aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/asm-arm/arch-ixp4xx/debug-macro.S2
-rw-r--r--include/asm-arm/ide.h2
-rw-r--r--include/asm-arm/io.h2
-rw-r--r--include/asm-arm/mach/time.h2
-rw-r--r--include/asm-i386/tlbflush.h12
-rw-r--r--include/asm-i386/unistd.h4
-rw-r--r--include/asm-ia64/unistd.h2
-rw-r--r--include/asm-ppc/open_pic.h6
-rw-r--r--include/asm-ppc/unistd.h4
-rw-r--r--include/asm-x86_64/tlbflush.h12
-rw-r--r--include/asm-x86_64/unistd.h6
-rw-r--r--include/linux/bio.h14
-rw-r--r--include/linux/blkdev.h25
-rw-r--r--include/linux/cciss_ioctl.h1
-rw-r--r--include/linux/elevator.h8
-rw-r--r--include/linux/fs.h19
-rw-r--r--include/linux/init_task.h2
-rw-r--r--include/linux/input.h4
-rw-r--r--include/linux/ioprio.h88
-rw-r--r--include/linux/joystick.h33
-rw-r--r--include/linux/libps2.h1
-rw-r--r--include/linux/pci_ids.h5
-rw-r--r--include/linux/pmu.h6
-rw-r--r--include/linux/sched.h6
-rw-r--r--include/linux/seccomp.h10
-rw-r--r--include/linux/serial_8250.h1
-rw-r--r--include/linux/serio.h6
-rw-r--r--include/linux/writeback.h6
-rw-r--r--include/net/ieee80211.h882
29 files changed, 1128 insertions, 43 deletions
diff --git a/include/asm-arm/arch-ixp4xx/debug-macro.S b/include/asm-arm/arch-ixp4xx/debug-macro.S
index 45a6c6cc29d..2e23651e217 100644
--- a/include/asm-arm/arch-ixp4xx/debug-macro.S
+++ b/include/asm-arm/arch-ixp4xx/debug-macro.S
@@ -14,8 +14,8 @@
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0xc8000000
- orrne \rx, \rx, #0x00b00000
movne \rx, #0xff000000
+ orrne \rx, \rx, #0x00b00000
add \rx,\rx,#3 @ Uart regs are at off set of 3 if
@ byte writes used - Big Endian.
.endm
diff --git a/include/asm-arm/ide.h b/include/asm-arm/ide.h
index 2114acb3d23..4f68c8a5a19 100644
--- a/include/asm-arm/ide.h
+++ b/include/asm-arm/ide.h
@@ -5,7 +5,7 @@
*/
/*
- * This file contains the i386 architecture specific IDE code.
+ * This file contains the ARM architecture specific IDE code.
*/
#ifndef __ASMARM_IDE_H
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index cc4b5f5dbfc..cfa71a0dffb 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -82,7 +82,7 @@ extern void __readwrite_bug(const char *fn);
* only. Their primary purpose is to access PCI and ISA peripherals.
*
* Note that for a big endian machine, this implies that the following
- * big endian mode connectivity is in place, as described by numerious
+ * big endian mode connectivity is in place, as described by numerous
* ARM documents:
*
* PCI: D0-D7 D8-D15 D16-D23 D24-D31
diff --git a/include/asm-arm/mach/time.h b/include/asm-arm/mach/time.h
index 047980ad18d..2cf279a4401 100644
--- a/include/asm-arm/mach/time.h
+++ b/include/asm-arm/mach/time.h
@@ -60,6 +60,8 @@ struct dyn_tick_timer {
};
void timer_dyn_reprogram(void);
+#else
+#define timer_dyn_reprogram() do { } while (0)
#endif
extern struct sys_timer *system_timer;
diff --git a/include/asm-i386/tlbflush.h b/include/asm-i386/tlbflush.h
index f22fab0cea2..ab216e1370e 100644
--- a/include/asm-i386/tlbflush.h
+++ b/include/asm-i386/tlbflush.h
@@ -22,16 +22,18 @@
*/
#define __flush_tlb_global() \
do { \
- unsigned int tmpreg; \
+ unsigned int tmpreg, cr4, cr4_orig; \
\
__asm__ __volatile__( \
- "movl %1, %%cr4; # turn off PGE \n" \
+ "movl %%cr4, %2; # turn off PGE \n" \
+ "movl %2, %1; \n" \
+ "andl %3, %1; \n" \
+ "movl %1, %%cr4; \n" \
"movl %%cr3, %0; \n" \
"movl %0, %%cr3; # flush TLB \n" \
"movl %2, %%cr4; # turn PGE back on \n" \
- : "=&r" (tmpreg) \
- : "r" (mmu_cr4_features & ~X86_CR4_PGE), \
- "r" (mmu_cr4_features) \
+ : "=&r" (tmpreg), "=&r" (cr4), "=&r" (cr4_orig) \
+ : "i" (~X86_CR4_PGE) \
: "memory"); \
} while (0)
diff --git a/include/asm-i386/unistd.h b/include/asm-i386/unistd.h
index 176413fb9ae..e25e4c71a87 100644
--- a/include/asm-i386/unistd.h
+++ b/include/asm-i386/unistd.h
@@ -294,8 +294,10 @@
#define __NR_add_key 286
#define __NR_request_key 287
#define __NR_keyctl 288
+#define __NR_ioprio_set 289
+#define __NR_ioprio_get 290
-#define NR_syscalls 289
+#define NR_syscalls 291
/*
* user-visible error numbers are in the range -1 - -128: see
diff --git a/include/asm-ia64/unistd.h b/include/asm-ia64/unistd.h
index f7f43ec2483..517f1649ee6 100644
--- a/include/asm-ia64/unistd.h
+++ b/include/asm-ia64/unistd.h
@@ -263,6 +263,8 @@
#define __NR_add_key 1271
#define __NR_request_key 1272
#define __NR_keyctl 1273
+#define __NR_ioprio_set 1274
+#define __NR_ioprio_get 1275
#define __NR_set_zone_reclaim 1276
#ifdef __KERNEL__
diff --git a/include/asm-ppc/open_pic.h b/include/asm-ppc/open_pic.h
index dbe85331974..7848aa610c0 100644
--- a/include/asm-ppc/open_pic.h
+++ b/include/asm-ppc/open_pic.h
@@ -25,6 +25,11 @@
#define OPENPIC_VEC_IPI 118 /* and up */
#define OPENPIC_VEC_SPURIOUS 255
+/* Priorities */
+#define OPENPIC_PRIORITY_IPI_BASE 10
+#define OPENPIC_PRIORITY_DEFAULT 4
+#define OPENPIC_PRIORITY_NMI 9
+
/* OpenPIC IRQ controller structure */
extern struct hw_interrupt_type open_pic;
@@ -42,6 +47,7 @@ extern int epic_serial_mode;
extern void openpic_set_sources(int first_irq, int num_irqs, void __iomem *isr);
extern void openpic_init(int linux_irq_offset);
extern void openpic_init_nmi_irq(u_int irq);
+extern void openpic_set_irq_priority(u_int irq, u_int pri);
extern void openpic_hookup_cascade(u_int irq, char *name,
int (*cascade_fn)(struct pt_regs *));
extern u_int openpic_irq(void);
diff --git a/include/asm-ppc/unistd.h b/include/asm-ppc/unistd.h
index cc51e5c9acc..e8b79220b29 100644
--- a/include/asm-ppc/unistd.h
+++ b/include/asm-ppc/unistd.h
@@ -277,8 +277,10 @@
#define __NR_request_key 270
#define __NR_keyctl 271
#define __NR_waitid 272
+#define __NR_ioprio_set 273
+#define __NR_ioprio_get 274
-#define __NR_syscalls 273
+#define __NR_syscalls 275
#define __NR(n) #n
diff --git a/include/asm-x86_64/tlbflush.h b/include/asm-x86_64/tlbflush.h
index 2e811ac262a..06174238252 100644
--- a/include/asm-x86_64/tlbflush.h
+++ b/include/asm-x86_64/tlbflush.h
@@ -22,16 +22,18 @@
*/
#define __flush_tlb_global() \
do { \
- unsigned long tmpreg; \
+ unsigned long tmpreg, cr4, cr4_orig; \
\
__asm__ __volatile__( \
- "movq %1, %%cr4; # turn off PGE \n" \
+ "movq %%cr4, %2; # turn off PGE \n" \
+ "movq %2, %1; \n" \
+ "andq %3, %1; \n" \
+ "movq %1, %%cr4; \n" \
"movq %%cr3, %0; # flush TLB \n" \
"movq %0, %%cr3; \n" \
"movq %2, %%cr4; # turn PGE back on \n" \
- : "=&r" (tmpreg) \
- : "r" (mmu_cr4_features & ~X86_CR4_PGE), \
- "r" (mmu_cr4_features) \
+ : "=&r" (tmpreg), "=&r" (cr4), "=&r" (cr4_orig) \
+ : "i" (~X86_CR4_PGE) \
: "memory"); \
} while (0)
diff --git a/include/asm-x86_64/unistd.h b/include/asm-x86_64/unistd.h
index d767adcbf0f..6560439a83e 100644
--- a/include/asm-x86_64/unistd.h
+++ b/include/asm-x86_64/unistd.h
@@ -561,8 +561,12 @@ __SYSCALL(__NR_add_key, sys_add_key)
__SYSCALL(__NR_request_key, sys_request_key)
#define __NR_keyctl 250
__SYSCALL(__NR_keyctl, sys_keyctl)
+#define __NR_ioprio_set 251
+__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
+#define __NR_ioprio_get 252
+__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
-#define __NR_syscall_max __NR_keyctl
+#define __NR_syscall_max __NR_ioprio_get
#ifndef __NO_STUBS
/* user-visible error numbers are in the range -1 - -4095 */
diff --git a/include/linux/bio.h b/include/linux/bio.h
index 038022763f0..36ef29fa0d8 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -22,6 +22,7 @@
#include <linux/highmem.h>
#include <linux/mempool.h>
+#include <linux/ioprio.h>
/* Platforms may set this to teach the BIO layer about IOMMU hardware. */
#include <asm/io.h>
@@ -150,6 +151,19 @@ struct bio {
#define BIO_RW_SYNC 4
/*
+ * upper 16 bits of bi_rw define the io priority of this bio
+ */
+#define BIO_PRIO_SHIFT (8 * sizeof(unsigned long) - IOPRIO_BITS)
+#define bio_prio(bio) ((bio)->bi_rw >> BIO_PRIO_SHIFT)
+#define bio_prio_valid(bio) ioprio_valid(bio_prio(bio))
+
+#define bio_set_prio(bio, prio) do { \
+ WARN_ON(prio >= (1 << IOPRIO_BITS)); \
+ (bio)->bi_rw &= ((1UL << BIO_PRIO_SHIFT) - 1); \
+ (bio)->bi_rw |= ((unsigned long) (prio) << BIO_PRIO_SHIFT); \
+} while (0)
+
+/*
* various member access, note that bio_data should of course not be used
* on highmem page vectors
*/
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index b54a0348a89..21a8674cd14 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -54,16 +54,23 @@ struct as_io_context {
struct cfq_queue;
struct cfq_io_context {
- void (*dtor)(struct cfq_io_context *);
- void (*exit)(struct cfq_io_context *);
-
- struct io_context *ioc;
-
/*
* circular list of cfq_io_contexts belonging to a process io context
*/
struct list_head list;
struct cfq_queue *cfqq;
+ void *key;
+
+ struct io_context *ioc;
+
+ unsigned long last_end_request;
+ unsigned long last_queue;
+ unsigned long ttime_total;
+ unsigned long ttime_samples;
+ unsigned long ttime_mean;
+
+ void (*dtor)(struct cfq_io_context *);
+ void (*exit)(struct cfq_io_context *);
};
/*
@@ -73,7 +80,9 @@ struct cfq_io_context {
*/
struct io_context {
atomic_t refcount;
- pid_t pid;
+ struct task_struct *task;
+
+ int (*set_ioprio)(struct io_context *, unsigned int);
/*
* For request batching
@@ -81,8 +90,6 @@ struct io_context {
unsigned long last_waited; /* Time last woken after wait for request */
int nr_batch_requests; /* Number of requests left in the batch */
- spinlock_t lock;
-
struct as_io_context *aic;
struct cfq_io_context *cic;
};
@@ -134,6 +141,8 @@ struct request {
void *elevator_private;
+ unsigned short ioprio;
+
int rq_status; /* should split this into a few status bits */
struct gendisk *rq_disk;
int errors;
diff --git a/include/linux/cciss_ioctl.h b/include/linux/cciss_ioctl.h
index ee0c6e8995d..424d5e622b4 100644
--- a/include/linux/cciss_ioctl.h
+++ b/include/linux/cciss_ioctl.h
@@ -10,6 +10,7 @@
typedef struct _cciss_pci_info_struct
{
unsigned char bus;
+ unsigned short domain;
unsigned char dev_fn;
__u32 board_id;
} cciss_pci_info_struct;
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index ee54f81faad..ea6bbc2d740 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -16,9 +16,9 @@ typedef void (elevator_remove_req_fn) (request_queue_t *, struct request *);
typedef void (elevator_requeue_req_fn) (request_queue_t *, struct request *);
typedef struct request *(elevator_request_list_fn) (request_queue_t *, struct request *);
typedef void (elevator_completed_req_fn) (request_queue_t *, struct request *);
-typedef int (elevator_may_queue_fn) (request_queue_t *, int);
+typedef int (elevator_may_queue_fn) (request_queue_t *, int, struct bio *);
-typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, int);
+typedef int (elevator_set_req_fn) (request_queue_t *, struct request *, struct bio *, int);
typedef void (elevator_put_req_fn) (request_queue_t *, struct request *);
typedef void (elevator_deactivate_req_fn) (request_queue_t *, struct request *);
@@ -96,9 +96,9 @@ extern struct request *elv_former_request(request_queue_t *, struct request *);
extern struct request *elv_latter_request(request_queue_t *, struct request *);
extern int elv_register_queue(request_queue_t *q);
extern void elv_unregister_queue(request_queue_t *q);
-extern int elv_may_queue(request_queue_t *, int);
+extern int elv_may_queue(request_queue_t *, int, struct bio *);
extern void elv_completed_request(request_queue_t *, struct request *);
-extern int elv_set_request(request_queue_t *, struct request *, int);
+extern int elv_set_request(request_queue_t *, struct request *, struct bio *, int);
extern void elv_put_request(request_queue_t *, struct request *);
/*
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 3ae8e37bdfc..047bde30836 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -213,6 +213,7 @@ extern int dir_notify_enable;
#include <linux/radix-tree.h>
#include <linux/prio_tree.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <asm/atomic.h>
#include <asm/semaphore.h>
@@ -822,16 +823,34 @@ enum {
#define vfs_check_frozen(sb, level) \
wait_event((sb)->s_wait_unfrozen, ((sb)->s_frozen < (level)))
+static inline void get_fs_excl(void)
+{
+ atomic_inc(&current->fs_excl);
+}
+
+static inline void put_fs_excl(void)
+{
+ atomic_dec(&current->fs_excl);
+}
+
+static inline int has_fs_excl(void)
+{
+ return atomic_read(&current->fs_excl);
+}
+
+
/*
* Superblock locking.
*/
static inline void lock_super(struct super_block * sb)
{
+ get_fs_excl();
down(&sb->s_lock);
}
static inline void unlock_super(struct super_block * sb)
{
+ put_fs_excl();
up(&sb->s_lock);
}
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 03206a425d7..c727c195a91 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -81,6 +81,7 @@ extern struct group_info init_groups;
.mm = NULL, \
.active_mm = &init_mm, \
.run_list = LIST_HEAD_INIT(tsk.run_list), \
+ .ioprio = 0, \
.time_slice = HZ, \
.tasks = LIST_HEAD_INIT(tsk.tasks), \
.ptrace_children= LIST_HEAD_INIT(tsk.ptrace_children), \
@@ -110,6 +111,7 @@ extern struct group_info init_groups;
.proc_lock = SPIN_LOCK_UNLOCKED, \
.journal_info = NULL, \
.cpu_timers = INIT_CPU_TIMERS(tsk.cpu_timers), \
+ .fs_excl = ATOMIC_INIT(0), \
}
diff --git a/include/linux/input.h b/include/linux/input.h
index 9d9598ed760..b9cc0ac71f4 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -859,6 +859,10 @@ struct input_dev {
int (*erase_effect)(struct input_dev *dev, int effect_id);
struct input_handle *grab;
+
+ struct semaphore sem; /* serializes open and close operations */
+ unsigned int users;
+
struct device *dev;
struct list_head h_list;
diff --git a/include/linux/ioprio.h b/include/linux/ioprio.h
new file mode 100644
index 00000000000..8a453a0b5e4
--- /dev/null
+++ b/include/linux/ioprio.h
@@ -0,0 +1,88 @@
+#ifndef IOPRIO_H
+#define IOPRIO_H
+
+#include <linux/sched.h>
+
+/*
+ * Gives us 8 prio classes with 13-bits of data for each class
+ */
+#define IOPRIO_BITS (16)
+#define IOPRIO_CLASS_SHIFT (13)
+#define IOPRIO_PRIO_MASK ((1UL << IOPRIO_CLASS_SHIFT) - 1)
+
+#define IOPRIO_PRIO_CLASS(mask) ((mask) >> IOPRIO_CLASS_SHIFT)
+#define IOPRIO_PRIO_DATA(mask) ((mask) & IOPRIO_PRIO_MASK)
+#define IOPRIO_PRIO_VALUE(class, data) (((class) << IOPRIO_CLASS_SHIFT) | data)
+
+#define ioprio_valid(mask) (IOPRIO_PRIO_CLASS((mask)) != IOPRIO_CLASS_NONE)
+
+/*
+ * These are the io priority groups as implemented by CFQ. RT is the realtime
+ * class, it always gets premium service. BE is the best-effort scheduling
+ * class, the default for any process. IDLE is the idle scheduling class, it
+ * is only served when no one else is using the disk.
+ */
+enum {
+ IOPRIO_CLASS_NONE,
+ IOPRIO_CLASS_RT,
+ IOPRIO_CLASS_BE,
+ IOPRIO_CLASS_IDLE,
+};
+
+/*
+ * 8 best effort priority levels are supported
+ */
+#define IOPRIO_BE_NR (8)
+
+asmlinkage int sys_ioprio_set(int, int, int);
+asmlinkage int sys_ioprio_get(int, int);
+
+enum {
+ IOPRIO_WHO_PROCESS = 1,
+ IOPRIO_WHO_PGRP,
+ IOPRIO_WHO_USER,
+};
+
+/*
+ * if process has set io priority explicitly, use that. if not, convert
+ * the cpu scheduler nice value to an io priority
+ */
+#define IOPRIO_NORM (4)
+static inline int task_ioprio(struct task_struct *task)
+{
+ WARN_ON(!ioprio_valid(task->ioprio));
+ return IOPRIO_PRIO_DATA(task->ioprio);
+}
+
+static inline int task_nice_ioprio(struct task_struct *task)
+{
+ return (task_nice(task) + 20) / 5;
+}
+
+/*
+ * For inheritance, return the highest of the two given priorities
+ */
+static inline int ioprio_best(unsigned short aprio, unsigned short bprio)
+{
+ unsigned short aclass = IOPRIO_PRIO_CLASS(aprio);
+ unsigned short bclass = IOPRIO_PRIO_CLASS(bprio);
+
+ if (!ioprio_valid(aprio))
+ return bprio;
+ if (!ioprio_valid(bprio))
+ return aprio;
+
+ if (aclass == IOPRIO_CLASS_NONE)
+ aclass = IOPRIO_CLASS_BE;
+ if (bclass == IOPRIO_CLASS_NONE)
+ bclass = IOPRIO_CLASS_BE;
+
+ if (aclass == bclass)
+ return min(aprio, bprio);
+ if (aclass > bclass)
+ return bprio;
+ else
+ return aprio;
+}
+
+#endif
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
index b7e0ab622cd..06b9af77eb7 100644
--- a/include/linux/joystick.h
+++ b/include/linux/joystick.h
@@ -111,18 +111,35 @@ struct js_corr {
#define JS_SET_ALL 8
struct JS_DATA_TYPE {
- int buttons;
- int x;
- int y;
+ __s32 buttons;
+ __s32 x;
+ __s32 y;
};
-struct JS_DATA_SAVE_TYPE {
- int JS_TIMEOUT;
- int BUSY;
- long JS_EXPIRETIME;
- long JS_TIMELIMIT;
+struct JS_DATA_SAVE_TYPE_32 {
+ __s32 JS_TIMEOUT;
+ __s32 BUSY;
+ __s32 JS_EXPIRETIME;
+ __s32 JS_TIMELIMIT;
struct JS_DATA_TYPE JS_SAVE;
struct JS_DATA_TYPE JS_CORR;
};
+struct JS_DATA_SAVE_TYPE_64 {
+ __s32 JS_TIMEOUT;
+ __s32 BUSY;
+ __s64 JS_EXPIRETIME;
+ __s64 JS_TIMELIMIT;
+ struct JS_DATA_TYPE JS_SAVE;
+ struct JS_DATA_TYPE JS_CORR;
+};
+
+#if BITS_PER_LONG == 64
+#define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_64
+#elif BITS_PER_LONG == 32
+#define JS_DATA_SAVE_TYPE JS_DATA_SAVE_TYPE_32
+#else
+#error Unexpected BITS_PER_LONG
+#endif
+
#endif /* _LINUX_JOYSTICK_H */
diff --git a/include/linux/libps2.h b/include/linux/libps2.h
index 923bdbc6d9e..a710bddda4e 100644
--- a/include/linux/libps2.h
+++ b/include/linux/libps2.h
@@ -41,6 +41,7 @@ struct ps2dev {
void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout);
+void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout);
int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
int ps2_schedule_command(struct ps2dev *ps2dev, unsigned char *param, int command);
int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index bf608808a60..a3961e1d518 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -712,8 +712,9 @@
#define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290
#define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301
#define PCI_DEVICE_ID_HP_CISSA 0x3220
-#define PCI_DEVICE_ID_HP_CISSB 0x3230
+#define PCI_DEVICE_ID_HP_CISSB 0x3222
#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031
+#define PCI_DEVICE_ID_HP_CISSC 0x3230
#define PCI_VENDOR_ID_PCTECH 0x1042
#define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000
@@ -1284,6 +1285,8 @@
#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2 0x0348
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000 0x034C
#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E
+#define PCI_DEVICE_ID_NVIDIA_NVENET_14 0x0372
+#define PCI_DEVICE_ID_NVIDIA_NVENET_15 0x0373
#define PCI_VENDOR_ID_IMS 0x10e0
#define PCI_DEVICE_ID_IMS_8849 0x8849
diff --git a/include/linux/pmu.h b/include/linux/pmu.h
index 6d73eada277..373bd3b9b33 100644
--- a/include/linux/pmu.h
+++ b/include/linux/pmu.h
@@ -166,7 +166,7 @@ extern int pmu_i2c_simple_read(int bus, int addr, u8* data, int len);
extern int pmu_i2c_simple_write(int bus, int addr, u8* data, int len);
-#ifdef CONFIG_PMAC_PBOOK
+#ifdef CONFIG_PM
/*
* Stuff for putting the powerbook to sleep and waking it again.
*
@@ -208,6 +208,8 @@ struct pmu_sleep_notifier
int pmu_register_sleep_notifier(struct pmu_sleep_notifier* notifier);
int pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* notifier);
+#endif /* CONFIG_PM */
+
#define PMU_MAX_BATTERIES 2
/* values for pmu_power_flags */
@@ -235,6 +237,4 @@ extern int pmu_battery_count;
extern struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
extern unsigned int pmu_power_flags;
-#endif /* CONFIG_PMAC_PBOOK */
-
#endif /* __KERNEL__ */
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 9530b190316..ff48815bd3a 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -608,6 +608,8 @@ struct task_struct {
struct list_head run_list;
prio_array_t *array;
+ unsigned short ioprio;
+
unsigned long sleep_avg;
unsigned long long timestamp, last_ran;
unsigned long long sched_time; /* sched_clock time spent running */
@@ -763,6 +765,7 @@ struct task_struct {
nodemask_t mems_allowed;
int cpuset_mems_generation;
#endif
+ atomic_t fs_excl; /* holding fs exclusive resources */
};
static inline pid_t process_group(struct task_struct *tsk)
@@ -1112,7 +1115,8 @@ extern void unhash_process(struct task_struct *p);
/*
* Protects ->fs, ->files, ->mm, ->ptrace, ->group_info, ->comm, keyring
- * subscriptions and synchronises with wait4(). Also used in procfs.
+ * subscriptions and synchronises with wait4(). Also used in procfs. Also
+ * pins the final release of task.io_context.
*
* Nests both inside and outside of read_lock(&tasklist_lock).
* It must not be nested with write_lock_irq(&tasklist_lock),
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index 3a2702bbb1d..dc89116bb1c 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -19,6 +19,11 @@ static inline void secure_computing(int this_syscall)
__secure_computing(this_syscall);
}
+static inline int has_secure_computing(struct thread_info *ti)
+{
+ return unlikely(test_ti_thread_flag(ti, TIF_SECCOMP));
+}
+
#else /* CONFIG_SECCOMP */
#if (__GNUC__ > 2)
@@ -28,6 +33,11 @@ static inline void secure_computing(int this_syscall)
#endif
#define secure_computing(x) do { } while (0)
+/* static inline to preserve typechecking */
+static inline int has_secure_computing(struct thread_info *ti)
+{
+ return 0;
+}
#endif /* CONFIG_SECCOMP */
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 823181af6dd..3e3c1fa35b0 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -22,6 +22,7 @@ struct plat_serial8250_port {
unsigned int uartclk; /* UART clock rate */
unsigned char regshift; /* register shift */
unsigned char iotype; /* UPIO_* */
+ unsigned char hub6;
unsigned int flags; /* UPF_* flags */
};
diff --git a/include/linux/serio.h b/include/linux/serio.h
index a2d3b9ae06f..aa4d6493a03 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -83,6 +83,7 @@ static inline void serio_register_port(struct serio *serio)
}
void serio_unregister_port(struct serio *serio);
+void serio_unregister_child_port(struct serio *serio);
void __serio_unregister_port_delayed(struct serio *serio, struct module *owner);
static inline void serio_unregister_port_delayed(struct serio *serio)
{
@@ -153,6 +154,11 @@ static inline int serio_pin_driver(struct serio *serio)
return down_interruptible(&serio->drv_sem);
}
+static inline void serio_pin_driver_uninterruptible(struct serio *serio)
+{
+ down(&serio->drv_sem);
+}
+
static inline void serio_unpin_driver(struct serio *serio)
{
up(&serio->drv_sem);
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 1262cb43c3a..d5c3fe1bf33 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -14,11 +14,13 @@ extern struct list_head inode_unused;
* Yes, writeback.h requires sched.h
* No, sched.h is not included from here.
*/
-static inline int current_is_pdflush(void)
+static inline int task_is_pdflush(struct task_struct *task)
{
- return current->flags & PF_FLUSHER;
+ return task->flags & PF_FLUSHER;
}
+#define current_is_pdflush() task_is_pdflush(current)
+
/*
* fs/fs-writeback.c
*/
diff --git a/include/net/ieee80211.h b/include/net/ieee80211.h
new file mode 100644
index 00000000000..7fe57f957a5
--- /dev/null
+++ b/include/net/ieee80211.h
@@ -0,0 +1,882 @@
+/*
+ * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
+ * remains copyright by the original authors
+ *
+ * Portions of the merged code are based on Host AP (software wireless
+ * LAN access point) driver for Intersil Prism2/2.5/3.
+ *
+ * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+ * <jkmaline@cc.hut.fi>
+ * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+ *
+ * Adaption to a generic IEEE 802.11 stack by James Ketrenos
+ * <jketreno@linux.intel.com>
+ * Copyright (c) 2004, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation. See README and COPYING for
+ * more details.
+ */
+#ifndef IEEE80211_H
+#define IEEE80211_H
+
+#include <linux/if_ether.h> /* ETH_ALEN */
+#include <linux/kernel.h> /* ARRAY_SIZE */
+
+#if WIRELESS_EXT < 17
+#define IW_QUAL_QUAL_INVALID 0x10
+#define IW_QUAL_LEVEL_INVALID 0x20
+#define IW_QUAL_NOISE_INVALID 0x40
+#define IW_QUAL_QUAL_UPDATED 0x1
+#define IW_QUAL_LEVEL_UPDATED 0x2
+#define IW_QUAL_NOISE_UPDATED 0x4
+#endif
+
+#define IEEE80211_DATA_LEN 2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+ 6.2.1.1.2.
+
+ The figure in section 7.1.2 suggests a body size of up to 2312
+ bytes is allowed, which is a bit confusing, I suspect this
+ represents the 2304 bytes of real data, plus a possible 8 bytes of
+ WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+
+#define IEEE80211_HLEN 30
+#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+struct ieee80211_hdr {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct ieee80211_hdr_3addr {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+} __attribute__ ((packed));
+
+enum eap_type {
+ EAP_PACKET = 0,
+ EAPOL_START,
+ EAPOL_LOGOFF,
+ EAPOL_KEY,
+ EAPOL_ENCAP_ASF_ALERT
+};
+
+static const char *eap_types[] = {
+ [EAP_PACKET] = "EAP-Packet",
+ [EAPOL_START] = "EAPOL-Start",
+ [EAPOL_LOGOFF] = "EAPOL-Logoff",
+ [EAPOL_KEY] = "EAPOL-Key",
+ [EAPOL_ENCAP_ASF_ALERT] = "EAPOL-Encap-ASF-Alert"
+};
+
+static inline const char *eap_get_type(int type)
+{
+ return (type >= ARRAY_SIZE(eap_types)) ? "Unknown" : eap_types[type];
+}
+
+struct eapol {
+ u8 snap[6];
+ u16 ethertype;
+ u8 version;
+ u8 type;
+ u16 length;
+} __attribute__ ((packed));
+
+#define IEEE80211_3ADDR_LEN 24
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_FCS_LEN 4
+
+#define MIN_FRAG_THRESHOLD 256U
+#define MAX_FRAG_THRESHOLD 2346U
+
+/* Frame control field constants */
+#define IEEE80211_FCTL_VERS 0x0002
+#define IEEE80211_FCTL_FTYPE 0x000c
+#define IEEE80211_FCTL_STYPE 0x00f0
+#define IEEE80211_FCTL_TODS 0x0100
+#define IEEE80211_FCTL_FROMDS 0x0200
+#define IEEE80211_FCTL_MOREFRAGS 0x0400
+#define IEEE80211_FCTL_RETRY 0x0800
+#define IEEE80211_FCTL_PM 0x1000
+#define IEEE80211_FCTL_MOREDATA 0x2000
+#define IEEE80211_FCTL_WEP 0x4000
+#define IEEE80211_FCTL_ORDER 0x8000
+
+#define IEEE80211_FTYPE_MGMT 0x0000
+#define IEEE80211_FTYPE_CTL 0x0004
+#define IEEE80211_FTYPE_DATA 0x0008
+
+/* management */
+#define IEEE80211_STYPE_ASSOC_REQ 0x0000
+#define IEEE80211_STYPE_ASSOC_RESP 0x0010
+#define IEEE80211_STYPE_REASSOC_REQ 0x0020
+#define IEEE80211_STYPE_REASSOC_RESP 0x0030
+#define IEEE80211_STYPE_PROBE_REQ 0x0040
+#define IEEE80211_STYPE_PROBE_RESP 0x0050
+#define IEEE80211_STYPE_BEACON 0x0080
+#define IEEE80211_STYPE_ATIM 0x0090
+#define IEEE80211_STYPE_DISASSOC 0x00A0
+#define IEEE80211_STYPE_AUTH 0x00B0
+#define IEEE80211_STYPE_DEAUTH 0x00C0
+
+/* control */
+#define IEEE80211_STYPE_PSPOLL 0x00A0
+#define IEEE80211_STYPE_RTS 0x00B0
+#define IEEE80211_STYPE_CTS 0x00C0
+#define IEEE80211_STYPE_ACK 0x00D0
+#define IEEE80211_STYPE_CFEND 0x00E0
+#define IEEE80211_STYPE_CFENDACK 0x00F0
+
+/* data */
+#define IEEE80211_STYPE_DATA 0x0000
+#define IEEE80211_STYPE_DATA_CFACK 0x0010
+#define IEEE80211_STYPE_DATA_CFPOLL 0x0020
+#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
+#define IEEE80211_STYPE_NULLFUNC 0x0040
+#define IEEE80211_STYPE_CFACK 0x0050
+#define IEEE80211_STYPE_CFPOLL 0x0060
+#define IEEE80211_STYPE_CFACKPOLL 0x0070
+
+#define IEEE80211_SCTL_FRAG 0x000F
+#define IEEE80211_SCTL_SEQ 0xFFF0
+
+
+/* debug macros */
+
+#ifdef CONFIG_IEEE80211_DEBUG
+extern u32 ieee80211_debug_level;
+#define IEEE80211_DEBUG(level, fmt, args...) \
+do { if (ieee80211_debug_level & (level)) \
+ printk(KERN_DEBUG "ieee80211: %c %s " fmt, \
+ in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
+#else
+#define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
+#endif /* CONFIG_IEEE80211_DEBUG */
+
+/*
+ * To use the debug system;
+ *
+ * If you are defining a new debug classification, simply add it to the #define
+ * list here in the form of:
+ *
+ * #define IEEE80211_DL_xxxx VALUE
+ *
+ * shifting value to the left one bit from the previous entry. xxxx should be
+ * the name of the classification (for example, WEP)
+ *
+ * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
+ * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
+ * to send output to that classification.
+ *
+ * To add your debug level to the list of levels seen when you perform
+ *
+ * % cat /proc/net/ipw/debug_level
+ *
+ * you simply need to add your entry to the ipw_debug_levels array.
+ *
+ * If you do not see debug_level in /proc/net/ipw then you do not have
+ * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
+ *
+ */
+
+#define IEEE80211_DL_INFO (1<<0)
+#define IEEE80211_DL_WX (1<<1)
+#define IEEE80211_DL_SCAN (1<<2)
+#define IEEE80211_DL_STATE (1<<3)
+#define IEEE80211_DL_MGMT (1<<4)
+#define IEEE80211_DL_FRAG (1<<5)
+#define IEEE80211_DL_EAP (1<<6)
+#define IEEE80211_DL_DROP (1<<7)
+
+#define IEEE80211_DL_TX (1<<8)
+#define IEEE80211_DL_RX (1<<9)
+
+#define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
+#define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
+#define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
+
+#define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
+#define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
+#define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
+#define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
+#define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
+#define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
+#define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
+#define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
+#define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/if_arp.h> /* ARPHRD_ETHER */
+
+#ifndef WIRELESS_SPY
+#define WIRELESS_SPY // enable iwspy support
+#endif
+#include <net/iw_handler.h> // new driver API
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
+
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+
+#ifndef ETH_P_80211_RAW
+#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
+#endif
+
+/* IEEE 802.11 defines */
+
+#define P80211_OUI_LEN 3
+
+struct ieee80211_snap_hdr {
+
+ u8 dsap; /* always 0xAA */
+ u8 ssap; /* always 0xAA */
+ u8 ctrl; /* always 0x03 */
+ u8 oui[P80211_OUI_LEN]; /* organizational universal id */
+
+} __attribute__ ((packed));
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
+
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
+#define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ)
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_BSS (1<<0)
+#define WLAN_CAPABILITY_IBSS (1<<1)
+#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
+#define WLAN_CAPABILITY_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
+#define WLAN_CAPABILITY_PBCC (1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
+
+/* Status codes */
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18
+/* 802.11b */
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
+#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
+
+/* Reason codes */
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
+
+
+/* Information Element IDs */
+#define WLAN_EID_SSID 0
+#define WLAN_EID_SUPP_RATES 1
+#define WLAN_EID_FH_PARAMS 2
+#define WLAN_EID_DS_PARAMS 3
+#define WLAN_EID_CF_PARAMS 4
+#define WLAN_EID_TIM 5
+#define WLAN_EID_IBSS_PARAMS 6
+#define WLAN_EID_CHALLENGE 16
+#define WLAN_EID_RSN 48
+#define WLAN_EID_GENERIC 221
+
+#define IEEE80211_MGMT_HDR_LEN 24
+#define IEEE80211_DATA_HDR3_LEN 24
+#define IEEE80211_DATA_HDR4_LEN 30
+
+
+#define IEEE80211_STATMASK_SIGNAL (1<<0)
+#define IEEE80211_STATMASK_RSSI (1<<1)
+#define IEEE80211_STATMASK_NOISE (1<<2)
+#define IEEE80211_STATMASK_RATE (1<<3)
+#define IEEE80211_STATMASK_WEMASK 0x7
+
+
+#define IEEE80211_CCK_MODULATION (1<<0)
+#define IEEE80211_OFDM_MODULATION (1<<1)
+
+#define IEEE80211_24GHZ_BAND (1<<0)
+#define IEEE80211_52GHZ_BAND (1<<1)
+
+#define IEEE80211_CCK_RATE_1MB 0x02
+#define IEEE80211_CCK_RATE_2MB 0x04
+#define IEEE80211_CCK_RATE_5MB 0x0B
+#define IEEE80211_CCK_RATE_11MB 0x16
+#define IEEE80211_OFDM_RATE_6MB 0x0C
+#define IEEE80211_OFDM_RATE_9MB 0x12
+#define IEEE80211_OFDM_RATE_12MB 0x18
+#define IEEE80211_OFDM_RATE_18MB 0x24
+#define IEEE80211_OFDM_RATE_24MB 0x30
+#define IEEE80211_OFDM_RATE_36MB 0x48
+#define IEEE80211_OFDM_RATE_48MB 0x60
+#define IEEE80211_OFDM_RATE_54MB 0x6C
+#define IEEE80211_BASIC_RATE_MASK 0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
+
+#define IEEE80211_CCK_RATES_MASK 0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
+ IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
+ IEEE80211_CCK_RATE_5MB_MASK | \
+ IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK 0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
+ IEEE80211_OFDM_RATE_12MB_MASK | \
+ IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
+ IEEE80211_OFDM_RATE_9MB_MASK | \
+ IEEE80211_OFDM_RATE_18MB_MASK | \
+ IEEE80211_OFDM_RATE_36MB_MASK | \
+ IEEE80211_OFDM_RATE_48MB_MASK | \
+ IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
+ IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+#define IEEE80211_NUM_OFDM_RATES 8
+#define IEEE80211_NUM_CCK_RATES 4
+#define IEEE80211_OFDM_SHIFT_MASK_A 4
+
+
+
+
+/* NOTE: This data is for statistical purposes; not all hardware provides this
+ * information for frames received. Not setting these will not cause
+ * any adverse affects. */
+struct ieee80211_rx_stats {
+ u32 mac_time;
+ s8 rssi;
+ u8 signal;
+ u8 noise;
+ u16 rate; /* in 100 kbps */
+ u8 received_channel;
+ u8 control;
+ u8 mask;
+ u8 freq;
+ u16 len;
+};
+
+/* IEEE 802.11 requires that STA supports concurrent reception of at least
+ * three fragmented frames. This define can be increased to support more
+ * concurrent frames, but it should be noted that each entry can consume about
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+#define IEEE80211_FRAG_CACHE_LEN 4
+
+struct ieee80211_frag_entry {
+ unsigned long first_frag_time;
+ unsigned int seq;
+ unsigned int last_frag;
+ struct sk_buff *skb;
+ u8 src_addr[ETH_ALEN];
+ u8 dst_addr[ETH_ALEN];
+};
+
+struct ieee80211_stats {
+ unsigned int tx_unicast_frames;
+ unsigned int tx_multicast_frames;
+ unsigned int tx_fragments;
+ unsigned int tx_unicast_octets;
+ unsigned int tx_multicast_octets;
+ unsigned int tx_deferred_transmissions;
+ unsigned int tx_single_retry_frames;
+ unsigned int tx_multiple_retry_frames;
+ unsigned int tx_retry_limit_exceeded;
+ unsigned int tx_discards;
+ unsigned int rx_unicast_frames;
+ unsigned int rx_multicast_frames;
+ unsigned int rx_fragments;
+ unsigned int rx_unicast_octets;
+ unsigned int rx_multicast_octets;
+ unsigned int rx_fcs_errors;
+ unsigned int rx_discards_no_buffer;
+ unsigned int tx_discards_wrong_sa;
+ unsigned int rx_discards_undecryptable;
+ unsigned int rx_message_in_msg_fragments;
+ unsigned int rx_message_in_bad_msg_fragments;
+};
+
+struct ieee80211_device;
+
+#define SEC_KEY_1 (1<<0)
+#define SEC_KEY_2 (1<<1)
+#define SEC_KEY_3 (1<<2)
+#define SEC_KEY_4 (1<<3)
+#define SEC_ACTIVE_KEY (1<<4)
+#define SEC_AUTH_MODE (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL (1<<7)
+#define SEC_ENABLED (1<<8)
+
+#define SEC_LEVEL_0 0 /* None */
+#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2 2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3 4 /* Level 2 + CCMP */
+
+#define WEP_KEYS 4
+#define WEP_KEY_LEN 13
+
+struct ieee80211_security {
+ u16 active_key:2,
+ enabled:1,
+ auth_mode:2,
+ auth_algo:4,
+ unicast_uses_group:1;
+ u8 key_sizes[WEP_KEYS];
+ u8 keys[WEP_KEYS][WEP_KEY_LEN];
+ u8 level;
+ u16 flags;
+} __attribute__ ((packed));
+
+
+/*
+
+ 802.11 data frame from AP
+
+ ,-------------------------------------------------------------------.
+Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
+ |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
+ | | tion | (BSSID) | | | ence | data | |
+ `-------------------------------------------------------------------'
+
+Total: 28-2340 bytes
+
+*/
+
+struct ieee80211_header_data {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[6];
+ u8 addr2[6];
+ u8 addr3[6];
+ u16 seq_ctrl;
+};
+
+#define BEACON_PROBE_SSID_ID_POSITION 12
+
+/* Management Frame Information Element Types */
+#define MFIE_TYPE_SSID 0
+#define MFIE_TYPE_RATES 1
+#define MFIE_TYPE_FH_SET 2
+#define MFIE_TYPE_DS_SET 3
+#define MFIE_TYPE_CF_SET 4
+#define MFIE_TYPE_TIM 5
+#define MFIE_TYPE_IBSS_SET 6
+#define MFIE_TYPE_CHALLENGE 16
+#define MFIE_TYPE_RSN 48
+#define MFIE_TYPE_RATES_EX 50
+#define MFIE_TYPE_GENERIC 221
+
+struct ieee80211_info_element_hdr {
+ u8 id;
+ u8 len;
+} __attribute__ ((packed));
+
+struct ieee80211_info_element {
+ u8 id;
+ u8 len;
+ u8 data[0];
+} __attribute__ ((packed));
+
+/*
+ * These are the data types that can make up management packets
+ *
+ u16 auth_algorithm;
+ u16 auth_sequence;
+ u16 beacon_interval;
+ u16 capability;
+ u8 current_ap[ETH_ALEN];
+ u16 listen_interval;
+ struct {
+ u16 association_id:14, reserved:2;
+ } __attribute__ ((packed));
+ u32 time_stamp[2];
+ u16 reason;
+ u16 status;
+*/
+
+struct ieee80211_authentication {
+ struct ieee80211_header_data header;
+ u16 algorithm;
+ u16 transaction;
+ u16 status;
+ struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+
+struct ieee80211_probe_response {
+ struct ieee80211_header_data header;
+ u32 time_stamp[2];
+ u16 beacon_interval;
+ u16 capability;
+ struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+struct ieee80211_assoc_request_frame {
+ u16 capability;
+ u16 listen_interval;
+ u8 current_ap[ETH_ALEN];
+ struct ieee80211_info_element info_element;
+} __attribute__ ((packed));
+
+struct ieee80211_assoc_response_frame {
+ struct ieee80211_hdr_3addr header;
+ u16 capability;
+ u16 status;
+ u16 aid;
+ struct ieee80211_info_element info_element; /* supported rates */
+} __attribute__ ((packed));
+
+
+struct ieee80211_txb {
+ u8 nr_frags;
+ u8 encrypted;
+ u16 reserved;
+ u16 frag_size;
+ u16 payload_size;
+ struct sk_buff *fragments[0];
+};
+
+
+/* SWEEP TABLE ENTRIES NUMBER*/
+#define MAX_SWEEP_TAB_ENTRIES 42
+#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
+/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
+ * only use 8, and then use extended rates for the remaining supported
+ * rates. Other APs, however, stick all of their supported rates on the
+ * main rates information element... */
+#define MAX_RATES_LENGTH ((u8)12)
+#define MAX_RATES_EX_LENGTH ((u8)16)
+#define MAX_NETWORK_COUNT 128
+
+#define CRC_LENGTH 4U
+
+#define MAX_WPA_IE_LEN 64
+
+#define NETWORK_EMPTY_ESSID (1<<0)
+#define NETWORK_HAS_OFDM (1<<1)
+#define NETWORK_HAS_CCK (1<<2)
+
+struct ieee80211_network {
+ /* These entries are used to identify a unique network */
+ u8 bssid[ETH_ALEN];
+ u8 channel;
+ /* Ensure null-terminated for any debug msgs */
+ u8 ssid[IW_ESSID_MAX_SIZE + 1];
+ u8 ssid_len;
+
+ /* These are network statistics */
+ struct ieee80211_rx_stats stats;
+ u16 capability;
+ u8 rates[MAX_RATES_LENGTH];
+ u8 rates_len;
+ u8 rates_ex[MAX_RATES_EX_LENGTH];
+ u8 rates_ex_len;
+ unsigned long last_scanned;
+ u8 mode;
+ u8 flags;
+ u32 last_associate;
+ u32 time_stamp[2];
+ u16 beacon_interval;
+ u16 listen_interval;
+ u16 atim_window;
+ u8 wpa_ie[MAX_WPA_IE_LEN];
+ size_t wpa_ie_len;
+ u8 rsn_ie[MAX_WPA_IE_LEN];
+ size_t rsn_ie_len;
+ struct list_head list;
+};
+
+enum ieee80211_state {
+ IEEE80211_UNINITIALIZED = 0,
+ IEEE80211_INITIALIZED,
+ IEEE80211_ASSOCIATING,
+ IEEE80211_ASSOCIATED,
+ IEEE80211_AUTHENTICATING,
+ IEEE80211_AUTHENTICATED,
+ IEEE80211_SHUTDOWN
+};
+
+#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
+#define DEFAULT_FTS 2346
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+#define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
+
+
+extern inline int is_broadcast_ether_addr(const u8 *addr)
+{
+ return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) && \
+ (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+}
+
+#define CFG_IEEE80211_RESERVE_FCS (1<<0)
+#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
+
+struct ieee80211_device {
+ struct net_device *dev;
+
+ /* Bookkeeping structures */
+ struct net_device_stats stats;
+ struct ieee80211_stats ieee_stats;
+
+ /* Probe / Beacon management */
+ struct list_head network_free_list;
+ struct list_head network_list;
+ struct ieee80211_network *networks;
+ int scans;
+ int scan_age;
+
+ int iw_mode; /* operating mode (IW_MODE_*) */
+
+ spinlock_t lock;
+
+ int tx_headroom; /* Set to size of any additional room needed at front
+ * of allocated Tx SKBs */
+ u32 config;
+
+ /* WEP and other encryption related settings at the device level */
+ int open_wep; /* Set to 1 to allow unencrypted frames */
+
+ int reset_on_keychange; /* Set to 1 if the HW needs to be reset on
+ * WEP key changes */
+
+ /* If the host performs {en,de}cryption, then set to 1 */
+ int host_encrypt;
+ int host_decrypt;
+ int ieee802_1x; /* is IEEE 802.1X used */
+
+ /* WPA data */
+ int wpa_enabled;
+ int drop_unencrypted;
+ int tkip_countermeasures;
+ int privacy_invoked;
+ size_t wpa_ie_len;
+ u8 *wpa_ie;
+
+ struct list_head crypt_deinit_list;
+ struct ieee80211_crypt_data *crypt[WEP_KEYS];
+ int tx_keyidx; /* default TX key index (crypt[tx_keyidx]) */
+ struct timer_list crypt_deinit_timer;
+
+ int bcrx_sta_key; /* use individual keys to override default keys even
+ * with RX of broad/multicast frames */
+
+ /* Fragmentation structures */
+ struct ieee80211_frag_entry frag_cache[IEEE80211_FRAG_CACHE_LEN];
+ unsigned int frag_next_idx;
+ u16 fts; /* Fragmentation Threshold */
+
+ /* Association info */
+ u8 bssid[ETH_ALEN];
+
+ enum ieee80211_state state;
+
+ int mode; /* A, B, G */
+ int modulation; /* CCK, OFDM */
+ int freq_band; /* 2.4Ghz, 5.2Ghz, Mixed */
+ int abg_ture; /* ABG flag */
+
+ /* Callback functions */
+ void (*set_security)(struct net_device *dev,
+ struct ieee80211_security *sec);
+ int (*hard_start_xmit)(struct ieee80211_txb *txb,
+ struct net_device *dev);
+ int (*reset_port)(struct net_device *dev);
+
+ /* This must be the last item so that it points to the data
+ * allocated beyond this structure by alloc_ieee80211 */
+ u8 priv[0];
+};
+
+#define IEEE_A (1<<0)
+#define IEEE_B (1<<1)
+#define IEEE_G (1<<2)
+#define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
+
+extern inline void *ieee80211_priv(struct net_device *dev)
+{
+ return ((struct ieee80211_device *)netdev_priv(dev))->priv;
+}
+
+extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+{
+ /* Single white space is for Linksys APs */
+ if (essid_len == 1 && essid[0] == ' ')
+ return 1;
+
+ /* Otherwise, if the entire essid is 0, we assume it is hidden */
+ while (essid_len) {
+ essid_len--;
+ if (essid[essid_len] != '\0')
+ return 0;
+ }
+
+ return 1;
+}
+
+extern inline int ieee80211_is_valid_mode(struct ieee80211_device *ieee, int mode)
+{
+ /*
+ * It is possible for both access points and our device to support
+ * combinations of modes, so as long as there is one valid combination
+ * of ap/device supported modes, then return success
+ *
+ */
+ if ((mode & IEEE_A) &&
+ (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+ (ieee->freq_band & IEEE80211_52GHZ_BAND))
+ return 1;
+
+ if ((mode & IEEE_G) &&
+ (ieee->modulation & IEEE80211_OFDM_MODULATION) &&
+ (ieee->freq_band & IEEE80211_24GHZ_BAND))
+ return 1;
+
+ if ((mode & IEEE_B) &&
+ (ieee->modulation & IEEE80211_CCK_MODULATION) &&
+ (ieee->freq_band & IEEE80211_24GHZ_BAND))
+ return 1;
+
+ return 0;
+}
+
+extern inline int ieee80211_get_hdrlen(u16 fc)
+{
+ int hdrlen = 24;
+
+ switch (WLAN_FC_GET_TYPE(fc)) {
+ case IEEE80211_FTYPE_DATA:
+ if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
+ hdrlen = 30; /* Addr4 */
+ break;
+ case IEEE80211_FTYPE_CTL:
+ switch (WLAN_FC_GET_STYPE(fc)) {
+ case IEEE80211_STYPE_CTS:
+ case IEEE80211_STYPE_ACK:
+ hdrlen = 10;
+ break;
+ default:
+ hdrlen = 16;
+ break;
+ }
+ break;
+ }
+
+ return hdrlen;
+}
+
+
+
+/* ieee80211.c */
+extern void free_ieee80211(struct net_device *dev);
+extern struct net_device *alloc_ieee80211(int sizeof_priv);
+
+extern int ieee80211_set_encryption(struct ieee80211_device *ieee);
+
+/* ieee80211_tx.c */
+
+
+extern int ieee80211_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+extern void ieee80211_txb_free(struct ieee80211_txb *);
+
+
+/* ieee80211_rx.c */
+extern int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
+ struct ieee80211_rx_stats *rx_stats);
+extern void ieee80211_rx_mgt(struct ieee80211_device *ieee,
+ struct ieee80211_hdr *header,
+ struct ieee80211_rx_stats *stats);
+
+/* iee80211_wx.c */
+extern int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key);
+extern int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *key);
+
+
+extern inline void ieee80211_increment_scans(struct ieee80211_device *ieee)
+{
+ ieee->scans++;
+}
+
+extern inline int ieee80211_get_scans(struct ieee80211_device *ieee)
+{
+ return ieee->scans;
+}
+
+static inline const char *escape_essid(const char *essid, u8 essid_len) {
+ static char escaped[IW_ESSID_MAX_SIZE * 2 + 1];
+ const char *s = essid;
+ char *d = escaped;
+
+ if (ieee80211_is_empty_essid(essid, essid_len)) {
+ memcpy(escaped, "<hidden>", sizeof("<hidden>"));
+ return escaped;
+ }
+
+ essid_len = min(essid_len, (u8)IW_ESSID_MAX_SIZE);
+ while (essid_len--) {
+ if (*s == '\0') {
+ *d++ = '\\';
+ *d++ = '0';
+ s++;
+ } else {
+ *d++ = *s++;
+ }
+ }
+ *d = '\0';
+ return escaped;
+}
+
+#endif /* IEEE80211_H */