aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (641 commits) Staging: remove sxg driver Staging: remove heci driver Staging: remove at76_usb wireless driver. Staging: rspiusb: remove the driver Staging: meilhaus: remove the drivers Staging: remove me4000 driver. Staging: line6: ffzb returns an unsigned integer Staging: line6: pod.c: style cleanups Staging: iio: introduce missing kfree Staging: dream: introduce missing kfree Staging: comedi: addi-data: NULL dereference of amcc in v_pci_card_list_init() Staging: vt665x: fix built-in compiling Staging: rt3090: enable NATIVE_WPA_SUPPLICANT_SUPPORT option Staging: rt3090: port changes in WPA_MIX_PAIR_CIPHER to rt3090 Staging: rt3090: rename device from raX to wlanX Staging: rt3090: remove possible conflict with rt2860 Staging: rt2860/rt2870/rt3070/rt3090: fix compiler warning on x86_64 Staging: rt2860: add new device ids Staging: rt3090: add device id 1462:891a Staging: asus_oled: Cleaned up checkpatch issues. ...
2009-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pcmcia-2.6: pcmcia: document return value of pcmcia_loop_config pcmcia: dtl1_cs: fix pcmcia_loop_config logic pcmcia: drop non-existant includes pcmcia: disable prefetch/burst for OZ6933 pcmcia: fix incorrect argument order to list_add_tail() pcmcia: drivers/pcmcia/pcmcia_resource.c: Remove unnecessary semicolons pcmcia: Use phys_addr_t for physical addresses pcmcia: drivers/pcmcia: Make static
2009-09-16Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits) PCI hotplug: clean up acpi_run_hpp() PCI hotplug: acpiphp: use generic pci_configure_slot() PCI hotplug: shpchp: use generic pci_configure_slot() PCI hotplug: pciehp: use generic pci_configure_slot() PCI hotplug: add pci_configure_slot() PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation PCI: Clear saved_state after the state has been restored PCI PM: Return error codes from pci_pm_resume() PCI: use dev_printk in quirk messages PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset() PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle PCI Hotplug: acpiphp: find bridges the easy way PCI: pcie portdrv: remove unused variable PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support ACPI PM: Replace wakeup.prepared with reference counter PCI PM: Introduce device flag wakeup_prepared PCI / ACPI PM: Rework some debug messages PCI PM: Simplify PCI wake-up code ... Fixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree scanning having been moved and merged for the 32- and 64-bit cases. The 'needs_freset' initialization added in 6e19314cc ("PCI/powerpc: support PCIe fundamental reset") is now in arch/powerpc/kernel/pci_of_scan.c.
2009-09-16Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix linkage problem with blk_iopoll and !CONFIG_BLOCK
2009-09-16Merge branch 'writeback' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'writeback' of git://git.kernel.dk/linux-2.6-block: writeback: fix possible bdi writeback refcounting problem writeback: Fix bdi use after free in wb_work_complete() writeback: improve scalability of bdi writeback work queues writeback: remove smp_mb(), it's not needed with list_add_tail_rcu() writeback: use schedule_timeout_interruptible() writeback: add comments to bdi_work structure writeback: splice dirty inode entries to default bdi on bdi_destroy() writeback: separate starting of sync vs opportunistic writeback writeback: inline allocation failure handling in bdi_alloc_queue_work() writeback: use RCU to protect bdi_list writeback: only use bdi_writeback_all() for WB_SYNC_NONE writeout fs: Assign bdi in super_block writeback: make wb_writeback() take an argument structure writeback: merely wakeup flusher thread if work allocation fails for WB_SYNC_NONE writeback: get rid of wbc->for_writepages fs: remove bdev->bd_inode_backing_dev_info
2009-09-16writeback: fix possible bdi writeback refcounting problemNick Piggin
wb_clear_pending AFAIKS should not be called after the item has been put on the list, except by the worker threads. It could lead to the situation where the refcount is decremented below 0 and cause lots of problems. Presumably the !wb_has_dirty_io case is not a common one, so it can be discovered when the thread wakes up to check? Also add a comment in bdi_work_clear. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: Fix bdi use after free in wb_work_complete()Nick Piggin
By the time bdi_work_on_stack gets evaluated again in bdi_work_free, it can already have been deallocated and used for something else in the !on stack case, giving a false positive in this test and causing corruption. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: improve scalability of bdi writeback work queuesNick Piggin
If you're going to do an atomic RMW on each list entry, there's not much point in all the RCU complexities of the list walking. This is only going to help the multi-thread case I guess, but it doesn't hurt to do now. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: remove smp_mb(), it's not needed with list_add_tail_rcu()Nick Piggin
list_add_tail_rcu contains required barriers. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: use schedule_timeout_interruptible()Jens Axboe
Gets rid of a manual set_current_state(). Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: add comments to bdi_work structureJens Axboe
And document its retriever, get_next_work_item(). Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: splice dirty inode entries to default bdi on bdi_destroy()Jens Axboe
We cannot safely ensure that the inodes are all gone at this point in time, and we must not destroy this bdi with inodes having off it. So just splice our entries to the default bdi since that one will always persist. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: separate starting of sync vs opportunistic writebackJens Axboe
bdi_start_writeback() is currently split into two paths, one for WB_SYNC_NONE and one for WB_SYNC_ALL. Add bdi_sync_writeback() for WB_SYNC_ALL writeback and let bdi_start_writeback() handle only WB_SYNC_NONE. Push down the writeback_control allocation and only accept the parameters that make sense for each function. This cleans up the API considerably. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: inline allocation failure handling in bdi_alloc_queue_work()Jens Axboe
This gets rid of work == NULL in bdi_queue_work() and puts the OOM handling where it belongs. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: use RCU to protect bdi_listJens Axboe
Now that bdi_writeback_all() no longer handles integrity writeback, it doesn't have to block anymore. This means that we can switch bdi_list reader side protection to RCU. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: only use bdi_writeback_all() for WB_SYNC_NONE writeoutJens Axboe
Data integrity writeback must use bdi_start_writeback() and ensure that wbc->sb and wbc->bdi are set. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16fs: Assign bdi in super_blockJens Axboe
We do this automatically in get_sb_bdev() from the set_bdev_super() callback. Filesystems that have their own private backing_dev_info must assign that in ->fill_super(). Note that ->s_bdi assignment is required for proper writeback! Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: make wb_writeback() take an argument structureJens Axboe
We need to be able to pass in range_cyclic as well, so instead of growing yet another argument, split the arguments into a struct wb_writeback_args structure that we can use internally. Also makes it easier to just copy all members to an on-stack struct, since we can't access work after clearing the pending bit. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: merely wakeup flusher thread if work allocation fails for ↵Christoph Hellwig
WB_SYNC_NONE Since it's an opportunistic writeback and not a data integrity action, don't punt to blocking writeback. Just wakeup the thread and it will flush old data. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16writeback: get rid of wbc->for_writepagesJens Axboe
It's only set, it's never checked. Kill it. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16fs: remove bdev->bd_inode_backing_dev_infoJens Axboe
It has been unused since it was introduced in: commit 520808bf20e90fdbdb320264ba7dd5cf9d47dcac Author: Andrew Morton <akpm@osdl.org> Date: Fri May 21 00:46:17 2004 -0700 [PATCH] block device layer: separate backing_dev_info infrastructure So lets just kill it. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-15block: fix linkage problem with blk_iopoll and !CONFIG_BLOCKJens Axboe
kernel/built-in.o:(.data+0x17b0): undefined reference to `blk_iopoll_enabled' Since the extern declaration makes the compile work, but the actual symbol is missing when block/blk-iopoll.o isn't linked in. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-15slub: Fix build error in kmem_cache_open() with !CONFIG_SLUB_DEBUGIngo Molnar
This build bug: mm/slub.c: In function 'kmem_cache_open': mm/slub.c:2476: error: 'disable_higher_order_debug' undeclared (first use in this function) mm/slub.c:2476: error: (Each undeclared identifier is reported only once mm/slub.c:2476: error: for each function it appears in.) Triggers because there's no !CONFIG_SLUB_DEBUG definition for disable_higher_order_debug. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-09-15Staging: remove sxg driverGreg Kroah-Hartman
Unfortunatly, the upstream company has abandonded development of this driver. So it's best to just remove the driver from the tree. Cc: Christopher Harrer <charrer@alacritech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: remove heci driverGreg Kroah-Hartman
Intel has officially abandoned this project and does not want to maintian it or have it included in the main kernel tree, as no one should use the code, it's not needed anymore. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: remove at76_usb wireless driver.Greg Kroah-Hartman
There is already an in-kernel driver for this hardware (since 2.6.30), at76c50x-usb, and it supports all of the same devices. So this driver can now be deleted. Acked-by: Kalle Valo <kalle.valo@iki.fi> Cc: linux-wireless <linux-wireless@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: rspiusb: remove the driverGreg Kroah-Hartman
No one cares, it's a custom userspace interface, and the code hasn't built in a long time. So remove it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: meilhaus: remove the driversGreg Kroah-Hartman
The comedi drivers should be used instead, no need to have these in here as well. Cc: David Kiliani <mail@davidkiliani.de> Cc: Meilhaus Support <support@meilhaus.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: remove me4000 driver.Greg Kroah-Hartman
The comedi drivers should be used instead, no need to have this driver in the tree duplicating that one. Cc: Wolfgang Beiter <w.beiter@aon.at> Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: line6: ffzb returns an unsigned integerFrederik Deweerdt
find_first_zero_bit returns a positive value, use it accordingly. Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: line6: pod.c: style cleanupsFrederik Deweerdt
Line6 pod.c: Minor style cleanups Signed-off-by: Frederik Deweerdt <frederik.deweerdt@xprog.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: iio: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc or kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk>
2009-09-15Staging: dream: introduce missing kfreeJulia Lawall
Error handling code following a kmalloc or kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk>
2009-09-15Staging: comedi: addi-data: NULL dereference of amcc in v_pci_card_list_init()Roel Kluin
amcc allocation may fail, prevent a NULL dereference. allocation may fail, prevent a dereference. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: vt665x: fix built-in compilingAlexander Beregalov
Fix this build error: undefined reference to "__this_module" Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: rt3090: enable NATIVE_WPA_SUPPLICANT_SUPPORT optionBartlomiej Zolnierkiewicz
Similarly as it has been done in other in-kernel Ralink drivers and in openSUSE's rt3090sta package. Cc: Axel Koellhofer <rain_maker@root-forum.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: rt3090: port changes in WPA_MIX_PAIR_CIPHER to rt3090Axel K
This patch ports a change recently applied to rt2860/rt2870 in order to change handling of WPA1/WPA2 mixed mode to rt3090. Signed-off-by: Axel Koellhofer <rain_maker@root-forum.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: rt3090: rename device from raX to wlanXAxel K
This patch sets "wlan" as the default suffix for naming the device, a change which has also been previously applied to rt2860/rt2870 in staging. Signed-off-by: Axel Koellhofer <rain_maker@root-forum.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: rt3090: remove possible conflict with rt2860Axel K
Both drivers (rt2860 and rt3090) register themselves as "rt2860" on loading the module. In the very rare case of somebody having two cards in his machine, one using rt3090 and the other one using the rt2860 driver, loading both modules would be impossible, the second one will not be loaded as the kernel will tell you that the driver is already registered. This was also present with rt2870/rt3070 (with both driver registering as "rt2870"), but the code has been merged to one driver recently. The follwoing patch fixes this potential problem until merging of rt2860/rt3090 code to a single driver. Signed-off-by: Axel Koellhofer <rain_maker@root-forum.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: rt2860/rt2870/rt3070/rt3090: fix compiler warning on x86_64Axel K
When compiling rt2860/rt2870/rt3070 or rt3090 on x86_64, the following warning is displayed: drivers/staging/rt3090/rt_linux.c: In function 'duplicate_pkt': drivers/staging/rt3090/rt_linux.c:531: warning: passing argument 1 of 'memmove' makes pointer from integer without a cast include2/asm/string_64.h:58: note: expected 'void *' but argument is of type 'sk_buff_data_t' drivers/staging/rt3090/rt_linux.c:533: warning: passing argument 1 of 'memmove' makes pointer from integer without a cast include2/asm/string_64.h:58: note: expected 'void *' but argument is of type 'sk_buff_data_t' The following patch fixes this warning. Credits go to Helmut Schaa <hschaa@suse.de> for his kind advice/help on this patch. Signed-off-by: Axel Koellhofer <rain_maker@root-forum.org> Cc: Helmut Schaa <hschaa@suse.de> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: rt2860: add new device idsAxel K
This patch adds new device IDs to ralink rt2860 driver in linux staging. The device IDs were retrieved from the latest vendor release (version 2.1.2.0). Signed-off-by: Axel Koellhofer <rain_maker@root-forum.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: rt3090: add device id 1462:891aAxel K
This patch adds a new device ID (1462:819a) to ralink rt3090 driver in linux staging. The device ID was retrieved from the latest vendor release (version 2.2.0.0). Signed-off-by: Axel Koellhofer <rain_maker@root-forum.org> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: asus_oled: Cleaned up checkpatch issues.Kevin A. Granade
Signed-off-by: Kevin A. Granade <kevin.granade@gmail.com> Cc: Belisko Marek <marek.belisko@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: rt2860: fix possible NULL dereferencesRoel Kluin
Allocations may fail, prevent NULL dereferences. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: rtl8192e: Drop unnecessary NULL testJulia Lawall
The result of container_of should not be NULL. In particular, in this case the argument to the enclosing function has passed though INIT_WORK, which dereferences it, implying that its container cannot be NULL. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ identifier fn,work,x,fld; type T; expression E1,E2; statement S; @@ static fn(struct work_struct *work) { ... when != work = E1 x = container_of(work,T,fld) ... when != x = E2 - if (x == NULL) S ... } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: vt665x: rename the module binaryGreg Kroah-Hartman
So it doesn't conflict with a mainline kernel driver currently under development. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: cowloop: remove kernel version checksGreg Kroah-Hartman
Now that the code is in the kernel tree, remove the unneeded version checks. Cc: "H.J. Thomassen" <hjt@ATComputing.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: add cowloop to the buildGreg Kroah-Hartman
Now that the code can build, let's add it to the build system. Cc: "H.J. Thomassen" <hjt@ATComputing.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: cowloop: add TODO fileGreg Kroah-Hartman
Add a TODO file with a few things that needs to be fixed up. Cc: "H.J. Thomassen" <hjt@ATComputing.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15Staging: get cowloop to build properlyGreg Kroah-Hartman
There has been some block api changes since the last release of the cowloop code. This patch updates the code to properly build. Cc: "H.J. Thomassen" <hjt@ATComputing.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>