aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-01-09V4L/DVB (3254): Don't reprogram the video standard if it is unchanged.Hans Verkuil
- Don't reprogram the video standard if the new standard equals the old standard. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3253): Add V4L2 commands to tvaudioHans Verkuil
- debug messages changed to be like the other modules - Add V4L2 commands VIDIOC_S_TUNER, VIDIOC_G_TUNER, VIDIOC_S_STD and VIDIOC_S_FREQUENCY. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3250): tea5767: move signal strength level to the 0-65535 rangeHans Verkuil
- Move signal strength level to the 0-65535 range as per V4L2 spec. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3249): Generalized cx25840 video/audio input handlingHans Verkuil
- Added VIDIOC_S_AUDIO to set the audio inputs separately. - Removed AUDC_SET_INPUT. - Made the video inputs much more general. - Removed cardtype CID and replaced with a CID to enable the PVR150 workaround. The cardtype is no longer necessary with the general video input change. - Update VIDIOC_LOG_STATUS output to show the video and audio inputs separately. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3214): Calculate the saa7115 AMCLK regs instead of using fixed valuesHans Verkuil
- Calculate the audio master clock registers from the actual frequencies. This simplifies the code and it also prepares for adding CGC2 support. - VIDIOC_INT_AUDIO_CLOCK_FREQ now receives an u32 instead of an enum. It is more generic and actually easier to implement. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3248): Add selected input to saa7115 VIDIOC_LOG_STATUS output.Hans Verkuil
- Add selected input to VIDIOC_LOG_STATUS output. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3247): Replace AUDC_SET_INPUT with VIDIOC_S_AUDIO in wm8775.Hans Verkuil
- Replace AUDC_SET_INPUT with VIDIOC_S_AUDIO. - Added V4L2_CID_AUDIO_MUTE. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3246): Use VIDIOC_S_AUDIO instead of AUDC_SET_INPUT in cs53l32aHans Verkuil
- Replace AUDC_SET_INPUT with VIDIOC_S_AUDIO. - Added V4L2_CID_AUDIO_MUTE. - Minimum volume is -96 dB, not -90. - Show volume in VIDIOC_LOG_STATUS. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3245): Added some comments about multiple tuner support.Hans Verkuil
- Added some comments to make clearer how to use ioctl api to handle multiple tuners at the same board. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3243): add firmware instructions for nxt2002 and nxt2004Michael Krufky
- add firmware instructions for nxt2002 and nxt2004 Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3242): make the firmware dir docs consistent in the v4l-dvb tree.Ville Skytt\ä
- make the firmware dir documentation and comments consistent in the v4l-dvb tree. Signed-off-by: Ville Skyttä <ville.skytta@iki.fi> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3239): reorganize tuner-simple threshold structure.Michael Krufky
- Create an array containing frequency threshold and control byte. - allows for an arbitrary amount of frequency ranges to be set, like dvb-pll. - improves code readability. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3234): Included advanced debug option to tvp5150.cMauro Carvalho Chehab
- Included advanced debug option to tvp5150.c - Now, advanced debug info is the first item at V4L menu. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3233): Fixed API to set I2S speed controlMauro Carvalho Chehab
- Created a new ioctl to control I2S speed. Old calls to an inadequate V4L2 API replaced. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3232): Several improvements at tvp5150 driverMauro Carvalho Chehab
- Now reset do init tvp5150 registers to its default. - Debug messages improved. - Implemented video standard selection function. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3220): Add support for VP-3054 HDTV boardChris Pascoe
- Added support for VP-3054 (aka DigitalNow DNTV Live! DVB-T Pro!). - This board has a secondary I2C bus and remote control. - Added a new module to handle secondary I2C bus on this board. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3218): Whitespace cleanupsMichael Krufky
- minor whitespace cleanups Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3216): saa7134 card #58 has a newer revision with a new subsystem IDRicardo Cerqueira
- Added new ID for different revision of card #58. It's the same card, but with a tda8275a instead of a tda8275 Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3213): Add remote for Compro Videomate Gold+ Pal version.Nickolay V. Shmyrev
- Add remote. Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3202): Initialize the dvb-usb-device-pointer to NULLPatrick Boettcher
- Initialize the the dvb-usb-device-pointer in the -init function to NULL, to be sure that a dvb-usb-device was really initialized. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3201): Remove #ifdef BTTV_BOARD_TWINHAN_VP3021Michael Krufky
- As far back as the video4linux cvs repository goes, there is no mention of BTTV_TWINHAN_VP3021. It seems that this was done for the sake of backwards compatability with some older v4l, but this can no longer be necessary due to the v4l/dvb cvs merger, nor should this have ever existed in the upstream kernel. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3199): Removed some unneeded #ifdef'sMichael Krufky
- Removed some unneeded #ifdef's Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3198): make cx25840 recover from some firmware load failuresTyler Trafford
- In the rare event that a 333MHz i2c firmware load fails after writing some data, this fix makes the driver reset the DL_ADDR registers to the proper values before continuing on with 100MHz transfers. Signed-off-by: Tyler Trafford <tatrafford@comcast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3196): correct Thomson DTT 761x frequency rangesMichael Krufky
- Corrected Thomson DTT 7611 tuner programming, based on spec sheet - renamed to Thomson DTT 761x - applies to DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A (DTT 7610 is similar, but slightly different programming) - corrected frequency ranges for analog and digital modes Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3193): Replace del_timer with del_timer_syncAndrew Morton
- Replace del_timer with del_timer_sync Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3192): Fix bttv sub-device unregisterChristopher Pascoe
- Fixes sub-device release for BTTV. Without this, DVB modules can't be reloaded Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3179): Fix 64-bit compile warningsHans Verkuil
- Fix 64-bit compile warnings Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3178): bttv VBI fixesMichael H. Schimek
- V4L2_(G|S|TRY)_FMT returned incorrect VBI start lines for PAL-M, NTSC-JP, and PAL-60. They also returned an inaccurate VBI offset. - V4L2_(G|S)_FMT and V4L2_TRY_FMT disagreed about the start of VBI capturing in PAL and SECAM second field. Note the start line fixes may break applications using VIDIOCSVBIFMT because this ioctl fails when the driver does not support exactly the requested parameters. - V4L2_TRY_FMT did not clear the reserved field in struct v4l2_vbi_format. - V4L2_(S|TRY)_FMT did not expect very large or small VBI start or count values, returning wrong (but safe) counts due to an overflow. - VIDIOCGVBIFMT confused V4L and V4L2 VBI flags. However this had no effect because the flags have the same value and bttv never sets them. - In v4l_compat_translate_ioctl() the VIDIOC(G|S)VBIFMT code did not expect V4L2 drivers supporting VBI formats besides V4L2_PIX_FMT_GREY. Signed-off-by: Michael H. Schimek <mschimek@gmx.at> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3167): added ntsc parameter to tuner and more standardized debugsMauro Carvalho Chehab
- Debug message changed to be coherent with other modules - added ntsc parameter - parameters moved to the beginning at the file - tuner_status moved to a better position. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3162): Some fixes at cx88 controlsMauro Carvalho Chehab
- Now, default control values at cx88_cx8800_ctls are honored - default value for contrast/saturation were changed to be in line with available documentation for the chipset; - Removed some bad coding at set_control; - U/V Saturation now changes proportionally Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3166): "Philips 1236D ATSC/NTSC dual in" - fix typo.Michael Krufky
- "Philips 1236D ATSC/NTSC dual in" - fix typo. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3161): ir-kbd-gpio is now part of bttvRicardo Cerqueira
- Merged ir-kbd-gpio into bttv as bttv-input, for consistency with other input modules Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3160): Updates to the tveeprom eeprom checkingSteven Toth
Updates to the tveeprom eeprom checking Signed-of-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3159): Replaces MAX()/MIN() by kernel.h max()/min() macrosMauro Carvalho Chehab
- Replaces MAX()/MIN() by kernel.h max()/min() macros Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3154): TTUSB DEC driver patch roundupAlex Woods
- Collection of patches from Peter Beutner addressing: - add symbolrates to the DVB-S frontend description - fix capability flags in DVB-S frontend describtion - remove some void casts - disable zig-zag scanning as it makes no sense for DVB-T - set sensible min_delay value - return an error for requested filter types the driver can't handle Signed-off-by: Peter Beutner <p.beutner@gmx.net> Signed-off-by: Alex Woods <linux-dvb@giblets.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09DVB (2401): USB hot unplug Oops fix.Deti Fliegl
- USB hot unplug Oops fix. Signed-off-by: Deti Fliegl <deti@fliegl.de> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3173): [PATCH] Decrease number of pointer derefs in flexcop-fe-tuner.cJesper Juhl
- Here's a small patch to decrease the number of pointer derefs in drivers/media/dvb/b2c2/flexcop-fe-tuner.c Benefits of the patch: - Fewer pointer dereferences should make the code slightly faster. - Size of generated code is smaller - Improved readability Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3145): syncronizes some changes between v4l and dvbMauro Carvalho Chehab
- digitv_ctrl_msg() if (wo) test is reversed. fixed. - usb timeout is in Hz, not in jiffies. - NULL replaced by 0 to be coherent. - removed uneeded headers. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3130): cx24123: cleanup timout handlingSteven Toth
- Cleanup timeout handling in cx24123_pll_writereg(), and use a reasonable value for the timeout. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3129): correct FE_READ_UNCORRECTED_BLOCKSStephen Williams
- Make FE_READ_UNCORRECTED_BLOCKS reset the count after each call, thus returning a momentary value like all other demods do, instead of an absolute, ever increasing count. Signed-off-by: Stephen Williams <stephen.williams@gmail.com> Signed-off-by: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3123b): syncs V4L subsystem tree with kernelMauro Carvalho Chehab
- This patch makes kernel in sync with v4l subsystem tree. - some lines reordered to be sync. - some reduntant codes removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3123a): remove uneeded #if from V4L subsystemMauro Carvalho Chehab
- some uneeded #if were introduced by a previous patch. this patch removes these. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3123): include reorder to be in sync with V4L treeMauro Carvalho Chehab
- include reorder to be in sync with V4L tree Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3118): Enable remote control on AVERTV STUDIO 303George Gazurkoff
- Enable remote control on AVERTV STUDIO 303 - This patch adapted from a patch found on a website posted by an anonymous user. Thanks to original anonymous author for creating this patch. Tested successfully by George Gazurkoff. Signed-off-by: George Gazurkoff <gazurkoff@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3117): Fix broken TV standard check.Hans Verkuil
- Fix incorrect matching of TV standards leading to incorrect IFPCoff values. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3116): tda9887 improvements: better defaults, better configurability.Hans Verkuil
- Set the tuner takeover point to 0x10 for NTSC/radio and 0x14 for PAL/SECAM. - Allow override through TDA9887_SET_CONFIG - PAL-N belongs with PAL-BG as does PAL-H. PAL-Nc belongs to PAL-M - Add SECAM-BGH - Set video freq to cVideoIF_38_90 for DK standards. - Add cTunerGainLow to radio, change deemphasis to 75 for mono. - Add ntsc module param for 'M' and 'J' (Japanese) standards. - Fix module handling for 2.4. - Now able to select all standards through pal/secam/ntsc module options Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3115): Add missing VIDEO_ADV_DEBUG config option.Hans Verkuil
- Add missing VIDEO_ADV_DEBUG config option. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3112): Several fixes for Hauppauge Roselyn Design (blackbird)Steven Toth
- This patch adds eeprom awareness for the Roslyn. In effect, the blackbird will query the tuner V4L2_STD_xxxx definitions to determine whether it's connected to a NTSC or PAL tuner. Based on that, various default values will change for blackbird encoding. - Fixes back panel SVIDEO/COMPOSITE with audio, work properly. - Fixes a problem with lip sync issues, due to bad framerate vs audio rate assumptions. - Fixed a problem with the GPIO configuration in cx88-cards. - Removed the comments in cx88-cards that made no sense. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3110): Replace all uses of pci_module_init with pci_register_driverOtavio Salvador
This patch replace all calls to pci_module_init, that's deprecated and will be removed in future, with pci_register_driver that should be the used function now. Signed-off-by: Otavio Salvador <otavio@debian.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-09V4L/DVB (3108): tveeprom cleanup of hardcoded tuner format values.Steven Toth
- Cleaned up the structure to use the V4L2_STD_xxx definitions rather than a one off set of hardcoded values - which could change in the future. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 04:05:47 +0000