diff options
Diffstat (limited to 'net/mac80211/regdomain.c')
| -rw-r--r-- | net/mac80211/regdomain.c | 152 |
1 files changed, 0 insertions, 152 deletions
diff --git a/net/mac80211/regdomain.c b/net/mac80211/regdomain.c deleted file mode 100644 index f42678fa62d..00000000000 --- a/net/mac80211/regdomain.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * Copyright 2002-2005, Instant802 Networks, Inc. - * Copyright 2005-2006, Devicescape Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * This regulatory domain control implementation is known to be incomplete - * and confusing. mac80211 regulatory domain control will be significantly - * reworked in the not-too-distant future. - * - * For now, drivers wishing to control which channels are and aren't available - * are advised as follows: - * - set the IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED flag - * - continue to include *ALL* possible channels in the modes registered - * through ieee80211_register_hwmode() - * - for each allowable ieee80211_channel structure registered in the above - * call, set the flag member to some meaningful value such as - * IEEE80211_CHAN_W_SCAN | IEEE80211_CHAN_W_ACTIVE_SCAN | - * IEEE80211_CHAN_W_IBSS. - * - leave flag as 0 for non-allowable channels - * - * The usual implementation is for a driver to read a device EEPROM to - * determine which regulatory domain it should be operating under, then - * looking up the allowable channels in a driver-local table, then performing - * the above. - */ - -#include <linux/module.h> -#include <linux/netdevice.h> -#include <net/mac80211.h> -#include "ieee80211_i.h" - -static int ieee80211_regdom = 0x10; /* FCC */ -module_param(ieee80211_regdom, int, 0444); -MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain; 64=MKK"); - -/* - * If firmware is upgraded by the vendor, additional channels can be used based - * on the new Japanese regulatory rules. This is indicated by setting - * ieee80211_japan_5ghz module parameter to one when loading the 80211 kernel - * module. - */ -static int ieee80211_japan_5ghz /* = 0 */; -module_param(ieee80211_japan_5ghz, int, 0444); -MODULE_PARM_DESC(ieee80211_japan_5ghz, "Vendor-updated firmware for 5 GHz"); - - -struct ieee80211_channel_range { - short start_freq; - short end_freq; - unsigned char power_level; - unsigned char antenna_max; -}; - -static const struct ieee80211_channel_range ieee80211_fcc_channels[] = { - { 2412, 2462, 27, 6 } /* IEEE 802.11b/g, channels 1..11 */, - { 5180, 5240, 17, 6 } /* IEEE 802.11a, channels 36..48 */, - { 5260, 5320, 23, 6 } /* IEEE 802.11a, channels 52..64 */, - { 5745, 5825, 30, 6 } /* IEEE 802.11a, channels 149..165, outdoor */, - { 0 } -}; - -static const struct ieee80211_channel_range ieee80211_mkk_channels[] = { - { 2412, 2472, 20, 6 } /* IEEE 802.11b/g, channels 1..13 */, - { 5170, 5240, 20, 6 } /* IEEE 802.11a, channels 34..48 */, - { 5260, 5320, 20, 6 } /* IEEE 802.11a, channels 52..64 */, - { 0 } -}; - - -static const struct ieee80211_channel_range *channel_range = - ieee80211_fcc_channels; - - -static void ieee80211_unmask_channel(int mode, struct ieee80211_channel *chan) -{ - int i; - - chan->flag = 0; - - for (i = 0; channel_range[i].start_freq; i++) { - const struct ieee80211_channel_range *r = &channel_range[i]; - if (r->start_freq <= chan->freq && r->end_freq >= chan->freq) { - if (ieee80211_regdom == 64 && !ieee80211_japan_5ghz && - chan->freq >= 5260 && chan->freq <= 5320) { - /* - * Skip new channels in Japan since the - * firmware was not marked having been upgraded - * by the vendor. - */ - continue; - } - - if (ieee80211_regdom == 0x10 && - (chan->freq == 5190 || chan->freq == 5210 || - chan->freq == 5230)) { - /* Skip MKK channels when in FCC domain. */ - continue; - } - - chan->flag |= IEEE80211_CHAN_W_SCAN | - IEEE80211_CHAN_W_ACTIVE_SCAN | - IEEE80211_CHAN_W_IBSS; - chan->power_level = r->power_level; - chan->antenna_max = r->antenna_max; - - if (ieee80211_regdom == 64 && - (chan->freq == 5170 || chan->freq == 5190 || - chan->freq == 5210 || chan->freq == 5230)) { - /* - * New regulatory rules in Japan have backwards - * compatibility with old channels in 5.15-5.25 - * GHz band, but the station is not allowed to - * use active scan on these old channels. - */ - chan->flag &= ~IEEE80211_CHAN_W_ACTIVE_SCAN; - } - - if (ieee80211_regdom == 64 && - (chan->freq == 5260 || chan->freq == 5280 || - chan->freq == 5300 || chan->freq == 5320)) { - /* - * IBSS is not allowed on 5.25-5.35 GHz band - * due to radar detection requirements. - */ - chan->flag &= ~IEEE80211_CHAN_W_IBSS; - } - - break; - } - } -} - - -void ieee80211_set_default_regdomain(struct ieee80211_hw_mode *mode) -{ - int c; - for (c = 0; c < mode->num_channels; c++) - ieee80211_unmask_channel(mode->mode, &mode->channels[c]); -} - - -void ieee80211_regdomain_init(void) -{ - if (ieee80211_regdom == 0x40) - channel_range = ieee80211_mkk_channels; -} - |