aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-06-14rndis_wlan: use kzalloc to allocate private dataJussi Kivilinna
rndis_wlan used kmalloc to allocate private data structure and leaving data uninitialized, but later assumed to be set zero. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14mac80211: do not fragment while aggregation is in useRon Rindjunsky
This patch denies the use of framentation while ampdu is used. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: remove iwlcore_low_level_notifyEmmanuel Grumbach
This patch removes the iwlcore_low_level_notify. The notification chain is not required in this level. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: general code clean upEmmanuel Grumbach
This patch cleans up iwlwifi's code: Add missing include, remove empty lines etc... Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: fix software rf_kill problem when interface is downZhu Yi
The patch fixes the problem that software rf_kill messes up the card status when it is disabled if the interface is down. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: remove dead code iwl4965_calc_db_from_ratioEmmanuel Grumbach
This patch removes iwl4965_calc_db_from_ratio which is dead code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: retfactor get_temperature functionsEmmanuel Grumbach
This patch renames iwl4965_get_tempearture to iwl4965_hw_get_temperature and replaces usage of original iwl4965_hw_get_temperature by direct access to priv->temperature. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: move iwl4965_rf_kill_ct_config to iwl-core.cEmmanuel Grumbach
This patch moves iwl4965_rf_kill_ct_config to iwl-core.c. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: cleans up scanning codeTomas Winkler
This patch 1. cleans up scanning code. 2. It adds round robin of TX antannas/chains. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: move rate helpers to iwlcoreTomas Winkler
This patch moves rate helpers to iwlcore. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: move scan to iwl-scan.c iwlcoreTomas Winkler
This patch moves scan code to iwl-scan.c file in iwlcore module. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: add bad length check for WEP keysEmmanuel Grumbach
This patch adds a check for bad length in set key flow. This solves the Oops reported by Thomas Backlund, Joonwoo Park and Ian Schram. It also adds some debug printing that can be useful. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: refactor setting tx powerTomas Winkler
This patch 1. Refactors settings of tx power 2. enables iwconfig txpower <value> 3. adds 5000 HW tx power Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: refactor tx aggregation response flowTomas Winkler
This patch refactors tx aggregation respnse flow and fixes bug revealed by tx_info to cb patch Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: Fix mode changes (ad-hoc <--> managed)Assaf Krauss
This fix allows to move between modes (ad-hoc to managed, and vice versa). Since mode changes can only be done while driver is down, check for ibss support can only be made when the channel is set (afte the driver goes up). Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi enabling IBSS (Ad-Hoc) modeAssaf Krauss
This patch enables ibss mode. It consists of two changes upon entering ibss mode: 1. Removing the redundant line which clears the driver's station table. This line creates a discrepancy between the driver and the FW's station table. This prevented the generation of beacons. 2. Assigning a default value to priv's assoc_id. Normally given by an AP in STA mode, this field is used as an indication for association. Being 0, it prevented normal TX flow. 3. Remove a redundant ADD_STA command that cause uCode error. 4. Delay the set_mode until after the uCode is ready. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: fix resart flow after fw errorEmmanuel Grumbach
Clear STATUS_FW_ERROR in the _up_ flow before reseting NIC. UP flow will otherwise call restart again causing endless restart loop. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: fix resume SW RF-killMohamed Abbas
This patch fixes SW RF-kill. If we resumed from S3 state with SW RF-kill set, the driver wouldn't be able to remove SW RF-kill. This patch fixes this. Signed-off-by: Mohamed Abbas <mabbas@linux.intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: format log prints for easier parsingTomas Winkler
This patch changes uCode log print to for easier parsing. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: fix bug when moving from 11gn to 11a or 11an to 11gEmmanuel Grumbach
It is wrong to set the rxon channel according to the ht-channel in case there is a mismatch (e.g. when there is no ht). Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: remove redundant flags regarding to FAT channelEmmanuel Grumbach
This patch removes redundant flags regarding to FAT channel. Use mac80211's flag instead. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: remove unused flagTomas Winkler
This patch removes IEEE80211_CHAN_W_RADAR_DETECT flag. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: fix allow iwlwifi to aggregate according to tid loadRon Rindjunsky
This fix opens back the aggregation decision path for iwlwifi. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: use ieee80211_conf to examine rate capabilitiesRon Rindjunsky
This patch switches the use of internal iwlwifi structure with ieee80211_conf in order to examine ht rate capabilities. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: add TX aggregation code for 5000 HWTomas Winkler
This patch adds TX aggregation handler for 5000 HW. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: map sw and hw ampdu queuesRon Rindjunsky
This patch maps sw and hw queues (for aggregations), so the right mac80211 queue will be waken when ieee80211_wake_queue is invoked. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: add possibility to disable tx_power calibrationEmmanuel Grumbach
This patch adds the possibility to disable the tx_power calibration. In 5000 HW, this calibration is implemented in uCode, hence, it is disabled in driver by default. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: clean up in setup/cancel deferred workEmmanuel Grumbach
This patch makes some clean up in setup/cancel_deferred_work. iwl_setup_deferred_work does the work that is common to 4965 and 5000, then it calls to HW specific handlers. This patch also removes uneeded work_struct from iwl_priv. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: removes the RUN_TIME_CALIB ifdefEmmanuel Grumbach
This patch removes the possibility not to compile the run time calibrations. It also renames priv->sensitivity_work to priv->run_time_calib_work, and moves bg_run_time_calib to iwl4965_base since it is common to both: 4965 and 5000. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14libertas: rename some registers to clarify their meaningHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14libertas: check for old, unsupported hardwareHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14libertas: document register meaningsHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14libertas: fix interrupt issueHolger Schurig
This helps against lost interrupts and aids in debugging this. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14mac80211: implement EU regulatory domainTony Vroon
Implement missing EU regulatory domain for mac80211. Based on the information in IEEE 802.11-2007 (specifically pages 1142, 1143 & 1148) and ETSI 301 893 (V1.4.1). With thanks to Johannes Berg. Signed-off-by: Tony Vroon <tony@linx.net> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14nl80211: Fix comment merge errorMichael Buesch
The comments ended up in the wrong place due to a merge error. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14iwlwifi: removing IWL4965_HT configRon Rindjunsky
This patch removes CONFIG_IWL4965_HT #ifdefs for iwl 4965 and 5000. 11n feature is stable in those drivers and its mode of operation is determined in mac80211, so this dependency is not needed any more. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rndis_wlan: cleanup: rename and remove local pointersJussi Kivilinna
Mixed use of 'dev' and 'usbdev' for usbnet pointer can be confusing. So changing all 'usbnet *dev' to 'usbnet *usbdev'. Also remove 'net_device *net' pointer from 'rndis_wext_bind' as 'usbdev->net' were already used where needed. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rndis_wlan: check if set_multicast_list work is already scheduledJussi Kivilinna
Don't queue set_multicast_list work if WORK_SET_MULTICAST_LIST flag already set. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rndis_wlan: update carrier flag when link state changesJussi Kivilinna
Driver wasn't updating netif_carrier on link state changes but assumed link layer was always up. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rndis_wlan: do link-down state change in worker threadJussi Kivilinna
rndis_wext_link_change() is called from within rndis_command() so it isn't very good place to do any work. Move to worker thread. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14airo: use simple_read_from_buffer()Akinobu Mita
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Rework alignment check.Gertjan van Wingerde
Rework the alignment check in rt2x00dev.c to be independent of any potential alignment measures that may be taken before. Just check whether the payload is aligned based on the pointer addresses. Note: This is preparatory for the dynamically mapped skb buffers for the PCI drivers, as these need 4-byte alignment instead of the currently enforced offset by 2 bytes. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Remove unused definesIvo van Doorn
MAX_RX_SSI and MAX_NOISE are no longer used, it is better to remove them entirely. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Clear IEEE80211_TX_CTL_USE_RTS_CTS flag for RTS frameIvo van Doorn
For RTS/CTS-to-self frames the IEEE80211_TX_CTL_USE_RTS_CTS flag should be cleared for the tx_info flags. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Use __builtin_choose_expr() instead of ?:Ivo van Doorn
To really force the FIELD macros to determine the first bit of the register field we should use the __builtin_choose_expr() function. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Fix double usage of skb->cb in USB RX path.Gertjan van Wingerde
It is not safe to use the skb->cb area for both the rxd and skb_frame_desc data at the same time, while they occupy an overlapping piece of memory. This can lead to hard to trace crashes as pointers within skb_frame_desc are pointing into nowhere, or the rxd data is overwritten with non-sense. Fix it by copying the rxd to a small buffer on the stack. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Centralize RX packet alignment handling in rt2x00lib.Gertjan van Wingerde
When rt2x00pci will be switched over to dynamically mapped skb's instead of statically allocated DMA buffers, it no longer can handle alignment of RX packets in a copy step, and needs to implement the same scheme as rt2x00usb does. In order to make the patch on dynamically mapped skb's smaller, already centralize the alignment handling into rt2x00lib. This allows us to move more code in rt2x00lib, and thus remove code duplication between rt2x00usb and rt2x00pci. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Cleanup struct skb_frame_desc.Gertjan van Wingerde
The data and data_len fields aren't really necessary in struct skb_frame_desc, as they can be deduced from the skb itself. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Don't kick TX queue after each frameIvo van Doorn
TX queues shouldn't be kicked after each frame that is put into the queue. This could cause problems during RTS and CTS-to-self as well as with fragmentation. In all those cases you want all frames to be send out in a single burst. Off course we shouldn't let the queue fill up entirely, thus we introduce a 10% threshold which, when reached, will force the frames to be send out regardless of the frame. In addition we should prevent queues to become full in such a way that the tx() handler can fail. Instead of stopping the queue when it is full, we should stop it when it is below the threshold. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-14rt2x00: Move generic TX frame writing code into rt2x00queueIvo van Doorn
The write_tx_data functions in rt2x00pci and rt2x00usb have a lot in common. This moves that duplicate code into rt2x00queue_write_tx_frame(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 09:44:40 +0000