1 files changed, 17 insertions, 9 deletions

diff --git a/sound/pci/cs5535audio/cs5535audio_pm.c b/sound/pci/cs5535audio/cs5535audio_pm.c
index 3e4d198a450..838708f6d45 100644
--- a/sound/pci/cs5535audio/cs5535audio_pm.c
+++ b/sound/pci/cs5535audio/cs5535audio_pm.c
@@ -64,18 +64,21 @@ int snd_cs5535audio_suspend(struct pci_dev *pci, pm_message_t state)
 	int i;
 
 	snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
+	snd_pcm_suspend_all(cs5535au->pcm);
+	snd_ac97_suspend(cs5535au->ac97);
 	for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
 		struct cs5535audio_dma *dma = &cs5535au->dmas[i];
-		if (dma && dma->substream && !dma->suspended) 
+		if (dma && dma->substream)
 			dma->saved_prd = dma->ops->read_prd(cs5535au);
 	}
-	snd_pcm_suspend_all(cs5535au->pcm);
-	snd_ac97_suspend(cs5535au->ac97);
 	/* save important regs, then disable aclink in hw */
 	snd_cs5535audio_stop_hardware(cs5535au);
 
+	if (pci_save_state(pci)) {
+		printk(KERN_ERR "cs5535audio: pci_save_state failed!\n");
+		return -EIO;
+	}
 	pci_disable_device(pci);
-	pci_save_state(pci);
 	pci_set_power_state(pci, pci_choose_state(pci, state));
 	return 0;
 }
@@ -89,7 +92,12 @@ int snd_cs5535audio_resume(struct pci_dev *pci)
 	int i;
 
 	pci_set_power_state(pci, PCI_D0);
-	pci_restore_state(pci);
+	if (pci_restore_state(pci) < 0) {
+		printk(KERN_ERR "cs5535audio: pci_restore_state failed, "
+		       "disabling device\n");
+		snd_card_disconnect(card);
+		return -EIO;
+	}
 	if (pci_enable_device(pci) < 0) {
 		printk(KERN_ERR "cs5535audio: pci_enable_device failed, "
 		       "disabling device\n");
@@ -112,17 +120,17 @@ int snd_cs5535audio_resume(struct pci_dev *pci)
 	if (!timeout)
 		snd_printk(KERN_ERR "Failure getting AC Link ready\n");
 
-	/* we depend on ac97 to perform the codec power up */
-	snd_ac97_resume(cs5535au->ac97);
 	/* set up rate regs, dma. actual initiation is done in trig */
 	for (i = 0; i < NUM_CS5535AUDIO_DMAS; i++) {
 		struct cs5535audio_dma *dma = &cs5535au->dmas[i];
-		if (dma && dma->substream && dma->suspended) {
+		if (dma && dma->substream) {
 			dma->substream->ops->prepare(dma->substream);
 			dma->ops->setup_prd(cs5535au, dma->saved_prd);
 		}
 	}
-		
+
+	/* we depend on ac97 to perform the codec power up */
+	snd_ac97_resume(cs5535au->ac97);
 	snd_power_change_state(card, SNDRV_CTL_POWER_D0);
 
 	return 0;