aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-06-12sysfs: store sysfs inode nrs in s_ino to avoid readdir oopsesEric Sandeen
Backport of ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc1/2.6.22-rc1-mm1/broken-out/gregkh-driver-sysfs-allocate-inode-number-using-ida.patch For regular files in sysfs, sysfs_readdir wants to traverse sysfs_dirent->s_dentry->d_inode->i_ino to get to the inode number. But, the dentry can be reclaimed under memory pressure, and there is no synchronization with readdir. This patch follows Tejun's scheme of allocating and storing an inode number in the new s_ino member of a sysfs_dirent, when dirents are created, and retrieving it from there for readdir, so that the pointer chain doesn't have to be traversed. Tejun's upstream patch uses a new-ish "ida" allocator which brings along some extra complexity; this -stable patch has a brain-dead incrementing counter which does not guarantee uniqueness, but because sysfs doesn't hash inodes as iunique expects, uniqueness wasn't guaranteed today anyway. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Make sure RQ allocation is always valid RDMA/cma: Fix initialization of next_port IB/mlx4: Fix zeroing of rnr_retry value in ib_modify_qp() mlx4_core: Don't set MTT address in dMPT entries with PA set mlx4_core: Check firmware command interface revision IB/mthca, mlx4_core: Fix typo in comment mlx4_core: Free catastrophic error MSI-X interrupt with correct dev_id mlx4_core: Initialize ctx_list and ctx_lock earlier mlx4_core: Fix CQ context layout
2007-06-11Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix smp barriers in test_and_{change,clear,set}_bit [MIPS] Fix IP27 build [MIPS] Fix modpost warnings by making start_secondary __cpuinit [MIPS] SMTC: Fix build error caused by nonsense code. [MIPS] SMTC: The MT ASE requires to initialize c0_pagemask and c0_wired. [MIPS] SMTC: Don't continue in set_vi_srs_handler on detected bad arguments. [MIPS] SMTC: Fix warning. [MIPS] Wire up utimensat, signalfd, timerfd, eventfd [MIPS] Atlas: Fix build. [MIPS] Always install the DSP exception handler. [MIPS] SMTC: Don't set and restore irqregs ptr from self_ipi. [MIPS] Fix KMODE for the R3000
2007-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] CIFS should honour umask [CIFS] Missing flag on negprot needed for some servers to force packet signing [CIFS] whitespace cleanup part 2 [CIFS] whitespace cleanup [CIFS] fix mempool destroy done in wrong order in cifs error path [CIFS] typo in previous patch [CIFS] Fix oops on failed cifs mount (in kthread_stop)
2007-06-11Merge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgartLinus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] intel_agp: Add support for G33, Q33 and Q35 chipsets [AGPGART] intel_agp: add support for 945GME [AGPGART] intel_agp: add support for 965GME/GLE [AGPGART] intel_agp: use table for device probe [AGPGART] intel_agp: cleanup intel private data
2007-06-11Merge branch 'linus-plus-plus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'linus-plus-plus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: limit post SRST nsect/lbal wait to ~100ms libata: force PIO on IOMEGA ZIP 250 ATAPI libata passthru: update cached device paramters libata passthru: always enforce correct DEV bit libata passthru: map UDMA protocols libata passthru: support PIO multi commands libata passthru: update protocol numbers libata: Correct abuse of language libata-core/sff: Fix multiple assumptions about DMA ahci: Add MCP73/MCP77 support to AHCI driver libata: fix hw_sata_spd_limit initialization libata: print device model and firmware revision for ATAPI devices libata: fix probe time irq printouts libata: disable NCQ for HITACHI HTS541680J9SA00/SB21C7EP remove unused variable in pata_isapnp
2007-06-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (5751): Ivtv: fix ia64 printk format warnings. V4L/DVB (5761): Fix broken b2c2 dependency on non x86 architectures V4L/DVB (5673): Fix audio stuttering for saa711x/ivtv when in radio mode. V4L/DVB (5736): Add V4L2_FBUF_CAP/FLAG_LOCAL/GLOBAL_INV_ALPHA V4L/DVB (5732): Add ivtv CROPCAP support and fix ivtv S_CROP for video output. V4L/DVB (5730): Remove unused V4L2_CAP_VIDEO_OUTPUT_POS V4L/DVB (5720): Usbvision: fix urb allocation and submits V4L/DVB (5716): Tda10086,tda826x: fix tuning, STR/SNR values V4L/DVB (5675): Move big PIO accesses from the interrupt handler to a workhandler V4L/DVB (5699): Cinergyt2: fix file release handler V4L/DVB (5700): Saa7111: fix picture settings cache bug V4L/DVB (5702): Fix Kconfig items to avoid linkedition errors
2007-06-11Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: Add the MCP73/77 support to PATA driver Add the PATA controller device ID to pci_ids.h for MCP73/MCP77. hpt366: disallow Ultra133 for HPT374 ide: generic IDE PCI driver, add another device exception ide: HPA detect from resume it821x: RAID mode fixes serverworks: fix CSB6 tuning logic serverworks: remove crappy code
2007-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: don't call switch on old cards mmc: fix broken if clause au1xmmc: Replace C code with call to ARRAY_SIZE() macro. mmc-atmel: remove linux/mmc/protocol.h dependencies
2007-06-11Merge branch 'splice-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'splice-2.6.22' of git://git.kernel.dk/data/git/linux-2.6-block: splice: __generic_file_splice_read: fix read/truncate race splice: __generic_file_splice_read: fix i_size_read() length checks splice: move balance_dirty_pages_ratelimited() outside of splice actor pipe: move pipe_inode_info structure decleration up before it's used splice: remove do_splice_direct() symbol export splice: move inode size check into generic_file_splice_read()
2007-06-11[MIPS] Fix smp barriers in test_and_{change,clear,set}_bitRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11[MIPS] Fix IP27 buildAtsushi Nemoto
IP27 does no longer have ZONE_DMA. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11[MIPS] Fix modpost warnings by making start_secondary __cpuinitRalf Baechle
WARNING: arch/mips/kernel/built-in.o(.text+0x9a58): Section mismatch: reference to .init.text:cpu_report (between 'start_secondary' and 'smp_prepare_boot_cpu') WARNING: arch/mips/kernel/built-in.o(.text+0x9a60): Section mismatch: reference to .init.text:per_cpu_trap_init (between 'start_secondary' and 'smp_prepare_boot_cpu') WARNING: arch/mips/kernel/built-in.o(.text+0x9adc): Section mismatch: reference to .init.text:cpu_probe (between 'start_secondary' and 'smp_prepare_boot_cpu') mipsel-linux-objcopy -S -O srec --remove-section=.reginfo --remove-section=.mdebug --remove-section=.comment --remove-section=.note --remove-section=.pdr --remove-section=.options --remove-section=.MIPS.options vmlinux arch/mips/boot/vmlinux.srec Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11[MIPS] SMTC: Fix build error caused by nonsense code.Chris Dearman
Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11[MIPS] SMTC: The MT ASE requires to initialize c0_pagemask and c0_wired.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11[MIPS] SMTC: Don't continue in set_vi_srs_handler on detected bad arguments.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11[MIPS] SMTC: Fix warning.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11[MIPS] Wire up utimensat, signalfd, timerfd, eventfdAtsushi Nemoto
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11[MIPS] Atlas: Fix build.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11[MIPS] Always install the DSP exception handler.Chris Dearman
Some non-DSP enabled cores 24K / 34K can generate a DSP exception where they are actually expected to produce a reserved instruction exception. Signed-off-by: Chris Dearman <chris@mips.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11[MIPS] SMTC: Don't set and restore irqregs ptr from self_ipi.Ralf Baechle
This did corrupt register s0 which the caller of self_ipi expects to be unchanged. This is a kernel bug which will only be triggered with the compilers which compile __smtc_ipi_replay to use s0 across the invocation of self_ipi. Gcc 4.1.2 does this, for example. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11[MIPS] Fix KMODE for the R3000Maciej W. Rozycki
This must be the oldest bug that we have got. Leaving interrupts "as they are" for the R3000 obviously means copying IEp to IEc. Since we have got STATMASK now, I took this opportunity to mask the status register "correctly" for the R3000 now too. Oh, and the R3000 hardly ever is 64-bit. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-06-11libata: limit post SRST nsect/lbal wait to ~100msTejun Heo
After SRST, libata used to wait for nsect/lbal to be set to 1/1 for the slave device. However, some ATAPI devices don't set nsect/lbal after SRST and the wait itself isn't too useful as we're gonna wait for !BSY right after that anyway. Before reset-seq update, nsect/lbal wait failure used to be ignored and caused 30sec delay during detection. After reset-seq, all timeouts are considered error conditions making libata fail to detect such ATAPI devices. This patch limits nsect/lbal wait to around 100ms. This should give acceptable behavior to such ATAPI devices while not disturbing the heavily used code path too much. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-11libata: force PIO on IOMEGA ZIP 250 ATAPITejun Heo
IOMEGA ZIP 250 ATAPI claims MWDMA0 support but fails SETXFERMODE if asked to configure itself to MWDMA0. Force PIO. This fixes bugzilla bug#8497. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Calvin Walton <calvin.walton@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata passthru: update cached device paramtersAlbert Lee
INIT_DEV_PARAMS and SET_MULTI_MODE change the device parameters cached by libata. Re-read IDENTIFY DEVICE info and update the cached device paramters when seeing these commands. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata passthru: always enforce correct DEV bitAlbert Lee
Always enforce correct DEV bit since we know which drive the command is targeted. SAT demands to ignore the DEV bit, too. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata passthru: map UDMA protocolsAlbert Lee
Map the ATA passthru UDMA protocols to ATA_PROT_DMA. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata passthru: support PIO multi commandsAlbert Lee
support the pass through of PIO multi commands. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata passthru: update protocol numbersAlbert Lee
Update the ATA passthru protocol numbers according to the new spec. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata: Correct abuse of languageAlan Cox
The controller is not reporting an unlawful type, it is reporting an invalid type. Illegal specifically means "prohibited by law" Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata-core/sff: Fix multiple assumptions about DMAAlan Cox
The ata IRQ ack functions are only used when debugging. Unfortunately almost every controller that calls them can cause crashes in some configurations as there are missing checks for bmdma presence. In addition ata_port_start insists of installing DMA buffers and pad buffers for controllers regardless. The SFF controllers actually need to make that decision dynamically at controller setup time and all need the same helper - so we add ata_sff_port_start. Future patches will switch the SFF drivers to use this. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09ahci: Add MCP73/MCP77 support to AHCI driverPeer Chen
Add the MCP73/MCP77 support to ahci driver. Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata: fix hw_sata_spd_limit initializationTejun Heo
hw_sata_spd_limit used to be incorrectly initialized to zero instead of UINT_MAX if SPD is zero in SControl register. This breaks PHY speed down. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata: print device model and firmware revision for ATAPI devicesAlbert Lee
For ATA/CFA devices, libata prints out the device model and firmware revision. Do the same for ATAPI devices. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata: fix probe time irq printoutsOlof Johansson
Most drivers don't seem to fill out the host->irq field, resulting in the wrong (no) irq being reported at probe time. For example, sil24 on my system: ata1: SATA max UDMA/100 cmd 0xd00008009001f000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 ata2: SATA max UDMA/100 cmd 0xd000080090021000 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 0 Since they're allocated and set up in ata_host_activate(), just save them away there. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09libata: disable NCQ for HITACHI HTS541680J9SA00/SB21C7EPTejun Heo
HITACHI HTS541680J9SA00/SB21C7EP spuriously completes NCQ commands. Blacklist it for NCQ. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-09remove unused variable in pata_isapnpYoichi Yuasa
This patch has removed unused variable in pata_ispnp. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-08Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: Fix invalid assertion during write on 64k pages ocfs2: Fix masklog breakage
2007-06-08Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [CIPSO]: Fix several unaligned kernel accesses in the CIPSO engine. [NetLabel]: consolidate the struct socket/sock handling to just struct sock [IPV4]: Do not remove idev when addresses are cleared
2007-06-08Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Handle PCI bridges without 'ranges' property. [SPARC64]: Include <linux/rwsem.h> instead of <asm/rwsem.h>.
2007-06-08Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: OHCI: Fix machine check in ohci_hub_status_data USB: Fix up bogus bInterval values in endpoint descriptors USB: cxacru: ignore error trying to start ADSL in atm_start USB: cxacru: create sysfs attributes in atm_start instead of bind USB: cxacru: add Documentation file USB: UNUSUAL_DEV: Sync up some reported devices from Ubuntu USB: usb gadgets avoid le{16,32}_to_cpup() usblp: Don't let suspend to kill ->used USB: set default y for CONFIG_USB_DEVICE_CLASS
2007-06-08Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: firmware: remove orphaned Email kobject: use the proper printk level for kobject error Driver core: kill unused code Driver core: keep PHYSDEV for old struct class_device update Documentation/driver-model/platform.txt
2007-06-08Protect <linux/console_struct.h> from multiple inclusionRobert P. J. Day
Prevent <linux/console_struct.h> from being included more than once, otherwise you get a redefinition error if you happen to include <linux/vt_kern.h> first. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08update checkpatch.pl to version 0.04Andy Whitcroft
This version brings a some new tests, and a host of changes to fix false positives, of particular note: - check for and report #if 0 - extend checking of line lengths and spacing for .pl, .sh etc - extends the pointer type checks to multiple levels - updates printk handling to track newlines - adds a wrapped patch detector - drops the leading component of the filenames - extends switch indent handling to switch statmentes rooted in the context - adds foo * bar single pointer checks This version of checkpatch.pl can be found at the following URL: http://www.shadowen.org/~apw/public/checkpatch/checkpatch.pl-0.04 Full Changelog: Andy Whitcroft (16): allow checking line lengths and spacing on other source files clean up that whitespace sanitise the input line standardising the content of quotes clean up pointer type * and space checks fix up the sanitiser so it maintains the line length apply the printk facility checks only to the first printk in a set switch/case indent checks may anchor in the context add a wrapped patch detector put the #ifdef in C file checks on ice asm volatile is acceptable check for and report #if 0 drop the leading component of the filename as patches are -p1 use the original line when reporting operator errors correct spelling of Joel's name Version: 0.04 add support for struct foo * bar checks Geert Uytterhoeven (1): Fix checkpatch.pl name in usage template Randy Dunlap (1): checkpatch: produce fewer lines of output Signed-off-by: Andy Whitcroft <apw@shadowen.org> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08hexdump: more output formattingRandy Dunlap
Add a prefix string parameter. Callers are responsible for any string length/alignment that they want to see in the output. I.e., callers should pad strings to achieve alignment if they want that. Add rowsize parameter. This is the number of raw data bytes to be printed per line. Must be 16 or 32. Add a groupsize parameter. This allows callers to dump values as 1-byte, 2-byte, 4-byte, or 8-byte numbers. Default is 1-byte numbers. If the total length is not an even multiple of groupsize, 1-byte numbers are printed. Add an "ascii" output parameter. This causes ASCII data output following the hex data output. Clean up some doc examples. Align the ASCII output on all lines that are produced by one call. Add a new interface, print_hex_dump_bytes(), that is a shortcut to print_hex_dump(), using default parameter values to print 16 bytes in byte-size chunks of hex + ASCII output, using printk level KERN_DEBUG. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08MAINTAINERS: correctionsAlan Cox
The UFS entry was misformatted The NEC V850 links are all broken The Berkshire watchdog links are all broken Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08checkpatch: produce fewer lines of outputRandy Dunlap
Produce one less line of output per flagged incident. Change this: use tabs not spaces PATCH: /home/rddunlap/arcmsr1200014.patch4:756: FILE: b/drivers/scsi/arcmsr/arcmsr_hba.c:1843: + return PCI_ERS_RESULT_NEED_RESET;$ to this: use tabs not spaces #756: FILE: b/drivers/scsi/arcmsr/arcmsr_hba.c:1843: + return PCI_ERS_RESULT_NEED_RESET;$ Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08reiserfs: mailing list has movedJeff Mahoney
This patch changes MAINTAINERS to reflect the new location of the reiserfs development mailing list. The old list forwards to the new one. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08x86_64: oops_begin() fixAndrew Morton
We don't want to see this: > BUG: using smp_processor_id() in preemptible [00000001] code: bash/3857 > caller is oops_begin+0xb/0x6f > > Call Trace: > [<ffffffff8020ab4d>] show_trace+0x34/0x4f > [<ffffffff8020ab7a>] dump_stack+0x12/0x17 > [<ffffffff8030d92d>] debug_smp_processor_id+0xad/0xbc > [<ffffffff8042388f>] oops_begin+0xb/0x6f > [<ffffffff8042520b>] do_page_fault+0x66a/0x7c0 > [<ffffffff804234bd>] error_exit+0x0/0x84 > coming out when the kernel is trying to oops. Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-08fix sysrq-m oopsBob Picco
We aren't sampling for holes in memory. Thus we encounter a section hole with empty section map pointer for SPARSEMEM and OOPs for show_mem. This issue has been seen in 2.6.21, current git and current mm. The patch below is for mainline and mm. It was boot tested for SPARSEMEM, current VMEMMAP of Andy's in mm ml and DISCONTIGMEM. A slightly different patch will be posted to stable for 2.6.21. Previous to commit f0a5a58aa812b31fd9f197c4ba48245942364eae memory_present was called for node_start_pfn to node_end_pfn. This would cover the hole(s) with reserved pages and valid sections. Most SPARSEMEM supported arches do a pfn_valid check in show_mem before computing the page structure address. This issue was brought to my attention on IRC by Arnaldo Carvalho de Melo. Thanks to Arnaldo for testing. Signed-off-by: Bob Picco <bob.picco@hp.com> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: Andi Kleen <ak@suse.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 10:11:11 +0000