aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-04-22ath9k: Remove a few unused flagsSujith
This patch removes unused HW capability flags and HW operation variables, and a chainmask flag that we don't use anywhere. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: No need to abort Rx path when autosleep is enabled.Vivek Natarajan
For chipsets supporting autosleep feature, there is no need to abort Rx engine since they are capable of automatically going back to sleep after receiving a packet. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22b43: Do not "select" HW_RANDOMMichael Buesch
Auto-depend on HW_RANDOM, rather than "select"ing it. This way the user has the choice to enable or disable HWRNG support. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rt2x00: Fix Sparse warningIvo van Doorn
rt2x00link_reset_qual() is not declared in a header, and is only internally used within rt2x00link.c. It should be declared as static. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rt2x00: Move Move pci_dev specific access to rt2x00pciIvo van Doorn
pci_dev->irq and pci_name(pci_dev) access should be limited to rt2x00pci only. This is more generic and allows a rt2x00 pci driver to be controlled as PCI device but also as platform driver (needed for rt2800pci SoC support). Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ar9170: fix hang on stopChristian Lamparter
This patch fixes a locking problem which freezes the network core. The deadlock goes as follows: - ar9170_op_stop - is called 1. change the state to IDLE 2. > take the MUTEX < 3. cancel_SYNC all pending work, which means "block until a work_struct's callback has terminated" => if filter_config_work was queued it tries to get the MUTEX, before checking the device state... Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: fix scanning in AR2424Pavel Roskin
AR5K_PHY_PLL_40MHZ_5413 should not be ORed with AR5K_PHY_MODE_RAD_RF5112 for 5 GHz channels. The incorrect PLL value breaks scanning in the countries where 5 GHz channels are allowed. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath9k: Update maintainers for ath9kLuis R. Rodriguez
This has been the case really, we just forgot to update it. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: Add Michael MIC failure eventJouni Malinen
Define a new nl80211 event, NL80211_CMD_MICHAEL_MIC_FAILURE, to be used to notify user space about locally detected Michael MIC failures. This matches with the MLME-MICHAELMICFAILURE.indication() primitive. Since we do not actually have TSC in the skb anymore when mac80211_ev_michael_mic_failure() is called, that function is changed to take in the TSC as an optional parameter instead of as a requirement to include the TSC after the hdr field (which we did not really follow). For now, TSC is not included in the events from mac80211, but it could be added at some point. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: Generate deauth/disassoc event for locally generated framesJouni Malinen
Previously, nl80211 mlme events were generated only for received deauthentication and disassociation frames. We need to do the same for locally generated ones in order to let applications know that we disconnected (e.g., when AP does not reply to a probe). Rename the nl80211 and cfg80211 functions (s/rx_//) to make it clearer that they are used for both received and locally generated frames. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: Require auth type for NL80211_CMD_AUTHENTICATEJouni Malinen
NL80211_ATTR_AUTH_TYPE is a required parameter for NL80211_CMD_AUTHENTICATE. We are currently (by chance) defaulting to open system authentication if the attribute is not specified. It is better to just reject the invalid command. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: remove duplicated #includeHuang Weiyi
Remove duplicated #include in net/wireless/core.h. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22cfg80211: remove duplicated #includeHuang Weiyi
Remove duplicated #include in include/net/cfg80211.h. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rfkill-input: remove unused codeJohannes Berg
There's a lot of rfkill-input code that cannot ever be compiled and is useless until somebody needs and tests it -- therefore remove it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rfkill: remove user_claim stuffJohannes Berg
Almost all drivers do not support user_claim, so remove it completely and always report -EOPNOTSUPP to userspace. Since userspace cannot really drive rfkill _anyway_ (due to the odd restrictions imposed by the documentation) having this code is just pointless. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rfkill: remove deprecated state constantsJohannes Berg
I only did superficial review, but these constants are stupid to have and without proper warnings nobody will review the code anyway, no amount of shouting will help. Also fix wimax to use correct states. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22nl80211: validate some input betterJohannes Berg
This patch changes nl80211 to: * validate that any IE input is a valid IE (stream) * move some validation code before locking * require that a reason code is given for both deauth/disassoc Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22mac80211: Don't access managed mode bits in non-managed modeVasanthakumar Thiagarajan
This fixes a stupid bug introduced in 25f85c31d4f.. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: compensate firmware alignment bug in p54spi_rxMax Filippov
Firmware may insert up to 4 padding bytes after the lmac header, but it does not amend the size of SPI data transfer. Such packets has correct data size in header, thus referencing past the end of allocated skb. Put extra 4 bytes to the end of the received skb to compensate for this case. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwl3945: use iwl_mac_conf_txAbhijeet Kolekar
3945 now uses iwl_mac_conf_tx. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22iwlwifi: merge and better support of suspend/resume for iwlagn and iwl3945Wey-Yi Guy
With mac80211's help to call stop() and start() in mac80211 suspend/resume function, both iwlagn and iwl3945 no longer calling stop() and start(); remove un-necessary STATUS_IN_SUSPEND bit from both header files and functions, Move apm_ops.stop() function into pci_suspend() to ensure DMA is stopped before go into suspend mode. iwl3945 has the similar suspend/resume function as iwlagn, so move both functions to iwlcore to be shared by both drivers. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: fix p54spi_tx_frame DMA transfer initiation and skb cleanupMax Filippov
p54spi_tx_frame wasn't waiting for HOST_ALLOWED in SPI_ADRS_DMA_WRITE_CTRL. This resulted in frequent 'WR_READY timeout' on beacon resubmission. Also don't free skb on error path, as it gets freed on p54spi_wq_tx. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22libertas: support mesh for various firmware versionsBing Zhao
CMD_MESH_CONFIG command ID and a couple of structure members in TxPD, RxPD have been changed in firmware version 10.x.y.z and newer. Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: fix p54spi_upload_firmwareMax Filippov
Instead of firmware itself p54_upload_firmware was sending to the device content of struct firmware and the following random garbage. Notice '&' before priv->firmware->data at p54spi_spi_write. But simple removing of '&' sign triggered BUG_ON at dma_cache_maint. Thus kmemdup - kfree workaround. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22p54spi: mask value read from SPI_ADRS_DMA_WRITE_CTRL in p54spi_wait_bitMax Filippov
Mask value read from SPI_ADRS_DMA_WRITE_CTRL in p54spi_wait_bit. Without this, 'fw_upload not allowed to DMA write' is observed at both N800 and N810. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22e1000/e1000e/igb/ixgb: do not use netif_wake_queue un-necessarilyJesse Brandeburg
It was pointed out that the Intel wired ethernet drivers do not need to wake the tx queue since netif_carrier_on/off will take care of the qdisc management in order to guarantee the correct handling of the transmit routine enable state. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21sa1100_ir: fix build breakageAlexander Beregalov
Fix simple typo. Caused by commit a1de966682551debbe690672e760487cc555c05f ("irda/sa1100_ir: convert to net_device_ops"). Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tun: fix tun_chr_aio_write so that aio worksMichael S. Tsirkin
aio_write gets const struct iovec * but tun_chr_aio_write casts this to struct iovec * and modifies the iovec. As a result, attempts to use io_submit to send packets to a tun device fail with weird errors such as EINVAL. Since tun is the only user of skb_copy_datagram_from_iovec, we can fix this simply by changing the later so that it does not touch the iovec passed to it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tun: fix tun_chr_aio_read so that aio worksMichael S. Tsirkin
aio_read gets const struct iovec * but tun_chr_aio_read casts this to struct iovec * and modifies the iovec. As a result, attempts to use io_submit to get packets from a tun device fail with weird errors such as EINVAL. Fix by using the new skb_copy_datagram_const_iovec. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21net: skb_copy_datagram_const_iovec()Michael S. Tsirkin
There's an skb_copy_datagram_iovec() to copy out of a paged skb, but it modifies the iovec, and does not support starting at an offset in the destination. We want both in tun.c, so let's add the function. It's a carbon copy of skb_copy_datagram_iovec() with enough changes to be annoying. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21ucc_geth: Move freeing of TX packets to NAPI contextJoakim Tjernlund
This will make the system alot more responsive while ping flooding the ucc_geth ethernet interface. Also set NAPI weight to 64 as this is a common value. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21rtl8139: unify the struct's nameJianjun Kong
unify the struct's name of "struct rtl8139_private *np" to "struct rtl8139_private *tp" most of them like this: struct rtl8139_private *tp = netdev_priv(dev); Signed-off-by: Amos Kong <jianjun@zeuux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21net: factor out ethtool invocation of vlan/macvlan driversPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21usb driver for intellon int51x1 based PLC like devolo dlan duoPeter Holik
usb driver for intellon int51x1 based PLC like devolo dlan duo with improvements suggested by the guys of the mailinglist: - name and prefix with int51x1 (Florian Fainelli) - use conversion functions cpu_to_le16 / le16_to_cpu (Oliver Neukum) - use pskb_may_pull instead of skb->len (Ilpo Järvinen) - better code in tx_fixup (Ilpo Järvinen) - use gotos for error handling (Ilpo Järvinen) - better description (Jon Smirl) Signed-off-by: Peter Holik <peter@holik.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether.cPeter Holik
because of using the same function get_ethernet_addr as cdc_ether.c i export usbnet_get_ethernet_addr from usbnet and fixed cdc_ether (suggested by Oliver Neukum). Signed-off-by: Peter Holik <peter@holik.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tg3: Update version to 3.99Matt Carlson
This patch updates the tg3 version to 3.99. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tg3: Restore LAA sooner in shutdown sequenceMatt Carlson
After a shutdown reset, the LAA needs to be restored before posting the post-reset signature in shared memory. If the LAA is not restored before then, the bootcode will assume the factory default MAC address and WOL will not work with the LAA. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tg3: Limit CLKREQ fix to A[01] of 57780 asic revMatt Carlson
This patch restricts the CLKREQ bugfix to the A0 and A1 revisions of 57780 ASIC rev chips. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tg3: Allow 5761 WOL and LED fixes to 5761S tooMatt Carlson
The 5761 WOL and LED fixes used the PCI device ID to as the activation key. The 5761S requires the same process. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tg3: Prevent send BD corruptionMatt Carlson
On rare occasions, send BD corruptions can occur. This patch fixes the problem by increasing the L1 entry threshold to 4 milliseconds. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tg3: Handle NVRAM absent casesMatt Carlson
Some 57780 ASIC revision parts do not have NVRAM. Code the driver so that it is tolerant of this configuration. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21tg3: Allow screaming interrupt detectionMatt Carlson
The tg3 driver's ISR is coded to accept interrupts as its own if the status block tag does not equal the last tag the driver has seen. The last_tag field is updated from tg3_poll. In a screaming interrupt situation from another device sharing tg3's IRQ, tg3_poll does not get a chance to be called, so the last_tag will always be out of sync with the status block tag. Consequently, the driver will continually declare the screaming interrupts as its own, thus thwarting the screaming interrupt detection logic. This patch solves the problem by creating a new last_irq_tag member and recording the status block tag in the ISR. The ISR then checks the last_irq_tag for interrupt ownership. Many thanks to John Marvin for the detailed bug report and analysis and Michael Chan for the bugfix. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Tested-by: John Marvin <jsm@fc.hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-21Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/core/dev.c
2009-04-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-04-20tg3: Fix SEEPROM accessesMatt Carlson
The recent NVRAM patches sanitized how the driver deals with NVRAM data, but they failed to bring the SEEPROM interfaces inline with the new strategy. This patch brings the SEEPROM interfaces up to date. This patch also reverts commit 0d489ffb76de0fe804cf06a9d4d11fa7342d74b9 ("tg3: fix big endian MAC address collection failure"). Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Tested-by: Robin Holt <holt@sgi.com> Tested-by: James Bottomley <james.bottomley@HansenPartnership.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-20mac80211: fix basic rate bitmap calculationJohannes Berg
"mac80211: fix basic rates setting from association response" introduced a copy/paste error. Unfortunately, this not just leads to wrong data being passed to the driver but is remotely exploitable for some hardware or driver combinations. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org [2.6.29] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20mac80211: fix beacon loss detection after scanKalle Valo
Currently beacon loss detection triggers after a scan. A probe request is sent and a message like this is printed to the log: wlan0: beacon loss from AP 00:12:17:e7:98:de - sending probe request But in fact there is no beacon loss, the beacons are just not received because of the ongoing scan. Fix it by updating last_beacon after the scan has finished. Reported-by: Jaswinder Singh Rajput <jaswinder@kernel.org> Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20nl80211: Make nl80211_send_mlme_event() atomicJouni Malinen
One of the code paths sending deauth/disassoc events ends up calling this function with rcu_read_lock held, so we must use GFP_ATOMIC in allocation routines. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20ar9170usb: fix hang on resumeChristian Lamparter
This patch fixes a hang on resume when the filesystem is not available and request_firmware blocks. However, the device does not accept the firmware on resume. and it will exit with: > firmware part 1 upload failed (-71). > device is in a bad state. please reconnect it! Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-20MAC80211: Remove unused MAC80211_VERBOSE_SPECT_MGMT_DEBUG.Robert P. J. Day
Remove this unused Kconfig variable, which Intel apparently once promised to make use of but never did. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>