aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-08-30[PATCH] Make MODULE_DEVICE_TABLE work for vio devicesStephen Rothwell
Make MODULE_DEVICE_TABLE work for vio devices. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Create vio_bus_opsStephen Rothwell
Create vio_bus_ops so that we just pass a structure to vio_bus_init instead of three separate function pointers. Rearrange vio.h to avoid forward references. vio.h only needs struct device_node from prom.h so remove the include and just declare it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Create vio_register_deviceStephen Rothwell
Take some assignments out of vio_register_device_common and rename it to vio_register_device. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Formatting changes to vio.cStephen Rothwell
Formatting changes to vio.c to bring it closer to the kernel coding standard. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] fix iSeries build for gcc-3.4Stephen Rothwell
gcc 3.4 (at least the build we are using) puts the gcc generated .ident string into a .note section at the end of the files it compiles (gcc 3.3.3-hammer and gcc 4.0.2 Debian puts it in the .text section). This means that the lparmap.s file we produce in the iSeries build may end with a .note section. When we include it into head.S, the assembler can no longer resolve some of the conditional branches since the target label ends up too far away. This patch just forces us back to the .text section after including lparmap.s. The breakage was caused by my patch "iSeries build with newer assemblers and compilers" (sha1-id: 2ad56496627630ebc99f06af5f81ca23e17e014e). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Restore lparmap.s include for iSeriesDavid Gibson
A mistake rebasing the series of ppc64 head.S cleanup patches meant the #include of lparmap.s, needed for iSeries was lost. This patch puts it back again. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] ppc64: four level pagetables fixAndrew Morton
With CONFIG_HUGETLB_PAGE=n: In file included from kernel/sysctl.c:37: include/linux/hugetlb.h:104:1: warning: "hugetlb_free_pgd_range" redefined In file included from include/linux/mm.h:36, from kernel/sysctl.c:23: include/asm/pgtable.h:492:1: warning: this is the location of the previous definition Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29Merge HEAD from master.kernel.org:/pub/scm/linux/kernel/git/paulus/ppc64-2.6 Linus Torvalds
2005-08-29Merge refs/heads/upstream from ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-08-29Merge /spare/repo/linux-2.6/Jeff Garzik
2005-08-29[SPARC64]: More fully work around Spitfire Errata 51.David S. Miller
It appears that a memory barrier soon after a mispredicted branch, not just in the delay slot, can cause the hang condition of this cpu errata. So move them out-of-line, and explicitly put them into a "branch always, predict taken" delay slot which should fully kill this problem. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[SPARC64]: Make debugging spinlocks usable again.David S. Miller
When the spinlock routines were moved out of line into kernel/spinlock.c this made it so that the debugging spinlocks record lock acquisition program counts in the kernel/spinlock.c functions not in their callers. This makes the debugging info kind of useless. So record the correct caller's program counter and now this feature is useful once more. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[SPARC]: remove use of asm/segment.hKumar Gala
Removed sparc architecture specific users of asm/segment.h and asm-sparc/segment.h itself Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[SPARC64]: remove use of asm/segment.hKumar Gala
Removed sparc64 architecture specific users of asm/segment.h and asm-sparc64/segment.h itself Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[SPARC64]: Revamp Spitfire error trap handling.David S. Miller
Current uncorrectable error handling was poor enough that the processor could just loop taking the same trap over and over again. Fix things up so that we at least get a log message and perhaps even some register state. In the process, much consolidation became possible, particularly with the correctable error handler. Prefix assembler and C function names with "spitfire" to indicate that these are for Ultra-I/II/IIi/IIe only. More work is needed to make these routines robust and featureful to the level of the Ultra-III error handlers. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[SPARC64]: Do not call winfix_dax blindlyDavid S. Miller
Verify we really are taking a data access exception trap, at TL1, from one of the window spill/fill handlers. Else call a new function, data_access_exception_tl1, to log the error. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[SPARC64]: Fix trap state reading for instruction_access_exception.David S. Miller
1) Read ASI_IMMU SFSR not ASI_DMMU. 2) IMMU has no SFAR, read TPC instead 3) Delete old and incorrect comment about the DTLB protection trap having a dependency on the SFSR contents in order to function correctly Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[libata sata_nv] NVIDIA ok'd license change from OSL+GPL to GPLJeff Garzik
2005-08-29[PATCH] missing include in smc-ultraAl Viro
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29[PATCH] missing include in tda80xxAl Viro
Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29[PATCH] mod_devicetable.h fixesAl Viro
* ieee1394_device_id has kernel_ulong_t field after an odd number of __u32 ones. Since mod_devicetable.h is included both from kernel and from host build helper, we may be in trouble if we are building on 32bit host for 64bit target - userland sees unsigned long long, kernel sees unsigned long and while their sizes match, alignments might not. Fixed by forcing alignment. Fortunately, almost nobody else needs that - the rest of such fields is naturally aligned as it is. * of_device_id has void * in it. Host userland helpers need kernel_ulong_t instead, since their void * might have nothing to do with the kernel one. Fixed in the same way it's done for similar problems in pcmcia_device_id (ifdef __KERNEL__). * pcmcia_device_id has the same problem as ieee1394_device_id. Fixed the same way. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29[PATCH] new name for 2.6.14Benjamin LaHaise
We've had Woozy Numbat for a while now. Here's an updated name care of Jeff Garzik and myself. Signed-off-by: Benjamin LaHaise <bcrl@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29Merge HEAD from ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband.git
2005-08-29Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-arm.git Linus Torvalds
2005-08-29Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-mmc.git Linus Torvalds
2005-08-29Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-serial.git Linus Torvalds
2005-08-29Merge HEAD from master.kernel.org:/home/rmk/linux-2.6-ucb.git Linus Torvalds
2005-08-29Merge refs/heads/upstream from ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-08-29Merge refs/heads/upstream from ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-08-29[PATCH] convert signal handling of NODEFER to act like other Unix boxes.Steven Rostedt
It has been reported that the way Linux handles NODEFER for signals is not consistent with the way other Unix boxes handle it. I've written a program to test the behavior of how this flag affects signals and had several reports from people who ran this on various Unix boxes, confirming that Linux seems to be unique on the way this is handled. The way NODEFER affects signals on other Unix boxes is as follows: 1) If NODEFER is set, other signals in sa_mask are still blocked. 2) If NODEFER is set and the signal is in sa_mask, then the signal is still blocked. (Note: this is the behavior of all tested but Linux _and_ NetBSD 2.0 *). The way NODEFER affects signals on Linux: 1) If NODEFER is set, other signals are _not_ blocked regardless of sa_mask (Even NetBSD doesn't do this). 2) If NODEFER is set and the signal is in sa_mask, then the signal being handled is not blocked. The patch converts signal handling in all current Linux architectures to the way most Unix boxes work. Unix boxes that were tested: DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU 3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX. * NetBSD was the only other Unix to behave like Linux on point #2. The main concern was brought up by point #1 which even NetBSD isn't like Linux. So with this patch, we leave NetBSD as the lonely one that behaves differently here with #2. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-29[PATCH] Dynamic hugepage addresses for ppc64David Gibson
Paulus, I think this is now a reasonable candidate for the post-2.6.13 queue. Relax address restrictions for hugepages on ppc64 Presently, 64-bit applications on ppc64 may only use hugepages in the address region from 1-1.5T. Furthermore, if hugepages are enabled in the kernel config, they may only use hugepages and never normal pages in this area. This patch relaxes this restriction, allowing any address to be used with hugepages, but with a 1TB granularity. That is if you map a hugepage anywhere in the region 1TB-2TB, that entire area will be reserved exclusively for hugepages for the remainder of the process's lifetime. This works analagously to hugepages in 32-bit applications, where hugepages can be mapped anywhere, but with 256MB (mmu segment) granularity. This patch applies on top of the four level pagetable patch (http://patchwork.ozlabs.org/linuxppc64/patch?id=1936). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Check of_chosen in check_for_initrd()Michael Ellerman
You can't call get_property() on a NULL node, so check if of_chosen is set in check_for_initrd(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> arch/ppc64/kernel/setup.c | 20 ++++++++++++-------- 1 files changed, 12 insertions(+), 8 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: unflatten_device_tree() should check if lmb_alloc() failsMichael Ellerman
unflatten_device_tree() doesn't check if lmb_alloc() succeeds or not, it should. All it can do is panic, but at least there's an error message (assuming you have some sort of console at that point). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> arch/ppc64/kernel/prom.c | 9 +++++++-- 1 files changed, 7 insertions(+), 2 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Fix a misleading printk in unflatten_dt_node()Michael Ellerman
When unflatten_dt_node() fails to find an OF_DT_END_NODE tag it prints "Weird tag at start of node", this should be "Weird tag at end of node". Signed-off-by: Michael Ellerman <michael@ellerman.id.au> arch/ppc64/kernel/prom.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Move ppc64_enable_pmcs() logic into a ppc_md functionMichael Ellerman
This patch moves power4_enable_pmcs() to arch/ppc64/kernel/pmc.c. I've tested it on P5 LPAR and P4. It does what it used to. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: allow xmon=offOlaf Hering
If both CONFIG_XMON and CONFIG_XMON_DEFAULT is enabled in the .config, there is no way to disable xmon again. setup_system calls first xmon_init, later parse_early_param. So a new 'xmon=off' cmdline option will do the right thing. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Remove CONFIG_MSCHUNKSMichael Ellerman
We can now remove CONFIG_MSCHUNKS as it doesn't do anything interesting anymore. The only macro in abs_addr.h which is called by non-iSeries code is phys_to_abs(), so remove the other dummy implementations, and we add a firmware feature check to phys_to_abs(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Simplify some lmb functionsMichael Ellerman
lmb_phys_mem_size() can always return lmb.memory.size, as long as it's called after lmb_analyze(), which it is. There's no need to recalculate the size on every call. lmb_analyze() was calculating a few things we then threw away, so just don't calculate them to start with. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Remove physbase from the lmb_property structMichael Ellerman
We no longer need the lmb code to know about abs and phys addresses, so remove the physbase variable from the lmb_property struct. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Remove redundant abs_to_phys() macroMichael Ellerman
abs_to_phys() is a macro that turns out to do nothing, and also has the unfortunate property that it's not the inverse of phys_to_abs() on iSeries. The following is for my benefit as much as everyone else. With CONFIG_MSCHUNKS enabled, the lmb code is changed such that it keeps a physbase variable for each lmb region. This is used to take the possibly discontiguous lmb regions and present them as a contiguous address space beginning from zero. In this context each lmb region's base address is its "absolute" base address, and its physbase is it's "physical" address (from Linux's point of view). The abs_to_phys() macro does the mapping from "absolute" to "physical". Note: This is not related to the iSeries mapping of physical to absolute (ie. Hypervisor) addresses which is maintained with the msChunks structure. And the msChunks structure is not controlled via CONFIG_MSCHUNKS. Once upon a time you could compile for non-iSeries with CONFIG_MSCHUNKS enabled. But these days CONFIG_MSCHUNKS depends on CONFIG_PPC_ISERIES, so for non-iSeries code abs_to_phys() is a no-op. On iSeries we always have one lmb region which spans from 0 to systemcfg->physicalMemorySize (arch/ppc64/kernel/iSeries_setup.c line 383). This region has a base (ie. absolute) address of 0, and a physbase address of 0 (as calculated in lmb_analyze() (arch/ppc64/kernel/lmb.c line 144)). On iSeries, abs_to_phys(aa) is defined as lmb_abs_to_phys(aa), which finds the lmb region containing aa (and there's only one, ie. 0), and then does: return lmb.memory.region[0].physbase + (aa - lmb.memory.region[0].base) physbase == base == 0, so you're left with "return aa". So remove abs_to_phys(), and lmb_abs_to_phys() which is the implementation of abs_to_phys() for iSeries. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Remove redundant use of pointers in lmb codeMichael Ellerman
The lmb code is all written to use a pointer to an lmb struct. But it's always the same lmb struct, called "lmb". So we take the address of lmb, call it _lmb and then start using _lmb->foo everywhere, which is silly. This patch removes the _lmb pointers and replaces them with direct references to the one "lmb" struct. We do the same for some _mem and _rsv pointers which point to lmb.memory and lmb.reserved respectively. This patch looks quite busy, but it's basically just: s/_lmb->/lmb./g s/_mem->/lmb.memory./g s/_rsv->/lmb.reserved./g s/_rsv/&lmb.reserved/g s/mem->/lmb.memory./g Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Remove redundant uses of physRpn_to_absRpnMichael Ellerman
physRpn_to_absRpn is a no-op on non-iSeries platforms, remove the two redundant calls. There's only one caller on iSeries so fold the logic in there so we can get rid of it completely. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Consolidate some macrosMichael Ellerman
The only caller of chunk_offset() and abs_chunk() is phys_to_abs(), so fold the former two into the latter. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Rename msChunks structureMichael Ellerman
Rename the msChunks struct to get rid of the StUdlY caps and make it a bit clearer what it's for. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: msChunks cleanupsMichael Ellerman
Chunks are 256KB, so use constants for the size/shift/mask, rather than getting them from the msChunks struct. The iSeries debugger (??) might still need access to the values in the msChunks struct, so we keep them around for now, but set them from the constant values. Replace msChunks_entry typedef with regular u32. Simplify msChunks_alloc() to manipulate klimit directly, rather than via a parameter. Move msChunks_alloc() and msChunks into iSeries_setup.c, as that's where they're used. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: Remove PTRRELOC() from msChunks codeMichael Ellerman
The msChunks code was written to work on pSeries, but now it's only used on iSeries. This means there's no need to do PTRRELOC anymore, so remove it all. A few places were getting "extern reloc_offset()" from abs_addr.h, move it into system.h instead. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: introduce FW_FEATURE_ISERIESStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: make firmware_has_feature() strongerStephen Rothwell
Make firmware_has_feature() evaluate at compile time for the non pSeries case and tidy up code where possible. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: create firmware_has_feature()Stephen Rothwell
Create the firmware_has_feature() inline and move the firmware feature stuff into its own header file. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29[PATCH] ppc64: remove firmware features from cpu_specStephen Rothwell
The firmware_features field of struct cpu_spec should really be a separate variable as the firmware features do not depend on the chip and the bitmask is constructed independently. By removing it, we save 112 bytes from the cpu_specs array and we access the bitmask directly instead of via the cur_cpu_spec pointer. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>