aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-12i2c-savage4: Delete many unused definesJean Delvare
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c/tsl2550: Speed up initializationJean Delvare
There's some redundancy in the tsl2550 initialization sequence. It is powering up the device twice, and setting the operating mode twice too. Setting things just once saves SMBus transactions, which aren't always cheap, speeding up the device initialization. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Rodolfo Giometti <giometti@linux.it>
2007-07-12i2c: New bus driver for the TAOS evaluation modulesJean Delvare
This is a new I2C bus driver for the TAOS evaluation modules. Developped and tested on the TAOS TSL2550 EVM. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-i801: Use the internal 32-byte buffer on ICH4+Oleg Ryjkov
Add an ability to utilize the internal SRAM buffer on ICH4 and newer host controllers to speed up execution of block operations. I've split the code so that it is more clear which block transaction is performed. First of all the host controller's type is identified. isich4 is set when we think that the controller has the internal buffer. Then, before every block transaction, if isich4 is set, we attempt to enable the E32B bit in SMBAUXCTL register. Signed-off-by: Oleg Ryjkov <olegr@google.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-i801: Various cleanupsOleg Ryjkov
* Use defines instead of raw numbers for register bits * Fix several wrong indentations and trailing whitespace * Move hwpec timeout checking to a separate function Signed-off-by: Oleg Ryjkov <olegr@google.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: Add support for the TSL2550Rodolfo Giometti
Add support for Taos TSL2550 ambient light sensors. (http://www.taosinc.com/product_detail.asp?cateid=4&proid=18). Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-pxa: Support new-style I2C driversRodolfo Giometti
Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-gpio: Make some internal functions staticAtsushi Nemoto
i2c_gpio_getsda() and i2c_gpio_getscl() are only used in this file. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-gpio: Add support for new-style clientsAtsushi Nemoto
Use i2c_bit_add_numbered_bus() so that the i2c-gpio adapter works well with new-style pre-declared devices. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-iop3xx: Switch to static adapter numberingMartin Michlmayr
Update the IOP3xx I2C driver to use i2c_add_numbered_adapter(), so that later patches can convert boards to using new-style drivers. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Tested-by: Voipio Riku <Riku.Voipio@movial.fi> Cc: Dan J Williams <dan.j.williams@intel.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-sis5595: Resolve resource conflict with sis5595Jean Delvare
Let the i2c-sis5595 driver release its PCI device after registering. This is to allow the sis5595 hardware monitoring driver to also access this PCI device. The same trick is already used in the i2c-viapro and via686a drivers to let them both load. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12matroxfb: Clean-up i2c header inclusionsJean Delvare
matroxfb_crtc2 has nothing to do with i2c, so there's no reason why matroxfb_crtc2.h should include i2c header files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz>
2007-07-12i2c-nforce2: Add support for SMBus block transactionsOleg Ryjkov
Add support for SMBus block read/write transactions to i2c-nforce2 driver, in particular to host controllers MCP51 and MCP55. Signed-off-by: Oleg Ryjkov <olegr@google.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-mpc: Use i2c_add_numbered_adapterGrant Likely
Move the i2c-mpc driver over to using the new i2c infrastructure. Specifically, it now uses i2c_add_numbered_adapter so that the bus number can be determined ahead of time and used to register i2c clients before the bus is instantiated. Tested on an MPC5200 based board Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-mv64xxx: Use i2c_add_numbered_adapterDale Farnsworth
Convert the Marvell mv64xxx I2C driver to use the new i2c infrastructure, by calling i2c_add_numbered_adapter(). This allows clients to be registered before the bus is instantiated. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c-piix4: Add support for the ATI SB700Henry Su
Add the SMBus device ID for ATI SB700. Signed-off-by: Henry Su <Henry.su@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: New DS1682 chip driverGrant Likely
A driver for the Dallas DS1682 elapsed time recorder chip. Tested on a MPC5200 based board using the integrated i2c adapter. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: Fix the i2c_smbus_read_i2c_block_data() prototypeJean Delvare
Let the drivers specify how many bytes they want to read with i2c_smbus_read_i2c_block_data(). So far, the block count was hard-coded to I2C_SMBUS_BLOCK_MAX (32), which did not make much sense. Many driver authors complained about this before, and I believe it's about time to fix it. Right now, authors have to do technically stupid things, such as individual byte reads or full-fledged I2C messaging, to work around the problem. We do not want to encourage that. I even found that some bus drivers (e.g. i2c-amd8111) already implemented I2C block read the "right" way, that is, they didn't follow the old, broken standard. The fact that it was never noticed before just shows how little i2c_smbus_read_i2c_block_data() was used, which isn't that surprising given how broken its prototype was so far. There are some obvious compatiblity considerations: * This changes the i2c_smbus_read_i2c_block_data() prototype. Users outside the kernel tree will notice at compilation time, and will have to update their code. * User-space has access to i2c_smbus_xfer() directly using i2c-dev, so the changed expectations would affect tools such as i2cdump. In order to preserve binary compatibility, we give I2C_SMBUS_I2C_BLOCK_DATA a new numeric value, and define I2C_SMBUS_I2C_BLOCK_BROKEN with the old numeric value. When i2c-dev receives a transaction with the old value, it can convert it to the new format on the fly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: Deprecate legacy RTC driversJean Delvare
We have a new RTC subsystem with better drivers. Legacy driver status: * ds1337: The DS1337 and DS1339 are now supported by the rtc-ds1307 driver, so it looks to me like we could even delete the ds1337 driver right away. * ds1374: Will soon be replaced with Scott Wood's rtc-ds1374 driver. * m41t00: The M41T00 is supported by the rtc-ds1307 driver. For the M41T81 and M41T85, the rtc-m41t80 driver written by Atsushi Nemoto should work. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Mark A. Greer <mgreer@mvista.com> Acked-by: James Chapman <jchapman@katalix.com> Cc: Randy Vinson <rvinson@mvista.com>
2007-07-12i2c: Delete outdated x1205 driver documentationJean Delvare
The x1205 driver moved to the RTC subsystem and was significantly modified since then, so just delete the outdated documentation. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
2007-07-12scx200_acb: Use mutex instead of semaphoreMatthias Kaehlcke
The scx200_acb driver use a semaphore as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: Fix sparse warning in i2c.hMark M. Hoffman
Kill a sparse warning by un-nesting two container_of() calls. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-12i2c: Add kernel documentationDavid Brownell
Generate I2C kerneldoc; fix various glitches and add "context" sections to that documentation. Most I2C and SMBus functions still have no kerneldoc. Let me suggest providing kerneldoc for all the i2c_smbus_*() functions as a small and mostly self-contained project for anyone so inclined. :) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-10lots-of-architectures: enable arbitary speed tty supportAlan Cox
Add the termios2 structure ready for enabling on most platforms. One or two like Sparc are plain weird so have been left alone. Most can use the same structure as ktermios for termios2 (ie the newer ioctl uses the structure matching the current kernel structure) Signed-off-by: Alan Cox <alan@redhat.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Ian Molton <spyro@f2s.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10Make common helpers for seq_files that work with list_headsPavel Emelianov
Many places in kernel use seq_file API to iterate over a regular list_head. The code for such iteration is identical in all the places, so it's worth introducing a common helpers. This makes code about 300 lines smaller: The first version of this patch made the helper functions static inline in the seq_file.h header. This patch moves them to the fs/seq_file.c as Andrew proposed. The vmlinux .text section sizes are as follows: 2.6.22-rc1-mm1: 0x001794d5 with the previous version: 0x00179505 with this patch: 0x00179135 The config file used was make allnoconfig with the "y" inclusion of all the possible options to make the files modified by the patch compile plus drivers I have on the test node. This patch: Many places in kernel use seq_file API to iterate over a regular list_head. The code for such iteration is identical in all the places, so it's worth introducing a common helpers. Signed-off-by: Pavel Emelianov <xemul@openvz.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10sx: switch subven and subid valuesJiri Slaby
sx.c is failing to locate Graham's card. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Graham Murray <gmurray@webwayone.co.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10Add LZO1X algorithm to the kernelRichard Purdie
This is a hybrid version of the patch to add the LZO1X compression algorithm to the kernel. Nitin and myself have merged the best parts of the various patches to form this version which we're both happy with (and are jointly signing off). The performance of this version is equivalent to the original minilzo code it was based on. Bytecode comparisons have also been made on ARM, i386 and x86_64 with favourable results. There are several users of LZO lined up including jffs2, crypto and reiser4 since its much faster than zlib. Signed-off-by: Nitin Gupta <nitingupta910@gmail.com> Signed-off-by: Richard Purdie <rpurdie@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: at91_mci: fix hanging and rework to match flowcharts mmc: at91_mci typo sdhci: Fix "Unexpected interrupt" handling mmc: fix silly copy-and-paste error mmc: move layer init and workqueue to core file mmc: refactor host class handling mmc: refactor bus operations sdhci: add ene controller id mmc: bounce requests for simple hosts
2007-07-10Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits) bonding/bond_main.c: make 2 functions static ps3: gigabit ethernet driver for PS3, take3 [netdrvr] Fix dependencies for ax88796 ne2k clone driver eHEA: Capability flag for DLPAR support Remove sk98lin ethernet driver. sunhme.c:quattro_pci_find() must be __devinit bonding / ipv6: no addrconf for slaves separately from master atl1: remove write-only var in tx handler macmace: use "unsigned long flags;" Cleanup usbnet_probe() return value handling netxen: deinline and sparse fix eeprom_93cx6: shorten pulse timing to match spec (bis) phylib: Add Marvell 88E1112 phy id phylib: cleanup marvell.c a bit AX88796 network driver IOC3: Switch to pci refcounting safe APIs e100: Fix Tyan motherboard e100 not receiving IPMI commands QE Ethernet driver writes to wrong register to mask interrupts rrunner.c:rr_init() must be __devinit tokenring/3c359.c:xl_init() must be __devinit ...
2007-07-10Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (32 commits) [libata] sata_mv: print out additional chip info during probe [libata] Use ATA_UDMAx standard masks when filling driver's udma_mask info [libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145) [libata] Clean up driver udma_mask initializers libata: Support chips with 64K PRD quirk Add a PCI ID for santa rosa's PATA controller. sata_sil24: sil24_interrupt() micro-optimisation Add irq_flags to struct pata_platform_info sata_promise: cleanups [libata] pata_ixp4xx: kill unused var ata_piix: fix pio/mwdma programming [libata] ahci: minor internal cleanups [ATA] Add named constant for ATAPI command DEVICE RESET [libata] sata_sx4, sata_via: minor documentation updates [libata] ahci: minor internal cleanups [libata] ahci: Factor out SATA port init into a separate function [libata] pata_sil680: minor cleanups from benh [libata] sata_sx4: named constant cleanup [libata] pata_ixp4xx: convert to new EH [libata] pdc_adma: Reorder initializers with a couple structs ...
2007-07-10Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (62 commits) [MIPS] PNX8550: Cleanup proc code. [MIPS] WRPPMC: Fix build. [MIPS] Yosemite: Fix modpost warnings. [MIPS] Change names of local variables to silence sparse [MIPS] SB1: Fix modpost warning. [MIPS] PNX: Fix modpost warnings. [MIPS] Alchemy: Fix modpost warnings. [MIPS] Non-FPAFF: Fix warning. [MIPS] DEC: Fix modpost warning. [MIPS] MIPSsim: Enable MIPSsim virtual network driver. [MIPS] Delete Ocelot 3 support. [MIPS] remove LASAT Networks platforms support [MIPS] Early check for SMTC kernel on non-MT processor [MIPS] Add debugfs files to show fpuemu statistics [MIPS] Add some debugfs files to debug unaligned accesses [MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs [MIPS] tc35815: Load MAC address via platform_device [MIPS] Move FPU affinity code into separate file. [MIPS] Make ioremap() work on TX39/49 special unmapped segment [MIPS] rbtx4938: Update and minimize defconfig ...
2007-07-10Merge git://git.infradead.org/~dwmw2/battery-2.6Linus Torvalds
* git://git.infradead.org/~dwmw2/battery-2.6: [BATTERY] ds2760 W1 slave [BATTERY] One Laptop Per Child power/battery driver [BATTERY] Apple PMU driver [BATTERY] 1-Wire ds2760 chip battery driver [BATTERY] APM emulation driver for class batteries [BATTERY] pda_power platform driver [BATTERY] Universal power supply class (was: battery class)
2007-07-10Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] vmlogrdr function annotation. [S390] s390: rename CPU_IDLE to S390_CPU_IDLE [S390] cio: Remove prototype for non-existing function cmf_reset(). [S390] zcrypt: fix request timeout handling [S390] system call optimization. [S390] dasd: Avoid compile warnings on !CONFIG_DASD_PROFILE [S390] Remove volatile from atomic_t [S390] Program check in diag 210 under 31 bit [S390] Bogomips calculation for 64 bit. [S390] smp: Merge smp_count_cpus() and smp_get_save_areas(). [S390] zcore: Fix __user annotation. [S390] fixed cdl-format detection. [S390] sclp: Test facility list before executing a service call. [S390] sclp: introduce some new interfaces. [S390] Fixed comment typo. [S390] vmcp cleanup
2007-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits) [GFS2] Accept old format NFS filehandles [GFS2] Small fixes to logging code [DLM] dump more lock values [GFS2] Remove i_mode passing from NFS File Handle [GFS2] Obtaining no_formal_ino from directory entry [GFS2] git-gfs2-nmw-build-fix [GFS2] System won't suspend with GFS2 file system mounted [GFS2] remounting w/o acl option leaves acls enabled [GFS2] inode size inconsistency [DLM] Telnet to port 21064 can stop all lockspaces [GFS2] Fix gfs2_block_truncate_page err return [GFS2] Addendum to the journaled file/unmount patch [GFS2] Simplify multiple glock aquisition [GFS2] assertion failure after writing to journaled file, umount [GFS2] Use zero_user_page() in stuffed_readpage() [GFS2] Remove bogus '\0' in rgrp.c [GFS2] Journaled file write/unstuff bug [DLM] don't require FS flag on all nodes [GFS2] Fix deallocation issues [GFS2] return conflicts for GETLK ...
2007-07-10Merge branch 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block: pipe: add documentation and comments pipe: change the ->pin() operation to ->confirm() Remove remnants of sendfile() xip sendfile removal splice: completely document external interface with kerneldoc sendfile: remove bad_sendfile() from bad_file_ops shmem: convert to using splice instead of sendfile() relay: use splice_to_pipe() instead of open-coding the pipe loop pipe: allow passing around of ops private pointer splice: divorce the splice structure/function definitions from the pipe header splice: relay support sendfile: convert nfsd to splice_direct_to_actor() sendfile: convert nfs to using splice_read() loop: convert to using splice_direct_to_actor() instead of sendfile() splice: add void cookie to the actor data sendfile: kill generic_file_sendfile() sendfile: remove .sendfile from filesystems that use generic_file_sendfile() sys_sendfile: switch to using ->splice_read, if available vmsplice: add vmsplice-to-user support splice: abstract out actor data
2007-07-10Merge branch 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block: Documentation/block/barrier.txt is not in sync with the actual code: - blk_queue_ordered() no longer has a gfp_mask parameter - blk_queue_ordered_locked() no longer exists - sd_prepare_flush() looks slightly different Use list_for_each_entry() instead of list_for_each() in the block device Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", block/Kconfig already has its own "menuconfig" so remove these Use menuconfigs instead of menus, so the whole menu can be disabled at once cfq-iosched: fix async queue behaviour unexport bio_{,un}map_user Remove legacy CDROM drivers [PATCH] fix request->cmd == INT cases cciss: add new controller support for P700m [PATCH] Remove acsi.c [BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endio [PATCH] cdrom_sysctl_info fix blk_hw_contig_segment(): bad segment size checks [TRIVIAL PATCH] Kill blk_congestion_wait() stub for !CONFIG_BLOCK
2007-07-10bonding/bond_main.c: make 2 functions staticAdrian Bunk
Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Chad Tindel <ctindel@users.sourceforge.net> Cc: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10ps3: gigabit ethernet driver for PS3, take3Masakazu Mokuno
Hi, This is the third submission of the network driver for PS3. The differences from the previous one are: - renamed source file names so that their prefix can match with the module name - added cbe-oss-dev@ozlabs.org line for MAINTAINER file - changed some in copyright comments If there are no more comments, please apply for 2.6.23. Thank you -- Subject: PS3: Ethernet driver From: Masakazu Mokuno <mokuno@sm.sony.co.jp> Add Gigabit Ethernet support for the PS3 game console. The module will be called ps3_gelic. CC: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10[netdrvr] Fix dependencies for ax88796 ne2k clone driverJeff Garzik
It needs writesb(), not available on all platforms. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10eHEA: Capability flag for DLPAR supportJan-Bernd Themann
This patch introduces a capability flag that is used by the DLPAR userspace tool to check which DLPAR features are supported by the eHEA driver. Missing goto has been included. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Remove sk98lin ethernet driver.Jeff Garzik
Unmaintained, superceded by skge. Prodded to deletion by Adrian Bunk. Acked by Stephen Hemminger. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10sunhme.c:quattro_pci_find() must be __devinitAdrian Bunk
This patch fixes the following section mismatch: <-- snip --> ... MODPOST vmlinux WARNING: drivers/built-in.o(.text+0x272f8b): Section mismatch: reference to .init.text:quattro_pci_find (between 'happy_meal_pci_probe' and 'happy_meal_pci_remove') ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10bonding / ipv6: no addrconf for slaves separately from masterJay Vosburgh
At present, when a device is enslaved to bonding, if ipv6 is active then addrconf will be initated on the slave (because it is closed then opened during the enslavement processing). This causes DAD and RS packets to be sent from the slave. These packets in turn can confuse switches that perform ipv6 snooping, causing them to incorrectly update their forwarding tables (if, e.g., the slave being added is an inactve backup that won't be used right away) and direct traffic away from the active slave to a backup slave (where the incoming packets will be dropped). This patch alters the behavior so that addrconf will only run on the master device itself. I believe this is logically correct, as it prevents slaves from having an IPv6 identity independent from the master. This is consistent with the IPv4 behavior for bonding. This is accomplished by (a) having bonding set IFF_SLAVE sooner in the enslavement processing than currently occurs (before open, not after), and (b) having ipv6 addrconf ignore UP and CHANGE events on slave devices. The eql driver also uses the IFF_SLAVE flag. I inspected eql, and I believe this change is reasonable for its usage of IFF_SLAVE, but I did not test it. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10atl1: remove write-only var in tx handlerAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10macmace: use "unsigned long flags;"Alexey Dobriyan
Code will do local_irq_save() on it. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10Cleanup usbnet_probe() return value handlingPeter Korsgaard
usbnet_probe() handles a positive return value from the driver bind() function as success, but will later only setup the status handler if the return value was zero, leading to confusion. Patch adjusts this to accept positive values as success in both checks. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10netxen: deinline and sparse fixStephen Hemminger
Get rid of dubious casts to (void *) which causes a sparse warning. And move largeish function from inline to the one file that uses the code, the compiler can then decide to inline it. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10eeprom_93cx6: shorten pulse timing to match spec (bis)Francois Romieu
Based on an original idea by John W. Linville. It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10phylib: Add Marvell 88E1112 phy idOlof Johansson
Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the 88E1111 inits. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-10phylib: cleanup marvell.c a bitOlof Johansson
Simplify the marvell driver init a bit: Make the supported devices an array instead of explicitly registering each structure. This makes it considerably easier to add new devices down the road. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 00:23:06 +0000