aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-09-27[ARM] nommu: add ARM7TDMI core supportHyok S. Choi
This patch adds ARM7TDMI core support which has no cache and no CP15 register(no memory control unit). Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] nommu: manage the CP15 thingsHyok S. Choi
All the current CP15 access codes in ARM arch can be categorized and conditioned by the defines as follows: Related operation Safe condition a. any CP15 access !CPU_CP15 b. alignment trap CPU_CP15_MMU c. D-cache(C-bit) CPU_CP15 d. I-cache CPU_CP15 && !( CPU_ARM610 || CPU_ARM710 || CPU_ARM720 || CPU_ARM740 || CPU_XSCALE || CPU_XSC3 ) e. alternate vector CPU_CP15 && !CPU_ARM740 f. TTB CPU_CP15_MMU g. Domain CPU_CP15_MMU h. FSR/FAR CPU_CP15_MMU For example, alternate vector is supported if and only if "CPU_CP15 && !CPU_ARM740" is satisfied. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] nommu: defines CPU_CP15, CPU_CP15_MMU and CPU_CP15_MPUHyok S. Choi
By merging of uClinux/ARM, we need to treat various CPU cores which have MMU, MPU or even none for memory management. The memory management coprocessors are controlled by CP15 register set and the ARM core family can be categorized by 5 groups by the register ; G-a. CP15 is MMU : 610, 710, 720, 920, 922, 925, 926, 1020, 1020e, 1022, v6 and the derivations sa1100, sa110, xscale, xsc3. G-b. CP15 is MPU : 740, 940, 946, 996, 1156. G-c. CP15 is MPU or MMU : 1026 (selectable by schematic design) G-d. CP15 is exist, but nothing for memory managemnt : 966, 968. G-e. no-CP15 : 7tdmi, 9tdmi, 9e, 9ej This patch defines CPU_CP15, CPU_CP15_MMU and CPU_CP15_MPU. Thus the family can be defined as : - CPU_CP15 only : G-d - CPU_CP15_MMU(implies CPU_CP15) : G-a, G-c(selectable) - CPU_CP15_MPU(implies CPU_CP15) : G-b, G-c(selectable) - !CPU_CP15 : G-e Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] nommu: allows to support module in nommuHyok S. Choi
A simple patch to support module in nommu mode. The vmalloc is used instead of __vmalloc_area which depends on CONFIG_MMU. Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] do_bad_area() always takes current and current->active_mmRussell King
Since do_bad_area() always takes the currently active task and (supposed to) take the currently active MM, there's no point passing them to this function. Instead, obtain references to them inside do_bad_area(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] Add setup_mm_for_reboot() for nommuRussell King
Add an empty setup_mm_for_reboot() function for nommu machines. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] Rename mm-armv.c to pgd.cRussell King
mm-armv.c now only contains the pgd allocation/freeing code, so rename it to have a more sensible filename. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] Move rest of MMU setup code from mm-armv.c to mmu.cRussell King
If we're going to have mmu.c for code which is specific to the MMU machines, we might as well move the other MMU initialisation specific code from mm-armv.c into this new file. This also allows us to make some functions static. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] Split ARM MM initialisation for !mmuRussell King
Move the MMU specific code from init.c into mmu.c, and add nommu fixups to nommu.c Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] Separate page table manipulation code from bootmem initialisationRussell King
nommu does not require the page table manipulation code in the bootmem initialisation paths. Move this into separate inline functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] 3860/1: Versatile PCI config byte accessesPaul Brook
The ARM Versatile board PCI config space read routines are broken for byte accesses. The access uses a byte read, so masking the bottom two bits of the address is wrong. I guess this is a cut/paste error from the the halfword code which uses aligned word access+shift+mask. Signed-off-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] 3859/1: Fix devicemaps_init() XIP_KERNEL odd 1MiB XIP_PHYS_ADDR ↵George G. Davis
translation error The ARM XIP_KERNEL map created in devicemaps_init() is wrong. The map.pfn is rounded down to an even 1MiB section boundary which results in va/pa translations errors when XIP_PHYS_ADDR starts on an odd 1MiB boundary and this causes the kernel to hang. This patch fixes ARM XIP_KERNEL translation errors for the odd 1MiB XIP_PHYS_ADDR boundary case. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] 3858/1: S3C2412: power management codeBen Dooks
Add S3C2412 power management code, and move the core register saving in from s3c2412.c Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-27[ARM] 3854/2: S3C2410 - add machine type for AML M5900 series (resubmitted)David Anders
Add the AML M5900 series to the list of supported machines in the arch/arm/mach-s3c2410 directory. This ensures the core peripherals are registered, and the timer source is configured. if selected in the kernel config the framebuffer registers and mtd partition information are set. This version of the patch has corrected formatting and removed the legacy procfs directory entry. Signed-off-by: David Anders <danders@amltd.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3838/1: ARM: DCC debug console support for ARM11Tony Lindgren
Adds support for CONFIG_DEBUG_ICEDCC for ARM11. Tested on ARM1136 (OMAP2420). Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] Cleanups for 4cc9bd2eaa1063c68341c1c00e66660adcfdf254Russell King
- Document the meaning for OP_SCALAR, OP_SD and add OP_DD. - Formatting cleanups - Remove now redundant code for making compare instructions operate on scalar values. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3789/4: Fix VFP emulation to ignore VECITR for scalar instructionGen FUKATSU
VECITR in Floating-Point Exception register indicates the number of remaining short vector iterations after a potential exception was detected. In case of exception caused by scalar instructions, VECITR is NOT updated. Therefore emulation for VFP must ignore VECITR field and treat "veclen" as zero when recognizing scalar instructing. Signed-off-by: Gen Fukatsu <fukatsu.gen@jp.panasonic.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3792/2: Fix description of ZBOOT_ROM_BSSDan Fandrich
The documentation for the ZBOOT_ROM_BSS config option describes it as "The base address of 64KiB of read/write memory in the target for the ROM-able zImage..." In actuality, it requires more than 100 KiB of space in addition to enough space to hold the decompressed kernel. This patch fixes the description in the Kconfig file. Signed-off-by: Dan Fandrich <dfandrich@intrinsyc.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3853/1: Fix flush_ptrace_access() thinko for nonaliasing VIPT cache caseGeorge G. Davis
Fix thinko in the flush_ptrace_access() "if (expr)" for the ARM VIPT non-aliasing cache case. We only need to flush cache when VM_EXEC is set in vma->vm_flags but "if (expr) always evaluates to true on UP systems for the ARM VIPT non-aliasing cache case. Signed-off-by: George G. Davis <gdavis@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3852/1: convert atomic bitops and __xchg over to ↵Lennert Buytenhek
raw_local_irq_{save,restore} Thomas Gleixner noticed that bitops.h should also use the raw_* irq disable/enable variants, and __xchg needs them as well. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3851/1: iop3xx: add io-data glantank supportLennert Buytenhek
Add support for the IO-Data GLAN Tank, from Martin Michlmayr. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3850/1: iop3xx: add thecus n2100 supportLennert Buytenhek
Add support for the Thecus n2100 (80219-based.) Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3849/1: fix get_unaligned() for gcc >= 4.1Lennert Buytenhek
gcc 4.1's __typeof__ propagates 'const', which breaks get_unaligned(). Rewrite get_unaligned() not to use __typeof__. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3846/1: S3C24XX: Fix osiris memory mapBen Dooks
The memory mapping for the Osiris machine are all off by one bit, and the base address has been fixed for writing (bit25 is being checked by the write, but not on read) Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3844/1: S3C24XX: update s3c2410_defconfigBen Dooks
New s3c2410_defconfig, updated 2.6.18 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3843/1: S3C24XX: Remove modfication lines from commentsBen Dooks
Remove the redundant Modification lines from the top of the files in arch/arm/mach-s3c2410 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3842/1: S3C2412: Rename LCD deviceBen Dooks
The S3C2412 LCD controller is different enough to warrant renaming the platform device. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3841/1: S3C2412: Add new IDCODE 32412003Ben Dooks
Add new code for the S3C2412 Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3840/1: S3C2412: Add machine VSTMSBen Dooks
Add new machine VSTMS Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Thomas Gleixner <tglx@linuxtronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3834/1: iop3xx: remove per-board defconfigsLennert Buytenhek
Remove the old per-board defconfigs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3833/1: iop3xx: add per-mach defconfigsLennert Buytenhek
Add one defconfig for all iop32x boards and one defconfig for all iop33x boards. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3832/1: iop3xx: coding style cleanupLennert Buytenhek
Since the iop32x code isn't iop321-specific, and the iop33x code isn't iop331-specfic, do a s/iop321/iop32x/ and s/iop331/iop33x/, and tidy up the code to conform to the coding style guidelines somewhat better. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3831/1: iop3xx: factor out common register definesLennert Buytenhek
Factor out the register defines for a number of other peripherals common to the iop32x and iop33x. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3830/1: iop3xx: board support file cleanupLennert Buytenhek
Revamp the iop3xx board support: move the support code for each iop board type into its own file, start using platform serial and platform physmap flash devices, switch to a per-board time tick rate, and get rid of the ARCH_EP80219 and STEPD config options by doing the relevant checks at run time. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3829/1: iop3xx: optimise irq entry macrosLennert Buytenhek
Squeeze three instructions out of the iop32x irq demuxer, and nine out of the iop33x irq demuxer by using the hardware vector generator. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3828/1: iop3xx: remove useless loadsp macroLennert Buytenhek
The iop33x loadsp hunk in arch/arm/boot/compressed/head.S serves no purpose -- remove it. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3827/1: iop3xx: add common gpio moduleLennert Buytenhek
Implement the gpio_line_{config,get,set} API for iop3xx. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3826/1: iop3xx: remove IOP3??_IRQ_OFS irq offsetLennert Buytenhek
Get rid of the unused IOP3??_IRQ_OFS irq offset define, start IRQ numbering from zero. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3825/1: iop3xx: use cp6 enable/disable macrosLennert Buytenhek
Add CP6 enable/disable sequences to the timekeeping code and the IRQ code. As a result, we can't depend on CP6 access being enabled when we enter get_irqnr_and_base anymore, so switch the latter over to using memory-mapped accesses for now. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3824/1: iop3xx: add cp6 enable/disable macrosLennert Buytenhek
Add macros to enable and disable access to CP6. On the iop3xx, enabling CP6 access unfortunately also enables access to that coprocessor from unprivileged code, so we need these macros to enable and disable access to the coprocessor whenever we need to access it. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3823/1: iop3xx: switch iop32x/iop33x over to shared time codeLennert Buytenhek
Switch the iop32x and iop33x code over to the common time implementation, and remove the (nearly identical) iop32x and iop33x time implementations. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3822/1: iop3xx: rewrite time handlingLennert Buytenhek
Merge and rewrite the iop32x/iop33x time code to do lost jiffy tracking properly, and put the result in plat-iop/time.c. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3821/1: iop3xx: switch iop32x/iop33x over to shared pci codeLennert Buytenhek
Switch the iop32x and iop33x code over to the common PCI implementation, and remove the (nearly identical) iop32x and iop33x PCI implementations. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3820/1: iop3xx: factor out shared pci codeLennert Buytenhek
Merge the iop32x PCI code and iop33x PCI code into plat-iop/pci.c. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3819/1: iop3xx: factor out shared i2c codeLennert Buytenhek
Move the i2c bits shared between iop32x and iop33x to plat-iop/i2c.c and include/asm-arm/hardware/iop3xx.h. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3818/1: iop3xx: introduce arch/arm/plat-iop for shared iop32x/iop33x codeLennert Buytenhek
Introduce the arch/arm/plat-iop directory, for code shared between the iop32x and iop33x, and move the common memory map setup bits there. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33xLennert Buytenhek
Split the iop3xx mach type into iop32x and iop33x -- split the config symbols, and move the code in the mach-iop3xx directory to the mach-iop32x and mach-iop33x directories. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3816/1: iop3xx: rename config symbolsLennert Buytenhek
Rename CONFIG_ARCH_IOP321 to CONFIG_ARCH_IOP32X and CONFIG_ARCH_IOP331 to CONFIG_ARCH_IOP33X. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-09-25[ARM] 3836/1: S3C24XX: Clear both EINT and INT status before sleepBen Dooks
Clear both the EINT and INT status before going to sleep, otherwise we may end up being woken by something that was not set in our wakeup map. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 21:17:18 +0000