aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2005-05-23[MTD] Fix unregister_mtd_user() public function documentation.Artem B. Bityuckiy
Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Update BAST driver configurationBen Dooks
update the BAST driver config (which already supports the vr1000) to be selected only if the vr1000 has been configured Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Make OTP actually work.Nicolas Pitre
The OTP code is rather broken without this. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Fix node lookupArtem B. Bityuckiy
Look the ref->next_phys field instead of ->next_in_ino to determine if the block has more then one node. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Fix bad block table scan for small page devicesArtem B. Bityuckiy
Scan 1st and 2nd pages of SP devices for BB marker by default. Fix more then one page scanning in create_bbt.c. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Quiet unused variable warningNicolas Pitre
Signed-off-by: Nioclas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Early Manufacturer ID lookupKyungmin Park
Move manufacturer ID search to display correct ID in case of buswidth mismatch. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Add SST 39VF1601 (MPF+) IDBen Dooks
Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Fixup probing logic for single 16bit devicesBen Dooks
The change to the generic probe to look for the smallest width of chip first is causing some problems on boards with a single 16bit device. The problem seems to be the jedec_match() is truncating the device-id read from the table to match against the one read from the hardware, causing a match against the partial id of some chips with 16bit IDs (such as the SST39LF160) This fixes things for my own board, but something may need to be done if the same problem is exhibited for chips with an 8bit ID Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Read only OOB bytes during bad block scanArtem B. Bityuckiy
When scanning NAND for bad blocks, don't read the whole page, read only needed OOB bytes instead. Also check the return code of the nand_read_raw() function. Correctly free the this->bbt array in case of failure. Tested with Large page NAND. Fix debugging message. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Allow operation without bad block tableArtem B. Bityuckiy
Small bugfix. Sometimes it may be handy not to have bbt. So, this->bbt might be NULL. Signed-off-by: Artem B. Bityuckiy <dedekind@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND: Skip bad block table scan on requestThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Use a single config option for write buffer supportAndrew Victor
This patch replaces the current CONFIG_JFFS2_FS_NAND, CONFIG_JFFS2_FS_NOR_ECC and CONFIG_JFFS2_FS_DATAFLASH with a single configuration option - CONFIG_JFFS2_FS_WRITEBUFFER. The only functional change of this patch is that the slower div/mod calculations for SECTOR_ADDR(), PAGE_DIV() and PAGE_MOD() are now always used when CONFIG_JFFS2_FS_WRITEBUFFER is enabled. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Add support for JFFS2-on-Dataflash devices.Andrew Victor
For Dataflash, can_mark_obsolete = false and the NAND write buffering code (wbuf.c) is used. Since the DataFlash chip will automatically erase pages when writing, the cleanmarkers are not needed - so cleanmarker_oob = false and cleanmarker_size = 0 DataFlash page-sizes are not a power of two (they're multiples of 528 bytes). The SECTOR_ADDR macro (added in the previous core patch) is replaced with a (slower) div/mod version if CONFIG_JFFS2_FS_DATAFLASH is selected. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Core changes required to support JFFS2-on-Dataflash devices.Andrew Victor
DataFlash page-sizes are not a power of two (they're multiples of 528 bytes). There are a few places in JFFS2 code where sector_size is used as a bitmask. A new macro (SECTOR_ADDR) was defined to calculate these sector addresses. For non-DataFlash devices, the original (faster) bitmask operation is still used. In scan.c, the EMPTY_SCAN_SIZE was a constant of 1024. Since this could be larger than the sector size of the DataFlash, this is now basically set to MIN(sector_size, 1024). Addition of a jffs2_is_writebuffered() macro. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Unabuse file-f_mode for OTP purposeNicolas Pitre
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] User interface to Protection RegistersNicolas Pitre
This is implemented using a ioctl to switch the MTD char device into one of the different OTP "modes", at which point read/write/seek can operate on the selected OTP area. Also some extra ioctls to query for size and lock protection segments or groups. Some example user space utilities are provided. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Support for protection register support on Intel FLASH chipsNicolas Pitre
This enables support for reading, writing and locking so called "Protection Registers" present on some flash chips. A subset of them are pre-programmed at the factory with a unique set of values. The rest is user-programmable. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Prevent deadlock during write buffer recoveryEstelle Hammache
Prevent deadlock when checking erased block for space allocation during wbuf recovery. Signed-off-by: Estelle Hammache <estelle.hammache@st.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Add OTP basiscNicolas Pitre
add structure definition for OTP region info Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] amd_flash: Fix chip ID clashJonas Holmberg
* Removed table entry for AM29BDS643D, since device ID clashes with AM29DL640G and both chips support CFI. Signed-off-by: Jonas Holmberg <jonas.holmberg@axis.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Remove NAND dependencies for NOR FLASHDavid Woodhouse
make NAND code work on NOR flash again Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip: big endian fix for NFTL devicesThomas Gleixner
Make NFTL devices work on big endian machines. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip code cleanupThomas Gleixner
Remove commented ugliness Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] DiskOnChip use CONFIG_ options instead of random symbolsThomas Gleixner
Using the CONFIG_ options from KConfig seems to work better :8 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Code cleanup Estelle Hammache
Code beautification and block filing correction for optimization. Signed-off-by: Estelle Hammache <estelle.hammache@st.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Fix MTD device probingRussell King
Try larger numbers of chips before smaller numbers of chips across the bus width. This means we'll avoid misdetecting a 2 x16 array as 1 x32 if the high 16-bits happen to read as zeros in the QRY area. Signed-off-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Fix refile of blocks due to write failure. Estelle Hammache
avoid segfault when nextblock was refiled because of a write failure - avoid filing blocks on the clean list when they have wasted space Signed-off-by: Estelle Hammache <estelle.hammache@st.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Fix block refilingEstelle Hammache
- block refiling when writing directly to flash a buffer which is bigger than wbuf - retry cases for flushing wbuf Signed-off-by: Estelle Hammache <estelle.hammache@st.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Fix write buffer retry caseEstelle Hammache
Correction of retry case to avoid silent failure of rmdir when jffs2_wbuf_recover GCs the previous entry (+ corresponding dnode case). Signed-off-by: Estelle Hammache <estelle.hammache@st.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] rtc_from4 error status check, disable virtual erase blocksDavid A. Marlin
Added routine to perform extra error status checks on erase and write failures to determine if errors are correctable. Added option to prevent JFFS2 from using virtual erase blocks. Performed minor cleanup on whitespace and comments. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND Add optional ECC status check callbackDavid A. Marlin
Add optional hardware specific callback routine to perform extra error status checks on erase and write failures for devices with hardware ECC. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Platform RAM DriverBen Dooks
Driver for generic RAM blocks which are exported by an platform_device from the device driver system. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND use symbols instead of literalsDavid A. Marlin
Replace some literals with defined symbols. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND SharpSL fix default partition sizeRichard Purdie
Correct Poodle default partition size Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[JFFS2] Avoid warning for empty filesystemsTodd Poynor
Avoid "Eep. No valid nodes for ino #1" message for just-created filesystem. Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND replace yieldThomas Gleixner
Replace yield by msleep. M.Wilcox stared at it and frowned Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] bast-flash partitions fixupBen Dooks
Ensure the whole device is added if there are no partitions found on the device, so that at least the flash can be read/written. Replace some of the constants with their SZ_xxx counterparts Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] Renesas AG-AND device recoveryDavid A. Marlin
Add routine to perform device recovery (deplete) procedure. Clean up some compiler warnings. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND workaround for AG-AND disturb issue. AG-AND recoveryDavid A. Marlin
Added workaround for Renesas AG-AND chips "disturb" issue for Bad Block Table. Added support for the device recovery command sequence for Renesas AG-AND chips. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] NAND extended commands, badb block table autorefresh David A. Marlin
Added extended commands for AG-AND device and added option for BBT_AUTO_REFRESH. Signed-off-by: David A. Marlin <dmarlin@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] FTL Fix missing pointer assignmentHerbert Valerio Riedel
For the case that mtd partitions are enabled it would cause a 0-pointer dereferencing in mtdpart.c:mtd_erase_callback() Signed-off-by: Herbert Valerio Riedel <hvr@inso.tuwien.ac.at> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-23[MTD] slram driver cleanupJosh Boyer
Add error checks to read/write functions and add an eraseblock size. Makes slram a suitable device for JFFS2. Signed-off-by: Josh Boyer <jdub@us.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2005-05-19[PATCH] prevent NULL mmap in topdown modelLinus Torvalds
Prevent the topdown allocator from allocating mmap areas all the way down to address zero. We still allow a MAP_FIXED mapping of page 0 (needed for various things, ranging from Wine and DOSEMU to people who want to allow speculative loads off a NULL pointer). Tested by Chris Wright. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-18Automatic merge of ↵Linus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6.git/
2005-05-18[PATCH] Avoid console spam with ext3 aborted journal.Stephen Tweedie
Avoid console spam with ext3 aborted journal. ext3 usually reports error conditions that it detects in its environment. But when its journal gets aborted due to such errors, it can sometimes continue to report that condition forever, spamming the console to such an extent that the initial first cause of the journal abort can be lost. When the journal aborts, we put the filesystem into readonly mode. Most subsequent filesystem operations will get rejected immediately by checks for MS_RDONLY either in the filesystem or in the VFS. But some paths do not have such checks --- for example, if we continue to write to a file handle that was opened before the fs went readonly. (We only check for the ROFS condition when the file is first opened.) In these cases, we can continue to generate log errors similar to EXT3-fs error (device $DEV) in start_transaction: Journal has aborted for each subsequent write. There is really no point in generating these errors after the initial error has been fully reported. Specifically, if we're starting a completely new filesystem operation, and the filesystem is *already* readonly (ie. the ext3 layer has already detected and handled the underlying jbd abort), and we see an EROFS error, then there is simply no point in reporting it again. Signed-off-by: Stephen Tweedie <sct@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-18[PATCH] Fix filp being passed through raw ioctl handlerStephen Tweedie
Don't pass meaningless file handles to block device ioctls. The recent raw IO ioctl-passthrough fix started passing the raw file handle into the block device ioctl handler. That's unlikely to be useful, as the file handle is actually open on a character-mode raw device, not a block device, so dereferencing it is not going to yield useful results to a block device ioctl handler. Previously we just passed NULL; also not a value that can usefully be dereferenced, but at least if it does happen, we'll oops instead of silently pretending that the file is a block device, so NULL is the more defensive option here. This patch reverts to that behaviour. Noticed by Al Viro. Signed-off-by: Stephen Tweedie <sct@redhat.com> Acked-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-17[PATCH] Driver Core: remove driver model detach_stateDavid Brownell
The driver model has a "detach_state" mechanism that: - Has never been used by any in-kernel drive; - Is superfluous, since driver remove() methods can do the same thing; - Became buggy when the suspend() parameter changed semantics and type; - Could self-deadlock when called from certain suspend contexts; - Is effectively wasted documentation, object code, and headspace. This removes that "detach_state" mechanism; net code shrink, as well as a per-device saving in the driver model and sysfs. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] Driver Core: pm diagnostics update, check for errorsDavid Brownell
This patch includes various tweaks in the messaging that appears during system pm state transitions: * Warn about certain illegal calls in the device tree, like resuming child before parent or suspending parent before child. This could happen easily enough through sysfs, or in some cases when drivers use device_pm_set_parent(). * Be more consistent about dev_dbg() tracing ... do it for resume() and shutdown() too, and never if the driver doesn't have that method. * Say which type of system sleep state is being entered. Except for the warnings, these only affect debug messaging. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] PCI: add MODALIAS to hotplug event for pci devicesGreg KH
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 10:45:35 +0000