aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-12-04sparc,sparc64: unify boot/Sam Ravnborg
Simple unification: o renamed piggyback to *_32.c/*_64.c o copied content of Makefile from sparc64 to sparc and guard it o updated sparc/boot/.gitignore o deleted remaining files in sparc64/boot Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify kernel/Sam Ravnborg
o Move all files from sparc64/kernel/ to sparc/kernel - rename as appropriate o Update sparc/Makefile to the changes o Update sparc/kernel/Makefile to include the sparc64 files NOTE: This commit changes link order on sparc64! Link order had to change for either of sparc32 and sparc64. And assuming sparc64 see more testing than sparc32 change link order on sparc64 where issues will be caught faster. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: prepare kernel/ for unificationSam Ravnborg
o sparc32 files with identical names to sparc64 renamed to <name>_32.S o introduced a few Kconfig helpers to simplify Makefile logic o refactored Makefile to prepare for unification - use obj-$(CONFIG_SPARC32) for sparc32 specific files - use <name>_$(BITS) for files where sparc64 has a _64 variant - sparc64 directly include a few files where sparc32 builds them, refer to these files directly (no BITS) - sneaked in -Werror as used by sparc64 o modified sparc/Makefile to use the new names for head/init_task Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify lib/Sam Ravnborg
o Renamed files in sparc64 to <name>_64.S when identical to sparc32 files. o iomap.c were equal for sparc32 and sparc64 o adjusted sparc/Makefile now we have only one lib/ Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: prepare lib/ for unificationSam Ravnborg
Identical named files renamed to <name>_32.S Refactored Makefile to prepare for unification. Linking order was altered slightly - but this is a lib.a file so it should not matter. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify prom/Sam Ravnborg
- all files with identical names copied and renamed to *_64.c - the remaning files copied as is - added sparc64 specific files to sparc/prom/Makefile - teach sparc64 Makefile to look into sparc/prom/ - delete unused Makefile from sparc64/prom/ linking order was not kept for sparc64 with this change. It was not possible to keep linking order for both sparc and sparc64 and as sparc64 see more testing than sparc it was natural to break linking order on sparc64. Should it have any effect it would be detected sooner this way. printf_32.c and printf_64.c are obvious candidates to be merged but they are not 100% equal so that was left for later Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: prepare prom/ for unificationSam Ravnborg
- rename files where sparc64 uses identical names to *_32.c - refactor Makefile (but keep linking order) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify MakefileSam Ravnborg
To unify Makefile for sparc and sparc64 a few other steps was needed: 1) separate defconfig files for sparc and sparc64 is required, so locate these in arch/sparc/configs 2) removoval of hack in toplevel Makefile to deal with that headers was in a separate directory compared to the rest The unification of the Makefile required usage of several foo-$(CONFIG_SPARCnn) += due to a few directories pending unification. This will be cleaned up when we unify the remaining directories. Included in this patch are the deletion of a few files in sparc64 as they are no longer needed: Makefile + Kconfig. arch/sparc64/ will after this patch is applied only have four directories (prom, lib, kernel, boot) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: gitignore a few filesSam Ravnborg
With this 'git status' no longer reports any new files At least not for a sparc allnoconfig build Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: clean boot/Sam Ravnborg
Leave all cleaning to boot/Makefile and delete zImage too when we do a 'make clean' Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: refactor MakefileSam Ravnborg
The btfixup step needs knowledge of all the .o files, but there is no need to pass them in independent variables. Simplify it to use only two variables. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify asm-offsets.cSam Ravnborg
sparc64 does not use constants generated from asm-offsets but to prepare it to do so the parts that could be shared do now generate constants for sparc64 too. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: use vmlinux.lds.S from sparcSam Ravnborg
Previous commit made them identical so use the sparc version Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: prepare vmlinux.lds.S for unificationSam Ravnborg
This patch makes the two vmlinux.lds.S files identical and serve as documentation for the changes in each file. This mainly add stuffs to sparc32 that is otherwise only used by sparc64 and thus it should have no effect. Build tested only. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Provide oprofile pseudo-NMI on Niagara.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Add performance counter hypervisor calls for sun4v.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Add save_stack_trace_tsk().David S. Miller
And this allows us to indicate HAVE_LATENCYTOP_SUPPORT. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc32: pdev_to_pnode() is used from __devinitAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc32: Don't btfixup cache flush ops for viking multiple times.David S. Miller
Just do it once. Pointed out by Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: combine unistd_{32,64}.hStephen Rothwell
This is complicated a little because compat_audit.c wants to see only the 32bit syscall numbers, but is being built in a 64bit compile. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Use NMI oprofile profiling on cheetah and derivative cpus.David S. Miller
We use clock cycle counter, adjusted to HZ. This can be extended to sun4v based processors as well, as they also have a proper overflow interrupt facility for the performance counters. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Add write_pic() helper.David S. Miller
It writes the %pic register, keeping mind of processor bugs. Implement reset_pic() in terms of it. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Block NMIs in critical section of context switch.David S. Miller
In these instructions we load the new thread register, switch the register window, and setup the new frame pointer. All of these must appear atomic, and things will explode if we take a PIL=15 NMI interrupt in the middle of this sequence. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Make special trap return path for TRAP_NMI().David S. Miller
We don't want the rtrap path to try and run softirqs or anything like that when returning from a PIL==15 NMI. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Make %pil level 15 a pseudo-NMI.David S. Miller
So that we can profile code even in a local_irq_disable() section, only write 14 (instead of 15) into the %pil register to disable IRQs. This allows PIL level 15 to serve as a pseudo NMI. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: Include drivers/pcmcia/KconfigDavid S. Miller
Stephen Rothwell pointed out that pcmcia can't be enabled on sparc64. There is an empty non-prompt PCMCIA explicit entry in arch/sparc/Kconfig but that doesn't do anything. 32-bit sparc needs a small hack to make this work, since it doesn't use the generic IRQ layer yes. We have to provide a dummy definition of probe_irq_mask(), since this is used by the yenta socket driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Add interface for registering a performance counter IRQ handler.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Add tsb-ratio sysctl.David S. Miller
Add a sysctl to tweak the RSS limit used to decide when to grow the TSB for an address space. In order to avoid expensive divides and multiplies only simply positive and negative powers of two are supported. The function computed takes the number of TSB translations that will fit at one time in the TSB of a given size, and either adds or subtracts a percentage of entries. This final value is the RSS limit. See tsb_size_to_rss_limit(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify mm/Sam Ravnborg
- move all sparc64/mm/ files to arch/sparc/mm/ - commonly named files are named _64.c - add files to sparc/mm/Makefile preserving link order - delete now unused sparc64/mm/Makefile - sparc64 now finds mm/ in sparc Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: prepare mm/ for unificationSam Ravnborg
- rename files where sparc64 has similar files to _32.c - Restructure Makefile - Sneak in -Werror as we have for sparc64 Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: unify arch/sparc64/oprofile/Sam Ravnborg
A simple: diff arch/sparc64/oprofile/init.c arch/sparc/oprofile/init.c diff arch/sparc64/oprofile/Makefile arch/sparc/oprofile/Makefile revealed that the directories were equal. So let sparc64 point to the sparc version and drop the sparc64 oprofile dir Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: unify math-emuSam Ravnborg
Move relavent files to sparc/math-emu and adjust path/include accordingly. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: prepare math-emu for unificationSam Ravnborg
Add _32 to filenames to make them 32 bit unique Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: cleanup math-emuSam Ravnborg
- Drop unused assignment from Makefile - Replace EXTRA_CFLAGS with ccflags-y - Delete unused file Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: add BITS to arch MakefileSam Ravnborg
BITS will be used to simplify unified Makefiles Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc,sparc64: unify Kconfig filesSam Ravnborg
Merge all of sparc64 Kconfig to sparc Kconfig. The merge was checked by: - visual inspection in menuconfig - result of allnoconfig, allmodconfig, allyesconfig was checked before and after - result of a number of randconfig was checked before and after scripts/diffconfig was used to check if the config differed before and after The validity of the test was checked by on purpose introducing a few bugs - and they were all caught by first run. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: add "Bus options" to KconfigSam Ravnborg
To align with sparc64 add a "Bus options" menu This has the additiona advantage that all bus options are kept together Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: add menu "Executable file formats"Sam Ravnborg
This is what we use in sparc64 - make sparc equal Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: use Kconfig.hzSam Ravnborg
We already has the proper definition in place in param.h. So use the common Kconfig.hz file Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: drop UNIX98_PTYS from arch KconfigSam Ravnborg
We have it in drivers/char/Kconfig There is no need to ask twice Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: added more config options to the menusSam Ravnborg
moved a few config entries inside a menu so we do not clutter the first screen up with a lot of detailed config options. The structure now remotely resemble the structure for i386 Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: refactor Kconfig a littleSam Ravnborg
Mode declaration of SPARC up in the top to match the structure of sparc64 Kconfig Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc: unify Kconfig.debugSam Ravnborg
Let sparc and sparc64 use the same Kconfig.debug Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Stop using memory barriers for atomics and locks.David S. Miller
The kernel always executes in the TSO memory model now, so none of this stuff is necessary any more. With helpful feedback from Nick Piggin. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Run the kernel always in the TSO memory model.David S. Miller
The fact of the matter is, all UltraSPARC-III and later chips only implement TSO. They don't implement PSO and RMO memory models at all. Only the Ultra-I and Ultra-II family chips implement RMO and they are only helped marginally by using this setting when executing kernel code. The big plus to doing this is that we can eliminate all of the non-Sync memory barriers in the kernel except for the ones used in the optimized memcpy/memset code (these use block load and store operations which have their own memory ordering rules). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04of: Fix comment, sparc no longer uses of_device objects on special busses.David S. Miller
It only uses of_platform_bus_type. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04sparc64: Rework auxio driver to save some text space.David S. Miller
Use common functions instead of inlining and duplicating logic over and over to handle the SBUS vs. EBUS cases. Before: text data bss dec hex filename 715 568 16 1299 513 arch/sparc64/kernel/auxio.o After: text data bss dec hex filename 631 568 16 1215 4bf arch/sparc64/kernel/auxio.o Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-04Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
2008-12-04sparc64: Sync FPU state in VIS emulation handler.Hong H. Pham
Copy the FPU state to the task's thread_info->fpregs for the VIS emulation functions to access. Signed-off-by: Hong H. Pham <hong.pham@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03sparc64: Fix VIS emulation bugsJoseph Myers
This patch fixes some bugs in VIS emulation that cause the GCC test failure FAIL: gcc.target/sparc/pdist-3.c execution test for both 32-bit and 64-bit testing on hardware lacking these instructions. The emulation code for the pdist instruction uses RS1(insn) for both source registers rs1 and rs2, which is obviously wrong and leads to the instruction doing nothing (the observed problem), and further inspection of the code shows that RS1 uses a shift of 24 and RD a shift of 25, which clearly cannot both be right; examining SPARC documentation indicates the correct shift for RS1 is 14. This patch fixes the bug if single-stepping over the affected instruction in the debugger, but not if the testcase is run standalone. For that, Wind River has another patch I hope they will send as a followup to this patch submission. Signed-off-by: Joseph Myers <joseph@codesourcery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-06 21:38:54 +0000