aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-03-26[NET]: Remove dead net/sched/Makefile entry for sch_hpfq.o.Robert P. J. Day
Remove the worthless net/sched/Makefile entry for the non-existent source file sch_hpfq.c. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-26Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [SUNGEM]: Fix MAC address setting when interface is up. [IPV4] fib_trie: Document locking. [NET]: Correct accept(2) recovery after sock_attach_fd() [PPP]: Don't leak an sk_buff on interface destruction. [NET_SCHED]: Fix ingress locking [NET_SCHED]: cls_basic: fix NULL pointer dereference [DCCP]: make dccp_write_xmit_timer() static again [TG3]: Update version and reldate. [TG3]: Exit irq handler during chip reset. [TG3]: Eliminate the unused TG3_FLAG_SPLIT_MODE flag. [IPV6]: Fix routing round-robin locking. [DECNet] fib: Fix out of bound access of dn_fib_props[] [IPv4] fib: Fix out of bound access of fib_props[] [NET] AX.25 Kconfig and docs updates and fixes [NET]: Fix neighbour destructor handling. [NET]: Fix fib_rules compatibility breakage [SCTP]: Update SCTP Maintainers entry [NET]: remove unused header file: drivers/net/wan/lmc/lmc_media.h
2007-03-26Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] zcrypt: Fix ap_poll_requests counter in lost requests error path. [S390] zcrypt: Fix possible dead lock in AP bus module. [S390] cio: Device status validity. [S390] kprobes: Align probe address. [S390] Fix TCP/UDP pseudo header checksum computation. [S390] dasd: Work around gcc bug.
2007-03-26[SUNGEM]: Fix MAC address setting when interface is up.Ruben Vandeginste
This patch implements set_mac_address for the sungem driver. This allows changing the mac address of the interface, even when the interface is up. Signed-off-by: Ruben Vandeginste <snowbender@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-26Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: fix usb-serial/ftdi build warning USB: fix usb-serial/generic build warning USB: another entry for the quirk list USB: remove duplicated device id in airprime driver USB: omap_udc: workaround dma_free_coherent() bogosity UHCI: Fix problem caused by lack of terminating QH
2007-03-26Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: Fix warning message in PCIE port driver PCI: Stop unhiding the SMBus on Toshiba laptops PCI: Fix up PCI power management doc pci: set pci=bfsort for PowerEdge R900
2007-03-26[PATCH] Add const to pointer qualifiers for __chk_user_ptr and __chk_io_ptr.Russ Cox
Change prototypes for __chk_user_ptr and __chk_io_ptr to take const void* instead of void*, so that code can pass "const void *" to them. (Right now sparse does not warn about passing const void* to void* functions, but that is a separate bug that I believe Josh is working on, and once sparse does check this, the changed prototypes will be necessary.) Signed-off-by: Russ Cox <rsc@swtch.com> Signed-off-by: Josh Triplett <josh@freedesktop.org> Acked-by: Christopher Li <sparse@chrisli.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-26[IPV4] fib_trie: Document locking.Robert Olsson
Paul E. McKenney writes: > Those of use who dive into networking only occasionally would much > appreciate this. ;-) No problem here... Acked-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> (but trivial) Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: make struct v9fs_cached_file_operations static
2007-03-26USB: fix usb-serial/ftdi build warningDavid Brownell
Fix annoying build warning: drivers/usb/serial/ftdi_sio.c:890: warning: enumeration value `FT232RL' not handled in switch Also add logic to detect FT232R chips (version 6.00, usb 2.0 full speed), so that case isn't completely useless. (NOTE: FT232RL and FT232RQ are the same chip in different packages: L is SSOP, Q is QFN.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26USB: fix usb-serial/generic build warningDavid Brownell
Fix annoying build warning when CONFIG_USB_SERIAL_GENERIC is undefined. drivers/usb/serial/generic.c:24: warning: `generic_probe' declared `static' but never defined Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26USB: another entry for the quirk listOliver Neukum
this scanner disconnects upon suspend. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26USB: remove duplicated device id in airprime driverJon K Hellan
Both airprime and option now want to handle vendor ID 0x1410, device ID 0x1100. Airprime calls it 'ExpressCard34 Qualcomm 3G CDMA'. Option calls it 'Novatel Merlin XS620/S640'. Patch attached to remove it from airprime. From: Jon K Hellan <jon.kare.hellan@uninett.no> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26USB: omap_udc: workaround dma_free_coherent() bogosityDavid Brownell
Various fixes to omap_udc, noted with some recent testing: - Cope with some SMP-induced braindamage in ARM's dma_{alloc,free}_coherent() implementation: alloc() can be called with IRQs blocked, but since late last year that's no longer true for free(). This resolves really NASTY problems with logspamming via WARN_ON(), indicating N-page leaks. - Be more correct in handling GET_STATUS request for RECIP_ENDPOINT ... the previous code only handled RECIP_INTERFACE, this version should be correct except for (sigh) bulk/interrupt endpoints. - Provide a better name for the function reporting whether the board has vbus sensing wired up. GET_STATUS requests for endpoint status still acts strangely though, at least given one flakey host doesn't always ack the first DATA packet, then the packet that gets retransmitted doesn't have data! Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26UHCI: Fix problem caused by lack of terminating QHAlan Stern
This patch (as871) fixes a problem introduced by an earlier change. It turns out that some systems really do need to have a terminating skeleton QH present whenever FSBR is on. I don't know any way to tell which systems do need it and which don't; the easiest answer is to have it there always. This fixes the NumLock-hang bug reported by Jiri Slaby. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: ide: use correct IDE error recovery pdc202xx_new: Enable ATAPI DMA ide: cosmetic adaption of drivers/ide/Kconfig concerning SATA ide: fix locking for manual DMA enable/disable ("hdparm -d") ide: revert "ide: fix drive side 80c cable check, take 2" for now
2007-03-26PCI: Fix warning message in PCIE port driverPrarit Bhargava
PCIE error output should conform to vendor_id:device_id. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26PCI: Stop unhiding the SMBus on Toshiba laptopsJean Delvare
It was found that the Toshiba laptops with hidden Intel SMBus have SMM code handling the thermal management which accesses the SMBus. Thus it is not safe to unhide it and let Linux access it. We have to leave the SMBus hidden. SMM is a pain, really. This fixes bugs #6315 and #6395, for good this time. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26PCI: Fix up PCI power management docJonathan Corbet
Update the documentation of PCI power management functions. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26pci: set pci=bfsort for PowerEdge R900Matt Domsch
This patch automatically enables pci=bfsort for the Dell PowerEdge R900. This is necessary to ensure the onboard NICs enumerate in the proper order, similar to the other systems already on the list. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-26[NET]: Correct accept(2) recovery after sock_attach_fd()Alexey Dobriyan
* d_alloc() in sock_attach_fd() fails leaving ->f_dentry of new file NULL * bail out to out_fd label, doing fput()/__fput() on new file * but __fput() assumes valid ->f_dentry and dereferences it Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-26[PATCH] clockevents: remove bad designed sysfs support for nowThomas Gleixner
The current sysfs support of clockevents does not obey the "only one value per file" rule. The real fix is not 2.6.21 material. Therefor remove the sysfs support for now. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-26ide: use correct IDE error recoverySuleiman Souhlal
IDE error recovery is using IDLE IMMEDIATE if the drive is busy or has DRQ set. This violates the ATA spec (can only send IDLE IMMEDIATE when drive is not busy) and really hoses up some drives (modern drives will not be able to recover using this error handling). The correct thing to do is issue a SRST followed by a SET FEATURES command. This is what Western Digital recommends for error recovery and what Western Digital says Windows does.  It also does not violate the ATA spec as far as I can tell. Bart: * port the patch over the current tree * undo the recalibration code removal * send SET FEATURES command after checking for good drive status * don't check whether the current request is of REQ_TYPE_ATA_{CMD,TASK} type because we need to send SET FEATURES before handling any requests * some pre-ATA4 drives require INITIALIZE DEVICE PARAMETERS command before other commands (except IDENTIFY) so send SET FEATURES only if there are no pending drive->special requests * update comments and patch description * any bugs introduced by this patch are mine and not Suleiman's :-) Signed-off-by: Suleiman Souhlal <suleiman@google.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-26pdc202xx_new: Enable ATAPI DMAAlbert Lee
[ bart: the ressurection of 2 years old patch which slipped thru the cracks (thanks to Sergei Shtylyov for finding it) ] These is the patch to turn on pdc202xx_new for ATAPI DMA. When testing, it works fine without the (request_bufflen % 256) workaround as needed in libata. ide-scsi filters out (pc->request_transfer % 1024) and use PIO, so the pdc202xx ATAPI DMA problem is avoid. Both ide-cd and ide-scsi won't hit the ATAPI DMA problem on pdc202xx_new. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-26ide: cosmetic adaption of drivers/ide/Kconfig concerning SATAPatrick Ringl
Since especially Serial ATA has it's own menu point now, I guess we can change the description of the deprecated SATA driver as well, since the new libATA subsystem is not configured through a SCSI low-level driver anymore, but has it's own menu point. From: Patrick Ringl <patrick_@freenet.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-26ide: fix locking for manual DMA enable/disable ("hdparm -d")Bartlomiej Zolnierkiewicz
Since hwif->ide_dma_check and hwif->ide_dma_on never queue any commands (ide_config_drive_speed() sets transfer mode using polling and has no error recovery) we are safe with setting hwgroup->busy for the time while DMA setting for a drive is changed (so it won't race against I/O commands in fly). I audited briefly all ->ide_dma_check/->ide_dma_on/->tuneproc/->speedproc implementations and they all look OK wrt to this change. This patch finally allowed me to close kernel bugzilla bug #8169 (once again thanks to Patrick Horn for reporting the issue & testing patches). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-26ide: revert "ide: fix drive side 80c cable check, take 2" for nowBartlomiej Zolnierkiewicz
"ide: fix drive side 80c cable check, take 2" patch from Tejun Heo (commit fab59375b9543f84d1714f7dd00f5d11e531bd3e) fixed 80c bit test (bit13 of word93) but we also need to fix master/slave IDENTIFY order (slave device should be probed first in order to make it release PDIAG- signal) and we should also check for pre-ATA3 slave devices (which may not release PDIAG- signal). [ Unfortunately the fact that IDE driver doesn't reset devices itself helps only a bit as it seems that some BIOS-es reset ATA devices after programming the chipset, some BIOS-es can be set to not probe/configure selected devices, there may be no BIOS in case of add-on cards etc. ] Since we are quite late in the release cycle and the required changes will affect a lot of systems just revert the fix for now. [ Please also see libata commit f31f0cc2f0b7527072d94d02da332d9bb8d7d94c. ] Thanks goes out to Fernando Mitio Yamada for reporting the problem and patiently testing patches. Acked-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-26[S390] zcrypt: Fix ap_poll_requests counter in lost requests error path.Ralph Wuerthner
In the unlikely event that an AP device lost requests, don't forget to update the ap_poll_requests counter too. Same must happen in case an AP device is removed while there are still outstanding requests. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-03-26[S390] zcrypt: Fix possible dead lock in AP bus module.Ralph Wuerthner
If a AP device is unconfigured __ap_poll_all() will call device_unregister() in software interrupt context which can cause dead locks. To fix this the device will be only marked as unconfigured and the device_unregister() call will be done later by either ap_scan_bus() or ap_queue_message() in process context. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-03-26[S390] cio: Device status validity.Cornelia Huck
Only accumulate device status field in irb if it is valid. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-03-26[S390] kprobes: Align probe address.David Wilder
Running a probe on s390 with a probe address that is not 4 byte aligned results in a Kernel BUG. The problem is that the stura instruction used by swap_instruction requires the destination address to be 4 byte aligned. As stura only writes 4 bytes, aligning to the next 4 byte aligned address results in the breakpoint instruction being stored past the probe address. The fix is to align the address backward (to the previous 4 byte aligned address) and writing the two byte breakpoint instruction in the appropriate bytes. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-03-26[S390] Fix TCP/UDP pseudo header checksum computation.Heiko Carstens
git commit f994aae1bd8e4813d59a2ed64d17585fe42d03fc changed the function declaration of csum_tcpudp_nofold. Argument types were changed from unsigned long to __be32 (unsigned int). Therefore we lost the implicit type conversion that zeroed the upper half of the registers that are used to pass parameters. Since the inline assembly relied on this we ended up adding random values and wrong checksums were created. Showed only up on machines with more than 4GB since gcc produced code where the registers that are used to pass 'saddr' and 'daddr' previously contained addresses before calling this function. Fix this by using 32 bit arithmetics and convert code to C, since gcc produces better code than these hand-optimized versions. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-03-26[S390] dasd: Work around gcc bug.Peter Oberparleiter
gcc incorrectly removes initialization of register 0 in dasd diag inline assembly. Use different register to work around this compiler bug. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-03-269p: make struct v9fs_cached_file_operations staticAdrian Bunk
This patch makes te needlessly global struct v9fs_cached_file_operations static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
2007-03-25[PPP]: Don't leak an sk_buff on interface destruction.G. Liakhovetski
Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[NET_SCHED]: Fix ingress lockingPatrick McHardy
Ingress queueing uses a seperate lock for serializing enqueue operations, but fails to properly protect itself against concurrent changes to the qdisc tree. Use queue_lock for now since the real fix it quite intrusive. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[NET_SCHED]: cls_basic: fix NULL pointer dereferencePatrick McHardy
cls_basic doesn't allocate tp->root before it is linked into the active classifier list, resulting in a NULL pointer dereference when packets hit the classifier before its ->change function is called. Reported by Chris Madden <chris@reflexsecurity.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[DCCP]: make dccp_write_xmit_timer() static againAdrian Bunk
dccp_write_xmit_timer() needlessly became global. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[TG3]: Update version and reldate.Michael Chan
Update version to 3.75. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[TG3]: Exit irq handler during chip reset.Michael Chan
On most tg3 chips, the memory enable bit in the PCI command register gets cleared during chip reset and must be restored before accessing PCI registers using memory cycles. The chip does not generate interrupt during chip reset, but the irq handler can still be called because of irq sharing or irqpoll. Reading a register in the irq handler can cause a master abort in this scenario and may result in a crash on some architectures. Use the TG3_FLAG_CHIP_RESETTING flag to tell the irq handler to exit without touching any registers. The checking of the flag is in the "slow" path of the irq handler and will not affect normal performance. The msi handler is not shared and therefore does not require checking the flag. Thanks to Bernhard Walle <bwalle@suse.de> for reporting the problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[TG3]: Eliminate the unused TG3_FLAG_SPLIT_MODE flag.Michael Chan
This flag to support multiple PCIX split completions was never used because of hardware bugs. This will make room for a new flag. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[IPV6]: Fix routing round-robin locking.David S. Miller
As per RFC2461, section 6.3.6, item #2, when no routers on the matching list are known to be reachable or probably reachable we do round robin on those available routes so that we make sure to probe as many of them as possible to detect when one becomes reachable faster. Each routing table has a rwlock protecting the tree and the linked list of routes at each leaf. The round robin code executes during lookup and thus with the rwlock taken as a reader. A small local spinlock tries to provide protection but this does not work at all for two reasons: 1) The round-robin list manipulation, as coded, goes like this (with read lock held): walk routes finding head and tail spin_lock(); rotate list using head and tail spin_unlock(); While one thread is rotating the list, another thread can end up with stale values of head and tail and then proceed to corrupt the list when it gets the lock. This ends up causing the OOPS in fib6_add() later onthat many people have been hitting. 2) All the other code paths that run with the rwlock held as a reader do not expect the list to change on them, they expect it to remain completely fixed while they hold the lock in that way. So, simply stated, it is impossible to implement this correctly using a manipulation of the list without violating the rwlock locking semantics. Reimplement using a per-fib6_node round-robin pointer. This way we don't need to manipulate the list at all, and since the round-robin pointer can only ever point to real existing entries we don't need to perform any locking on the changing of the round-robin pointer itself. We only need to reset the round-robin pointer to NULL when the entry it is pointing to is removed. The idea is from Thomas Graf and it is very similar to how this was implemented before the advanced router selection code when in. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[DECNet] fib: Fix out of bound access of dn_fib_props[]Thomas Graf
Fixes a typo which caused fib_props[] to have the wrong size and makes sure the value used to index the array which is provided by userspace via netlink is checked to avoid out of bound access. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[IPv4] fib: Fix out of bound access of fib_props[]Thomas Graf
Fixes a typo which caused fib_props[] to have the wrong size and makes sure the value used to index the array which is provided by userspace via netlink is checked to avoid out of bound access. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[NET] AX.25 Kconfig and docs updates and fixesRalf Baechle
o The AX.25 Howto is unmaintained since several years. I've replaced it with a wiki at http://www.linux-ax25.org which provides more uptodate information. o Change default for AX25_DAMA_SLAVE to Y. AX25_DAMA_SLAVE only compiles in support for DAMA but doesn't activate it. I hope this gets Linux distributions to ship their AX.25 kernels with AX25_DAMA_SLAVE enabled. The price for this would be very small. o Delete historic changelog from comments, that's what SCM systems are meant to do. o ---help--- in Kconfig looks so yellingly eye insulting. Use just help. o Rewrite the commented out piece of old Linux 2.4 configuration language to Kconfig for consistency. o Fixup dependencies. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[NET]: Fix neighbour destructor handling.Alexey Kuznetsov
->neigh_destructor() is killed (not used), replaced with ->neigh_cleanup(), which is called when neighbor entry goes to dead state. At this point everything is still valid: neigh->dev, neigh->parms etc. The device should guarantee that dead neighbor entries (neigh->dead != 0) do not get private part initialized, otherwise nobody will cleanup it. I think this is enough for ipoib which is the only user of this thing. Initialization private part of neighbor entries happens in ipib start_xmit routine, which is not reached when device is down. But it would be better to add explicit test for neigh->dead in any case. Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[NET]: Fix fib_rules compatibility breakageThomas Graf
Based upon a patch from Patrick McHardy. The fib_rules netlink attribute policy introduced in 2.6.19 broke userspace compatibilty. When specifying a rule with "from all" or "to all", iproute adds a zero byte long netlink attribute, but the policy requires all addresses to have a size equal to sizeof(struct in_addr)/sizeof(struct in6_addr), resulting in a validation error. Check attribute length of FRA_SRC/FRA_DST in the generic framework by letting the family specific rules implementation provide the length of an address. Report an error if address length is non zero but no address attribute is provided. Fix actual bug by checking address length for non-zero instead of relying on availability of attribute. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[SCTP]: Update SCTP Maintainers entrySridhar Samudrala
Add Vlad Yasevich as the primary maintainer of SCTP and add a link to the project website. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[NET]: remove unused header file: drivers/net/wan/lmc/lmc_media.hRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25Linux 2.6.21-rc5Linus Torvalds
.. hopefully most of the fallout of the timer changes is contained now. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>