aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-01-21[POWERPC] Separate MPC52xx PSC FIFO registers from rest of PSCJohn Rigby
This is in preparation for the addition of MPC512x PSC support. The main difference in the 512x is in the fifo registers. Signed-off-by: John Rigby <jrigby@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-18[POWERPC] mpc5200: Add generic support for simple MPC5200 based boardsMarian Balakowicz
This patch adds support for 'mpc5200-simple-platform' compatible boards which do not need a platform specific setup. Such boards are supported assuming the following: - GPIO pins are configured by the firmware, - CDM configuration (clocking) is setup correctly by firmware, - if the 'fsl,has-wdt' property is present in one of the gpt nodes, then it is safe to use such gpt to reset the board, - PCI is supported if enabled in the kernel configuration and if there is a PCI bus node defined in the device tree. Signed-off-by: Marian Balakowicz <m8@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-18[POWERPC] mpc5200: Add Promess Motion-PRO DTSMarian Balakowicz
Add device tree source file for Promess Motion-PRO board. Signed-off-by: Marian Balakowicz <m8@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-18[POWERPC] mpc5200: add CM5200 DTSMarian Balakowicz
Add device tree source file for CM5200 board. Signed-off-by: Marian Balakowicz <m8@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-18[POWERPC] mpc5200: Add TQM5200 DTSMarian Balakowicz
Add device tree source file for TQ Components TQM5200 board. Signed-off-by: Marian Balakowicz <m8@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-18[POWERPC] mpc5200: eliminate mpc52xx_*_map_*() functions.Grant Likely
mpc5200 platform code defines a bunch of map functions which duplicate the functionality of of_iomap(). Remove them and use of_iomap() instead. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-18[POWERPC] mpc5200: Add common mpc52xx_setup_pci() routineMarian Balakowicz
This patch moves a generic pci init code from lite5200 platform file to a common mpc52xx_setup_pci() routine and adds additional compatibility property verification. Signed-off-by: Marian Balakowicz <m8@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-18[POWERPC] mpc5200: Add 'fsl,lpb' bus type for localplus busMarian Balakowicz
Define MPC52xx specific device id list, add new 'fsl,lpb' compatible id for LocalPlus Bus. Signed-off-by: Marian Balakowicz <m8@semihalf.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-17Merge branch 'for-2.6.25' of ↵Paul Mackerras
master.kernel.org:/pub/scm/linux/kernel/git/olof/pasemi into for-2.6.25
2008-01-17[POWERPC] Use <linux/of_{platform, device}.h> and not <asm/...> variants.Jon Loeliger
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Check that the syscall table matches the syscall numbersStephen Rothwell
Also check that __NR_syscalls has been updated appropriately. Hopefully this will catch any out of order additions to the table in the future. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Add hugepagesz boot-time parameterJon Tollefson
This adds the hugepagesz boot-time parameter for ppc64. It lets one pick the size for huge pages. The choices available are 64K and 16M when the base page size is 4k. It defaults to 16M (previously the only only choice) if nothing or an invalid choice is specified. Tested 64K huge pages successfully with the libhugetlbfs 1.2. Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] #address-cells & #size-cells properties are not inheritedMark A. Greer
Fix error in booting-without-of.txt that indicates that a node can inherit its #address-cells and #size-cells definitions from its parent's parent. This is not correct. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] therm_adt746x: Eliminate some build warningsStephen Rothwell
We don't care if the device_create_file calls fail, the driver will work just as well without them, so just issue a runtime warning. drivers/macintosh/therm_adt746x.c: In function 'thermostat_init': drivers/macintosh/therm_adt746x.c:615: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_adt746x.c:616: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_adt746x.c:617: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_adt746x.c:618: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_adt746x.c:619: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_adt746x.c:620: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_adt746x.c:621: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_adt746x.c:622: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_adt746x.c:623: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_adt746x.c:625: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] therm_windtunnel: Eliminate some build warningsStephen Rothwell
We don't care if the device_create_file calls fail, the driver will work just as well without them, so just issue a runtime warning. drivers/macintosh/therm_windtunnel.c: In function 'setup_hardware': drivers/macintosh/therm_windtunnel.c:268: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_windtunnel.c:269: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] arch/powerpc/kernel: Use for_each_child_of_nodeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] cell: Use machine_*_initcall() hooks in platform codeGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] powermac: Use machine_*_initcall() hooks in platform codeGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] therm_pm72: Suppress some compile warningsStephen Rothwell
We don't really care if any of these calls to device_create_file fails, so just issue warnings in that case. drivers/macintosh/therm_pm72.c: In function 'init_cpu_state': drivers/macintosh/therm_pm72.c:1185: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1186: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1187: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1188: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1189: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1191: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1192: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1193: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1194: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1195: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c: In function 'init_backside_state': drivers/macintosh/therm_pm72.c:1383: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1384: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c: In function 'init_drives_state': drivers/macintosh/therm_pm72.c:1503: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1504: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c: In function 'init_dimms_state': drivers/macintosh/therm_pm72.c:1625: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c: In function 'init_slots_state': drivers/macintosh/therm_pm72.c:1743: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result drivers/macintosh/therm_pm72.c:1744: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Update .gitignore filesJochen Friedrich
Update .gitignore as needed by dtc addition. Signed-off-by: Jochen Friedrich <jochen@scram.de> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] pci_32.c: Use for_each_child_of_nodeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] eeh.c: Use for_each_child_of_nodeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] iSeries: eliminate pci_dn bussubnoStephen Rothwell
xlate_iomm_address() really wants the ds_addr to pass to the HV, so store that value (instead of the BAR number) when we allocate the device bars. This is not a fast path, so we can look up the device_node property there instead of using the bussubno field of the pci_dn. The other user of iseries_ds_addr() was already scanning the device tree, so looking up a property will not slow it down any more. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] The pci_dn pcidev is only used by EEHStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] The pci_dn class_code is only used by EEHStephen Rothwell
... so move it into the #ifdef CONFIG_EEH section. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] booting-without-of: localbus should not include board nameAnton Vorontsov
Fix documentation once and for ever, because I'm pretty tired of repeating that I am merely following it. ;-) http://ozlabs.org/pipermail/linuxppc-dev/2007-December/048096.html http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046977.html http://ozlabs.org/pipermail/linuxppc-dev/2007-November/046979.html http://ozlabs.org/pipermail/linuxppc-dev/2007-October/044411.html http://ozlabs.org/pipermail/linuxppc-dev/2007-October/044413.html Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Use for_each macros in arch/powerpc/platforms/powermacCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Use for_each macros in arch/powerpc/kernelCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Use for_each macros in arch/powerpc/sysdevCyrill Gorcunov
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Add of_find_matching_node() helper functionGrant Likely
Similar to of_find_compatible_node(), of_find_matching_node() and for_each_matching_node() allow you to iterate over the device tree looking for specific nodes, except that they take of_device_id tables instead of strings. This also moves of_match_node() from driver/of/device.c to driver/of/base.c to colocate it with the of_find_matching_node which depends on it. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17[POWERPC] Kill sparse warning in HPTE_V_COMPARE()Geert Uytterhoeven
Fixes sparse warning: constant 0xffffffffffffff80 is so big it is unsigned long Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-15[POWERPC] pasemi: Move electra-ide to pata_of_platformOlof Johansson
Move electra-ide glue over to the new pata_of_platform framework, and add the quirks needed to that driver. Signed-off-by: Olof Johansson <olof@lixom.net>
2008-01-15libata: pata_of_platform: OF-Platform PATA device driverAnton Vorontsov
This driver nicely wraps around pata_platform library functions, and provides OF platform bus bindings to the PATA devices. Also add || PPC to the PATA_PLATFORM's "depends on" Kconfig entry, needed for PA Semi Electra. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2008-01-15libata: pata_platform: make probe and remove functions device type neutralAnton Vorontsov
Split pata_platform_{probe,remove} into two pieces: 1. pata_platform_{probe,remove} -- platform_device-dependant bits; 2. __ptata_platform_{probe,remove} -- device type neutral bits. This is done to not duplicate code for the OF-platform driver. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2008-01-11Merge branch 'virtex-for-2.6.25' of ↵Josh Boyer
git://git.secretlab.ca/git/linux-2.6-virtex into for-2.6.25
2008-01-09[POWERPC] Xilinx uartlite: Section type fixupsStephen Neuendorffer
All the __devexit functions are now appropriately tagged. This fixes some ppc link warnings. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-09[POWERPC] Xilinx: updated device tree compatibility to match uboot bsp ↵Stephen Neuendorffer
generator. Missed this one in the boot loader before. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-09[POWERPC] Xilinx: Update booting-without-of.Stephen Neuendorffer
This now better describes what the UBoot device tree generator actually does. In particular: 1) Nodes have a label derived from the device name, and a node name derived from a generic version of the device type, e.g. 'ethernet', 'serial', etc. 2) Usage of compound nodes (representing more than one device in the same IP) which actually works. This requires having a valid compatible node, and all the other things that a bus normally has. I've chosen 'xlnx,compound' as the bus name to describe these compound nodes. In addition, I've clarified some of the language relating to how mhs nodes should be represent in the device tree. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-09[POWERPC] Xilinx: Add correct compatible list for device tree bus bindings.Stephen Neuendorffer
Includes both flavors of plb, opb, dcr, and a pseudo 'compound' bus for representing compound peripherals containing more than one logical device. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-09[POWERPC] Xilinx: update compatible list for interrupt controllerStephen Neuendorffer
These values now match what is generated by the uboot BSP generator. Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2008-01-08[POWERPC] 4xx: PCIe: Increase max busses per port to 64Stefan Roese
Because of how big mapping the config space is (1M per bus), we limit how many busses we support for now. In the long run, we could replace that with something akin to kmap_atomic instead. This patch changes the limit from currently 16 to 64. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-08[POWERPC] 4xx: Add 405GPr and 405EP support in boot wrapperMatthias Fuchs
This patch adds support for 405GPr processors with optional new mode strapping. ibm405gp_fixup_clocks() can now be used for 405GP and 405GPr CPUs. This is in preparation of porting the cpci405 platform support from arch/ppc to arch/powerpc. This patch also adds ibm405ep_fixup_clocks() to support 405EP CPUs from the boot wrapper. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-08[POWERPC] 4xx: enable built-in networking for Sequoia defconfigHollis Blanchard
Enable EMAC driver for Sequoia (and while we're in there, disable Macintosh drivers for Sequoia and Bamboo). Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-04[POWERPC] 4xx: Add EMAC support to Kilauea defconfigStefan Roese
Somehow the EMAC support was dropped (or never really added) to the Kilauea defconfig file. This patch finally adds EMAC support. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-01-02[POWERPC] pasemi: Use machine_*_initcall() hooks in platform codeGrant Likely
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Olof Johansson <olof@lixom.net>
2008-01-02[POWERPC] pasemi: Fix NMI handling checkOlof Johansson
The logic that checks to see if a machine check is caused by an NMI will always match when NMI hasn't been initialized, since the mpic routine will return NO_IRQ (and that's what the nmi_virq value is as well). Signed-off-by: Olof Johansson <olof@lixom.net>
2008-01-02[POWERPC] 4xx: typo in calling machine_device_initcall() for Sequoia boardGrant Likely
Fix an obvious typo. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-31Merge branch 'for-2.6.25' of ↵Paul Mackerras
git://git.kernel.org/pub/scm/linux/kernel/git/olof/pasemi
2007-12-31Revert "[POWERPC] Disable PCI IO/Mem on a device when resources can't be ↵Paul Mackerras
allocated" This reverts commit 553aa7659bc0e188348f64e978343ed984eb6e56 at Ben H's request, because it confused IORESOURCE_* flags with command register bits. Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-28[POWERPC] Enable CONFIG_PCI_MSI and CONFIG_MD in pasemi_defconfigOlof Johansson
Enable MSI now that we have an implementation, and enable CONFIG_MD and the raid options by default as well. Signed-off-by: Olof Johansson <olof@lixom.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:44:37 +0000