diff options
Diffstat (limited to 'sound/oss')
| -rw-r--r-- | sound/oss/Kconfig | 12 | ||||
| -rw-r--r-- | sound/oss/Makefile | 1 | ||||
| -rw-r--r-- | sound/oss/audio.c | 2 | ||||
| -rw-r--r-- | sound/oss/midi_synth.c | 2 | ||||
| -rw-r--r-- | sound/oss/mpu401.c | 2 | ||||
| -rw-r--r-- | sound/oss/sh_dac_audio.c | 3 | ||||
| -rw-r--r-- | sound/oss/sscape.c | 1480 |
7 files changed, 3 insertions, 1499 deletions
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig index bcf2a0698d5..135a2b77cc4 100644 --- a/sound/oss/Kconfig +++ b/sound/oss/Kconfig @@ -287,18 +287,6 @@ config SOUND_DMAP Say Y unless you have 16MB or more RAM or a PCI sound card. -config SOUND_SSCAPE - tristate "Ensoniq SoundScape support" - help - Answer Y if you have a sound card based on the Ensoniq SoundScape - chipset. Such cards are being manufactured at least by Ensoniq, Spea - and Reveal (Reveal makes also other cards). - - If you compile the driver into the kernel, you have to add - "sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command - line. - - config SOUND_VMIDI tristate "Loopback MIDI device support" help diff --git a/sound/oss/Makefile b/sound/oss/Makefile index e0ae4d4d6a5..567b8a74178 100644 --- a/sound/oss/Makefile +++ b/sound/oss/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o obj-$(CONFIG_SOUND_PSS) += pss.o ad1848.o mpu401.o obj-$(CONFIG_SOUND_TRIX) += trix.o ad1848.o sb_lib.o uart401.o -obj-$(CONFIG_SOUND_SSCAPE) += sscape.o ad1848.o mpu401.o obj-$(CONFIG_SOUND_MSS) += ad1848.o obj-$(CONFIG_SOUND_PAS) += pas2.o sb.o sb_lib.o uart401.o obj-$(CONFIG_SOUND_SB) += sb.o sb_lib.o uart401.o diff --git a/sound/oss/audio.c b/sound/oss/audio.c index b69c05b7ea7..7df48a25c4e 100644 --- a/sound/oss/audio.c +++ b/sound/oss/audio.c @@ -838,7 +838,7 @@ static int dma_ioctl(int dev, unsigned int cmd, void __user *arg) if ((err = audio_devs[dev]->d->prepare_for_input(dev, dmap_in->fragment_size, dmap_in->nbufs)) < 0) { spin_unlock_irqrestore(&dmap_in->lock,flags); - return -err; + return err; } dmap_in->dma_mode = DMODE_INPUT; audio_devs[dev]->enable_bits |= PCM_ENABLE_INPUT; diff --git a/sound/oss/midi_synth.c b/sound/oss/midi_synth.c index 9e450988ed3..3bc7104c537 100644 --- a/sound/oss/midi_synth.c +++ b/sound/oss/midi_synth.c @@ -426,7 +426,7 @@ midi_synth_open(int dev, int mode) int err; struct midi_input_info *inc; - if (orig_dev < 0 || orig_dev > num_midis || midi_devs[orig_dev] == NULL) + if (orig_dev < 0 || orig_dev >= num_midis || midi_devs[orig_dev] == NULL) return -ENXIO; midi2synth[orig_dev] = dev; diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c index 734b8f9e2f7..0af9d24feb8 100644 --- a/sound/oss/mpu401.c +++ b/sound/oss/mpu401.c @@ -770,7 +770,7 @@ static int mpu_synth_ioctl(int dev, unsigned int cmd, void __user *arg) midi_dev = synth_devs[dev]->midi_dev; - if (midi_dev < 0 || midi_dev > num_midis || midi_devs[midi_dev] == NULL) + if (midi_dev < 0 || midi_dev >= num_midis || midi_devs[midi_dev] == NULL) return -ENXIO; devc = &dev_conf[midi_dev]; diff --git a/sound/oss/sh_dac_audio.c b/sound/oss/sh_dac_audio.c index b2ed8757542..4153752507e 100644 --- a/sound/oss/sh_dac_audio.c +++ b/sound/oss/sh_dac_audio.c @@ -164,9 +164,6 @@ static ssize_t dac_audio_write(struct file *file, const char *buf, size_t count, int free; int nbytes; - if (count < 0) - return -EINVAL; - if (!count) { dac_audio_sync(); return 0; diff --git a/sound/oss/sscape.c b/sound/oss/sscape.c deleted file mode 100644 index 30c36d1f35d..00000000000 --- a/sound/oss/sscape.c +++ /dev/null @@ -1,1480 +0,0 @@ -/* - * sound/oss/sscape.c - * - * Low level driver for Ensoniq SoundScape - * - * - * Copyright (C) by Hannu Savolainen 1993-1997 - * - * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL) - * Version 2 (June 1991). See the "COPYING" file distributed with this software - * for more info. - * - * - * Thomas Sailer : ioctl code reworked (vmalloc/vfree removed) - * Sergey Smitienko : ensoniq p'n'p support - * Christoph Hellwig : adapted to module_init/module_exit - * Bartlomiej Zolnierkiewicz : added __init to attach_sscape() - * Chris Rankin : Specify that this module owns the coprocessor - * Arnaldo C. de Melo : added missing restore_flags in sscape_pnp_upload_file - */ - -#include <linux/init.h> -#include <linux/module.h> - -#include "sound_config.h" -#include "sound_firmware.h" - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/fcntl.h> -#include <linux/ctype.h> -#include <linux/stddef.h> -#include <linux/kmod.h> -#include <asm/dma.h> -#include <asm/io.h> -#include <linux/wait.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/proc_fs.h> -#include <linux/mm.h> -#include <linux/spinlock.h> - -#include "coproc.h" - -#include "ad1848.h" -#include "mpu401.h" - -/* - * I/O ports - */ -#define MIDI_DATA 0 -#define MIDI_CTRL 1 -#define HOST_CTRL 2 -#define TX_READY 0x02 -#define RX_READY 0x01 -#define HOST_DATA 3 -#define ODIE_ADDR 4 -#define ODIE_DATA 5 - -/* - * Indirect registers - */ - -#define GA_INTSTAT_REG 0 -#define GA_INTENA_REG 1 -#define GA_DMAA_REG 2 -#define GA_DMAB_REG 3 -#define GA_INTCFG_REG 4 -#define GA_DMACFG_REG 5 -#define GA_CDCFG_REG 6 -#define GA_SMCFGA_REG 7 -#define GA_SMCFGB_REG 8 -#define GA_HMCTL_REG 9 - -/* - * DMA channel identifiers (A and B) - */ - -#define SSCAPE_DMA_A 0 -#define SSCAPE_DMA_B 1 - -#define PORT(name) (devc->base+name) - -/* - * Host commands recognized by the OBP microcode - */ - -#define CMD_GEN_HOST_ACK 0x80 -#define CMD_GEN_MPU_ACK 0x81 -#define CMD_GET_BOARD_TYPE 0x82 -#define CMD_SET_CONTROL 0x88 /* Old firmware only */ -#define CMD_GET_CONTROL 0x89 /* Old firmware only */ -#define CTL_MASTER_VOL 0 -#define CTL_MIC_MODE 2 -#define CTL_SYNTH_VOL 4 -#define CTL_WAVE_VOL 7 -#define CMD_SET_EXTMIDI 0x8a -#define CMD_GET_EXTMIDI 0x8b -#define CMD_SET_MT32 0x8c -#define CMD_GET_MT32 0x8d - -#define CMD_ACK 0x80 - -#define IC_ODIE 1 -#define IC_OPUS 2 - -typedef struct sscape_info -{ - int base, irq, dma; - - int codec, codec_irq; /* required to setup pnp cards*/ - int codec_type; - int ic_type; - char* raw_buf; - unsigned long raw_buf_phys; - int buffsize; /* -------------------------- */ - spinlock_t lock; - int ok; /* Properly detected */ - int failed; - int dma_allocated; - int codec_audiodev; - int opened; - int *osp; - int my_audiodev; -} sscape_info; - -static struct sscape_info adev_info = { - 0 -}; - -static struct sscape_info *devc = &adev_info; -static int sscape_mididev = -1; - -/* Some older cards have assigned interrupt bits differently than new ones */ -static char valid_interrupts_old[] = { - 9, 7, 5, 15 -}; - -static char valid_interrupts_new[] = { - 9, 5, 7, 10 -}; - -static char *valid_interrupts = valid_interrupts_new; - -/* - * See the bottom of the driver. This can be set by spea =0/1. - */ - -#ifdef REVEAL_SPEA -static char old_hardware = 1; -#else -static char old_hardware; -#endif - -static void sleep(unsigned howlong) -{ - current->state = TASK_INTERRUPTIBLE; - schedule_timeout(howlong); -} - -static unsigned char sscape_read(struct sscape_info *devc, int reg) -{ - unsigned long flags; - unsigned char val; - - spin_lock_irqsave(&devc->lock,flags); - outb(reg, PORT(ODIE_ADDR)); - val = inb(PORT(ODIE_DATA)); - spin_unlock_irqrestore(&devc->lock,flags); - return val; -} - -static void __sscape_write(int reg, int data) -{ - outb(reg, PORT(ODIE_ADDR)); - outb(data, PORT(ODIE_DATA)); -} - -static void sscape_write(struct sscape_info *devc, int reg, int data) -{ - unsigned long flags; - - spin_lock_irqsave(&devc->lock,flags); - __sscape_write(reg, data); - spin_unlock_irqrestore(&devc->lock,flags); -} - -static unsigned char sscape_pnp_read_codec(sscape_info* devc, unsigned char reg) -{ - unsigned char res; - unsigned long flags; - - spin_lock_irqsave(&devc->lock,flags); - outb( reg, devc -> codec); - res = inb (devc -> codec + 1); - spin_unlock_irqrestore(&devc->lock,flags); - return res; - -} - -static void sscape_pnp_write_codec(sscape_info* devc, unsigned char reg, unsigned char data) -{ - unsigned long flags; - - spin_lock_irqsave(&devc->lock,flags); - outb( reg, devc -> codec); - outb( data, devc -> codec + 1); - spin_unlock_irqrestore(&devc->lock,flags); -} - -static void host_open(struct sscape_info *devc) -{ - outb((0x00), PORT(HOST_CTRL)); /* Put the board to the host mode */ -} - -static void host_close(struct sscape_info *devc) -{ - outb((0x03), PORT(HOST_CTRL)); /* Put the board to the MIDI mode */ -} - -static int host_write(struct sscape_info *devc, unsigned char *data, int count) -{ - unsigned long flags; - int i, timeout_val; - - spin_lock_irqsave(&devc->lock,flags); - /* - * Send the command and data bytes - */ - - for (i = 0; i < count; i++) - { - for (timeout_val = 10000; timeout_val > 0; timeout_val--) - if (inb(PORT(HOST_CTRL)) & TX_READY) - break; - - if (timeout_val <= 0) - { - spin_unlock_irqrestore(&devc->lock,flags); - return 0; - } - outb(data[i], PORT(HOST_DATA)); - } - spin_unlock_irqrestore(&devc->lock,flags); - return 1; -} - -static int host_read(struct sscape_info *devc) -{ - unsigned long flags; - int timeout_val; - unsigned char data; - - spin_lock_irqsave(&devc->lock,flags); - /* - * Read a byte - */ - - for (timeout_val = 10000; timeout_val > 0; timeout_val--) - if (inb(PORT(HOST_CTRL)) & RX_READY) - break; - - if (timeout_val <= 0) - { - spin_unlock_irqrestore(&devc->lock,flags); - return -1; - } - data = inb(PORT(HOST_DATA)); - spin_unlock_irqrestore(&devc->lock,flags); - return data; -} - -#if 0 /* unused */ -static int host_command1(struct sscape_info *devc, int cmd) -{ - unsigned char buf[10]; - buf[0] = (unsigned char) (cmd & 0xff); - return host_write(devc, buf, 1); -} -#endif /* unused */ - - -static int host_command2(struct sscape_info *devc, int cmd, int parm1) -{ - unsigned char buf[10]; - - buf[0] = (unsigned char) (cmd & 0xff); - buf[1] = (unsigned char) (parm1 & 0xff); - - return host_write(devc, buf, 2); -} - -static int host_command3(struct sscape_info *devc, int cmd, int parm1, int parm2) -{ - unsigned char buf[10]; - - buf[0] = (unsigned char) (cmd & 0xff); - buf[1] = (unsigned char) (parm1 & 0xff); - buf[2] = (unsigned char) (parm2 & 0xff); - return host_write(devc, buf, 3); -} - -static void set_mt32(struct sscape_info *devc, int value) -{ - host_open(devc); - host_command2(devc, CMD_SET_MT32, value ? 1 : 0); - if (host_read(devc) != CMD_ACK) - { - /* printk( "SNDSCAPE: Setting MT32 mode failed\n"); */ - } - host_close(devc); -} - -static void set_control(struct sscape_info *devc, int ctrl, int value) -{ - host_open(devc); - host_command3(devc, CMD_SET_CONTROL, ctrl, value); - if (host_read(devc) != CMD_ACK) - { - /* printk( "SNDSCAPE: Setting control (%d) failed\n", ctrl); */ - } - host_close(devc); -} - -static void do_dma(struct sscape_info *devc, int dma_chan, unsigned long buf, int blk_size, int mode) -{ - unsigned char temp; - - if (dma_chan != SSCAPE_DMA_A) - { - printk(KERN_WARNING "soundscape: Tried to use DMA channel != A. Why?\n"); - return; - } - audio_devs[devc->codec_audiodev]->flags &= ~DMA_AUTOMODE; - DMAbuf_start_dma(devc->codec_audiodev, buf, blk_size, mode); - audio_devs[devc->codec_audiodev]->flags |= DMA_AUTOMODE; - - temp = devc->dma << 4; /* Setup DMA channel select bits */ - if (devc->dma <= 3) - temp |= 0x80; /* 8 bit DMA channel */ - - temp |= 1; /* Trigger DMA */ - sscape_write(devc, GA_DMAA_REG, temp); - temp &= 0xfe; /* Clear DMA trigger */ - sscape_write(devc, GA_DMAA_REG, temp); -} - -static int verify_mpu(struct sscape_info *devc) -{ - /* - * The SoundScape board could be in three modes (MPU, 8250 and host). - * If the card is not in the MPU mode, enabling the MPU driver will - * cause infinite loop (the driver believes that there is always some - * received data in the buffer. - * - * Detect this by looking if there are more than 10 received MIDI bytes - * (0x00) in the buffer. - */ - - int i; - - for (i = 0; i < 10; i++) - { - if (inb(devc->base + HOST_CTRL) & 0x80) - return 1; - - if (inb(devc->base) != 0x00) - return 1; - } - printk(KERN_WARNING "SoundScape: The device is not in the MPU-401 mode\n"); - return 0; -} - -static int sscape_coproc_open(void *dev_info, int sub_device) -{ - if (sub_device == COPR_MIDI) - { - set_mt32(devc, 0); - if (!verify_mpu(devc)) - return -EIO; - } - return 0; -} - -static void sscape_coproc_close(void *dev_info, int sub_device) -{ - struct sscape_info *devc = dev_info; - unsigned long flags; - - spin_lock_irqsave(&devc->lock,flags); - if (devc->dma_allocated) - { - __sscape_write(GA_DMAA_REG, 0x20); /* DMA channel disabled */ - devc->dma_allocated = 0; - } - spin_unlock_irqrestore(&devc->lock,flags); - return; -} - -static void sscape_coproc_reset(void *dev_info) -{ -} - -static int sscape_download_boot(struct sscape_info *devc, unsigned char *block, int size, int flag) -{ - unsigned long flags; - unsigned char temp; - volatile int done, timeout_val; - static unsigned char codec_dma_bits; - - if (flag & CPF_FIRST) - { - /* - * First block. Have to allocate DMA and to reset the board - * before continuing. - */ - - spin_lock_irqsave(&devc->lock,flags); - codec_dma_bits = sscape_read(devc, GA_CDCFG_REG); - - if (devc->dma_allocated == 0) - devc->dma_allocated = 1; - - spin_unlock_irqrestore(&devc->lock,flags); - - sscape_write(devc, GA_HMCTL_REG, - (temp = sscape_read(devc, GA_HMCTL_REG)) & 0x3f); /*Reset */ - - for (timeout_val = 10000; timeout_val > 0; timeout_val--) - sscape_read(devc, GA_HMCTL_REG); /* Delay */ - - /* Take board out of reset */ - sscape_write(devc, GA_HMCTL_REG, - (temp = sscape_read(devc, GA_HMCTL_REG)) | 0x80); - } - /* - * Transfer one code block using DMA - */ - if (audio_devs[devc->codec_audiodev]->dmap_out->raw_buf == NULL) - { - printk(KERN_WARNING "soundscape: DMA buffer not available\n"); - return 0; - } - memcpy(audio_devs[devc->codec_audiodev]->dmap_out->raw_buf, block, size); - - spin_lock_irqsave(&devc->lock,flags); - - /******** INTERRUPTS DISABLED NOW ********/ - - do_dma(devc, SSCAPE_DMA_A, - audio_devs[devc->codec_audiodev]->dmap_out->raw_buf_phys, - size, DMA_MODE_WRITE); - - /* - * Wait until transfer completes. - */ - - done = 0; - timeout_val = 30; - while (!done && timeout_val-- > 0) - { - int resid; - - if (HZ / 50) - sleep(HZ / 50); - clear_dma_ff(devc->dma); - if ((resid = get_dma_residue(devc->dma)) == 0) - done = 1; - } - - spin_unlock_irqrestore(&devc->lock,flags); - if (!done) - return 0; - - if (flag & CPF_LAST) - { - /* - * Take the board out of reset - */ - outb((0x00), PORT(HOST_CTRL)); - outb((0x00), PORT(MIDI_CTRL)); - - temp = sscape_read(devc, GA_HMCTL_REG); - temp |= 0x40; - sscape_write(devc, GA_HMCTL_REG, temp); /* Kickstart the board */ - - /* - * Wait until the ODB wakes up - */ - spin_lock_irqsave(&devc->lock,flags); - done = 0; - timeout_val = 5 * HZ; - while (!done && timeout_val-- > 0) - { - unsigned char x; - - sleep(1); - x = inb(PORT(HOST_DATA)); - if (x == 0xff || x == 0xfe) /* OBP startup acknowledge */ - { - DDB(printk("Soundscape: Acknowledge = %x\n", x)); - done = 1; - } - } - sscape_write(devc, GA_CDCFG_REG, codec_dma_bits); - - spin_unlock_irqrestore(&devc->lock,flags); - if (!done) - { - printk(KERN_ERR "soundscape: The OBP didn't respond after code download\n"); - return 0; - } - spin_lock_irqsave(&devc->lock,flags); - done = 0; - timeout_val = 5 * HZ; - while (!done && timeout_val-- > 0) - { - sleep(1); - if (inb(PORT(HOST_DATA)) == 0xfe) /* Host startup acknowledge */ - done = 1; - } - spin_unlock_irqrestore(&devc->lock,flags); - if (!done) - { - printk(KERN_ERR "soundscape: OBP Initialization failed.\n"); - return 0; - } - printk(KERN_INFO "SoundScape board initialized OK\n"); - set_control(devc, CTL_MASTER_VOL, 100); - set_control(devc, CTL_SYNTH_VOL, 100); - -#ifdef SSCAPE_DEBUG3 - /* - * Temporary debugging aid. Print contents of the registers after - * downloading the code. - */ - { - int i; - - for (i = 0; i < 13; i++) - printk("I%d = %02x (new value)\n", i, sscape_read(devc, i)); - } -#endif - - } - return 1; -} - -static int download_boot_block(void *dev_info, copr_buffer * buf) -{ - if (buf->len <= 0 || buf->len > sizeof(buf->data)) - return -EINVAL; - - if (!sscape_download_boot(devc, buf->data, buf->len, buf->flags)) - { - printk(KERN_ERR "soundscape: Unable to load microcode block to the OBP.\n"); - return -EIO; - } - return 0; -} - -static int sscape_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, int local) -{ - copr_buffer *buf; - int err; - - switch (cmd) - { - case SNDCTL_COPR_RESET: - sscape_coproc_reset(dev_info); - return 0; - - case SNDCTL_COPR_LOAD: - buf = (copr_buffer *) vmalloc(sizeof(copr_buffer)); - if (buf == NULL) - return -ENOSPC; - if (copy_from_user(buf, arg, sizeof(copr_buffer))) - { - vfree(buf); - return -EFAULT; - } - err = download_boot_block(dev_info, buf); - vfree(buf); - return err; - - default: - return -EINVAL; - } -} - -static coproc_operations sscape_coproc_operations = -{ - "SoundScape M68K", - THIS_MODULE, - sscape_coproc_open, - sscape_coproc_close, - sscape_coproc_ioctl, - sscape_coproc_reset, - &adev_info -}; - -static struct resource *sscape_ports; -static int sscape_is_pnp; - -static void __init attach_sscape(struct address_info *hw_config) -{ -#ifndef SSCAPE_REGS - /* - * Config register values for Spea/V7 Media FX and Ensoniq S-2000. - * These values are card - * dependent. If you have another SoundScape based card, you have to - * find the correct values. Do the following: - * - Compile this driver with SSCAPE_DEBUG1 defined. - * - Shut down and power off your machine. - * - Boot with DOS so that the SSINIT.EXE program is run. - * - Warm boot to {Linux|SYSV|BSD} and write down the lines displayed - * when detecting the SoundScape. - * - Modify the following list to use the values printed during boot. - * Undefine the SSCAPE_DEBUG1 - */ -#define SSCAPE_REGS { \ -/* I0 */ 0x00, \ -/* I1 */ 0xf0, /* Note! Ignored. Set always to 0xf0 */ \ -/* I2 */ 0x20, /* Note! Ignored. Set always to 0x20 */ \ -/* I3 */ 0x20, /* Note! Ignored. Set always to 0x20 */ \ -/* I4 */ 0xf5, /* Ignored */ \ -/* I5 */ 0x10, \ -/* I6 */ 0x00, \ -/* I7 */ 0x2e, /* I7 MEM config A. Likely to vary between models */ \ -/* I8 */ 0x00, /* I8 MEM config B. Likely to vary between models */ \ -/* I9 */ 0x40 /* Ignored */ \ - } -#endif - - unsigned long flags; - static unsigned char regs[10] = SSCAPE_REGS; - - int i, irq_bits = 0xff; - - if (old_hardware) - { - valid_interrupts = valid_interrupts_old; - conf_printf("Ensoniq SoundScape (old)", hw_config); - } - else - conf_printf("Ensoniq SoundScape", hw_config); - - for (i = 0; i < 4; i++) - { - if (hw_config->irq == valid_interrupts[i]) - { - irq_bits = i; - break; - } - } - if (hw_config->irq > 15 || (regs[4] = irq_bits == 0xff)) - { - printk(KERN_ERR "Invalid IRQ%d\n", hw_config->irq); - release_region(devc->base, 2); - release_region(devc->base + 2, 6); - if (sscape_is_pnp) - release_region(devc->codec, 2); - return; - } - - if (!sscape_is_pnp) { - - spin_lock_irqsave(&devc->lock,flags); - /* Host interrupt enable */ - sscape_write(devc, 1, 0xf0); /* All interrupts enabled */ - /* DMA A status/trigger register */ - sscape_write(devc, 2, 0x20); /* DMA channel disabled */ - /* DMA B status/trigger register */ - sscape_write(devc, 3, 0x20); /* DMA channel disabled */ - /* Host interrupt config reg */ - sscape_write(devc, 4, 0xf0 | (irq_bits << 2) | irq_bits); - /* Don't destroy CD-ROM DMA config bits (0xc0) */ - sscape_write(devc, 5, (regs[5] & 0x3f) | (sscape_read(devc, 5) & 0xc0)); - /* CD-ROM config (WSS codec actually) */ - sscape_write(devc, 6, regs[6]); - sscape_write(devc, 7, regs[7]); - sscape_write(devc, 8, regs[8]); - /* Master control reg. Don't modify CR-ROM bits. Disable SB emul */ - sscape_write(devc, 9, (sscape_read(devc, 9) & 0xf0) | 0x08); - spin_unlock_irqrestore(&devc->lock,flags); - } -#ifdef SSCAPE_DEBUG2 - /* - * Temporary debugging aid. Print contents of the registers after - * changing them. - */ - { - int i; - - for (i = 0; i < 13; i++) - printk("I%d = %02x (new value)\n", i, sscape_read(devc, i)); - } -#endif - - if (probe_mpu401(hw_config, sscape_ports)) - hw_config->always_detect = 1; - hw_config->name = "SoundScape"; - - hw_config->irq *= -1; /* Negative value signals IRQ sharing */ - attach_mpu401(hw_config, THIS_MODULE); - hw_config->irq *= -1; /* Restore it */ - - if (hw_config->slots[1] != -1) /* The MPU driver installed itself */ - { - sscape_mididev = hw_config->slots[1]; - midi_devs[hw_config->slots[1]]->coproc = &sscape_coproc_operations; - } - sscape_write(devc, GA_INTENA_REG, 0x80); /* Master IRQ enable */ - devc->ok = 1; - devc->failed = 0; -} - -static int detect_ga(sscape_info * devc) -{ - unsigned char save; - - DDB(printk("Entered Soundscape detect_ga(%x)\n", devc->base)); - - /* - * First check that the address register of "ODIE" is - * there and that it has exactly 4 writable bits. - * First 4 bits - */ - - if ((save = inb(PORT(ODIE_ADDR))) & 0xf0) - { - DDB(printk("soundscape: Detect error A\n")); - return 0; - } - outb((0x00), PORT(ODIE_ADDR)); - if (inb(PORT(ODIE_ADDR)) != 0x00) - { - DDB(printk("soundscape: Detect error B\n")); - return 0; - } - outb((0xff), PORT(ODIE_ADDR)); - if (inb(PORT(ODIE_ADDR)) != 0x0f) - { - DDB(printk("soundscape: Detect error C\n")); - return 0; - } - outb((save), PORT(ODIE_ADDR)); - - /* - * Now verify that some indirect registers return zero on some bits. - * This may break the driver with some future revisions of "ODIE" but... - */ - - if (sscape_read(devc, 0) & 0x0c) - { - DDB(printk("soundscape: Detect error D (%x)\n", sscape_read(devc, 0))); - return 0; - } - if (sscape_read(devc, 1) & 0x0f) - { - DDB(printk("soundscape: Detect error E\n")); - return 0; - } - if (sscape_read(devc, 5) & 0x0f) - { - DDB(printk("soundscape: Detect error F\n")); - return 0; - } - return 1; -} - -static int sscape_read_host_ctrl(sscape_info* devc) -{ - return host_read(devc); -} - -static void sscape_write_host_ctrl2(sscape_info *devc, int a, int b) -{ - host_command2(devc, a, b); -} - -static int sscape_alloc_dma(sscape_info *devc) -{ - char *start_addr, *end_addr; - int dma_pagesize; - int sz, size; - struct page *page; - - if (devc->raw_buf != NULL) return 0; /* Already done */ - dma_pagesize = (devc->dma < 4) ? (64 * 1024) : (128 * 1024); - devc->raw_buf = NULL; - devc->buffsize = 8192*4; - if (devc->buffsize > dma_pagesize) devc->buffsize = dma_pagesize; - start_addr = NULL; - /* - * Now loop until we get a free buffer. Try to get smaller buffer if - * it fails. Don't accept smaller than 8k buffer for performance - * reasons. - */ - while (start_addr == NULL && devc->buffsize > PAGE_SIZE) { - for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1); - devc->buffsize = PAGE_SIZE * (1 << sz); - start_addr = (char *) __get_free_pages(GFP_ATOMIC|GFP_DMA, sz); - if (start_addr == NULL) devc->buffsize /= 2; - } - - if (start_addr == NULL) { - printk(KERN_ERR "sscape pnp init error: Couldn't allocate DMA buffer\n"); - return 0; - } else { - /* make some checks */ - end_addr = start_addr + devc->buffsize - 1; - /* now check if it fits into the same dma-pagesize */ - - if (((long) start_addr & ~(dma_pagesize - 1)) != ((long) end_addr & ~(dma_pagesize - 1)) - || end_addr >= (char *) (MAX_DMA_ADDRESS)) { - printk(KERN_ERR "sscape pnp: Got invalid address 0x%lx for %db DMA-buffer\n", (long) start_addr, devc->buffsize); - return 0; - } - } - devc->raw_buf = start_addr; - devc->raw_buf_phys = virt_to_bus(start_addr); - - for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++) - SetPageReserved(page); - return 1; -} - -static void sscape_free_dma(sscape_info *devc) -{ - int sz, size; - unsigned long start_addr, end_addr; - struct page *page; - - if (devc->raw_buf == NULL) return; - for (sz = 0, size = PAGE_SIZE; size < devc->buffsize; sz++, size <<= 1); - start_addr = (unsigned long) devc->raw_buf; - end_addr = start_addr + devc->buffsize; - - for (page = virt_to_page(start_addr); page <= virt_to_page(end_addr); page++) - ClearPageReserved(page); - - free_pages((unsigned long) devc->raw_buf, sz); - devc->raw_buf = NULL; -} - -/* Intel version !!!!!!!!! */ - -static int sscape_start_dma(int chan, unsigned long physaddr, int count, int dma_mode) -{ - unsigned long flags; - - flags = claim_dma_lock(); - disable_dma(chan); - clear_dma_ff(chan); - set_dma_mode(chan, dma_mode); - set_dma_addr(chan, physaddr); - set_dma_count(chan, count); - enable_dma(chan); - release_dma_lock(flags); - return 0; -} - -static void sscape_pnp_start_dma(sscape_info* devc, int arg ) -{ - int reg; - if (arg == 0) reg = 2; - else reg = 3; - - sscape_write(devc, reg, sscape_read( devc, reg) | 0x01); - sscape_write(devc, reg, sscape_read( devc, reg) & 0xFE); -} - -static int sscape_pnp_wait_dma (sscape_info* devc, int arg ) -{ - int reg; - unsigned long i; - unsigned char d; - - if (arg == 0) reg = 2; - else reg = 3; - - sleep ( 1 ); - i = 0; - do { - d = sscape_read(devc, reg) & 1; - if ( d == 1) break; - i++; - } while (i < 500000); - d = sscape_read(devc, reg) & 1; - return d; -} - -static int sscape_pnp_alloc_dma(sscape_info* devc) -{ - /* printk(KERN_INFO "sscape: requesting dma\n"); */ - if (request_dma(devc -> dma, "sscape")) return 0; - /* printk(KERN_INFO "sscape: dma channel allocated\n"); */ - if (!sscape_alloc_dma(devc)) { - free_dma(devc -> dma); - return 0; - }; - return 1; -} - -static void sscape_pnp_free_dma(sscape_info* devc) -{ - sscape_free_dma( devc); - free_dma(devc -> dma ); - /* printk(KERN_INFO "sscape: dma released\n"); */ -} - -static int sscape_pnp_upload_file(sscape_info* devc, char* fn) -{ - int done = 0; - int timeout_val; - char* data,*dt; - int len,l; - unsigned long flags; - - sscape_write( devc, 9, sscape_read(devc, 9 ) & 0x3F ); - sscape_write( devc, 2, (devc -> dma << 4) | 0x80 ); - sscape_write( devc, 3, 0x20 ); - sscape_write( devc, 9, sscape_read( devc, 9 ) | 0x80 ); - - len = mod_firmware_load(fn, &data); - if (len == 0) { - printk(KERN_ERR "sscape: file not found: %s\n", fn); - return 0; - } - dt = data; - spin_lock_irqsave(&devc->lock,flags); - while ( len > 0 ) { - if (len > devc -> buffsize) l = devc->buffsize; - else l = len; - len -= l; - memcpy(devc->raw_buf, dt, l); dt += l; - sscape_start_dma(devc->dma, devc->raw_buf_phys, l, 0x48); - sscape_pnp_start_dma ( devc, 0 ); - if (sscape_pnp_wait_dma ( devc, 0 ) == 0) { - spin_unlock_irqrestore(&devc->lock,flags); - return 0; - } - } - - spin_unlock_irqrestore(&devc->lock,flags); - vfree(data); - - outb(0, devc -> base + 2); - outb(0, devc -> base); - - sscape_write ( devc, 9, sscape_read( devc, 9 ) | 0x40); - - timeout_val = 5 * HZ; - while (!done && timeout_val-- > 0) - { - unsigned char x; - sleep(1); - x = inb( devc -> base + 3); - if (x == 0xff || x == 0xfe) /* OBP startup acknowledge */ - { - //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x); - done = 1; - } - } - timeout_val = 5 * HZ; - done = 0; - while (!done && timeout_val-- > 0) - { - unsigned char x; - sleep(1); - x = inb( devc -> base + 3); - if (x == 0xfe) /* OBP startup acknowledge */ - { - //printk(KERN_ERR "Soundscape: Acknowledge = %x\n", x); - done = 1; - } - } - - if ( !done ) printk(KERN_ERR "soundscape: OBP Initialization failed.\n"); - - sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40); - sscape_write( devc, 3, (devc -> dma << 4) + 0x80); - return 1; -} - -static void __init sscape_pnp_init_hw(sscape_info* devc) -{ - unsigned char midi_irq = 0, sb_irq = 0; - unsigned i; - static char code_file_name[23] = "/sndscape/sndscape.cox"; - - int sscape_joystic_enable = 0x7f; - int sscape_mic_enable = 0; - int sscape_ext_midi = 0; - - if ( !sscape_pnp_alloc_dma(devc) ) { - printk(KERN_ERR "sscape: faild to allocate dma\n"); - return; - } - - for (i = 0; i < 4; i++) { - if ( devc -> irq == valid_interrupts[i] ) - midi_irq = i; - if ( devc -> codec_irq == valid_interrupts[i] ) - sb_irq = i; - } - - sscape_write( devc, 5, 0x50); - sscape_write( devc, 7, 0x2e); - sscape_write( devc, 8, 0x00); - - sscape_write( devc, 2, devc->ic_type == IC_ODIE ? 0x70 : 0x40); - sscape_write( devc, 3, ( devc -> dma << 4) | 0x80); - - sscape_write (devc, 4, 0xF0 | (midi_irq<<2) | midi_irq); - - i = 0x10; //sscape_read(devc, 9) & (devc->ic_type == IC_ODIE ? 0xf0 : 0xc0); - if (sscape_joystic_enable) i |= 8; - - sscape_write (devc, 9, i); - sscape_write (devc, 6, 0x80); - sscape_write (devc, 1, 0x80); - - if (devc -> codec_type == 2) { - sscape_pnp_write_codec( devc, 0x0C, 0x50); - sscape_pnp_write_codec( devc, 0x10, sscape_pnp_read_codec( devc, 0x10) & 0x3F); - sscape_pnp_write_codec( devc, 0x11, sscape_pnp_read_codec( devc, 0x11) | 0xC0); - sscape_pnp_write_codec( devc, 29, 0x20); - } - - if (sscape_pnp_upload_file(devc, "/sndscape/scope.cod") == 0 ) { - printk(KERN_ERR "sscape: faild to upload file /sndscape/scope.cod\n"); - sscape_pnp_free_dma(devc); - return; - } - - i = sscape_read_host_ctrl( devc ); - - if ( (i & 0x0F) > 7 ) { - printk(KERN_ERR "sscape: scope.cod faild\n"); - sscape_pnp_free_dma(devc); - return; - } - if ( i & 0x10 ) sscape_write( devc, 7, 0x2F); - code_file_name[21] = (char) ( i & 0x0F) + 0x30; - if (sscape_pnp_upload_file( devc, code_file_name) == 0) { - printk(KERN_ERR "sscape: faild to upload file %s\n", code_file_name); - sscape_pnp_free_dma(devc); - return; - } - - if (devc->ic_type != IC_ODIE) { - sscape_pnp_write_codec( devc, 10, (sscape_pnp_read_codec(devc, 10) & 0x7f) | - ( sscape_mic_enable == 0 ? 0x00 : 0x80) ); - } - sscape_write_host_ctrl2( devc, 0x84, 0x64 ); /* MIDI volume */ - sscape_write_host_ctrl2( devc, 0x86, 0x64 ); /* MIDI volume?? */ - sscape_write_host_ctrl2( devc, 0x8A, sscape_ext_midi); - - sscape_pnp_write_codec ( devc, 6, 0x3f ); //WAV_VOL - sscape_pnp_write_codec ( devc, 7, 0x3f ); //WAV_VOL - sscape_pnp_write_codec ( devc, 2, 0x1F ); //WD_CDXVOLL - sscape_pnp_write_codec ( devc, 3, 0x1F ); //WD_CDXVOLR - - if (devc -> codec_type == 1) { - sscape_pnp_write_codec ( devc, 4, 0x1F ); - sscape_pnp_write_codec ( devc, 5, 0x1F ); - sscape_write_host_ctrl2( devc, 0x88, sscape_mic_enable); - } else { - int t; - sscape_pnp_write_codec ( devc, 0x10, 0x1F << 1); - sscape_pnp_write_codec ( devc, 0x11, 0xC0 | (0x1F << 1)); - - t = sscape_pnp_read_codec( devc, 0x00) & 0xDF; - if ( (sscape_mic_enable == 0)) t |= 0; - else t |= 0x20; - sscape_pnp_write_codec ( devc, 0x00, t); - t = sscape_pnp_read_codec( devc, 0x01) & 0xDF; - if ( (sscape_mic_enable == 0) ) t |= 0; - else t |= 0x20; - sscape_pnp_write_codec ( devc, 0x01, t); - sscape_pnp_write_codec ( devc, 0x40 | 29 , 0x20); - outb(0, devc -> codec); - } - if (devc -> ic_type == IC_OPUS ) { - int i = sscape_read( devc, 9 ); - sscape_write( devc, 9, i | 3 ); - sscape_write( devc, 3, 0x40); - - if (request_region(0x228, 1, "sscape setup junk")) { - outb(0, 0x228); - release_region(0x228,1); - } - sscape_write( devc, 3, (devc -> dma << 4) | 0x80); - sscape_write( devc, 9, i ); - } - - host_close ( devc ); - sscape_pnp_free_dma(devc); -} - -static int __init detect_sscape_pnp(sscape_info* devc) -{ - long i, irq_bits = 0xff; - unsigned int d; - - DDB(printk("Entered detect_sscape_pnp(%x)\n", devc->base)); - - if (!request_region(devc->codec, 2, "sscape codec")) { - printk(KERN_ERR "detect_sscape_pnp: port %x is not free\n", devc->codec); - return 0; - } - - if ((inb(devc->base + 2) & 0x78) != 0) - goto fail; - - d = inb ( devc -> base + 4) & 0xF0; - if (d & 0x80) - goto fail; - - if (d == 0) { - devc->codec_type = 1; - devc->ic_type = IC_ODIE; - } else if ( (d & 0x60) != 0) { - devc->codec_type = 2; - devc->ic_type = IC_OPUS; - } else if ( (d & 0x40) != 0) { /* WTF? */ - devc->codec_type = 2; - devc->ic_type = IC_ODIE; - } else - goto fail; - - sscape_is_pnp = 1; - - outb(0xFA, devc -> base+4); - if ((inb( devc -> base+4) & 0x9F) != 0x0A) - goto fail; - outb(0xFE, devc -> base+4); - if ( (inb(devc -> base+4) & 0x9F) != 0x0E) - goto fail; - if ( (inb(devc -> base+5) & 0x9F) != 0x0E) - goto fail; - - if (devc->codec_type == 2) { - if (devc->codec != devc->base + 8) { - printk("soundscape warning: incorrect codec port specified\n"); - goto fail; - } - d = 0x10 | (sscape_read(devc, 9) & 0xCF); - sscape_write(devc, 9, d); - sscape_write(devc, 6, 0x80); - } else { - //todo: check codec is not base + 8 - } - - d = (sscape_read(devc, 9) & 0x3F) | 0xC0; - sscape_write(devc, 9, d); - - for (i = 0; i < 550000; i++) - if ( !(inb(devc -> codec) & 0x80) ) break; - - d = inb(devc -> codec); - if (d & 0x80) - goto fail; - if ( inb(devc -> codec + 2) == 0xFF) - goto fail; - - sscape_write(devc, 9, sscape_read(devc, 9) & 0x3F ); - - d = inb(devc -> codec) & 0x80; - if ( d == 0) { - printk(KERN_INFO "soundscape: hardware detected\n"); - valid_interrupts = valid_interrupts_new; - } else { - printk(KERN_INFO "soundscape: board looks like media fx\n"); - valid_interrupts = valid_interrupts_old; - old_hardware = 1; - } - - sscape_write( devc, 9, 0xC0 | (sscape_read(devc, 9) & 0x3F) ); - - for (i = 0; i < 550000; i++) - if ( !(inb(devc -> codec) & 0x80)) - break; - - sscape_pnp_init_hw(devc); - - for (i = 0; i < 4; i++) - { - if (devc->codec_irq == valid_interrupts[i]) { - irq_bits = i; - break; - } - } - sscape_write(devc, GA_INTENA_REG, 0x00); - sscape_write(devc, GA_DMACFG_REG, 0x50); - sscape_write(devc, GA_DMAA_REG, 0x70); - sscape_write(devc, GA_DMAB_REG, 0x20); - sscape_write(devc, GA_INTCFG_REG, 0xf0); - sscape_write(devc, GA_CDCFG_REG, 0x89 | (devc->dma << 4) | (irq_bits << 1)); - - sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 0) | 0x20); - sscape_pnp_write_codec( devc, 0, sscape_pnp_read_codec( devc, 1) | 0x20); - - return 1; -fail: - release_region(devc->codec, 2); - return 0; -} - -static int __init probe_sscape(struct address_info *hw_config) -{ - devc->base = hw_config->io_base; - devc->irq = hw_config->irq; - devc->dma = hw_config->dma; - devc->osp = hw_config->osp; - -#ifdef SSCAPE_DEBUG1 - /* - * Temporary debugging aid. Print contents of the registers before - * changing them. - */ - { - int i; - - for (i = 0; i < 13; i++) - printk("I%d = %02x (old value)\n", i, sscape_read(devc, i)); - } -#endif - devc->failed = 1; - - sscape_ports = request_region(devc->base, 2, "mpu401"); - if (!sscape_ports) - return 0; - - if (!request_region(devc->base + 2, 6, "SoundScape")) { - release_region(devc->base, 2); - return 0; - } - - if (!detect_ga(devc)) { - if (detect_sscape_pnp(devc)) - return 1; - release_region(devc->base, 2); - release_region(devc->base + 2, 6); - return 0; - } - - if (old_hardware) /* Check that it's really an old Spea/Reveal card. */ - { - unsigned char tmp; - int cc; - - if (!((tmp = sscape_read(devc, GA_HMCTL_REG)) & 0xc0)) - { - sscape_write(devc, GA_HMCTL_REG, tmp | 0x80); - for (cc = 0; cc < 200000; ++cc) - inb(devc->base + ODIE_ADDR); - } - } - return 1; -} - -static int __init init_ss_ms_sound(struct address_info *hw_config) -{ - int i, irq_bits = 0xff; - int ad_flags = 0; - struct resource *ports; - - if (devc->failed) - { - printk(KERN_ERR "soundscape: Card not detected\n"); - return 0; - } - if (devc->ok == 0) - { - printk(KERN_ERR "soundscape: Invalid initialization order.\n"); - return 0; - } - for (i = 0; i < 4; i++) - { - if (hw_config->irq == valid_interrupts[i]) - { - irq_bits = i; - break; - } - } - if (irq_bits == 0xff) { - printk(KERN_ERR "soundscape: Invalid MSS IRQ%d\n", hw_config->irq); - return 0; - } - - if (old_hardware) - ad_flags = 0x12345677; /* Tell that we may have a CS4248 chip (Spea-V7 Media FX) */ - else if (sscape_is_pnp) - ad_flags = 0x87654321; /* Tell that we have a soundscape pnp with 1845 chip */ - - ports = request_region(hw_config->io_base, 4, "ad1848"); - if (!ports) { - printk(KERN_ERR "soundscape: ports busy\n"); - return 0; - } - - if (!ad1848_detect(ports, &ad_flags, hw_config->osp)) { - release_region(hw_config->io_base, 4); - return 0; - } - - if (!sscape_is_pnp) /*pnp is already setup*/ - { - /* - * Setup the DMA polarity. - */ - sscape_write(devc, GA_DMACFG_REG, 0x50); - - /* - * Take the gate-array off of the DMA channel. - */ - sscape_write(devc, GA_DMAB_REG, 0x20); - - /* - * Init the AD1848 (CD-ROM) config reg. - */ - sscape_write(devc, GA_CDCFG_REG, 0x89 | (hw_config->dma << 4) | (irq_bits << 1)); - } - - if (hw_config->irq == devc->irq) - printk(KERN_WARNING "soundscape: Warning! The WSS mode can't share IRQ with MIDI\n"); - - hw_config->slots[0] = ad1848_init( - sscape_is_pnp ? "SoundScape" : "SoundScape PNP", - ports, - hw_config->irq, - hw_config->dma, - hw_config->dma, - 0, - devc->osp, - THIS_MODULE); - - - if (hw_config->slots[0] != -1) /* The AD1848 driver installed itself */ - { - audio_devs[hw_config->slots[0]]->coproc = &sscape_coproc_operations; - devc->codec_audiodev = hw_config->slots[0]; - devc->my_audiodev = hw_config->slots[0]; - - /* Set proper routings here (what are they) */ - AD1848_REROUTE(SOUND_MIXER_LINE1, SOUND_MIXER_LINE); - } - -#ifdef SSCAPE_DEBUG5 - /* - * Temporary debugging aid. Print contents of the registers - * after the AD1848 device has been initialized. - */ - { - int i; - - for (i = 0; i < 13; i++) - printk("I%d = %02x\n", i, sscape_read(devc, i)); - } -#endif - return 1; -} - -static void __exit unload_sscape(struct address_info *hw_config) -{ - release_region(devc->base + 2, 6); - unload_mpu401(hw_config); - if (sscape_is_pnp) - release_region(devc->codec, 2); -} - -static void __exit unload_ss_ms_sound(struct address_info *hw_config) -{ - ad1848_unload(hw_config->io_base, - hw_config->irq, - devc->dma, - devc->dma, - 0); - sound_unload_audiodev(hw_config->slots[0]); -} - -static struct address_info cfg; -static struct address_info cfg_mpu; - -static int __initdata spea = -1; -static int mss = 0; -static int __initdata dma = -1; -static int __initdata irq = -1; -static int __initdata io = -1; -static int __initdata mpu_irq = -1; -static int __initdata mpu_io = -1; - -module_param(dma, int, 0); -module_param(irq, int, 0); -module_param(io, int, 0); -module_param(spea, int, 0); /* spea=0/1 set the old_hardware */ -module_param(mpu_irq, int, 0); -module_param(mpu_io, int, 0); -module_param(mss, int, 0); - -static int __init init_sscape(void) -{ - printk(KERN_INFO "Soundscape driver Copyright (C) by Hannu Savolainen 1993-1996\n"); - - cfg.irq = irq; - cfg.dma = dma; - cfg.io_base = io; - - cfg_mpu.irq = mpu_irq; - cfg_mpu.io_base = mpu_io; - /* WEH - Try to get right dma channel */ - cfg_mpu.dma = dma; - - devc->codec = cfg.io_base; - devc->codec_irq = cfg.irq; - devc->codec_type = 0; - devc->ic_type = 0; - devc->raw_buf = NULL; - spin_lock_init(&devc->lock); - - if (cfg.dma == -1 || cfg.irq == -1 || cfg.io_base == -1) { - printk(KERN_ERR "DMA, IRQ, and IO port must be specified.\n"); - return -EINVAL; - } - - if (cfg_mpu.irq == -1 && cfg_mpu.io_base != -1) { - printk(KERN_ERR "MPU_IRQ must be specified if MPU_IO is set.\n"); - return -EINVAL; - } - - if(spea != -1) { - old_hardware = spea; - printk(KERN_INFO "Forcing %s hardware support.\n", - spea?"new":"old"); - } - if (probe_sscape(&cfg_mpu) == 0) - return -ENODEV; - - attach_sscape(&cfg_mpu); - - mss = init_ss_ms_sound(&cfg); - - return 0; -} - -static void __exit cleanup_sscape(void) -{ - if (mss) - unload_ss_ms_sound(&cfg); - unload_sscape(&cfg_mpu); -} - -module_init(init_sscape); -module_exit(cleanup_sscape); - -#ifndef MODULE -static int __init setup_sscape(char *str) -{ - /* io, irq, dma, mpu_io, mpu_irq */ - int ints[6]; - - str = get_options(str, ARRAY_SIZE(ints), ints); - - io = ints[1]; - irq = ints[2]; - dma = ints[3]; - mpu_io = ints[4]; - mpu_irq = ints[5]; - - return 1; -} - -__setup("sscape=", setup_sscape); -#endif -MODULE_LICENSE("GPL"); |