| Age | Commit message (Collapse) | Author |
|---|
|
cpu_vm_mask is of type cpumask_t, so use the proper bitops.
Signed-off-by: Brian Gerst <bgerst@didntduck.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This fixes problems with very large nodes (over 128GB) filling up all of
the first 4GB with their mem_map and not leaving enough space for the
swiotlb.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This means i386 processes compiled with a recent compiler will get non
executable heap by default now. This is the same default as a 32bit PAE
kernel would use on a NX enabled CPU.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This reorders the mmu_state int in the pda, such that there is no more
padding (there currently is 4 bytes of padding). Boot tested.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Because 256 causes overflows in some code that stores them in 8 bit
fields and the x86 APIC architecture cannot handle more than 255
anyways.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
When x86_64 timer init messages were changed to use apic verbosity
levels, two messages were missed and one got the wrong level. This
causes the last word of a suppressed message to print on a line by
itself. Fix that so either the entire message prints or none of it
does.
Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Only log data in microcode driver when something is changed Otherwise it
was far too noisy on large systems.
Also remove the printk when it is unloaded.
Cc: tigran@veritas.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch puts the infrastructure in place to allow for a reordering of
functions based inside the vmlinux. The general idea is that it is possible
to put all "common" functions into the first 2Mb of the code, so that they
are covered by one TLB entry. This as opposed to the current situation where
a typical vmlinux covers about 3.5Mb (on x86-64) and thus 2 TLB entries.
This is done by enabling the -ffunction-sections flag in gcc, which puts
each function in its own ELF section, so that the linker can then order them
in a way defined by the linker script.
As per previous discussions, Linus said he wanted a "static" list for this,
eg a list provided by the kernel tarbal, so that most people have the same
ordering at least. A script is provided to create this list based on
readprofile(1) output. The included list is provisional, and entirely biased
on my own testbox and me running a few kernel compiles and some other
things.
I think that to get to a better list we need to invite people to submit
their own profiles, and somehow add those all up and base the final list on
that. I'm willing to do that effort if this is ends up being the prefered
approach. Such an effort probably needs to be repeated like once a year or
so to adopt to the changing nature of the kernel.
Made it a CONFIG with default n because it increases link times
dramatically.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
I tested it on a couple of chipsets and it worked everywhere so it
should be ok as default for now.
So far I haven't done the great purge of the useless old check_timer
code yet though.
Can be overwritten with enable_8254_timer in the worst case
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
There is a fallback logic, so it's better to not use the OOM killer
in the allocations.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Floppy can fall back to smaller buffers, so don't do OOM killing.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Was disabled due to an old bug, long gone.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Only white space changes, code should be identical
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
ACPIv2 has an official but optional way to get a date >2100. Use it.
But all the platforms I tested didn't seem to support it. But anyways
the x86-64 kernel should be ready for the 22nd century now. Actually i
shouldn't care about this because I will be dead by then @)
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This patch puts the code from head.S in a special .bootstrap.text
section.
I'm working on a patch to reorder the functions in the kernel (I'll post
that later), but for x86-64 at least the kernel bootstrap requires that
the head.S functions are on the very first page/pages of the kernel
text. This is understandable since the bootstrap is complex enough
already and not a problem at all, it just means they aren't allowed to
be reordered. This patch puts these special functions into a separate
section to document this, and to guarantee this in the light of possibly
reordering the rest later.
(So this patch doesn't fix a bug per se, but makes things more robust by
making the order of these functions explicit)
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
There are more and more cases where we need to know DMI information
early to work around bugs. i386 already had early DMI scanning, but
x86-64 didn't. Implement this now.
This required some cleanup in the i386 code.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
- Move the core parser into dmi_scan.c. It can be useful for other
subsystems too.
- Differentiate between field doesn't exist and field is 0 or
unparseable. The first case is likely an old BIOS with broken ACPI,
the later is likely a slightly buggy BIOS where someone forget to
edit the date. Don't blacklist in the later case.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
s/Overwrite/Override/
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
As suggested by Andi (and Alan), move the default kernel location
from 1Mb to 2Mb, to align to the start of a TLB entry.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
In a micro-benchmark that stresses the pagefault path, the down_read_trylock
on the mmap_sem showed up quite high on the profile. Turns out this lock is
bouncing between cpus quite a bit and thus is cache-cold a lot. This patch
prefetches the lock (for write) as early as possible (and before some other
somewhat expensive operations). With this patch, the down_read_trylock
basically fell out of the top of profile.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Not for the ioctls so far because I was too lazy.
Cc: bcollins@debian.org
Cc: dan@dennedy.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
phys_proc_id[] on AMD boxes is right now populated with the initial
apic id, obtained by the cpuid instruction. But, the initial apic id
need not be the local apic id on clustered APIC systems (see comment at
x86_64/kernel/genapic_cluster.c, line 110). On vSMPowered with AMD
CPUs the cpu_to_node will turn out to be incorrect (as apicid_to_node[] is
indexed by the initial apic id rather than the local apic id).
On vSMPowered boxes with Intel CPUs this is working correctly as
phys_proc_id[] is initialized correctly in detect_ht().
This fixes AMD boot path according to specification, to use the correct
routines for local apic id and socket ids. We use
hard_smp_processor_id() to read the local apic id, and phys_pkg_id() to
determine socket id for phys_proc_id[]
Patch tested on Tyan multicore boxes as well as vSMPowered boxes.
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
- adjust limits of GDT/IDT pseudo-descriptors (some were off by one)
- move empty_zero_page into .bss.page_aligned
- move cpu_gdt_table into .data.page_aligned
- move idt_table into .bss
- align inital_code and init_rsp
- eliminate pointless (re-)declaration of idt_table in traps.c
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
It needs num_physpages, so initialize it early. It's later overwritten
again.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Attached is a small code style cleanup patch that resulted from my
skimming through the arch/x86_64/kernel/traps.c code to figure out what
went haywire.
Signed-off-by: Roberto Nibali <ratz@drugphish.ch>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
[description by AK]
Made a cut'n'paste error when adding the entry for the ALI M1695
AGP bridge and added a second entry for the 1689
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
gcc should handle this anyways, and it causes problems when
sprintf is turned into strcpy by gcc behind our backs and
the C fallback version of strcpy is actually defining __builtin_strcpy
Then drop -ffreestanding from the main Makefile because it isn't
needed anymore and implies -fno-builtin, which is wrong now.
(it was only added for x86-64, so dropping it should be safe)
Noticed by Roman Zippel
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
We've always had the problem that arguments only did a prefix match,
which resulted e.g. in noapic and noapictimer getting confused.
Fix the early argument parsing code to always check that arguments are
whole words (except for those that take additional arguments of course)
I factored out the checking code for that while also makes the code
easier to maintain.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Appearantly a left-over...
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
callbacks
While the modular aspect of the respective i386 patch doesn't apply to
x86-64 (as the top level page directory entry is shared between modules
and the base kernel), handlers registered with register_die_notifier()
are still under similar constraints for touching ioremap()ed or
vmalloc()ed memory. The likelihood of this problem becoming visible is
of course significantly lower, as the assigned virtual addresses would
have to cross a 2**39 byte boundary. This is because the callback gets
invoked
(a) in the page fault path before the top level page table propagation
gets carried out (hence a fault to propagate the top level page table
entry/entries mapping to module's code/data would nest infinitly) and
(b) in the NMI path, where nested faults must absolutely not happen,
since otherwise the IRET from the nested fault re-enables NMIs,
potentially resulting in nested NMI occurences.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The code waits for the GART to clear the TLB flush bit. Use cpu_relax
in this time to allow hypervisors to yield the CPU in this time.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Makes some debugging easier.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The PM timer path through main_timer_handler doesn't need
the delay variable because it figures it out in a different way.
Don't try to read it from the PIT. With stopped PIT timer
it is even useless.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Minor cleanup to lend better for physical CPU hotplug.
Earlier way of using num_processors as index doesnt
fit if CPUs come and go. This makes the code little bit better
to read, and helps physical hotplug use the same functions as boot.
Reserving CPU0 for BSP is too late to be done in smp_prepare_boot_cpu().
Since logical assignments from MADT is already done via
setup_arch()->acpi_boot_init()->parse lapic
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Touching of the floating point state in a kernel debugger must be
NMI-safe, specifically math_state_restore() must be able to deal with
being called out of an NMI context. In order to do that reliably, the
context switch code must take care to not leave a window open where
the current task's TS_USEDFPU flag and CR0.TS could get out of sync.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
For consistency and to have only a single place of definition, replace
set_debug() uses with set_debugreg(), and eliminate the definition of
thj former.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
While AMD formally permits multi-byte execution breakpoints, Intel
disallows 8-byte as much as 2- or 4-byte ones.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Fix one place where the previous change of cpu_pda from being an array
to being a macro was not properly carried out.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
It conflicts with the struct node in node.h
Actually the x86-64 version was there first, but ..
Suggested by Jan Beulich
Cc: jbeulich@novell.com
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
architectures
8MB is not really very random, use 1GB (or more with larger page sizes)
instead.
Also use the low bits of the random generator output now instead of
throwing them away.
Only enabled on x86-64 right now. Other architectures need to add
a suitable STACK_RND_MASK
Cc: mingo@elte.hu
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The upcomming gcc 4.2 got a new option -mtune=generic to tune
code for both common AMD and Intel CPUs. Use this option
when available for generic kernels.
On x86-64 it is used with CONFIG_GENERIC_CPU. On i386 it is
enabled with CONFIG_X86_GENERIC. It won't affect the base
line CPU support in any ways and also not the minimum supported CPU.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Memory >39bits has a different PUD.
Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] kzalloc conversion for gx-suspmod
[CPUFREQ] Whitespace cleanup
[CPUFREQ] Mark longhaul driver as broken.
[PATCH] cpufreq: fix section mismatch warnings
[CPUFREQ] Fix the p4-clockmod N60 errata workaround.
[CPUFREQ] Fix handling for CPU hotplug
[CPUFREQ] powernow-k8: Let cpufreq driver handle affected CPUs
[CPUFREQ] Lots of whitespace & CodingStyle cleanup.
[CPUFREQ] Remove duplicate cpuinfo struct
[CPUFREQ] Silence powernow-k8 warning on k7's.
|
|
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IPoIB: P_Key change event handling
IB/mthca: Fix modify QP error path
IPoIB: Fix network interface "RUNNING" status
IB/mthca: Fix indentation
IB/mthca: Fix uninitialized variable in mthca_alloc_qp()
IB/mthca: Check SRQ limit in modify SRQ operation
IB/mthca: Check that SRQ WQE size does not exceed device's max value
IB/mthca: Check that sgid_index and path_mtu are valid in modify_qp
IB/srp: Use a fake scatterlist for non-SG SCSI commands
IPoIB: Pass correct pointer when flushing child interfaces
|
|
* 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2:
ocfs2: finally remove MLF* macros
ocfs2: don't use MLF* in the file system
ocfs2: don't use MLF* in dlm/ files
ocfs2: don't use MLF* in cluster/ files
[PATCH] ocfs2: dlm recovery fixes
[PATCH] ocfs2: fix hang in dlm lock resource mastery
ocfs2: use __attribute__ format
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] New IA64 core/thread detection patch
[IA64] Increase max node count on SN platforms
[IA64] Increase max node count on SN platforms
[IA64] Increase max node count on SN platforms
[IA64] Increase max node count on SN platforms
[IA64] Tollhouse HP: IA64 arch changes
[IA64] cleanup dig_irq_init
[IA64] MCA recovery: kernel context recovery table
IA64: Use early_parm to handle mvec_name and nomca
[IA64] move patchlist and machvec into init section
[IA64] add init declaration - nolwsys
[IA64] add init declaration - gate page functions
[IA64] add init declaration to memory initialization functions
[IA64] add init declaration to cpu initialization functions
[IA64] add __init declaration to mca functions
[IA64] Ignore disabled Local SAPIC Affinity Structure in SRAT
[IA64] sn_check_intr: use ia64_get_irr()
[IA64] fix ia64 is_hugepage_only_range
|
|
* master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild: (46 commits)
kbuild: remove obsoleted scripts/reference_* files
kbuild: fix make help & make *pkg
kconfig: fix time ordering of writes to .kconfig.d and include/linux/autoconf.h
Kconfig: remove the CONFIG_CC_ALIGN_* options
kbuild: add -fverbose-asm to i386 Makefile
kbuild: clean-up genksyms
kbuild: Lindent genksyms.c
kbuild: fix genksyms build error
kbuild: in makefile.txt note that Makefile is preferred name for kbuild files
kbuild: replace PHONY with FORCE
kbuild: Fix bug in crc symbol generating of kernel and modules
kbuild: change kbuild to not rely on incorrect GNU make behavior
kbuild: when warning symbols exported twice now tell user this is the problem
kbuild: fix make dir/file.xx when asm symlink is missing
kbuild: in the section mismatch check try harder to find symbols
kbuild: fix section mismatch check for unwind on IA64
kbuild: kill false positives from section mismatch warnings for powerpc
kbuild: kill trailing whitespace in modpost & friends
kbuild: small update of allnoconfig description
kbuild: make namespace.pl CROSS_COMPILE happy
...
Trivial conflict in arch/ppc/boot/Makefile manually fixed up
|
