diff options
Diffstat (limited to 'sound/soc')
-rw-r--r-- | sound/soc/fsl/fsl_dma.c | 7 | ||||
-rw-r--r-- | sound/soc/fsl/fsl_ssi.c | 74 | ||||
-rw-r--r-- | sound/soc/pxa/poodle.c | 8 | ||||
-rw-r--r-- | sound/soc/pxa/tosa.c | 1 | ||||
-rw-r--r-- | sound/soc/soc-dapm.c | 1 |
5 files changed, 73 insertions, 18 deletions
diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c index da2bc590286..7ceea2bba1f 100644 --- a/sound/soc/fsl/fsl_dma.c +++ b/sound/soc/fsl/fsl_dma.c @@ -132,12 +132,17 @@ struct fsl_dma_private { * Since each link descriptor has a 32-bit byte count field, we set * period_bytes_max to the largest 32-bit number. We also have no maximum * number of periods. + * + * Note that we specify SNDRV_PCM_INFO_JOINT_DUPLEX here, but only because a + * limitation in the SSI driver requires the sample rates for playback and + * capture to be the same. */ static const struct snd_pcm_hardware fsl_dma_hardware = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_JOINT_DUPLEX, .formats = FSLDMA_PCM_FORMATS, .rates = FSLDMA_PCM_RATES, .rate_min = 5512, diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 71bff33f552..157a7895ffa 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -67,6 +67,8 @@ * @ssi: pointer to the SSI's registers * @ssi_phys: physical address of the SSI registers * @irq: IRQ of this SSI + * @first_stream: pointer to the stream that was opened first + * @second_stream: pointer to second stream * @dev: struct device pointer * @playback: the number of playback streams opened * @capture: the number of capture streams opened @@ -79,6 +81,8 @@ struct fsl_ssi_private { struct ccsr_ssi __iomem *ssi; dma_addr_t ssi_phys; unsigned int irq; + struct snd_pcm_substream *first_stream; + struct snd_pcm_substream *second_stream; struct device *dev; unsigned int playback; unsigned int capture; @@ -342,6 +346,49 @@ static int fsl_ssi_startup(struct snd_pcm_substream *substream) */ } + if (!ssi_private->first_stream) + ssi_private->first_stream = substream; + else { + /* This is the second stream open, so we need to impose sample + * rate and maybe sample size constraints. Note that this can + * cause a race condition if the second stream is opened before + * the first stream is fully initialized. + * + * We provide some protection by checking to make sure the first + * stream is initialized, but it's not perfect. ALSA sometimes + * re-initializes the driver with a different sample rate or + * size. If the second stream is opened before the first stream + * has received its final parameters, then the second stream may + * be constrained to the wrong sample rate or size. + * + * FIXME: This code does not handle opening and closing streams + * repeatedly. If you open two streams and then close the first + * one, you may not be able to open another stream until you + * close the second one as well. + */ + struct snd_pcm_runtime *first_runtime = + ssi_private->first_stream->runtime; + + if (!first_runtime->rate || !first_runtime->sample_bits) { + dev_err(substream->pcm->card->dev, + "set sample rate and size in %s stream first\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "capture" : "playback"); + return -EAGAIN; + } + + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, + first_runtime->rate, first_runtime->rate); + + snd_pcm_hw_constraint_minmax(substream->runtime, + SNDRV_PCM_HW_PARAM_SAMPLE_BITS, + first_runtime->sample_bits, + first_runtime->sample_bits); + + ssi_private->second_stream = substream; + } + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ssi_private->playback++; @@ -371,18 +418,16 @@ static int fsl_ssi_prepare(struct snd_pcm_substream *substream) struct fsl_ssi_private *ssi_private = rtd->dai->cpu_dai->private_data; struct ccsr_ssi __iomem *ssi = ssi_private->ssi; - u32 wl; - wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format)); + if (substream == ssi_private->first_stream) { + u32 wl; - clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + /* The SSI should always be disabled at this points (SSIEN=0) */ + wl = CCSR_SSI_SxCCR_WL(snd_pcm_format_width(runtime->format)); - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + /* In synchronous mode, the SSI uses STCCR for capture */ clrsetbits_be32(&ssi->stccr, CCSR_SSI_SxCCR_WL_MASK, wl); - else - clrsetbits_be32(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl); - - setbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + } return 0; } @@ -407,9 +452,13 @@ static int fsl_ssi_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - setbits32(&ssi->scr, CCSR_SSI_SCR_TE); + clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + setbits32(&ssi->scr, + CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_TE); } else { - setbits32(&ssi->scr, CCSR_SSI_SCR_RE); + clrbits32(&ssi->scr, CCSR_SSI_SCR_SSIEN); + setbits32(&ssi->scr, + CCSR_SSI_SCR_SSIEN | CCSR_SSI_SCR_RE); /* * I think we need this delay to allow time for the SSI @@ -452,6 +501,11 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream) if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) ssi_private->capture--; + if (ssi_private->first_stream == substream) + ssi_private->first_stream = ssi_private->second_stream; + + ssi_private->second_stream = NULL; + /* * If this is the last active substream, disable the SSI and release * the IRQ. diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c index 65a4e9a8c39..d968cf71b56 100644 --- a/sound/soc/pxa/poodle.c +++ b/sound/soc/pxa/poodle.c @@ -85,17 +85,13 @@ static int poodle_startup(struct snd_pcm_substream *substream) } /* we need to unmute the HP at shutdown as the mute burns power on poodle */ -static int poodle_shutdown(struct snd_pcm_substream *substream) +static void poodle_shutdown(struct snd_pcm_substream *substream) { - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_codec *codec = rtd->socdev->codec; - /* set = unmute headphone */ locomo_gpio_write(&poodle_locomo_device.dev, POODLE_LOCOMO_GPIO_MUTE_L, 1); locomo_gpio_write(&poodle_locomo_device.dev, POODLE_LOCOMO_GPIO_MUTE_R, 1); - return 0; } static int poodle_hw_params(struct snd_pcm_substream *substream, @@ -232,7 +228,7 @@ static const struct soc_enum poodle_enum[] = { SOC_ENUM_SINGLE_EXT(2, spk_function), }; -static const snd_kcontrol_new_t wm8731_poodle_controls[] = { +static const struct snd_kcontrol_new wm8731_poodle_controls[] = { SOC_ENUM_EXT("Jack Function", poodle_enum[0], poodle_get_jack, poodle_set_jack), SOC_ENUM_EXT("Speaker Function", poodle_enum[1], poodle_get_spk, diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index fe6cca9c9e7..22971a0f040 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -33,7 +33,6 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/hardware.h> #include <asm/arch/audio.h> -#include <asm/arch/tosa.h> #include "../codecs/wm9712.h" #include "pxa2xx-pcm.h" diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 820347c9ae4..f9d100bc847 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -470,6 +470,7 @@ int dapm_reg_event(struct snd_soc_dapm_widget *w, return 0; } +EXPORT_SYMBOL_GPL(dapm_reg_event); /* * Scan each dapm widget for complete audio path. |