aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-07-11S2io: Enable msi-x link interrupts.Sreenivasa Honnur
- Enable msi-x link interrupts because the timer based scheduler was getting cancelled causing the link state to be lost with repetitive card up/downs when changing the mtu. - Unmask mac_rmac_link interrupts only for Xframe I and prevent a spurious link interrupt in Xframe II. - Stop the tx queue and indicate link down when card is down Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11S2io: Fix IOMMU overflow checking.Sreenivasa Honnur
- Fix IOMMU overflow checking. As reported by Andi Kleen <ak@linux.intel.com> removed check for zero dma address. Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11via-velocity: add velocity_set_rxbufsize helperFrancois Romieu
It removes a dependancy from velocity_init_rd_ring to dev->mtu. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11via-velocity: move residual free rx descriptors count register updateFrancois Romieu
Updates of the RBRDU have two different meanings depending on their context: 1. the receiving process has not started - the value which is written into the RBRDU register is supposed to be the free rx descriptors count (rounded to a multiple of 4) 2. the receiving process is running - the value increments the count above (sic) The update is currently issued deep inside the rx replenish chain (see velocity_give_many_rx_descs). Let's propagate enough information to the caller so that the rx replenish functions do not depend on hardware any more. It is needed to perform the Rx/Tx buffers housekeeping when MTU changes. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11via-velocity: lean and clean velocity_init_ringsFrancois Romieu
- PCI consistent areas need no memset - use dev_err instead of plain printk - avoid a few casts Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-11via-velocity: remove the bounce buffersFrancois Romieu
Executive summary: the bounce buffers are in my way - they use something like a 64 * 1500 bytes area of PCI consistent area - they are not resized when the MTU changes - they are used - to hand-pad undersized packets. skb_pad anyone ? - to linearize fragmented skbs whose fragment count goes beyond the 7 fragments hardware limit in order to claim scatter-gather support Actually the SG code is commented out and I wonder if it could not be implemented (ab-)using the large send feature of the chipset since the latter should support some multi-descriptor packet transmitting. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by: Séguier Régis <rseguier@e-teleport.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-08netdev: Move atomic queue state bits into netdev_queue.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08net: Delete NETDEVICES_MULTIQUEUE kconfig option.David S. Miller
Multiple TX queue support is a core networking feature. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move _xmit_lock and xmit_lock_owner into netdev_queue.David S. Miller
Accesses are mostly structured such that when there are multiple TX queues the code transformations will be a little bit simpler. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Make qdisc_run take a netdev_queue.David S. Miller
This allows us to use this calling convention all the way down into qdisc_restart(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Make netif_schedule() routines work with netdev_queue objects.David S. Miller
Only plain netif_schedule() remains taking a net_device, mostly as a compatability item while we transition the rest of these interfaces. Everything else calls netif_schedule_queue() or __netif_schedule(), both of which take a netdev_queue pointer. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move gso_skb into netdev_queue.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08mac80211: Decrease number of explicit ->tx_queue references.David S. Miller
Accomplish this by using local variables. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Add qdisc_tx_is_noop() helper and use in IPV6.David S. Miller
This indicates if the NOOP scheduler is what is active for TX on a given device. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08net: Clean up explicit ->tx_queue references in link watch.David S. Miller
First, we add a qdisc_tx_changing() helper which returns true if the qdisc attachment is in transition. Second, we remove an assertion warning which is of limited value and is hard to express precisely in a multiqueue environment. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Add qdisc_all_tx_empty()David S. Miller
This is a helper function, currently used by IRDA. This is being added so that we can contain and isolate as many explicit ->tx_queue references in the tree as possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Add qdisc_reset_all_tx().David S. Miller
Isolate callers that want to simply reset all the TX qdiscs from the details of TX queues. Use this in the ISDN code. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move next_sched into struct netdev_queue.David S. Miller
We schedule queues, not the device, for output queue processing in BH. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Make netem queue agnostic.David S. Miller
It just wants the root qdisc given an arbitrary qdisc, and that is simply qdisc->dev_queue->qdisc Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Stephen Hemminger <shemminger@vyatta.com>
2008-07-08pkt_sched: Kill stats_lock member of struct Qdisc.David S. Miller
It is always equal to qdisc->dev_queue->lock Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Kill qdisc_ingress, use netdev->rx_queue.qdisc instead.David S. Miller
Now that our qdisc management is bi-directional, per-queue, and fully orthogonal, there is no reason to have a special ingress qdisc pointer in struct net_device. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move rest of qdisc state into struct netdev_queueDavid S. Miller
Now qdisc, qdisc_sleeping, and qdisc_list also live there. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: The ingress_lock member is no longer needed.David S. Miller
Every qdisc is assosciated with a queue, and in the case of ingress qdiscs that will now be netdev->rx_queue so using that queue's lock is the thing to do. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move queue_lock into struct netdev_queue.David S. Miller
The lock is now an attribute of the device queue. One thing to notice is that "suspicious" places emerge which will need specific training about multiple queue handling. They are so marked with explicit "netdev->rx_queue" and "netdev->tx_queue" references. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Remove 'dev' member of struct Qdisc.David S. Miller
It can be obtained via the netdev_queue. So create a helper routine, qdisc_dev(), to make the transformations nicer looking. Now, qdisc_alloc() now no longer needs a net_device pointer argument. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Create netdev_queue abstraction.David S. Miller
A netdev_queue is an entity managed by a qdisc. Currently there is one RX and one TX queue, and a netdev_queue merely contains a backpointer to the net_device. The Qdisc struct is augmented with a netdev_queue pointer as well. Eventually the 'dev' Qdisc member will go away and we will have the resulting hierarchy: net_device --> netdev_queue --> Qdisc Also, qdisc_alloc() and qdisc_create_dflt() now take a netdev_queue pointer argument. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08pkt_sched: Remove comment reference to old style TX locking.David S. Miller
We haven't had netdev->tbusy in many years :) Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.c net/mac80211/mlme.c
2008-07-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-07-08vlan: avoid header copying and linearisation where possiblePatrick McHardy
- vlan_dev_reorder_header() is only called on the receive path after calling skb_share_check(). This means we can use skb_cow() since all we need is a writable header. - vlan_dev_hard_header() includes a work-around for some apparently broken out of tree MPLS code. The hard_header functions can expect to always have a headroom of at least there own hard_header_len available, so the reallocation check is unnecessary. - __vlan_put_tag() can use skb_cow_head() to avoid the skb_unshare() copy when the header is writable. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08ipv6: fix race between ipv6_del_addr and DAD timerAndrey Vagin
Consider the following scenario: ipv6_del_addr(ifp) ipv6_ifa_notify(RTM_DELADDR, ifp) ip6_del_rt(ifp->rt) after returning from the ipv6_ifa_notify and enabling BH-s back, but *before* calling the addrconf_del_timer the ifp->timer fires and: addrconf_dad_timer(ifp) addrconf_dad_completed(ifp) ipv6_ifa_notify(RTM_NEWADDR, ifp) ip6_ins_rt(ifp->rt) then return back to the ipv6_del_addr and: in6_ifa_put(ifp) inet6_ifa_finish_destroy(ifp) dst_release(&ifp->rt->u.dst) After this we have an ifp->rt inserted into fib6 lists, but queued for gc, which in turn can result in oopses in the fib6_run_gc. Maybe some other nasty things, but we caught only the oops in gc so far. The solution is to disarm the ifp->timer before flushing the rt from it. Signed-off-by: Andrey Vagin <avagin@parallels.com> Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08net/wireless/nl80211.c: fix endless Netlink callback loop.Julius Volz
Although I only tested similar code (I don't use any of this wireless code), the state maintainance between Netlink dump callback invocations seems wrong here and should lead to an endless loop. There are also other examples in the same file which might have the same problem. Perhaps someone can actually test this (or refute my logic). Take the simple example with only one element in the list (which should fit into the message): 1. invocation: Start: idx = 0, start = 0 Loop: condition (++idx < start) => (1 < 0) => false => no continue, fill one entry, exit loop, return skb->len > 0 2. invocation: Start: idx = 0, start = 1 Loop: condition (++idx < start) => (1 < 1) => false => no continue, fill the same entry again, exit loop, return skb->len > 0 3. invocation: Same as 2. invocation, endless invocation of callback. Also, iterations where the filling of an element fails should not be counted as completed, so idx should not be incremented in this case. Signed-off-by: Julius Volz <juliusv@google.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: Change detection of RTL8187B with USB ID of 8187Larry Finger
Some early versions of RTL8187B devices have a USB ID of 0x8187 rather than the 0x8189 of later models. In addition, it appears that these early units also must be programmed with lower power. Previous patches used the Product ID string to detect this situation, but did not address the low power question. This patch uses the hardware version and sets the power accordingly. Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: updating Kconfig to support RTL8187BHin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: change rtl8187_dev.c to support RTL8187B (part 2)Hin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: change rtl8187_dev.c to support RTL8187B (part 1)Hin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: updating rtl8187_rtl8225.c to support RTL8187BHin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: updating rtl818x.h to support RTL8187BHin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rtl8187: updating rtl8187.h to support RTL8187BHin-Tak Leung
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rt2x00: Fix register commentsIvo van Doorn
Fix some register documentation in the register header files. This allows better parsing by userspace scripts which in turn helps debugging. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08hostap: don't compile prism2_suspend() for hostap_pci without CONFIG_PMPavel Roskin
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08b43legacy: Remove switch statement with 64-bit indexLarry Finger
The gcc 3.4 fork used to compile the MN10300 port emits unwanted __ucmpdi2() calls for switch statements that use a 64bit value. This patch removes such a switch from b43legacy, and makes the code more like that used in b43. Thanks to Adrian Bunk <bunk@kernel.org> for reporting the problem. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rt2x00: Report RX end time for rt2400pciIvo van Doorn
rt2400 is the only currently available rt2x00 driver which supports reporting of the RX end time for frames. Since mac80211 uses this information for IBSS syncing, it is important that it is being reported. v2: Complement 32 bits of RX timestamp with upper 32bits from TSF Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rt2x00: Use ieee80211_hw->workqueue againIvo van Doorn
Remove the rt2x00 singlethreaded workqueue and move the link tuner and packet filter scheduled work to the ieee80211_hw->workqueue again. The only exception is the interface scheduled work handler which uses the mac80211 interface iterator under the RTNL lock. This work needs to be handled on the kernel workqueue to prevent lockdep issues. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rt2x00: Decrease alignment headroomIvo van Doorn
We only need 4 bytes of headroom for alignment purposes in the RX frame. It was previously higher for optimization purposes which are no longer possible due to DMA mappings. v2: Fix patch error Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rt2x00: Remove input_polldev requirements for rfkillIvo van Doorn
With the new rfkill interface there is no longer a need for the input_polldev. Create a delayed_work structure which we can put on the mac80211 workqueue and poll the hardware every 1000ms. v2: Decrease poll frequency from 100ms to 1000ms Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08zd1211rw: beacon config error checkingDaniel Drake
Add some error checking to the new beacon configuration code. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08mac80211: fix lots of kernel-docRandy Dunlap
Fix more than 50 kernel-doc warnings in ieee80211/mac80211 kernel-doc notation. Fix a few typos also. Note: Some fields are marked as TBD and need to have their description corrected. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rfkill: ignore errors from rfkill_toggle_radio in rfkill_add_switchHenrique de Moraes Holschuh
rfkill_add_switch() calls rfkill_toggle_radio() to set the state of a recently registered rfkill class to the current global state [for that rfkill->type]. The rfkill_toggle_radio() call is going to error out if the hardware is RFKILL_STATE_HARD_BLOCKED, and the global state is RFKILL_STATE_UNBLOCKED. That is a quite normal situation which I missed to account for. As things stand, the error return from rfkill_toggle_radio ends up causing rfkill_register to bail out with an error (de-registering the new switch in the process), which is Not Nice. Change rfkill_add_switch() to not return errors because of a failed call to rfkill_toggle_radio(). We can go back to returning errors again (if that's indeed the right thing to do) if we define the exact error codes the rfkill->toggle_radio callbacks are to return in each situation, so that we can ignore the right ones only. Bug reported by "kionez <kionez@anche.no>". Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: kionez <kionez@anche.no> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08rfkill: some minor kernel-doc changes for rfkill_toggle_radioHenrique de Moraes Holschuh
Improve rfkill_toggle_radio's kernel-doc header a bit. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>