aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-03-26Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-03-26ixgbe: Allow Priority Flow Control settings to survive a device resetPJ Waskiewicz
When changing DCB parameters, ixgbe needs to have the MAC reset. The way the flow control code is setup today, PFC will be disabled on a reset. This patch adds a new flow control type for PFC, and then has the netlink layer take care of toggling which type of flow control to enable. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26net: core: remove unneeded include in net/core/utils.c.Rami Rosen
Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000e: update version numberJesse Brandeburg
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000e: fix close interrupt raceJesse Brandeburg
As noticed by Alan Cox, it is possible for e1000e to exit its interrupt handler or NAPI with interrupts enabled even when the driver is unloading or being configured administratively down. fix related to fix for: http://bugzilla.kernel.org/show_bug.cgi?id=12876 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000e: fix loss of multicast packetsJesse Brandeburg
e1000e (and e1000, igb, ixgbe, ixgb) all do a series of operations each time a multicast address is added. The flow goes something like 1) stack adds one multicast address 2) stack passes whole current list of unicast and multicast addresses to driver 3) driver clears entire list in hardware 4) driver programs each multicast address using iomem in a loop This was causing multicast packets to be lost during the reprogramming process. reference with test program: http://kerneltrap.org/mailarchive/linux-netdev/2009/3/14/5160514/thread Thanks to Dave Boutcher for his report and test program. This driver fix prepares an array all at once in memory and programs it in one shot to the hardware, not requiring an "erase" cycle. It would still be possible for packets to be dropped while the receiver is off during reprogramming. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Dave Boutcher <daveboutcher@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000e: commonize tx cleanup routine to match e1000 & igbAlexander Duyck
This change updates the e1000e tx cleanup routine to more closely match what already exists in igb and e1000. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26netfilter: fix nf_logger name in ebt_ulog.Eric Leblond
This patch renames the ebt_ulog nf_logger from "ulog" to "ebt_ulog" to be in sync with other modules naming. As this name was currently only used for informational purpose, the renaming should be harmless. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26netfilter: fix warning in ebt_ulog init function.Eric Leblond
The ebt_ulog module does not follow the fixed convention about function return. Loading the module is triggering the following message: sys_init_module: 'ebt_ulog'->init suspiciously returned 1, it should follow 0/-E convention sys_init_module: loading module anyway... Pid: 2334, comm: modprobe Not tainted 2.6.29-rc5edenwall0-00883-g199e57b #146 Call Trace: [<c0441b81>] ? printk+0xf/0x16 [<c02311af>] sys_init_module+0x107/0x186 [<c0202cfa>] syscall_call+0x7/0xb The following patch fixes the return treatment in ebt_ulog_init() function. Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26netfilter: fix warning about invalid const usageEric Leblond
This patch fixes the declaration of the logger structure in ebt_log and ebt_ulog: I forgot to remove the const option from their declaration in the commit ca735b3aaa945626ba65a3e51145bfe4ecd9e222 ("netfilter: use a linked list of loggers"). Pointed-out-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Eric Leblond <eric@inl.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000: fix close race with interruptJesse Brandeburg
this is in regards to http://bugzilla.kernel.org/show_bug.cgi?id=12876 where it appears that e1000 can leave its interrupt enabled after exiting the driver. Fix the bug by making the interrupt enable paths more aware of the driver exiting. Thanks to Alan Cox for the poke and initial investigation. CC: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000: cleanup clean_tx_irq routine so that it completely cleans ringAlexander Duyck
The tx cleanup routine was stopping after 64 packets and this was causing issues resulting in the ring not being completely cleaned. This change updates the driver to clean the entire ring and if it doesn't it then will retry on the next pass. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-26e1000: fix tx hang detect logic and address dma mapping issuesAlexander Duyck
This patch changes the dma mapping to better support skb_dma_map/skb_dma_unmap and addresses and redefines the tx hang logic to be based off of time stamp instead of if the dma field is populated Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25bridge: bad error handling when adding invalid ether addressStephen Hemminger
This fixes an crash when empty bond device is added to a bridge. If an interface with invalid ethernet address (all zero) is added to a bridge, then bridge code detects it when setting up the forward databas entry. But the error unwind is broken, the bridge port object can get freed twice: once when ref count went to zeo, and once by kfree. Since object is never really accessible, just free it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25bonding: select current active slave when enslaving device for mode tlb and albJiri Pirko
I've hit an issue on my system when I've been using RealTek RTL8139D cards in bonding interface in mode balancing-alb. When I enslave a card, the current active slave (bond->curr_active_slave) is not set and the link is therefore not functional. ---- # cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008) Bonding Mode: adaptive load balancing Primary Slave: None Currently Active Slave: None MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:1f:1f:01:2f:22 ---- The thing that gets it right is when I unplug the cable and then I put it back into the NIC. Then the current active slave is set to eth1 and link is working just fine. Here is dmesg log with bonding DEBUG messages turned on: ---- ADDRCONF(NETDEV_UP): bond0: link is not ready event_dev: bond0, event: 1 IFF_MASTER event_dev: bond0, event: 8 IFF_MASTER bond_ioctl: master=bond0, cmd=35216 slave_dev=cac5d800: slave_dev->name=eth1: eth1: ! NETIF_F_VLAN_CHALLENGED event_dev: eth1, event: 8 eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1 event_dev: eth1, event: 1 event_dev: eth1, event: 8 IFF_SLAVE Initial state of slave_dev is BOND_LINK_UP bonding: bond0: enslaving eth1 as an active interface with an up link. ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready event_dev: bond0, event: 4 IFF_MASTER bond0: no IPv6 routers present <<<<cable unplug>>>> eth1: link down event_dev: eth1, event: 4 IFF_SLAVE bonding: bond0: link status definitely down for interface eth1, disabling it event_dev: bond0, event: 4 IFF_MASTER <<<<cable plug>>>> eth1: link up, 100Mbps, full-duplex, lpa 0xC5E1 event_dev: eth1, event: 4 IFF_SLAVE bonding: bond0: link status definitely up for interface eth1. bonding: bond0: making interface eth1 the new active one. event_dev: eth1, event: 8 IFF_SLAVE event_dev: eth1, event: 8 IFF_SLAVE bonding: bond0: first active interface up! event_dev: bond0, event: 4 IFF_MASTER ---- The current active slave is set by calling bond_select_active_slave() function from bond_miimon_commit() function when the slave (eth1) link goes to state up. I also tested this on other machine with Broadcom NetXtreme II BCM5708 1000Base-T NIC and there all works fine. The thing is that this adapter is down and goes up after few seconds after it is enslaved. This patch calls bond_select_active_slave() in bond_enslave() function for modes alb and tlb and makes sure that the current active slave is set up properly even when the slave state is already up. Tested on both systems, works fine. Notice: The same problem can maybe also occrur in mode 8023AD but I'm unable to test that. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25gianfar: reallocate skb when headroom is not enough for fcbLi Yang
Gianfar uses a hardware header FCB for offloading. However when used with bridging or IP forwarding, TX skb might not have enough headroom for the FCB. Reallocate skb for such cases. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25Bump release date to 25Mar2009 and version to 0.22Florian Fainelli
This patch bumps the driver release date to March 25th 2009 and release version to 0.22. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25r6040: Fix second PHY addressFlorian Fainelli
This patch fixes the second PHY address which is strapped to be at PHY address 3 instead of 2. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25qeth: fix wait_event_timeout handlingHeiko Carstens
wait_event_timeout just takes the numnber of jiffies to wait as an argument. That value does not include jiffies itself. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25qeth: check for completion of a running recoveryUrsula Braun
When a recovery is started for a qeth device, additional invocations to change a mac address, to configure a VLAN interface on top, or to add multicast addresses should wait till recovery is finished, otherwise recovery might fail. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25qeth: unregister MAC addresses during recovery.Klaus-Dieter Wacker
qeth: Unregister MAC addresses from device (layer 2) during recovery cycle. When the device is set online the MAC addresses are registered again on the device. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25qeth: remove EDDPFrank Blaschka
Performance measurements showed EDDP does not lower CPU costs but increase them. So we dump out EDDP code from qeth driver. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25qeth: add statistics for tx csumFrank Blaschka
Add statistics counter for software tx checksumming. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25qeth: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25rndis_wlan: Fix build with netdev_ops compat disabled.David S. Miller
Instead of storing a private ->set_multicast_list, just have a private netdev ops. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ax88796: Add method to take MAC from platform dataDaniel Mack
Implement a way to provide the MAC address for ax88796 devices from their platform data. Boards might decide to set the address programmatically, taken from boot tags or other sources. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24drivers/net/ax88796.c: take IRQ flags from platform_deviceDaniel Mack
This patch adds support to the ax88796 ethernet driver to take IRQ flags given by the platform_device definition. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24e1000e: add support for 82574 device ID 0x10F6Bruce Allan
Add device ID for a new variant of the 82574 adapter. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Acked-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ipv6: Fix conflict resolutions during ipv6 bindingVlad Yasevich
The ipv6 version of bind_conflict code calls ipv6_rcv_saddr_equal() which at times wrongly identified intersections between addresses. It particularly broke down under a few instances and caused erroneous bind conflicts. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ipv6: Make v4-mapped bindings consistent with IPv4Vlad Yasevich
Binding to a v4-mapped address on an AF_INET6 socket should produce the same result as binding to an IPv4 address on AF_INET socket. The two are interchangable as v4-mapped address is really a portability aid. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ipv6: Allow ipv4 wildcard binds after ipv6 address bindsVlad Yasevich
The IPv4 wildcard (0.0.0.0) address does not intersect in any way with explicit IPv6 addresses. These two should be permitted, but the IPv4 conflict code checks the ipv6only bit as part of the test. Since binding to an explicit IPv6 address restricts the socket to only that IPv6 address, the side-effect is that the socket behaves as v6-only. By explicitely setting ipv6only in this case, allows the 2 binds to succeed. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ipv6: Disallow binding to v4-mapped address on v6-only socket.Vlad Yasevich
A socket marked v6-only, can not receive or send traffic to v4-mapped addresses. Thus allowing binding to v4-mapped address on such a socket makes no sense. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24be2net: cleanup rx/tx rate calculationsSathya Perla
Hi, Pls accept this patch to cleanup rx/tx rate calculations as follows: - check for jiffies wraparound - remove typecast of a denominator - do rate calculation only in workqueue context periodically Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2009-03-24netlink: add NETLINK_NO_ENOBUFS socket flagPablo Neira Ayuso
This patch adds the NETLINK_NO_ENOBUFS socket flag. This flag can be used by unicast and broadcast listeners to avoid receiving ENOBUFS errors. Generally speaking, ENOBUFS errors are useful to notify two things to the listener: a) You may increase the receiver buffer size via setsockopt(). b) You have lost messages, you may be out of sync. In some cases, ignoring ENOBUFS errors can be useful. For example: a) nfnetlink_queue: this subsystem does not have any sort of resync method and you can decide to ignore ENOBUFS once you have set a given buffer size. b) ctnetlink: you can use this together with the socket flag NETLINK_BROADCAST_SEND_ERROR to stop getting ENOBUFS errors as you do not need to resync (packets whose event are not delivered are drop to provide reliable logging and state-synchronization). Moreover, the use of NETLINK_NO_ENOBUFS also reduces a "go up, go down" effect in terms of performance which is due to the netlink congestion control when the listener cannot back off. The effect is the following: 1) throughput rate goes up and netlink messages are inserted in the receiver buffer. 2) Then, netlink buffer fills and overruns (set on nlk->state bit 0). 3) While the listener empties the receiver buffer, netlink keeps dropping messages. Thus, throughput goes dramatically down. 4) Then, once the listener has emptied the buffer (nlk->state bit 0 is set off), goto step 1. This effect is easy to trigger with netlink broadcast under heavy load, and it is more noticeable when using a big receiver buffer. You can find some results in [1] that show this problem. [1] http://1984.lsi.us.es/linux/netlink/ This patch also includes the use of sk_drop to account the number of netlink messages drop due to overrun. This value is shown in /proc/net/netlink. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24myri10ge: update firmware headers to 1.4.41Brice Goglin
Update myri10ge firmware headers to firmware version 1.4.41. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24macb: fix warning "warning: unused variable `dev' "vibi sreenivasan
Removed unused variable dev Signed-off-by: vibi sreenivasan <vibi_sreenivasan@cms.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ucc_geth: Convert to net_device_opsJoakim Tjernlund
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24claw: fix minor findings from code analysis toolAndrew H. Richter
This patch fixes two problems in the claw driver identified by static code analysis: o Change in case differentiation of received sense codes o Use correct data length in claw hard_start_xmit routine Signed-off-by: Andrew H. Richter <richtera@us.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ctcm: fix minor findings from code analysis toolJoel A. Fowler
From: Ursula Braun <ursula.braun@de.ibm.com> This patch fixes problems in the ctcm driver identified by static code analysis: o remove an unnecessary always true condition in ctcm_unpack_skb o remove duplicate assignment in ctc_mpc_alloc_channel o remove an unnecessary always true condition in ctcmpc_send_sweep_resp o remove duplicate initialization in ctcmpc_unpack_skb o shorten if condition in mpc_action_go_inop o remove INOP event if mpc group is undefined in mpc_action_doxid7 Signed-off-by: Joel A. Fowler <fowlerja@us.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ctcm: avoid wraparound in length of incoming dataRoel Kluin
Since the receive code should tolerate any incoming garbage, it should be protected against a potential wraparound when manipulating length values within incoming data. block_len is unsigned, so a too large subtraction will cause a wraparound. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24ctcm: invalid return code from hard_start_xmitUrsula Braun
Avoid kernel warning by using the correct hard_start_xmit return code NETDEV_TX_BUSY for skb requeuing. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24claw: invalid return codes from hard_start_xmitUrsula Braun
Avoid kernel warnings by using the correct hard_start_xmit return code NETDEV_TX_BUSY for skb requeuing. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24netiucv: invalid return code from hard_start_xmitUrsula Braun
Avoid kernel warning by using the correct hard_start_xmit return code NETDEV_TX_BUSY for skb requeuing. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24lcs: invalid return codes from hard_start_xmit.Klaus-Dieter Wacker
Lcs hard_start_xmit routine issued return codes other than defined for this interface. Now lcs returns only either NETDEV_TX_OK or NETDEV_TX_BUSY. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24Use kthread instead of kernel_threadKlaus-Dieter Wacker
Lcs uses low-level kernel_thread implementation. All drivers should use <linux/kthread.h> API instead. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24net: Add dependent headers to trace/skb.hJosh Stone
The tracing header needs to include definitions for the macros used and the types referenced. This lets automated tracing tools like SystemTap make use of the tracepoint without any specific knowledge of its meaning (leaving that to the user). Signed-off-by: Josh Stone <jistone@redhat.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24arp_tables: ifname_compare() can assume 16bit alignmentEric Dumazet
Arches without efficient unaligned access can still perform a loop assuming 16bit alignment in ifname_compare() Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24netfilter: trivial Kconfig spelling fixesJan Engelhardt
Supplements commit 67c0d57930ff9a24c6c34abee1b01f7716a9b0e2. Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-next-2.6