aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-18x86 PAT: fix mmap() of holesIngo Molnar
do not return a -EINVAL when mmap()-ing PCI holes. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arjan van de Ven <arjan@linux.intel.com>
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (137 commits) [SCSI] iscsi: bidi support for iscsi_tcp [SCSI] iscsi: bidi support at the generic libiscsi level [SCSI] iscsi: extended cdb support [SCSI] zfcp: Fix error handling for blocked unit for send FCP command [SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlock [SCSI] zfcp: fix 31 bit compile warnings [SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commands [SCSI] bsg: remove minor in struct bsg_device [SCSI] bsg: use better helper list functions [SCSI] bsg: replace kobject_get with blk_get_queue [SCSI] bsg: takes a ref to struct device in fops->open [SCSI] qla1280: remove version check [SCSI] libsas: fix endianness bug in sas_ata [SCSI] zfcp: fix compiler warning caused by poking inside new semaphore (linux-next) [SCSI] aacraid: Do not describe check_reset parameter with its value [SCSI] aacraid: Fix down_interruptible() to check the return value [SCSI] sun3_scsi_vme: add MODULE_LICENSE [SCSI] st: rename flush_write_buffer() [SCSI] tgt: use KMEM_CACHE macro [SCSI] initio: fix big endian problems for auto request sense ...
2008-04-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (43 commits) firewire: cleanups firewire: fix synchronization of gap counts firewire: wait until PHY configuration packet was transmitted (fix bus reset loop) firewire: remove unused struct member firewire: use bitwise and to get reg in handle_registers firewire: replace more hex values with defined csr constants firewire: reread config ROM when device reset the bus firewire: replace static ROM cache by allocated cache firewire: fw-ohci: work around generation bug in TI controllers (fix AV/C and more) firewire: fw-ohci: extend logging of bus generations and node ID firewire: fw-ohci: conditionally log busReset interrupts firewire: fw-ohci: don't append to AT context when it's not active firewire: fw-ohci: log regAccessFail events firewire: fw-ohci: make sure HCControl register LPS bit is set firewire: fw-ohci: missing PPC PMac feature calls in failure path firewire: fw-ohci: untangle a mixed unsigned/signed expression firewire: debug interrupt events firewire: fw-ohci: catch self_id_count == 0 firewire: fw-ohci: add self ID error check firewire: fw-ohci: refactor probe, remove, suspend, resume ...
2008-04-18libata: fix boot panic with SATAPI devices on non-SFF HBAsJames Bottomley
The kernel now panics reliably on boot if you have a SATAPI device connected. The problem was introduced by the libata merge trying to pull out all the SFF code into a separate module. Unfortunately, if you're a satapi device you usually need to call atapi_request_sense, which has a bare invocation of a SFF callback which is NULL on non-SFF HBAs. Fix this by making the call conditional. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: (64 commits) ocfs2/net: Add debug interface to o2net ocfs2: Only build ocfs2/dlm with the o2cb stack module ocfs2/cluster: Get rid of arguments to the timeout routines ocfs2: Put tree in MAINTAINERS ocfs2: Use BUG_ON ocfs2: Convert ocfs2 over to unlocked_ioctl ocfs2: Improve rename locking fs/ocfs2/aops.c: test for IS_ERR rather than 0 ocfs2: Add inode stealing for ocfs2_reserve_new_inode ocfs2: Add ac_alloc_slot in ocfs2_alloc_context ocfs2: Add a new parameter for ocfs2_reserve_suballoc_bits ocfs2: Enable cross extent block merge. ocfs2: Add support for cross extent block ocfs2: Move /sys/o2cb to /sys/fs/o2cb sysfs: Allow removal of symlinks in the sysfs root ocfs2: Reconnect after idle time out. ocfs2/dlm: Cleanup lockres print ocfs2/dlm: Fix lockname in lockres print function ocfs2/dlm: Move dlm_print_one_mle() from dlmmaster.c to dlmdebug.c ocfs2/dlm: Dumps the purgelist into a debugfs file ...
2008-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (49 commits) [GFS2] fix assertion in log_refund() [GFS2] fix GFP_KERNEL misuses [GFS2] test for IS_ERR rather than 0 [GFS2] Invalidate cache at correct point [GFS2] fs/gfs2/recovery.c: suppress warnings [GFS2] Faster gfs2_bitfit algorithm [GFS2] Streamline quota lock/check for no-quota case [GFS2] Remove drop of module ref where not needed [GFS2] gfs2_adjust_quota has broken unstuffing code [GFS2] possible null pointer dereference fixup [GFS2] Need to ensure that sector_t is 64bits for GFS2 [GFS2] re-support special inode [GFS2] remove gfs2_dev_iops [GFS2] fix file_system_type leak on gfs2meta mount [GFS2] Allow bmap to allocate extents [GFS2] Fix a page lock / glock deadlock [GFS2] proper extern for gfs2/locking/dlm/mount.c:gdlm_ops [GFS2] gfs2/ops_file.c should #include "ops_inode.h" [GFS2] be*_add_cpu conversion [GFS2] Fix bug where we called drop_bh incorrectly ...
2008-04-18x86: kgdb build fixHarvey Harrison
TF_MASK is no longer defined, use X86_EFLAGS_TF. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-18[SCSI] iscsi: bidi support for iscsi_tcpBoaz Harrosh
access the right scsi_in() and/or scsi_out() side of things. also for resid Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Pete Wyckoff <pw@osc.edu> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18[SCSI] iscsi: bidi support at the generic libiscsi levelBoaz Harrosh
- prepare the additional bidi_read rlength header. - access the right scsi_in() and/or scsi_out() side of things. also for resid. - Handle BIDI underflow overflow from target Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Pete Wyckoff <pw@osc.edu> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18[SCSI] iscsi: extended cdb supportBoaz Harrosh
Support for extended CDBs in iscsi. All we need is to check if command spills over 16 bytes then allocate an iscsi-extended-header for the leftovers. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Reviewed-by: Pete Wyckoff <pw@osc.edu> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18[SCSI] zfcp: Fix error handling for blocked unit for send FCP commandChristof Schmitt
In the case the unit is blocked, zfcp_unit_get has not been called yet, so the error handling path should not call zfcp_unit_put. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18[SCSI] zfcp: Remove zfcp_erp_wait from slave destory handler to fix deadlockChristof Schmitt
The testcase # chchp -v 0 0.da && sleep 59 && chchp -v 1 0.da results in this deadlock situation: STACK TRACE FOR TASK: 0x7e9a2048 (zfcperp0.0.c613) 0 schedule+816 [0x356b3c] 1 schedule_timeout+172 [0x357340] 2 wait_for_common+192 [0x3565fc] 3 flush_cpu_workqueue+116 [0x52af0] 4 flush_workqueue+116 [0x533b8] 5 fc_remote_port_add+64 [0x1c83ec] 6 zfcp_erp_thread+4534 [0x26585a] 7 kernel_thread_starter+6 [0x195d2] STACK TRACE FOR TASK: 0x7f8ec048 (fc_wq_0) 0 schedule+816 [0x356b3c] 1 zfcp_erp_wait+104 [0x264568] 2 zfcp_scsi_slave_destroy+64 [0x261b24] 3 __scsi_remove_device+154 [0x1c24ba] 4 scsi_remove_device+62 [0x1c2512] 5 __scsi_remove_target+198 [0x1c25ea] 6 __remove_child+58 [0x1c26d6] 7 device_for_each_child+66 [0x1ab566] 8 scsi_remove_target+98 [0x1c268a] 9 run_workqueue+200 [0x5272c] 10 worker_thread+146 [0x52882] 11 kthread+140 [0x58360] 12 kernel_thread_starter+6 [0x195d2] Remove the zfcp_erp_wait call that is not required here to prevent the deadlock situation. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18[SCSI] zfcp: fix 31 bit compile warningsMartin Peschke
drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_fsf_incoming_els_rscn’: drivers/s390/scsi/zfcp_aux.c:1379: warning: cast from pointer to integer of different size drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_fsf_incoming_els_plogi’: drivers/s390/scsi/zfcp_aux.c:1432: warning: cast from pointer to integer of different size drivers/s390/scsi/zfcp_aux.c: In function ‘zfcp_fsf_incoming_els_logo’: drivers/s390/scsi/zfcp_aux.c:1457: warning: cast from pointer to integer of different size .. Just passing pointers rids us of these warnings and improves readability. Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18[SCSI] bsg: no need to set BSG_F_BLOCK bit in bsg_complete_all_commandsFUJITA Tomonori
Before bsg_complete_all_commands is called, BSG_F_BLOCK bit is always set. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18[SCSI] bsg: remove minor in struct bsg_deviceFUJITA Tomonori
minor in struct bsg_device is used as identifier to find the corresponding struct bsg_device_class. However, request_queuse can be used as identifier for that and the minor in struct bsg_device is unnecessary. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18[SCSI] bsg: use better helper list functionsFUJITA Tomonori
This replace hlist_for_each and list_entry with hlist_for_each_entry and list_first_entry respectively. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18[SCSI] bsg: replace kobject_get with blk_get_queueFUJITA Tomonori
Both takes a ref to a queue. But blk_get_queue checks QUEUE_FLAG_DEAD and is more appropriate interface here. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18[SCSI] bsg: takes a ref to struct device in fops->openFUJITA Tomonori
bsg_register_queue() takes a ref to struct device that a caller passes. For example, bsg takes a ref to the sdev_gendev for scsi devices. However, bsg doesn't inrease the refcount in fops->open. So while an application opens a bsg device, the scsi device that the bsg device holds can go away (bsg also takes a ref to a queue, but it doesn't prevent the device from going away). With this patch, bsg increases the refcount of struct device in fops->open and decreases it in fops->release. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-18Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits) [IA64] kdump: Add crash_save_vmcoreinfo for INIT [IA64] Fix NUMA configuration issue [IA64] Itanium Spec updates [IA64] Untangle sync_icache_dcache() page size determination [IA64] arch/ia64/kernel/: use time_* macros [IA64] remove redundant display of free swap space in show_mem() [IA64] make IOMMU respect the segment boundary limits [IA64] kprobes: kprobe-booster for ia64 [IA64] fix getpid and set_tid_address fast system calls for pid namespaces [IA64] Replace explicit jiffies tests with time_* macros. [IA64] use goto to jump out do/while_each_thread [IA64] Fix unlock ordering in smp_callin [IA64] pgd_offset() constfication. [IA64] kdump: crash.c coding style fix [IA64] kdump: add kdump_on_fatal_mca [IA64] Minimize per_cpu reservations. [IA64] Correct pernodesize calculation. [IA64] Kernel parameter for max number of concurrent global TLB purges [IA64] Multiple outstanding ptc.g instruction support [IA64] Implement smp_call_function_mask for ia64 ...
2008-04-18ocfs2/net: Add debug interface to o2netSunil Mushran
This patch exposes o2net information via debugfs. The information includes the list of sockets (sock_containers) as well as the list of outstanding messages (send_tracking). Useful for o2dlm debugging. (This patch is derived from an earlier one written by Zach Brown that exposed the same information via /proc.) [Mark: checkpatch fixes] Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Reviewed-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Only build ocfs2/dlm with the o2cb stack moduleMark Fasheh
fs/ocfs2/dlm/ocfs2_dlm.ko and fs/ocfs2/dlm/ocfs2_dlmfs.ko get built if CONFIG_FS_OCFS2 is specified. This isn't quite how it should happen any more - the "o2cb" dlm modules should only be built if CONFIG_FS_OCFS2_O2CB is set, so update the dlm Makefile accordingly. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Joel Becker <joel.becker@oracle.com>
2008-04-18ocfs2/cluster: Get rid of arguments to the timeout routinesJeff Mahoney
We keep seeing bug reports related to NULL pointer derefs in o2net_set_nn_state(). When I originally wrote up the configurable timeout patch, I had tried to plan for multiple clusters. This was silly. The timeout routines all use o2nm_single_cluster so there's no point in passing an argument at all. This patch removes the arguments and kills those bugs dead. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Put tree in MAINTAINERSJoel Becker
The ocfs2 MAINTAINERS entry should have the git tree URL. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Use BUG_ONJulia Lawall
if (...) BUG(); should be replaced with BUG_ON(...) when the test has no side-effects to allow a definition of BUG_ON that drops the code completely. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ disable unlikely @ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (unlikely(E)) { BUG(); } + BUG_ON(E); ) @@ expression E,f; @@ ( if (<... f(...) ...>) { BUG(); } | - if (E) { BUG(); } + BUG_ON(E); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Convert ocfs2 over to unlocked_ioctlAndi Kleen
As far as I can see there is nothing in ocfs2_ioctl that requires the BKL, so use unlocked_ioctl Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Improve rename lockingJan Kara
ocfs2_rename() was being too aggressive with the rename lock - we only need it for certain forms of directory rename. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18fs/ocfs2/aops.c: test for IS_ERR rather than 0Julia Lawall
The function ocfs2_start_trans always returns either a valid pointer or a value made with ERR_PTR, so its result should be tested with IS_ERR, not with a test for 0. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add inode stealing for ocfs2_reserve_new_inodeTao Ma
Inode allocation is modified to look in other nodes allocators during extreme out of space situations. We retry our own slot when space is freed back to the global bitmap, or whenever we've allocated more than 1024 inodes from another slot. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add ac_alloc_slot in ocfs2_alloc_contextTao Ma
In inode stealing, we no longer restrict the allocation to happen in the local node. So it is neccessary for us to add a new member in ocfs2_alloc_context to indicate which slot we are using for allocation. We also modify the process of local alloc so that this member can be used there also. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add a new parameter for ocfs2_reserve_suballoc_bitsTao Ma
In some cases(Inode stealing from other nodes), we may not want ocfs2_reserve_suballoc_bits to allocate new groups from the global_bitmap since it may already be full. So add a new parameter for this. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Enable cross extent block merge.Tao Ma
In ocfs2_figure_merge_contig_type, we judge whether there exists a cross extent block merge and enable it by setting CONTIG_LEFT and CONTIG_RIGHT accordingly. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add support for cross extent blockTao Ma
In ocfs2_merge_rec_left, when we find the merge extent is "CONTIG_RIGHT" with the first extent record of the next extent block, we will merge it to the next extent block and change all the related extent blocks accordingly. In ocfs2_merge_rec_right, when we find the merge extent is "CONTIG_LEFT" with the last extent record of the previous extent block, we will merge it to the prevoius extent block and change all the related extent blocks accordingly. As for CONTIG_LEFTRIGHT, we will handle CONTIG_RIGHT first so that when the index is zero, the merge process will be more efficient and easier. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Move /sys/o2cb to /sys/fs/o2cbMark Fasheh
/sys/fs is where we really want file system specific sysfs objects. Ocfs2-tools has been updated to look in /sys/fs/o2cb. We can maintain backwards compatibility with old ocfs2-tools by using a sysfs symlink. After some time (2 years), the symlink can be safely removed. This patch also adds documentation to make it easier for people to figure out what /sys/fs/o2cb is used for. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18sysfs: Allow removal of symlinks in the sysfs rootMark Fasheh
Allow callers of sysfs_remove_link() to pass a NULL kobj, in which case sysfs_root will be used as the parent directory. This allows us to tear down top level symlinks created via sysfs_create_link(), which already has similar handling of a NULL parent object. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-18ocfs2: Reconnect after idle time out.Tao Ma
Currently, o2net connects to a node on hb_up and disconnects on hb_down and net timeout. It disconnects on net timeout is ok, but it should attempt to reconnect back. This is because sometimes nodes get overloaded enough that the network connection breaks but the disk hb does not. And if we get into that situation, we either fence (unnecessarily) or wait for its disk hb to die (and sometimes hang in the process). So in this updated scheme, when the network disconnects, we keep attempting to reconnect till we succeed or we get a disk hb down event. If the other node is really dead, then we will eventually get a node down event. If not, we should be able to connect again and continue. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Cleanup lockres printSunil Mushran
A previous patch added KERN_NOTICE to printks printing the lockres that cluttered the output. This patch removes the log level. For people concerned with syslog clutter, please note we now use this facility to print lockres only during an error. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Fix lockname in lockres print functionSunil Mushran
__dlm_print_one_lock_resource was printing lockname incorrectly. Also, we now use printk directly instead of mlog as the latter prints the line context which is not useful for this print. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Move dlm_print_one_mle() from dlmmaster.c to dlmdebug.cSunil Mushran
This patch helps in consolidating debugging related functions in dlmdebug.c. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Dumps the purgelist into a debugfs fileSunil Mushran
This patch dumps all the lockres' on the purgelist it can fit in one page into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Dumps the mles into a debugfs fileSunil Mushran
This patch dumps all mles it can fit in one page into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Move struct dlm_master_list_entry to dlmcommon.hSunil Mushran
This patch moves some mle related definitions from dlmmaster.c to dlmcommon.h. Future patches need these definitions to dump mle debugging information. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.beckeroracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Dumps the lockres' into a debugfs fileSunil Mushran
This patch dumps all the lockres' alongwith all the locks into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Dump the dlm state in a debugfs fileSunil Mushran
This patch dumps the dlm state (dlm_ctxt) into a debugfs file. Useful for debugging. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Create debugfs dirsSunil Mushran
This patch creates the debugfs directories that will hold the files to be used to dump the dlm state. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Link all lockres' to a tracking listSunil Mushran
This patch links all the lockres' to a tracking list in dlm_ctxt. We will use this in an upcoming patch that will walk the entire list and to dump the lockres states to a debugfs file. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Create slabcaches for lock and lockresSunil Mushran
This patch makes the o2dlm allocate memory for lockres, lockname and lock structures from slabcaches rather than kmalloc. This allows us to not only make these allocs more efficient but also allows us to track the memory being consumed by these structures. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2/dlm: Rename slabcache dlm_mle_cache to o2dlm_mleSunil Mushran
This patch renames dlm_mle_slabcache to prevent namespace clashes with fs/dlm. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Document /sys/fs/ocfs2Joel Becker
Add ABI documentation for these files: /sys/fs/ocfs2/max_locking_protocol /sys/fs/ocfs2/loaded_cluster_plugins /sys/fs/ocfs2/active_cluster_plugin /sys/fs/ocfs2/cluster_stack Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Allow selection of cluster plug-ins.Joel Becker
ocfs2 now supports plug-ins for the classic O2CB stack as well as userspace cluster stacks in conjunction with fs/dlm. This allows zero, one, or both of the plug-ins to be selected in Kconfig. For local mounts (non-clustered), neither plug-in is needed. Both plugins can be loaded at one time, the runtime will select the one needed for the cluster systme in use. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-04-18ocfs2: Add kbuild for ocfs2_stack_user.koJoel Becker
Add ocfs2_stack_user.ko to the Makefile so that it builds. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 16:07:05 +0000