aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-20Consolidate of_get_parentStephen Rothwell
This requires creating dummy of_node_{get,put} routines for sparc and sparc64. It also adds a read_lock around the parent accesses. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20Consolidate of_find_propertyStephen Rothwell
The only change here is that a readlock is taken while the property list is being traversed on Sparc where it was not taken previously. Also, Sparc uses strcasecmp to compare property names while PowerPC uses strcmp. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20Consolidate of_device_is_compatibleStephen Rothwell
The only difference here is that Sparc uses strncmp to match compatibility names while PowerPC uses strncasecmp. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20Start split out of common open firmware codeStephen Rothwell
This creates drivers/of/base.c (depending on CONFIG_OF) and puts the first trivially common bits from the prom.c files into it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-20Split out common parts of prom.hStephen Rothwell
This creates linux/of.h and includes asm/prom.h from it. We also include linux/of.h from asm/prom.h while we transition. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: David S. Miller <davem@davemloft.net>
2007-07-19Merge branch 'kmem_death' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'kmem_death' of master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: mm: Remove slab destructors from kmem_cache_create().
2007-07-19fallout from kbuild changesAl Viro
Change in 'kbuild: do section mismatch check on full vmlinux' should've been replicated in arch/um/Makefile. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20mm: Remove slab destructors from kmem_cache_create().Paul Mundt
Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-19Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (23 commits) ide: add support for SCSI ioctls to ide-floppy ide: remove stale changelog from setup-pci.c ide: remove stale changelog/comments/TODO from ide.c ide-cris: handle PIO auto-tuning in tune_cris_ide() ide: add PIO masks ide: remove ide_find_best_pio_mode() ide: drop "PIO data" argument from ide_get_best_pio_mode() ide: ide_find_best_pio_mode() fixes (take 2) ide: add ide_pio_cycle_time() helper (take 2) sc1200: remove stale Power Management code ide: ide_start_power_step() fix WRT disabling DMA serverworks: fix DMA serverworks: always tune PIO ide: add ide_pci_device_t.host_flags (take 2) ide: add ide_dev_has_iordy() helper (take 4) ide: make ide_get_best_pio_mode() print info if overriding PIO mode siimage: PIO mode setup fixes (take 2) atiixp: PIO mode setup fixes ide: Stop mapping ROMs IDE: Remove references to dead ETRAX-related variables. ...
2007-07-19coda breakageAl Viro
a) switch by loff_t == __cmpdi2 use. Replaced with a couple of obvious ifs; update of ->f_pos in the first one makes sure that we do the right thing in all cases. b) block_signals() and unblock_signals() are globals on UML. Renamed coda ones; in principle UML probably ought to do rename as well, but that's another story. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19missed cong_avoid() instanceAl Viro
Removal of rtt argument in ->cong_avoid() had missed tcp_htcp.c instance. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-20ide: add support for SCSI ioctls to ide-floppyBartlomiej Zolnierkiewicz
Now that ide-floppy supports SG_IO we can add support for SCSI ioctls (except deprecated SCSI_IOCTL_SEND_COMMAND and legacy CDROM_SEND_PACKET ones - we can add them later iff really needed). While at it remove handling of CDROMEJECT and CDROMCLOSETRAY ioctls from generic_ide_ioctl(): - This prevents ide-{disk,tape,scsi} device drivers from obtaining REQ_TYPE_BLOCK_PC type requests which are currently unsupported by these drivers and which are potentially harmful (as reported by Andrew). - There is no functionality loss since aforementioned ioctls will now be handled by idefloppy_ioctl()->scsi_cmd_ioctl() (for devices using ide-floppy driver) and by idecd_ioctl->cdrom_ioctl()->scsi_cmd_ioctl() (for devices using ide-cd driver). Cc: Jens Axboe <jens.axboe@oracle.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: remove stale changelog from setup-pci.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: remove stale changelog/comments/TODO from ide.cBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide-cris: handle PIO auto-tuning in tune_cris_ide()Bartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: add PIO masksBartlomiej Zolnierkiewicz
* Add ATA_PIO[0-6] defines to <linux/ata.h>. * Add ->pio_mask field to ide_pci_device_t and ide_hwif_t. * Add PIO masks to host drivers. <linux/ata.h> change ACK-ed by Jeff Garzik <jeff@garzik.org>. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: remove ide_find_best_pio_mode()Bartlomiej Zolnierkiewicz
* Add ->host_flags to ide_hwif_t to store ide_pci_device_t.host_flags, assign it in setup-pci.c:ide_pci_setup_ports(). * Add IDE_HFLAG_PIO_NO_{BLACKLIST,DOWNGRADE} to ide_pci_device_t.host_flags and teach ide_get_best_pio_mode() about them. Also remove needless !drive->id check while at it (drive->id is always present). * Convert amd74xx, via82cxxx and ide-timing.h to use ide_get_best_pio_mode() and then remove no longer needed ide_find_best_pio_mode(). There should be no functionality changes caused by this patch. Acked-by: Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: drop "PIO data" argument from ide_get_best_pio_mode()Bartlomiej Zolnierkiewicz
* Drop no longer needed "PIO data" argument from ide_get_best_pio_mode() and convert all users accordingly. * Remove no longer needed ide_pio_data_t. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: ide_find_best_pio_mode() fixes (take 2)Bartlomiej Zolnierkiewicz
* Check IORDY bit for PIO modes > 2. * Some devices claim maximum PIO mode > 2 in id->tPIO, they were punished too severly for this by being limited to PIO_SLOW. Limit them to PIO2 instead. v2: * Fix PIO number being returned incorrectly instead of PIO mode (Noticed by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: add ide_pio_cycle_time() helper (take 2)Bartlomiej Zolnierkiewicz
* Add ide_pio_cycle_time() helper. * Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers (previously cycle time given by the device was only used for "pio" == 255). * Remove no longer needed ide_pio_data_t.cycle_time field. v2: * Fix "ata_" prefix (Noticed by Jeff). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20sc1200: remove stale Power Management codeBartlomiej Zolnierkiewicz
* Nowadays core IDE code handles restoring of PIO and DMA modes (ide-io.c:ide_start_power_step() etc) so remove open-coded version from sc1200_resume(). There should be no change in behavior because settings done by sc1200_resume() were always overridden by generic_ide_resume() and ide_{start,stop}_power_step(). * Bump driver version. Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: ide_start_power_step() fix WRT disabling DMABartlomiej Zolnierkiewicz
* Do the same thing as probe_hwif() and always disable DMA so chipset DMA enabled bit gets cleared (if the drive doesn't support DMA ide_set_dma() won't try to tune it anyway). * Add TODO comment about respecting ->using_dma setting. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20serverworks: fix DMABartlomiej Zolnierkiewicz
The driver used to depend on BIOS settings for deciding whether it is OK to use DMA. However it seems that BIOS doesn't always handle all cases correctly so just let IDE core to decide about this. It should be a safe thing to do now, after the driver went through heavy bugfixing. Thanks for bugreport and testing the patch goes out to Sven Niedner. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20serverworks: always tune PIOBartlomiej Zolnierkiewicz
* Always set ->autotune so PIO gets correctly auto-tuned (previously ->autotune was only set when ->dma_base wasn't available, however ->ide_dma_check()/->speedproc() was always trying to tune PIO when tuning DMA). * Move code responsible for programming chipset for PIO mode from svwks_tune_chipset() to svwks_tune_pio(). Don't tune PIO when tuning DMA (this is no longer needed since ->autotune is always set now). * Handle PIO modes early in svwks_tune_chipset() so DMA configuration registers don't get cleared when programming PIO mode. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: add ide_pci_device_t.host_flags (take 2)Bartlomiej Zolnierkiewicz
* Rename ide_pci_device_t.flags to ide_pci_device_t.host_flags and IDEPCI_FLAG_ISA_PORTS flag to IDE_HFLAG_ISA_PORTS. * Add IDE_HFLAG_SINGLE flag for single channel devices. * Convert core code and all IDE PCI drivers to use IDE_HFLAG_SINGLE and remove no longer needed ide_pci_device_t.channels field. v2: * Fix issues noticed by Sergei: - correct code alignment in scc_pata.c - s/IDE_HFLAG_SINGLE/~IDE_HFLAG_SINGLE/ in serverworks.c Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: add ide_dev_has_iordy() helper (take 4)Bartlomiej Zolnierkiewicz
* Add ide_dev_has_iordy() helper and use it sl82c105 host driver. * Remove no longer needed ide_pio_data_t.use_iordy field. v2/v3: * Fix issues noticed by Sergei: - correct patch description - fix comment in ide_get_best_pio_mode() v4: * Fix "ata_" prefix (Noticed by Jeff). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: make ide_get_best_pio_mode() print info if overriding PIO modeBartlomiej Zolnierkiewicz
* Print info about overriding PIO mode in ide_get_best_pio_mode(). * Remove info about overriding PIO mode from cmd64{0,x} host drivers. * Remove no longer needed ide_pio_data_t.overridden field. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20siimage: PIO mode setup fixes (take 2)Bartlomiej Zolnierkiewicz
* Add sil_tuneproc() wrapper for siimage_tuneproc() which also sets PIO mode on the device. * Add missing ide_get_best_pio_mode() call to sil_tuneproc() so "pio" == 255 (autotune) is handled correctly (previously PIO0 was used) and "pio" values > 4 && < 255 are filtered to PIO4 (instead of PIO0). * Add code limiting maximum PIO mode according to the pair device capabilities to sil_tuneproc(). * Convert users of config_siimage_chipset_for_pio() to use sil_tune_pio() and sil_tuneproc(). This fixes PIO fallback in siimage_config_drive_for_dma() to use max PIO mode available instead of PIO4 (config_siimage_chipset_for_pio() used wrong arguments for ide_get_best_pio_mode() and as a results always tried to set PIO4). * Remove no longer needed siimage_taskfile_timing() and config_siimage_chipset_for_pio(). * Enable ->autotune unconditionally and remove PIO tuning for UDMA/MDMA modes from siimage_speedproc() * Bump driver version. v2: * Fix issues noticed by Sergei: - correct pair device check - trim only taskfile PIO to the slowest of the master/slave - enable ->autotune unconditionally and remove PIO tuning for UDMA/MDMA modes from siimage_speedproc() - add TODO item for IORDY bugs - minor cleanups Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20atiixp: PIO mode setup fixesBartlomiej Zolnierkiewicz
* Split off exisiting atiixp_tuneproc() into atiixp_tune_pio() and then add setting device PIO mode to atiixp_tuneproc(). * Add missing ide_get_best_pio_mode() call to atiixp_tuneproc() so "pio" == 255 (autotune) is handled correctly and "pio" values > 4 && < 255 are filtered to PIO4 (previously "pio" == 5 could result in wrong timings being used and "pio" values > 4 && < 255 in an OOPS). * Handle PIO modes early in atiixp_speedproc() so save_mdma_mode[] doesn't get cleared. * In atiixp_dma_check(): - fix max_mode argument for ide_get_best_pio_mode() - don't call atiixp_dma_2_pio() so PIO1 doesn't get remapped to PIO0 - use atiixp_tuneproc() instead of atiixp_speedproc() * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20ide: Stop mapping ROMsAlan Cox
Various old IDE drivers go mapping ROM devices for no apparent reason and without using the ROM mapping API we now have. They don't actually use the ROM they map and the new libata drivers are happy without it being mapped so rather than port them lets just junk it for the next -rc1. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20IDE: Remove references to dead ETRAX-related variables.Robert P. J. Day
The two CONFIG variables CONFIG_ETRAX_IDE_CSE1_16_RESET CONFIG_ETRAX_IDE_CSP0_8_RESET appear to have been dead since way back in 2.5.xx days: http://www.linuxhq.com/kernel/v2.5/75/arch/cris/drivers/Kconfig Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Michael Starvik <starvik@axis.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20PCMCIA: Add another MemoryCard to ide-cs/pata_pcmciaMarcin Juszkiewicz
One card submitted by user. Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20scc_pata.c: Workaround for errata A308 (take 2)Kou Ishizaki
Workaround for errata A308: turn down the UDMA mode and retry the DMA command when the data lost condition is detected. take2: udma_filter() hook is used to limit ATAPI UDMA mode. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20scc_pata: Use inline function for eieioKumar Gala
Move to using inline function variant of eieio instead of inline assmebly. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Cc: kou.ishizaki@toshiba.co.jp Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-19Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: use SECINITSID_NETMSG instead of SECINITSID_UNLABELED for NetLabel SELinux: enable dynamic activation/deactivation of NetLabel/SELinux enforcement
2007-07-19Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Fix inode size update before data write in xfs_setattr [XFS] Allow punching holes to free space when at ENOSPC [XFS] Implement ->page_mkwrite in XFS. [FS] Implement block_page_mkwrite. Manually fix up conflict with Nick's VM fault handling patches in fs/xfs/linux-2.6/xfs_file.c Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19i386: Allow KVM on i386 nonpaeAvi Kivity
Currently, CONFIG_X86_CMPXCHG64 both enables boot-time checking of the cmpxchg64b feature and enables compilation of the set_64bit() family. Since the option is dependent on PAE, and since KVM depends on set_64bit(), this effectively disables KVM on i386 nopae. Simplify by removing the config option altogether: the boot check is made dependent on CONFIG_X86_PAE directly, and the set_64bit() family is exposed without constraints. It is up to users to check for the feature flag (KVM does not as virtualiation extensions imply its existence). Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19Merge git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds
* git://git.linux-nfs.org/pub/linux/nfs-2.6: NFSv4: handle lack of clientaddr in option string NFSv4: debug print ntohl(status) in nfs client callback xdr code SUNRPC: Clean up the sillyrename code NFS: Introduce struct nfs_removeargs+nfs_removeres NFS: Use dentry->d_time to store the parent directory verifier. SUNRPC: move bkl locking and xdr proc invocation into a common helper NFSv4: Fix the nfsv4 readlink reply buffer alignment NFSv4: Fix the readdir reply buffer alignment NFSv4: More NFSv4 xdr cleanups NFSv4: Try to recover from getfh failures in nfs4_xdr_dec_open NFSv4: 'constify' lookup arguments. NFSv4: Don't fail nfs4_xdr_dec_open if decode_restorefh() failed NFSv4: Fix open state recovery NFSD/SUNRPC: Fix the automatic selection of RPCSEC_GSS
2007-07-19Update .gitignore for arch/i386/bootMatthew Wilcox
With the new setup code, we generate a couple more files Signed-off-by: Matthew Wilcox <matthew@wil.cx> [ .. and do the same for x86-64 - Alexey ] Acked-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19fix spufs build after ->fault changesChristoph Hellwig
83c54070ee1a2d05c89793884bea1a03f2851ed4 broke spufs by incorrectly updating the code, this patch gets it to compile again. It's probably still broken due to the scheduler changes, but this at least makes sure cell kernels can still be built. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (33 commits) xtensa: use DATA_DATA in xtensa powerpc: add missing DATA_DATA to powerpc cris: use DATA_DATA in cris kallsyms: remove usage of memmem and _GNU_SOURCE from scripts/kallsyms.c kbuild: use -fno-optimize-sibling-calls unconditionally kconfig: reset generated values only if Kconfig and .config agree. kbuild: fix the warning when running make tags kconfig: strip 'CONFIG_' automatically in kernel configuration search kbuild: use POSIX BRE in headers install target Whitelist references from __dbe_table to .init modpost white list pattern adjustment kbuild: do section mismatch check on full vmlinux kbuild: whitelist references from variables named _timer to .init.text kbuild: remove hardcoded _logo names from modpost kbuild: remove hardcoded apic_es7000 from modpost kbuild: warn about references from .init.text to .exit.text kbuild: consolidate section checks kbuild: refactor code in modpost to improve maintainability kbuild: ignore section mismatch warnings originating from .note section kbuild: .paravirtprobe section is obsolete, so modpost doesn't need to handle it ...
2007-07-19Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits) i2c: Delete the i2c-isa pseudo bus driver hwmon: refuse to load abituguru driver on non-Abit boards hwmon: fix Abit Uguru3 driver detection on some motherboards hwmon/w83627ehf: Be quiet when no chip is found hwmon/w83627ehf: No need to initialize fan_min hwmon/w83627ehf: Export the thermal sensor types hwmon/w83627ehf: Enable VBAT monitoring hwmon/w83627ehf: Add support for the VID inputs hwmon/w83627ehf: Fix timing issues hwmon/w83627ehf: Add error messages for two error cases hwmon/w83627ehf: Convert to a platform driver hwmon/w83627ehf: Update the Kconfig entry make coretemp_device_remove() static hwmon: Add LM93 support hwmon: Improve the pwmN_enable documentation hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM hwmon: Add support for newer uGuru's hwmon/f71805f: Add temperature-tracking fan control mode hwmon/w83627ehf: Preserve speed reading when changing fan min hwmon: fix detection of abituguru volt inputs ... Manual fixup of trivial conflict in MAINTAINERS file
2007-07-19random: fix bound check ordering (CVE-2007-3105)Matt Mackall
If root raised the default wakeup threshold over the size of the output pool, the pool transfer function could overflow the stack with RNG bytes, causing a DoS or potential privilege escalation. (Bug reported by the PaX Team <pageexec@freemail.hu>) Cc: Theodore Tso <tytso@mit.edu> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: ->fallocate() support
2007-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: [PATCH] sched: implement cpu_clock(cpu) high-speed time source [PATCH] sched: fix the all pinned logic in load_balance_newidle() [PATCH] sched: fix newly idle load balance in case of SMT [PATCH] sched: sched_cacheflush is now unused
2007-07-19user namespace: fix copy_user_ns return valueSerge E. Hallyn
When a CONFIG_USER_NS=n and a user tries to unshare some namespace other than the user namespace, the dummy copy_user_ns returns NULL rather than the old_ns. This value then gets assigned to task->nsproxy->user_ns, so that a subsequent setuid, which uses task->nsproxy->user_ns, causes a NULL pointer deref. Fix this by returning old_ns. Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19slub: fix ksize() for zero-sized pointersLinus Torvalds
The slab and slob allocators already did this right, but slub would call "get_object_page()" on the magic ZERO_SIZE_PTR, with all kinds of nasty end results. Noted by Ingo Molnar. Cc: Ingo Molnar <mingo@elte.hu> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19Fix up non-NUMA SLAB configuration for zero-sized allocationsLinus Torvalds
I suspect Christoph tested his code only in the NUMA configuration, for the combination of SLAB+non-NUMA the zero-sized kmalloc's would not work. Of course, this would only trigger in configurations where those zero- sized allocations happen (not very common), so that may explain why it wasn't more widely noticed. Seen by by Andi Kleen under qemu, and there seems to be a report by Michael Tsirkin on it too. Cc: Andi Kleen <ak@suse.de> Cc: Roland Dreier <rdreier@cisco.com> Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Christoph Lameter <clameter@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19[PATCH] sched: implement cpu_clock(cpu) high-speed time sourceIngo Molnar
Implement the cpu_clock(cpu) interface for kernel-internal use: high-speed (but slightly incorrect) per-cpu clock constructed from sched_clock(). This API, unused at the moment, will be used in the future by blktrace, by the softlockup-watchdog, by printk and by lockstat. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-07-19[PATCH] sched: fix the all pinned logic in load_balance_newidle()Suresh Siddha
nr_moved is not the correct check for triggering all pinned logic. Fix the all pinned logic in the case of load_balance_newidle(). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 02:58:59 +0000