aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-11-03powerpc: Merge remaining RTAS codePaul Mackerras
This moves rtas-proc.c and rtas_flash.c into arch/powerpc/kernel, since cell wants them as well as pseries (and chrp can use rtas-proc.c too, at least in principle). rtas_fw.c is gone, with its bits moved into rtas_flash.c and rtas.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02powerpc: Compile fixes for chrp/nvram.cPaul Mackerras
Include asm/rtas.h for prototype for rtas_call etc., and make the `done' variable unsigned int since that's what rtas_call wants. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02powerpc: include <linux/platform_device.h> in pegasos_eth.cPaul Mackerras
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02Merge Paulus' treeStephen Rothwell
2005-11-02powerpc: include lmb.h in arch/powerpc/platforms/powermac/setup.cPaul Mackerras
since it uses the lmb stuff in one place. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02Merge iSeries include file moveStephen Rothwell
2005-11-02[PATCH] powerpc: Move naca.h to platforms/iseriesDavid Gibson
These days, the NACA only exists on iSeries. Therefore, this patch moves naca.h from include/asm-ppc64 to arch/powerpc/platforms/iseries. There was one file including naca.h outside of platforms/iseries - arch/ppc64/kernel/udbg_scc.c. However, that's obviously a hangover from older days. The include is not necessary, so this patch simply removes it. Built and booted on iSeries, built for G5 (which uses udbg_scc.o). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02modify defines according to _ASM_POWERPC_ISERIES_Kelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02[PATCH] powerpc: Move dart.hDavid Gibson
asm-ppc64/dart.h is included in exactly one place - arch/powerpc/sysdev/u3_iommu.c. This patch, therefore, moves it into arch/powerpc/sysdev. While we're at it, update the #ifndef/#define protecting the include, and the filename in the comments of u3_iommu.c. Built and booted on pSeries and G5, built for ppc32 powermac. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02[PATCH] powerpc: Merge (move) numnodes.h and sparsemem.hDavid Gibson
The ppc64 versions of numnodes.h and sparsemem.h can be safely moved to asm-powerpc with no changes apart from changing the #define to the standard _ASM_POWERPC_ form. There are no ppc32 versions of these files, because they only have any effect if CONFIG_SPARSEMEM is enabled, which it never can be on ppc32. Built and booted on pSeries (POWER5), built for 32-bit powermac. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02fix incorrect dirKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02Merge ../linux-2.6Paul Mackerras
2005-11-02powerpc: clean up bug.h furtherPaul Mackerras
This simplifies the macros which are different between 32-bit and 64-bit. It also fixes a couple of printks on the bug->line element, which is now a long. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02Merge git://oak/home/sfr/kernels/iseries/workPaul Mackerras
2005-11-02merge filename and modify references to iseries/vio.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iSeries/mf.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02powerpc: exclude powerbook sleep code with CONFIG_PPC64 and CONFIG_PMPaul Mackerras
We were getting powerbook sleep code included, and giving compile errors, with CONFIG_PM=y on a 64-bit build. This excludes that code so the kernel will compile. One day BenH will implement on sleep on the G5... Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02merge filename and modify references to iseries/iseries_io.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02powerpc: Fix compile error with CONFIG_TAU=yPaul Mackerras
A couple of instances of "i" that needed to be changed to "cpu_id" got missed in the merge, because they were in CONFIG_TAU code. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02powerpc: Use rtas_call not call_rtas in CHRP codePaul Mackerras
The nvram driver imported from the ppc code uses call_rtas, but rtas_call is the name we are using in merged code (since ppc64 used that name, and it uses far more RTAS calls than ppc32). Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02merge filename and modify references to iseries/lpar_map.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02[PATCH] ppc bug.h namespace pollutionAl Viro
DATA_TYPE is really not a good thing to put into header that gets included all over the tree... Just make the cast always (long) and get rid of DATA_TYPE altogether. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02merge filename and modify references to iseries/it_lp_reg_save.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02[PATCH] powerpc: Merge futex.hDavid Gibson
This patch merges the ppc32 and ppc64 versions of futex.h, essentially by taking the ppc64 version as the powerpc version. The old ppc32 version did not implement the futex_atomic_op_inuser() callback (it always returned -ENOSYS), so FUTEX_WAKE_OP would not work on ppc32. In fact the ppc64 version of this function is almost suitable for ppc32 as well - the only change needed is to extend ppc_asm.h with a macro expanding to to the right pseudo-op to store a pointer (either ".long" or ".llong"). Built and booted on pSeries. Built for 32-bit powermac. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02[PATCH] powerpc: Fix merged ipcbuf.hDavid Gibson
Oops, when merging ipcbuf.h, I forgot that 'u64' can't be used in user-visible headers. This patch corrects the problem, replacing the unused fields with an array of four __u32s. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-02merge filename and modify references to iseries/it_lp_queue.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/it_lp_naca.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/it_exp_vpd_panel.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/hv_types.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/hv_lp_event.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify reference to iseries/hv_lp_config.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/hv_call_xm.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/hv_call_sc.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-02merge filename and modify references to iseries/hv_call_event.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6Linus Torvalds
2005-11-01Merge branch 'master' of /home/src/linux-2.6/Anton Altaparmakov
2005-11-01NTFS: Fix a stupid bug causing writes to non-initialized pages to segfault.Anton Altaparmakov
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
2005-11-01powerpc: Fix pseries (64-bit) buildPaul Mackerras
A recent commit that removed rtas-fw.h and moved its contents to include/asm-powerpc/rtas.h forgot to also remove the inclusion of it in arch/powerpc/platforms/pseries/setup.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01powerpc: Fix BUG/WARN macros for 64-bitPaul Mackerras
The bug_entry struct had an int in the middle of pointers and unsigned longs, and the inline asm that generated the bug table entries didn't insert the necessary padding, so the fields following it didn't get initialized properly and an oops resulted. This changes the int field (the line number) to a long so that all the fields are the same size and no padding is required. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: Merge bitops.hDavid Gibson
Here's a revised version. This re-introduces the set_bits() function from ppc64, which I removed because I thought it was unused (it exists on no other arch). In fact it is used in the powermac interrupt code (but not on pSeries). - We use LARXL/STCXL macros to generate the right (32 or 64 bit) instructions, similar to LDL/STL from ppc_asm.h, used in fpu.S - ppc32 previously used a full "sync" barrier at the end of test_and_*_bit(), whereas ppc64 used an "isync". The merged version uses "isync", since I believe that's sufficient. - The ppc64 versions of then minix_*() bitmap functions have changed semantics. Previously on ppc64, these functions were big-endian (that is bit 0 was the LSB in the first 64-bit, big-endian word). On ppc32 (and x86, for that matter, they were little-endian. As far as I can tell, the big-endian usage was simply wrong - I guess no-one ever tried to use minixfs on ppc64. - On ppc32 find_next_bit() and find_next_zero_bit() are no longer inline (they were already out-of-line on ppc64). - For ppc64, sched_find_first_bit() has moved from mmu_context.h to the merged bitops. What it was doing in mmu_context.h in the first place, I have no idea. - The fls() function is now implemented using the cntlzw instruction on ppc64, instead of generic_fls(), as it already was on ppc32. - For ARCH=ppc, this patch requires adding arch/powerpc/lib to the arch/ppc/Makefile. This in turn requires some changes to arch/powerpc/lib/Makefile which didn't correctly handle ARCH=ppc. Built and running on G5. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: Merge ipcbuf.hDavid Gibson
This patch merges ppc32 and ppc64 versions of ipcbuf.h. The merge is essentially trivial, since the structure defined in each version was already identical. Only wrinkle is that the merged version now includes linux/types.h in order to get the fixed width integer types. In fact, the old versions probably should have been including that anyway, since the file uses various __kernel_*_t types. Built and booted on G5, built for 32-bit pmac, but not booted, since the merge tree currently doesn't boot there. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: move arch/ppc64/kernel/bpa* to arch/powerpc/platforms/cellArnd Bergmann
This patch simply moves files over to arch/powerpc without making any changes to them. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: move mmio_nvram.c over to arch/powerpcArnd Bergmann
The nvram code formally known as bpa_nvram.c is rather generic really, so it is quite likely to be useful to future boards not based on cell. This patch puts it into arch/powerpc/sysdev. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: move rtas_fw.c out of platforms/pseriesArnd Bergmann
Cell uses the same code as pSeries for flashing the firmware through rtas, so the implementation should not be part of platforms/pseries. Put it into arch/powerpc/kernel instead. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: create a new arch/powerpc/platforms/cell/smp.cArnd Bergmann
During the conversion to the merge tree, the Cell specific SMP initialization was removed from the pSeries code. This creates a new Cell specific SMP implementation file. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01[PATCH] powerpc: Rename BPA to CellArnd Bergmann
The official name for BPA is now CBEA (Cell Broadband Engine Architecture). This patch renames all occurences of the term BPA to 'Cell' for easier recognition. Signed-off-by: Arnd Bergmann <arndb@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-01merge filename and modify references to iseries/hv_call.hKelly Daly
Signed-off-by: Kelly Daly <kelly@au.ibm.com>
2005-10-31Don't touch USB controller IO registers when they are disabledLinus Torvalds
The USB "handoff" code is an early PCI quirk to make sure we own the USB controller (as opposed to the BIOS/SMM). But if the controller isn't even enabled yet, don't try to access it. Acked-by: Paul Mackerras <paulus@samba.org> (who had an alternate patch) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-01powerpc: clean up uaccess.hStephen Rothwell
Use the best from each architecture. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-11-01powerpc: use asm-generic/termios.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 20:05:12 +0000