diff options
Diffstat (limited to 'init')
-rw-r--r-- | init/Kconfig | 92 | ||||
-rw-r--r-- | init/calibrate.c | 9 | ||||
-rw-r--r-- | init/do_mounts.c | 112 | ||||
-rw-r--r-- | init/initramfs.c | 5 | ||||
-rw-r--r-- | init/main.c | 28 |
5 files changed, 115 insertions, 131 deletions
diff --git a/init/Kconfig b/init/Kconfig index b9d11a899b8..92b23e25661 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1,3 +1,11 @@ +config ARCH + string + option env="ARCH" + +config KERNELVERSION + string + option env="KERNELVERSION" + config DEFCONFIG_LIST string depends on !UML @@ -238,7 +246,7 @@ config AUDIT config AUDITSYSCALL bool "Enable system-call auditing support" - depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64) + depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64|| SUPERH) default y if SECURITY_SELINUX help Enable low-overhead system-call auditing infrastructure that @@ -363,6 +371,7 @@ config CGROUP_CPUACCT config SYSFS_DEPRECATED bool "Create deprecated sysfs files" + depends on SYSFS default y help This option creates deprecated symlinks such as the @@ -532,6 +541,18 @@ config ELF_CORE help Enable support for generating core dumps. Disabling saves about 4k. +config COMPAT_BRK + bool "Disable heap randomization" + default y + help + Randomizing heap placement makes heap exploits harder, but it + also breaks ancient binaries (including anything libc5 based). + This option changes the bootup default to heap randomization + disabled, and can be overriden runtime by setting + /proc/sys/kernel/randomize_va_space to 2. + + On non-ancient distros (post-2000 ones) Y is usually a safe choice. + config BASE_FULL default y bool "Enable full-sized data structures for core" if EMBEDDED @@ -573,7 +594,6 @@ config SIGNALFD config TIMERFD bool "Enable timerfd() system call" if EMBEDDED select ANON_INODES - depends on BROKEN default y help Enable the timerfd() system call that allows to receive timer @@ -648,14 +668,36 @@ config SLOB depends on EMBEDDED bool "SLOB (Simple Allocator)" help - SLOB replaces the SLAB allocator with a drastically simpler - allocator. SLOB is more space efficient than SLAB but does not - scale well (single lock for all operations) and is also highly - susceptible to fragmentation. SLUB can accomplish a higher object - density. It is usually better to use SLUB instead of SLOB. + SLOB replaces the stock allocator with a drastically simpler + allocator. SLOB is generally more space efficient but + does not perform as well on large systems. endchoice +config PROFILING + bool "Profiling support (EXPERIMENTAL)" + help + Say Y here to enable the extended profiling support mechanisms used + by profilers such as OProfile. + +config MARKERS + bool "Activate markers" + help + Place an empty function call at each marker site. Can be + dynamically changed for a probe function. + +source "arch/Kconfig" + +config PROC_PAGE_MONITOR + default y + depends on PROC_FS && MMU + bool "Enable /proc page monitoring" if EMBEDDED + help + Various /proc files exist to monitor process memory utilization: + /proc/pid/smaps, /proc/pid/clear_refs, /proc/pid/pagemap, + /proc/kpagecount, and /proc/kpageflags. Disabling these + interfaces will reduce the size of the kernel by approximately 4kb. + endmenu # General setup config SLABINFO @@ -762,3 +804,39 @@ source "block/Kconfig" config PREEMPT_NOTIFIERS bool + +choice + prompt "RCU implementation type:" + default CLASSIC_RCU + help + This allows you to choose either the classic RCU implementation + that is designed for best read-side performance on non-realtime + systems, or the preemptible RCU implementation for best latency + on realtime systems. Note that some kernel preemption modes + will restrict your choice. + + Select the default if you are unsure. + +config CLASSIC_RCU + bool "Classic RCU" + help + This option selects the classic RCU implementation that is + designed for best read-side performance on non-realtime + systems. + + Say Y if you are unsure. + +config PREEMPT_RCU + bool "Preemptible RCU" + depends on PREEMPT + help + This option reduces the latency of the kernel by making certain + RCU sections preemptible. Normally RCU code is non-preemptible, if + this option is selected then read-only RCU sections become + preemptible. This helps latency, but may expose bugs due to + now-naive assumptions about each RCU read-side critical section + remaining on a given CPU through its execution. + + Say N if you are unsure. + +endchoice diff --git a/init/calibrate.c b/init/calibrate.c index 2d3d73bd4ce..ecb3822d4f7 100644 --- a/init/calibrate.c +++ b/init/calibrate.c @@ -7,8 +7,7 @@ #include <linux/jiffies.h> #include <linux/delay.h> #include <linux/init.h> - -#include <asm/timex.h> +#include <linux/timex.h> unsigned long preset_lpj; static int __init lpj_setup(char *str) @@ -29,7 +28,7 @@ __setup("lpj=", lpj_setup); #define DELAY_CALIBRATION_TICKS ((HZ < 100) ? 1 : (HZ/100)) #define MAX_DIRECT_CALIBRATION_RETRIES 5 -static unsigned long __devinit calibrate_delay_direct(void) +static unsigned long __cpuinit calibrate_delay_direct(void) { unsigned long pre_start, start, post_start; unsigned long pre_end, end, post_end; @@ -102,7 +101,7 @@ static unsigned long __devinit calibrate_delay_direct(void) return 0; } #else -static unsigned long __devinit calibrate_delay_direct(void) {return 0;} +static unsigned long __cpuinit calibrate_delay_direct(void) {return 0;} #endif /* @@ -112,7 +111,7 @@ static unsigned long __devinit calibrate_delay_direct(void) {return 0;} */ #define LPS_PREC 8 -void __devinit calibrate_delay(void) +void __cpuinit calibrate_delay(void) { unsigned long ticks, loopbit; int lps_precision = LPS_PREC; diff --git a/init/do_mounts.c b/init/do_mounts.c index 4efa1e5385e..f86573126f8 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -11,6 +11,7 @@ #include <linux/mount.h> #include <linux/device.h> #include <linux/init.h> +#include <linux/fs.h> #include <linux/nfs_fs.h> #include <linux/nfs_fs_sb.h> @@ -18,8 +19,6 @@ #include "do_mounts.h" -extern int get_filesystem_list(char * buf); - int __initdata rd_doload; /* 1 = load RAM disk, 0 = don't load */ int root_mountflags = MS_RDONLY | MS_SILENT; @@ -55,69 +54,6 @@ static int __init readwrite(char *str) __setup("ro", readonly); __setup("rw", readwrite); -static dev_t try_name(char *name, int part) -{ - char path[64]; - char buf[32]; - int range; - dev_t res; - char *s; - int len; - int fd; - unsigned int maj, min; - - /* read device number from .../dev */ - - sprintf(path, "/sys/block/%s/dev", name); - fd = sys_open(path, 0, 0); - if (fd < 0) - goto fail; - len = sys_read(fd, buf, 32); - sys_close(fd); - if (len <= 0 || len == 32 || buf[len - 1] != '\n') - goto fail; - buf[len - 1] = '\0'; - if (sscanf(buf, "%u:%u", &maj, &min) == 2) { - /* - * Try the %u:%u format -- see print_dev_t() - */ - res = MKDEV(maj, min); - if (maj != MAJOR(res) || min != MINOR(res)) - goto fail; - } else { - /* - * Nope. Try old-style "0321" - */ - res = new_decode_dev(simple_strtoul(buf, &s, 16)); - if (*s) - goto fail; - } - - /* if it's there and we are not looking for a partition - that's it */ - if (!part) - return res; - - /* otherwise read range from .../range */ - sprintf(path, "/sys/block/%s/range", name); - fd = sys_open(path, 0, 0); - if (fd < 0) - goto fail; - len = sys_read(fd, buf, 32); - sys_close(fd); - if (len <= 0 || len == 32 || buf[len - 1] != '\n') - goto fail; - buf[len - 1] = '\0'; - range = simple_strtoul(buf, &s, 10); - if (*s) - goto fail; - - /* if partition is within range - we got it */ - if (part < range) - return res + part; -fail: - return 0; -} - /* * Convert a name into device number. We accept the following variants: * @@ -129,12 +65,10 @@ fail: * 5) /dev/<disk_name>p<decimal> - same as the above, that form is * used when disk name of partitioned disk ends on a digit. * - * If name doesn't have fall into the categories above, we return 0. - * Sysfs is used to check if something is a disk name - it has - * all known disks under bus/block/devices. If the disk name - * contains slashes, name of sysfs node has them replaced with - * bangs. try_name() does the actual checks, assuming that sysfs - * is mounted on rootfs /sys. + * If name doesn't have fall into the categories above, we return (0,0). + * block_class is used to check if something is a disk name. If the disk + * name contains slashes, the device name has them replaced with + * bangs. */ dev_t name_to_dev_t(char *name) @@ -142,13 +76,6 @@ dev_t name_to_dev_t(char *name) char s[32]; char *p; dev_t res = 0; - int part; - -#ifdef CONFIG_SYSFS - int mkdir_err = sys_mkdir("/sys", 0700); - if (sys_mount("sysfs", "/sys", "sysfs", 0, NULL) < 0) - goto out; -#endif if (strncmp(name, "/dev/", 5) != 0) { unsigned maj, min; @@ -164,6 +91,7 @@ dev_t name_to_dev_t(char *name) } goto done; } + name += 5; res = Root_NFS; if (strcmp(name, "nfs") == 0) @@ -178,35 +106,14 @@ dev_t name_to_dev_t(char *name) for (p = s; *p; p++) if (*p == '/') *p = '!'; - res = try_name(s, 0); + res = blk_lookup_devt(s); if (res) goto done; - while (p > s && isdigit(p[-1])) - p--; - if (p == s || !*p || *p == '0') - goto fail; - part = simple_strtoul(p, NULL, 10); - *p = '\0'; - res = try_name(s, part); - if (res) - goto done; - - if (p < s + 2 || !isdigit(p[-2]) || p[-1] != 'p') - goto fail; - p[-1] = '\0'; - res = try_name(s, part); +fail: + return 0; done: -#ifdef CONFIG_SYSFS - sys_umount("/sys", 0); -out: - if (!mkdir_err) - sys_rmdir("/sys"); -#endif return res; -fail: - res = 0; - goto done; } static int __init root_dev_setup(char *line) @@ -470,6 +377,5 @@ void __init prepare_namespace(void) out: sys_mount(".", "/", NULL, MS_MOVE, NULL); sys_chroot("."); - security_sb_post_mountroot(); } diff --git a/init/initramfs.c b/init/initramfs.c index 1db02a0025d..d53fee8d860 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -503,7 +503,6 @@ static int __init retain_initrd_param(char *str) __setup("retain_initrd", retain_initrd_param); extern char __initramfs_start[], __initramfs_end[]; -#ifdef CONFIG_BLK_DEV_INITRD #include <linux/initrd.h> #include <linux/kexec.h> @@ -539,15 +538,12 @@ skip: initrd_end = 0; } -#endif - static int __init populate_rootfs(void) { char *err = unpack_to_rootfs(__initramfs_start, __initramfs_end - __initramfs_start, 0); if (err) panic(err); -#ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) { #ifdef CONFIG_BLK_DEV_RAM int fd; @@ -579,7 +575,6 @@ static int __init populate_rootfs(void) free_initrd(); #endif } -#endif return 0; } rootfs_initcall(populate_rootfs); diff --git a/init/main.c b/init/main.c index 80b04b6c515..c691f5f7fc2 100644 --- a/init/main.c +++ b/init/main.c @@ -57,6 +57,7 @@ #include <linux/device.h> #include <linux/kthread.h> #include <linux/sched.h> +#include <linux/signal.h> #include <asm/io.h> #include <asm/bugs.h> @@ -83,7 +84,6 @@ extern void init_IRQ(void); extern void fork_init(unsigned long); extern void mca_init(void); extern void sbus_init(void); -extern void signals_init(void); extern void pidhash_init(void); extern void pidmap_init(void); extern void prio_tree_init(void); @@ -128,7 +128,7 @@ static char *ramdisk_execute_command; #ifdef CONFIG_SMP /* Setup configured maximum number of CPUs to activate */ -static unsigned int __initdata max_cpus = NR_CPUS; +unsigned int __initdata setup_max_cpus = NR_CPUS; /* * Setup routine for controlling SMP activation @@ -146,7 +146,7 @@ static inline void disable_ioapic_setup(void) {}; static int __init nosmp(char *str) { - max_cpus = 0; + setup_max_cpus = 0; disable_ioapic_setup(); return 0; } @@ -155,8 +155,8 @@ early_param("nosmp", nosmp); static int __init maxcpus(char *str) { - get_option(&str, &max_cpus); - if (max_cpus == 0) + get_option(&str, &setup_max_cpus); + if (setup_max_cpus == 0) disable_ioapic_setup(); return 0; @@ -164,7 +164,7 @@ static int __init maxcpus(char *str) early_param("maxcpus", maxcpus); #else -#define max_cpus NR_CPUS +#define setup_max_cpus NR_CPUS #endif /* @@ -318,6 +318,10 @@ static int __init unknown_bootoption(char *param, char *val) return 0; } +#ifdef CONFIG_DEBUG_PAGEALLOC +int __read_mostly debug_pagealloc_enabled = 0; +#endif + static int __init init_setup(char *str) { unsigned int i; @@ -363,7 +367,7 @@ static inline void smp_prepare_cpus(unsigned int maxcpus) { } #else -#ifdef __GENERIC_PER_CPU +#ifndef CONFIG_HAVE_SETUP_PER_CPU_AREA unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; EXPORT_SYMBOL(__per_cpu_offset); @@ -384,7 +388,7 @@ static void __init setup_per_cpu_areas(void) ptr += size; } } -#endif /* !__GENERIC_PER_CPU */ +#endif /* CONFIG_HAVE_SETUP_PER_CPU_AREA */ /* Called by boot processor to activate the rest. */ static void __init smp_init(void) @@ -393,7 +397,7 @@ static void __init smp_init(void) /* FIXME: This should be done in userspace --RR */ for_each_present_cpu(cpu) { - if (num_online_cpus() >= max_cpus) + if (num_online_cpus() >= setup_max_cpus) break; if (!cpu_online(cpu)) cpu_up(cpu); @@ -401,7 +405,7 @@ static void __init smp_init(void) /* Any cleanup work */ printk(KERN_INFO "Brought up %ld CPUs\n", (long)num_online_cpus()); - smp_cpus_done(max_cpus); + smp_cpus_done(setup_max_cpus); } #endif @@ -552,6 +556,7 @@ asmlinkage void __init start_kernel(void) preempt_disable(); build_all_zonelists(); page_alloc_init(); + enable_debug_pagealloc(); printk(KERN_NOTICE "Kernel command line: %s\n", boot_command_line); parse_early_param(); parse_args("Booting kernel", static_command_line, __start___param, @@ -607,6 +612,7 @@ asmlinkage void __init start_kernel(void) vfs_caches_init_early(); cpuset_init_early(); mem_init(); + cpu_hotplug_init(); kmem_cache_init(); setup_per_cpu_pageset(); numa_policy_init(); @@ -823,7 +829,7 @@ static int __init kernel_init(void * unused) __set_special_pids(1, 1); cad_pid = task_pid(current); - smp_prepare_cpus(max_cpus); + smp_prepare_cpus(setup_max_cpus); do_pre_smp_initcalls(); |