aboutsummaryrefslogtreecommitdiff
path: root/sound/soc/fsl/fsl_ssi.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/fsl/fsl_ssi.c')
-rw-r--r--sound/soc/fsl/fsl_ssi.c644
1 files changed, 644 insertions, 0 deletions
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
new file mode 100644
index 00000000000..145ad13d52d
--- /dev/null
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -0,0 +1,644 @@
+/*
+ * Freescale SSI ALSA SoC Digital Audio Interface (DAI) driver
+ *
+ * Author: Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2007-2008 Freescale Semiconductor, Inc. This file is licensed
+ * under the terms of the GNU General Public License version 2. This
+ * program is licensed "as is" without any warranty of any kind, whether
+ * express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+
+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <asm/immap_86xx.h>
+
+#include "fsl_ssi.h"
+
+/**
+ * FSLSSI_I2S_RATES: sample rates supported by the I2S
+ *
+ * This driver currently only supports the SSI running in I2S slave mode,
+ * which means the codec determines the sample rate. Therefore, we tell
+ * ALSA that we support all rates and let the codec driver decide what rates
+ * are really supported.
+ */
+#define FSLSSI_I2S_RATES (SNDRV_PCM_RATE_5512 | SNDRV_PCM_RATE_8000_192000 | \
+ SNDRV_PCM_RATE_CONTINUOUS)
+
+/**
+ * FSLSSI_I2S_FORMATS: audio formats supported by the SSI
+ *
+ * This driver currently only supports the SSI running in I2S slave mode.
+ *
+ * The SSI has a limitation in that the samples must be in the same byte
+ * order as the host CPU. This is because when multiple bytes are written
+ * to the STX register, the bytes and bits must be written in the same
+ * order. The STX is a shift register, so all the bits need to be aligned
+ * (bit-endianness must match byte-endianness). Processors typically write
+ * the bits within a byte in the same order that the bytes of a word are
+ * written in. So if the host CPU is big-endian, then only big-endian
+ * samples will be written to STX properly.
+ */
+#ifdef __BIG_ENDIAN
+#define FSLSSI_I2S_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | \
+ SNDRV_PCM_FMTBIT_S18_3BE | SNDRV_PCM_FMTBIT_S20_3BE | \
+ SNDRV_PCM_FMTBIT_S24_3BE | SNDRV_PCM_FMTBIT_S24_BE)
+#else
+#define FSLSSI_I2S_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+ SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_LE)
+#endif
+
+/**
+ * fsl_ssi_private: per-SSI private data
+ *
+ * @name: short name for this device ("SSI0", "SSI1", etc)
+ * @ssi: pointer to the SSI's registers
+ * @ssi_phys: physical address of the SSI registers
+ * @irq: IRQ of this SSI
+ * @dev: struct device pointer
+ * @playback: the number of playback streams opened
+ * @capture: the number of capture streams opened
+ * @cpu_dai: the CPU DAI for this device
+ * @dev_attr: the sysfs device attribute structure
+ * @stats: SSI statistics
+ */
+struct fsl_ssi_private {
+ char name[8];
+ struct ccsr_ssi __iomem *ssi;
+ dma_addr_t ssi_phys;
+ unsigned int irq;
+ struct device *dev;
+ unsigned int playback;
+ unsigned int capture;
+ struct snd_soc_cpu_dai cpu_dai;
+ struct device_attribute dev_attr;
+
+ struct {
+ unsigned int rfrc;
+ unsigned int tfrc;
+ unsigned int cmdau;
+ unsigned int cmddu;
+ unsigned int rxt;
+ unsigned int rdr1;
+ unsigned int rdr0;
+ unsigned int tde1;
+ unsigned int tde0;
+ unsigned int roe1;
+ unsigned int roe0;
+ unsigned int tue1;
+ unsigned int tue0;
+ unsigned int tfs;
+ unsigned int rfs;
+ unsigned int tls;
+ unsigned int rls;
+ unsigned int rff1;
+ unsigned int rff0;
+ unsigned int tfe1;
+ unsigned int tfe0;
+ } stats;
+};
+
+/**
+ * fsl_ssi_isr: SSI interrupt handler
+ *
+ * Although it's possible to use the interrupt handler to send and receive
+ * data to/from the SSI, we use the DMA instead. Programming is more
+ * complicated, but the performance is much better.
+ *
+ * This interrupt handler is used only to gather statistics.
+ *
+ * @irq: IRQ of the SSI device
+ * @dev_id: pointer to the ssi_private structure for this SSI device
+ */
+static irqreturn_t fsl_ssi_isr(int irq, void *dev_id)
+{
+ struct fsl_ssi_private *ssi_private = dev_id;
+ struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+ irqreturn_t ret = IRQ_NONE;
+ __be32 sisr;
+ __be32 sisr2 = 0;
+
+ /* We got an interrupt, so read the status register to see what we
+ were interrupted for. We mask it with the Interrupt Enable register
+ so that we only check for events that we're interested in.
+ */
+ sisr = in_be32(&ssi->sisr) & in_be32(&ssi->sier);
+
+ if (sisr & CCSR_SSI_SISR_RFRC) {
+ ssi_private->stats.rfrc++;
+ sisr2 |= CCSR_SSI_SISR_RFRC;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_TFRC) {
+ ssi_private->stats.tfrc++;
+ sisr2 |= CCSR_SSI_SISR_TFRC;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_CMDAU) {
+ ssi_private->stats.cmdau++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_CMDDU) {
+ ssi_private->stats.cmddu++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_RXT) {
+ ssi_private->stats.rxt++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_RDR1) {
+ ssi_private->stats.rdr1++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_RDR0) {
+ ssi_private->stats.rdr0++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_TDE1) {
+ ssi_private->stats.tde1++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_TDE0) {
+ ssi_private->stats.tde0++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_ROE1) {
+ ssi_private->stats.roe1++;
+ sisr2 |= CCSR_SSI_SISR_ROE1;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_ROE0) {
+ ssi_private->stats.roe0++;
+ sisr2 |= CCSR_SSI_SISR_ROE0;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_TUE1) {
+ ssi_private->stats.tue1++;
+ sisr2 |= CCSR_SSI_SISR_TUE1;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_TUE0) {
+ ssi_private->stats.tue0++;
+ sisr2 |= CCSR_SSI_SISR_TUE0;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_TFS) {
+ ssi_private->stats.tfs++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_RFS) {
+ ssi_private->stats.rfs++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_TLS) {
+ ssi_private->stats.tls++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_RLS) {
+ ssi_private->stats.rls++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_RFF1) {
+ ssi_private->stats.rff1++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_RFF0) {
+ ssi_private->stats.rff0++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_TFE1) {
+ ssi_private->stats.tfe1++;
+ ret = IRQ_HANDLED;
+ }
+
+ if (sisr & CCSR_SSI_SISR_TFE0) {
+ ssi_private->stats.tfe0++;
+ ret = IRQ_HANDLED;
+ }
+
+ /* Clear the bits that we set */
+ if (sisr2)
+ out_be32(&ssi->sisr, sisr2);
+
+ return ret;
+}
+
+/**
+ * fsl_ssi_startup: create a new substream
+ *
+ * This is the first function called when a stream is opened.
+ *
+ * If this is the first stream open, then grab the IRQ and program most of
+ * the SSI registers.
+ */
+static int fsl_ssi_startup(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data;
+
+ /*
+ * If this is the first stream opened, then request the IRQ
+ * and initialize the SSI registers.
+ */
+ if (!ssi_private->playback && !ssi_private->capture) {
+ struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+ int ret;
+
+ ret = request_irq(ssi_private->irq, fsl_ssi_isr, 0,
+ ssi_private->name, ssi_private);
+ if (ret < 0) {
+ dev_err(substream->pcm->card->dev,
+ "could not claim irq %u\n", ssi_private->irq);
+ return ret;
+ }
+
+ /*
+ * Section 16.5 of the MPC8610 reference manual says that the
+ * SSI needs to be disabled before updating the registers we set
+ * here.
+ */
+ clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+
+ /*
+ * Program the SSI into I2S Slave Non-Network Synchronous mode.
+ * Also enable the transmit and receive FIFO.
+ *
+ * FIXME: Little-endian samples require a different shift dir
+ */
+ clrsetbits_be32(&ssi->scr, CCSR_SSI_SCR_I2S_MODE_MASK,
+ CCSR_SSI_SCR_TFR_CLK_DIS |
+ CCSR_SSI_SCR_I2S_MODE_SLAVE | CCSR_SSI_SCR_SYN);
+
+ out_be32(&ssi->stcr,
+ CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 |
+ CCSR_SSI_STCR_TFSI | CCSR_SSI_STCR_TEFS |
+ CCSR_SSI_STCR_TSCKP);
+
+ out_be32(&ssi->srcr,
+ CCSR_SSI_SRCR_RXBIT0 | CCSR_SSI_SRCR_RFEN0 |
+ CCSR_SSI_SRCR_RFSI | CCSR_SSI_SRCR_REFS |
+ CCSR_SSI_SRCR_RSCKP);
+
+ /*
+ * The DC and PM bits are only used if the SSI is the clock
+ * master.
+ */
+
+ /* 4. Enable the interrupts and DMA requests */
+ out_be32(&ssi->sier,
+ CCSR_SSI_SIER_TFRC_EN | CCSR_SSI_SIER_TDMAE |
+ CCSR_SSI_SIER_TIE | CCSR_SSI_SIER_TUE0_EN |
+ CCSR_SSI_SIER_TUE1_EN | CCSR_SSI_SIER_RFRC_EN |
+ CCSR_SSI_SIER_RDMAE | CCSR_SSI_SIER_RIE |
+ CCSR_SSI_SIER_ROE0_EN | CCSR_SSI_SIER_ROE1_EN);
+
+ /*
+ * Set the watermark for transmit FIFI 0 and receive FIFO 0. We
+ * don't use FIFO 1. Since the SSI only supports stereo, the
+ * watermark should never be an odd number.
+ */
+ out_be32(&ssi->sfcsr,
+ CCSR_SSI_SFCSR_TFWM0(6) | CCSR_SSI_SFCSR_RFWM0(2));
+
+ /*
+ * We keep the SSI disabled because if we enable it, then the
+ * DMA controller will start. It's not supposed to start until
+ * the SCR.TE (or SCR.RE) bit is set, but it does anyway. The
+ * DMA controller will transfer one "BWC" of data (i.e. the
+ * amount of data that the MR.BWC bits are set to). The reason
+ * this is bad is because at this point, the PCM driver has not
+ * finished initializing the DMA controller.
+ */
+ }
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ ssi_private->playback++;
+
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+ ssi_private->capture++;
+
+ return 0;
+}
+
+/**
+ * fsl_ssi_prepare: prepare the SSI.
+ *
+ * Most of the SSI registers have been programmed in the startup function,
+ * but the word length must be programmed here. Unfortunately, programming
+ * the SxCCR.WL bits requires the SSI to be temporarily disabled. This can
+ * cause a problem with supporting simultaneous playback and capture. If
+ * the SSI is already playing a stream, then that stream may be temporarily
+ * stopped when you start capture.
+ *
+ * Note: The SxCCR.DC and SxCCR.PM bits are only used if the SSI is the
+ * clock master.
+ */
+static int fsl_ssi_prepare(struct snd_pcm_substream *substream)
+{
+ struct snd_pcm_runtime *runtime = substream->runtime;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data;
+
+ struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+ u32 wl;
+
+ wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format));
+
+ clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl);
+ else
+ clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl);
+
+ setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+
+ return 0;
+}
+
+/**
+ * fsl_ssi_trigger: start and stop the DMA transfer.
+ *
+ * This function is called by ALSA to start, stop, pause, and resume the DMA
+ * transfer of data.
+ *
+ * The DMA channel is in external master start and pause mode, which
+ * means the SSI completely controls the flow of data.
+ */
+static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data;
+ struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+
+ switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_RESUME:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ setbits32(&ssi->scr, CCSR_SSI_SCR_TE);
+ } else {
+ setbits32(&ssi->scr, CCSR_SSI_SCR_RE);
+
+ /*
+ * I think we need this delay to allow time for the SSI
+ * to put data into its FIFO. Without it, ALSA starts
+ * to complain about overruns.
+ */
+ msleep(1);
+ }
+ break;
+
+ case SNDRV_PCM_TRIGGER_STOP:
+ case SNDRV_PCM_TRIGGER_SUSPEND:
+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ clrbits32(&ssi->scr, CCSR_SSI_SCR_TE);
+ else
+ clrbits32(&ssi->scr, CCSR_SSI_SCR_RE);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * fsl_ssi_shutdown: shutdown the SSI
+ *
+ * Shutdown the SSI if there are no other substreams open.
+ */
+static void fsl_ssi_shutdown(struct snd_pcm_substream *substream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ ssi_private->playback--;
+
+ if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
+ ssi_private->capture--;
+
+ /*
+ * If this is the last active substream, disable the SSI and release
+ * the IRQ.
+ */
+ if (!ssi_private->playback && !ssi_private->capture) {
+ struct ccsr_ssi __iomem *ssi = ssi_private->ssi;
+
+ clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN);
+
+ free_irq(ssi_private->irq, ssi_private);
+ }
+}
+
+/**
+ * fsl_ssi_set_sysclk: set the clock frequency and direction
+ *
+ * This function is called by the machine driver to tell us what the clock
+ * frequency and direction are.
+ *
+ * Currently, we only support operating as a clock slave (SND_SOC_CLOCK_IN),
+ * and we don't care about the frequency. Return an error if the direction
+ * is not SND_SOC_CLOCK_IN.
+ *
+ * @clk_id: reserved, should be zero
+ * @freq: the frequency of the given clock ID, currently ignored
+ * @dir: SND_SOC_CLOCK_IN (clock slave) or SND_SOC_CLOCK_OUT (clock master)
+ */
+static int fsl_ssi_set_sysclk(struct snd_soc_cpu_dai *cpu_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+
+ return (dir == SND_SOC_CLOCK_IN) ? 0 : -EINVAL;
+}
+
+/**
+ * fsl_ssi_set_fmt: set the serial format.
+ *
+ * This function is called by the machine driver to tell us what serial
+ * format to use.
+ *
+ * Currently, we only support I2S mode. Return an error if the format is
+ * not SND_SOC_DAIFMT_I2S.
+ *
+ * @format: one of SND_SOC_DAIFMT_xxx
+ */
+static int fsl_ssi_set_fmt(struct snd_soc_cpu_dai *cpu_dai, unsigned int format)
+{
+ return (format == SND_SOC_DAIFMT_I2S) ? 0 : -EINVAL;
+}
+
+/**
+ * fsl_ssi_dai_template: template CPU DAI for the SSI
+ */
+static struct snd_soc_cpu_dai fsl_ssi_dai_template = {
+ .playback = {
+ /* The SSI does not support monaural audio. */
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = FSLSSI_I2S_RATES,
+ .formats = FSLSSI_I2S_FORMATS,
+ },
+ .capture = {
+ .channels_min = 2,
+ .channels_max = 2,
+ .rates = FSLSSI_I2S_RATES,
+ .formats = FSLSSI_I2S_FORMATS,
+ },
+ .ops = {
+ .startup = fsl_ssi_startup,
+ .prepare = fsl_ssi_prepare,
+ .shutdown = fsl_ssi_shutdown,
+ .trigger = fsl_ssi_trigger,
+ },
+ .dai_ops = {
+ .set_sysclk = fsl_ssi_set_sysclk,
+ .set_fmt = fsl_ssi_set_fmt,
+ },
+};
+
+/**
+ * fsl_sysfs_ssi_show: display SSI statistics
+ *
+ * Display the statistics for the current SSI device.
+ */
+static ssize_t fsl_sysfs_ssi_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fsl_ssi_private *ssi_private =
+ container_of(attr, struct fsl_ssi_private, dev_attr);
+ ssize_t length;
+
+ length = sprintf(buf, "rfrc=%u", ssi_private->stats.rfrc);
+ length += sprintf(buf + length, "\ttfrc=%u", ssi_private->stats.tfrc);
+ length += sprintf(buf + length, "\tcmdau=%u", ssi_private->stats.cmdau);
+ length += sprintf(buf + length, "\tcmddu=%u", ssi_private->stats.cmddu);
+ length += sprintf(buf + length, "\trxt=%u", ssi_private->stats.rxt);
+ length += sprintf(buf + length, "\trdr1=%u", ssi_private->stats.rdr1);
+ length += sprintf(buf + length, "\trdr0=%u", ssi_private->stats.rdr0);
+ length += sprintf(buf + length, "\ttde1=%u", ssi_private->stats.tde1);
+ length += sprintf(buf + length, "\ttde0=%u", ssi_private->stats.tde0);
+ length += sprintf(buf + length, "\troe1=%u", ssi_private->stats.roe1);
+ length += sprintf(buf + length, "\troe0=%u", ssi_private->stats.roe0);
+ length += sprintf(buf + length, "\ttue1=%u", ssi_private->stats.tue1);
+ length += sprintf(buf + length, "\ttue0=%u", ssi_private->stats.tue0);
+ length += sprintf(buf + length, "\ttfs=%u", ssi_private->stats.tfs);
+ length += sprintf(buf + length, "\trfs=%u", ssi_private->stats.rfs);
+ length += sprintf(buf + length, "\ttls=%u", ssi_private->stats.tls);
+ length += sprintf(buf + length, "\trls=%u", ssi_private->stats.rls);
+ length += sprintf(buf + length, "\trff1=%u", ssi_private->stats.rff1);
+ length += sprintf(buf + length, "\trff0=%u", ssi_private->stats.rff0);
+ length += sprintf(buf + length, "\ttfe1=%u", ssi_private->stats.tfe1);
+ length += sprintf(buf + length, "\ttfe0=%u\n", ssi_private->stats.tfe0);
+
+ return length;
+}
+
+/**
+ * fsl_ssi_create_dai: create a snd_soc_cpu_dai structure
+ *
+ * This function is called by the machine driver to create a snd_soc_cpu_dai
+ * structure. The function creates an ssi_private object, which contains
+ * the snd_soc_cpu_dai. It also creates the sysfs statistics device.
+ */
+struct snd_soc_cpu_dai *fsl_ssi_create_dai(struct fsl_ssi_info *ssi_info)
+{
+ struct snd_soc_cpu_dai *fsl_ssi_dai;
+ struct fsl_ssi_private *ssi_private;
+ int ret = 0;
+ struct device_attribute *dev_attr;
+
+ ssi_private = kzalloc(sizeof(struct fsl_ssi_private), GFP_KERNEL);
+ if (!ssi_private) {
+ dev_err(ssi_info->dev, "could not allocate DAI object\n");
+ return NULL;
+ }
+ memcpy(&ssi_private->cpu_dai, &fsl_ssi_dai_template,
+ sizeof(struct snd_soc_cpu_dai));
+
+ fsl_ssi_dai = &ssi_private->cpu_dai;
+ dev_attr = &ssi_private->dev_attr;
+
+ sprintf(ssi_private->name, "ssi%u", (u8) ssi_info->id);
+ ssi_private->ssi = ssi_info->ssi;
+ ssi_private->ssi_phys = ssi_info->ssi_phys;
+ ssi_private->irq = ssi_info->irq;
+ ssi_private->dev = ssi_info->dev;
+
+ ssi_private->dev->driver_data = fsl_ssi_dai;
+
+ /* Initialize the the device_attribute structure */
+ dev_attr->attr.name = "ssi-stats";
+ dev_attr->attr.mode = S_IRUGO;
+ dev_attr->show = fsl_sysfs_ssi_show;
+
+ ret = device_create_file(ssi_private->dev, dev_attr);
+ if (ret) {
+ dev_err(ssi_info->dev, "could not create sysfs %s file\n",
+ ssi_private->dev_attr.attr.name);
+ kfree(fsl_ssi_dai);
+ return NULL;
+ }
+
+ fsl_ssi_dai->private_data = ssi_private;
+ fsl_ssi_dai->name = ssi_private->name;
+ fsl_ssi_dai->id = ssi_info->id;
+
+ return fsl_ssi_dai;
+}
+EXPORT_SYMBOL_GPL(fsl_ssi_create_dai);
+
+/**
+ * fsl_ssi_destroy_dai: destroy the snd_soc_cpu_dai object
+ *
+ * This function undoes the operations of fsl_ssi_create_dai()
+ */
+void fsl_ssi_destroy_dai(struct snd_soc_cpu_dai *fsl_ssi_dai)
+{
+ struct fsl_ssi_private *ssi_private =
+ container_of(fsl_ssi_dai, struct fsl_ssi_private, cpu_dai);
+
+ device_remove_file(ssi_private->dev, &ssi_private->dev_attr);
+
+ kfree(ssi_private);
+}
+EXPORT_SYMBOL_GPL(fsl_ssi_destroy_dai);
+
+MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
+MODULE_DESCRIPTION("Freescale Synchronous Serial Interface (SSI) ASoC Driver");
+MODULE_LICENSE("GPL");