DROP (6 << 9) -#define AT91_US_NBSTOP (3 << 12) /* Number of Stop Bits */ -#define AT91_US_NBSTOP_1 (0 << 12) -#define AT91_US_NBSTOP_1_5 (1 << 12) -#define AT91_US_NBSTOP_2 (2 << 12) -#define AT91_US_CHMODE (3 << 14) /* Channel Mode */ -#define AT91_US_CHMODE_NORMAL (0 << 14) -#define AT91_US_CHMODE_ECHO (1 << 14) -#define AT91_US_CHMODE_LOC_LOOP (2 << 14) -#define AT91_US_CHMODE_REM_LOOP (3 << 14) -#define AT91_US_MSBF (1 << 16) /* Bit Order */ -#define AT91_US_MODE9 (1 << 17) /* 9-bit Character Length */ -#define AT91_US_CLKO (1 << 18) /* Clock Output Select */ -#define AT91_US_OVER (1 << 19) /* Oversampling Mode */ -#define AT91_US_INACK (1 << 20) /* Inhibit Non Acknowledge */ -#define AT91_US_DSNACK (1 << 21) /* Disable Successive NACK */ -#define AT91_US_MAX_ITER (7 << 24) /* Max Iterations */ -#define AT91_US_FILTER (1 << 28) /* Infrared Receive Line Filter */ - -#define AT91_US_IER 0x08 /* Interrupt Enable Register */ -#define AT91_US_RXRDY (1 << 0) /* Receiver Ready */ -#define AT91_US_TXRDY (1 << 1) /* Transmitter Ready */ -#define AT91_US_RXBRK (1 << 2) /* Break Received / End of Break */ -#define AT91_US_ENDRX (1 << 3) /* End of Receiver Transfer */ -#define AT91_US_ENDTX (1 << 4) /* End of Transmitter Transfer */ -#define AT91_US_OVRE (1 << 5) /* Overrun Error */ -#define AT91_US_FRAME (1 << 6) /* Framing Error */ -#define AT91_US_PARE (1 << 7) /* Parity Error */ -#define AT91_US_TIMEOUT (1 << 8) /* Receiver Time-out */ -#define AT91_US_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define AT91_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */ -#define AT91_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */ -#define AT91_US_RXBUFF (1 << 12) /* Reception Buffer Full */ -#define AT91_US_NACK (1 << 13) /* Non Acknowledge */ -#define AT91_US_RIIC (1 << 16) /* Ring Indicator Input Change */ -#define AT91_US_DSRIC (1 << 17) /* Data Set Ready Input Change */ -#define AT91_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change */ -#define AT91_US_CTSIC (1 << 19) /* Clear to Send Input Change */ -#define AT91_US_RI (1 << 20) /* RI */ -#define AT91_US_DSR (1 << 21) /* DSR */ -#define AT91_US_DCD (1 << 22) /* DCD */ -#define AT91_US_CTS (1 << 23) /* CTS */ - -#define AT91_US_IDR 0x0c /* Interrupt Disable Register */ -#define AT91_US_IMR 0x10 /* Interrupt Mask Register */ -#define AT91_US_CSR 0x14 /* Channel Status Register */ -#define AT91_US_RHR 0x18 /* Receiver Holding Register */ -#define AT91_US_THR 0x1c /* Transmitter Holding Register */ - -#define AT91_US_BRGR 0x20 /* Baud Rate Generator Register */ -#define AT91_US_CD (0xffff << 0) /* Clock Divider */ - -#define AT91_US_RTOR 0x24 /* Receiver Time-out Register */ -#define AT91_US_TO (0xffff << 0) /* Time-out Value */ - -#define AT91_US_TTGR 0x28 /* Transmitter Timeguard Register */ -#define AT91_US_TG (0xff << 0) /* Timeguard Value */ - -#define AT91_US_FIDI 0x40 /* FI DI Ratio Register */ -#define AT91_US_NER 0x44 /* Number of Errors Register */ -#define AT91_US_IF 0x4c /* IrDA Filter Register */ - -#endif diff --git a/include/asm-avr32/arch-at32ap/board.h b/include/asm-avr32/arch-at32ap/board.h index 39368e18ab2..a39b3e999f1 100644 --- a/include/asm-avr32/arch-at32ap/board.h +++ b/include/asm-avr32/arch-at32ap/board.h @@ -9,9 +9,15 @@ /* Add basic devices: system manager, interrupt controller, portmuxes, etc. */ void at32_add_system_devices(void); -#define AT91_NR_UART 4 -extern struct platform_device *at91_default_console_device; +#define ATMEL_MAX_UART 4 +extern struct platform_device *atmel_default_console_device; +struct atmel_uart_data { + short use_dma_tx; /* use transmit DMA? */ + short use_dma_rx; /* use receive DMA? */ + void __iomem *regs; /* virtual base address, if any */ +}; +void at32_map_usart(unsigned int hw_id, unsigned int line); struct platform_device *at32_add_device_usart(unsigned int id); struct eth_platform_data { diff --git a/include/asm-avr32/arch-at32ap/init.h b/include/asm-avr32/arch-at32ap/init.h index 43722634e06..5e75d850d70 100644 --- a/include/asm-avr32/arch-at32ap/init.h +++ b/include/asm-avr32/arch-at32ap/init.h @@ -11,6 +11,7 @@ #define __ASM_AVR32_AT32AP_INIT_H__ void setup_platform(void); +void setup_board(void); /* Called by setup_platform */ void at32_clock_init(void); diff --git a/include/asm-avr32/mach/serial_at91.h b/include/asm-avr32/mach/serial_at91.h index 1290bb32802..55b317a8906 100644 --- a/include/asm-avr32/mach/serial_at91.h +++ b/include/asm-avr32/mach/serial_at91.h @@ -14,7 +14,7 @@ struct uart_port; * This is a temporary structure for registering these * functions; it is intended to be discarded after boot. */ -struct at91_port_fns { +struct atmel_port_fns { void (*set_mctrl)(struct uart_port *, u_int); u_int (*get_mctrl)(struct uart_port *); void (*enable_ms)(struct uart_port *); @@ -24,10 +24,10 @@ struct at91_port_fns { void (*close)(struct uart_port *); }; -#if defined(CONFIG_SERIAL_AT91) -void at91_register_uart_fns(struct at91_port_fns *fns); +#if defined(CONFIG_SERIAL_ATMEL) +void atmel_register_uart_fns(struct atmel_port_fns *fns); #else -#define at91_register_uart_fns(fns) do { } while (0) +#define atmel_register_uart_fns(fns) do { } while (0) #endif diff --git a/include/asm-i386/alternative-asm.i b/include/asm-i386/alternative-asm.i index 6c47e3b9484..f0510209ccb 100644 --- a/include/asm-i386/alternative-asm.i +++ b/include/asm-i386/alternative-asm.i @@ -1,5 +1,3 @@ -#include <linux/config.h> - #ifdef CONFIG_SMP .macro LOCK_PREFIX 1: lock diff --git a/include/asm-i386/frame.i b/include/asm-i386/frame.i index 4d68ddce18b..03620251ae1 100644 --- a/include/asm-i386/frame.i +++ b/include/asm-i386/frame.i @@ -1,4 +1,3 @@ -#include <linux/config.h> #include <asm/dwarf2.h> /* The annotation hides the frame from the unwinder and makes it look diff --git a/include/asm-mips/mach-pnx8550/uart.h b/include/asm-mips/mach-pnx8550/uart.h index e32b9a23d70..814a7a15ab4 100644 --- a/include/asm-mips/mach-pnx8550/uart.h +++ b/include/asm-mips/mach-pnx8550/uart.h @@ -13,4 +13,18 @@ #define PNX8550_UART_INT(x) (PNX8550_INT_GIC_MIN+19+x) #define IRQ_TO_UART(x) (x-PNX8550_INT_GIC_MIN-19) +/* early macros needed for prom/kgdb */ + +#define ip3106_lcr(base,port) *(volatile u32 *)(base+(port*0x1000) + 0x000) +#define ip3106_mcr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x004) +#define ip3106_baud(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x008) +#define ip3106_cfg(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x00C) +#define ip3106_fifo(base, port) *(volatile u32 *)(base+(port*0x1000) + 0x028) +#define ip3106_istat(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE0) +#define ip3106_ien(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE4) +#define ip3106_iclr(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFE8) +#define ip3106_iset(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFEC) +#define ip3106_pd(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFF4) +#define ip3106_mid(base, port) *(volatile u32 *)(base+(port*0x1000) + 0xFFC) + #endif diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index 4da41efb131..89ed545b446 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -9,7 +9,6 @@ * 2 of the License, or (at your option) any later version. */ -#include <linux/config.h> #include <linux/threads.h> #include <linux/list.h> #include <linux/radix-tree.h> diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h index 4f55573762b..86ee46b09b8 100644 --- a/include/asm-powerpc/pci-bridge.h +++ b/include/asm-powerpc/pci-bridge.h @@ -6,7 +6,6 @@ #include <asm-ppc/pci-bridge.h> #else -#include <linux/config.h> #include <linux/pci.h> #include <linux/list.h> diff --git a/include/asm-sparc64/compat_signal.h b/include/asm-sparc64/compat_signal.h index 7aefa301321..b759eab9b51 100644 --- a/include/asm-sparc64/compat_signal.h +++ b/include/asm-sparc64/compat_signal.h @@ -1,7 +1,6 @@ #ifndef _COMPAT_SIGNAL_H #define _COMPAT_SIGNAL_H -#include <linux/config.h> #include <linux/compat.h> #include <asm/signal.h> diff --git a/include/asm-x86_64/alternative-asm.i b/include/asm-x86_64/alternative-asm.i index e4041f4fa4d..0b3f1a2bb2c 100644 --- a/include/asm-x86_64/alternative-asm.i +++ b/include/asm-x86_64/alternative-asm.i @@ -1,5 +1,3 @@ -#include <linux/config.h> - #ifdef CONFIG_SMP .macro LOCK_PREFIX 1: lock diff --git a/include/linux/Kbuild b/include/linux/Kbuild index ea005c0a79f..5114ff18101 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -100,7 +100,6 @@ header-y += ipx.h header-y += irda.h header-y += isdn_divertif.h header-y += iso_fs.h -header-y += ite_gpio.h header-y += ixjuser.h header-y += jffs2.h header-y += keyctl.h diff --git a/include/linux/config.h b/include/linux/config.h index a91f5e55b52..479ffb0a22d 100644 --- a/include/linux/config.h +++ b/include/linux/config.h @@ -3,6 +3,7 @@ /* This file is no longer in use and kept only for backward compatibility. * autoconf.h is now included via -imacros on the commandline */ +#warning Including config.h is deprecated. #include <linux/autoconf.h> #endif diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index de2e68159d9..b661c19f3f7 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -67,8 +67,8 @@ /* Parisc type numbers. */ #define PORT_MUX 48 -/* Atmel AT91xxx SoC */ -#define PORT_AT91 49 +/* Atmel AT91 / AT32 SoC */ +#define PORT_ATMEL 49 /* Macintosh Zilog type numbers */ #define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */ diff --git a/include/net/netdma.h b/include/net/netdma.h index 7f53cd1d8b1..f28c6e064e8 100644 --- a/include/net/netdma.h +++ b/include/net/netdma.h @@ -20,7 +20,6 @@ */ #ifndef NETDMA_H #define NETDMA_H -#include <linux/config.h> #ifdef CONFIG_NET_DMA #include <linux/dmaengine.h> #include <linux/skbuff.h> |