diff options
Diffstat (limited to 'sound/mips/hal2.h')
| -rw-r--r-- | sound/mips/hal2.h | 245 |
1 files changed, 245 insertions, 0 deletions
diff --git a/sound/mips/hal2.h b/sound/mips/hal2.h new file mode 100644 index 00000000000..f19828bc64e --- /dev/null +++ b/sound/mips/hal2.h @@ -0,0 +1,245 @@ +#ifndef __HAL2_H +#define __HAL2_H + +/* + * Driver for HAL2 sound processors + * Copyright (c) 1999 Ulf Carlsson <ulfc@bun.falkenberg.se> + * Copyright (c) 2001, 2002, 2003 Ladislav Michl <ladis@linux-mips.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/types.h> + +/* Indirect status register */ + +#define H2_ISR_TSTATUS 0x01 /* RO: transaction status 1=busy */ +#define H2_ISR_USTATUS 0x02 /* RO: utime status bit 1=armed */ +#define H2_ISR_QUAD_MODE 0x04 /* codec mode 0=indigo 1=quad */ +#define H2_ISR_GLOBAL_RESET_N 0x08 /* chip global reset 0=reset */ +#define H2_ISR_CODEC_RESET_N 0x10 /* codec/synth reset 0=reset */ + +/* Revision register */ + +#define H2_REV_AUDIO_PRESENT 0x8000 /* RO: audio present 0=present */ +#define H2_REV_BOARD_M 0x7000 /* RO: bits 14:12, board revision */ +#define H2_REV_MAJOR_CHIP_M 0x00F0 /* RO: bits 7:4, major chip revision */ +#define H2_REV_MINOR_CHIP_M 0x000F /* RO: bits 3:0, minor chip revision */ + +/* Indirect address register */ + +/* + * Address of indirect internal register to be accessed. A write to this + * register initiates read or write access to the indirect registers in the + * HAL2. Note that there af four indirect data registers for write access to + * registers larger than 16 byte. + */ + +#define H2_IAR_TYPE_M 0xF000 /* bits 15:12, type of functional */ + /* block the register resides in */ + /* 1=DMA Port */ + /* 9=Global DMA Control */ + /* 2=Bresenham */ + /* 3=Unix Timer */ +#define H2_IAR_NUM_M 0x0F00 /* bits 11:8 instance of the */ + /* blockin which the indirect */ + /* register resides */ + /* If IAR_TYPE_M=DMA Port: */ + /* 1=Synth In */ + /* 2=AES In */ + /* 3=AES Out */ + /* 4=DAC Out */ + /* 5=ADC Out */ + /* 6=Synth Control */ + /* If IAR_TYPE_M=Global DMA Control: */ + /* 1=Control */ + /* If IAR_TYPE_M=Bresenham: */ + /* 1=Bresenham Clock Gen 1 */ + /* 2=Bresenham Clock Gen 2 */ + /* 3=Bresenham Clock Gen 3 */ + /* If IAR_TYPE_M=Unix Timer: */ + /* 1=Unix Timer */ +#define H2_IAR_ACCESS_SELECT 0x0080 /* 1=read 0=write */ +#define H2_IAR_PARAM 0x000C /* Parameter Select */ +#define H2_IAR_RB_INDEX_M 0x0003 /* Read Back Index */ + /* 00:word0 */ + /* 01:word1 */ + /* 10:word2 */ + /* 11:word3 */ +/* + * HAL2 internal addressing + * + * The HAL2 has "indirect registers" (idr) which are accessed by writing to the + * Indirect Data registers. Write the address to the Indirect Address register + * to transfer the data. + * + * We define the H2IR_* to the read address and H2IW_* to the write address and + * H2I_* to be fields in whatever register is referred to. + * + * When we write to indirect registers which are larger than one word (16 bit) + * we have to fill more than one indirect register before writing. When we read + * back however we have to read several times, each time with different Read + * Back Indexes (there are defs for doing this easily). + */ + +/* + * Relay Control + */ +#define H2I_RELAY_C 0x9100 +#define H2I_RELAY_C_STATE 0x01 /* state of RELAY pin signal */ + +/* DMA port enable */ + +#define H2I_DMA_PORT_EN 0x9104 +#define H2I_DMA_PORT_EN_SY_IN 0x01 /* Synth_in DMA port */ +#define H2I_DMA_PORT_EN_AESRX 0x02 /* AES receiver DMA port */ +#define H2I_DMA_PORT_EN_AESTX 0x04 /* AES transmitter DMA port */ +#define H2I_DMA_PORT_EN_CODECTX 0x08 /* CODEC transmit DMA port */ +#define H2I_DMA_PORT_EN_CODECR 0x10 /* CODEC receive DMA port */ + +#define H2I_DMA_END 0x9108 /* global dma endian select */ +#define H2I_DMA_END_SY_IN 0x01 /* Synth_in DMA port */ +#define H2I_DMA_END_AESRX 0x02 /* AES receiver DMA port */ +#define H2I_DMA_END_AESTX 0x04 /* AES transmitter DMA port */ +#define H2I_DMA_END_CODECTX 0x08 /* CODEC transmit DMA port */ +#define H2I_DMA_END_CODECR 0x10 /* CODEC receive DMA port */ + /* 0=b_end 1=l_end */ + +#define H2I_DMA_DRV 0x910C /* global PBUS DMA enable */ + +#define H2I_SYNTH_C 0x1104 /* Synth DMA control */ + +#define H2I_AESRX_C 0x1204 /* AES RX dma control */ + +#define H2I_C_TS_EN 0x20 /* Timestamp enable */ +#define H2I_C_TS_FRMT 0x40 /* Timestamp format */ +#define H2I_C_NAUDIO 0x80 /* Sign extend */ + +/* AESRX CTL, 16 bit */ + +#define H2I_AESTX_C 0x1304 /* AES TX DMA control */ +#define H2I_AESTX_C_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */ +#define H2I_AESTX_C_CLKID_M 0x18 +#define H2I_AESTX_C_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */ +#define H2I_AESTX_C_DATAT_M 0x300 + +/* CODEC registers */ + +#define H2I_DAC_C1 0x1404 /* DAC DMA control, 16 bit */ +#define H2I_DAC_C2 0x1408 /* DAC DMA control, 32 bit */ +#define H2I_ADC_C1 0x1504 /* ADC DMA control, 16 bit */ +#define H2I_ADC_C2 0x1508 /* ADC DMA control, 32 bit */ + +/* Bits in CTL1 register */ + +#define H2I_C1_DMA_SHIFT 0 /* DMA channel */ +#define H2I_C1_DMA_M 0x7 +#define H2I_C1_CLKID_SHIFT 3 /* Bresenham Clock Gen 1-3 */ +#define H2I_C1_CLKID_M 0x18 +#define H2I_C1_DATAT_SHIFT 8 /* 1=mono 2=stereo (3=quad) */ +#define H2I_C1_DATAT_M 0x300 + +/* Bits in CTL2 register */ + +#define H2I_C2_R_GAIN_SHIFT 0 /* right a/d input gain */ +#define H2I_C2_R_GAIN_M 0xf +#define H2I_C2_L_GAIN_SHIFT 4 /* left a/d input gain */ +#define H2I_C2_L_GAIN_M 0xf0 +#define H2I_C2_R_SEL 0x100 /* right input select */ +#define H2I_C2_L_SEL 0x200 /* left input select */ +#define H2I_C2_MUTE 0x400 /* mute */ +#define H2I_C2_DO1 0x00010000 /* digital output port bit 0 */ +#define H2I_C2_DO2 0x00020000 /* digital output port bit 1 */ +#define H2I_C2_R_ATT_SHIFT 18 /* right d/a output - */ +#define H2I_C2_R_ATT_M 0x007c0000 /* attenuation */ +#define H2I_C2_L_ATT_SHIFT 23 /* left d/a output - */ +#define H2I_C2_L_ATT_M 0x0f800000 /* attenuation */ + +#define H2I_SYNTH_MAP_C 0x1104 /* synth dma handshake ctrl */ + +/* Clock generator CTL 1, 16 bit */ + +#define H2I_BRES1_C1 0x2104 +#define H2I_BRES2_C1 0x2204 +#define H2I_BRES3_C1 0x2304 + +#define H2I_BRES_C1_SHIFT 0 /* 0=48.0 1=44.1 2=aes_rx */ +#define H2I_BRES_C1_M 0x03 + +/* Clock generator CTL 2, 32 bit */ + +#define H2I_BRES1_C2 0x2108 +#define H2I_BRES2_C2 0x2208 +#define H2I_BRES3_C2 0x2308 + +#define H2I_BRES_C2_INC_SHIFT 0 /* increment value */ +#define H2I_BRES_C2_INC_M 0xffff +#define H2I_BRES_C2_MOD_SHIFT 16 /* modcontrol value */ +#define H2I_BRES_C2_MOD_M 0xffff0000 /* modctrl=0xffff&(modinc-1) */ + +/* Unix timer, 64 bit */ + +#define H2I_UTIME 0x3104 +#define H2I_UTIME_0_LD 0xffff /* microseconds, LSB's */ +#define H2I_UTIME_1_LD0 0x0f /* microseconds, MSB's */ +#define H2I_UTIME_1_LD1 0xf0 /* tenths of microseconds */ +#define H2I_UTIME_2_LD 0xffff /* seconds, LSB's */ +#define H2I_UTIME_3_LD 0xffff /* seconds, MSB's */ + +struct hal2_ctl_regs { + u32 _unused0[4]; + u32 isr; /* 0x10 Status Register */ + u32 _unused1[3]; + u32 rev; /* 0x20 Revision Register */ + u32 _unused2[3]; + u32 iar; /* 0x30 Indirect Address Register */ + u32 _unused3[3]; + u32 idr0; /* 0x40 Indirect Data Register 0 */ + u32 _unused4[3]; + u32 idr1; /* 0x50 Indirect Data Register 1 */ + u32 _unused5[3]; + u32 idr2; /* 0x60 Indirect Data Register 2 */ + u32 _unused6[3]; + u32 idr3; /* 0x70 Indirect Data Register 3 */ +}; + +struct hal2_aes_regs { + u32 rx_stat[2]; /* Status registers */ + u32 rx_cr[2]; /* Control registers */ + u32 rx_ud[4]; /* User data window */ + u32 rx_st[24]; /* Channel status data */ + + u32 tx_stat[1]; /* Status register */ + u32 tx_cr[3]; /* Control registers */ + u32 tx_ud[4]; /* User data window */ + u32 tx_st[24]; /* Channel status data */ +}; + +struct hal2_vol_regs { + u32 right; /* Right volume */ + u32 left; /* Left volume */ +}; + +struct hal2_syn_regs { + u32 _unused0[2]; + u32 page; /* DOC Page register */ + u32 regsel; /* DOC Register selection */ + u32 dlow; /* DOC Data low */ + u32 dhigh; /* DOC Data high */ + u32 irq; /* IRQ Status */ + u32 dram; /* DRAM Access */ +}; + +#endif /* __HAL2_H */ |