diff options
Diffstat (limited to 'net/sctp')
| -rw-r--r-- | net/sctp/associola.c | 81 | ||||
| -rw-r--r-- | net/sctp/input.c | 36 | ||||
| -rw-r--r-- | net/sctp/ipv6.c | 2 | ||||
| -rw-r--r-- | net/sctp/output.c | 17 | ||||
| -rw-r--r-- | net/sctp/protocol.c | 3 | ||||
| -rw-r--r-- | net/sctp/sm_sideeffect.c | 26 | ||||
| -rw-r--r-- | net/sctp/sm_statefuns.c | 20 | ||||
| -rw-r--r-- | net/sctp/socket.c | 691 | ||||
| -rw-r--r-- | net/sctp/transport.c | 32 |
9 files changed, 708 insertions, 200 deletions
diff --git a/net/sctp/associola.c b/net/sctp/associola.c index dec68a60477..9d05e13e92f 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -110,7 +110,6 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a asoc->cookie_life.tv_sec = sp->assocparams.sasoc_cookie_life / 1000; asoc->cookie_life.tv_usec = (sp->assocparams.sasoc_cookie_life % 1000) * 1000; - asoc->pmtu = 0; asoc->frag_point = 0; /* Set the association max_retrans and RTO values from the @@ -123,6 +122,25 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a asoc->overall_error_count = 0; + /* Initialize the association's heartbeat interval based on the + * sock configured value. + */ + asoc->hbinterval = msecs_to_jiffies(sp->hbinterval); + + /* Initialize path max retrans value. */ + asoc->pathmaxrxt = sp->pathmaxrxt; + + /* Initialize default path MTU. */ + asoc->pathmtu = sp->pathmtu; + + /* Set association default SACK delay */ + asoc->sackdelay = msecs_to_jiffies(sp->sackdelay); + + /* Set the association default flags controlling + * Heartbeat, SACK delay, and Path MTU Discovery. + */ + asoc->param_flags = sp->param_flags; + /* Initialize the maximum mumber of new data packets that can be sent * in a burst. */ @@ -144,8 +162,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a = 5 * asoc->rto_max; asoc->timeouts[SCTP_EVENT_TIMEOUT_HEARTBEAT] = 0; - asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = - SCTP_DEFAULT_TIMEOUT_SACK; + asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = asoc->sackdelay; asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] = sp->autoclose * HZ; @@ -540,23 +557,46 @@ struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc, sctp_transport_set_owner(peer, asoc); + /* Initialize the peer's heartbeat interval based on the + * association configured value. + */ + peer->hbinterval = asoc->hbinterval; + + /* Set the path max_retrans. */ + peer->pathmaxrxt = asoc->pathmaxrxt; + + /* Initialize the peer's SACK delay timeout based on the + * association configured value. + */ + peer->sackdelay = asoc->sackdelay; + + /* Enable/disable heartbeat, SACK delay, and path MTU discovery + * based on association setting. + */ + peer->param_flags = asoc->param_flags; + /* Initialize the pmtu of the transport. */ - sctp_transport_pmtu(peer); + if (peer->param_flags & SPP_PMTUD_ENABLE) + sctp_transport_pmtu(peer); + else if (asoc->pathmtu) + peer->pathmtu = asoc->pathmtu; + else + peer->pathmtu = SCTP_DEFAULT_MAXSEGMENT; /* If this is the first transport addr on this association, * initialize the association PMTU to the peer's PMTU. * If not and the current association PMTU is higher than the new * peer's PMTU, reset the association PMTU to the new peer's PMTU. */ - if (asoc->pmtu) - asoc->pmtu = min_t(int, peer->pmtu, asoc->pmtu); + if (asoc->pathmtu) + asoc->pathmtu = min_t(int, peer->pathmtu, asoc->pathmtu); else - asoc->pmtu = peer->pmtu; + asoc->pathmtu = peer->pathmtu; SCTP_DEBUG_PRINTK("sctp_assoc_add_peer:association %p PMTU set to " - "%d\n", asoc, asoc->pmtu); + "%d\n", asoc, asoc->pathmtu); - asoc->frag_point = sctp_frag_point(sp, asoc->pmtu); + asoc->frag_point = sctp_frag_point(sp, asoc->pathmtu); /* The asoc->peer.port might not be meaningful yet, but * initialize the packet structure anyway. @@ -574,7 +614,7 @@ struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc, * (for example, implementations MAY use the size of the * receiver advertised window). */ - peer->cwnd = min(4*asoc->pmtu, max_t(__u32, 2*asoc->pmtu, 4380)); + peer->cwnd = min(4*asoc->pathmtu, max_t(__u32, 2*asoc->pathmtu, 4380)); /* At this point, we may not have the receiver's advertised window, * so initialize ssthresh to the default value and it will be set @@ -585,17 +625,6 @@ struct sctp_transport *sctp_assoc_add_peer(struct sctp_association *asoc, peer->partial_bytes_acked = 0; peer->flight_size = 0; - /* By default, enable heartbeat for peer address. */ - peer->hb_allowed = 1; - - /* Initialize the peer's heartbeat interval based on the - * sock configured value. - */ - peer->hb_interval = msecs_to_jiffies(sp->paddrparam.spp_hbinterval); - - /* Set the path max_retrans. */ - peer->max_retrans = sp->paddrparam.spp_pathmaxrxt; - /* Set the transport's RTO.initial value */ peer->rto = asoc->rto_initial; @@ -1155,18 +1184,18 @@ void sctp_assoc_sync_pmtu(struct sctp_association *asoc) /* Get the lowest pmtu of all the transports. */ list_for_each(pos, &asoc->peer.transport_addr_list) { t = list_entry(pos, struct sctp_transport, transports); - if (!pmtu || (t->pmtu < pmtu)) - pmtu = t->pmtu; + if (!pmtu || (t->pathmtu < pmtu)) + pmtu = t->pathmtu; } if (pmtu) { struct sctp_sock *sp = sctp_sk(asoc->base.sk); - asoc->pmtu = pmtu; + asoc->pathmtu = pmtu; asoc->frag_point = sctp_frag_point(sp, pmtu); } SCTP_DEBUG_PRINTK("%s: asoc:%p, pmtu:%d, frag_point:%d\n", - __FUNCTION__, asoc, asoc->pmtu, asoc->frag_point); + __FUNCTION__, asoc, asoc->pathmtu, asoc->frag_point); } /* Should we send a SACK to update our peer? */ @@ -1179,7 +1208,7 @@ static inline int sctp_peer_needs_update(struct sctp_association *asoc) case SCTP_STATE_SHUTDOWN_SENT: if ((asoc->rwnd > asoc->a_rwnd) && ((asoc->rwnd - asoc->a_rwnd) >= - min_t(__u32, (asoc->base.sk->sk_rcvbuf >> 1), asoc->pmtu))) + min_t(__u32, (asoc->base.sk->sk_rcvbuf >> 1), asoc->pathmtu))) return 1; break; default: diff --git a/net/sctp/input.c b/net/sctp/input.c index b24ff2c1aef..238f1bffa68 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -305,18 +305,36 @@ int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb) void sctp_icmp_frag_needed(struct sock *sk, struct sctp_association *asoc, struct sctp_transport *t, __u32 pmtu) { - if (unlikely(pmtu < SCTP_DEFAULT_MINSEGMENT)) { - printk(KERN_WARNING "%s: Reported pmtu %d too low, " - "using default minimum of %d\n", __FUNCTION__, pmtu, - SCTP_DEFAULT_MINSEGMENT); - pmtu = SCTP_DEFAULT_MINSEGMENT; - } + if (sock_owned_by_user(sk) || !t || (t->pathmtu == pmtu)) + return; - if (!sock_owned_by_user(sk) && t && (t->pmtu != pmtu)) { - t->pmtu = pmtu; + if (t->param_flags & SPP_PMTUD_ENABLE) { + if (unlikely(pmtu < SCTP_DEFAULT_MINSEGMENT)) { + printk(KERN_WARNING "%s: Reported pmtu %d too low, " + "using default minimum of %d\n", + __FUNCTION__, pmtu, + SCTP_DEFAULT_MINSEGMENT); + /* Use default minimum segment size and disable + * pmtu discovery on this transport. + */ + t->pathmtu = SCTP_DEFAULT_MINSEGMENT; + t->param_flags = (t->param_flags & ~SPP_HB) | + SPP_PMTUD_DISABLE; + } else { + t->pathmtu = pmtu; + } + + /* Update association pmtu. */ sctp_assoc_sync_pmtu(asoc); - sctp_retransmit(&asoc->outqueue, t, SCTP_RTXR_PMTUD); } + + /* Retransmit with the new pmtu setting. + * Normally, if PMTU discovery is disabled, an ICMP Fragmentation + * Needed will never be sent, but if a message was sent before + * PMTU discovery was disabled that was larger than the PMTU, it + * would not be fragmented, so it must be re-transmitted fragmented. + */ + sctp_retransmit(&asoc->outqueue, t, SCTP_RTXR_PMTUD); } /* diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index fa3be2b8fb5..15c05165c90 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -866,7 +866,7 @@ static int sctp_inet6_supported_addrs(const struct sctp_sock *opt, return 2; } -static struct proto_ops inet6_seqpacket_ops = { +static const struct proto_ops inet6_seqpacket_ops = { .family = PF_INET6, .owner = THIS_MODULE, .release = inet6_release, diff --git a/net/sctp/output.c b/net/sctp/output.c index 93137163346..a40991ef72c 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -234,8 +234,8 @@ sctp_xmit_t sctp_packet_append_chunk(struct sctp_packet *packet, goto finish; pmtu = ((packet->transport->asoc) ? - (packet->transport->asoc->pmtu) : - (packet->transport->pmtu)); + (packet->transport->asoc->pathmtu) : + (packet->transport->pathmtu)); too_big = (psize + chunk_len > pmtu); @@ -482,7 +482,9 @@ int sctp_packet_transmit(struct sctp_packet *packet) if (!dst || (dst->obsolete > 1)) { dst_release(dst); sctp_transport_route(tp, NULL, sctp_sk(sk)); - sctp_assoc_sync_pmtu(asoc); + if (asoc->param_flags & SPP_PMTUD_ENABLE) { + sctp_assoc_sync_pmtu(asoc); + } } nskb->dst = dst_clone(tp->dst); @@ -492,7 +494,10 @@ int sctp_packet_transmit(struct sctp_packet *packet) SCTP_DEBUG_PRINTK("***sctp_transmit_packet*** skb len %d\n", nskb->len); - (*tp->af_specific->sctp_xmit)(nskb, tp, packet->ipfragok); + if (tp->param_flags & SPP_PMTUD_ENABLE) + (*tp->af_specific->sctp_xmit)(nskb, tp, packet->ipfragok); + else + (*tp->af_specific->sctp_xmit)(nskb, tp, 1); out: packet->size = packet->overhead; @@ -577,7 +582,7 @@ static sctp_xmit_t sctp_packet_append_data(struct sctp_packet *packet, * if ((flightsize + Max.Burst * MTU) < cwnd) * cwnd = flightsize + Max.Burst * MTU */ - max_burst_bytes = asoc->max_burst * asoc->pmtu; + max_burst_bytes = asoc->max_burst * asoc->pathmtu; if ((transport->flight_size + max_burst_bytes) < transport->cwnd) { transport->cwnd = transport->flight_size + max_burst_bytes; SCTP_DEBUG_PRINTK("%s: cwnd limited by max_burst: " @@ -622,7 +627,7 @@ static sctp_xmit_t sctp_packet_append_data(struct sctp_packet *packet, * data will fit or delay in hopes of bundling a full * sized packet. */ - if (len < asoc->pmtu - packet->overhead) { + if (len < asoc->pathmtu - packet->overhead) { retval = SCTP_XMIT_NAGLE_DELAY; goto finish; } diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index f775d78aa59..de693b43c8e 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -54,6 +54,7 @@ #include <net/protocol.h> #include <net/ip.h> #include <net/ipv6.h> +#include <net/route.h> #include <net/sctp/sctp.h> #include <net/addrconf.h> #include <net/inet_common.h> @@ -829,7 +830,7 @@ static struct notifier_block sctp_inetaddr_notifier = { }; /* Socket operations. */ -static struct proto_ops inet_seqpacket_ops = { +static const struct proto_ops inet_seqpacket_ops = { .family = PF_INET, .owner = THIS_MODULE, .release = inet_release, /* Needs to be wrapped... */ diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 823947170a3..2d7d8a5db2a 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -157,9 +157,12 @@ static int sctp_gen_sack(struct sctp_association *asoc, int force, { __u32 ctsn, max_tsn_seen; struct sctp_chunk *sack; + struct sctp_transport *trans = asoc->peer.last_data_from; int error = 0; - if (force) + if (force || + (!trans && (asoc->param_flags & SPP_SACKDELAY_DISABLE)) || + (trans && (trans->param_flags & SPP_SACKDELAY_DISABLE))) asoc->peer.sack_needed = 1; ctsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map); @@ -189,7 +192,22 @@ static int sctp_gen_sack(struct sctp_association *asoc, int force, if (!asoc->peer.sack_needed) { /* We will need a SACK for the next packet. */ asoc->peer.sack_needed = 1; - goto out; + + /* Set the SACK delay timeout based on the + * SACK delay for the last transport + * data was received from, or the default + * for the association. + */ + if (trans) + asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = + trans->sackdelay; + else + asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = + asoc->sackdelay; + + /* Restart the SACK timer. */ + sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART, + SCTP_TO(SCTP_EVENT_TIMEOUT_SACK)); } else { if (asoc->a_rwnd > asoc->rwnd) asoc->a_rwnd = asoc->rwnd; @@ -205,7 +223,7 @@ static int sctp_gen_sack(struct sctp_association *asoc, int force, sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_STOP, SCTP_TO(SCTP_EVENT_TIMEOUT_SACK)); } -out: + return error; nomem: error = -ENOMEM; @@ -415,7 +433,7 @@ static void sctp_do_8_2_transport_strike(struct sctp_association *asoc, asoc->overall_error_count++; if (transport->state != SCTP_INACTIVE && - (transport->error_count++ >= transport->max_retrans)) { + (transport->error_count++ >= transport->pathmaxrxt)) { SCTP_DEBUG_PRINTK_IPADDR("transport_strike:association %p", " transport IP: port:%d failed.\n", asoc, diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 475bfb4972d..557a7d90b92 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -900,7 +900,7 @@ sctp_disposition_t sctp_sf_sendbeat_8_3(const struct sctp_endpoint *ep, * HEARTBEAT is sent (see Section 8.3). */ - if (transport->hb_allowed) { + if (transport->param_flags & SPP_HB_ENABLE) { if (SCTP_DISPOSITION_NOMEM == sctp_sf_heartbeat(ep, asoc, type, arg, commands)) @@ -1051,7 +1051,7 @@ sctp_disposition_t sctp_sf_backbeat_8_3(const struct sctp_endpoint *ep, return SCTP_DISPOSITION_DISCARD; } - max_interval = link->hb_interval + link->rto; + max_interval = link->hbinterval + link->rto; /* Check if the timestamp looks valid. */ if (time_after(hbinfo->sent_at, jiffies) || @@ -2691,14 +2691,9 @@ sctp_disposition_t sctp_sf_eat_data_6_2(const struct sctp_endpoint *ep, * document allow. However, an SCTP transmitter MUST NOT be * more aggressive than the following algorithms allow. */ - if (chunk->end_of_packet) { + if (chunk->end_of_packet) sctp_add_cmd_sf(commands, SCTP_CMD_GEN_SACK, SCTP_NOFORCE()); - /* Start the SACK timer. */ - sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART, - SCTP_TO(SCTP_EVENT_TIMEOUT_SACK)); - } - return SCTP_DISPOSITION_CONSUME; discard_force: @@ -2721,13 +2716,9 @@ discard_force: return SCTP_DISPOSITION_DISCARD; discard_noforce: - if (chunk->end_of_packet) { + if (chunk->end_of_packet) sctp_add_cmd_sf(commands, SCTP_CMD_GEN_SACK, SCTP_NOFORCE()); - /* Start the SACK timer. */ - sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART, - SCTP_TO(SCTP_EVENT_TIMEOUT_SACK)); - } return SCTP_DISPOSITION_DISCARD; consume: return SCTP_DISPOSITION_CONSUME; @@ -3442,9 +3433,6 @@ sctp_disposition_t sctp_sf_eat_fwd_tsn(const struct sctp_endpoint *ep, * send another. */ sctp_add_cmd_sf(commands, SCTP_CMD_GEN_SACK, SCTP_NOFORCE()); - /* Start the SACK timer. */ - sctp_add_cmd_sf(commands, SCTP_CMD_TIMER_RESTART, - SCTP_TO(SCTP_EVENT_TIMEOUT_SACK)); return SCTP_DISPOSITION_CONSUME; diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 9df888e932c..fc04d185fa3 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1941,107 +1941,379 @@ static int sctp_setsockopt_autoclose(struct sock *sk, char __user *optval, * address's parameters: * * struct sctp_paddrparams { - * sctp_assoc_t spp_assoc_id; - * struct sockaddr_storage spp_address; - * uint32_t spp_hbinterval; - * uint16_t spp_pathmaxrxt; - * }; - * - * spp_assoc_id - (UDP style socket) This is filled in the application, - * and identifies the association for this query. + * sctp_assoc_t spp_assoc_id; + * struct sockaddr_storage spp_address; + * uint32_t spp_hbinterval; + * uint16_t spp_pathmaxrxt; + * uint32_t spp_pathmtu; + * uint32_t spp_sackdelay; + * uint32_t spp_flags; + * }; + * + * spp_assoc_id - (one-to-many style socket) This is filled in the + * application, and identifies the association for + * this query. * spp_address - This specifies which address is of interest. * spp_hbinterval - This contains the value of the heartbeat interval, - * in milliseconds. A value of 0, when modifying the - * parameter, specifies that the heartbeat on this - * address should be disabled. A value of UINT32_MAX - * (4294967295), when modifying the parameter, - * specifies that a heartbeat should be sent - * immediately to the peer address, and the current - * interval should remain unchanged. + * in milliseconds. If a value of zero + * is present in this field then no changes are to + * be made to this parameter. * spp_pathmaxrxt - This contains the maximum number of * retransmissions before this address shall be - * considered unreachable. + * considered unreachable. If a value of zero + * is present in this field then no changes are to + * be made to this parameter. + * spp_pathmtu - When Path MTU discovery is disabled the value + * specified here will be the "fixed" path mtu. + * Note that if the spp_address field is empty + * then all associations on this address will + * have this fixed path mtu set upon them. + * + * spp_sackdelay - When delayed sack is enabled, this value specifies + * the number of milliseconds that sacks will be delayed + * for. This value will apply to all addresses of an + * association if the spp_address field is empty. Note + * also, that if delayed sack is enabled and this + * value is set to 0, no change is made to the last + * recorded delayed sack timer value. + * + * spp_flags - These flags are used to control various features + * on an association. The flag field may contain + * zero or more of the following options. + * + * SPP_HB_ENABLE - Enable heartbeats on the + * specified address. Note that if the address + * field is empty all addresses for the association + * have heartbeats enabled upon them. + * + * SPP_HB_DISABLE - Disable heartbeats on the + * speicifed address. Note that if the address + * field is empty all addresses for the association + * will have their heartbeats disabled. Note also + * that SPP_HB_ENABLE and SPP_HB_DISABLE are + * mutually exclusive, only one of these two should + * be specified. Enabling both fields will have + * undetermined results. + * + * SPP_HB_DEMAND - Request a user initiated heartbeat + * to be made immediately. + * + * SPP_PMTUD_ENABLE - This field will enable PMTU + * discovery upon the specified address. Note that + * if the address feild is empty then all addresses + * on the association are effected. + * + * SPP_PMTUD_DISABLE - This field will disable PMTU + * discovery upon the specified address. Note that + * if the address feild is empty then all addresses + * on the association are effected. Not also that + * SPP_PMTUD_ENABLE and SPP_PMTUD_DISABLE are mutually + * exclusive. Enabling both will have undetermined + * results. + * + * SPP_SACKDELAY_ENABLE - Setting this flag turns + * on delayed sack. The time specified in spp_sackdelay + * is used to specify the sack delay for this address. Note + * that if spp_address is empty then all addresses will + * enable delayed sack and take on the sack delay + * value specified in spp_sackdelay. + * SPP_SACKDELAY_DISABLE - Setting this flag turns + * off delayed sack. If the spp_address field is blank then + * delayed sack is disabled for the entire association. Note + * also that this field is mutually exclusive to + * SPP_SACKDELAY_ENABLE, setting both will have undefined + * results. */ +int sctp_apply_peer_addr_params(struct sctp_paddrparams *params, + struct sctp_transport *trans, + struct sctp_association *asoc, + struct sctp_sock *sp, + int hb_change, + int pmtud_change, + int sackdelay_change) +{ + int error; + + if (params->spp_flags & SPP_HB_DEMAND && trans) { + error = sctp_primitive_REQUESTHEARTBEAT (trans->asoc, trans); + if (error) + return error; + } + + if (params->spp_hbinterval) { + if (trans) { + trans->hbinterval = msecs_to_jiffies(params->spp_hbinterval); + } else if (asoc) { + asoc->hbinterval = msecs_to_jiffies(params->spp_hbinterval); + } else { + sp->hbinterval = params->spp_hbinterval; + } + } + + if (hb_change) { + if (trans) { + trans->param_flags = + (trans->param_flags & ~SPP_HB) | hb_change; + } else if (asoc) { + asoc->param_flags = + (asoc->param_flags & ~SPP_HB) | hb_change; + } else { + sp->param_flags = + (sp->param_flags & ~SPP_HB) | hb_change; + } + } + + if (params->spp_pathmtu) { + if (trans) { + trans->pathmtu = params->spp_pathmtu; + sctp_assoc_sync_pmtu(asoc); + } else if (asoc) { + asoc->pathmtu = params->spp_pathmtu; + sctp_frag_point(sp, params->spp_pathmtu); + } else { + sp->pathmtu = params->spp_pathmtu; + } + } + + if (pmtud_change) { + if (trans) { + int update = (trans->param_flags & SPP_PMTUD_DISABLE) && + (params->spp_flags & SPP_PMTUD_ENABLE); + trans->param_flags = + (trans->param_flags & ~SPP_PMTUD) | pmtud_change; + if (update) { + sctp_transport_pmtu(trans); + sctp_assoc_sync_pmtu(asoc); + } + } else if (asoc) { + asoc->param_flags = + (asoc->param_flags & ~SPP_PMTUD) | pmtud_change; + } else { + sp->param_flags = + (sp->param_flags & ~SPP_PMTUD) | pmtud_change; + } + } + + if (params->spp_sackdelay) { + if (trans) { + trans->sackdelay = + msecs_to_jiffies(params->spp_sackdelay); + } else if (asoc) { + asoc->sackdelay = + msecs_to_jiffies(params->spp_sackdelay); + } else { + sp->sackdelay = params->spp_sackdelay; + } + } + + if (sackdelay_change) { + if (trans) { + trans->param_flags = + (trans->param_flags & ~SPP_SACKDELAY) | + sackdelay_change; + } else if (asoc) { + asoc->param_flags = + (asoc->param_flags & ~SPP_SACKDELAY) | + sackdelay_change; + } else { + sp->param_flags = + (sp->param_flags & ~SPP_SACKDELAY) | + sackdelay_change; + } + } + + if (params->spp_pathmaxrxt) { + if (trans) { + trans->pathmaxrxt = params->spp_pathmaxrxt; + } else if (asoc) { + asoc->pathmaxrxt = params->spp_pathmaxrxt; + } else { + sp->pathmaxrxt = params->spp_pathmaxrxt; + } + } + + return 0; +} + static int sctp_setsockopt_peer_addr_params(struct sock *sk, char __user *optval, int optlen) { - struct sctp_paddrparams params; - struct sctp_transport *trans; + struct sctp_paddrparams params; + struct sctp_transport *trans = NULL; + struct sctp_association *asoc = NULL; + struct sctp_sock *sp = sctp_sk(sk); int error; + int hb_change, pmtud_change, sackdelay_change; if (optlen != sizeof(struct sctp_paddrparams)) - return -EINVAL; + return - EINVAL; + if (copy_from_user(¶ms, optval, optlen)) return -EFAULT; - /* - * API 7. Socket Options (setting the default value for the endpoint) - * All options that support specific settings on an association by - * filling in either an association id variable or a sockaddr_storage - * SHOULD also support setting of the same value for the entire endpoint - * (i.e. future associations). To accomplish this the following logic is - * used when setting one of these options: - - * c) If neither the sockaddr_storage or association identification is - * set i.e. the sockaddr_storage is set to all 0's (INADDR_ANY) and - * the association identification is 0, the settings are a default - * and to be applied to the endpoint (all future associations). - */ + /* Validate flags and value parameters. */ + hb_change = params.spp_flags & SPP_HB; + pmtud_change = params.spp_flags & SPP_PMTUD; + sackdelay_change = params.spp_flags & SPP_SACKDELAY; + + if (hb_change == SPP_HB || + pmtud_change == SPP_PMTUD || + sackdelay_change == SPP_SACKDELAY || + params.spp_sackdelay > 500 || + (params.spp_pathmtu + && params.spp_pathmtu < SCTP_DEFAULT_MINSEGMENT)) + return -EINVAL; - /* update default value for endpoint (all future associations) */ - if (!params.spp_assoc_id && - sctp_is_any(( union sctp_addr *)¶ms.spp_address)) { - /* Manual heartbeat on an endpoint is invalid. */ - if (0xffffffff == params.spp_hbinterval) + /* If an address other than INADDR_ANY is specified, and + * no transport is found, then the request is invalid. + */ + if (!sctp_is_any(( union sctp_addr *)¶ms.spp_address)) { + trans = sctp_addr_id2transport(sk, ¶ms.spp_address, + params.spp_assoc_id); + if (!trans) return -EINVAL; - else if (params.spp_hbinterval) - sctp_sk(sk)->paddrparam.spp_hbinterval = - params.spp_hbinterval; - if (params.spp_pathmaxrxt) - sctp_sk(sk)->paddrparam.spp_pathmaxrxt = - params.spp_pathmaxrxt; - return 0; } - trans = sctp_addr_id2transport(sk, ¶ms.spp_address, - params.spp_assoc_id); - if (!trans) + /* Get association, if assoc_id != 0 and the socket is a one + * to many style socket, and an association was not found, then + * the id was invalid. + */ + asoc = sctp_id2assoc(sk, params.spp_assoc_id); + if (!asoc && params.spp_assoc_id && sctp_style(sk, UDP)) return -EINVAL; - /* Applications can enable or disable heartbeats for any peer address - * of an association, modify an address's heartbeat interval, force a - * heartbeat to be sent immediately, and adjust the address's maximum - * number of retransmissions sent before an address is considered - * unreachable. - * - * The value of the heartbeat interval, in milliseconds. A value of - * UINT32_MAX (4294967295), when modifying the parameter, specifies - * that a heartbeat should be sent immediately to the peer address, - * and the current interval should remain unchanged. + /* Heartbeat demand can only be sent on a transport or + * association, but not a socket. */ - if (0xffffffff == params.spp_hbinterval) { - error = sctp_primitive_REQUESTHEARTBEAT (trans->asoc, trans); - if (error) - return error; - } else { - /* The value of the heartbeat interval, in milliseconds. A value of 0, - * when modifying the parameter, specifies that the heartbeat on this - * address should be disabled. + if (params.spp_flags & SPP_HB_DEMAND && !trans && !asoc) + return -EINVAL; + + /* Process parameters. */ + error = sctp_apply_peer_addr_params(¶ms, trans, asoc, sp, + hb_change, pmtud_change, + sackdelay_change); + + if (error) + return error; + + /* If changes are for association, also apply parameters to each + * transport. */ - if (params.spp_hbinterval) { - trans->hb_allowed = 1; - trans->hb_interval = - msecs_to_jiffies(params.spp_hbinterval); - } else - trans->hb_allowed = 0; + if (!trans && asoc) { + struct list_head *pos; + + list_for_each(pos, &asoc->peer.transport_addr_list) { + trans = list_entry(pos, struct sctp_transport, + transports); + sctp_apply_peer_addr_params(¶ms, trans, asoc, sp, + hb_change, pmtud_change, + sackdelay_change); + } } - /* spp_pathmaxrxt contains the maximum number of retransmissions - * before this address shall be considered unreachable. - */ - if (params.spp_pathmaxrxt) - trans->max_retrans = params.spp_pathmaxrxt; + return 0; +} + +/* 7.1.24. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME) + * + * This options will get or set the delayed ack timer. The time is set + * in milliseconds. If the assoc_id is 0, then this sets or gets the + * endpoints default delayed ack timer value. If the assoc_id field is + * non-zero, then the set or get effects the specified association. + * + * struct sctp_assoc_value { + * sctp_assoc_t assoc_id; + * uint32_t assoc_value; + * }; + * + * assoc_id - This parameter, indicates which association the + * user is preforming an action upon. Note that if + * this field's value is zero then the endpoints + * default value is changed (effecting future + * associations only). + * + * assoc_value - This parameter contains the number of milliseconds + * that the user is requesting the delayed ACK timer + * be set to. Note that this value is defined in + * the standard to be between 200 and 500 milliseconds. + * + * Note: a value of zero will leave the value alone, + * but disable SACK delay. A non-zero value will also + * enable SACK delay. + */ +static int sctp_setsockopt_delayed_ack_time(struct sock *sk, + char __user *optval, int optlen) +{ + struct sctp_assoc_value params; + struct sctp_transport *trans = NULL; + struct sctp_association *asoc = NULL; + struct sctp_sock *sp = sctp_sk(sk); + + if (optlen != sizeof(struct sctp_assoc_value)) + return - EINVAL; + + if (copy_from_user(¶ms, optval, optlen)) + return -EFAULT; + + /* Validate value parameter. */ + if (params.assoc_value > 500) + return -EINVAL; + + /* Get association, if assoc_id != 0 and the socket is a one + * to many style socket, and an association was not found, then + * the id was invalid. + */ + asoc = sctp_id2assoc(sk, params.assoc_id); + if (!asoc && params.assoc_id && sctp_style(sk, UDP)) + return -EINVAL; + + if (params.assoc_value) { + if (asoc) { + asoc->sackdelay = + msecs_to_jiffies(params.assoc_value); + asoc->param_flags = + (asoc->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_ENABLE; + } else { + sp->sackdelay = params.assoc_value; + sp->param_flags = + (sp->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_ENABLE; + } + } else { + if (asoc) { + asoc->param_flags = + (asoc->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_DISABLE; + } else { + sp->param_flags = + (sp->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_DISABLE; + } + } + + /* If change is for association, also apply to each transport. */ + if (asoc) { + struct list_head *pos; + + list_for_each(pos, &asoc->peer.transport_addr_list) { + trans = list_entry(pos, struct sctp_transport, + transports); + if (params.assoc_value) { + trans->sackdelay = + msecs_to_jiffies(params.assoc_value); + trans->param_flags = + (trans->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_ENABLE; + } else { + trans->param_flags = + (trans->param_flags & ~SPP_SACKDELAY) | + SPP_SACKDELAY_DISABLE; + } + } + } + return 0; } @@ -2334,7 +2606,7 @@ static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, int optl /* Update the frag_point of the existing associations. */ list_for_each(pos, &(sp->ep->asocs)) { asoc = list_entry(pos, struct sctp_association, asocs); - asoc->frag_point = sctp_frag_point(sp, asoc->pmtu); + asoc->frag_point = sctp_frag_point(sp, asoc->pathmtu); } return 0; @@ -2491,6 +2763,10 @@ SCTP_STATIC int sctp_setsockopt(struct sock *sk, int level, int optname, retval = sctp_setsockopt_peer_addr_params(sk, optval, optlen); break; + case SCTP_DELAYED_ACK_TIME: + retval = sctp_setsockopt_delayed_ack_time(sk, optval, optlen); + break; + case SCTP_INITMSG: retval = sctp_setsockopt_initmsg(sk, optval, optlen); break; @@ -2715,8 +2991,13 @@ SCTP_STATIC int sctp_init_sock(struct sock *sk) /* Default Peer Address Parameters. These defaults can * be modified via SCTP_PEER_ADDR_PARAMS */ - sp->paddrparam.spp_hbinterval = jiffies_to_msecs(sctp_hb_interval); - sp->paddrparam.spp_pathmaxrxt = sctp_max_retrans_path; + sp->hbinterval = jiffies_to_msecs(sctp_hb_interval); + sp->pathmaxrxt = sctp_max_retrans_path; + sp->pathmtu = 0; // allow default discovery + sp->sackdelay = sctp_sack_timeout; + sp->param_flags = SPP_HB_ENABLE | + SPP_PMTUD_ENABLE | + SPP_SACKDELAY_ENABLE; /* If enabled no SCTP message fragmentation will be performed. * Configure through SCTP_DISABLE_FRAGMENTS socket option. @@ -2865,7 +3146,7 @@ static int sctp_getsockopt_sctp_status(struct sock *sk, int len, status.sstat_primary.spinfo_cwnd = transport->cwnd; status.sstat_primary.spinfo_srtt = transport->srtt; status.sstat_primary.spinfo_rto = jiffies_to_msecs(transport->rto); - status.sstat_primary.spinfo_mtu = transport->pmtu; + status.sstat_primary.spinfo_mtu = transport->pathmtu; if (status.sstat_primary.spinfo_state == SCTP_UNKNOWN) status.sstat_primary.spinfo_state = SCTP_ACTIVE; @@ -2924,7 +3205,7 @@ static int sctp_getsockopt_peer_addr_info(struct sock *sk, int len, pinfo.spinfo_cwnd = transport->cwnd; pinfo.spinfo_srtt = transport->srtt; pinfo.spinfo_rto = jiffies_to_msecs(transport->rto); - pinfo.spinfo_mtu = transport->pmtu; + pinfo.spinfo_mtu = transport->pathmtu; if (pinfo.spinfo_state == SCTP_UNKNOWN) pinfo.spinfo_state = SCTP_ACTIVE; @@ -3086,69 +3367,227 @@ out: * address's parameters: * * struct sctp_paddrparams { - * sctp_assoc_t spp_assoc_id; - * struct sockaddr_storage spp_address; - * uint32_t spp_hbinterval; - * uint16_t spp_pathmaxrxt; - * }; - * - * spp_assoc_id - (UDP style socket) This is filled in the application, - * and identifies the association for this query. + * sctp_assoc_t spp_assoc_id; + * struct sockaddr_storage spp_address; + * uint32_t spp_hbinterval; + * uint16_t spp_pathmaxrxt; + * uint32_t spp_pathmtu; + * uint32_t spp_sackdelay; + * uint32_t spp_flags; + * }; + * + * spp_assoc_id - (one-to-many style socket) This is filled in the + * application, and identifies the association for + * this query. * spp_address - This specifies which address is of interest. * spp_hbinterval - This contains the value of the heartbeat interval, - * in milliseconds. A value of 0, when modifying the - * parameter, specifies that the heartbeat on this - * address should be disabled. A value of UINT32_MAX - * (4294967295), when modifying the parameter, - * specifies that a heartbeat should be sent - * immediately to the peer address, and the current - * interval should remain unchanged. + * in milliseconds. If a value of zero + * is present in this field then no changes are to + * be made to this parameter. * spp_pathmaxrxt - This contains the maximum number of * retransmissions before this address shall be - * considered unreachable. + * considered unreachable. If a value of zero + * is present in this field then no changes are to + * be made to this parameter. + * spp_pathmtu - When Path MTU discovery is disabled the value + * specified here will be the "fixed" path mtu. + * Note that if the spp_address field is empty + * then all associations on this address will + * have this fixed path mtu set upon them. + * + * spp_sackdelay - When delayed sack is enabled, this value specifies + * the number of milliseconds that sacks will be delayed + * for. This value will apply to all addresses of an + * association if the spp_address field is empty. Note + * also, that if delayed sack is enabled and this + * value is set to 0, no change is made to the last + * recorded delayed sack timer value. + * + * spp_flags - These flags are used to control various features + * on an association. The flag field may contain + * zero or more of the following options. + * + * SPP_HB_ENABLE - Enable heartbeats on the + * specified address. Note that if the address + * field is empty all addresses for the association + * have heartbeats enabled upon them. + * + * SPP_HB_DISABLE - Disable heartbeats on the + * speicifed address. Note that if the address + * field is empty all addresses for the association + * will have their heartbeats disabled. Note also + * that SPP_HB_ENABLE and SPP_HB_DISABLE are + * mutually exclusive, only one of these two should + * be specified. Enabling both fields will have + * undetermined results. + * + * SPP_HB_DEMAND - Request a user initiated heartbeat + * to be made immediately. + * + * SPP_PMTUD_ENABLE - This field will enable PMTU + * discovery upon the specified address. Note that + * if the address feild is empty then all addresses + * on the association are effected. + * + * SPP_PMTUD_DISABLE - This field will disable PMTU + * discovery upon the specified address. Note that + * if the address feild is empty then all addresses + * on the association are effected. Not also that + * SPP_PMTUD_ENABLE and SPP_PMTUD_DISABLE are mutually + * exclusive. Enabling both will have undetermined + * results. + * + * SPP_SACKDELAY_ENABLE - Setting this flag turns + * on delayed sack. The time specified in spp_sackdelay + * is used to specify the sack delay for this address. Note + * that if spp_address is empty then all addresses will + * enable delayed sack and take on the sack delay + * value specified in spp_sackdelay. + * SPP_SACKDELAY_DISABLE - Setting this flag turns + * off delayed sack. If the spp_address field is blank then + * delayed sack is disabled for the entire association. Note + * also that this field is mutually exclusive to + * SPP_SACKDELAY_ENABLE, setting both will have undefined + * results. */ static int sctp_getsockopt_peer_addr_params(struct sock *sk, int len, - char __user *optval, int __user *optlen) + char __user *optval, int __user *optlen) { - struct sctp_paddrparams params; - struct sctp_transport *trans; + struct sctp_paddrparams params; + struct sctp_transport *trans = NULL; + struct sctp_association *asoc = NULL; + struct sctp_sock *sp = sctp_sk(sk); if (len != sizeof(struct sctp_paddrparams)) return -EINVAL; + if (copy_from_user(¶ms, optval, len)) return -EFAULT; - /* If no association id is specified retrieve the default value - * for the endpoint that will be used for all future associations + /* If an address other than INADDR_ANY is specified, and + * no transport is found, then the request is invalid. */ - if (!params.spp_assoc_id && - sctp_is_any(( union sctp_addr *)¶ms.spp_address)) { - params.spp_hbinterval = sctp_sk(sk)->paddrparam.spp_hbinterval; - params.spp_pathmaxrxt = sctp_sk(sk)->paddrparam.spp_pathmaxrxt; - - goto done; + if (!sctp_is_any(( union sctp_addr *)¶ms.spp_address)) { + trans = sctp_addr_id2transport(sk, ¶ms.spp_address, + params.spp_assoc_id); + if (!trans) { + SCTP_DEBUG_PRINTK("Failed no transport\n"); + return -EINVAL; + } } - trans = sctp_addr_id2transport(sk, ¶ms.spp_address, - params.spp_assoc_id); - if (!trans) + /* Get association, if assoc_id != 0 and the socket is a one + * to many style socket, and an association was not found, then + * the id was invalid. + */ + asoc = sctp_id2assoc(sk, params.spp_assoc_id); + if (!asoc && params.spp_assoc_id && sctp_style(sk, UDP)) { + SCTP_DEBUG_PRINTK("Failed no association\n"); return -EINVAL; + } - /* The value of the heartbeat interval, in milliseconds. A value of 0, - * when modifying the parameter, specifies that the heartbeat on this - * address should be disabled. - */ - if (!trans->hb_allowed) - params.spp_hbinterval = 0; - else - params.spp_hbinterval = jiffies_to_msecs(trans->hb_interval); + if (trans) { + /* Fetch transport values. */ + params.spp_hbinterval = jiffies_to_msecs(trans->hbinterval); + params.spp_pathmtu = trans->pathmtu; + params.spp_pathmaxrxt = trans->pathmaxrxt; + params.spp_sackdelay = jiffies_to_msecs(trans->sackdelay); + + /*draft-11 doesn't say what to return in spp_flags*/ + params.spp_flags = trans->param_flags; + } else if (asoc) { + /* Fetch association values. */ + params.spp_hbinterval = jiffies_to_msecs(asoc->hbinterval); + params.spp_pathmtu = asoc->pathmtu; + params.spp_pathmaxrxt = asoc->pathmaxrxt; + params.spp_sackdelay = jiffies_to_msecs(asoc->sackdelay); + + /*draft-11 doesn't say what to return in spp_flags*/ + params.spp_flags = asoc->param_flags; + } else { + /* Fetch socket values. */ + params.spp_hbinterval = sp->hbinterval; + params.spp_pathmtu = sp->pathmtu; + params.spp_sackdelay = sp->sackdelay; + params.spp_pathmaxrxt = sp->pathmaxrxt; + + /*draft-11 doesn't say what to return in spp_flags*/ + params.spp_flags = sp->param_flags; + } - /* spp_pathmaxrxt contains the maximum number of retransmissions - * before this address shall be considered unreachable. - */ - params.spp_pathmaxrxt = trans->max_retrans; + if (copy_to_user(optval, ¶ms, len)) + return -EFAULT; + + if (put_user(len, optlen)) + return -EFAULT; + + return 0; +} + +/* 7.1.24. Delayed Ack Timer (SCTP_DELAYED_ACK_TIME) + * + * This options will get or set the delayed ack timer. The time is set + * in milliseconds. If the assoc_id is 0, then this sets or gets the + * endpoints default delayed ack timer value. If the assoc_id field is + * non-zero, then the set or get effects the specified association. + * + * struct sctp_assoc_value { + * sctp_assoc_t assoc_id; + * uint32_t assoc_value; + * }; + * + * assoc_id - This parameter, indicates which association the + * user is preforming an action upon. Note that if + * this field's value is zero then the endpoints + * default value is changed (effecting future + * associations only). + * + * assoc_value - This parameter contains the number of milliseconds + * that the user is requesting the delayed ACK timer + * be set to. Note that this value is defined in + * the standard to be between 200 and 500 milliseconds. + * + * Note: a value of zero will leave the value alone, + * but disable SACK delay. A non-zero value will also + * enable SACK delay. + */ +static int sctp_getsockopt_delayed_ack_time(struct sock *sk, int len, + char __user *optval, + int __user *optlen) +{ + struct sctp_assoc_value params; + struct sctp_association *asoc = NULL; + struct sctp_sock *sp = sctp_sk(sk); + + if (len != sizeof(struct sctp_assoc_value)) + return - EINVAL; + + if (copy_from_user(¶ms, optval, len)) + return -EFAULT; + + /* Get association, if assoc_id != 0 and the socket is a one + * to many style socket, and an association was not found, then + * the id was invalid. + */ + asoc = sctp_id2assoc(sk, params.assoc_id); + if (!asoc && params.assoc_id && sctp_style(sk, UDP)) + return -EINVAL; + + if (asoc) { + /* Fetch association values. */ + if (asoc->param_flags & SPP_SACKDELAY_ENABLE) + params.assoc_value = jiffies_to_msecs( + asoc->sackdelay); + else + params.assoc_value = 0; + } else { + /* Fetch socket values. */ + if (sp->param_flags & SPP_SACKDELAY_ENABLE) + params.assoc_value = sp->sackdelay; + else + params.assoc_value = 0; + } -done: if (copy_to_user(optval, ¶ms, len)) return -EFAULT; @@ -4015,6 +4454,10 @@ SCTP_STATIC int sctp_getsockopt(struct sock *sk, int level, int optname, retval = sctp_getsockopt_peer_addr_params(sk, len, optval, optlen); break; + case SCTP_DELAYED_ACK_TIME: + retval = sctp_getsockopt_delayed_ack_time(sk, len, optval, + optlen); + break; case SCTP_INITMSG: retval = sctp_getsockopt_initmsg(sk, len, optval, optlen); break; diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 268ddaf2dc0..68d73e2dd15 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -86,10 +86,13 @@ static struct sctp_transport *sctp_transport_init(struct sctp_transport *peer, peer->init_sent_count = 0; peer->state = SCTP_ACTIVE; - peer->hb_allowed = 0; + peer->param_flags = SPP_HB_DISABLE | + SPP_PMTUD_ENABLE | + SPP_SACKDELAY_ENABLE; + peer->hbinterval = 0; /* Initialize the default path max_retrans. */ - peer->max_retrans = sctp_max_retrans_path; + peer->pathmaxrxt = sctp_max_retrans_path; peer->error_count = 0; INIT_LIST_HEAD(&peer->transmitted); @@ -229,10 +232,10 @@ void sctp_transport_pmtu(struct sctp_transport *transport) dst = transport->af_specific->get_dst(NULL, &transport->ipaddr, NULL); if (dst) { - transport->pmtu = dst_mtu(dst); + transport->pathmtu = dst_mtu(dst); dst_release(dst); } else - transport->pmtu = SCTP_DEFAULT_MAXSEGMENT; + transport->pathmtu = SCTP_DEFAULT_MAXSEGMENT; } /* Caches the dst entry and source address for a transport's destination @@ -254,8 +257,11 @@ void sctp_transport_route(struct sctp_transport *transport, af->get_saddr(asoc, dst, daddr, &transport->saddr); transport->dst = dst; + if ((transport->param_flags & SPP_PMTUD_DISABLE) && transport->pathmtu) { + return; + } if (dst) { - transport->pmtu = dst_mtu(dst); + transport->pathmtu = dst_mtu(dst); /* Initialize sk->sk_rcv_saddr, if the transport is the * association's active path for getsockname(). @@ -264,7 +270,7 @@ void sctp_transport_route(struct sctp_transport *transport, opt->pf->af->to_sk_saddr(&transport->saddr, asoc->base.sk); } else - transport->pmtu = SCTP_DEFAULT_MAXSEGMENT; + transport->pathmtu = SCTP_DEFAULT_MAXSEGMENT; } /* Hold a reference to a transport. */ @@ -369,7 +375,7 @@ void sctp_transport_raise_cwnd(struct sctp_transport *transport, ssthresh = transport->ssthresh; pba = transport->partial_bytes_acked; - pmtu = transport->asoc->pmtu; + pmtu = transport->asoc->pathmtu; if (cwnd <= ssthresh) { /* RFC 2960 7.2.1, sctpimpguide-05 2.14.2 When cwnd is less @@ -441,8 +447,8 @@ void sctp_transport_lower_cwnd(struct sctp_transport *transport, * partial_bytes_acked = 0 */ transport->ssthresh = max(transport->cwnd/2, - 4*transport->asoc->pmtu); - transport->cwnd = transport->asoc->pmtu; + 4*transport->asoc->pathmtu); + transport->cwnd = transport->asoc->pathmtu; break; case SCTP_LOWER_CWND_FAST_RTX: @@ -459,7 +465,7 @@ void sctp_transport_lower_cwnd(struct sctp_transport *transport, * partial_bytes_acked = 0 */ transport->ssthresh = max(transport->cwnd/2, - 4*transport->asoc->pmtu); + 4*transport->asoc->pathmtu); transport->cwnd = transport->ssthresh; break; @@ -479,7 +485,7 @@ void sctp_transport_lower_cwnd(struct sctp_transport *transport, if ((jiffies - transport->last_time_ecne_reduced) > transport->rtt) { transport->ssthresh = max(transport->cwnd/2, - 4*transport->asoc->pmtu); + 4*transport->asoc->pathmtu); transport->cwnd = transport->ssthresh; transport->last_time_ecne_reduced = jiffies; } @@ -496,7 +502,7 @@ void sctp_transport_lower_cwnd(struct sctp_transport *transport, */ if ((jiffies - transport->last_time_used) > transport->rto) transport->cwnd = max(transport->cwnd/2, - 4*transport->asoc->pmtu); + 4*transport->asoc->pathmtu); break; }; @@ -511,7 +517,7 @@ void sctp_transport_lower_cwnd(struct sctp_transport *transport, unsigned long sctp_transport_timeout(struct sctp_transport *t) { unsigned long timeout; - timeout = t->hb_interval + t->rto + sctp_jitter(t->rto); + timeout = t->hbinterval + t->rto + sctp_jitter(t->rto); timeout += jiffies; return timeout; } |