aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-powerpc/8xx_immap.h2
-rw-r--r--include/asm-powerpc/commproc.h2
-rw-r--r--include/asm-powerpc/cpm.h1
-rw-r--r--include/asm-powerpc/cputhreads.h71
-rw-r--r--include/asm-powerpc/dma-mapping.h3
-rw-r--r--include/asm-powerpc/firmware.h2
-rw-r--r--include/asm-powerpc/immap_86xx.h25
-rw-r--r--include/asm-powerpc/io.h5
-rw-r--r--include/asm-powerpc/iommu.h3
-rw-r--r--include/asm-powerpc/ipic.h12
-rw-r--r--include/asm-powerpc/iseries/hv_lp_event.h2
-rw-r--r--include/asm-powerpc/machdep.h58
-rw-r--r--include/asm-powerpc/mmu-hash64.h1
-rw-r--r--include/asm-powerpc/nvram.h11
-rw-r--r--include/asm-powerpc/of_platform.h12
-rw-r--r--include/asm-powerpc/pci-bridge.h191
-rw-r--r--include/asm-powerpc/pci.h29
-rw-r--r--include/asm-powerpc/ppc-pci.h4
-rw-r--r--include/asm-powerpc/prom.h4
-rw-r--r--include/asm-powerpc/qe.h95
-rw-r--r--include/asm-powerpc/reg.h6
-rw-r--r--include/asm-powerpc/reg_booke.h15
-rw-r--r--include/asm-powerpc/smu.h142
-rw-r--r--include/asm-powerpc/spu.h28
-rw-r--r--include/asm-powerpc/spu_csa.h13
-rw-r--r--include/asm-powerpc/spu_priv1.h15
-rw-r--r--include/asm-ppc/8xx_immap.h2
-rw-r--r--include/asm-ppc/commproc.h2
-rw-r--r--include/asm-ppc/reg_booke.h2
-rw-r--r--include/linux/of.h4
-rw-r--r--include/linux/pmu.h36
31 files changed, 533 insertions, 265 deletions
diff --git a/include/asm-powerpc/8xx_immap.h b/include/asm-powerpc/8xx_immap.h
index 1311cefdfd3..4b0e1520600 100644
--- a/include/asm-powerpc/8xx_immap.h
+++ b/include/asm-powerpc/8xx_immap.h
@@ -123,7 +123,7 @@ typedef struct mem_ctlr {
#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */
#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/
#define OR_BI 0x00000100 /* Burst inhibit */
-#define OR_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */
+#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */
#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */
#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */
#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
index 2ee59d7b335..9e3b8648648 100644
--- a/include/asm-powerpc/commproc.h
+++ b/include/asm-powerpc/commproc.h
@@ -693,7 +693,7 @@ typedef struct risc_timer_pram {
#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
diff --git a/include/asm-powerpc/cpm.h b/include/asm-powerpc/cpm.h
index 48df9f330e7..fae83b13733 100644
--- a/include/asm-powerpc/cpm.h
+++ b/include/asm-powerpc/cpm.h
@@ -10,5 +10,6 @@ int cpm_muram_free(unsigned long offset);
unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
void __iomem *cpm_muram_addr(unsigned long offset);
dma_addr_t cpm_muram_dma(void __iomem *addr);
+int cpm_command(u32 command, u8 opcode);
#endif
diff --git a/include/asm-powerpc/cputhreads.h b/include/asm-powerpc/cputhreads.h
new file mode 100644
index 00000000000..8485c28b5f4
--- /dev/null
+++ b/include/asm-powerpc/cputhreads.h
@@ -0,0 +1,71 @@
+#ifndef _ASM_POWERPC_CPUTHREADS_H
+#define _ASM_POWERPC_CPUTHREADS_H
+
+#include <linux/cpumask.h>
+
+/*
+ * Mapping of threads to cores
+ */
+
+#ifdef CONFIG_SMP
+extern int threads_per_core;
+extern int threads_shift;
+extern cpumask_t threads_core_mask;
+#else
+#define threads_per_core 1
+#define threads_shift 0
+#define threads_core_mask (CPU_MASK_CPU0)
+#endif
+
+/* cpu_thread_mask_to_cores - Return a cpumask of one per cores
+ * hit by the argument
+ *
+ * @threads: a cpumask of threads
+ *
+ * This function returns a cpumask which will have one "cpu" (or thread)
+ * bit set for each core that has at least one thread set in the argument.
+ *
+ * This can typically be used for things like IPI for tlb invalidations
+ * since those need to be done only once per core/TLB
+ */
+static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
+{
+ cpumask_t tmp, res;
+ int i;
+
+ res = CPU_MASK_NONE;
+ for (i = 0; i < NR_CPUS; i += threads_per_core) {
+ cpus_shift_right(tmp, threads_core_mask, i);
+ if (cpus_intersects(threads, tmp))
+ cpu_set(i, res);
+ }
+ return res;
+}
+
+static inline int cpu_nr_cores(void)
+{
+ return NR_CPUS >> threads_shift;
+}
+
+static inline cpumask_t cpu_online_cores_map(void)
+{
+ return cpu_thread_mask_to_cores(cpu_online_map);
+}
+
+static inline int cpu_thread_to_core(int cpu)
+{
+ return cpu >> threads_shift;
+}
+
+static inline int cpu_thread_in_core(int cpu)
+{
+ return cpu & (threads_per_core - 1);
+}
+
+static inline int cpu_first_thread_in_core(int cpu)
+{
+ return cpu & ~(threads_per_core - 1);
+}
+
+#endif /* _ASM_POWERPC_CPUTHREADS_H */
+
diff --git a/include/asm-powerpc/dma-mapping.h b/include/asm-powerpc/dma-mapping.h
index ff52013c0e2..e974876e18d 100644
--- a/include/asm-powerpc/dma-mapping.h
+++ b/include/asm-powerpc/dma-mapping.h
@@ -87,6 +87,9 @@ static inline int dma_supported(struct device *dev, u64 mask)
return dma_ops->dma_supported(dev, mask);
}
+/* We have our own implementation of pci_set_dma_mask() */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
static inline int dma_set_mask(struct device *dev, u64 dma_mask)
{
struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
diff --git a/include/asm-powerpc/firmware.h b/include/asm-powerpc/firmware.h
index 3671c128f27..1e41bd1c850 100644
--- a/include/asm-powerpc/firmware.h
+++ b/include/asm-powerpc/firmware.h
@@ -64,7 +64,7 @@ enum {
FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
- FW_FEATURE_CELLEB_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
+ FW_FEATURE_CELLEB_ALWAYS = 0,
FW_FEATURE_NATIVE_POSSIBLE = 0,
FW_FEATURE_NATIVE_ALWAYS = 0,
FW_FEATURE_POSSIBLE =
diff --git a/include/asm-powerpc/immap_86xx.h b/include/asm-powerpc/immap_86xx.h
index 0ad4e653d46..0f165e59c32 100644
--- a/include/asm-powerpc/immap_86xx.h
+++ b/include/asm-powerpc/immap_86xx.h
@@ -89,14 +89,14 @@ struct ccsr_guts {
* them.
*
* guts: Pointer to GUTS structure
- * co: The DMA controller (1 or 2)
+ * co: The DMA controller (0 or 1)
* ch: The channel on the DMA controller (0, 1, 2, or 3)
* device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
*/
static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
unsigned int co, unsigned int ch, unsigned int device)
{
- unsigned int shift = 16 + (8 * (2 - co) + 2 * (3 - ch));
+ unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
}
@@ -118,6 +118,27 @@ static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
#define CCSR_GUTS_PMUXCR_DMA1_0 0x00000002
#define CCSR_GUTS_PMUXCR_DMA1_3 0x00000001
+/*
+ * Set the DMA external control bits in the GUTS
+ *
+ * The DMA external control bits in the PMUXCR are only meaningful for
+ * channels 0 and 3. Any other channels are ignored.
+ *
+ * guts: Pointer to GUTS structure
+ * co: The DMA controller (0 or 1)
+ * ch: The channel on the DMA controller (0, 1, 2, or 3)
+ * value: the new value for the bit (0 or 1)
+ */
+static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
+ unsigned int co, unsigned int ch, unsigned int value)
+{
+ if ((ch == 0) || (ch == 3)) {
+ unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
+
+ clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
+ }
+}
+
#define CCSR_GUTS_CLKDVDR_PXCKEN 0x80000000
#define CCSR_GUTS_CLKDVDR_SSICKEN 0x20000000
#define CCSR_GUTS_CLKDVDR_PXCKINV 0x10000000
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index e44cdfc8493..7be26f61575 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -50,15 +50,16 @@ extern int check_legacy_ioport(unsigned long base_port);
#define PCI_DRAM_OFFSET pci_dram_offset
#else
#define _IO_BASE pci_io_base
-#define _ISA_MEM_BASE 0
+#define _ISA_MEM_BASE isa_mem_base
#define PCI_DRAM_OFFSET 0
#endif
extern unsigned long isa_io_base;
-extern unsigned long isa_mem_base;
extern unsigned long pci_io_base;
extern unsigned long pci_dram_offset;
+extern resource_size_t isa_mem_base;
+
#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
#endif
diff --git a/include/asm-powerpc/iommu.h b/include/asm-powerpc/iommu.h
index 4a82fdccee9..7a3cef785ab 100644
--- a/include/asm-powerpc/iommu.h
+++ b/include/asm-powerpc/iommu.h
@@ -69,10 +69,9 @@ struct iommu_table {
};
struct scatterlist;
-struct device_node;
/* Frees table for an individual device node */
-extern void iommu_free_table(struct device_node *dn);
+extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
/* Initializes an iommu_table based in values set in the passed-in
* structure
diff --git a/include/asm-powerpc/ipic.h b/include/asm-powerpc/ipic.h
index edec79dcb7c..8ff08be0014 100644
--- a/include/asm-powerpc/ipic.h
+++ b/include/asm-powerpc/ipic.h
@@ -20,11 +20,13 @@
/* Flags when we init the IPIC */
#define IPIC_SPREADMODE_GRP_A 0x00000001
-#define IPIC_SPREADMODE_GRP_D 0x00000002
-#define IPIC_SPREADMODE_MIX_A 0x00000004
-#define IPIC_SPREADMODE_MIX_B 0x00000008
-#define IPIC_DISABLE_MCP_OUT 0x00000010
-#define IPIC_IRQ0_MCP 0x00000020
+#define IPIC_SPREADMODE_GRP_B 0x00000002
+#define IPIC_SPREADMODE_GRP_C 0x00000004
+#define IPIC_SPREADMODE_GRP_D 0x00000008
+#define IPIC_SPREADMODE_MIX_A 0x00000010
+#define IPIC_SPREADMODE_MIX_B 0x00000020
+#define IPIC_DISABLE_MCP_OUT 0x00000040
+#define IPIC_IRQ0_MCP 0x00000080
/* IPIC registers offsets */
#define IPIC_SICFR 0x00 /* System Global Interrupt Configuration Register */
diff --git a/include/asm-powerpc/iseries/hv_lp_event.h b/include/asm-powerpc/iseries/hv_lp_event.h
index 6ce2ce1e269..8f5da7d7720 100644
--- a/include/asm-powerpc/iseries/hv_lp_event.h
+++ b/include/asm-powerpc/iseries/hv_lp_event.h
@@ -78,7 +78,7 @@ extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
/*
* Close an Lp Event Path for a type and partition
- * returns 0 on sucess
+ * returns 0 on success
*/
extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
diff --git a/include/asm-powerpc/machdep.h b/include/asm-powerpc/machdep.h
index 6968f4300dc..0872ec228c1 100644
--- a/include/asm-powerpc/machdep.h
+++ b/include/asm-powerpc/machdep.h
@@ -204,6 +204,13 @@ struct machdep_calls {
/*
* optional PCI "hooks"
*/
+ /* Called in indirect_* to avoid touching devices */
+ int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
+
+ /* Called at then very end of pcibios_init() */
+ void (*pcibios_after_init)(void);
+
+#endif /* CONFIG_PPC32 */
/* Called after PPC generic resource fixup to perform
machine specific fixups */
@@ -212,18 +219,9 @@ struct machdep_calls {
/* Called for each PCI bus in the system when it's probed */
void (*pcibios_fixup_bus)(struct pci_bus *);
- /* Called when pci_enable_device() is called (initial=0) or
- * when a device with no assigned resource is found (initial=1).
- * Returns 0 to allow assignment/enabling of the device. */
- int (*pcibios_enable_device_hook)(struct pci_dev *, int initial);
-
- /* Called in indirect_* to avoid touching devices */
- int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
-
- /* Called at then very end of pcibios_init() */
- void (*pcibios_after_init)(void);
-
-#endif /* CONFIG_PPC32 */
+ /* Called when pci_enable_device() is called. Returns 0 to
+ * allow assignment/enabling of the device. */
+ int (*pcibios_enable_device_hook)(struct pci_dev *);
/* Called to shutdown machine specific hardware not already controlled
* by other drivers.
@@ -253,6 +251,16 @@ struct machdep_calls {
*/
void (*machine_kexec)(struct kimage *image);
#endif /* CONFIG_KEXEC */
+
+#ifdef CONFIG_SUSPEND
+ /* These are called to disable and enable, respectively, IRQs when
+ * entering a suspend state. If NULL, then the generic versions
+ * will be called. The generic versions disable/enable the
+ * decrementer along with interrupts.
+ */
+ void (*suspend_disable_irqs)(void);
+ void (*suspend_enable_irqs)(void);
+#endif
};
extern void power4_idle(void);
@@ -326,5 +334,31 @@ static inline void log_error(char *buf, unsigned int err_type, int fatal)
ppc_md.log_error(buf, err_type, fatal);
}
+#define __define_machine_initcall(mach,level,fn,id) \
+ static int __init __machine_initcall_##mach##_##fn(void) { \
+ if (machine_is(mach)) return fn(); \
+ return 0; \
+ } \
+ __define_initcall(level,__machine_initcall_##mach##_##fn,id);
+
+#define machine_core_initcall(mach,fn) __define_machine_initcall(mach,"1",fn,1)
+#define machine_core_initcall_sync(mach,fn) __define_machine_initcall(mach,"1s",fn,1s)
+#define machine_postcore_initcall(mach,fn) __define_machine_initcall(mach,"2",fn,2)
+#define machine_postcore_initcall_sync(mach,fn) __define_machine_initcall(mach,"2s",fn,2s)
+#define machine_arch_initcall(mach,fn) __define_machine_initcall(mach,"3",fn,3)
+#define machine_arch_initcall_sync(mach,fn) __define_machine_initcall(mach,"3s",fn,3s)
+#define machine_subsys_initcall(mach,fn) __define_machine_initcall(mach,"4",fn,4)
+#define machine_subsys_initcall_sync(mach,fn) __define_machine_initcall(mach,"4s",fn,4s)
+#define machine_fs_initcall(mach,fn) __define_machine_initcall(mach,"5",fn,5)
+#define machine_fs_initcall_sync(mach,fn) __define_machine_initcall(mach,"5s",fn,5s)
+#define machine_rootfs_initcall(mach,fn) __define_machine_initcall(mach,"rootfs",fn,rootfs)
+#define machine_device_initcall(mach,fn) __define_machine_initcall(mach,"6",fn,6)
+#define machine_device_initcall_sync(mach,fn) __define_machine_initcall(mach,"6s",fn,6s)
+#define machine_late_initcall(mach,fn) __define_machine_initcall(mach,"7",fn,7)
+#define machine_late_initcall_sync(mach,fn) __define_machine_initcall(mach,"7s",fn,7s)
+
+void generic_suspend_disable_irqs(void);
+void generic_suspend_enable_irqs(void);
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_MACHDEP_H */
diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h
index 82328dec2b5..12e5e773c67 100644
--- a/include/asm-powerpc/mmu-hash64.h
+++ b/include/asm-powerpc/mmu-hash64.h
@@ -180,6 +180,7 @@ extern int mmu_vmalloc_psize;
extern int mmu_io_psize;
extern int mmu_kernel_ssize;
extern int mmu_highuser_ssize;
+extern u16 mmu_slb_size;
/*
* If the processor supports 64k normal pages but not 64k cache
diff --git a/include/asm-powerpc/nvram.h b/include/asm-powerpc/nvram.h
index 9877982508b..4e7059cc611 100644
--- a/include/asm-powerpc/nvram.h
+++ b/include/asm-powerpc/nvram.h
@@ -10,6 +10,8 @@
#ifndef _ASM_POWERPC_NVRAM_H
#define _ASM_POWERPC_NVRAM_H
+#include <linux/errno.h>
+
#define NVRW_CNT 0x20
#define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */
#define NVRAM_BLOCK_LEN 16
@@ -71,7 +73,16 @@ extern int nvram_clear_error_log(void);
extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
extern int pSeries_nvram_init(void);
+
+#ifdef CONFIG_MMIO_NVRAM
extern int mmio_nvram_init(void);
+#else
+static inline int mmio_nvram_init(void)
+{
+ return -ENODEV;
+}
+#endif
+
#endif /* __KERNEL__ */
/* PowerMac specific nvram stuffs */
diff --git a/include/asm-powerpc/of_platform.h b/include/asm-powerpc/of_platform.h
index 80e6fad28b4..1bce5efe1de 100644
--- a/include/asm-powerpc/of_platform.h
+++ b/include/asm-powerpc/of_platform.h
@@ -15,8 +15,14 @@
#include <linux/of_platform.h>
/* Platform drivers register/unregister */
-extern int of_register_platform_driver(struct of_platform_driver *drv);
-extern void of_unregister_platform_driver(struct of_platform_driver *drv);
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+ return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+ of_unregister_driver(drv);
+}
/* Platform devices and busses creation */
extern struct of_device *of_platform_device_create(struct device_node *np,
@@ -26,7 +32,7 @@ extern struct of_device *of_platform_device_create(struct device_node *np,
#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
extern int of_platform_bus_probe(struct device_node *root,
- struct of_device_id *matches,
+ const struct of_device_id *matches,
struct device *parent);
extern struct of_device *of_find_device_by_phandle(phandle ph);
diff --git a/include/asm-powerpc/pci-bridge.h b/include/asm-powerpc/pci-bridge.h
index d8bdc79db12..9b16d3b1716 100644
--- a/include/asm-powerpc/pci-bridge.h
+++ b/include/asm-powerpc/pci-bridge.h
@@ -1,15 +1,42 @@
#ifndef _ASM_POWERPC_PCI_BRIDGE_H
#define _ASM_POWERPC_PCI_BRIDGE_H
#ifdef __KERNEL__
-
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
#include <linux/pci.h>
#include <linux/list.h>
#include <linux/ioport.h>
-#ifndef CONFIG_PPC64
-
struct device_node;
-struct pci_controller;
+
+extern unsigned int ppc_pci_flags;
+enum {
+ /* Force re-assigning all resources (ignore firmware
+ * setup completely)
+ */
+ PPC_PCI_REASSIGN_ALL_RSRC = 0x00000001,
+
+ /* Re-assign all bus numbers */
+ PPC_PCI_REASSIGN_ALL_BUS = 0x00000002,
+
+ /* Do not try to assign, just use existing setup */
+ PPC_PCI_PROBE_ONLY = 0x00000004,
+
+ /* Don't bother with ISA alignment unless the bridge has
+ * ISA forwarding enabled
+ */
+ PPC_PCI_CAN_SKIP_ISA_ALIGN = 0x00000008,
+
+ /* Enable domain numbers in /proc */
+ PPC_PCI_ENABLE_PROC_DOMAINS = 0x00000010,
+ /* ... except for domain 0 */
+ PPC_PCI_COMPAT_DOMAIN_0 = 0x00000020,
+};
+
/*
* Structure of a PCI controller (host bridge)
@@ -17,26 +44,41 @@ struct pci_controller;
struct pci_controller {
struct pci_bus *bus;
char is_dynamic;
- void *arch_data;
+#ifdef CONFIG_PPC64
+ int node;
+#endif
+ struct device_node *dn;
struct list_head list_node;
struct device *parent;
int first_busno;
int last_busno;
+#ifndef CONFIG_PPC64
int self_busno;
+#endif
void __iomem *io_base_virt;
+#ifdef CONFIG_PPC64
+ void *io_base_alloc;
+#endif
resource_size_t io_base_phys;
+#ifndef CONFIG_PPC64
+ resource_size_t pci_io_size;
+#endif
/* Some machines (PReP) have a non 1:1 mapping of
* the PCI memory space in the CPU bus space
*/
resource_size_t pci_mem_offset;
+#ifdef CONFIG_PPC64
+ unsigned long pci_io_size;
+#endif
struct pci_ops *ops;
- volatile unsigned int __iomem *cfg_addr;
- volatile void __iomem *cfg_data;
+ unsigned int __iomem *cfg_addr;
+ void __iomem *cfg_data;
+#ifndef CONFIG_PPC64
/*
* Used for variants of PCI indirect handling and possible quirks:
* SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
@@ -51,21 +93,30 @@ struct pci_controller {
* set.
* BIG_ENDIAN - cfg_addr is a big endian register
*/
-#define PPC_INDIRECT_TYPE_SET_CFG_TYPE (0x00000001)
-#define PPC_INDIRECT_TYPE_EXT_REG (0x00000002)
-#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS (0x00000004)
-#define PPC_INDIRECT_TYPE_NO_PCIE_LINK (0x00000008)
-#define PPC_INDIRECT_TYPE_BIG_ENDIAN (0x00000010)
+#define PPC_INDIRECT_TYPE_SET_CFG_TYPE 0x00000001
+#define PPC_INDIRECT_TYPE_EXT_REG 0x00000002
+#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS 0x00000004
+#define PPC_INDIRECT_TYPE_NO_PCIE_LINK 0x00000008
+#define PPC_INDIRECT_TYPE_BIG_ENDIAN 0x00000010
u32 indirect_type;
-
+#endif /* !CONFIG_PPC64 */
/* Currently, we limit ourselves to 1 IO range and 3 mem
* ranges since the common pci_bus structure can't handle more
*/
struct resource io_resource;
struct resource mem_resources[3];
int global_number; /* PCI domain number */
+#ifdef CONFIG_PPC64
+ unsigned long buid;
+ unsigned long dma_window_base_cur;
+ unsigned long dma_window_size;
+
+ void *private_data;
+#endif /* CONFIG_PPC64 */
};
+#ifndef CONFIG_PPC64
+
static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
{
return bus->sysdata;
@@ -81,18 +132,18 @@ static inline int isa_vaddr_is_ioport(void __iomem *address)
/* These are used for config access before all the PCI probing
has been done. */
-int early_read_config_byte(struct pci_controller *hose, int bus, int dev_fn,
- int where, u8 *val);
-int early_read_config_word(struct pci_controller *hose, int bus, int dev_fn,
- int where, u16 *val);
-int early_read_config_dword(struct pci_controller *hose, int bus, int dev_fn,
- int where, u32 *val);
-int early_write_config_byte(struct pci_controller *hose, int bus, int dev_fn,
- int where, u8 val);
-int early_write_config_word(struct pci_controller *hose, int bus, int dev_fn,
- int where, u16 val);
-int early_write_config_dword(struct pci_controller *hose, int bus, int dev_fn,
- int where, u32 val);
+extern int early_read_config_byte(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u8 *val);
+extern int early_read_config_word(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u16 *val);
+extern int early_read_config_dword(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u32 *val);
+extern int early_write_config_byte(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u8 val);
+extern int early_write_config_word(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u16 val);
+extern int early_write_config_dword(struct pci_controller *hose, int bus,
+ int dev_fn, int where, u32 val);
extern int early_find_capability(struct pci_controller *hose, int bus,
int dev_fn, int cap);
@@ -104,62 +155,12 @@ extern void setup_grackle(struct pci_controller *hose);
extern void __init update_bridge_resource(struct pci_dev *dev,
struct resource *res);
-#else
-
-
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
- struct pci_bus *bus;
- char is_dynamic;
- int node;
- void *arch_data;
- struct list_head list_node;
- struct device *parent;
-
- int first_busno;
- int last_busno;
-
- void __iomem *io_base_virt;
- void *io_base_alloc;
- resource_size_t io_base_phys;
-
- /* Some machines have a non 1:1 mapping of
- * the PCI memory space in the CPU bus space
- */
- resource_size_t pci_mem_offset;
- unsigned long pci_io_size;
-
- struct pci_ops *ops;
- volatile unsigned int __iomem *cfg_addr;
- volatile void __iomem *cfg_data;
-
- /* Currently, we limit ourselves to 1 IO range and 3 mem
- * ranges since the common pci_bus structure can't handle more
- */
- struct resource io_resource;
- struct resource mem_resources[3];
- int global_number;
- unsigned long buid;
- unsigned long dma_window_base_cur;
- unsigned long dma_window_size;
-
- void *private_data;
-};
+#else /* CONFIG_PPC64 */
/*
* PCI stuff, for nodes representing PCI devices, pointed to
* by device_node->data.
*/
-struct pci_controller;
struct iommu_table;
struct pci_dn {
@@ -179,9 +180,9 @@ struct pci_dn {
int eeh_mode; /* See eeh.h for possible EEH_MODEs */
int eeh_config_addr;
int eeh_pe_config_addr; /* new-style partition endpoint address */
- int eeh_check_count; /* # times driver ignored error */
- int eeh_freeze_count; /* # times this device froze up. */
- int eeh_false_positives; /* # times this device reported #ff's */
+ int eeh_check_count; /* # times driver ignored error */
+ int eeh_freeze_count; /* # times this device froze up. */
+ int eeh_false_positives; /* # times this device reported #ff's */
u32 config_space[16]; /* saved PCI config space */
#endif
};
@@ -189,7 +190,7 @@ struct pci_dn {
/* Get the pointer to a device_node's pci_dn */
#define PCI_DN(dn) ((struct pci_dn *) (dn)->data)
-struct device_node *fetch_dev_dn(struct pci_dev *dev);
+extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
/* Get a device_node from a pci_dev. This code must be fast except
* in the case where the sysdata is incorrect and needs to be fixed
@@ -227,14 +228,14 @@ static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
}
/** Find the bus corresponding to the indicated device node */
-struct pci_bus * pcibios_find_pci_bus(struct device_node *dn);
+extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
/** Remove all of the PCI devices under this bus */
-void pcibios_remove_pci_devices(struct pci_bus *bus);
+extern void pcibios_remove_pci_devices(struct pci_bus *bus);
/** Discover new pci devices under this bus, and add them */
-void pcibios_add_pci_devices(struct pci_bus * bus);
-void pcibios_fixup_new_pci_devices(struct pci_bus *bus, int fix_bus);
+extern void pcibios_add_pci_devices(struct pci_bus *bus);
+extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus);
extern int pcibios_remove_root_bus(struct pci_controller *phb);
@@ -270,20 +271,18 @@ extern int pcibios_map_io_space(struct pci_bus *bus);
#define PHB_SET_NODE(PHB, NODE) ((PHB)->node = -1)
#endif
-#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_PPC64 */
/* Get the PCI host controller for an OF device */
-extern struct pci_controller*
-pci_find_hose_for_OF_device(struct device_node* node);
+extern struct pci_controller *pci_find_hose_for_OF_device(
+ struct device_node* node);
/* Fill up host controller resources from the OF node */
-extern void
-pci_process_bridge_OF_ranges(struct pci_controller *hose,
- struct device_node *dev, int primary);
+extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+ struct device_node *dev, int primary);
/* Allocate & free a PCI host bridge structure */
-extern struct pci_controller *
-pcibios_alloc_controller(struct device_node *dev);
+extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
#ifdef CONFIG_PCI
@@ -298,9 +297,7 @@ static inline int pcibios_vaddr_is_ioport(void __iomem *address)
{
return 0;
}
-#endif
-
+#endif /* CONFIG_PCI */
-
-#endif /* __KERNEL__ */
-#endif
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PCI_BRIDGE_H */
diff --git a/include/asm-powerpc/pci.h b/include/asm-powerpc/pci.h
index 7b11765c686..a05a942b1c2 100644
--- a/include/asm-powerpc/pci.h
+++ b/include/asm-powerpc/pci.h
@@ -36,11 +36,10 @@ struct pci_dev;
/*
* Set this to 1 if you want the kernel to re-assign all PCI
- * bus numbers
+ * bus numbers (don't do that on ppc64 yet !)
*/
-extern int pci_assign_all_buses;
-#define pcibios_assign_all_busses() (pci_assign_all_buses)
-
+#define pcibios_assign_all_busses() (ppc_pci_flags & \
+ PPC_PCI_REASSIGN_ALL_BUS)
#define pcibios_scan_all_fns(a, b) 0
static inline void pcibios_set_master(struct pci_dev *dev)
@@ -95,9 +94,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
#define get_pci_dma_ops() NULL
#endif
-/* Decide whether to display the domain number in /proc */
-extern int pci_proc_domain(struct pci_bus *bus);
-
#else /* 32-bit */
#ifdef CONFIG_PCI
@@ -109,17 +105,14 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
*strategy_parameter = ~0UL;
}
#endif
-
-/* Set the name of the bus as it appears in /proc/bus/pci */
-static inline int pci_proc_domain(struct pci_bus *bus)
-{
- return 0;
-}
-
#endif /* CONFIG_PPC64 */
extern int pci_domain_nr(struct pci_bus *bus);
+/* Decide whether to display the domain number in /proc */
+extern int pci_proc_domain(struct pci_bus *bus);
+
+
struct vm_area_struct;
/* Map a range of PCI memory or I/O space for a device into user space */
int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
@@ -199,13 +192,12 @@ static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
return root;
}
-extern void pcibios_fixup_device_resources(struct pci_dev *dev,
- struct pci_bus *bus);
-
extern void pcibios_setup_new_device(struct pci_dev *dev);
extern void pcibios_claim_one_bus(struct pci_bus *b);
+extern void pcibios_resource_survey(void);
+
extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
extern struct pci_dev *of_create_pci_dev(struct device_node *node,
@@ -229,5 +221,8 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc,
resource_size_t *start, resource_size_t *end);
+extern void pcibios_do_bus_setup(struct pci_bus *bus);
+extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus);
+
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_PCI_H */
diff --git a/include/asm-powerpc/ppc-pci.h b/include/asm-powerpc/ppc-pci.h
index b847aa10074..854ab713f56 100644
--- a/include/asm-powerpc/ppc-pci.h
+++ b/include/asm-powerpc/ppc-pci.h
@@ -22,7 +22,6 @@ extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
extern struct list_head hose_list;
-extern int global_phb_number;
extern void find_and_init_phbs(void);
@@ -47,9 +46,6 @@ extern void init_pci_config_tokens (void);
extern unsigned long get_phb_buid (struct device_node *);
extern int rtas_setup_phb(struct pci_controller *phb);
-/* From iSeries PCI */
-extern void iSeries_pcibios_init(void);
-
extern unsigned long pci_probe_only;
/* ---- EEH internal-use-only related routines ---- */
diff --git a/include/asm-powerpc/prom.h b/include/asm-powerpc/prom.h
index 925e2d384bb..78b7b0d494c 100644
--- a/include/asm-powerpc/prom.h
+++ b/include/asm-powerpc/prom.h
@@ -202,6 +202,10 @@ static inline unsigned long of_read_ulong(const u32 *cell, int size)
*/
extern u64 of_translate_address(struct device_node *np, const u32 *addr);
+/* Translate a DMA address from device space to CPU space */
+extern u64 of_translate_dma_address(struct device_node *dev,
+ const u32 *in_addr);
+
/* Extract an address from a device, returns the region size and
* the address space flags too. The PCI version uses a BAR number
* instead of an absolute index
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index 0dabe46a29d..a24b7b14958 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -28,6 +28,52 @@
#define MEM_PART_SECONDARY 1
#define MEM_PART_MURAM 2
+/* Clocks and BRGs */
+enum qe_clock {
+ QE_CLK_NONE = 0,
+ QE_BRG1, /* Baud Rate Generator 1 */
+ QE_BRG2, /* Baud Rate Generator 2 */
+ QE_BRG3, /* Baud Rate Generator 3 */
+ QE_BRG4, /* Baud Rate Generator 4 */
+ QE_BRG5, /* Baud Rate Generator 5 */
+ QE_BRG6, /* Baud Rate Generator 6 */
+ QE_BRG7, /* Baud Rate Generator 7 */
+ QE_BRG8, /* Baud Rate Generator 8 */
+ QE_BRG9, /* Baud Rate Generator 9 */
+ QE_BRG10, /* Baud Rate Generator 10 */
+ QE_BRG11, /* Baud Rate Generator 11 */
+ QE_BRG12, /* Baud Rate Generator 12 */
+ QE_BRG13, /* Baud Rate Generator 13 */
+ QE_BRG14, /* Baud Rate Generator 14 */
+ QE_BRG15, /* Baud Rate Generator 15 */
+ QE_BRG16, /* Baud Rate Generator 16 */
+ QE_CLK1, /* Clock 1 */
+ QE_CLK2, /* Clock 2 */
+ QE_CLK3, /* Clock 3 */
+ QE_CLK4, /* Clock 4 */
+ QE_CLK5, /* Clock 5 */
+ QE_CLK6, /* Clock 6 */
+ QE_CLK7, /* Clock 7 */
+ QE_CLK8, /* Clock 8 */
+ QE_CLK9, /* Clock 9 */
+ QE_CLK10, /* Clock 10 */
+ QE_CLK11, /* Clock 11 */
+ QE_CLK12, /* Clock 12 */
+ QE_CLK13, /* Clock 13 */
+ QE_CLK14, /* Clock 14 */
+ QE_CLK15, /* Clock 15 */
+ QE_CLK16, /* Clock 16 */
+ QE_CLK17, /* Clock 17 */
+ QE_CLK18, /* Clock 18 */
+ QE_CLK19, /* Clock 19 */
+ QE_CLK20, /* Clock 20 */
+ QE_CLK21, /* Clock 21 */
+ QE_CLK22, /* Clock 22 */
+ QE_CLK23, /* Clock 23 */
+ QE_CLK24, /* Clock 24 */
+ QE_CLK_DUMMY
+};
+
/* Export QE common operations */
extern void qe_reset(void);
extern int par_io_init(struct device_node *np);
@@ -38,7 +84,8 @@ extern int par_io_data_set(u8 port, u8 pin, u8 val);
/* QE internal API */
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
-void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier);
+enum qe_clock qe_clock_source(const char *source);
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
unsigned long qe_muram_alloc(int size, int align);
@@ -129,52 +176,6 @@ enum comm_dir {
COMM_DIR_RX_AND_TX = 3
};
-/* Clocks and BRGs */
-enum qe_clock {
- QE_CLK_NONE = 0,
- QE_BRG1, /* Baud Rate Generator 1 */
- QE_BRG2, /* Baud Rate Generator 2 */
- QE_BRG3, /* Baud Rate Generator 3 */
- QE_BRG4, /* Baud Rate Generator 4 */
- QE_BRG5, /* Baud Rate Generator 5 */
- QE_BRG6, /* Baud Rate Generator 6 */
- QE_BRG7, /* Baud Rate Generator 7 */
- QE_BRG8, /* Baud Rate Generator 8 */
- QE_BRG9, /* Baud Rate Generator 9 */
- QE_BRG10, /* Baud Rate Generator 10 */
- QE_BRG11, /* Baud Rate Generator 11 */
- QE_BRG12, /* Baud Rate Generator 12 */
- QE_BRG13, /* Baud Rate Generator 13 */
- QE_BRG14, /* Baud Rate Generator 14 */
- QE_BRG15, /* Baud Rate Generator 15 */
- QE_BRG16, /* Baud Rate Generator 16 */
- QE_CLK1, /* Clock 1 */
- QE_CLK2, /* Clock 2 */
- QE_CLK3, /* Clock 3 */
- QE_CLK4, /* Clock 4 */
- QE_CLK5, /* Clock 5 */
- QE_CLK6, /* Clock 6 */
- QE_CLK7, /* Clock 7 */
- QE_CLK8, /* Clock 8 */
- QE_CLK9, /* Clock 9 */
- QE_CLK10, /* Clock 10 */
- QE_CLK11, /* Clock 11 */
- QE_CLK12, /* Clock 12 */
- QE_CLK13, /* Clock 13 */
- QE_CLK14, /* Clock 14 */
- QE_CLK15, /* Clock 15 */
- QE_CLK16, /* Clock 16 */
- QE_CLK17, /* Clock 17 */
- QE_CLK18, /* Clock 18 */
- QE_CLK19, /* Clock 19 */
- QE_CLK20, /* Clock 20 */
- QE_CLK21, /* Clock 21 */
- QE_CLK22, /* Clock 22 */
- QE_CLK23, /* Clock 23 */
- QE_CLK24, /* Clock 24 */
- QE_CLK_DUMMY,
-};
-
/* QE CMXUCR Registers.
* There are two UCCs represented in each of the four CMXUCR registers.
* These values are for the UCC in the LSBs
diff --git a/include/asm-powerpc/reg.h b/include/asm-powerpc/reg.h
index e775ff1ca41..1f685047c6f 100644
--- a/include/asm-powerpc/reg.h
+++ b/include/asm-powerpc/reg.h
@@ -691,12 +691,6 @@
#define PV_BE 0x0070
#define PV_PA6T 0x0090
-/*
- * Number of entries in the SLB. If this ever changes we should handle
- * it with a use a cpu feature fixup.
- */
-#define SLB_NUM_ENTRIES 64
-
/* Macros for setting and retrieving special purpose registers */
#ifndef __ASSEMBLY__
#define mfmsr() ({unsigned long rval; \
diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h
index 8fdc2b47afb..d3e8dd0fc73 100644
--- a/include/asm-powerpc/reg_booke.h
+++ b/include/asm-powerpc/reg_booke.h
@@ -123,16 +123,23 @@
#define SPRN_SPEFSCR 0x200 /* SPE & Embedded FP Status & Control */
#define SPRN_BBEAR 0x201 /* Branch Buffer Entry Address Register */
#define SPRN_BBTAR 0x202 /* Branch Buffer Target Address Register */
+#define SPRN_ATB 0x20E /* Alternate Time Base */
+#define SPRN_ATBL 0x20E /* Alternate Time Base Lower */
+#define SPRN_ATBU 0x20F /* Alternate Time Base Upper */
#define SPRN_IVOR32 0x210 /* Interrupt Vector Offset Register 32 */
#define SPRN_IVOR33 0x211 /* Interrupt Vector Offset Register 33 */
#define SPRN_IVOR34 0x212 /* Interrupt Vector Offset Register 34 */
#define SPRN_IVOR35 0x213 /* Interrupt Vector Offset Register 35 */
+#define SPRN_IVOR36 0x214 /* Interrupt Vector Offset Register 36 */
+#define SPRN_IVOR37 0x215 /* Interrupt Vector Offset Register 37 */
#define SPRN_MCSRR0 0x23A /* Machine Check Save and Restore Register 0 */
#define SPRN_MCSRR1 0x23B /* Machine Check Save and Restore Register 1 */
#define SPRN_MCSR 0x23C /* Machine Check Status Register */
#define SPRN_MCAR 0x23D /* Machine Check Address Register */
#define SPRN_DSRR0 0x23E /* Debug Save and Restore Register 0 */
#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */
+#define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */
+#define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */
#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */
#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
@@ -140,15 +147,18 @@
#define SPRN_MAS4 0x274 /* MMU Assist Register 4 */
#define SPRN_MAS5 0x275 /* MMU Assist Register 5 */
#define SPRN_MAS6 0x276 /* MMU Assist Register 6 */
-#define SPRN_MAS7 0x3b0 /* MMU Assist Register 7 */
#define SPRN_PID1 0x279 /* Process ID Register 1 */
#define SPRN_PID2 0x27A /* Process ID Register 2 */
#define SPRN_TLB0CFG 0x2B0 /* TLB 0 Config Register */
#define SPRN_TLB1CFG 0x2B1 /* TLB 1 Config Register */
+#define SPRN_EPR 0x2BE /* External Proxy Register */
#define SPRN_CCR1 0x378 /* Core Configuration Register 1 */
#define SPRN_ZPR 0x3B0 /* Zone Protection Register (40x) */
+#define SPRN_MAS7 0x3B0 /* MMU Assist Register 7 */
#define SPRN_MMUCR 0x3B2 /* MMU Control Register */
#define SPRN_CCR0 0x3B3 /* Core Configuration Register 0 */
+#define SPRN_EPLC 0x3B3 /* External Process ID Load Context */
+#define SPRN_EPSC 0x3B4 /* External Process ID Store Context */
#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
#define SPRN_SLER 0x3BB /* Little-endian real mode */
@@ -159,6 +169,7 @@
#define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */
#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */
#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
+#define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */
#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
#define SPRN_SVR 0x3FF /* System Version Register */
@@ -293,7 +304,7 @@
#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
-#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
+#define ESR_PPR 0x04000000 /* Program Exception - Privileged */
#define ESR_PTR 0x02000000 /* Program Exception - Trap */
#define ESR_FP 0x01000000 /* Floating Point Operation */
#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
diff --git a/include/asm-powerpc/smu.h b/include/asm-powerpc/smu.h
index e49f644ca63..7ae2753da56 100644
--- a/include/asm-powerpc/smu.h
+++ b/include/asm-powerpc/smu.h
@@ -22,7 +22,7 @@
* Partition info commands
*
* These commands are used to retrieve the sdb-partition-XX datas from
- * the SMU. The lenght is always 2. First byte is the subcommand code
+ * the SMU. The length is always 2. First byte is the subcommand code
* and second byte is the partition ID.
*
* The reply is 6 bytes:
@@ -173,12 +173,12 @@
* Power supply control
*
* The "sub" command is an ASCII string in the data, the
- * data lenght is that of the string.
+ * data length is that of the string.
*
* The VSLEW command can be used to get or set the voltage slewing.
- * - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ * - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
* reply at data offset 6, 7 and 8.
- * - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ * - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
* used to set the voltage slewing point. The SMU replies with "DONE"
* I yet have to figure out their exact meaning of those 3 bytes in
* both cases. They seem to be:
@@ -201,20 +201,90 @@
*/
#define SMU_CMD_READ_ADC 0xd8
+
/* Misc commands
*
* This command seem to be a grab bag of various things
+ *
+ * Parameters:
+ * 1: subcommand
*/
#define SMU_CMD_MISC_df_COMMAND 0xdf
-#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02 /* i: 1 byte */
+
+/*
+ * Sets "system ready" status
+ *
+ * I did not yet understand how it exactly works or what it does.
+ *
+ * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used
+ * the same codebase for all OF versions. On PowerBooks, this command would
+ * enable the backlight. For the G5s, it only activates the front LED. However,
+ * don't take this for granted.
+ *
+ * Parameters:
+ * 2: status [0x00, 0x01 or 0x02]
+ */
+#define SMU_CMD_MISC_df_SET_DISPLAY_LIT 0x02
+
+/*
+ * Sets mode of power switch.
+ *
+ * What this actually does is not yet known. Maybe it enables some interrupt.
+ *
+ * Parameters:
+ * 2: enable power switch? [0x00 or 0x01]
+ * 3 (optional): enable nmi? [0x00 or 0x01]
+ *
+ * Returns:
+ * If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
+ * NMI is enabled. Otherwise unknown.
+ */
#define SMU_CMD_MISC_df_NMI_OPTION 0x04
+/* Sets LED dimm offset.
+ *
+ * The front LED dimms itself during sleep. Its brightness (or, well, the PWM
+ * frequency) depends on current time. Therefore, the SMU needs to know the
+ * timezone.
+ *
+ * Parameters:
+ * 2-8: unknown (BCD coding)
+ */
+#define SMU_CMD_MISC_df_DIMM_OFFSET 0x99
+
+
/*
* Version info commands
*
- * I haven't quite tried to figure out how these work
+ * Parameters:
+ * 1 (optional): Specifies version part to retrieve
+ *
+ * Returns:
+ * Version value
*/
#define SMU_CMD_VERSION_COMMAND 0xea
+#define SMU_VERSION_RUNNING 0x00
+#define SMU_VERSION_BASE 0x01
+#define SMU_VERSION_UPDATE 0x02
+
+
+/*
+ * Switches
+ *
+ * These are switches whose status seems to be known to the SMU.
+ *
+ * Parameters:
+ * none
+ *
+ * Result:
+ * Switch bits (ORed, see below)
+ */
+#define SMU_CMD_SWITCHES 0xdc
+
+/* Switches bits */
+#define SMU_SWITCH_CASE_CLOSED 0x01
+#define SMU_SWITCH_AC_POWER 0x04
+#define SMU_SWITCH_POWER_SWITCH 0x08
/*
@@ -243,10 +313,64 @@
*/
#define SMU_CMD_MISC_ee_COMMAND 0xee
#define SMU_CMD_MISC_ee_GET_DATABLOCK_REC 0x02
-#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */
+
+/* Retrieves currently used watts.
+ *
+ * Parameters:
+ * 1: 0x03 (Meaning unknown)
+ */
+#define SMU_CMD_MISC_ee_GET_WATTS 0x03
+
+#define SMU_CMD_MISC_ee_LEDS_CTRL 0x04 /* i: 00 (00,01) [00] */
#define SMU_CMD_MISC_ee_GET_DATA 0x05 /* i: 00 , o: ?? */
+/*
+ * Power related commands
+ *
+ * Parameters:
+ * 1: subcommand
+ */
+#define SMU_CMD_POWER_EVENTS_COMMAND 0x8f
+
+/* SMU_POWER_EVENTS subcommands */
+enum {
+ SMU_PWR_GET_POWERUP_EVENTS = 0x00,
+ SMU_PWR_SET_POWERUP_EVENTS = 0x01,
+ SMU_PWR_CLR_POWERUP_EVENTS = 0x02,
+ SMU_PWR_GET_WAKEUP_EVENTS = 0x03,
+ SMU_PWR_SET_WAKEUP_EVENTS = 0x04,
+ SMU_PWR_CLR_WAKEUP_EVENTS = 0x05,
+
+ /*
+ * Get last shutdown cause
+ *
+ * Returns:
+ * 1 byte (signed char): Last shutdown cause. Exact meaning unknown.
+ */
+ SMU_PWR_LAST_SHUTDOWN_CAUSE = 0x07,
+
+ /*
+ * Sets or gets server ID. Meaning or use is unknown.
+ *
+ * Parameters:
+ * 2 (optional): Set server ID (1 byte)
+ *
+ * Returns:
+ * 1 byte (server ID?)
+ */
+ SMU_PWR_SERVER_ID = 0x08,
+};
+
+/* Power events wakeup bits */
+enum {
+ SMU_PWR_WAKEUP_KEY = 0x01, /* Wake on key press */
+ SMU_PWR_WAKEUP_AC_INSERT = 0x02, /* Wake on AC adapter plug */
+ SMU_PWR_WAKEUP_AC_CHANGE = 0x04,
+ SMU_PWR_WAKEUP_LID_OPEN = 0x08,
+ SMU_PWR_WAKEUP_RING = 0x10,
+};
+
/*
* - Kernel side interface -
@@ -564,13 +688,13 @@ struct smu_user_cmd_hdr
__u8 cmd; /* SMU command byte */
__u8 pad[3]; /* padding */
- __u32 data_len; /* Lenght of data following */
+ __u32 data_len; /* Length of data following */
};
struct smu_user_reply_hdr
{
__u32 status; /* Command status */
- __u32 reply_len; /* Lenght of data follwing */
+ __u32 reply_len; /* Length of data follwing */
};
#endif /* _SMU_H */
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index b1accce77bb..5ca30e2e263 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -104,6 +104,7 @@
struct spu_context;
struct spu_runqueue;
+struct spu_lscsa;
struct device_node;
enum spu_utilization_state {
@@ -145,7 +146,6 @@ struct spu {
void (* ibox_callback)(struct spu *spu);
void (* stop_callback)(struct spu *spu);
void (* mfc_callback)(struct spu *spu);
- void (* dma_callback)(struct spu *spu, int type);
char irq_c0[8];
char irq_c1[8];
@@ -196,10 +196,11 @@ struct cbe_spu_info {
extern struct cbe_spu_info cbe_spu_info[];
void spu_init_channels(struct spu *spu);
-int spu_irq_class_0_bottom(struct spu *spu);
-int spu_irq_class_1_bottom(struct spu *spu);
void spu_irq_setaffinity(struct spu *spu, int cpu);
+void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
+ void *code, int code_size);
+
#ifdef CONFIG_KEXEC
void crash_register_spus(struct list_head *list);
#else
@@ -210,6 +211,7 @@ static inline void crash_register_spus(struct list_head *list)
extern void spu_invalidate_slbs(struct spu *spu);
extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm);
+int spu_64k_pages_available(void);
/* Calls from the memory management to the SPU */
struct mm_struct;
@@ -278,6 +280,8 @@ void spu_remove_sysdev_attr(struct sysdev_attribute *attr);
int spu_add_sysdev_attr_group(struct attribute_group *attrs);
void spu_remove_sysdev_attr_group(struct attribute_group *attrs);
+int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
+ unsigned long dsisr, unsigned *flt);
/*
* Notifier blocks:
@@ -299,7 +303,7 @@ int spu_switch_event_register(struct notifier_block * n);
int spu_switch_event_unregister(struct notifier_block * n);
/*
- * This defines the Local Store, Problem Area and Privlege Area of an SPU.
+ * This defines the Local Store, Problem Area and Privilege Area of an SPU.
*/
union mfc_tag_size_class_cmd {
@@ -520,8 +524,24 @@ struct spu_priv1 {
#define CLASS2_ENABLE_SPU_STOP_INTR 0x2L
#define CLASS2_ENABLE_SPU_HALT_INTR 0x4L
#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L
+#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR 0x10L
u8 pad_0x118_0x140[0x28]; /* 0x118 */
u64 int_stat_RW[3]; /* 0x140 */
+#define CLASS0_DMA_ALIGNMENT_INTR 0x1L
+#define CLASS0_INVALID_DMA_COMMAND_INTR 0x2L
+#define CLASS0_SPU_ERROR_INTR 0x4L
+#define CLASS0_INTR_MASK 0x7L
+#define CLASS1_SEGMENT_FAULT_INTR 0x1L
+#define CLASS1_STORAGE_FAULT_INTR 0x2L
+#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR 0x4L
+#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR 0x8L
+#define CLASS1_INTR_MASK 0xfL
+#define CLASS2_MAILBOX_INTR 0x1L
+#define CLASS2_SPU_STOP_INTR 0x2L
+#define CLASS2_SPU_HALT_INTR 0x4L
+#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR 0x8L
+#define CLASS2_MAILBOX_THRESHOLD_INTR 0x10L
+#define CLASS2_INTR_MASK 0x1fL
u8 pad_0x158_0x180[0x28]; /* 0x158 */
u64 int_route_RW; /* 0x180 */
diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h
index e87794d5d4e..0ab6bff8607 100644
--- a/include/asm-powerpc/spu_csa.h
+++ b/include/asm-powerpc/spu_csa.h
@@ -194,7 +194,7 @@ struct spu_priv1_collapsed {
};
/*
- * struct spu_priv2_collapsed - condensed priviliged 2 area, w/o pads.
+ * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads.
*/
struct spu_priv2_collapsed {
u64 slb_index_W;
@@ -254,20 +254,11 @@ struct spu_state {
u64 spu_chnldata_RW[32];
u32 spu_mailbox_data[4];
u32 pu_mailbox_data[1];
- u64 dar, dsisr;
+ u64 dar, dsisr, class_0_pending;
unsigned long suspend_time;
spinlock_t register_lock;
};
-extern int spu_init_csa(struct spu_state *csa);
-extern void spu_fini_csa(struct spu_state *csa);
-extern int spu_save(struct spu_state *prev, struct spu *spu);
-extern int spu_restore(struct spu_state *new, struct spu *spu);
-extern int spu_switch(struct spu_state *prev, struct spu_state *new,
- struct spu *spu);
-extern int spu_alloc_lscsa(struct spu_state *csa);
-extern void spu_free_lscsa(struct spu_state *csa);
-
#endif /* !__SPU__ */
#endif /* __KERNEL__ */
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-powerpc/spu_priv1.h b/include/asm-powerpc/spu_priv1.h
index 0f37c7c9082..25020a34ce7 100644
--- a/include/asm-powerpc/spu_priv1.h
+++ b/include/asm-powerpc/spu_priv1.h
@@ -24,6 +24,7 @@
#include <linux/types.h>
struct spu;
+struct spu_context;
/* access to priv1 registers */
@@ -178,6 +179,8 @@ struct spu_management_ops {
int (*enumerate_spus)(int (*fn)(void *data));
int (*create_spu)(struct spu *spu, void *data);
int (*destroy_spu)(struct spu *spu);
+ void (*enable_spu)(struct spu_context *ctx);
+ void (*disable_spu)(struct spu_context *ctx);
int (*init_affinity)(void);
};
@@ -207,6 +210,18 @@ spu_init_affinity (void)
return spu_management_ops->init_affinity();
}
+static inline void
+spu_enable_spu (struct spu_context *ctx)
+{
+ spu_management_ops->enable_spu(ctx);
+}
+
+static inline void
+spu_disable_spu (struct spu_context *ctx)
+{
+ spu_management_ops->disable_spu(ctx);
+}
+
/*
* The declarations folowing are put here for convenience
* and only intended to be used by the platform setup code.
diff --git a/include/asm-ppc/8xx_immap.h b/include/asm-ppc/8xx_immap.h
index 1311cefdfd3..4b0e1520600 100644
--- a/include/asm-ppc/8xx_immap.h
+++ b/include/asm-ppc/8xx_immap.h
@@ -123,7 +123,7 @@ typedef struct mem_ctlr {
#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */
#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/
#define OR_BI 0x00000100 /* Burst inhibit */
-#define OR_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */
+#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */
#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */
#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */
#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */
diff --git a/include/asm-ppc/commproc.h b/include/asm-ppc/commproc.h
index 397248705e0..462abb185f0 100644
--- a/include/asm-ppc/commproc.h
+++ b/include/asm-ppc/commproc.h
@@ -681,7 +681,7 @@ typedef struct risc_timer_pram {
#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
-#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
+#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h
index 82948ed2744..4cad45a055d 100644
--- a/include/asm-ppc/reg_booke.h
+++ b/include/asm-ppc/reg_booke.h
@@ -283,7 +283,7 @@
#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
-#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
+#define ESR_PPR 0x04000000 /* Program Exception - Privileged */
#define ESR_PTR 0x02000000 /* Program Exception - Trap */
#define ESR_FP 0x01000000 /* Floating Point Operation */
#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
diff --git a/include/linux/of.h b/include/linux/of.h
index 5c39b9270ff..c65af7bd1e9 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -46,6 +46,10 @@ extern struct device_node *of_find_node_by_phandle(phandle handle);
extern struct device_node *of_get_parent(const struct device_node *node);
extern struct device_node *of_get_next_child(const struct device_node *node,
struct device_node *prev);
+#define for_each_child_of_node(parent, child) \
+ for (child = of_get_next_child(parent, NULL); child != NULL; \
+ child = of_get_next_child(parent, child))
+
extern struct property *of_find_property(const struct device_node *np,
const char *name,
int *lenp);
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
index b7824c21535..4c5f65392d3 100644
--- a/include/linux/pmu.h
+++ b/include/linux/pmu.h
@@ -159,41 +159,7 @@ extern void pmu_unlock(void);
extern int pmu_present(void);
extern int pmu_get_model(void);
-#ifdef CONFIG_PM
-/*
- * Stuff for putting the powerbook to sleep and waking it again.
- *
- */
-#include <linux/list.h>
-
-struct pmu_sleep_notifier
-{
- void (*notifier_call)(struct pmu_sleep_notifier *self, int when);
- int priority;
- struct list_head list;
-};
-
-/* Code values for calling sleep/wakeup handlers
- */
-#define PBOOK_SLEEP_REQUEST 1
-#define PBOOK_SLEEP_NOW 2
-#define PBOOK_WAKE 3
-
-/* priority levels in notifiers */
-#define SLEEP_LEVEL_VIDEO 100 /* Video driver (first wake) */
-#define SLEEP_LEVEL_MEDIABAY 90 /* Media bay driver */
-#define SLEEP_LEVEL_BLOCK 80 /* IDE, SCSI */
-#define SLEEP_LEVEL_NET 70 /* bmac, gmac */
-#define SLEEP_LEVEL_MISC 60 /* Anything else */
-#define SLEEP_LEVEL_USERLAND 55 /* Reserved for apm_emu */
-#define SLEEP_LEVEL_ADB 50 /* ADB (async) */
-#define SLEEP_LEVEL_SOUND 40 /* Sound driver (blocking) */
-
-/* special register notifier functions */
-int pmu_register_sleep_notifier(struct pmu_sleep_notifier* notifier);
-int pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* notifier);
-
-#endif /* CONFIG_PM */
+extern void pmu_backlight_set_sleep(int sleep);
#define PMU_MAX_BATTERIES 2