aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-10-28ppc64: use checksum_64.S from powerpcStephen Rothwell
as it is identical to checksum.S from ppc64. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28ppc64: use the merged syscall tableStephen Rothwell
This allows us to also use entry_64.S from the merged tree and reverts the setup_64.c part of fda262b8978d0089758ef9444508434c74113a61. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-28ppc64: Include arch/powerpc/kernel/setup-common.oPaul Mackerras
... which is needed now that ARCH=ppc64 is using the merged setup_64.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28powerpc: Move U3 IOMMU driver to arch/powerpc/sysdevPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27powerpc: Fix new-world powermac detectionPaul Mackerras
My G5 was being reported as an OldWorld in /proc/cpuinfo, which is obviously not right... :) Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27powerpc: Introduce toreal/fromreal assembly macrosPaul Mackerras
On 32-bit platforms, these convert from kernel virtual addresses to real (physical addresses), like tophys/tovirt but they use the same register for the source and destination. On 64-bit platforms, they do nothing because the hardware ignores the top two bits of the address in real mode. These new macros are used in fpu.S now. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27powerpc: 32-bit CHRP SMP fixesPaul Mackerras
Untested, but "should" work... at least this way it compiles. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27powerpc: remove duplicate screen_info from setup_32.cPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] powerpc: Moved dcr support to arch/powerpcKumar Gala
Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] powerpc: Fix warning related to do_dabrKumar Gala
do_dabr() is not relevant on 40x or Book-E processors so dont build it Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] powerpc: Don't use kmalloc() for kernel stacksDavid Gibson
In readiness for 64k pages, when THREAD_SIZE will be less than PAGE_SIZE, ppc64 uses kmalloc() rather than __get_free_pages() to allocate kernel stacks, and since thread_info.h was merged, so does ppc32. However that adds some overhead which we don't really want when PAGE_SIZE <= THREAD_SIZE (including all ppc32 machines), so this patch avoids it. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] powerpc: Merge parport.hDavid Gibson
Save for the header #define, ppc32 and ppc64 versions of parport.h are identical. This patch merges them. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] powerpc: Purge bootinfo.hDavid Gibson
With ARCH=powerpc we assume the presence of a device tree, so we don't require any support for the old bi_recs method of passing boot parameters. Likewise, we've never needed it for ppc64, but we still had an include/asm-ppc64/bootinfo.h from which nothing was used. This patch removes that file, and all references to it in arch/ppc64 and arch/powerpc. A related, unused variable 'boot_mem_size' is also removed from setup_32.c. The bootinfo stuff remains in ARCH=ppc for the time being. Built and booted on Power5 (ARCH=ppc64 and ARCH=powerpc), built for 32-bit powermac (ARCH=powerpc and ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] powerpc: Fix handling of fpscr on 64-bitDavid Gibson
The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] ppc64: remove arch/ppc64/kernel/setup.cPaul Mackerras
and use setup_64.c from the merged tree instead. The only difference between them was the code to set up the syscall maps. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] powerpc: merge scatterlist.hStephen Rothwell
This depends on the 64bit dma_addr_t patch. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27[PATCH] ppc64: make dma_addr_t 64 bitsStephen Rothwell
There has been a need expressed for dma_addr_t to be 64 bits on PPC64. This patch does that. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27powerpc: undeprecate the old OF device tree accessors for nowPaul Mackerras
The recent addition of __deprecated to the declarations for find_devices etc. produces a whole pile of warnings from the ppc32 code. Since those functions still work perfectly well on ppc32, which doesn't have hotplug support for anything in the OF device tree, and we don't have time to fix that code now, remove the __deprecated markings for now. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27powerpc: Remove common stuff from setup_64.cPaul Mackerras
This should have been in commit 03501dab035ab7da5e1373f5e130cfd6346d3f21 but got missed by accident. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: 32-bit powermac needs the mpc106 codePaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Fix incorrect timer register addresses in mpic.cPaul Mackerras
We were computing the wrong address for the MPIC timer registers, so when we went to initialize them we would have been hitting some unrelated ioremap... oops. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc32: Limit memory to lowmem if !CONFIG_HIGHMEM.Paul Mackerras
This trims off the extra unusable memory from the lmb structure, so we don't try to use it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26power: Update the multiple inclusion protection symbol on machdep.hPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Fixes to get the Longtrail CHRP a bit furtherPaul Mackerras
Talk about buggy firmware... the OF on the Longtrail returns 0 from the claim client service rather than -1 when the claim fails. It also has no device_type on the /memory node and blows up if the output buffer for package-to-path is too big. This also fixes a bug with calling alloc_up with align == 0, where we did _ALIGN_UP(alloc_bottom, 0) which will end up as 0. Lastly, we now check the return value (in r3) from calling the prom, and return -1 from call_prom if we get a negative value back. That is supposed to indicate that the requested client service doesn't exist. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Merge 32-bit CHRP support.Paul Mackerras
SMP still needs more work but UP gets as far as starting userspace at least. This uses the 64-bit-style code for spinning up the cpus. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Don't limit pmac_get_rtc_time to return only positive valuesPaul Mackerras
If the machine's clock is set to a bogus value, this check resulted in userland waiting effectively forever for the RTC value to change, so remove the check. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Fix interrupt-tree parsingPaul Mackerras
The interrupt-tree parsing code wasn't offsetting interrupt numbers by 16 on 32-bit platforms with an i8259 interrupt controller, and it was confused about the encoding of interrupt sense and level (which is different for i8259 and openpic interrupt controllers, just to make things interesting). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Pull out MPC106 (grackle) initialization code into its own filePaul Mackerras
This is so that the 32-bit CHRP code can use it. The MPC106 initialization code is now in arch/powerpc/sysdev/grackle.c and is controlled by CONFIG_PPC_MPC106. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Pull common bits of setup_{32,64}.c into setup-common.cPaul Mackerras
This creates a new arch/powerpc/kernel/setup-common.c with various bits that setup_32.c and setup_64.c had in common - functions like machine_shutdown/restart/power_off, show_cpuinfo, set_preferred_console etc. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Merge rtas.c into arch/powerpc/kernelPaul Mackerras
This splits arch/ppc64/kernel/rtas.c into arch/powerpc/kernel/rtas.c, which contains generic RTAS functions useful on any CHRP platform, and arch/powerpc/platforms/pseries/rtas-fw.[ch], which contain some pSeries-specific firmware flashing bits. The parts of rtas.c that are to do with pSeries-specific error logging are protected by a new CONFIG_RTAS_ERROR_LOGGING symbol. The inclusion of rtas.o is controlled by the CONFIG_PPC_RTAS symbol, and the relevant platforms select that. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26powerpc: Merge i8259.c into arch/powerpc/sysdevPaul Mackerras
This changes the parameters for i8259_init so that it takes two parameters: a physical address for generating an interrupt acknowledge cycle, and an interrupt number offset. i8259_init now sets the irq_desc[] for its interrupts; all the callers were doing this, and that code is gone now. This also defines a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and makes the platforms that need it select that symbol. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26ppc: Use the indirect_pci.c from arch/powerpc/sysdevPaul Mackerras
This defines a CONFIG_INDIRECT_PCI symbol to control whether it gets used or not, and fixes the Kconfig to select that symbol for platforms that need it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Move ras.c into arch/powerpc/platforms/pseriesMichael Ellerman
ras.o is only built for CONFIG_PPC_PSERIES, so move it into arch/powerpc/platforms/pseries. Update Makefiles to suit. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Move firmware.h into include/asm-powerpcMichael Ellerman
Move firmware.h into include/asm-powerpc. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Remove trailing \n" in HMT macrosMichael Ellerman
GCC 3.3.3 barfs on the trailing \n" in the HMT macros. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Remove duplicate definition of set_tb()Michael Ellerman
Somewhere along the line we got two definitions of set_tb(). They look to be identical although they're not textually identical. So remove the #ifdef CONFIG_PPC64 version, leaving the common version in time.h. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Some minor cleanups to setup_32.cKumar Gala
* Removed of_show_percpuinfo and just report CPU frequency in generic show_cpuinfo code. * Killed OCP and PPC_SYS related code which doesn't belong in the merge tree Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Add support for Book-E timer config to generic_calibrate_decrKumar Gala
We need to initialize some control SPRS for timers on Book-E before we start taking decrementer interrupts. Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] ppc: Fix m82xx_pci buildBecky Bruce
A recent patch updated the name of pci_assign_all_busses to pci_assign_all_buses. This instance of its use wasn't corrected by the original patch to use the new name. Builds cleanly on ads8272. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Fix types.hBecky Bruce
Powerpc: Fix types.h I noticed that Paul had already pulled the version of types.h that is missing the config.h include into the merge tree - this patch adds it back in. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: merge include/asm-ppc*/checksum.h into ↵Kumar Gala
include/asm-powerpc/checksum.h Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: some prom.c cleanupsKumar Gala
On !CONFIG_PPC_MULTIPLATFORM _machine is defined as 0. This is ok, but we can't assign a value to _machine then. We may not have CONFIG_PCI available, so only build in support for find_parent_pci_resource(), request_OF_resource(), release_OF_resource() if PCI is enabled. This is probably not the long term fix but works out for now. Make reg_property64 contain 64-bit elements on a 32-bit machine. Mark the deprecated prom.c functions as __deprecated. Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-26[PATCH] powerpc: Make sure we have an RTC before trying to adjust itKumar Gala
Its valid for ppc_md.set_rtc_time to be NULL. We need to check that its non-NULL before trying to update the RTC. Signed-off-by: Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-24powerpc: Add a shutdown member to vio_driverStephen Rothwell
Add a shutdown member to struct vio_driver. We also need vio_bus_shutdown() which converts from struct device to struct vio_dev and knows how to extract the struct vio_driver. Original patch adjusted for different location of vio.c. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24powerpc: set the driver.owner field for all vio driversStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24powerpc: iseries: Fix a bogus commentStephen Rothwell
A comment in lpevents.c refers to code that's actually in HvCallEvent.h. The code in HvCallEvent.h is pretty obvious, so just remove the comment altogether. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24powerpc: don't duplicate name between vio_driver and device_driverStephen Rothwell
Just set the name field directly in the device_driver structure contained in the vio_driver struct. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24powerpc: Move include/asm-ppc64/vio.h to include/asm-powerpc/vio.hStephen Rothwell
Move include/asm-ppc64/vio.h to include/asm-powerpc/vio.h, that's it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-24powerpc: Merge arch/ppc64/kernel/vio.c into arch/powerpc/kernel/vio.cStephen Rothwell
Merge arch/ppc64/kernel/vio.c into arch/powerpc/kernel/vio.c, update the Makefiles to make it work, and make ARCH=ppc64 still work. Michael's version put vio.c in arch/powerpc/sysedv but after consolting Paulus, this one puts it in arch/powerpc/kernel. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-23powerpc: Make coff boot wrapper load the kernel at 8MPaul Mackerras
Previously it claimed 7MB starting at the 9M point and loaded the kernel there. That meant that prom_init put the flattened device tree above 16M. On the 601 that caused the early device tree scan to fail, since only 16MB are mapped with BATs on the 601. Moving this down to 8MB allows prom_init to put the flattened device tree between 15M and 16M, so it works on the 601. Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 11:47:20 +0000