aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-10-06[ALSA] hda/patch_si3054: new codec vendor IDsSasha Khapyorsky
There are additional IDs for Si3054 codec based HDA modems. Most of them were discovered on discuss@linmodems.org list - Thanks to MarvS and all linmodems.org folks. Signed-off-by: Sasha Khapyorsky <sashak@alsa-project.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-06Initial blind fixup for arm for irq changesLinus Torvalds
Untested, but this should fix up the bulk of the totally mechanical issues, and should make the actual detail fixing easier. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Use CONFIG_GENERIC_TIME and define TOD clock source. [PATCH] sysrq: irq change build fix. [S390] irq change build fixes. [S390] cio: 0 is a valid chpid. [S390] monwriter buffer limit. [S390] ap bus poll thread priority.
2006-10-06[PATCH] um: irq changes break buildPekka Enberg
Fixup broken UML build due to 7d12e780e003f93433d49ce78cfedf4b4c52adc5 "IRQ: Maintain regs pointer globally rather than passing to IRQ handlers". Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo "Blaisorblade" Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] knfsd: tidy up up meaning of 'buffer size' in nfsd/sunrpcNeilBrown
There is some confusion about the meaning of 'bufsz' for a sunrpc server. In some cases it is the largest message that can be sent or received. In other cases it is the largest 'payload' that can be included in a NFS message. In either case, it is not possible for both the request and the reply to be this large. One of the request or reply may only be one page long, which fits nicely with NFS. So we remove 'bufsz' and replace it with two numbers: 'max_payload' and 'max_mesg'. Max_payload is the size that the server requests. It is used by the server to check the max size allowed on a particular connection: depending on the protocol a lower limit might be used. max_mesg is the largest single message that can be sent or received. It is calculated as the max_payload, rounded up to a multiple of PAGE_SIZE, and with PAGE_SIZE added to overhead. Only one of the request and reply may be this size. The other must be at most one page. Cc: Greg Banks <gnb@sgi.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] md: fix bug where new drives added to an md array sometimes don't ↵NeilBrown
sync properly This fixes a bug introduced in 2.6.18. If a drive is added to a raid1 using older tools (mdadm-1.x or raidtools) then it will be included in the array without any resync happening. It has been submitted for 2.6.18.1. Signed-off-by: Neil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] mmc: multi sector write transfersPierre Ossman
SD cards extend the protocol by allowing the host to query a card how many blocks were successfully stored on the medium. This allows us to safely write chunks of blocks at once. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] swarm: Actually initialize the IDE driverMaciej W. Rozycki
This is required for the SWARM GenBus IDE interface to be recognized. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] sched: fix a kerneldoc error on is_init()Henne
Fix a kerneldoc warning and reorderd the description for is_init(). Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] MAINTAINERS: take over scx200-* and pc8736* driversJim Cromie
Add MAINTAINERS entries for new scx200_hrt and pc8736x_gpio drivers, and take over maintenance of scx200_gpio, authored by Christer Weinigel (which I've hacked at), who no longer has the hardware. Also take over hwmon/pc87360, authored by Jean Delvare, who's dropped maintenance to dedicate more time to hwmon subsystem. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Christer Weinigel <christer@weinigel.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] Fix typo in "syntax error if percpu macros are incorrectly used" patchJan Blunck
Trivial typo fix in the "syntax error if percpu macros are incorrectly used" patch. I misspelled "identifier" in all places. D'Oh! Thanks to Dirk Mueller to point this out. Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] m68k: dma_alloc_coherent() has gfp_t as the last argumentAl Viro
annotate, fix the bogus argument of vmap() in it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] m68k: fix NBPG defineRoman Zippel
The recent header cleanup removed PAGE_SIZE from the exported information as it depends on the configuration. BTW This has possibly other consequences, as the core dump code is using PAGE_SIZE directly, which may need fixing as well. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] m68k: small system.h cleanupRoman Zippel
avoid unnecessary xchg() use in set_mb() Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] m68k: fix typo in __generic_copy_to_userRoman Zippel
Jump to the correct exit label after exception Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] m68k: cleanup string functionsRoman Zippel
- cleanup asm of string functions - deinline strncat()/strncmp() - provide non-inlined strcpy() Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] provide tickadj defineRoman Zippel
Provide a tickadj compatibility define for archs still using it. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] page fault retry with NOPAGE_REFAULTBenjamin Herrenschmidt
Add a way for a no_page() handler to request a retry of the faulting instruction. It goes back to userland on page faults and just tries again in get_user_pages(). I added a cond_resched() in the loop in that later case. The problem I have with signal and spufs is an actual bug affecting apps and I don't see other ways of fixing it. In addition, we are having issues with infiniband and 64k pages (related to the way the hypervisor deals with some HV cards) that will require us to muck around with the MMU from within the IB driver's no_page() (it's a pSeries specific driver) and return to the caller the same way using NOPAGE_REFAULT. And to add to this, the graphics folks have been following a new approach of memory management that involves transparently swapping objects between video ram and main meory. To do that, they need installing PTEs from a no_page() handler as well and that also requires returning with NOPAGE_REFAULT. (For the later, they are currently using io_remap_pfn_range to install one PTE from no_page() which is a bit racy, we need to add a check for the PTE having already been installed afer taking the lock, but that's ok, they are only at the proof-of-concept stage. I'll send a patch adding a "clean" function to do that, we can use that from spufs too and get rid of the sparsemem hacks we do to create struct page for SPEs. Basically, that provides a generic solution for being able to have no_page() map hardware devices, which is something that I think sound driver folks have been asking for some time too). All of these things depend on having the NOPAGE_REFAULT exit path from no_page() handlers. Signed-off-by: Benjamin Herrenchmidt <benh@kernel.crashing.org> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] slab: reduce numa text sizePekka Enberg
Reduce the NUMA text size of mm/slab.o a little on x86 by using a local variable to store the result of numa_node_id(). text data bss dec hex filename 16858 2584 16 19458 4c02 mm/slab.o (before) 16804 2584 16 19404 4bcc mm/slab.o (after) [akpm@osdl.org: use better names] [pbadari@us.ibm.com: fix that] Cc: Christoph Lameter <christoph@lameter.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] ohci: don't play with IRQ regsDavid Brownell
This is a more correct fix for the way the ohci hcd was referencing pt_regs in the unlink paths. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] irq_reqs: export __irq_regsAndrew Morton
Modules might want this. Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] Fix WARN_ON / WARN_ON_ONCE regressionAndrew Morton
Tim and Ananiev report that the recent WARN_ON_ONCE changes cause increased cache misses with the tbench workload. Apparently due to the access to the newly-added static variable. Rearrange the code so that we don't touch that variable unless the warning is going to trigger. Also rework the logic so that the static variable starts out at zero, so we can move it into bss. It would seem logical to mark the static variable as __read_mostly too. But it would be wrong, because that would put it back into the vmlinux image, and the kernel will never read from this variable in normal operation anyway. Unless the compiler or hardware go and do some prefetching on us? For some reason this patch shrinks softirq.o text by 40 bytes. Cc: Tim Chen <tim.c.chen@intel.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Ananiev, Leonid I" <leonid.i.ananiev@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] kauditd_thread warning fixAndrew Morton
Squash this warning: kernel/audit.c: In function 'kauditd_thread': kernel/audit.c:367: warning: no return statement in function returning non-void We might as test kthread_should_stop(), although it's not very pointful at present. The code which starts this thread looks racy - the kernel could start multiple threads. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[PATCH] i386: irqs build fixAndrew Morton
Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06[S390] Use CONFIG_GENERIC_TIME and define TOD clock source.Martin Schwidefsky
Fix too slow clock by using CONFIG_GENERIC_TIME and adding a clock source for the s390 time-of-day clock. As added benefit we get rid of the s390 specific definition of do_gettimeofday and do_settimeofday. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-06[PATCH] sysrq: irq change build fix.Heiko Carstens
drivers/char/sysrq.c: In function `sysrq_handle_crashdump': drivers/char/sysrq.c:98: warning: implicit declaration of function `get_irq_regs' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-06[S390] irq change build fixes.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-06[S390] cio: 0 is a valid chpid.Cornelia Huck
In order to determine chpid validity, we need to check whether the corresponding path is specified in the pim. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-06[S390] monwriter buffer limit.Melissa Howland
Make max_bufs a global (per linux guest) limit. Signed-off-by: Melissa Howland <melissah@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-06[S390] ap bus poll thread priority.Christian Borntraeger
The ap bus is supposed to have a low priority. We must use 19 instead of -20, which is just the opposite. Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-05[PATCH] powerpc: irq change build breaksOlof Johansson
Fix up some of the buildbreaks from the irq handler changes. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05Merge git://git.infradead.org/~dhowells/irq-2.6Linus Torvalds
* git://git.infradead.org/~dhowells/irq-2.6: IRQ: Maintain regs pointer globally rather than passing to IRQ handlers IRQ: Typedef the IRQ handler function type IRQ: Typedef the IRQ flow handler function type
2006-10-05[PATCH] UDF: Fix mounting read-writePeter Osterlund
The UDF filesystem can't be mounted in read-write mode any more, because of forgotten braces. Signed-off-by: Peter Osterlund <petero2@telia.com> [ Duh! ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05[PATCH] x86-64: Fix compilation without CONFIG_KALLSYMSRandy Dunlap
Include linux/kallsyms.h unconditionally for print_symbol(). Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] i386: fix rwsem build bug on CONFIG_M386=y [PATCH] x86-64: Annotate interrupt frame backlink in interrupt handlers [PATCH] x86-64: Fix FPU corruption [PATCH] x86: Terminate the kernel stacks for the unwinder [PATCH] i386: Fix PCI BIOS config space access [PATCH] x86-64: Calgary IOMMU: print PCI bus numbers in hex [PATCH] x86-64: Calgary IOMMU: Update Jon's contact info [PATCH] x86-64: Calgary IOMMU: Fix off by one when calculating register space location [PATCH] x86-64: Calgary IOMMU: deobfuscate calgary_init [PATCH] i386: Update defconfig [PATCH] x86-64: Update defconfig [ Manually skipped commits that incorrectly ignored AC in kernel space. The alignment fault is defined to only happen for CPL3 anyway - Linus ]
2006-10-05[PATCH] fix qla{2,4} build errorFrederik Deweerdt
commit 0181944fe647cae18d545ac1167df3d15d393701 adds a 'extended_error_logging' global variable to qla2xxx which is defined by qla4xxx too. Trying to build both drivers results in the following error: LD drivers/scsi/built-in.o drivers/scsi/qla4xxx/built-in.o: In function `qla4xxx_slave_configure': drivers/scsi/qla4xxx/ql4_os.c:1433: multiple definition of `extended_error_logging' drivers/scsi/qla2xxx/built-in.o:drivers/scsi/qla2xxx/qla_os.c:2166: first defined here make[2]: *** [drivers/scsi/built-in.o] Error 1 make[1]: *** [drivers/scsi] Error 2 make: *** [drivers] Error 2 The following patch simply adds a qla2_ (qla4_ respectively) prefix to the variable name. Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05[PATCH] i386: fix rwsem build bug on CONFIG_M386=yIngo Molnar
CONFIG_M386 turns on spinlock-based generic rwsems - which surprises the semaphore.S rwsem stubs. Tested both with and without CONFIG_M386. Reported-by: Klaus Knopper <knopper@knopper.net> Triaged-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05[PATCH] x86-64: Annotate interrupt frame backlink in interrupt handlersAndi Kleen
Add correct CFI annotation to the backlink on top of the interrupt stack. Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05[PATCH] x86-64: Fix FPU corruptionAndi Kleen
This reverts an earlier patch that was found to cause FPU state corruption. I think the corruption happens because unlazy_fpu() can cause FPU exceptions and when it happens after the current switch some processing would affect the state in the wrong process. Thanks to Douglas Crosher and Tom Hughes for testing. Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05[PATCH] x86: Terminate the kernel stacks for the unwinderAndi Kleen
Always make sure RIP/EIP is 0 in the registers stored on the top of the stack of a kernel thread. This makes sure the unwinder code won't try a fallback but knows the stack has ended. AK: this patch is a bit mysterious. in theory they should be terminated anyways, but it seems to fix at least one crash. Anyways double termination probably doesn't hurt. Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05[PATCH] i386: Fix PCI BIOS config space accessAndi Kleen
Got broken by a earlier change. Also add a printk when no pci config method could be found. Cc: gregkh@suse.de Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05[PATCH] x86-64: Calgary IOMMU: print PCI bus numbers in hexJon Mason
Make the references to the bus number in hex instead of decimal, as that is the way that lspci prints out the bus numbers. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05[PATCH] x86-64: Calgary IOMMU: Update Jon's contact infoJon Mason
Also add copyright for work done after leaving IBM. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05[PATCH] x86-64: Calgary IOMMU: Fix off by one when calculating register ↵Jon Mason
space location The purpose of the code being modified is to determine the location of the calgary chip address space. This is done by a magical formula of FE0MB-8MB*OneBasedChassisNumber+1MB*(RioNodeId-ChassisBase) to find the offset where BIOS puts it. In this formula, OneBasedChassisNumber corresponds to the NUMA node, and rionodeid is always 2 or 3 depending on which chip in the system it is. The problem was that we had an off by one error that caused us to account some busses to the wrong chip and thus give them the wrong address space. Fixes RH bugzilla #203971. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-bu: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05[PATCH] x86-64: Calgary IOMMU: deobfuscate calgary_initJon Mason
calgary_init's for loop does not correspond to the actual device being checked, which makes its upperbound check for array overflow useless. Changing this to a do-while loop is the correct way of doing this. There should be no possibility of spinning forever in this loop, as pci_get_device states that it will go through all iterations, then return NULL (thus breaking the loop). Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05[PATCH] i386: Update defconfigAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05[PATCH] x86-64: Update defconfigAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05IRQ: Typedef the IRQ handler function typeDavid Howells
Typedef the IRQ handler function type. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1356d1e5fd256997e3d3dce0777ab787d0515c7a commit)
2006-10-05IRQ: Typedef the IRQ flow handler function typeDavid Howells
Typedef the IRQ flow handler function type. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 8e973fbdf5716b93a0a8c0365be33a31ca0fa351 commit)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 00:41:13 +0000