aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-06-25V4L/DVB (3830): Fix display name for LG TDVS-H06xFMichael Krufky
This patch fixes the display name for LG TDVS-H06xF tuners in both tuner and dvb-pll modules. Changing the names of the actual pll_desc struct and tuner definitions has been held back until after the dvb tuner refactoring gets merged. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3827): Cx88-blackbird: clean up the buffers when closing the MPEG ↵Valentin Zagura
stream This patch cleans up the buffer queue when the MPEG stream is closed, preventing the message, 'cx8802_timeout' Signed-off-by: Valentin Zagura <puthre@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3820): Drivers/media/dvb/dvb-usb/: possible cleanupsAdrian Bunk
- make the following needlessly global struct static: dvb-usb/cxusb.c: cxusb_mt352_config Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3817): KWorld HardwareMpegTV XPert: set encoder video standard ↵Michael Krufky
based on tvnorm The KWorld HardwareMpegTV XPert uses a multistandard tuner, tda8290 + tda8275. Without checking the video standard in blackbird_probe, the encoder defaults to PAL, even if the incoming video stream is NTSC. This patch checks the video standard set by the cx2388x decoder, and sets the encoding height and frame accordingly. This patch is designed to only affect the KWorld HardwareMpegTV XPert. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3814): Add support for Samsung TCPG 6121P30A PAL tuner.Hans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3811): Cxusb: lgh064f: set auxiliary byte in pll_setMichael Krufky
This changeset removes pll_init, and instead sets the tuner auxiliary byte in pll_set. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3810): KWorld HardwareMpegTV XPert: Enable Blackbird MPEG encoder ↵Michael Krufky
support - clear I2SIN to deliver the audio stream to the cx23416 mpeg encoder. - enable blackbird support on the KWorld HardwareMpegTV XPert Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3809a): Remove compat stuff for DMX_GET_EVENTAndrew Morton
The ioctl were removed by: V4L/DVB (3727): Remove DMX_GET_EVENT and associated data structures due to the ioctl DMX_GET_EVENT has never been implemented, and also scrambling events can't be generated in a useful way by the hardware. This patch removes the corresponding entry at fs/compat_ioctl.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3807): Cx88-blackbird: fix typoMichael Krufky
BLACKBIRD_FIELD1_SAA7115 was repeated. Corrected version reads: blackbird_api_cmd(dev, BLACKBIRD_API_SET_CAPTURE_LINES, 2, 0, BLACKBIRD_FIELD1_SAA7115, BLACKBIRD_FIELD2_SAA7115 ) Thanks-to: Valentin Zagura <puthre@gmail.com> for pointing this out. Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3806): Cx88-blackbird: allow proper detection of PAL vs. NTSC video ↵Michael Krufky
standard - removed test for CX88_BOARD_HAUPPAUGE_ROSLYN prior to determining whether the video standard in use is NTSC or PAL. Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3805): Fix KNC1 card frontend detectionAndrew de Quincey
Since I reordered the CI/frontend detection, it turns out the frontend needs to have a GPIO set to power it on; otherwise frontend init fails. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3801): Cx88-tvaudio: replace 'if' with 'switch..case'Michael Krufky
This patch cleans up a potential mess that has yet to occur in the card-specific part of cx88-tvaudio.c that sets sound input from external adc. It may be a good idea to move this setting into cx88-cards.c in the future. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3800): Cx88: added support for KWorld MCE 200 DeluxeValentin Zagura
This patch adds support for KWorld MCE 200 Deluxe. Raw video is working perfectly, MPEG capture using cx88-blackbird is also working, but the quality could be improved. svideo and radio until they can be tested also. Signed-off-by: Valentin Zagura <puthre@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3757): Fix alignment after the replacement from semaphore to muxexTrent Piepho
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3770): Kill drivers/media/common/saa7146_vv_ksyms.cAdrian Bunk
This patch moves the EXPORT_SYMBOL's from drivers/media/common/saa7146_vv_ksyms.c to the files with the actual functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3769): Fix a type error in dvb_frontend.cUwe Bugla
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3768): Fix a tab error in cx14110.c, dprintkUwe Bugla
Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3765): Dvb-bt8xx: add support for DViCO FusionHDTV DVB-T Lite 2nd ↵Michael Krufky
revision This patch adds support for the new revision of the DViCO FusionHDTV DVB-T Lite, based on the zl10353 demod instead of mt352. Both mt352 and zl10353 revisions of this card have the same PCI subsystem ID. Acked-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Ack'd-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3764): Lgdt330x: update supported cards list in commentsMichael Krufky
- pcHDTV HD5500 ATSC/QAM uses LG DT3303 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3762): Add sysfs device links to dvb devicesAndrew de Quincey
Currently in /sys/class/dvb/dvbX.demuxY/ we have: dev uevent With the patch, we have (for a PCI DVB device): dev device -> ../../../devices/pci0000:00/0000:00:1e.0/0000:03:0d.0 uevent So userspace tools can (finally) work out which physical device a DVB adapter refers to. Previously you had to kinda look through dmesg and hope that it hadn't been dumped out of the buffer. This makes debugging a lot easier if the system has been up for a long time! This is done by adding an extra 'struct device *' parameter to dvb_register_adapter(). It will work with any kind of standard linux 'device'. Additionally, if someone has an embedded system which does things differently, they can simply supply 'NULL' and the behaviour will be as before - the link will simply not appear. Ack'd-by: Manu Abraham <manu@linuxtv.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3761): Silence some dprintk's in cx88-mpegTrent Piepho
Changeset 395c7c4d8f0c changed several dprintks from level 1 to level 0 (always on). They generate four lines every time DMA starts, which don't containing any information with a use outside of debugging. This turns them back to level 1. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3753): Whitespace cleanups at media/radioMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3741): Budget-core doesn't check if register adapter failsAndrew de Quincey
If you have more than DVB_MAX_ADAPTERS in your machine, this causes an oops. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3739): Add support for FE_GET_FRONTEND to or51132 frontendTrent Piepho
Adds the FE_GET_FRONTEND ioctl to the or51132 frontend. Current modulation is read from the hardware, while frequency is taken from the driver's state. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3736): Cx88 cleanup: move CX88_BOARD_PCHDTV_HD5500 to the end of ↵Michael Krufky
the cards array - new cards should always be added to the end of the list. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3735): Add support for pcHDTV HD5500 ATSC/QAMRusty Scott
Added card definitions for the pcHDTV HD5500 ATSC/QAM card Signed-off-by: Rusty Scott <rustys@ieee.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3727): Remove DMX_GET_EVENT and associated data structuresAndreas Oberritter
The ioctl DMX_GET_EVENT has never been implemented. I guess no software is using it because of its lack of implementation. Future software won't use it, too, because this API doesn't make much sense the way it is: Frontend events have their own different API. Scrambling events can't be generated in a useful way by the hardware I know of. Signed-off-by: Andreas Oberritter <obi@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3724): Remove a wee bit of cruftTrent Piepho
A few lines that do nothing in the or51132 frontend, removed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3723): Avoid unnecessary firmware re-loads in or51132 frontendTrent Piepho
As QAM_64, QAM_256, and QAM_AUTO all use the same firmware, switching between these modulations doesn't require a firmware re-load. This also fixes a mishandled error condition, in which the firmware file is loaded into the kernel, the clock mode is changed, but then the firmware upload to the device fails. The modulation change is aborted, but the clock mode would still be changed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3721): Fix spellingTrent Piepho
It's "Terrestrial" Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3720): Fix spelling error / typo in commentsMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3718): Removed trailing newlinesMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3715): Change all emails to the currently used one.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3712): Fix video input setting of em28xx, use _INT_S_VIDEO_ROUTING ↵Hans Verkuil
in tvp5150 - Use new routing input defines in em28xx-cards.c - Fix S-Video settings for tvp5150-based cards (input was copied from saa7115 based cards and worked only because S-Video was selected in the default: case) - Replace VIDIOC_S_INPUT by VIDIOC_INT_S_VIDEO_ROUTING in em28xx-video.c - Remove the now obsolete VIDIOC_S_INPUT handler in saa7115.c - Add VIDIOC_INT_G/S_VIDEO_ROUTING in tvp5150.c - Add new media/tvp5150.h with the routing defines. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3711): Add support for VIDIOC_INT_S_CRYSTAL_FREQ internal command.Hans Verkuil
Some saa7115-based cards use a different crystal frequency and a different audio clock generation. Add a new VIDIOC_INT_S_CRYSTAL_FREQ command to be able to set these values. Also change the default APLL setting to 0. It makes no sense to have the audio clock independent from the video clock, this can lead to audio/video synchronization problems. Setting this to 0 is also consistent with the old saa7114.c source and the way the Hauppauge Windows driver sets it. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3709): Improve line-in handlingHans Verkuil
- improve handling of the EXTERN input: don't start an unnecessary carrier scan - improve the LOG_STATUS output - ensure that a carrier scan is started again when switching back to the tuner. - set correct prescale for L-NICAM Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25V4L/DVB (3708a): Clean up some cruft in or51132 frontendTrent Piepho
There is some old code in the or51133 firmware loading function that has no effect. Left a comment to in case it helps someone trying to reverse engineer the chip. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-24Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits) [ARM] 3648/1: Update struct ucontext layout for coprocessor registers [ARM] Add identifying number for non-rt sigframe [ARM] Gather common sigframe saving code into setup_sigframe() [ARM] Gather common sigframe restoration code into restore_sigframe() [ARM] Re-use sigframe within rt_sigframe [ARM] Merge sigcontext and sigmask members of sigframe [ARM] Replace extramask with a full copy of the sigmask [ARM] Remove rt_sigframe puc and pinfo pointers [ARM] 3647/1: S3C24XX: add Osiris to the list of simtec pm machines [ARM] 3645/1: S3C2412: irq support for external interrupts [ARM] 3643/1: S3C2410: Add new usb clocks [ARM] 3642/1: S3C24XX: Add machine SMDK2413 [ARM] 3641/1: S3C2412: Fixup gpio register naming [ARM] 3640/1: S3C2412: Use S3C24XX_DCLKCON instead of S3C2410_DCLKCON [ARM] 3639/1: S3C2412: serial port support [ARM] 3638/1: S3C2412: core clocks [ARM] 3637/1: S3C24XX: Add mpll clock, and set as fclk parent [ARM] 3636/1: S3C2412: Add selection of CPU_ARM926 [ARM] 3635/1: S3C24XX: Add S3C2412 core cpu support [ARM] 3633/1: S3C24XX: s3c2410 gpio bugfix - wrong pin nos ...
2006-06-24Revert "[PATCH] usb: drivers/usb/core/devio.c dereferences a userspace pointer"Linus Torvalds
This reverts commit 786dc1d3d7333f269e17d742886eac2188a2d9cc. As Al so eloquently points out, the patch is crap. The old code was fine, the new code was bogus. It never dereferenced a user pointer, the "->" operator was to an array member, which gives the _address_ of the member (in user space), not an actual dereference at all. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-24Merge signal handler branchRussell King
2006-06-24[ARM] 3648/1: Update struct ucontext layout for coprocessor registersDaniel Jacobowitz
Patch from Daniel Jacobowitz In order for userspace to find saved coprocessor registers, move them from struct rt_sigframe into struct ucontext. Also allow space for glibc's sigset_t, so that userspace and kernelspace can use the same ucontext layout. Define the magic numbers for iWMMXt in the header file for easier reference. Include the size of the coprocessor data in the magic numbers. Also define magic numbers and layout for VFP, not yet saved. Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24Merge branch 'drm-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: radeon constify radeon microcode Add i915 ioctls to configure pipes for vblank interrupt. drm: update radeon to 1.25 add r200 vertex program support drm: radeon add a tcl state flush before accessing tcl vector space
2006-06-24Merge branch 'intelfb-patches' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6 * 'intelfb-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6: intelfb delousing
2006-06-24Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (40 commits) [SPARC64]: Update defconfig. [SPARC64]: Make auxio a real driver. [PARPORT] sunbpp: Convert to new SBUS device framework. [Documentation]: Update probing info in sbus_drivers.txt [SCSI] qlogicpti: Convert to new SBUS device framework. [SCSI] esp: Fix bug in esp_remove_common. [NET] sunhme: Kill useless loop over sdevs in quattro_sbus_find(). [NET] myri_sbus: Kill unused next_module struct member. [NET] myri_sbus: Convert to new SBUS device layer. [NET] sunqe: Convert to new SBUS driver layer. [NET] sunbmac: Convert over to new SBUS device framework. [NET] sunlance: Convert to new SBUS driver framework. [NET] sunhme: Convert to new SBUS driver framework. [NET] sunhme: Kill __sparc__ and __sparc_v9__ ifdefs. [SCSI] sparc: Port esp to new SBUS driver layer. [SOUND] sparc: Port amd7930 to new SBUS device layer. [SBUS]: Rewrite and plug into of_device framework. [SPARC]: Port of_device layer and make ebus use it. [SPARC]: Port sparc64 in-kernel device tree code to sparc32. [SPARC64]: Add of_device layer and make ebus/isa use it. ...
2006-06-24Enable minimal per-device resume tracingLinus Torvalds
This is the minimal resume trace code to find which device resume (if any) results in problems. Usually, you'd use the information this generates as a starting point to adding more fine-grained trace event points. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-24Add some basic resume trace facilitiesLinus Torvalds
Considering that there isn't a lot of hw we can depend on during resume, this is about as good as it gets. This is x86-only for now, although the basic concept (and most of the code) will certainly work on almost any platform. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-24[ARM] Add identifying number for non-rt sigframeRussell King
GDB couldn't reliably tell the difference between the old and new non-rt sigframes, so provide it with a number at the beginning which will never appear in the old sigframe, and hence provide gdb with a reliable way to tell the two apart. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-24Merge S3C24xx branchRussell King
2006-06-24Merge ep93xx branchRussell King
2006-06-24[ARM] 3647/1: S3C24XX: add Osiris to the list of simtec pm machinesBen Dooks
Patch from Ben Dooks Enable power management for Simtec Osiris Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 19:00:48 +0000